{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclamer
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
WARNING: The stock boot image has dm-verity, which prevents you from booting if you swipe to enable system modifications!
SOLUTION: Flash a root such as SuperSU or phh-superuser. You can also flash no-verity-opt-encrypt.zip.
Supported Models :
TP450 & MP450 & LGM470
Prerequisites :
YOUR BOOTLOADER MUST BE UNLOCKED
How to unlock the bootloader :
1-enable oem unlock in the developer settings
2-reboot to fastboot [adb reboot bootloader] then issue this command [fastboot oem unlock]
note: this will wipe your data]
Click to expand...
Click to collapse
-If you have problems with the device drivers installed , you will need to install lg bridge, you can download it from here:
http://tool.lime.gdms.lge.com/dn/downloader.dev?fileKey=PWZO7A26B9UW
How to flash Twrp:
BOOT INTO FASTBOOT MODE:
With your phone off, connect your usb cable to your phone while holding VOLUME DOWN to boot into fastboot mode or just type [adb reboot bootloader] in the adb terminal
ONCE YOU ARE IN FASTBOOT MODE:
Open a command prompt and type "fastboot flash recovery <path_to_recovery.img>” without the quotation marks.
Example: fastboot flash recovery C:/Users/John/Desktop/recovery.img
[don't forget to extract the downloaded recovery zip to get the recovery.img]
WHEN THE FLASH COMPLETES: (Takes about 2 seconds)
On your phone, unplug the usb cable and power it off by taking out the battery and putting it back in.
BOOT INTO RECOVERY MODE FOR THE FIRST TIME
HOLD VOLUME DOWN + POWER until you see the LG logo and then temporarily release the POWER button, immediately pressing and holding it back down until you see the white prompt [factory reset] screen. You will NEVER release the volume down button in this process!
Use the hard keys to select "YES" and then "YES" again to boot into TWRP
Notice: After the TWRP splash screen you will see the option to type in the password to decrypt the filesystem just ignore it and press the cancel button.
Click to expand...
Click to collapse
How to Disable encryption and flash super su [Root Your Device]:
1. In TWRP, go to Wipe > Format Data. Enter the keyword ‘yes‘, in the provided space and enter. This will wipe the automatically encrypted filesystem, and decrypt it.
2. Once the wiping is done, reboot back into recovery. Go to Reboot > Recovery.
3. When the recovery boots again, connect your phone to the PC and Enable MTP under the Mount section.
4. Transfer the downloaded ‘no-verity-opt-encrypt-**.zip’ and ‘SR1-SuperSU-v2.78-SR1-20160915123031.zip to your internal storage or EXTSD
5. Disconnect the device now.
6. Tap on Install. Now, navigate your phone’s storage and select ‘no-verity-opt-encrypt-**.zip’. Finally swipe the ‘Swipe to confirm Flash’ button on the bottom of the screen.
7. The flashing process will merely take a few seconds. And when it’s done, follow the same method to flash the root package – SR1-SuperSU-v2.78-SR1-20160915123031.zip [/B]
Wait 1 or 2 minutes after the zip files are done flashing then reboot system and PROFIT! Your phone may take 3-5 minutes to boot the first time and it might boot-loop once or twice at the Metro PCS splash screen but don’t worry this is expected.
Click to expand...
Click to collapse
Downloads:
https://twrp.me/lg/lgstylo3plus.html
Additional Downloads:
SuperSU stable by Chainfire
dm-verity and force encryption disabler
[Please do not mirror the downloads]
Credits: Me, Teamwin, my tester @ghet2rockuu
Device Tree:
https://github.com/TeamWin/android_device_lge_sf340n
Please note I don't own this device, lg didn't release the stock firmware yet, spend a lot of my time bringing these builds for you to use and benefit from. make sure to hit the thanks button and consider to donate if you appreciate my work
Paypal donation link: https://paypal.me/messi2050
evrything working good thanks alot
ghet2rockuu said:
evrything working good thanks alot
Click to expand...
Click to collapse
Yw, thanks for testing
everything working thanks for this!
cant change themixer file when i save keeps saying file read only n wont let me save weird because it use to work on es file explorer
nvrmnd fixed it by changing permissions
---------- Post added at 06:49 PM ---------- Previous post was at 06:23 PM ----------
how can i get a original boot image i need it to install latest magisk i have itinstalled but its asking to update and i cant with out original boot image
ghet2rockuu said:
cant change themixer file when i save keeps saying file read only n wont let me save weird because it use to work on es file explorer
nvrmnd fixed it by changing permissions
---------- Post added at 06:49 PM ---------- Previous post was at 06:23 PM ----------
how can i get a original boot image i need it to install latest magisk i have itinstalled but its asking to update and i cant with out original boot image
Click to expand...
Click to collapse
You better have a backup before tying any mod as there is no available stock firmware for download it will be very difficult to fix a brick without a backup
messi2050 said:
You better have a backup before tying any mod as there is no available stock firmware for download it will be very difficult to fix a brick without a backup
Click to expand...
Click to collapse
i thnk it can be repaired with lg back up . but i got evrythng working , just magisk cant update , says need original boot image
ghet2rockuu said:
i thnk it can be repaired with lg back up . but i got evrythng working , just magisk cant update , says need original boot image
Click to expand...
Click to collapse
No unfortunately stock rom is not available in lg bridge yet.
download link fixed
Which version do I need?? dm-verity and force encryption disabler
SoonersChuck said:
Which version do I need?? dm-verity and force encryption disabler
Click to expand...
