Related
I have been compiling the cm7 source and sharing. Gapps and rom boots and work. It is more basic gingerbread aosp then cm7. Cyanogen and teamdouche have been working to get this together and this is more kinda like a nightly
www.crackflashers.com
You will need to flash the new recovery.img to flash/get working gapps.
after flashing gapps, run fix permissions to get gapps to work.
This is cause of cm7 going to ext4 based system unlike older roms that are ext3
The new recovery does make it so you can not use older pre gingerbread roms so find a older recovery to fastboot back to anything like froyo or restore old backups
Sent from my HTC Vision using XDA App
Apn might be missing if you can not connect to data. You can find a apn list here at the end of the op http://forum.xda-developers.com/showthread.php?t=892808
Guide to flashing on emmc devices (vision,ace, glacier) change vision to ace for this
http://forum.xda-developers.com/showthread.php?t=909714
So this does not include gapps?
Do you know when cwmr 3.0 will be avail in rom manager?
nandihno said:
So this does not include gapps?
Do you know when cwmr 3.0 will be avail in rom manager?
Click to expand...
Click to collapse
The gapps are posted on on that link also not built in, building in causes bootloops. Don't have any clue when it will be in rom manager, the one uploaded is the recovery.img built with the source
Sent from my HTC Vision using XDA App
so how is this compile compared to kali's release?
Omg more roms to flash. Cheers buddy.
hehe m0x your getting busy
maybe you should start up a review site lets us know whats good and bad
capychimp said:
so how is this compile compared to kali's release?
Click to expand...
Click to collapse
Yea i want to know the same thing, as kalis version has gapps bundle into it.which i think is a better solution given that cam 3 i not out in rmom manage yet
Am guessing video is not yrt supported right ?
nandihno said:
Yea i want to know the same thing, as kalis version has gapps bundle into it.which i think is a better solution given that cam 3 i not out in rmom manage yet
Am guessing video is not yrt supported right ?
Click to expand...
Click to collapse
I don't know cali's version. I just posted it cause I built it for someone else and he confirmed working. It is repo synced from the cm7 gingerbread source at about 7pm.
I don't have a desire hd so I can not confirm what is or isn't working
Sent from my HTC Vision using XDA App
nandihno said:
Yea i want to know the same thing, as kalis version has gapps bundle into it.which i think is a better solution given that cam 3 i not out in rmom manage yet
Am guessing video is not yrt supported right ?
Click to expand...
Click to collapse
The first RC0 version that was posted wasn't built by kali-
Anyone tired this ?
mero01 said:
Anyone tired this ?
Click to expand...
Click to collapse
Its slightly more advanced along in development than the other version. ADW is now the default launcher. Haven't noticed any difference apart from that.
dr.m0x said:
Its slightly more advanced along in development than the other version. ADW is now the default launcher. Haven't noticed any difference apart from that.
Click to expand...
Click to collapse
seem more stable ?
mero01 said:
seem more stable ?
Click to expand...
Click to collapse
Really it seems the same. Looking good.
dr.m0x said:
Really it seems the same. Looking good.
Click to expand...
Click to collapse
so how did u flash the gapps? via cwm recovery 3.0? or is there another way..
if there is no other way i preffer to wait till rom manager has cwm 3.0...makes things easier and safer
also ..is video camera still not working?
I have just flashed this new Rom using cmw 3.
I had to manually configure my apn.
The video-camera is still not working...
But beside this it is looking good!
Ok, it's not usable for me because i cann't get the network to work
New version up guys.
dr.m0x said:
New version up guys.
Click to expand...
Click to collapse
Where do you find that? Followed the link in first post and its just the same as before. Can you share a link maybe
How do you flash img file normally do it by zip?
HTC HERO - HTC HD2 - NOW HTC DESIRE HD & SAMSUNG GALAXY S Bring on the modding.
nickwarn said:
Where do you find that? Followed the link in first post and its just the same as before. Can you share a link maybe
Click to expand...
Click to collapse
I meant new version since thread started. The 11.30am version. Sorry for any confusion.
Sent by the air.
Anyone tried Bluetooth with this build?
I cant get pairing with my car working with any cyan build yet ...
Just wanted to know if anyone tested this yet
Thx ahead
Sent from my Desire HD using XDA App
Hi! I have ParanoidAndroid Rom v4.6. It works almost perfect, the only one problem is that the video recording doesn't works.
