Database Info

[Q] infuse freeze

Please help. I just put the recovery 3e on the phone via root explorer and when i rebooted the phone is stock in samsung scren help please

jorgecolon said:
Please help. I just put the recovery 3e on the phone via root explorer and when i rebooted the phone is stock in samsung scren help please
Click to expand...
Click to collapse
Search this Forum for GTGs ultimate unbrick. Your phone is likely hosed for some reason .
Just my 2¢

I agree with omni. On my first attempt, something went wrong with the recovery load and unbrick got me off the Samsung screen.

Is it so hard to post in the correct sections
E3D

I try but it didn't work the odin never recognizes the phone ##

jorgecolon said:
I try but it didn't work the odin never recognizes the phone ##
Click to expand...
Click to collapse
Different USB cable. Different port. Different computers. Different phone. Lol...
Sent from my SAMSUNG-SGH-I997 using Tapatalk

thanks for the advice it work but, i have a problem the rom manager and titanium back up doesn't open.

[Q] My dead tab

Hey xda i have samsung tab p6200 and it is being dead..when i connect it to a charger it shows a bttery with triangle..and i can go into download mode but not recovery mode..and i m trying to flash with odin but dont know really how to flash..it freezes at setup connection and i relly dont know how to seleect files for pda bootloader etc..please sumone help me with it..can my tab be fixed to normal?? ..i wan to install indian firmware.plzzz reply..

As long as you can boot into download mode, your tab isn't dead. Now, make sure you have a copy of the .tar file you want to flash in ODIN.
Connect your tab to your computer. Give it some time as your computer *might* need to download and install some Samsung drivers for the tab.
Once its done, launch ODIN. On the top left box, you should see some sort of "comp" message with numbers. This will tell you ODIN is correctly reading your tab. Now, below the boxes to the left will be some options listed as "repartition", "Autoreboot", and "F.Reset". Make you UNCHECK repartition AND f.reset. So autoreboot should be the ONLY option checked. Now, to the right you'll see some slots that say "phone", "PDA", "Bootloader", etc. ONLY click on the "PDA" slot and load your .tar file. Now click "start" and let ODIN work its magic. When the firmware flash is complete, your tab will reboot on its own.
Sent from my SPH-D700 using xda premium

Ceelos09 said:
As long as you can boot into download mode, your tab isn't dead. Now, make sure you have a copy of the .tar file you want to flash in ODIN.
Connect your tab to your computer. Give it some time as your computer *might* need to download and install some Samsung drivers for the tab.
Once its done, launch ODIN. On the top left box, you should see some sort of "comp" message with numbers. This will tell you ODIN is correctly reading your tab. Now, below the boxes to the left will be some options listed as "repartition", "Autoreboot", and "F.Reset". Make you UNCHECK repartition AND f.reset. So autoreboot should be the ONLY option checked. Now, to the right you'll see some slots that say "phone", "PDA", "Bootloader", etc. ONLY click on the "PDA" slot and load your .tar file. Now click "start" and let ODIN work its magic. When the firmware flash is complete, your tab will reboot on its own.
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
Just follow the advice from Ceelos09
Sent from my SGH-I717 using xda premium

Thankss a lot bro!! ..i will check if it works..

androidfreak16 said:
Thankss a lot bro!! ..i will check if it works..
Click to expand...
Click to collapse
If u have any more questions, just let me know. I'll help with what I can
Sent from my SPH-D700 using xda premium

Guess wot..my tab is working now....well i had questions but not bout tab about my new phone samsung galaxy advance i9070..i juss wanted to know if there is any clockworkmod recovery for tht..nd i cant find xda forum..

