ClockworkMod Recovery 6.0.2.7 for LG MSM7x27 Devices (P500, P505, P506, and P509)
ClockworkMod Recovery 6.0.2.7 is here for the LG Optimus One Family!!
Basically I wanted a new version of CWM for my P506 and I decided I'd make it public
cyanogen said:
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
New Key Mapping
Scroll: Vol up and down or home and back
Up to top of list: Menu (different from CWM 5)
Select: Search (different from CWM 5)
Downloads:
The links here are the latest and most stable builds.
Latest Builds:
LInks withheld due to major errors.
Click to expand...
Click to collapse
The search key in P500 doesn´t work. i can´t doing nothing :crying:
And now?
marcomarinho9 said:
The search key in P500 doesn´t work. i can´t doing nothing :crying:
And now?
Click to expand...
Click to collapse
Weird... Let me try it here.
Do I just flash the zip? BTW awesome job keeping our Opt Ones alive! CM10, CWM 6!
This is a zip to flash the current recovery?
rakeshdas said:
Do I just flash the zip? BTW awesome job keeping our Opt Ones alive! CM10, CWM 6!
Click to expand...
Click to collapse
Yes, its a flashable ZIP
angelgzg said:
This is a zip to flash the current recovery?
Click to expand...
Click to collapse
Yes, flash it
Question here. P509 with NEW baseband would use the p500 recovery? Or P509?
Sent from my LG-P500 using xda app-developers app
Yep, no selection for the P509 build either. Can scroll up and down, but no selection. I know the HW keys were slightly remapped. The power button is supposed to be the select key.
---------- Post added at 08:31 PM ---------- Previous post was at 08:30 PM ----------
ibub said:
Question here. P509 with NEW baseband would use the p500 recovery? Or P509?
Sent from my LG-P500 using xda app-developers app
Click to expand...
Click to collapse
Use the P509 recovery. But wait, can't make any selections.
I could try the p500 recovery, and when I get stuck in fastboot, I could use Android flash recovery to fix it.
Just kidding rashed.
Sent from my LG-P500 using xda app-developers app
Yeah, man, no way to select the option
Ah wait, You guys aren't used to the new key mapping
I've been using this since August
Scroll: Vol up and down or home and back
Up to top: Menu (different from CWM 5)
Select: Search (different from CWM 5)
ibub said:
I could try the p500 recovery, and when I get stuck in fastboot, I could use Android flash recovery to fix it.
Just kidding rashed.
Sent from my LG-P500 using xda app-developers app
Click to expand...
Click to collapse
LOL. In case someone does get stuck however, there is a simple fix.
Extract preferred recovery to the root of your sdcard. Make sure it's named 'recovery.img'.
Open Terminal Emulator
Type "su" without quotes and press Enter. Grant SuperUser request when asked
Type "flash_image recovery sdcard/recovery.img" without quotes and press Enter.
Wait for process to finish. You'll see things happening in terminal emulator
Optionally, type "exit" without quotes and press Enter two times to back out of Terminal Emulator.
You're done.
---------- Post added at 08:58 PM ---------- Previous post was at 08:57 PM ----------
Rashed97 said:
Ah wait, You guys aren't used to the new key mapping
I've been using this since August
Scroll: Vol up and down or home and back
Up to top: Menu (different from CWM 5)
Select: Search (different from CWM 5)
Click to expand...
Click to collapse
Been thru all that. Search doesn't work either. Search and Power are supposed to select the options
bill.weckel said:
LOL. In case someone does get stuck however, there is a simple fix.
Extract preferred recovery to the root of your sdcard. Make sure it's named 'recovery.img'.
Open Terminal Emulator
Type "su" without quotes and press Enter. Grant SuperUser request when asked
Type "flash_image recovery sdcard/recovery.img" without quotes and press Enter.
Wait for process to finish. You'll see things happening in terminal emulator
Optionally, type "exit" without quotes and press Enter two times to back out of Terminal Emulator.
You're done.
Click to expand...
Click to collapse
If you can't boot into rom, that doesn't work...
And the p506 recovery doesn't have a selection button, as stated before by other users...
I guess you'll have to pull the battery, and then boot normally.
Sent from my LG-P500 using xda app-developers app
ibub said:
I guess you'll have to pull the battery, and then boot normally.
Sent from my LG-P500 using xda app-developers app
Click to expand...
Click to collapse
That's exactly what I had to do. And since my device doesn't have fastboot installed on it, I needed the mentioned alternate method to restore my recovery partition, otherwise I would have just used Android Flash Recovery.
Well at least it booted, right?
Sent from my LG-P500 using xda app-developers app
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
:good:
ibub said:
Well at least it booted, right?
Sent from my LG-P500 using xda app-developers app
Click to expand...
Click to collapse
Yes sir
Booting is not a good thing. It is an EXPECTED thing... If something of mine doesn't boot, I'm not a happy camper. So now to fix this weird issue, eh? I think Koush may have played around with it a bit. Bill, can you try this IMG? This is the original P509 one I built from source before I had the CWM builder build it into a "real" CWM
http://jenkins.cyanogenmod.org/job/recovery/16075/artifact/archive/inputrecovery.img
See if that has the same issue
I have fastboot. Bill doesn't. Maybe I should be honorary lab rat.