I did a nandroid, flashed v11 and I could't login with the google account, so I came back to v4.6 with nandroid.
When released v12 I flashed it and I can't login with google again.
Why is the reason to don't include that posibility?
(I don't flash GAPPS cause I think there are included with the rom)
enoler said:
Hi! I have ParanoidAndroid Rom v4.6. It works almost perfect, the only one problem is that the video recording doesn't works.
I did a nandroid, flashed v11 and I could't login with the google account, so I came back to v4.6 with nandroid.
When released v12 I flashed it and I can't login with google again.
Why is the reason to don't include that posibility?
(I don't flash GAPPS cause I think there are included with the rom)
Click to expand...
Click to collapse
Hi,
You need to install Gapps.
malybru said:
Hi,
You need to install Gapps.
Click to expand...
Click to collapse
But, the gapps aren't included on the rom? For example on the last versions, are included 4.2 camera, gallery... if i flash Gapps, i overwritte it?
enoler said:
But, the gapps aren't included on the rom? For example on the last versions, are included 4.2 camera, gallery... if i flash Gapps, i overwritte it?
Click to expand...
Click to collapse
Hi,
Gapps = Google apps (like gmail,play store,etc,)
Not camera
Yes I'm running paranoid Android too and you need to flash gaaps, then those things will be added. You can flash 4.2 gaaps. That's the one I flashed. You can find it on Draguns web site under downloads . Look on page one carefully and follow the link. Then you will be all set! Everything is running perfectly. You will be fine after you flash Gaaps. You have two choices regular Gaaps or inverted Gaaps. Hope this helps. Best wishes.
Also no it won't over write, the camera.
Sent from my HTC Sensation using xda premium
Google apps are all the apps that connect to Google's servers.
Thank you all of you!
Hi guys I'm new to this phone
it is actually Korean version Model: Nexus S M200k
android version 4.0.3 (ICS)
Build number IML74K
i need update my device to Official 4.1 (JB)
how can I do it? there are no update option in Settings
re:
asmOne said:
Hi guys I'm new to this phone
it is actually Korean version Model: Nexus S M200k
android version 4.0.3 (ICS)
Build number IML74K
i need update my device to Official 4.1 (JB)
how can I do it? there are no update option in Settings
Click to expand...
Click to collapse
I have the same model as yours..... Go to settings -> the very last tab (phone settings) => system updates => refresh......... w8 and a pop up will appear accept and you will be on 4.1.1 after a short 144mb download!
PS: I would recommend you to stay at ICS because 4.1.1 does not posses many features however it will eat ur ram like hell on average u would have 70-100mb free....... and games will lag a lot!
Like if this was helpful
Nexus_Lord said:
I have the same model as yours..... Go to settings -> the very last tab (phone settings) => system updates => refresh......... w8 and a pop up will appear accept and you will be on 4.1.1 after a short 144mb download!
PS: I would recommend you to stay at ICS because 4.1.1 does not posses many features however it will eat ur ram like hell on average u would have 70-100mb free....... and games will lag a lot!
Like if this was helpful
Click to expand...
Click to collapse
Thanks for responding Nexus_Lord.
that is the point there are NO UPDATE OPTION in my phone.
i attached screen snaps check it out.. :good:
asmOne said:
Thanks for responding Nexus_Lord.
that is the point there are NO UPDATE OPTION in my phone.
i attached screen snaps check it out.. :good:
Click to expand...
Click to collapse
It looks like you're using a custom ROM so the update option isn't showing up. You must be on stock ICS to take the OTA update to JB.
asmOne said:
Thanks for responding Nexus_Lord.
that is the point there are NO UPDATE OPTION in my phone.
i attached screen snaps check it out.. :good:
Click to expand...
Click to collapse
You are on AOKP ROM and not custom ROM.
You can install Stock OS using factory images
OR
Install custom ROMs like CyanogenMod, AOKP or SlimBean (Personal favorite).
You'll find the tutorials in the development thread.
smit.sanghavi said:
You are on AOKP ROM and not custom ROM.
You can install Stock OS using factory images
OR
Install custom ROMs like CyanogenMod, AOKP or SlimBean (Personal favorite).
You'll find the tutorials in the development thread.
Click to expand...
Click to collapse
Thanks for respondin smit.
I need to install a JB rom without any Bug what is your recommend for me?
asmOne said:
Thanks for respondin smit.
