Database Info

Best ROM to flash?

Hi I'm new to the Xoom and haven't gotten it rooted or unlocked yet (been trying no luck) but for when I do what ROM would you suggest me to install? Thanks in advanced
Sent from my SAMSUNG-SGH-I997 using xda premium

get rooted or get booted
deathblade said:
Hi I'm new to the Xoom and haven't gotten it rooted or unlocked yet (been trying no luck) but for when I do what ROM would you suggest me to install? Thanks in advanced
Sent from my SAMSUNG-SGH-I997 using xda premium
Click to expand...
Click to collapse
hello, and welcome. i suggest using this rom. its ICS and it's AWESOME!!!!! as for rooting. someone else can walk you through it. once you set up all the files (fastboot&adb) you'll be good to go with a few simple terminal commands.
here's a link to the team Eos ICS rom:http://forum.xda-developers.com/show....php?t=1426838
ENJOY

m!kelcz said:
hello, and welcome. i suggest using this rom. its ICS and it's AWESOME!!!!! as for rooting. someone else can walk you through it. once you set up all the files (fastboot&adb) you'll be good to go with a few simple terminal commands.
here's a link to the team Eos ICS rom:http://forum.xda-developers.com/show....php?t=1426838
ENJOY
Click to expand...
Click to collapse
Thank you, for the suggestion, and on the note of rooting, I've tried the command and I get stuck at the boot loader screen with nothing doing any thing, the computer says waiting on device and the Xoom just sis there at the dual core boot and the words starting fast boot services at the top left hand corner, and it doesn't do anything, I've tried this on two different computers, one using Ubuntu the other win 7 ultimate both do the same thing
Sent from my SAMSUNG-SGH-I997 using xda premium

Also link is down..
Sent from my SAMSUNG-SGH-I997 using xda premium

deathblade said:
Thank you, for the suggestion, and on the note of rooting, I've tried the command and I get stuck at the boot loader screen with nothing doing any thing, the computer says waiting on device and the Xoom just sis there at the dual core boot and the words starting fast boot services at the top left hand corner, and it doesn't do anything, I've tried this on two different computers, one using Ubuntu the other win 7 ultimate both do the same thing
Sent from my SAMSUNG-SGH-I997 using xda premium
Click to expand...
Click to collapse
make sure you have your adb & fastboot installed to C:/ and no sub folder (this makes sure everything is clean and no interferences). after that you must hard reset your xoom (hold in power button and vol up) than press vol up to access fastboot. after this navigate to your android SDK install directory and hold in left ctrl button and right click on the working folder and hit open cmd here.
also did you try the command fastboot devices? this lists the devices connected to your computer aka your xoom
here's a list of command just in case
Commands:
adb - Android Debug Bridge - One of the two things you'll need to know if you ever want to do anything non-conventional on your android based phone.
List of commands that can be used by adb can be prompted by typing adb at the system shell (command prompt or terminal)
Notable adb commands:
adb devices - If you don't know anything, this is the ONE thing you have to know.
adb devices will give you a list of devices connected to the computer. This is also a good way to make sure that your phone is actually connected to the computer.
adb reboot (bootloader|recovery)
adb reboot - this will reboot your phone normally.
adb reboot bootloader - this will reboot your phone back into the bootloader (white screen with the android on wheels)
adb reboot recovery - this will reboot your phone back into recovery console (either default or amon_ra's recovery).
adb shell - this will shell into the phone and you can now explore the phone. Remember phone's native backend os is linux so know your linux commands.
adb remount - remounts the system partition on the phone so you can you read/write to it.
adb push xxx yyy - will push xxx file from computer into yyy location/file on phone (needs rooted access)
adb pull xxx yyy - will pull xxx file from phone into yyy location/file on computer (needs rooted access)
Fastboot is protocol used to update the flash filesystem in Android devices from a host over USB. It allows flashing of unsigned partition images.
Notable fastboot commands:
fastboot devices - If you don't know anything, this is the ONE thing you have to know.
fastboot devices will give you a list of devices connected to the computer. This is also a good way to make sure that your phone is actually connected to the computer.
fastboot reboot - this will reboot your phone normally
fastboot oem unlock - this will unlock your bootloader - NOTE THIS WILL VOID YOUR NEXUS ONE WARRANTY
fastboot erase XXX - Will erase the partition XXX (such as userdata, cache) - mainly used for resetting phone and clearing userdata / factory settings.
fastboot flash XXX YYY - This will flash XXX partitionn with YYY image.
e.g: fastboot flash system system_update.img will flash/update your system partition with an image called system_update
---------- Post added at 02:01 PM ---------- Previous post was at 01:56 PM ----------
also here's a link to the official team Eos rom. this is the best rom by far out right now. loving it. my xoom runs so much faster than HC.
http://forum.xda-developers.com/showthread.php?t=1484770
---------- Post added at 02:02 PM ---------- Previous post was at 02:01 PM ----------
hi sorry.. had to get to ten posts XD