Sent from my LG-P500 using xda app-developers app
Related
Hi guys,
I managed to port latest CWM v6.0.3.3 & v6.0.3.5 for our device. :victory:
It took me some time to find out how to fix boot loop issues which occurs when we use online CWM Builder. (Thanks to mb-14)
The only new feature I noticed, was "INSTALL ZIP FROM SIDELOAD" which allows us to install ZIPs using ADB commands.
There's no bootloop issues or such, still you should TRY IT AT YOUR OWN RISK.
I also changed the background colour to black for CWM 5 clean look's lovers.
I don't recommend touch version because the font it's too big and I can't change. better use the regular one.
Touch means Touch support.
BlackBG/Dark means Black Background.
No root users, download *.tar.md5 file only.
Root users, download any file *.zip or *.tar.md5
Hope you like it.
And ignore that error "Warning: no file_context found ...."
GT-S7500L / GT-S7500T users, don't flash it.
I might be able to help you porting it to your variants.
Screenshots are attached below
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download link: https://www.dropbox.com/sh/gh7yw46d45kq57n/ZiL6oabHVE
How to flash it using Odin?
Boot into download mode. (hold the following buttons at the same time and in the following order:
HOME + VOLUME DOWN + POWER)
Connect your phone to PC using USB Cable.
Open Odin.
Uncheck anything other than Auto Reboot & F.Reset Time.
Click on PDA button and choose your downloaded *.tar.md5 file. (don't uncheck PDA)
Hit Start.
If you got an error, rename it to *.tar (remove .md5 extention)
Your phone will reboot, to boot into recovery mode. (hold the following buttons at the same time and in the following order:
HOME + VOLUME DOWN + VOLUME UP + POWER)
How to flash it through a custom recovery? (needs root)
Boot into recovery mode.
Choose INSTALL ZIP FROM SD-CARD
Choose any *.zip downloaded attachment.
How to flash it using terminal emulator? (needs root)
Extract recovery.img file to any folder (let's say /sdcard)
Open terminal emulator
Input this code:
Code:
su
dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p12
How to use it?
VOLUME UP/DOWN: scroll up/down
POWER: select
Changes will take effect after a reboot.
Thanks for that seems awesome with Black Background. I wasn't able to flash it through twrp is that normal?
IceGTX said:
Thanks for that seems awesome with Black Background. I wasn't able to flash it through twrp is that normal?
Click to expand...
Click to collapse
No, I flashed both of them using TWRP without any problems 3 hours ago.
Do you get an error message? And what does it say?
Sent from my GT-S7500 using Tapatalk 4 Beta
Bassel Bakr said:
No, I flashed both of them using TWRP without any problems 3 hours ago.
Do you get an error message? And what does it say?
Sent from my GT-S7500 using Tapatalk 4 Beta
Click to expand...
Click to collapse
It said that it failed, tried with sig verifacation and without. only the one with the black backround i tried... In the end i did it from terminal.
Just from curiosity it's possible to make it look like s3?
CWM touch is proprietary
IceGTX said:
It said that it failed, tried with sig verifacation and without. only the one with the black backround i tried... In the end i did it from terminal.
Just from curiosity it's possible to make it look like s3?
Click to expand...
Click to collapse
Yes, it's possible, but touch function won't work unless you have ICS or JB kernel. I will give it a try.
Sent from my GT-S7500 using Tapatalk 4 Beta
no, read my above post. And if I may ask, what makes a kernel "ICS or JB kernel"?
thanks for new recovery
flashing right now!!!
---------- Post added at 10:31 PM ---------- Previous post was at 10:27 PM ----------
flashed it
home button is working as scrolling as we scroll with volume keys and menu key in working as scroll down action
i think home button should be used to enter in particular option
i have to use power button to enter or exit
TheWhisp said:
no, read my above post. And if I may ask, what makes a kernel "ICS or JB kernel"?
Click to expand...
Click to collapse
Check this: http://builder.clockworkmod.com
It's written there that touch recovery will only work on ICS and later kernels.
I already tried to port touch recovery but it looked so much ugly on ace plus, it was like changing LCD density from 160 to 240 !
As I'm not a developer I couldn't fix it, but it works anyway.
Sent from my GT-S7500 using Tapatalk 4 Beta
it's closed source, so we can't fix it for our screens :/
Thread updated with drop box link contains 8 attachments:
4 *.zip and 4 *.tar.md5 (specially for no root users)
Touch version uploaded. (I don't recommend it because the font is too big and I can't change it)
Screenshots uploaded now.
Thanks so much !
Bassel Bakr said:
Thread updated with drop box link contains 8 attachments:
4 *.zip and 4 *.tar.md5 (specially for no root users)
Touch version uploaded. (I don't recommend it because the font is too big and I can't change it)
Screenshots uploaded now.
Click to expand...