androidfreak16 said:
Guess wot..my tab is working now....well i had questions but not bout tab about my new phone samsung galaxy advance i9070..i juss wanted to know if there is any clockworkmod recovery for tht..nd i cant find xda forum..
Click to expand...
Click to collapse
Glad its working now
As for your phone, some devices dnt get their own subforum here on XDA. Maybe try using the search function? And if there is in fact no subforum for it here on XDA, a google search is bound to bring up communities on other websites that are working on development for the Galaxy Advance.
Edit: Seems that there's only a root method here on XDA, nothing more :\ Google might be your best bet for CWM bud
Sent from my SPH-D700 using xda premium

help!!!!!!!!!!!!!!!!!!!!!!

i was on ics but I planned to go back to gb my usb port had some problems so I had to put usb wire tightly to flash 2.3.6 firware from odin but it did not boot because it could not mount data that is I could not factory reset now the phne is not being recognized by the computer please is there a way of rooting from Samsung recovery so that I can go back to ics

http://forum.xda-developers.com/showthread.php?t=1822626
Heimdall>Odin

One heck of a sentence you had there!
Sent from my SGH-T959V using xda app-developers app

phone is not being recognised by the pc so how can i use heimdall

So can you not get into download mode?

I can get into the download mode but when I connect the phone there is no response from the computer

I've been trying to get people here to download mobile Odin lite and run it...send their file to chainfire so our device could get the support for it but....I guess they just don't understand what we are missing out on.
I've sent him what was asked for but if others wont jump in and do their part....I give up.
All he asks for is a .pit,a kernal,and the mobileodin.txt that is generated from the mobile Odin program

I think you need to connect your phone in download mode go into device manager and delete all the drivers under the USB section and try these steps
TwitchyEye said:
1. Go here and download heimdall suite.
https://github.com/Benjamin-Dobell/Heimdall/downloads
2. Extract and open drivers folder.
3. Connect your phone in download mode.
4. Run zadig and click show all devices, your phone should then show up in the list.
5. Click install drivers, it should say drivers successfully installed.
6. Try running the heimdall one-click of your choice.
7. Go back to step 3 and flash it again this time with bootloaders.
If it still fails, uninstall whatever USB drivers you have (one guy says he had to uninstall all of them, usually just the phone will do) reboot the pc and try again.
Actually you should go ahead and do this last thing first.
Godspeed
Sent from my SGH-T959V using xda premium
Click to expand...
Click to collapse

Hi Carl
Did you open a thread for this?
I'm not sure it will be possible to odin straight to MTD.
sent from me

Shortbus-Driver said:
I've been trying to get people here to download mobile Odin lite and run it...send their file to chainfire so our device could get the support for it but....I guess they just don't understand what we are missing out on.
I've sent him what was asked for but if others wont jump in and do their part....I give up.
All he asks for is a .pit,a kernal,and the mobileodin.txt that is generated from the mobile Odin program
Click to expand...
Click to collapse
Why don't you do it? Lol jk. How do I do it though? And will it brick my phone?

itzik2sh said:
Hi Carl
Did you open a thread for this?
I'm not sure it will be possible to odin straight to MTD.
sent from me
Click to expand...
Click to collapse
No its in magda623 thread in general where he claims it works on his phone .
Its basically Odin on your phone so you can flash back to stock for what ever reason....whether returning back to bml from mtd or a soft brick etc. Without having to hook up to your computer.
Lol no it won't brick you it simply creates a txt file that you send to chain fire so he can see what he needs to do to make our device compatable.

[Q] I locked the phone? how I can fix this

Hi how you doing!
First of all wanted to thank the entire community of developers for the effort made to us! :good::good:
I tried to return to stock my infuse with odin and I was wrong to choose the phone, then select the file pda again . The process is not complete, then turning off the phone shows me that image. I can not activate the download mode and the recovery. The pc recognizes the phone but nothing happens even odin doesn't recognize
tanks and i apologize for my bad English.