This is exactly what I did, I used adb to put in fast boot mode and used the command to try and unlock it, tried with files in c drive and in user profile, all just kinda sit there and say waiting on device, though about how long should I wait for it to unlock boot loader? And what will happen once it does, also I'm running Android v 4.0.3
Sent from my SAMSUNG-SGH-I997 using xda premium

IM stuck at this screen on the Xoom
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And here on my computer
Sent from my SAMSUNG-SGH-I997 using xda premium

Try a different USB cable? I had the same problem and changed the cable, problem solved.

I did and I even used two different computers with two different oses
Sent from my SAMSUNG-SGH-I997 using xda premium

[RECOVERY]CWM 6.0.2.7 for LG Optimus One Family

ClockworkMod Recovery 6.0.2.7 for LG MSM7x27 Devices (P500, P505, P506, and P509)
ClockworkMod Recovery 6.0.2.7 is here for the LG Optimus One Family!!
Basically I wanted a new version of CWM for my P506 and I decided I'd make it public
cyanogen said:
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
New Key Mapping
Scroll: Vol up and down or home and back
Up to top of list: Menu (different from CWM 5)
Select: Search (different from CWM 5)
Downloads:
The links here are the latest and most stable builds.
Latest Builds:
LInks withheld due to major errors.
Click to expand...
Click to collapse

The search key in P500 doesn´t work. i can´t doing nothing :crying:
And now?

marcomarinho9 said:
The search key in P500 doesn´t work. i can´t doing nothing :crying:
And now?
Click to expand...
Click to collapse
Weird... Let me try it here.

Do I just flash the zip? BTW awesome job keeping our Opt Ones alive! CM10, CWM 6!

This is a zip to flash the current recovery?

rakeshdas said:
Do I just flash the zip? BTW awesome job keeping our Opt Ones alive! CM10, CWM 6!
Click to expand...
Click to collapse
Yes, its a flashable ZIP
angelgzg said:
This is a zip to flash the current recovery?
Click to expand...
Click to collapse
Yes, flash it

Question here. P509 with NEW baseband would use the p500 recovery? Or P509?
Sent from my LG-P500 using xda app-developers app

Yep, no selection for the P509 build either. Can scroll up and down, but no selection. I know the HW keys were slightly remapped. The power button is supposed to be the select key.
---------- Post added at 08:31 PM ---------- Previous post was at 08:30 PM ----------
ibub said:
Question here. P509 with NEW baseband would use the p500 recovery? Or P509?
Sent from my LG-P500 using xda app-developers app
Click to expand...
Click to collapse
Use the P509 recovery. But wait, can't make any selections.

I could try the p500 recovery, and when I get stuck in fastboot, I could use Android flash recovery to fix it.
Just kidding rashed.
Sent from my LG-P500 using xda app-developers app

Yeah, man, no way to select the option

Ah wait, You guys aren't used to the new key mapping
I've been using this since August
Scroll: Vol up and down or home and back
Up to top: Menu (different from CWM 5)
Select: Search (different from CWM 5)

ibub said:
I could try the p500 recovery, and when I get stuck in fastboot, I could use Android flash recovery to fix it.
Just kidding rashed.
Sent from my LG-P500 using xda app-developers app
Click to expand...
Click to collapse
LOL. In case someone does get stuck however, there is a simple fix.
Extract preferred recovery to the root of your sdcard. Make sure it's named 'recovery.img'.
Open Terminal Emulator
Type "su" without quotes and press Enter. Grant SuperUser request when asked
Type "flash_image recovery sdcard/recovery.img" without quotes and press Enter.
Wait for process to finish. You'll see things happening in terminal emulator
Optionally, type "exit" without quotes and press Enter two times to back out of Terminal Emulator.
You're done.
---------- Post added at 08:58 PM ---------- Previous post was at 08:57 PM ----------
Rashed97 said:
Ah wait, You guys aren't used to the new key mapping
I've been using this since August
Scroll: Vol up and down or home and back
Up to top: Menu (different from CWM 5)
Select: Search (different from CWM 5)
Click to expand...
Click to collapse
Been thru all that. Search doesn't work either. Search and Power are supposed to select the options