I need to install a JB rom without any Bug what is your recommend for me?
Click to expand...
Click to collapse
Even official android has some bugs. The closest to bug-free JB rom I used was Strawberry ROM coupled with matr1x kernel.
asmOne said:
Thanks for respondin smit.
I need to install a JB rom without any Bug what is your recommend for me?
Click to expand...
Click to collapse
There is no Custom ROM without any bugs. Even stock ROMs will have some bugs.
The reliable custom ROMs are CyanogenMod, AOKP, SlimBean etc etc
You can choose any of them and I'm sure you'll not be disappointed.
smit.sanghavi said:
There is no Custom ROM without any bugs. Even stock ROMs will have some bugs.
The reliable custom ROMs are CyanogenMod, AOKP, SlimBean etc etc
You can choose any of them and I'm sure you'll not be disappointed.
Click to expand...
Click to collapse
This Nexus s is my daily device and I'm using this for my Official works. as always as I'm dealing with my device and this rom is somewhat Slow oftenly it shows Force close message.
please give me your opinion as your experience which rom is the most Suitable for a Daily device. (nexus S)
asmOne said:
This Nexus s is my daily device and I'm using this for my Official works. as always as I'm dealing with my device and this rom is somewhat Slow oftenly it shows Force close message.
please give me your opinion as your experience which rom is the most Suitable for a Daily device. (nexus S)
Click to expand...
Click to collapse
So far this is the most stable rom i found for nexus s the latest release of AOSP JellyBean 4.1.2
But if you want something more up to date wait for the next release of AOSP KitKat it will be a great daily driver
asmOne said:
This Nexus s is my daily device and I'm using this for my Official works. as always as I'm dealing with my device and this rom is somewhat Slow oftenly it shows Force close message.
please give me your opinion as your experience which rom is the most Suitable for a Daily device. (nexus S)
Click to expand...
Click to collapse
SlimBean 4.1.2. Low on memory usage, stable and good features.
CataHd said:
So far this is the most stable rom i found for nexus s the latest release of AOSP JellyBean 4.1.2
But if you want something more up to date wait for the next release of AOSP KitKat it will be a great daily driver
Click to expand...
Click to collapse
I downloaded a 106.85 MB rom file but how to install it?
asmOne said:
I downloaded a 106.85 MB rom file but how to install it?
Click to expand...
Click to collapse
If you already have a custom rom on your device you already have a custom recovery on it
First step update it via rom manager from playstore or manually flash the latest one from here
Then go to recovery and
-Wipe Data Factory Reset
-Wipe Cash
-Advance Settings>Wipe dalvik cash
Then Install from recovery rom and gapps
-Reboot and then install Superuser for root
And final only if you need i added a filemanager in attachment that you can flash from recovery because the rom don't has one or you could download one from play store
CataHd said:
If you already have a custom rom on your device you already have a custom recovery on it
First step update it via rom manager from playstore or manually flash the latest one from here
Then go to recovery and
-Wipe Data Factory Reset
-Wipe Cash
-Advance Settings>Wipe dalvik cash
Then Install from recovery rom and gapps
-Reboot and then install Superuser for root
And final only if you need i added a filemanager in attachment that you can flash from recovery because the rom don't has one or you could download one from play store
Click to expand...
Click to collapse
Thanks a Lot i got it. just now installed Now I'm on now AOSP 4.1.2
asmOne said:
Thanks a Lot i got it. just now installed Now I'm on now AOSP 4.1.2
Click to expand...
Click to collapse
Also if you want even better performance you could try Air Kernel#350
It has more features than stock kernel and more free RAM
we got the same phone.
CataHd said:
Also if you want even better performance you could try Air Kernel#350
It has more features than stock kernel and more free RAM
Click to expand...
Click to collapse
I'm actually new to rooting android devices.
what is a KERNEL?
what can i have with a new Kernel? and How to install.
if i install a new kernel can it be break my device?
asmOne said:
I'm actually new to rooting android devices.
what is a KERNEL?
what can i have with a new Kernel? and How to install.
if i install a new kernel can it be break my device?
Click to expand...
Click to collapse
A kernel is the core of android but for more information just google it
To install just flash it like you flashed the rom and whipe cashe and dalvik
You will notice a better performance and also a better headphone sound thanks to voodoo sound mod(a kernel audio driver)
CataHd said:
A kernel is the core of android but for more information just google it
To install just flash it like you flashed the rom and whipe cashe and dalvik
You will notice a better performance and also a better headphone sound thanks to voodoo sound mod(a kernel audio driver)
Click to expand...