Click to collapse
Last version should work.
I'm having a hard time trying to get to thw TWRP screen! :/
This is all I get:
"your device software cannot be checked for corruption. Lock the bootloader"
---------- Post added at 02:10 AM ---------- Previous post was at 02:07 AM ----------
70p487 said:
i'm having a hard time trying to get to thw twrp screen! :/
this is all i get:
"your device software cannot be checked for corruption. Lock the bootloader"
Click to expand...
Click to collapse
edit: Wait! I got it! Lol!
Messi! You are a true hero!!!! Thank you soooo much! <3
Yo guys! Finally!!! I'm attempting this! I have the T-Mobile variant, should b ok?
Sent from my LG-TP450 using XDA-Developers Legacy app
zounduser said:
Yo guys! Finally!!! I'm attempting this! I have the T-Mobile variant, should b ok?
Sent from my LG-TP450 using XDA-Developers Legacy app
Click to expand...
Click to collapse
Yea go ahead
Hell ya. What you guys think of this phone? I'm loving mine! I came from the Note 4, and this phone is way faster, with lower specs. But ya I'm really liking this phone. Can't wait to get home and get root and recovery on this bad boy! Thank you!
Sent from my LG-TP450 using XDA-Developers Legacy app
Best Believe It...
zounduser said:
Hell ya. What you guys think of this phone? I'm loving mine! I came from the Note 4, and this phone is way faster, with lower specs..
Click to expand...
Click to collapse
Thanks to a *Demi-God* named Messi... I'm kicking the front door open in about 8 hours and DEMANDING they sell me a LG Stylo 3+..
They go on sale for $149.00 starting @ store opening.. :good:
Talk about Karma.. GREAT timing Messi !
so i dont swipe to allow modifications? in TWRP? im in TWRP on that screen. do i keep it read only???
zounduser said:
so i dont swipe to allow modifications? in TWRP? im in TWRP on that screen. do i keep it read only???
Click to expand...
Click to collapse
I thought if u didn't...then u don't have root...I'm finally able to sit and concentrate on this...failed attempt yesterday was because I was in a hurry
SoonersChuck said:
I thought if u didn't...then u don't have root...I'm finally able to sit and concentrate on this...failed attempt yesterday was because I was in a hurry
Click to expand...
Click to collapse
No I kept it read only and everything went perfect
A simple way to show you appreciate development is to hit that thanks button on the first post, so make sure to hit it as a simple way to show continued support!
Related
url=http://postimage.org/]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[/url]
photo hosting sites
Hello World. This is official version of TWRP recovery for SM-G355HN
http://teamw.in/devices/samsunggalaxycore2.html
And tested for SM-G355H TWRP 3.0.0-0 :
http://forum.xda-developers.com/showpost.php?p=65784717&postcount=130
disclaimer:
I/XDA/higher power/is not responsible for any kind of damage to your device,
or in case it explodes, nuclear war etc.
Please use it at your own risk! Whatever you do with your phone it's your own choice!
Click to expand...
Click to collapse
Requirement :
1. PC/Laptop/Netbook.
2. Odin3 v3.09 or any other
3. odin_recovery.tar.md5.V_3.0.0.0.zip
4. Samsung USB Driver
5. USB Cable.
Click to expand...
Click to collapse
How to install for ODIN:
1. Install Samsung USB Driver on your PC/Laptop or something else
2. Extract odin and odin_recovery.tar.md5.V_3.0.0.0.zip in the same folder
3. Open Odin
4. Reboot phone in Download Mode by pressing and hold Home + Power + Volume Down buttons)
5. Connect phone and wait until detected on odin
6. Add the recovery.tar.md5 file to AP / PDA
7. Make sure re-partition is NOT ticked
8. Click the start button, sit back and wait a few minutes
9. Wait until the flashing process is complete
Click to expand...
Click to collapse
How to go recovery for installing flashable zip:
1. Turn off you phone
2. Press and hold together Volume up + Home + Power buttons until phone vibrate then let go.
3. Now you are in recovery mode.
4. Select install TWRP_SM-G355HN_3_0_0_0.zip
Click to expand...
Click to collapse
Warning:
Please do not try to repartition ext-sd with twrp because I didn't get that far. If you really need that use your PC and micro usb adapter.
Credits goes to:
- TeamWin
- OmniROM (for bootable recovery)
- CyanogenMod (for sources)
- Me
- And all who contributed
My sources on github who want to contribute:
https://github.com/Y300-0100/twrp_android_device_samsung_kanas3gnfcxx
XDA:DevDB Information
TWRP Recovery V2.8.1.0, Tool/Utility for the Samsung Galaxy Core
Contributors
Y300-0100,
Version Information
Status: Stable
Created 2015-01-09
Last Updated 2015-05-18
changes:
- updated to 3.0.0-0
- updated to 2.8.7.0
- MTP function while in recovery stable?? ( samsung have issue with this)
- fixed minor errors
Updates
For those who don't have pc to flash recovery via odin and if they not sure if new one will work must have installed android terminal.
https://play.google.com/store/apps/d...al.androidterm
To back up current recovery type in terminal next:
Code:
su
dd if=/dev/block/mmcblk0p18 of=/sdcard/recovery.img
and check is your recovery on your internal storage.
To flash it back type next:
Code:
dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p18
No reboot required.
__________________________________________________________
For ODIN use recovery files are attached.
wooooooooooooooow , very goood job brother
the next task must be porting cm 12
sry for my bad english
SMCORE2 said:
wooooooooooooooow , very goood job brother
the next task must be porting cm 12
sry for my bad english
Click to expand...
