Goophone i5 - General Questions and Answers

Hi, need help to root a Goophone i5. I've tried several ways but with no success.
It's a mt6575 (mtk6575) device
Iphone i5
MZ
Armv7 rev 10(v71)
Android 4.0.4
Kernel 2.6.35.7
ALPS.GB2.MP.V2
Tried several "oneclick" software, by ADB Shell, MTK DroidTools, SP Flash tool, and are now into cygwin/Android kitchen
Anyone that can help?
I kind of need proper guide since I'm not very good at it (but learning more for each day)
I can do a scatter file but not flash a new recovery.img
Thanks
UPDATE
Final sucess!
I followed the instructions for "unsecure boot.img rooting" on
http://forum.xda-developers.com/showthread.php?t=1923764
Then I used the "Root_with_Restore_by_Bin4ry_v18"
Remember
Make sure you have working ADB and VCOM drivers installed.
Force installation with start/run/hdwwiz (or hdwiz)

root
jonce69 said:
Hi, need help to root a Goophone i5. I've tried several ways but with no success.
It's a mt6575 (mtk6575) device
Iphone i5
MZ
Armv7 rev 10(v71)
Android 4.0.4
Kernel 2.6.35.7
ALPS.GB2.MP.V2
Tried several "oneclick" software, by ADB Shell, MTK DroidTools, SP Flash tool, and are now into cygwin/Android kitchen
Anyone that can help?
I kind of need proper guide since I'm not very good at it (but learning more for each day)
I can do a scatter file but not flash a new recovery.img
Thanks
Click to expand...
Click to collapse
Maybe this cuold help you.
http://colonelzap(.)blogspot(.)com(.)br/2012/04/zopo-zp100-rooting-and-market-fix.html

hi please give some advice to root
Sent from my Xoom using xda premium

This is for the MTK6575 Goophone i5 with the specs listed above - I tried it on mine and it worked!
Credits go to ColonelZap and TPSparky
First of all, go to the settings - Developer options and check "USB debugging":
Your phone NEEDS to be recognized as an "ADB Device" on your pc (under Control Panel > Devices), or else this won't work!
Download this ROOTING SCRIPT
Unpack the RAR.
Double click the TPSparkyRoot.bat
TAKE YOUR TIME!!! Your phone will re-boot several times, be patient!!!
On success, your phone should now have a "Superuser" app installed and it should be rooted
YOU ARE DOING THIS AT YOUR OWN RISK!!!!
inpisluke said:
hi please give some advice to root
Sent from my Xoom using xda premium
Click to expand...
Click to collapse

Need help rooting goophone i5 v2 and updating binary Supersu
jonce69 said:
Hi, need help to root a Goophone i5. I've tried several ways but with no success.
It's a mt6575 (mtk6575) device
Iphone i5
MZ
Armv7 rev 10(v71)
Android 4.0.4
Kernel 2.6.35.7
ALPS.GB2.MP.V2
Tried several "oneclick" software, by ADB Shell, MTK DroidTools, SP Flash tool, and are now into cygwin/Android kitchen
Anyone that can help?
I kind of need proper guide since I'm not very good at it (but learning more for each day)
I can do a scatter file but not flash a new recovery.img
Thanks
UPDATE
Final sucess!
I followed the instructions for "unsecure boot.img rooting" on
http://forum.xda-developers.com/showthread.php?t=1923764
Then I used the "Root_with_Restore_by_Bin4ry_v18"
Remember
Make sure you have working ADB and VCOM drivers installed.
Force installation with start/run/hdwwiz (or hdwiz)
Click to expand...
Click to collapse
I'm having trouble rooting my Goophone i5 v2. I need to update the binary for Supersu, but I don't know how to fix that. Can you help me get past this by any chance? Thanks.