Click to collapse
Give me the best kernel you have used with installation instruction.
asmOne said:
Give me the best kernel you have used with installation instruction.
Click to expand...
Click to collapse
This one http://forum.xda-developers.com/showthread.php?t=1469842
Flash it in recovery and Wipe Cache and Dalvik Cache
Hey guys although I am not new to xda developers , I have certain doubt's regarding installing jbx kernel , I read the post by d trail and its little above the levels for an amateur . so p.s. help me in giving a guidance to install the kernel. I am using pacman 4.3 in sys1 and mokee 4.4.2 on sys3, he battery drain is too much in mokee gets down by 10% every hour so I want to try the kernel for power optimization....
Ahh... installing JBX kernel, this is an awesome procedure, thanks to AROMA installer, trust me, haha
Commonly we just use BMM to install the JBX.zip like installing a ROM.zip
But there're some exceptions.. for example: we can not flash JBX on non-kexec ROMs because of ICS kernel...
I think guide allready have on the jbx kernel thread
guruggk1988 said:
Hey guys although I am not new to xda developers , I have certain doubt's regarding installing jbx kernel , I read the post by d trail and its little above the levels for an amateur . so p.s. help me in giving a guidance to install the kernel. I am using pacman 4.3 in sys1 and mokee 4.4.2 on sys3, he battery drain is too much in mokee gets down by 10% every hour so I want to try the kernel for power optimization....
Click to expand...
Click to collapse
i think you have already installed BMM.
then take mokee 4.4.2 for example,
1. download the latest version of dtrail's kernal, or Shurikkb's (because it is verified that his kernal have better battery life, you can find in dtrail's post)
2. flash it like a ROM, (boot to BMM recovery, switch to system3, then install package from ..., no wipe, no clean)
3. then enjoy, for details, please read in the post
help
PhoenixNghi said:
Ahh... installing JBX kernel, this is an awesome procedure, thanks to AROMA installer, trust me, haha
Commonly we just use BMM to install the JBX.zip like installing a ROM.zip
But there're some exceptions.. for example: we can not flash JBX on non-kexec ROMs because of ICS kernel...
Click to expand...
Click to collapse
i read the faq's about the jbx kernel, i downloaded the jbx kernel installed it now, after that what should i do , i am unable to understand the procedure
guruggk1988 said:
i read the faq's about the jbx kernel, i downloaded the jbx kernel installed it now, after that what should i do , i am unable to understand the procedure
Click to expand...
Click to collapse
You did install it, right? So go to About and find Kernel version, you'll see JBX there
Issues with JBX 3.0
Hello,
I have another question regarding JBX. I am running the latest version of Gummy (M.1-02-19-14), which comes with JBX kernel already integrated. I have read good things about the latest version of JBX (02/27/14 build) and have been trying to install it over the old kernel. The times I manage to load the rom with the new kernel, I have no signal and the phone appears to be unable to recognize my sim card. I have tried unchecking the exposed framework and 10% battery fix in the installer without avail. Any help with installing this latest version of JBX would be greatly appreciated!
Hi, I'm relatively new here, I have many doubts about the JBX kernel. I do not understand the Aroma installer. Is there any option to dial in specific?
I have experienced some problems. Some sensors stopped working.
dguamache said:
Hi, I'm relatively new here, I have many doubts about the JBX kernel. I do not understand the Aroma installer. Is there any option to dial in specific?
I have experienced some problems. Some sensors stopped working.
Click to expand...
Click to collapse
just install the jbx kernel just like how you flash the kernel by going to recovery clicking on install zip from storage , you dont ahve to change anything in the kbx kernel everything works fine :good:
Hello_Motto said:
Hello,
I have another question regarding JBX. I am running the latest version of Gummy (M.1-02-19-14), which comes with JBX kernel already integrated. I have read good things about the latest version of JBX (02/27/14 build) and have been trying to install it over the old kernel. The times I manage to load the rom with the new kernel, I have no signal and the phone appears to be unable to recognize my sim card. I have tried unchecking the exposed framework and 10% battery fix in the installer without avail. Any help with installing this latest version of JBX would be greatly appreciated!
Click to expand...