Click to collapse
As I said before we need team for that. So...
Y300-0100 said:
As I said before we need team for that. So...
Click to expand...
Click to collapse
Ahhh ok , cuz i read ur comment just now so , im sorry
I have been doing some research about important backup of samsung files so I found that backup of EFS is very important because it's folder contains
Phone-specific information such as the IMEI, wireless devices MAC addresses, product code, and much more. If this thing not handled properly, can turn your device completely useless as it will no longer be recognized by your carrier.
Problem is, flashing custom ROMs sometime can corrupt contains within EFS folder. That’s why backing up EFS folder is very important if you love to flash new ROM.
Click to expand...
Click to collapse
So I will include that as backup option.
Also same thing with modem looking at twrp github for samsung devices so I will add that to. And my opinion maybe not wise but I think that recovery also need to be included in backup.
That's my 5 cents
Anyone to back me up or to add 5 cents more
Nice work!
Keep it up
Data app 2 ext-sd is possible
picture share
But use pc to partition sd as ext4. I would't like you to screw something. google first how to
And 2nd post updated.
Good job . After last update what is not working now
Sent from my SM-G355H using XDA Free mobile app
younis12c said:
Good job . After last update what is not working now
Sent from my SM-G355H using XDA Free mobile app
Click to expand...
Click to collapse
as
Y300-0100 said:
added
What is left to be done:
- mount as usb/mtp in recovery
- backup cache
Click to expand...
Click to collapse
Some impressions, comments and suggestions would be nice. Because I don't know am I doing this right at all
First of all.. Thanks for your hard work on our SGC2 recovery!
I hope with this, SGC2 has it's own forum as soon as possible
Btw. I confirmed this working for samsung galaxy core 2 duos (G355H) as well
everything looks fine.. touch screen working, but I haven't touched any feature aside from reboot to system which was working
but i believe everything should be working fine
you should change the thread name as your recovery support G355H too :good:
good work bro
---------- Post added at 01:34 PM ---------- Previous post was at 01:04 PM ----------
@Y300-0100 : what version of omnirom you use to build this twrp ? based on kitkat or lollipop ?
cleverior.ipul said:
good work bro
---------- Post added at 01:34 PM ---------- Previous post was at 01:04 PM ----------
@Y300-0100 : what version of omnirom you use to build this twrp ? based on kitkat or lollipop ?
Click to expand...
Click to collapse
Only omni bootable recovery 4.4 and rest is CM-11.
No need to root the device?(Samsung Galaxy Core 2 DUOS)
novhexzhen said:
No need to root the device?(Samsung Galaxy Core 2 DUOS)
Click to expand...
Click to collapse
I don't know. I rooted my phone before twrp but as I recall twrp detect that phone is not rooted and it should install su binary and apk after confirmation and restart.
Btw is it possible to add aroma file manager or something else in TWRP as permanently feature just like in CWM?
giew13 said:
Btw is it possible to add aroma file manager or something else in TWRP as permanently feature just like in CWM?
Click to expand...
Click to collapse
No. What's wrong with current file manager? It's not working?
Works AWSOME bro, great job!!!! THANKS
Y300-0100 said:
I don't know. I rooted my phone before twrp but as I recall twrp detect that phone is not rooted and it should install su binary and apk after confirmation and restart.
Click to expand...
Click to collapse
thanks matey. i will try this later if there is an available feedback from unrooted phones who install TWRP:good:
Y300-0100 said:
No. What's wrong with current file manager? It's not working?
Click to expand...
Click to collapse
Oh is there already exist
sorry i haven't check it. This is my first device that using TWRP recovery
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Disclaimer:
LineageOS (Lineage Android Distribution) members or anyone else on this website is not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in the products you find here before flashing it! YOU are choosing to make these modifications, and if you point the finger at us for messing up your device, we will laugh at you. Your warranty will be void if you tamper with any part of your device / software.
I would like it to be known that I am only the OP. None of this would be possible if it were not for @bbelos! A HUGE thank you and shout out to him!
Download Links:
ROM
OpenGApps
TWRP
Root Add-on
Official LineageOS Changelog
Installation:
1 - Unlock bootloader via fastboot
2 - Flash TWRP
2.5 - Backup your device!
3 - Download Rom
4 - Place Rom and Gapps on internal or external storage
5 - Flash Rom via TWRP
Original Development Discussion Thread
Bugs:
Time reverts to 1970 when wifi is off during reboot - Fixed!
You tell us
Source Code
LineageOS
Device Tree
Vendor
Kernel
XDA: DevDB Information
LineageOS, ROM for Lenovo TB-X103F
Contributors:
bbelos
LineageOS Team
Version Information: Beta
Bootloader Unlock
Instructions for unlocking bootloader can be found here
Thank you @20tibby_gt06 for these instructions
TWRP Installation
1 - Download TWRP
2 - Reboot into boootloader mode
Code:
adb reboot bootloader
3 - Check to see if fastboot mode is working
Code:
adb fastboot devices
4 - Change working directory in terminal to your Downloads folder (or whatever folder TWRP is located)
Code:
cd Downloads
5 - Then type:
Code:
fastboot flash recovery recovery.img
Replace "recovery.img" with the name of your file (I always change mine to recovery.img for less typing in the terminal)
For reasons unknown to me, some people have reported a successful flash with this method but TWRP ends out being non-existent when rebooting to recovery. If this is the case for you try this:
1 - Follow steps 1-4 above
2 - Enter this command instead for step 5:
Code:
fastboot boot recovery.img
This will temporarily boot TWRP onto your device allowing you to flash the needed files to boot LineageOS
Reserved #2
Which Gapps works best?