Reinstall your drivers you can flash from that screen its like download mode.Try different cords and USB ports too.Good luck.
Sent from my SGH-I997 using xda premium

thanks for the quick response! how i can reinstall my drivers? i mean... how i delete the previous drivers?

gta89 said:
thanks for the quick response! how i can reinstall my drivers? i mean... how i delete the previous drivers?
Click to expand...
Click to collapse
Download Kies from Samsung. It is big but it had the USB drivers you need.
Sent from my SGH-I997 using xda app-developers app

thanks for the answers guys, i pass the logo and get the stock room w/root. Now my problem is i cant instal CWM!!!

When I'm back to stock I Odin entropy (spelled wrong I know) kernal but then I can get into cwm then flash away.
Sent from a liquid smooth Infuse.

[Completed] [Q] Bricked Samsung S4 ? HELP PLEASEEEE

Hello My name is Victor and I F***ED UP :crying:
So I was doing a phone encryption and it was taking 3 hours so I thought It didn't work and took the battery out ( I WAS ROOTED AT THE TIME ) and then all the problems started, I got a boot loop but managed to fix that with Odin 3.10.6, Then It wouldn't go into home screen ( The Language was German and it said "Encryption Failed Please Reset Phone" or something like that, after that I found my self in a position where I tried Odin again and It failed and I got a screen saying "firmware upgrade encountered an issue, Please Select Recovery mode in Kies & Try again" ( I got told this is a BRICKED phone now and CAN'T do anything about it. so I tried Kies and it doesn't recognize my device and when I go to recovery in Kies and type in my model in Kies Crashes :crying: I have no idea what to do, everything I try Failes in Odin and cant do anything. Also in Odin the box that should turn yellow or blue doesn't do that, but it says it's been added.
P.s The files I used
AP_I9505XXUHOA7_CL3996895_QB3867680_REV06_user_low_ship_MULTI_CERT.tar.md5
BL_I9505XXUHOA7_CL3996895_QB3867680_REV06_user_low_ship_MULTI_CERT.tar.md5
CP_I9505XXUHOA7_CL3996895_QB3867680_REV06_user_low_ship_MULTI_CERT.tar.md5
CSC_OXA_I9505OXAHOA7_CL3996895_QB3867680_REV06_user_low_ship_MULTI_CERT.tar.md5
I also have a file called JFLTE_EUR_OPEN.pit but have no idea what it is.
PLEASE HELP ME :crying: :crying: Thank you to every one that takes their time to read this even if you don't answer THANK YOU

Hi thank you for using XDA Assist. Try getting the stock firmware from Samsung-updates.com or sammobile.com. You'll download a zip file. Extract it using 7-zip or winrar. Use the resulting .tar.md5 file in Odin, PA for the latest versions of Odin. Don't use a pit file. If you need further help you can ask in your device's specific forum here, http://forum.xda-developers.com/galaxy-s4. They are the experts on your device.

ronaldosmeq said:
Try to flash it with odin 3.09. If that doesn't work, try a different firmware.
Sent from my GT-I9001 using XDA Free mobile app
Click to expand...
Click to collapse
I tried it and still nothing keeps failing

jd1639 said:
Hi thank you for using XDA Assist. Try getting the stock firmware from Samsung-updates.com or sammobile.com. You'll download a zip file. Extract it using 7-zip or winrar. Use the resulting .tar.md5 file in Odin, PA for the latest versions of Odin. Don't use a pit file. If you need further help you can ask in your device's specific forum here, http://forum.xda-developers.com/galaxy-s4. They are the experts on your device.
Click to expand...
Click to collapse
I tried it and when it gets to SYSTEM it does a bit of progress and FAILS :/

Th3Pr0MaQ said:
I tried it and when it gets to SYSTEM it does a bit of progress and FAILS :/
Click to expand...
Click to collapse
Does the box in Odin that changes color to show your connected turn yellow or blue? If not, go to device manager on your pc. Do you see an icon with a yellow exclamation mark? If so, right click it and go to where it lets you choose from a list on your computer. Choose android adb composite interface.
Also, use the usb ports in the back of your pc, not the ones on the front.
Sent from my Nexus 5 using XDA Free mobile app

Thread closed.