Click to collapse
Bassel Bakr thanks so much , I was looking for a CWM 6.0.3.5 Recovery , because TheWhisp told in his thread (on mini 2 CWM 6.0.3.5 recovery) that this recovery is able to backup Faster compared to other CWM Recoveries . Thanks so much :laugh: .Enjoying it really much :good:
Firstly installed that touch recovery BlackBG , but it looked weird , then I installed the CWM 6.3.3 without touch , through Terminal Emulator .
installed fine but when try to install cm10.1 it gives error!!!
ManzzaShahi said:
installed fine but when try to install cm10.1 it gives error!!!
Click to expand...
Click to collapse
What does it say?
blinqipa said:
Bassel Bakr thanks so much , I was looking for a CWM 6.3.3 Recovery , because TheWhisp told in his thread (on mini 2 CWM 6.3.3 recovery) that this recovery is able to backup Faster compared to other CWM Recoveries . Thanks so much :laugh: .Enjoying it really much :good:
Firstly installed that touch recovery BlackBG , but it looked weird , then I installed the CWM 6.3.3 without touch , through Terminal Emulator .
Click to expand...
Click to collapse
I thought that if I uploaded touch version, someone could make it works as it should be. (still waiting)
By the way, did you try to flash any of the ZIPs and got an error that made use terminal method?
Bassel Bakr said:
What does it say?
Click to expand...
Click to collapse
it gives error status 7
and i guess it corrupts file as well
i tried flashing this recovery and both time it gave same error
also i mount sdcard and copied cm10.1 again and tried but same issue
and i flashed old recovery back
ManzzaShahi said:
it gives error status 7
and i guess it corrupts file as well
i tried flashing this recovery and both time it gave same error
also i mount sdcard and copied cm10.1 again and tried but same issue
and i flashed old recovery back
Click to expand...
Click to collapse
Solution is here: Click ME
Bassel Bakr said:
Solution is here: Click ME
Click to expand...
Click to collapse
ya i know about that error
but this problem is not in other recovery and twrp as well
ManzzaShahi said:
ya i know about that error
but this problem is not in other recovery and twrp as well
Click to expand...
Click to collapse
This error is because of the updater-script not the recovery itself, other recoveries ignore asserts checks (I guess).
can you post some images of touch version? If it's really resolution problem maybe we can contact Koush about it.
Unlocking, rooting, relocking and unrooting simplified! (and much more!)
VERSION 2.1.4 - This program will automatically bring together all the files you need to unlock and root your device in a few clicks, or flash it back to stock and re-lock it. You can also use this program to backup/restore all your important data, flash zips, set file permissions, push and pull files, install apps, generate logcats/bugreports, and much more! With the included file association options, you can perform tasks like flashing zips, installing apps, restoring android backup files, and flashing/booting img files with just a double click! The program includes a full featured interface for automating tasks in TWRP, enhanced restore features, an in-built auto-updater/notification system, ‘any build’ mode, advanced restore features,’NRT- Live Log’ for viewing the adb/fastboot cmds that are run in the background, quick tools utilities, and tools for taking screenshots/screen-recordings. All the latest official Android builds and Nexus devices are supported. The program intelligently and selectively downloads the files it needs for your device and makes sure you are using the latest files available. The program can even auto-detect your device and build. This release brings full Marshmallow root support plus all automated features by utilizing a new system that no longer requires modified boot.imgs. Check out the updated changelog for a more comprehensive breakdown of the feature set and changes in this release.
~ my goal for this project is make the entire process as smooth and simple as possible ~
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Please read the FAQs before posting questions: http://www.wugfresh.com/nrt/faqs/
Looking for a walk-through? >> Excellent Instructional/How-To Videos: http://www.wugfresh.com/videos/
More information & Download Links: http://www.wugfresh.com/nrt/
Changelog: http://www.wugfresh.com/nrt/changelog/
Enjoy! ^_^
{{ WugFresh }}
I can't find 1.6.6 it still says "Version 1.6.6 coming soon, ETA = 07.28.2013"
Thanks.
ashik992 said:
I can't find 1.6.6 it still says "Version 1.6.6 coming soon, ETA = 07.28.2013"
Thanks.
Click to expand...
Click to collapse
Maybe try clearing browser cache. Here are some external mirrors:
Mediafire: [redacted]
Dev-host: [redacted]
Enjoy! ^_^
{{ WugFresh }}
Thx Wug! I was wondering if you were going to update the toolkit to work with flo, and BAM! Here it is! Love your work, hope you keep at it. :good:
I did not chose twrp
I use 1.66 to root my nexus 7 (2012) and I did not check the (also flash custom recovery) first pass was pushing temporary twrp, and second it flash the twrp.
Why? I get a real problem with twrp with the 4.3 update, so I did not want it in my device.
Is this a bug in the toolkit? or there is a reason why the twrp is push without asking to flash?
Still the best toolkit I ever use.