Yakuman said:
Which Gapps works best?
Click to expand...
Click to collapse
I use opengapps arm 7.1 pico. The package size however is up to you
Could the OP add the following tags?
Code:
lenovo, tb-x103f, za1u0000us
The idea is to make it easy to find with information from the tablet itself. Thanks!
bornagainpenguin said:
Could the OP add the following tags?
The idea is to make it easy to find with information from the tablet itself. Thanks!
Click to expand...
Click to collapse
I tried to edit to add tags and I couldn't seem to do it. This is my first thread so I may be missing something
Edit: got it!
This is awesome. Thanks guys!
Quick question. I know own I shouldn't dirty flash but if I do will it keep the encryption in my external SD?
I use it as internal so I don't want to have to go through setting it all up again!
Will back it up anyway just in case
ownjoouk said:
This is awesome. Thanks guys!
Quick question. I know own I shouldn't dirty flash but if I do will it keep the encryption in my external SD?
I use it as internal so I don't want to have to go through setting it all up again!
Will back it up anyway just in case
Click to expand...
Click to collapse
I am unfortunately unfamiliar with encrypted storage, so you will have to tell us!
GartimusPrime said:
I am unfortunately unfamiliar with encrypted storage, so you will have to tell us!
Click to expand...
Click to collapse
Will give it a go later when I get home from work. Baptism of fire!!!!!
---------- Post added at 12:33 PM ---------- Previous post was at 12:16 PM ----------
Also another random question. I find the WiFi in the other lineage rom to be slow.
This to me isn't a deal breaker as the performance difference overall is so much better but it would be interesting to know other people thoughts and if you think it is quicker in this new ROM.
For example I tried remote play and it's a laggy mess and downloading from the play store seems to take much longer than all my other devices.
fastboot twrp install wont work
as stated i cant for the life of me get TWRP to install! CMD fastboot install says its complete but when i boot into recovery i get the standard recovery menu! A step by step guide would be helpfull! Thanks!
EsRgood4u said:
as stated i cant for the life of me get TWRP to install! CMD fastboot install says its complete but when i boot into recovery i get the standard recovery menu! A step by step guide would be helpfull! Thanks!
Click to expand...
Click to collapse
I will work on a tutorial this evening for everyone for unlocking bootloader and installing twrp. It will be in post 2
One thing for now for you to try is instead of doing fastboot flash recovery recovery.img try fastboot boot recovery.img. that will temporarily boot it allowing you to flash the ROM, Gapps and root if you choose.
GartimusPrime said:
I will work on a tutorial this evening for everyone for unlocking bootloader and installing twrp. It will be in post 2
One thing for now for you to try is instead of doing fastboot flash recovery recovery.img try fastboot boot recovery.img. that will temporarily boot it allowing you to flash the ROM, Gapps and root if you choose.
Click to expand...
Click to collapse
Thank you GartimusPrime! Ill give it a go and report back if i succeed!
Ok encrypted sd caused me no end of issues so did a full wipe.
First bug I have got is in the camera. Keeps asking for sd to be inserted even though storage permission enabled.
ownjoouk said:
Ok encrypted sd caused me no end of issues so did a full wipe.
First bug I have got is in the camera. Keeps asking for sd to be inserted even though storage permission enabled.
Click to expand...
Click to collapse
That's strange, camera works great for me. Can you post logs?
Something is wrong. Magisk won't write to sd.
Log collector can't get access to collect the log.
Not sure what's going on!!
EDIT: Sorted it. It was because I had used external sd as internal. For some reason even after a full wipe it was looking for it. I had to tell it to forget it and now all is well.
EsRgood4u said:
as stated i cant for the life of me get TWRP to install! CMD fastboot install says its complete but when i boot into recovery i get the standard recovery menu! A step by step guide would be helpfull! Thanks!
Click to expand...
Click to collapse
Tutorial updated in post #2. Let me know if I left anything out!
ownjoouk said:
Something is wrong. Magisk won't write to sd.
Log collector can't get access to collect the log.
Not sure what's going on!!
Click to expand...
Click to collapse
Hmm I am unfamiliar with Magisk so this may be a tough one
GartimusPrime said:
Hmm I am unfamiliar with Magisk so this may be a tough one
Click to expand...
Click to collapse
It's ok. I edited my post. All is well now.
Magisk is systemless root.
---------- Post added at 11:34 PM ---------- Previous post was at 10:38 PM ----------
A lot of my daughters games fail to load on this rom. For now I will be returning to linage mm.
Getting a few tantrums!!
Installed tom using the 2nd method
I managed to install your ROM using the temp twrp install method! Enabled root within rom settings! Installed flashify and gave it root permission then I was able to flash twrp.img permanently via flashify! Rom is lightning fast compared to the stock ROM! WiFi not as fast but I can live with that! Screencast doesn't find my Philips TV but other casting apps find it fine! Excellent ROM! Congratulations to the developer
Finally I Get Root On S6 Verizon with nougat :laugh: :laugh:
Edit For those didn't work with them use this
https://forum.xda-developers.com/ve...al/rom-offical-nougat-pre-rooted-rom-t3718155
There Is a Proof In Attachments
My Rom DQD1
*Do It AT YOUR OWN RISK!* I am not responsible for ANY damage to your device
Edit :
A Video Proof And How To Do
In Description Of Video I add link to my rom
To Root You Will Need The Following Files :
G920V_ENG_ROOT_B4_ 7.0 , Root Files and Odin In The Attachments
First Extract G920V_ENG_ROOT_B4_ 7.zip
Flash G920V_ENG_ROOT_B4_ 7.0.tar with odin in AP
After Reboot make Sure You enabled usb debugging go to Settings and tap on About Phone. Tab Software Info Find the Build Number and tap on it 7 times to enable Developer Options.