bill.weckel said:
LOL. In case someone does get stuck however, there is a simple fix.
Extract preferred recovery to the root of your sdcard. Make sure it's named 'recovery.img'.
Open Terminal Emulator
Type "su" without quotes and press Enter. Grant SuperUser request when asked
Type "flash_image recovery sdcard/recovery.img" without quotes and press Enter.
Wait for process to finish. You'll see things happening in terminal emulator
Optionally, type "exit" without quotes and press Enter two times to back out of Terminal Emulator.
You're done.
Click to expand...
Click to collapse
If you can't boot into rom, that doesn't work...
And the p506 recovery doesn't have a selection button, as stated before by other users...

I guess you'll have to pull the battery, and then boot normally.
Sent from my LG-P500 using xda app-developers app

ibub said:
I guess you'll have to pull the battery, and then boot normally.
Sent from my LG-P500 using xda app-developers app
Click to expand...
Click to collapse
That's exactly what I had to do. And since my device doesn't have fastboot installed on it, I needed the mentioned alternate method to restore my recovery partition, otherwise I would have just used Android Flash Recovery.

Well at least it booted, right?
Sent from my LG-P500 using xda app-developers app

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
:good:

ibub said:
Well at least it booted, right?
Sent from my LG-P500 using xda app-developers app
Click to expand...
Click to collapse
Yes sir

Booting is not a good thing. It is an EXPECTED thing... If something of mine doesn't boot, I'm not a happy camper. So now to fix this weird issue, eh? I think Koush may have played around with it a bit. Bill, can you try this IMG? This is the original P509 one I built from source before I had the CWM builder build it into a "real" CWM
http://jenkins.cyanogenmod.org/job/recovery/16075/artifact/archive/inputrecovery.img
See if that has the same issue

I have fastboot. Bill doesn't. Maybe I should be honorary lab rat.
Sent from my LG-P500 using xda app-developers app

[RECOVERY][OFFICIAL] TWRP for ZUK Z1

Official TWRP Recovery for Lenovo Zuk Z1 from TeamWin.
https://twrp.me/devices/zukz1.html
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Information from TWRP Project:
Code:
[SIZE="4"]Disclaimer:
Team Win strives to provide a quality product. However, it is your decision to install our software on your device. Team Win takes no responsibility for any damage that may occur from installing or using TWRP.
Status:
Support Status: Current
Maintainer: juliusssssmiui
Code Name: ham
[URL="https://github.com/TeamWin/android_device_zuk_Z1"]Device Tree / files[/URL]
App Install Method (Requires Root):
Download the TWRP Manager app:
[URL="http://play.google.com/store/apps/details?id=com.jmz.soft.twrpmanager"]Play Store[/URL]
No Play Store? Find a direct download link at the bottom of this page.
Install the app and open it. Tap on Install TWRP. Select your device from the device list (ham) and then tap on Install Recovery. The file will download and be installed automatically.
Download Links:
Current and past versions of TWRP can be found at one of the mirrors below:
[URL="https://dl.twrp.me/Z1"]Primary (Recommended)[/URL]
TWRP Install (Requires TWRP 2.8.4 or higher already installed):
Download the latest TWRP image file (.img) from the download link and boot TWRP. Go to install and find and select the Images... button. Browse to the image that you downloaded and select it. Choose recovery and swipe to flash.
Fastboot Install Method (No Root Required):
[URL="http://developer.android.com/sdk/index.html"]You will need the platform-tools from the Android SDK[/URL] on your computer. Find the SDK Only section on the page linked and install the SDK and download only the platform-tools to get adb and fastboot binaries.
Windows users will need proper drivers installed on your computer. You can try the [URL="http://www.xda-developers.com/universal-naked-driver-solves-your-adb-driver-problems-on-windows/"]Naked ADB drivers[/URL] or the [URL="http://www.koushikdutta.com/post/universal-adb-driver"]Universal ADB drivers[/URL] if you don't already have a working driver installed
On your device, go into Settings -> About and find the Build Number and tap on it 7 times to enable developer settings. Press back and go into Developer Options and enable USB debugging. From your computer, open a command prompt and type:
adb reboot bootloader
You should now be in fastboot mode. Download the correct image file and copy the file into the same folder as your adb and fastboot binaries. Rename the image to twrp.img and type:
fastboot flash recovery twrp.img
fastboot reboot
Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install.[/SIZE]
All credits for TeamWin Project - https://twrp.me/about/

good to see it got official.