Related

[Q] Bedove X21

Saw this phone on deal extreme. I see there is already a thread on the Bedove x12.
The 21 has ;
Processor MTK6577 Dual-core 1.2GHz
GPU PowerVR SGX531
RAM 512MB
ROM 4GB
Available Memory 2.8GB
Memory Card Supports Micro SD / TF card up to 32GB in size (not included)
Screen Size 4.5 Inch
Touch Screen Capacitive
Resolution 854 x 480 Pixels
Can I root this phone?
Anything to watch out for. Its a fairly cheap price. Just dont wan tto get stuck.
Thanks,
Larry
Hi,
I saw the phone also on dx.com and bought it I just told myself it's quit cheap so I'll try it. And I have to say it's perfect. I'm not sure if you can root it. But why it should not work? If you have any question, just ask me, I'll try to answer you...
orcan said:
Hi,
I saw the phone also on dx.com and bought it I just told myself it's quit cheap so I'll try it. And I have to say it's perfect. I'm not sure if you can root it. But why it should not work? If you have any question, just ask me, I'll try to answer you...
Click to expand...
Click to collapse
have you tried rooting as yet?
I rooted x21!!!
Hey guys,
i made this account to share with you: i rooted the x21.
i used Bin4ry's tool for this, you can find it here:
http://forum.xda-developers.com/showthread.php?t=1886460
just follow the instructions carefully and you should be fine!
sincerely,
a rooted x21 owner.
Hey guys, hope this tool helped you guys rooting your x21.
im currently working on getting a cwm recovery on the phone but i have screwed up....
anyone here who can send me the original recovery image?
thanks in advance!
x21 cwm
Dear Members,
If you need a Bedove X21 cwm recovery, I made one based on bgcngm scripts and you can reach it here.
This is the second version, with proper product information (derived from stock rom)
Original Rom dump needed for Bedove X21 ICS 4.0.9 / Wayestar A822 JB 4.1.2
How r u doing guys?
Just bricked my Bedove x21 ICS 4.0.9 trying to root it.
I'm trying to use the SP Flash Tool v3.1236.0.sn43 (available at the dropbox link at the first page of the "Tutorial sobre como instalar ROM rooteada y con Gapps Bedove x12" - google it!)
I've managed to flash a Zopo ROM in META Mode (Vol Up + Power, while connecting to USB port, after pressing Download button in the SP Flash Tool).
The trick is to change the Options>DA Download All>Speed to "Do Not Switch Speed" in the SP Flash Tool before clicking on the Download button.
Unfortunately, my Bedove X21 still bricked.
The only thing I need to put it working is a complete RomDump of Bedove X21 which I don't have.
This is a good guide to do it: http : //d-h.st/d8a
It shall work with the bedove x21 mt6577 as well...
I've just noticed that it might also exist a JB 4.1.2 version of Bedove X21, re-branded as Wayestar A822.
Is it possible to make one or both Factory ROMs available somehow?
The JB 4.1.2 might be a good update!
Pls help!
Thanks
Did someone manage to root Bedove X21 with JB4.1.2?
Root many devices and mtk droidtools are NOT working on the JB firmware.
If someone does find a way, please share. Thx in advance.
gersma said:
Did someone manage to root Bedove X21 with JB4.1.2?
Root many devices and mtk droidtools are NOT working on the JB firmware.
If someone does find a way, please share. Thx in advance.
Click to expand...
Click to collapse
I've ordered a Bedove X21 in China and waiting for delivery.
Not sure about rooting yet but will try when delivered.
Can you tell me were to find JB4.1.2 ROM you're talking about ?
Stock Android is 4.0.9 so probably you found a better ROM.
I have bought two of these phones. One came with stockrom jb 4.1.2 and no known root methods are working. The other one had ics 4.0.9 and rooting that one was a piece of cake.
So to answer your question : the jellybean rom was preinstalled and as long the phone is not rooted I wont be able to share the rom with you guys.
In case you have the jb rom too when your phone arrives and you find a succesfull and safe rooting method, it would be greatly appreciated if you'd share your findings.