Now enter Developer Options and find USB Debugging. Enable it
Plug Your Device To Pc
Now Extract S6Root_Unroot_SU_2_79.zip
Plug your phone into the computer
Enter The Folder S6Root_Unroot_SU_2_79 And Double Click On root.bat
If this is your first time running ADB, you will see a prompt on your phone asking you to authorize a connection with the computer. Grant it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
wait for minute your phone will reboot automatically
Your Phone Will reboot 2 time on 3 will boot
Every Time You will reboot your device it will reboot 2 time on 3 will boot because we have loocked bootloader
Dont Forget To hit Thanks Button
sorry For My Bad English
where is the proofs?
Dude.... and, where is the proofs? Wich nougat version did you use? Some screenshot? I dont know but a root for this phone sounds really amazing and surprising.
NerdTronik said:
Dude.... and, where is the proofs? Wich nougat version did you use? Some screenshot? I dont know but a root for this phone sounds really amazing and surprising.
Click to expand...
Click to collapse
You Are Right I will Post ScreenShot
NerdTronik said:
Dude.... and, where is the proofs? Wich nougat version did you use? Some screenshot? I dont know but a root for this phone sounds really amazing and surprising.
Click to expand...
Click to collapse
I Added Proof In Attachments Check them
Ok, I have a problem with the adb, I tried many times but it still freezing and my cellphone screen too, I searched in the internet many ways to mount the system partition as read and write but all failed. Im thinking that the problem is the nougat version, I have the J1 and Im downloading the D1. Pst, the drivers and the cables are ok, I used another adb codes and they worked.
Seems like it only works on Qd1, so if have updated QI1 or QJ1, got to flash back to Qd1 to get it to work
...
I flashed DQD1 via Odin and after that, I flashed the .tar, but it still freezing my screen, I tried first without flashing the .tar because after flashing the firmware, the custom logo appeared. But again, the adb process failed, itsn freezed like the other but was unable to copy the su.img
---------- Post added at 07:06 PM ---------- Previous post was at 06:13 PM ----------
I did the same process that you made, so, I don't know why this happen, can you please assist this?? The phone doesn't matter, I just want to prove if this really work. I'll be amazed if this really do.
I´m facing the same problem on my device as @NerdTronik , just frezes when try to remount system as rewritable.. No succes as yet and I'm on Qd1 with the same kernel version.. Dont know How you Got to succesfully Remounted the system..
Another one stuck scratching my head with the phone locking when the batch script gets to the first adb shell mount command. The flash to DQD1 (from here, all 4 files) went fine. Flashed the new boot image without issue, reboot reflects custom image. Enabled debugging, connected with ADB, but that mount would be the final thing that would occur. Hoping this is just something we need clarified in the instructions.
Ok for all of your problem tonight i will make a youtube video learn how to root with the proof of it ☺?
Thanks for the root! Tell me, after I get the root of what custom firmware I can put? I understand you only need the development of verizon?
I did a Google for the the boot image file name and came across this link:
http://www.techzai.com/eng-root-file-samsung-android-7-nougat/
NOTE: I accessed this via Google's cache, and with NoScript plugin in Firefox. The firewall I was accessing through blocked the site for a reason... unsure if that could be that it isn't safe, work just didn't want me going there during business, etc. Go at your own risk.
But one thing that was noted in those instructions was to not only enable USB Debugging, but to also enable OEM Unlock in the developer options.
The thread for the S7 (which I think would apply but we just need to use the later released S6 boot image) mentions disabling secure startup. https://forum.xda-developers.com/ve...-to-notes-root-install-xposed-unroot-t3411039
Might have time to play around with this more during the coming weekend, but maybe @faw_wal or another member will get additional info before then.
Don't work in my phone
So has any one else been able to confirm this as a working method?
DonaldAnderson said:
So has any one else been able to confirm this as a working method?
Click to expand...
Click to collapse
@DonaldAnderson
I was made a video about method but from begin when i flash the reactivation lock was on and now it's locked if you want a video with a proof i can post it for you and tomorrow i will post the full video do you want a proof video now ?
faw_wal said:
Finally I Get Root On S6 Verizon with nougat :laugh: :laugh:
There Is a Proof In Attachments
My Rom DQD1
*Do It AT YOUR OWN RISK!* I am not responsible for ANY damage to your device
To Root You Will Need The Following Files :
G920V_ENG_ROOT_B4_ 7.0 , Root Files and Odin In The Attachments
First Extract G920V_ENG_ROOT_B4_ 7.zip
Flash G920V_ENG_ROOT_B4_ 7.0.tar with odin in AP
After Reboot make Sure You enabled usb debugging go to Settings and tap on About Phone. Tab Software Info Find the Build Number and tap on it 7 times to enable Developer Options.