You may want to change the main body font. It's almost impossible to read on the xda app with the dark theme selected
prshosting.org
Thanks for your work. I first ran and used the "raw driver" install. Went to step 3 and ran the "check". "Success"! When installing Root & Recovery, it gets to the point where it says pushing root files to device, but when it's supposed to boot into TWRP, it boots into system "android man with red exclamation mark on his belly" mode. Tried it twice with the same result. Any ideas? I did notice that in Device Mgr "portable devices" isn't showing at all. However in Prompt mode, an "adb devices" shows device serial #. It's as if TWRP wasn't flashed correctly.
melfunn said:
Thanks for your work. I first ran and used the "raw driver" install. Went to step 3 and ran the "check". "Success"! When installing Root & Recovery, it gets to the point where it says pushing root files to device, but when it's supposed to boot into TWRP, it boots into system "android man with red exclamation mark on his belly" mode. Tried it twice with the same result. Any ideas? I did notice that in Device Mgr "portable devices" isn't showing at all. However in Prompt mode, an "adb devices" shows device serial #. It's as if TWRP wasn't flashed correctly.
Click to expand...
Click to collapse
Same issue I'm having.
Thanks for the app! Unlocking went fine, I'm hesitant to root if it's going to leave me with TWRP even if I leave that field unchecked, anyone else have the same problem as Lachaine? Or has anyone successfully gained root and maintained stock recovery with this?
funkbucket007 said:
Same issue I'm having.
Click to expand...
Click to collapse
Please try enabling this option:
Cheers.
{{ WugFresh }}
Thanks for all your hard work on this, and for sharing it with the community!! It's great having multiple options!!! I didn't use this, but just wanted to say thanks for building this and freely sharing it!!!! It's devs like you that make XDA such a great community to be a part of!!!
SwiftKey'ed from my White Sprint Note 2 using XDA Premium
WugFresh said:
Please try enabling this option:
Cheers.
{{ WugFresh }}
Click to expand...
Click to collapse
Check that option and start over with the root process?
I'm having the same problem. Made the changes in setting and no difference.
jsnietka said:
I'm having the same problem. Made the changes in setting and no difference.
Click to expand...
Click to collapse
Same here.
Sent from my SAMSUNG-SGH-I317 using xda premium
---------- Post added at 02:50 PM ---------- Previous post was at 01:53 PM ----------
k5mitch said:
Same here.
Sent from my SAMSUNG-SGH-I317 using xda premium
Click to expand...
Click to collapse
jsnietka said:
I'm having the same problem. Made the changes in setting and no difference.
Click to expand...
Click to collapse
Third time is a charm.:good:
k5mitch said:
Same here.
Sent from my SAMSUNG-SGH-I317 using xda premium
---------- Post added at 02:50 PM ---------- Previous post was at 01:53 PM ----------
Third time is a charm.:good:
Click to expand...
Click to collapse
Are you saying it finally worked?
I've done it twice same lil dead android with the red triangle.
Guess I'll try again
Unlocked, rooted and installed TWRP. No problems.
Thanks!
feron said:
Are you saying it finally worked?
I've done it twice same lil dead android with the red triangle.
Guess I'll try again
Click to expand...
Click to collapse
ODD.. third time it worked... lol
feron said:
ODD.. third time it worked... lol
Click to expand...
Click to collapse
Well after I checked the option wug suggested I closed the program and re-started it. Walah it worked.
Sent from my SAMSUNG-SGH-I317 using xda premium
k5mitch said:
Well after I checked the option wug suggested I closed the program and re-started it. Walah it worked.
Sent from my SAMSUNG-SGH-I317 using xda premium
Click to expand...
Click to collapse
Yes don't forget to restart the toolkit before trying again. Worked for me when I did. Thanks wug!
Having an issue. Stock build# is JWR66N but is not listed, so i choose the closest one, JWR66V. So far it installed the adb drivers but fails on the Full Driver Test and Checking ADB Status. The device shows up perfectly now in DM, as a Nexus7, so the drivers have a clean install. Rebooted 2-3 times already. I can go to the adb command line and its installed but not sure why the app or PC doesn't see it setup right? I cant continue to the next steps if adb is not right...lol
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Disclaimer:
By flashing this recovery you take full responsibility to whatever happens on your device. The developer will NOT be held responsible to whatever happens on your device. Ofcourse, the recovery has been tested but whatever happens on your device will not be held against the developer.
What Is CWM Recovery ?
CWM recovery is a way that enables you to falsh a custom rom , customize your rom and can save you from bad situations. To Be fully in controll of your android device you need a recovery and this is one of them.How To Install CWM Recovery ?
There are 2 methods for installing CWM
1.Method (dd method)
You need root before you continue.
now copy recovery.img from second post to your sd card and :
1.On PC :
Make shure that device is on usb debugging mode.
Plug device and open Terminal/command prompt.
Copy Pasta the Following Commands :
PHP:
adb shell
dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p10
make shure that partion is mmcblk0p10 or you will brick device !
now you can reboot to recovery (volume up + home +power) and enjoy CWM 6.0.X.X
2.On Phone :
First Download Terminal Emulator From Play Store.
Plug device and open Terminal apk
Right the Following Commands :
PHP:
su (you need root acess for it )
Then
dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p10
make shure that partion is mmcblk0p10 or you will brick device !(guys with fat fingers stay away !)
now you can reboot to recovery (volume up + home +power) and enjoy CWM 6.0.X.X
Second Method Is Via ODIN.
First Download ODIN
Now Download the GT-I9500-CWM-6.0.X.X.tar From Second Post and put it in same directory as odin.