Direct linkt
https://dl.twrp.me/Z1/twrp-3.0.2-0-Z1.img
Enviado desde mi Z1 mediante Tapatalk

updated my unnofficial 2.7.8 twrp via image flash in old recovery without a problem

Still don't support OTG.

Awesome! Going to install this and CM13 soon.

Im noob member. I read somewhere about flash zuk by fastboot. But i alway see "0x2b4c" in every fastboot. I ever flashed many device by fastboot, but simple as fastboot flash system or fastboot flash recovery...
I dont know 0x2b4c mean???

md07 said:
Im noob member. I read somewhere about flash zuk by fastboot. But i alway see "0x2b4c" in every fastboot. I ever flashed many device by fastboot, but simple as fastboot flash system or fastboot flash recovery...
I dont know 0x2b4c mean???
Click to expand...
Click to collapse
it's vendor id of Zuk Z1
https://wiki.cyanogenmod.org/w/Install_CM_for_ham

When I flash TWRP recovery, my mobile doesn't go into recovery mode ,
But when I restore stock recovery it works just fine.
Sent from my Z1 using XDA-Developers mobile app

Nizamani said:
When I flash TWRP recovery, my mobile doesn't go into recovery mode ,
But when I restore stock recovery it works just fine.
Sent from my Z1 using XDA-Developers mobile app
Click to expand...
Click to collapse
Try downloading and flashing again. Are you flashing through Flashify app?
As well check if you have OEM unlocking ON, Update Cyanogen Recovery off and Android Debugging ON before flashing. Hope it helps.

Shivver said:
Try downloading and flashing again. Are you flashing through Flashify app?
As well check if you have OEM unlocking ON, Update Cyanogen Recovery off and Android Debugging ON before flashing. Hope it helps.
Click to expand...
Click to collapse
Yes flashing with flashify and Rashr,
What is OEM unlocking ON?
Sent from my Z1 using XDA-Developers mobile app
---------- Post added 03-05-2016 at 12:18 AM ---------- Previous post was 02-05-2016 at 11:50 PM ----------
Still no luck , tried after enabling Debugging mode and OEM unlocking ON
Sent from my Z1 using XDA-Developers mobile app

Really strange? Did you try wipe/full wipe device before?

I didn't do full wipe, I can't, this is my main device.
Sent from my Z1 using XDA-Developers mobile app

Nizamani said:
I didn't do full wipe, I can't, this is my main device.
Sent from my Z1 using XDA-Developers mobile app
Click to expand...
Click to collapse
I'm doing full wipe almost every 2 months and it's my only device as well. Just sync everything with your Google account and do app list backup by AppWererabbit app for example. Probably it will solve your issue.

hi , how to unlock the bootloader and install this version of TWRP ? because I 've never used fastboot and it makes me a little scared.
In the past I did it on my Galaxy S3 via ODIN but it is the great unknown .
Finding no real tutorial to the Z1 I find myself in a bind.
Cordially.

Nivek71 said:
hi , how to unlock the bootloader and install this version of TWRP ? because I 've never used fastboot and it makes me a little scared.
In the past I did it on my Galaxy S3 via ODIN but it is the great unknown .
Finding no real tutorial to the Z1 I find myself in a bind.
Cordially.
Click to expand...
Click to collapse
Hi,
I will try to help.
1. First activate your Developer options from About Phone clicking many times on Build number
2. Then go back to developer settings and do OEM Unlocking and give full Root Access. Switch on Android Debugging as well.
3. Go to security and allow Unknown Sources
Then probably the best way is to use this tool:
http://forum.xda-developers.com/zuk-z1/development/win-zuk-z1-toolkit-0-1-alpha-t3235964
Or just download Flashify and flash downloaded twrp.img file from there.
https://www.youtube.com/watch?v=-dUSBatNwpY
This can help you as well:
https://www.youtube.com/watch?v=iEehR8zjiYk
Good luck

I have backup with titanium backup, wipe will delete it or it will remain in phone?
Sent from my Z1 using XDA-Developers mobile app