Now enter Developer Options and find USB Debugging. Enable it
Plug Your Device To Pc
Now Extract S6Root_Unroot_SU_2_79.zip
Plug your phone into the computer
Enter The Folder S6Root_Unroot_SU_2_79 And Double Click On root.bat
If this is your first time running ADB, you will see a prompt on your phone asking you to authorize a connection with the computer. Grant it.
wait for minute your phone will reboot automatically
Your Phone Will reboot 2 time on 3 will boot
Every Time You will reboot your device it will reboot 2 time on 3 will boot because we have loocked bootloader
Dont Forget To hit Thanks Button
sorry For My Bad English
Click to expand...
Click to collapse
Don't you think your omitting a step??, we all follow each step you pointed in the instructions and got the same problem, devices just freezes when execute the root.bat
faw_wal said:
@DonaldAnderson
I was made a video about method but from begin when i flash the reactivation lock was on and now it's locked if you want a video with a proof i can post it for you and tomorrow i will post the full video do you want a proof video now ?
Click to expand...
Click to collapse
I think that it will be nice, I'll be waiting for it in a few hours. We just want to solve the errors, exactly the mounting system partition process.
can you tell me how to do that? when i double click root.bat my homegreen freezy?
can you tell me how to do that? when i double click root.bat my homegreen freezy
motorec said:
Thanks for the root! Tell me, after I get the root of what custom firmware I can put? I understand you only need the development of verizon?
Click to expand...
Click to collapse
I was doing a research and found this thread with the same problem as us ,seems like its knox that blocking the system remount.https://forum.xda-developers.com/att-galaxy-s6/general/root-att-samsung-g920a-s6-g925a-s7edge-t3564637
DDwhite said:
I was doing a research and found this thread with the same problem as us ,seems like its knox that blocking the system remount.https://forum.xda-developers.com/at...ot-att-samsung-g920a-s6-g925a-s7edge-t3564637
Click to expand...
Click to collapse
Oh nice, it's just seems impossible until somebody find the method to write in the system partition, in the thread you posted here, there was a man saying that we need to flash or do something before run root.bat, he didn't checked before but, sounds like a development.
http://rootjunkysdl.com/files/?dir=Gates/DeBloater
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclamer
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
WARNING: The stock boot image has dm-verity, which prevents you from booting if you swipe to enable system modifications!
SOLUTION: Flash a root such as SuperSU or phh-superuser. You can also flash no-verity-opt-encrypt.zip.
Prerequisites :
YOUR BOOTLOADER MUST BE UNLOCKED
How to unlock the bootloader :
1-enable oem unlock in the developer settings
2-reboot to fastboot [adb reboot bootloader] then issue this command [fastboot oem unlock]
note: this will wipe your data]
Click to expand...
Click to collapse
-If you have problems with the device drivers installed , you will need to install lg bridge, you can download it from here:
http://tool.lime.gdms.lge.com/dn/downloader.dev?fileKey=PWZO7A26B9UW
How to flash Twrp:
BOOT INTO FASTBOOT MODE:
With your phone off, connect your usb cable to your phone while holding VOLUME DOWN to boot into fastboot mode or just type [adb reboot bootloader] in the adb terminal
ONCE YOU ARE IN FASTBOOT MODE:
Open a command prompt and type "fastboot flash recovery <path_to_recovery.img>” without the quotation marks.
Example: fastboot flash recovery C:/Users/John/Desktop/recovery.img
[don't forget to extract the downloaded recovery zip to get the recovery.img]
WHEN THE FLASH COMPLETES: (Takes about 2 seconds)
On your phone, unplug the usb cable and power it off by taking out the battery and putting it back in.
BOOT INTO RECOVERY MODE FOR THE FIRST TIME
HOLD VOLUME DOWN + POWER until you see the LG logo and then temporarily release the POWER button, immediately pressing and holding it back down until you see the white prompt [factory reset] screen. You will NEVER release the volume down button in this process!
Use the hard keys to select "YES" and then "YES" again to boot into TWRP
How to Disable encryption and flash super su [Install Root]:
1. In TWRP, go to Wipe > Format Data. Enter the keyword ‘yes‘, in the provided space and enter. This will wipe the automatically encrypted filesystem, and decrypt it.
2. Once the wiping is done, reboot back into recovery. Go to Reboot > Recovery.
3. When the recovery boots again, connect your phone to the PC and Enable MTP under the Mount section.
4. Transfer the downloaded ‘no-verity-opt-encrypt-**.zip’ and ‘SR1-SuperSU-v2.78-SR1-20160915123031.zip to your internal storage or EXTSD
5. Disconnect the device now.
6. Tap on Install. Now, navigate your phone’s storage and select ‘no-verity-opt-encrypt-**.zip’. Finally swipe the ‘Swipe to confirm Flash’ button on the bottom of the screen.
7. The flashing process will merely take a few seconds. And when it’s done, follow the same method to flash the root package – SR1-SuperSU-v2.78-SR1-20160915123031.zip [/B]
Wait 1 or 2 minutes after the zip files are done flashing then reboot system and PROFIT! Your phone may take 3-5 minutes to boot the first time and it might boot-loop once or twice at the Metro PCS splash screen but don’t worry this is expected.
Click to expand...
Click to collapse
Downloads :
#1
https://www.mediafire.com/download/uxquk880q8pkurl
Additional Downloads :
SuperSU stable by Chainfire
dm-verity and force encryption disabler
Notice: After the TWRP splash screen you will see the option to type in the password to decrypt the filesystem just ignore it and press the cancel button.
Credits :
TeamWin, Me
Please hit the thanks button and conider to donate if you appreciate my work :highfive:
Paypal donation link: https://paypal.me/messi2050
What version of TWRP is this
brad2192 said:
What version of TWRP is this
Click to expand...