Thx in advance.
gersma said:
I have bought two of these phones. One came with stockrom jb 4.1.2 and no known root methods are working. The other one had ics 4.0.9 and rooting that one was a piece of cake.
So to answer your question : the jellybean rom was preinstalled and as long the phone is not rooted I wont be able to share the rom with you guys.
In case you have the jb rom too when your phone arrives and you find a succesfull and safe rooting method, it would be greatly appreciated if you'd share your findings.
Thx in advance.
Click to expand...
Click to collapse
Perhaps you can make a Nandroid backup of the JB ROM using the following steps:
01. Download Fastboot:
https://dl.dropboxusercontent.com/u/54398839/Fastboot+ADB(20206).zip
02. Unpack 'Fastboot+ADB(20206).zip'
03. Connect USB cable
04. Hold the Volume+ and Power button until it vibrates and shows you a menu.
Select 'Fastboot' using Volume+ button.
Press Volume- button to confirm.
05. Open cmd window and goto directory \Fastboot+ADB(20206)
06. Type the following command and press enter:
fastboot boot CWM-6.0.2.8_Acer-E1.img
07. Device will now boot to CWM
I used this method to create a Nandroid backup of my wife's Acer Liquid E1 before rooting or changing stock recovery.
Perhaps it works for the Bedove X21 or you can try to use another .img as recovery file.
hzuu said:
Perhaps you can make a Nandroid backup of the JB ROM using the following steps:
01. Download Fastboot:
https://dl.dropboxusercontent.com/u/54398839/Fastboot+ADB(20206).zip
02. Unpack 'Fastboot+ADB(20206).zip'
03. Connect USB cable
04. Hold the Volume+ and Power button until it vibrates and shows you a menu.
Select 'Fastboot' using Volume+ button.
Press Volume- button to confirm.
05. Open cmd window and goto directory \Fastboot+ADB(20206)
06. Type the following command and press enter:
fastboot boot CWM-6.0.2.8_Acer-E1.img
07. Device will now boot to CWM
I used this method to create a Nandroid backup of my wife's Acer Liquid E1 before rooting or changing stock recovery.
Perhaps it works for the Bedove X21 or you can try to use another .img as recovery file.
Click to expand...
Click to collapse
Did you receive your phone already? any luck with rooting? I tried the method you posted above and i cannot get the device to boot the cwm recovery for the x21 model?
hzuu said:
I've ordered a Bedove X21 in China and waiting for delivery.
Not sure about rooting yet but will try when delivered.
Can you tell me were to find JB4.1.2 ROM you're talking about ?
Stock Android is 4.0.9 so probably you found a better ROM.
Click to expand...
Click to collapse
you got the phone? how much did you pay and where did you get it? I am undecided whether to take it or mix*shop or c*vasion ...
were you able to rott and have found the rom?
about my topic
http://forum.xda-developers.com/showthread.php?t=2260778
soulstefan said:
Hey guys,
i made this account to share with you: i rooted the x21.
i used Bin4ry's tool for this, you can find it here:
http://forum.xda-developers.com/showthread.php?t=1886460
just follow the instructions carefully and you should be fine!
sincerely,
a rooted x21 owner.
Click to expand...
Click to collapse
How exactly did you do it?
I mean, did you have to enter download mode (pushing the power button plus volume up/down, whatever) or removing the battery before?
Thanks in advance.
EDIT: I did it!! I installed the proper ADB drivers on a Windows (>_<) XP PC and, using Bin4ry's Rooting method, I succeeded to root it!!
Now I don't know what to do because I ordered a Star B94M / B943 Quadcore with plenty of ROMs ready to be flashed because I thought that I couldn't root my Bedove X21... anyway, if someone tried to flash a ROM and succeeded in doing so, please comment. Maybe not everything is lost and we can squeeze more our Bedove X21
cappa72 said:
Dear Members,
If you need a Bedove X21 cwm recovery, I made one based on bgcngm scripts and you can reach it here:
http: // data.hu/get/6241298/X21-cwm-recovery.img