Go To Download Mod (Volume Down +Home+Power) and plug device.
Now in Odin You Will see {added} and a light blue figure on top that means that device has been recognized if you dont get them uninstall devices drivers and retry.
Now click PDA and select GT-I9500-CWM-6.0.X.X.tar And Then Click Start .
After Device reboots Your Done and CWM Is Flashed.
Third method is flashing via recovery .
It does not matter if you are on stock recovery or custom recovery .
First of all download from second post GT-I9500-CWM-6.0.X.X.zip .
Then put it on sdcard .
Then Flash it .
Enjoy your new recovery.Thanks To :
CM Team For CWM recovery .
@Dees_Troy @bigbiff @anders3408 @cybojenix {These Guys Are The Best And I Thank Them for helping me every step in the way and nut thinking that i am a nut job }
Please Hit The Thanks Button If You Like My Work
Follow Me On Twitter SamerDKingCobra
If You Have Any Kind Of Trouble Feel Free To PM Me As I Am Here Almost 19 Hours A Day.
Downloads :
1.GT-I9500-CWM-6.0.4.6.img {For dd Method , Please rename to recovery.img }
2.GT-I9500-CWM-6.0.4.6.tar Build #1 {For Odin}
1.GT-I9500-CWM-6.0.4.5.img {For dd Method , Please rename to recovery.img }
2.GT-I9500-CWM-6.0.4.5.tar Build #1 {For Odin}
3.GT-I9500-CWM-6.0.4.5.zip [For Third Method]
1.GT-I9500-CWM-6.0.4.4.img {For dd Method , Please rename to recovery.img }
2.GT-I9500-CWM-6.0.4.4.tar Build #1 {For Odin}
3.GT-I9500-CWM-6.0.4.4.zip {For third method}
Change Log :
Build #1 Fully Working.Whats To Do In Future Build ?
Enable Touch .
Add OTG Support.FAQ:{Please Read Before Posting}
Q: OMG ! Recovey Not Booting What To Do ?
Alease Dont try entering recovery first time from advanced power menu just do it the hard way
Q:My Device is not getting read by windows ?
A:Uninstall all drivers that you installed for the device .Please Hit The Thanks Button If You Like My Work
Follow Me On Twitter SamerDKingCobra
If You Have Any Kind Of Trouble Feel Free To PM Me As I Am Here Almost 19 Hours A Day.
For later use
Attachment.??
Disturbed™ said:
Attachment.??
Click to expand...
Click to collapse
Second post , sorry i took me long enough because of my bad internet
S.a.M.e.R_d said:
Second post , sorry i took me long enough because of my bad internet
Click to expand...
Click to collapse
Thanks buddy. can you please tell one thing.? what is the speed of taking /restoring backup.? like how much time does it take to take backup.? in TWRP V it hardly take 3-5 min for 2.5GB data.
Disturbed™ said:
Thanks buddy. can you please tell one thing.? what is the speed of taking /restoring backup.? like how much time does it take to take backup.? in TWRP V it hardly take 3-5 min for 2.5GB data.
Click to expand...
Click to collapse
after a precision timing it took me 7. 43 minutes for 5.23 gb of data
Works well, thanks.
will this work on leak 4.3 tq
kishen80 said:
will this work on leak 4.3 tq
Click to expand...
Click to collapse
Yes probably , as i compiled CWM with android 4.3.1 source
Sent from my GT-I9500 using XDA Premium 4 mobile app
kishen80 said:
will this work on leak 4.3 tq
Click to expand...
Click to collapse
After doing wipe data/factpry reset on latest philz touch recovery the phone wont go past the samsung logo..
Something like that wont happen with tbis right?
Sent from my GT-I9500 using xda app-developers app
Degrated Shadow said:
After doing wipe data/factpry reset on latest philz touch recovery the phone wont go past the samsung logo..
Something like that wont happen with tbis right?
Sent from my GT-I9500 using xda app-developers app
Click to expand...
Click to collapse
no its working :good::good::good:
kishen80 said:
no its working :good::good::good:
Click to expand...
Click to collapse
yes i can confirm. i just did a backup and restore. its freaking good. i am sticking to this recovery.
subscribing now.
Hi,
Please make ZIP version to istall from other recovery
Thanks
Do we have a CWM flashable package?
i made a zip but it will not work from first flashh dunno why , i will try and report back.
mateen5997 said:
Hi,
Please make ZIP version to istall from other recovery
Thanks
Click to expand...
Click to collapse
rl421403 said:
Do we have a CWM flashable package?
Click to expand...
Click to collapse
Done Check Second Post.
S.a.M.e.R_d said:
Done Check Second Post.
Click to expand...
Click to collapse
Thanks. Just grabbed.
Sent from my Galaxy S4
S.a.M.e.R_d said:
Done Check Second Post.
Click to expand...
Click to collapse
Thanks
Hi Samered, cwm file zip is corrupted, please make another one, thanks
Sent from my GT-I9500 using XDA Premium 4 mobile app
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclamer
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
WARNING: The stock boot image has dm-verity, which prevents you from booting if you swipe to enable system modifications!