Click to collapse
Same as aristo 1
So, you made it from what source?
brad2192 said:
So, you made it from what source?
Click to expand...
Click to collapse
Are you investigating me :laugh: , ported it from my aristo 1 recovery.
messi2050 said:
Are you investigating me :laugh: , ported it from my aristo 1 recovery.
Click to expand...
Click to collapse
Just strange that a TWRP recovery just came out for the same device 2 hours previous to your post.
brad2192 said:
Just strange that a TWRP recovery just came out for the same device 2 hours previous to your post.
Click to expand...
Click to collapse
Ah actually is strange that the one you are talking about came directly after i posted on your topic saying I posted test twrp for aristo 2 on my blog (posted 4 days ago on my blog)
https://forum.xda-developers.com/showpost.php?p=75558782&postcount=16
https://messi2050.blogspot.com.eg
I was not aware of that friend, my apologies.
I'm having an issue, Instagram Twitter and Facebook refuse to update after using magisk, so I switched to SuperSU and I still have the same problem. The only way to get it to work is to remove root. I can't even connect to them through the browser it keeps saying failed to uodate
KyleBryant said:
I'm having an issue, Instagram Twitter and Facebook refuse to update after using magisk, so I switched to SuperSU and I still have the same problem. The only way to get it to work is to remove root. I can't even connect to them through the browser it keeps saying failed to uodate
Click to expand...
Click to collapse
That's probably because of adblock or similar sw
Tried it again no adblock and then google play services kept crashing I couldn't even add my account
Fixed it, forgot I had removed chrome and that was the issue for some reason
when i try to flash twrp i get the response "error can not load" plz. help
ive been having trouble flashing a rom to the aristo 2 because of the buildprop device values being incorrect. how can this be fixed?
messi2050 said:
Same as aristo 1
Click to expand...
Click to collapse
3.0.3.0
Trying this, I get an error "Failed to mount '/data' (No such device)"
tge101 said:
Trying this, I get an error "Failed to mount '/data' (No such device)"
Click to expand...
Click to collapse
Sounds like your partition table is hosed, brother.
Follow this post to restore your phone:
https://forum.xda-developers.com/showpost.php?p=76799751&postcount=91
tecknight said:
Sounds like your partition table is hosed, brother.
Follow this post to restore your phone:
https://forum.xda-developers.com/showpost.php?p=76799751&postcount=91
Click to expand...
Click to collapse
I got it restored eventually but im still having the same issur that made me try a factory reset in the first place. Half the time, i need to reboot for my phone to charge and some of those times the notifications that its charging and that debug is on stay in the status bar. Im at my wits end.
I just grabbed an Aristo 2 and though I don't know how long I'll have it, in my free time ( which is limited ) I'm going to be working on getting a full rom package with kernel compiled. What would you guys like to see? I primarily focus on flagships, and this is definitely a budget device but it's been working well for me despite the snapdragon 425 and only 2gb ram...I'd like to see some development for this thing and though I've only spent about 20 minutes looking around on xda it seems it's very limited (which is to be expected)...Can someone give me a brief rundown on where we are with the device and what yet needs accomplished to be ready for a compile? Are sources available (kernel source, etc)? I thought I read back in another post (messi2050?) that some sources had been obtained? I'm going to go back over it and see what else is needed....do we have defconfig and whatnot to build? Any info you guys can paraphrase will make this all a lot faster since I've got very limited time to research but access to a poweredge r330 blade with 32GB and a 3.4ghz octa to compile on....I've already set up the VM with linux and am waiting to see what else I find that I'm going to need and decide on a build (lineage, cm, stock rooted, etc) before I take the time to download android source....I've only got a 50mbps line coming into the server so a 40gb source download isn't exactly fast and I work construction so I'm in and out but never seem to have EXTENDED periods of time to sit down and burn the keyboard up....
Thanks guys....I'm about to install Tapatalk on the device and I'll be out-n-about checking on jobs in the field but if anyone wants to DM me and bring me up to speed I'll be sure to reply....In the meantime as time allows I can remote the server at the office if need be....
-Rx8driver
I've also noticed that driver issues are pretty noticeable using win10 in fastboot mode...i had to load the Google driver manually to get fastboot mode working... if you're having issues take a close look thru the device manager and make sure the lg driver is properly loaded when the device is in fastboot and download modes if you're running win10...
Sent from my LM-X210(G) using Tapatalk
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Team Win Recovery Project (TWRP), is an open-source software custom recovery image for Android-based devices.It provides a touchscreen-enabled interface which allows users to install third-party firmware and backup the current system, which are often unsupported by stock recovery images.It is, therefore, often installed when rooting Android devices.
What's new in 3.2.1-0:
* minui fixes (cryptomilk)
* Better android-8.0 compatibility in ROM trees (Dees_Troy)
* Fix missing library in android-8.0 (nkk71)
* Fix inconsistent SDCard naming (DevUt)
* Default to TWRP restore instead of adb backup restore to fix restore on fresh TWRP boot.
Downloads:
TWRP For J7 Plus
Installation:
•In your ROM, go to Settings -> About device. Tap 7 times on Build number to enable Developer options.
•Now go to Settings -> Developer options. (above About device).
•You need to enable OEM unlock, otherwise you might end up with boot problems or be unable to flash later on.
•Extract Odin_3.10.7.zip to your computer.
•Install Samsung Mobile Phone Drivers for Odin to find your device.