Click to collapse
i guess u better stick to shurikkb 25/2 build , its awesone , even i faced issues with the 27/2 dtrail like no signal , but shruikkb is marvelous:good:
guruggk1988 said:
just install the jbx kernel just like how you flash the kernel by going to recovery clicking on install zip from storage , you dont ahve to change anything in the kbx kernel everything works fine :good:
Click to expand...
Click to collapse
Just click next til end?
dguamache said:
Just click next til end?
Click to expand...
Click to collapse
yep , if u want u can install the camera app moto x by ticking it and rest everything is same just go on clicking next:good:
guruggk1988 said:
yep , if u want u can install the camera app moto x by ticking it and rest everything is same just go on clicking next:good:
Click to expand...
Click to collapse
Thanks a lot!
I would like to know the specific meaning of each option, did a tutorial about the kernel?
dguamache said:
Thanks a lot!
I would like to know the specific meaning of each option, did a tutorial about the kernel?
Click to expand...
Click to collapse
Dude thats explained below the option..n there's a nice long thread about jbx kernel in the development section..
Sent from my MB865 using Tapatalk 2
devilhunter47 said:
Dude thats explained below the option..n there's a nice long thread about jbx kernel in the development section..
Sent from my MB865 using Tapatalk 2
Click to expand...
Click to collapse
Thanks, I'll care.
guruggk1988 said:
just install the jbx kernel just like how you flash the kernel by going to recovery clicking on install zip from storage , you dont ahve to change anything in the kbx kernel everything works fine :good:
Click to expand...
Click to collapse
do you need to rename the custom kernel? the one ive got from git hub really boggled me a bit...Thx a bunch
Hi folks
I am using ressurection remix v5.4 android 5.1 based custom ROM on my N5 for a couple of days and facing some bugs which are
1. When I change app drawer animation sometimes app icons don't show on the whole page.
2. When screen rotate sometimes notification keys don't appears.
3. Facebook messenger doesn't popup. I can't use when I am using another app.
4. Most of the time when I restart the phone, 'android is optimizing the apps xx of xx' appears.
And some other bugs those I can't remember right now.
So I decided to change the ROM but confused which one to choose.
My need is a stable custom ROM with some beneficial changes and most importantly with no bugs.
I really need your help folks.
Thanks
bpy13 said:
Hi folks
I am using ressurection remix v5.4 android 5.1 based custom ROM on my N5 for a couple of days and facing some bugs which are
1. When I change app drawer animation sometimes app icons don't show on the whole page.
2. When screen rotate sometimes notification keys don't appears.
3. Facebook messenger doesn't popup. I can't use when I am using another app.
4. Most of the time when I restart the phone, 'android is optimizing the apps xx of xx' appears.
And some other bugs those I can't remember right now.
So I decided to change the ROM but confused which one to choose.
My need is a stable custom ROM with some beneficial changes and most importantly with no bugs.
I really need your help folks.
Thanks
Click to expand...
Click to collapse
The one I like. Stock+root+xposed
bitdomo said:
The one I like. Stock+root+xposed
Click to expand...
Click to collapse
I had no idea about xposed as I m not very expert android user. after ur reply I googled it and liked the idea. But only one thing I don't want to loose is the USB storage support because I didn't find this on stock rom without using any app.
I've been running Cataclysm for a few weeks now
Combine that with ElementalX kernel and my phone has been rock solid, great battery life (some of the best I've seen out of it) and I couldn't be happier.
linkboy said:
I've been running Cataclysm for a few weeks now
Combine that with ElementalX kernel and my phone has been rock solid, great battery life (some of the best I've seen out of it) and I couldn't be happier.
Click to expand...
Click to collapse
Shall I download elementalX kernel separately or I will get it with cataclysm rom. And if I have to download it then is the installation process is as same as installing rom ?
bpy13 said:
Shall I download elementalX kernel separately or I will get it with cataclysm rom. And if I have to download it then is the installation process is as same as installing rom ?
Click to expand...
Click to collapse
Cataclysm rom uses stock kernel, you have to download ElemetalX separately. First flash rom and than flash kernel, but you don't have to wipe anyting before kernel flashing.
dimi3ye said:
Cataclysm rom uses stock kernel, you have to download ElemetalX separately. First flash rom and than flash kernel, but you don't have to wipe anyting before kernel flashing.
Click to expand...