SOLUTION: Flash a root such as SuperSU or phh-superuser. You can also flash no-verity-opt-encrypt.zip.
Supported Models :
MS550/K550
Prerequisites :
YOUR BOOTLOADER MUST BE UNLOCKED
How to unlock the bootloader :
1-enable oem unlock in the developer settings
2-reboot to fastboot [adb reboot bootloader] then issue this command [fastboot oem unlock]
note: this will wipe your data]
Click to expand...
Click to collapse
-If you have problems with the device drivers installed , you will need to install lg bridge, you can download it from here:
http://tool.lime.gdms.lge.com/dn/downloader.dev?fileKey=PWZO7A26B9UW
How to flash Twrp:
BOOT INTO FASTBOOT MODE:
With your phone off, connect your usb cable to your phone while holding VOLUME DOWN to boot into fastboot mode or just type [adb reboot bootloader] in the adb terminal
ONCE YOU ARE IN FASTBOOT MODE:
Open a command prompt and type "fastboot flash recovery <path_to_recovery.img>” without the quotation marks.
Example: fastboot flash recovery C:/Users/John/Desktop/recovery.img
[don't forget to extract the downloaded recovery zip to get the recovery.img]
WHEN THE FLASH COMPLETES: (Takes about 2 seconds)
On your phone, unplug the usb cable and power it off by taking out the battery and putting it back in.
BOOT INTO RECOVERY MODE FOR THE FIRST TIME
HOLD VOLUME DOWN + POWER until you see the LG logo and then temporarily release the POWER button, immediately pressing and holding it back down until you see the white prompt [factory reset] screen. You will NEVER release the volume down button in this process!
Use the hard keys to select "YES" and then "YES" again to boot into TWRP
How to Disable encryption and flash super su [Install Root]:
1. In TWRP, go to Wipe > Format Data. Enter the keyword ‘yes‘, in the provided space and enter. This will wipe the automatically encrypted filesystem, and decrypt it.
2. Once the wiping is done, reboot back into recovery. Go to Reboot > Recovery.
3. When the recovery boots again, connect your phone to the PC and Enable MTP under the Mount section.
4. Transfer the downloaded ‘no-verity-opt-encrypt-**.zip’ and ‘SR1-SuperSU-v2.78-SR1-20160915123031.zip to your internal storage or EXTSD
5. Disconnect the device now.
6. Tap on Install. Now, navigate your phone’s storage and select ‘no-verity-opt-encrypt-**.zip’. Finally swipe the ‘Swipe to confirm Flash’ button on the bottom of the screen.
7. The flashing process will merely take a few seconds. And when it’s done, follow the same method to flash the root package – SR1-SuperSU-v2.78-SR1-20160915123031.zip [/B]
Wait 1 or 2 minutes after the zip files are done flashing then reboot system and PROFIT! Your phone may take 3-5 minutes to boot the first time and it might boot-loop once or twice at the Metro PCS splash screen but don’t worry this is expected.
Click to expand...
Click to collapse
Downloads :
Twrp 3.1.1
https://twrp.me/lg/lgstylo2plus.html
Additional Downloads :
SuperSU stable by Chainfire
dm-verity and force encryption disabler
Notice: After the TWRP splash screen you will see the option to type in the password to decrypt the filesystem just ignore it and press the cancel button.
Credits :
TeamWin, My Testers @!Led*Eyes! @Djoec1983, My family
Device Tree:
https://github.com/TeamWin/android_device_lge_ph2n
Please hit the thanks button and conider to donate if you enjoy my work :highfive:
Paypal donation link: https://paypal.me/messi2050
Awesome! Job! Can this only be done with a windows computer?
Sent from my LG-K550 using XDA-Developers mobile app
Please add that wiping data removes everything
Sent from my LGMS550 using Tapatalk
hippiesky said:
Awesome! Job! Can this only be done with a windows computer?
Sent from my LG-K550 using XDA-Developers mobile app
Click to expand...
Click to collapse
Ty , a linux system should work too
Does this only work on metroPCS varients? I have a lg stylus 2 plus k557 which is non metro pcs.
g17123 said:
Does this only work on metroPCS varients? I have a lg stylus 2 plus k557 which is non metro pcs.
Click to expand...
Click to collapse
It should work on any stylo 2 plus with this cpu (Qualcomm MSM8937 Snapdragon 43)
lmcdaniel215 said:
Please add that wiping data removes everything
Click to expand...
Click to collapse
I guess I thought the phrase said it all but I'm sure there will be someone who doesn't read the bootloader unlocking thread and isn't aware that formatting /data will format your data
Hahah some people will not understand thats why i said it
Sent from my LGMS550 using Tapatalk
hippiesky said:
Awesome! Job! Can this only be done with a windows computer?
Sent from my LG-K550 using XDA-Developers mobile app
Click to expand...
Click to collapse
I can verify that this will work fine in Linux.
Djoec1983 said:
I can verify that this will work fine in Linux.
Click to expand...