Nizamani said:
I have backup with titanium backup, wipe will delete it or it will remain in phone?
Sent from my Z1 using XDA-Developers mobile app
Click to expand...
Click to collapse
if you don't wipe internal sd it will stay. check in titanium where is your backup, you can as well copy your backup folder to your computer to make sure you won't lose it.
Full Wipe:
Wipe Data
Format System
Format Cache
Format Dalvik Cache

Nizamani said:
I didn't do full wipe, I can't, this is my main device.
Sent from my Z1 using XDA-Developers mobile app
Click to expand...
Click to collapse
I believe using flashify needs a source path which is not local to your phone.... I can only explain this to the best of my experience before.... I had a kingston DataTraveler microDuo 3C and this is where i have transferred the file to when i did flashify. Upon doing this without the removal of this after reboot, it succesfully installed. I hope i am making sense as i did have the previous problem as i paid for support for Flashify and nothing happened when the *.img was on the memory of my phone.... if anyone can explain better why this is that would be better....

Zuk Z1 don't have external SD card
Sent from my Z1 using XDA-Developers mobile app
---------- Post added at 08:05 PM ---------- Previous post was at 08:04 PM ----------
Zuk Z1 don't have external SD card
taba4real said:
I believe using flashify needs a source path which is not local to your phone.... I can only explain this to the best of my experience before.... I had a kingston DataTraveler microDuo 3C and this is where i have transferred the file to when i did flashify. Upon doing this without the removal of this after reboot, it succesfully installed. I hope i am making sense as i did have the previous problem as i paid for support for Flashify and nothing happened when the *.img was on the memory of my phone.... if anyone can explain better why this is that would be better....
Click to expand...
Click to collapse
Sent from my Z1 using XDA-Developers mobile app

[Recovery][OFFICIAL] TWRP V3 For LG STYLO 3 PLUS

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclamer
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
WARNING: The stock boot image has dm-verity, which prevents you from booting if you swipe to enable system modifications!
SOLUTION: Flash a root such as SuperSU or phh-superuser. You can also flash no-verity-opt-encrypt.zip.
Supported Models :
TP450 & MP450 & LGM470
Prerequisites :
YOUR BOOTLOADER MUST BE UNLOCKED
How to unlock the bootloader :
1-enable oem unlock in the developer settings
2-reboot to fastboot [adb reboot bootloader] then issue this command [fastboot oem unlock]
note: this will wipe your data]
Click to expand...
Click to collapse
-If you have problems with the device drivers installed , you will need to install lg bridge, you can download it from here:
http://tool.lime.gdms.lge.com/dn/downloader.dev?fileKey=PWZO7A26B9UW
How to flash Twrp:
BOOT INTO FASTBOOT MODE:
With your phone off, connect your usb cable to your phone while holding VOLUME DOWN to boot into fastboot mode or just type [adb reboot bootloader] in the adb terminal
ONCE YOU ARE IN FASTBOOT MODE:
Open a command prompt and type "fastboot flash recovery <path_to_recovery.img>” without the quotation marks.
Example: fastboot flash recovery C:/Users/John/Desktop/recovery.img
[don't forget to extract the downloaded recovery zip to get the recovery.img]
WHEN THE FLASH COMPLETES: (Takes about 2 seconds)
On your phone, unplug the usb cable and power it off by taking out the battery and putting it back in.
BOOT INTO RECOVERY MODE FOR THE FIRST TIME
HOLD VOLUME DOWN + POWER until you see the LG logo and then temporarily release the POWER button, immediately pressing and holding it back down until you see the white prompt [factory reset] screen. You will NEVER release the volume down button in this process!
Use the hard keys to select "YES" and then "YES" again to boot into TWRP
Notice: After the TWRP splash screen you will see the option to type in the password to decrypt the filesystem just ignore it and press the cancel button.
Click to expand...
Click to collapse
How to Disable encryption and flash super su [Root Your Device]:
1. In TWRP, go to Wipe > Format Data. Enter the keyword ‘yes‘, in the provided space and enter. This will wipe the automatically encrypted filesystem, and decrypt it.
2. Once the wiping is done, reboot back into recovery. Go to Reboot > Recovery.
3. When the recovery boots again, connect your phone to the PC and Enable MTP under the Mount section.
4. Transfer the downloaded ‘no-verity-opt-encrypt-**.zip’ and ‘SR1-SuperSU-v2.78-SR1-20160915123031.zip to your internal storage or EXTSD
5. Disconnect the device now.
6. Tap on Install. Now, navigate your phone’s storage and select ‘no-verity-opt-encrypt-**.zip’. Finally swipe the ‘Swipe to confirm Flash’ button on the bottom of the screen.
7. The flashing process will merely take a few seconds. And when it’s done, follow the same method to flash the root package – SR1-SuperSU-v2.78-SR1-20160915123031.zip [/B]
Wait 1 or 2 minutes after the zip files are done flashing then reboot system and PROFIT! Your phone may take 3-5 minutes to boot the first time and it might boot-loop once or twice at the Metro PCS splash screen but don’t worry this is expected.
Click to expand...
Click to collapse
Downloads:
https://twrp.me/lg/lgstylo3plus.html
Additional Downloads:
SuperSU stable by Chainfire
dm-verity and force encryption disabler
[Please do not mirror the downloads]
Credits: Me, Teamwin, my tester @ghet2rockuu
Device Tree:
https://github.com/TeamWin/android_device_lge_sf340n
Please note I don't own this device, lg didn't release the stock firmware yet, spend a lot of my time bringing these builds for you to use and benefit from. make sure to hit the thanks button and consider to donate if you appreciate my work
Paypal donation link: https://paypal.me/messi2050