•Download .tar image of TWRP For J7 Plus.
•Reboot your device into Download mode. To do this, select reboot from the power menu and hold the [Volume Down] + [Home] buttons while your device reboots.
•Once you reach the Download mode warning screen, press [Volume Up] to continue.
•Open Odin and place that TWRP tar file in the [AP] slot without touching any other options, then press [Start].
•Hold [Volume Up] + [Home] buttons near the end of the flash, and keep holding them until you are in recovery.
To disable forced encryption and mount internal storage(/DATA):
(Note this MUST be flashed after SuperSU if you intend to root)
1. Boot to TWRP
2. Format Data partition using FORMAT DATA button under Wipe options.
(Note: This will wipe the internal storage)
3. Check DATA is mountable.
4. Install SuperSU (if root is required)
5. Install Boot Image Patch below.
6. Reboot
Boot Image Patch
No_DM_Verity_Patcher_By-ashyx
Hit Thanks If You Like It! :good:
XDA:DevDB Information
TWRP 3.2.1-0 For J7 Plus, Tool/Utility for the Android General
Contributors
Albe96
Source Code: https://github.com/Albe96XDA/android_device_samsung_jadelte-TWRP
Version Information
Status: Alpha
Created 2018-06-20
Last Updated 2018-06-25
Reserved
Reserved#2
Thank you so much
I had been waiting years for a TWRP for J7 Plus. Thank you so much. idk if this works or not but I will give it a shot once I reach home. Thanks again. Btw how do i use the verity patcher?
Recreation01 said:
I had been waiting years for a TWRP for J7 Plus. Thank you so much. idk if this works or not but I will give it a shot once I reach home. Thanks again. Btw how do i use the verity patcher?
Click to expand...
Click to collapse
Flash it from TWRP.
Albe96 said:
Flash it from TWRP.
Click to expand...
Click to collapse
thanks, it works perfectly! I hope more users can notice this.
Recreation01 said:
thanks, it works perfectly! I hope more users can notice this.
Click to expand...
Click to collapse
WOW.Maybe PM me with some screenshots! ? Glad to know
Questions
1. Do we still need to reflash the boot image after booting to twrp again to avoid encryption?
2. Where do we need to put the boot img and magisk/superSU files if we're going to wipe the data, won't that be deleted as well hence with the internal storage?
3. Lastly, will the sd card be read? Because in the other twrps I've tried both internal and extsd will not read or not mountable.
Hope you'll respond ASAP
Thank you
PreferableBird69 said:
1. Do we still need to reflash the boot image after booting to twrp again to avoid encryption?
2. Where do we need to put the boot img and magisk/superSU files if we're going to wipe the data, won't that be deleted as well hence with the internal storage?
3. Lastly, will the sd card be read? Because in the other twrps I've tried both internal and extsd will not read or not mountable.
Hope you'll respond ASAP
Thank you
Click to expand...
Click to collapse
Did you flash no verity boot image patch after flashing twrp and before booting back to rom? You gotta flash that.
Albe96 said:
Did you flash no verity boot image patch after flashing twrp and before booting back to rom? You gotta flash that.
Click to expand...
Click to collapse
I haven't tried it yet as I'm still not sure of the outcome of it. So what you're saying is that flash no verity first before fomatting the data?
PreferableBird69 said:
I haven't tried it yet as I'm still not sure of the outcome of it. So what you're saying is that flash no verity first before fomatting the data?
Click to expand...
Click to collapse
Just flash the no verity zip.then reboot the device.Then you're good to go what you want to do
PreferableBird69 said:
1. Do we still need to reflash the boot image after booting to twrp again to avoid encryption?
2. Where do we need to put the boot img and magisk/superSU files if we're going to wipe the data, won't that be deleted as well hence with the internal storage?
3. Lastly, will the sd card be read? Because in the other twrps I've tried both internal and extsd will not read or not mountable.
Hope you'll respond ASAP
Thank you
Click to expand...
Click to collapse
1. No
2/3. SD Card can be read but I can't mount it on a USB. You might want to backup all your data.
---------- Post added at 12:09 PM ---------- Previous post was at 12:08 PM ----------
Btw can you develop roms for this device? I am sure many of us will be hype
Recreation01 said:
1. No
2/3. SD Card can be read but I can't mount it on a USB. You might want to backup all your data.
---------- Post added at 12:09 PM ---------- Previous post was at 12:08 PM ----------
Btw can you develop roms for this device? I am sure many of us will be hype
Click to expand...
Click to collapse
First off all I wanna know if TWRP is working or not? Secondly I don't own this device to work for it either I can but you have to provide logs(will be irritable).And I don't see many people for whom I can work.I mean these days,nobody like mediatek chipset devices...
Maybe you didn't set RW permission that's why USB can't mount ?
Okayyy thank you very much for the immediate responses guys highly appreciated:victory:
Hey guys any update from the official twrp of this device?
PreferableBird69 said:
Hey guys any update from the official twrp of this device?
Click to expand...
Click to collapse
LMAO No.This device us not official to TWRP yet
Albe96 said:
LMAO No.This device us not official to TWRP yet
Click to expand...
Click to collapse
Y though
PreferableBird69 said:
Y though
Click to expand...
Click to collapse
Because the device isn't popular I guess
Hey so i tried flashing it and still my sd card won't be read sigh
PreferableBird69 said:
Hey so i tried flashing it and still my sd card won't be read sigh
Click to expand...
Click to collapse
Did you flash the dmverity patch?