Click to collapse
Can you unlock the bootloader with linux? Been searchinh everywhere and cant seem to figure it out
Sent from my LG-D801 using XDA-Developers mobile app
hippiesky said:
Can you unlock the bootloader with linux? Been searchinh everywhere and cant seem to figure it out
Sent from my LG-D801 using XDA-Developers mobile app
Click to expand...
Click to collapse
Should be able to just open terminal and try it
Sent from my LGMS550 using Tapatalk
lmcdaniel215 said:
Should be able to just open terminal and try it
Sent from my LGMS550 using Tapatalk
Click to expand...
Click to collapse
What are the commands though
Sent from my LG-D801 using XDA-Developers mobile app
hippiesky said:
What are the commands though
Sent from my LG-D801 using XDA-Developers mobile app
Click to expand...
Click to collapse
Start with abd devices with the phone plugged in and on. To see if you have the proper files
Sent from my LGMS550 using Tapatalk
---------- Post added at 09:22 AM ---------- Previous post was at 09:19 AM ----------
hippiesky said:
What are the commands though
Sent from my LG-D801 using XDA-Developers mobile app
Click to expand...
Click to collapse
Here read this http://forum.xda-developers.com/showthread.php?t=2277112
Sent from my LGMS550 using Tapatalk
In Linux try the command sudo fastboot oem unlock, it will ask you to enter your password enter it and you should be all set.
Sent from my LGMS550 using Tapatalk
Djoec1983 said:
In Linux try the command sudo fastboot oem unlock, it will ask you to enter your password enter it and you should be all set.
Sent from my LGMS550 using Tapatalk
Click to expand...
Click to collapse
Do i have to be in recovery mode? You know vol down and power?
Sent from my LG-D801 using XDA-Developers mobile app
No you need to be in fastboot. Power off your device and press volume down, while continuing to hold volume down plug in your USB cable. You should now be in fastboot. Open up a command prompt and try the command I mentioned above.
Djoec1983 said:
No you need to be in fastboot. Power off your device and press volume down, while continuing to hold volume down plug in your USB cable. You should now be in fastboot. Open up a command prompt and try the command I mentioned above.
Click to expand...
Click to collapse
Grrrrr cant figure out password lol thanks for the help
Sent from my LG-D801 using XDA-Developers mobile app
Should just be the password to your account.
Djoec1983 said:
Should just be the password to your account.
Click to expand...
Click to collapse
The same password you created your account with.
Lol work computer have no idea .
Sent from my LG-K550 using XDA-Developers mobile app
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclamer
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
WARNING: The stock boot image has dm-verity, which prevents you from booting if you swipe to enable system modifications!
SOLUTION: Flash a root such as SuperSU or phh-superuser. You can also flash no-verity-opt-encrypt.zip.
Supported Models :
TP450 & MP450 & LGM470
Prerequisites :
YOUR BOOTLOADER MUST BE UNLOCKED
How to unlock the bootloader :
1-enable oem unlock in the developer settings
2-reboot to fastboot [adb reboot bootloader] then issue this command [fastboot oem unlock]
note: this will wipe your data]
Click to expand...
Click to collapse
-If you have problems with the device drivers installed , you will need to install lg bridge, you can download it from here:
http://tool.lime.gdms.lge.com/dn/downloader.dev?fileKey=PWZO7A26B9UW
How to flash Twrp:
BOOT INTO FASTBOOT MODE:
With your phone off, connect your usb cable to your phone while holding VOLUME DOWN to boot into fastboot mode or just type [adb reboot bootloader] in the adb terminal
ONCE YOU ARE IN FASTBOOT MODE:
Open a command prompt and type "fastboot flash recovery <path_to_recovery.img>” without the quotation marks.
Example: fastboot flash recovery C:/Users/John/Desktop/recovery.img
[don't forget to extract the downloaded recovery zip to get the recovery.img]
WHEN THE FLASH COMPLETES: (Takes about 2 seconds)
On your phone, unplug the usb cable and power it off by taking out the battery and putting it back in.
BOOT INTO RECOVERY MODE FOR THE FIRST TIME
HOLD VOLUME DOWN + POWER until you see the LG logo and then temporarily release the POWER button, immediately pressing and holding it back down until you see the white prompt [factory reset] screen. You will NEVER release the volume down button in this process!
Use the hard keys to select "YES" and then "YES" again to boot into TWRP
Notice: After the TWRP splash screen you will see the option to type in the password to decrypt the filesystem just ignore it and press the cancel button.
Click to expand...
Click to collapse
How to Disable encryption and flash super su [Root Your Device]:
1. In TWRP, go to Wipe > Format Data. Enter the keyword ‘yes‘, in the provided space and enter. This will wipe the automatically encrypted filesystem, and decrypt it.
2. Once the wiping is done, reboot back into recovery. Go to Reboot > Recovery.
3. When the recovery boots again, connect your phone to the PC and Enable MTP under the Mount section.
4. Transfer the downloaded ‘no-verity-opt-encrypt-**.zip’ and ‘SR1-SuperSU-v2.78-SR1-20160915123031.zip to your internal storage or EXTSD
5. Disconnect the device now.
6. Tap on Install. Now, navigate your phone’s storage and select ‘no-verity-opt-encrypt-**.zip’. Finally swipe the ‘Swipe to confirm Flash’ button on the bottom of the screen.