evrything working good thanks alot

ghet2rockuu said:
evrything working good thanks alot
Click to expand...
Click to collapse
Yw, thanks for testing

everything working thanks for this!

cant change themixer file when i save keeps saying file read only n wont let me save weird because it use to work on es file explorer
nvrmnd fixed it by changing permissions
---------- Post added at 06:49 PM ---------- Previous post was at 06:23 PM ----------
how can i get a original boot image i need it to install latest magisk i have itinstalled but its asking to update and i cant with out original boot image

ghet2rockuu said:
cant change themixer file when i save keeps saying file read only n wont let me save weird because it use to work on es file explorer
nvrmnd fixed it by changing permissions
---------- Post added at 06:49 PM ---------- Previous post was at 06:23 PM ----------
how can i get a original boot image i need it to install latest magisk i have itinstalled but its asking to update and i cant with out original boot image
Click to expand...
Click to collapse
You better have a backup before tying any mod as there is no available stock firmware for download it will be very difficult to fix a brick without a backup

messi2050 said:
You better have a backup before tying any mod as there is no available stock firmware for download it will be very difficult to fix a brick without a backup
Click to expand...
Click to collapse
i thnk it can be repaired with lg back up . but i got evrythng working , just magisk cant update , says need original boot image

ghet2rockuu said:
i thnk it can be repaired with lg back up . but i got evrythng working , just magisk cant update , says need original boot image
Click to expand...
Click to collapse
No unfortunately stock rom is not available in lg bridge yet.

download link fixed

Which version do I need?? dm-verity and force encryption disabler

SoonersChuck said:
Which version do I need?? dm-verity and force encryption disabler
Click to expand...
Click to collapse
Last version should work.

I'm having a hard time trying to get to thw TWRP screen! :/
This is all I get:
"your device software cannot be checked for corruption. Lock the bootloader"
---------- Post added at 02:10 AM ---------- Previous post was at 02:07 AM ----------
70p487 said:
i'm having a hard time trying to get to thw twrp screen! :/
this is all i get:
"your device software cannot be checked for corruption. Lock the bootloader"
Click to expand...
Click to collapse
edit: Wait! I got it! Lol!
Messi! You are a true hero!!!! Thank you soooo much! <3

Yo guys! Finally!!! I'm attempting this! I have the T-Mobile variant, should b ok?
Sent from my LG-TP450 using XDA-Developers Legacy app

zounduser said:
Yo guys! Finally!!! I'm attempting this! I have the T-Mobile variant, should b ok?
Sent from my LG-TP450 using XDA-Developers Legacy app
Click to expand...
Click to collapse
Yea go ahead

Hell ya. What you guys think of this phone? I'm loving mine! I came from the Note 4, and this phone is way faster, with lower specs. But ya I'm really liking this phone. Can't wait to get home and get root and recovery on this bad boy! Thank you!
Sent from my LG-TP450 using XDA-Developers Legacy app

Best Believe It...
zounduser said:
Hell ya. What you guys think of this phone? I'm loving mine! I came from the Note 4, and this phone is way faster, with lower specs..
Click to expand...
Click to collapse
Thanks to a *Demi-God* named Messi... I'm kicking the front door open in about 8 hours and DEMANDING they sell me a LG Stylo 3+..
They go on sale for $149.00 starting @ store opening.. :good:
Talk about Karma.. GREAT timing Messi !