Click to collapse
Thanx dimi3ye....last night I flashed the cm12 nightly caz I downloaded it before and installed the elementalx 2.10 stock/aosp version. Very much satisfied with the kernel as its giving me pretty good standby battery life though I m using the dt2w option and most importantly impressed with the sound gain option.
But still worried about custom ROM because cm12 launcher still has some bugs. So I need to know about cataclysm ROM what are the best picks of the ROM and the stability.
bpy13 said:
But still worried about custom ROM because cm12 launcher still has some bugs. So I need to know about cataclysm ROM what are the best picks of the ROM and the stability.
Click to expand...
Click to collapse
Cataclysm is based on factory images, so it is rock stable rom with excellent features. For me, Cataclysm is best rom so far.
dimi3ye said:
Cataclysm is based on factory images, so it is rock stable rom with excellent features. For me, Cataclysm is best rom so far.
Click to expand...
Click to collapse
Okay folk....let's try it....ohh another thing...if i flash cataclysm now will the kernel remain the same or it will flash to stock (sorry for the bad English and for the bothering bcoz I m new to android)
bpy13 said:
Okay folk....let's try it....ohh another thing...if i flash cataclysm now will the kernel remain the same or it will flash to stock (sorry for the bad English and for the bothering bcoz I m new to android)
Click to expand...
Click to collapse
Your curent kernel will be reflashed with kernel that comes with Cataclysm... Read first page on Cataclysm tread for flashing instructions, because latest version is sometimes just update (~ 30mb), and first you have to flash major, big version (~ 550mb) before that update...
dimi3ye said:
Your curent kernel will be reflashed with kernel that comes with Cataclysm... Read first page on Cataclysm tread for flashing instructions, because latest version is sometimes just update (~ 30mb), and first you have to flash major, big version (~ 550mb) before that update...
Click to expand...
Click to collapse
Lol....yeah I have that quantity of brain my friend......now I am downloading 21st march stable version of 5.1. Can i update latest updates over ota bcoz one of the last updates has in call proximity sensor option which is attractive.
bpy13 said:
Lol....yeah I have that quantity of brain my friend......now I am downloading 21st march stable version of 5.1. Can i update latest updates over ota bcoz one of the last updates has in call proximity sensor option which is attractive.
Click to expand...
Click to collapse
Sorry, I didn't mean to offend you... You have to flash updates via recovery.
Ohhh my friend I m not offended...just chilling.....okay do I have to maintain the sequence of the updates or just have to flash the last update. And does the major file comes with gapps or I have to flash it separately??
dimi3ye said:
Sorry, I didn't mean to offend you... You have to flash updates via recovery.
Click to expand...
Click to collapse
Ohhh my friend I m not offended...just chilling.....okay do I have to maintain the sequence of the updates or just have to flash the last update. And does the major file comes with gapps or I have to flash it separately??
bpy13 said:
Ohhh my friend I m not offended...just chilling.....okay do I have to maintain the sequence of the updates or just have to flash the last update. And does the major file comes with gapps or I have to flash it separately??
Click to expand...
Click to collapse
Gapps are included in rom. Usually, just flash latest update, if something else is needed, there is a description.
dimi3ye said:
Gapps are included in rom. Usually, just flash latest update, if something else is needed, there is a description.
Click to expand...
Click to collapse
Thanx a lot
bpy13 said:
Thanx a lot
Click to expand...
Click to collapse
One more advice, don't use twrp 2.8.6.x because it have some issues, use 2.8.5.3 instead...
dimi3ye said:
One more advice, don't use twrp 2.8.6.x because it have some issues, use 2.8.5.3 instead...
Click to expand...
Click to collapse
I am on 2.8.5.2...is it OK??
And one more thing...can u tell me the difference between beta version vs stable of cataclysm?
bpy13 said:
I am on 2.8.5.2...is it OK??
And one more thing...can u tell me the difference between beta version vs stable of cataclysm?
Click to expand...
Click to collapse
2.8.5.2 is fine... stable release means that every feature works perfect, beta is also rockstable rom, but new added features might have small issues (usually everything works perfect). I always flash latest whether is stable or beta, never had issues.
dimi3ye said:
2.8.5.2 is fine... stable release means that every feature works perfect, beta is also rockstable rom, but new added features might have small issues (usually everything works perfect). I always flash latest whether is stable or beta, never had issues.
Click to expand...
Click to collapse
didn't download the beta which has proximity sensor speaker option.