7. The flashing process will merely take a few seconds. And when it’s done, follow the same method to flash the root package – SR1-SuperSU-v2.78-SR1-20160915123031.zip [/B]
Wait 1 or 2 minutes after the zip files are done flashing then reboot system and PROFIT! Your phone may take 3-5 minutes to boot the first time and it might boot-loop once or twice at the Metro PCS splash screen but don’t worry this is expected.
Click to expand...
Click to collapse
Downloads:
https://twrp.me/lg/lgstylo3plus.html
Additional Downloads:
SuperSU stable by Chainfire
dm-verity and force encryption disabler
[Please do not mirror the downloads]
Credits: Me, Teamwin, my tester @ghet2rockuu
Device Tree:
https://github.com/TeamWin/android_device_lge_sf340n
Please note I don't own this device, lg didn't release the stock firmware yet, spend a lot of my time bringing these builds for you to use and benefit from. make sure to hit the thanks button and consider to donate if you appreciate my work
Paypal donation link: https://paypal.me/messi2050
evrything working good thanks alot
ghet2rockuu said:
evrything working good thanks alot
Click to expand...
Click to collapse
Yw, thanks for testing
everything working thanks for this!
cant change themixer file when i save keeps saying file read only n wont let me save weird because it use to work on es file explorer
nvrmnd fixed it by changing permissions
---------- Post added at 06:49 PM ---------- Previous post was at 06:23 PM ----------
how can i get a original boot image i need it to install latest magisk i have itinstalled but its asking to update and i cant with out original boot image
ghet2rockuu said:
cant change themixer file when i save keeps saying file read only n wont let me save weird because it use to work on es file explorer
nvrmnd fixed it by changing permissions
---------- Post added at 06:49 PM ---------- Previous post was at 06:23 PM ----------
how can i get a original boot image i need it to install latest magisk i have itinstalled but its asking to update and i cant with out original boot image
Click to expand...
Click to collapse
You better have a backup before tying any mod as there is no available stock firmware for download it will be very difficult to fix a brick without a backup
messi2050 said:
You better have a backup before tying any mod as there is no available stock firmware for download it will be very difficult to fix a brick without a backup
Click to expand...
Click to collapse
i thnk it can be repaired with lg back up . but i got evrythng working , just magisk cant update , says need original boot image
ghet2rockuu said:
i thnk it can be repaired with lg back up . but i got evrythng working , just magisk cant update , says need original boot image
Click to expand...
Click to collapse
No unfortunately stock rom is not available in lg bridge yet.
download link fixed
Which version do I need?? dm-verity and force encryption disabler
SoonersChuck said:
Which version do I need?? dm-verity and force encryption disabler
Click to expand...
Click to collapse
Last version should work.
I'm having a hard time trying to get to thw TWRP screen! :/
This is all I get:
"your device software cannot be checked for corruption. Lock the bootloader"
---------- Post added at 02:10 AM ---------- Previous post was at 02:07 AM ----------
70p487 said:
i'm having a hard time trying to get to thw twrp screen! :/
this is all i get:
"your device software cannot be checked for corruption. Lock the bootloader"
Click to expand...
Click to collapse
edit: Wait! I got it! Lol!
Messi! You are a true hero!!!! Thank you soooo much! <3
Yo guys! Finally!!! I'm attempting this! I have the T-Mobile variant, should b ok?
Sent from my LG-TP450 using XDA-Developers Legacy app
zounduser said:
Yo guys! Finally!!! I'm attempting this! I have the T-Mobile variant, should b ok?
Sent from my LG-TP450 using XDA-Developers Legacy app
Click to expand...
Click to collapse
Yea go ahead
Hell ya. What you guys think of this phone? I'm loving mine! I came from the Note 4, and this phone is way faster, with lower specs. But ya I'm really liking this phone. Can't wait to get home and get root and recovery on this bad boy! Thank you!
Sent from my LG-TP450 using XDA-Developers Legacy app
Best Believe It...
zounduser said:
Hell ya. What you guys think of this phone? I'm loving mine! I came from the Note 4, and this phone is way faster, with lower specs..
Click to expand...
Click to collapse
Thanks to a *Demi-God* named Messi... I'm kicking the front door open in about 8 hours and DEMANDING they sell me a LG Stylo 3+..
They go on sale for $149.00 starting @ store opening.. :good:
Talk about Karma.. GREAT timing Messi !
so i dont swipe to allow modifications? in TWRP? im in TWRP on that screen. do i keep it read only???
zounduser said:
so i dont swipe to allow modifications? in TWRP? im in TWRP on that screen. do i keep it read only???
Click to expand...
Click to collapse
I thought if u didn't...then u don't have root...I'm finally able to sit and concentrate on this...failed attempt yesterday was because I was in a hurry
SoonersChuck said:
I thought if u didn't...then u don't have root...I'm finally able to sit and concentrate on this...failed attempt yesterday was because I was in a hurry
Click to expand...
Click to collapse
No I kept it read only and everything went perfect
A simple way to show you appreciate development is to hit that thanks button on the first post, so make sure to hit it as a simple way to show continued support!