so i dont swipe to allow modifications? in TWRP? im in TWRP on that screen. do i keep it read only???

zounduser said:
so i dont swipe to allow modifications? in TWRP? im in TWRP on that screen. do i keep it read only???
Click to expand...
Click to collapse
I thought if u didn't...then u don't have root...I'm finally able to sit and concentrate on this...failed attempt yesterday was because I was in a hurry

SoonersChuck said:
I thought if u didn't...then u don't have root...I'm finally able to sit and concentrate on this...failed attempt yesterday was because I was in a hurry
Click to expand...
Click to collapse
No I kept it read only and everything went perfect

A simple way to show you appreciate development is to hit that thanks button on the first post, so make sure to hit it as a simple way to show continued support!

[Recovery] [Unofficial] Twrp v3 For LG Aristo 2

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclamer
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
WARNING: The stock boot image has dm-verity, which prevents you from booting if you swipe to enable system modifications!
SOLUTION: Flash a root such as SuperSU or phh-superuser. You can also flash no-verity-opt-encrypt.zip.
Prerequisites :
YOUR BOOTLOADER MUST BE UNLOCKED
How to unlock the bootloader :
1-enable oem unlock in the developer settings
2-reboot to fastboot [adb reboot bootloader] then issue this command [fastboot oem unlock]
note: this will wipe your data]
Click to expand...
Click to collapse
-If you have problems with the device drivers installed , you will need to install lg bridge, you can download it from here:
http://tool.lime.gdms.lge.com/dn/downloader.dev?fileKey=PWZO7A26B9UW
How to flash Twrp:
BOOT INTO FASTBOOT MODE:
With your phone off, connect your usb cable to your phone while holding VOLUME DOWN to boot into fastboot mode or just type [adb reboot bootloader] in the adb terminal
ONCE YOU ARE IN FASTBOOT MODE:
Open a command prompt and type "fastboot flash recovery <path_to_recovery.img>” without the quotation marks.
Example: fastboot flash recovery C:/Users/John/Desktop/recovery.img
[don't forget to extract the downloaded recovery zip to get the recovery.img]
WHEN THE FLASH COMPLETES: (Takes about 2 seconds)
On your phone, unplug the usb cable and power it off by taking out the battery and putting it back in.
BOOT INTO RECOVERY MODE FOR THE FIRST TIME
HOLD VOLUME DOWN + POWER until you see the LG logo and then temporarily release the POWER button, immediately pressing and holding it back down until you see the white prompt [factory reset] screen. You will NEVER release the volume down button in this process!
Use the hard keys to select "YES" and then "YES" again to boot into TWRP
How to Disable encryption and flash super su [Install Root]:
1. In TWRP, go to Wipe > Format Data. Enter the keyword ‘yes‘, in the provided space and enter. This will wipe the automatically encrypted filesystem, and decrypt it.
2. Once the wiping is done, reboot back into recovery. Go to Reboot > Recovery.
3. When the recovery boots again, connect your phone to the PC and Enable MTP under the Mount section.
4. Transfer the downloaded ‘no-verity-opt-encrypt-**.zip’ and ‘SR1-SuperSU-v2.78-SR1-20160915123031.zip to your internal storage or EXTSD
5. Disconnect the device now.
6. Tap on Install. Now, navigate your phone’s storage and select ‘no-verity-opt-encrypt-**.zip’. Finally swipe the ‘Swipe to confirm Flash’ button on the bottom of the screen.
7. The flashing process will merely take a few seconds. And when it’s done, follow the same method to flash the root package – SR1-SuperSU-v2.78-SR1-20160915123031.zip [/B]
Wait 1 or 2 minutes after the zip files are done flashing then reboot system and PROFIT! Your phone may take 3-5 minutes to boot the first time and it might boot-loop once or twice at the Metro PCS splash screen but don’t worry this is expected.
Click to expand...
Click to collapse
Downloads :
#1
https://www.mediafire.com/download/uxquk880q8pkurl
Additional Downloads :
SuperSU stable by Chainfire
dm-verity and force encryption disabler
Notice: After the TWRP splash screen you will see the option to type in the password to decrypt the filesystem just ignore it and press the cancel button.
Credits :
TeamWin, Me
Please hit the thanks button and conider to donate if you appreciate my work :highfive:
Paypal donation link: https://paypal.me/messi2050

What version of TWRP is this

brad2192 said:
What version of TWRP is this
Click to expand...
Click to collapse
Same as aristo 1

So, you made it from what source?

brad2192 said:
So, you made it from what source?
Click to expand...
Click to collapse
Are you investigating me :laugh: , ported it from my aristo 1 recovery.

messi2050 said:
Are you investigating me :laugh: , ported it from my aristo 1 recovery.
Click to expand...
Click to collapse
Just strange that a TWRP recovery just came out for the same device 2 hours previous to your post.

brad2192 said:
Just strange that a TWRP recovery just came out for the same device 2 hours previous to your post.
Click to expand...
Click to collapse
Ah actually is strange that the one you are talking about came directly after i posted on your topic saying I posted test twrp for aristo 2 on my blog (posted 4 days ago on my blog)
https://forum.xda-developers.com/showpost.php?p=75558782&postcount=16
https://messi2050.blogspot.com.eg

I was not aware of that friend, my apologies.

I'm having an issue, Instagram Twitter and Facebook refuse to update after using magisk, so I switched to SuperSU and I still have the same problem. The only way to get it to work is to remove root. I can't even connect to them through the browser it keeps saying failed to uodate

KyleBryant said:
I'm having an issue, Instagram Twitter and Facebook refuse to update after using magisk, so I switched to SuperSU and I still have the same problem. The only way to get it to work is to remove root. I can't even connect to them through the browser it keeps saying failed to uodate
Click to expand...
Click to collapse
That's probably because of adblock or similar sw

Tried it again no adblock and then google play services kept crashing I couldn't even add my account

Fixed it, forgot I had removed chrome and that was the issue for some reason

when i try to flash twrp i get the response "error can not load" plz. help

ive been having trouble flashing a rom to the aristo 2 because of the buildprop device values being incorrect. how can this be fixed?

messi2050 said:
Same as aristo 1
Click to expand...
Click to collapse
3.0.3.0

Trying this, I get an error "Failed to mount '/data' (No such device)"

tge101 said:
Trying this, I get an error "Failed to mount '/data' (No such device)"
Click to expand...
Click to collapse
Sounds like your partition table is hosed, brother.
Follow this post to restore your phone:
https://forum.xda-developers.com/showpost.php?p=76799751&postcount=91

tecknight said:
Sounds like your partition table is hosed, brother.
Follow this post to restore your phone:
https://forum.xda-developers.com/showpost.php?p=76799751&postcount=91
Click to expand...
Click to collapse
I got it restored eventually but im still having the same issur that made me try a factory reset in the first place. Half the time, i need to reboot for my phone to charge and some of those times the notifications that its charging and that debug is on stay in the status bar. Im at my wits end.

I just grabbed an Aristo 2 and though I don't know how long I'll have it, in my free time ( which is limited ) I'm going to be working on getting a full rom package with kernel compiled. What would you guys like to see? I primarily focus on flagships, and this is definitely a budget device but it's been working well for me despite the snapdragon 425 and only 2gb ram...I'd like to see some development for this thing and though I've only spent about 20 minutes looking around on xda it seems it's very limited (which is to be expected)...Can someone give me a brief rundown on where we are with the device and what yet needs accomplished to be ready for a compile? Are sources available (kernel source, etc)? I thought I read back in another post (messi2050?) that some sources had been obtained? I'm going to go back over it and see what else is needed....do we have defconfig and whatnot to build? Any info you guys can paraphrase will make this all a lot faster since I've got very limited time to research but access to a poweredge r330 blade with 32GB and a 3.4ghz octa to compile on....I've already set up the VM with linux and am waiting to see what else I find that I'm going to need and decide on a build (lineage, cm, stock rooted, etc) before I take the time to download android source....I've only got a 50mbps line coming into the server so a 40gb source download isn't exactly fast and I work construction so I'm in and out but never seem to have EXTENDED periods of time to sit down and burn the keyboard up....
Thanks guys....I'm about to install Tapatalk on the device and I'll be out-n-about checking on jobs in the field but if anyone wants to DM me and bring me up to speed I'll be sure to reply....In the meantime as time allows I can remote the server at the office if need be....
-Rx8driver

I've also noticed that driver issues are pretty noticeable using win10 in fastboot mode...i had to load the Google driver manually to get fastboot mode working... if you're having issues take a close look thru the device manager and make sure the lg driver is properly loaded when the device is in fastboot and download modes if you're running win10...
Sent from my LM-X210(G) using Tapatalk