(removing the unnecessary spaces from the link you will be able to download that.)
Click to expand...
Click to collapse
Has anyone tried this? Maybe somebody has tried to flash this image and suceeded. Have you tried any non-custom ROM?
I think that the way of flashing it is using some Flash tools or something like that, isn't it?
ChuSGC said:
How exactly did you do it?
I mean, did you have to enter download mode (pushing the power button plus volume up/down, whatever) or removing the battery before?
Thanks in advance.
EDIT: I did it!! I installed the proper ADB drivers on a Windows (>_<) XP PC and, using Bin4ry's Rooting method, I succeeded to root it!!
Now I don't know what to do because I ordered a Star B94M / B943 Quadcore with plenty of ROMs ready to be flashed because I thought that I couldn't root my Bedove X21... anyway, if someone tried to flash a ROM and succeeded in doing so, please comment. Maybe not everything is lost and we can squeeze more our Bedove X21
Click to expand...
Click to collapse
much easier way is to download srstools 1 click rooting works fine for my bedove x21 jb choose smartroot :good:
patje29 said:
much easier way is to download srstools 1 click rooting works fine for my bedove x21 jb choose smartroot :good:
Click to expand...
Click to collapse
Well, the fact is that I succeeded using Bin4ry's script.
Do you know about any custom or official ROM other than the stock 4.0.9?
Help
ChuSGC said:
Well, the fact is that I succeeded using Bin4ry's script.
Do you know about any custom or official ROM other than the stock 4.0.9?
Click to expand...
Click to collapse
stock rom you can find here http :// www .bedove.cn/download/%E8%B4%9D%E5%A4%9A%E8%8A%AC%E5%AF%B9%E5%BA%94%E8%A1%A8.xls[/url] it is a excel file ( mind the spaces in link ) with al the bedove phone's and official roms ..... but there's one problem al chinese versions but you can change the language because they are multi language .. this did'nt worked for me i fd up my nand flash :crying: don't know how to recover that so if any body can help ??????? please ....
Well, you can try bin4ry's tool to unroot and to root back. It installs a stock recovery
---------- Post added at 08:05 AM ---------- Previous post was at 08:01 AM ----------
patje29 said:
stock rom you can find here http :// www .bedove.cn/download/%E8%B4%9D%E5%A4%9A%E8%8A%AC%E5%AF%B9%E5%BA%94%E8%A1%A8.xls[/url]
Click to expand...
Click to collapse
So no custom ones like cyanogenmod, aokp, pacman...
Nevermind... maybe I'll try some ROMs for other MTK6577 phones and hope they work...
ChuSGC said:
Well, you can try bin4ry's tool to unroot and to root back. It installs a stock recovery
---------- Post added at 08:05 AM ---------- Previous post was at 08:01 AM ----------
So no custom ones like cyanogenmod, aokp, pacman...
Nevermind... maybe I'll try some ROMs for other MTK6577 phones and hope they work...
Click to expand...
Click to collapse
Any luck with roms for bedove x21...and also have root this fone already successfuly
Change of files
soulstefan said:
Hey guys,
i made this account to share with you: i rooted the x21.
i used Bin4ry's tool for this, you can find it here:
http://forum.xda-developers.com/showthread.php?t=1886460
just follow the instructions carefully and you should be fine!
sincerely,
a rooted x21 owner.
Hey guys, hope this tool helped you guys rooting your x21.
im currently working on getting a cwm recovery on the phone but i have screwed up....
anyone here who can send me the original recovery image?
thanks in advance!
Click to expand...
Click to collapse
So guys,
I have made some changes on my device, it's a bedove x21, in fact, i lost this files: wlan.ko; su. Both files are in the folder named "system". The path is system/bin/su - for "su" file- and system/lib/modules/wlan.ko - for "wlan.ko" file. My device can't connect on the wi-fi connection. Someone have the same device and can make a back-up these files for me?? Thanks!!

[Q] [HELP] How To Root S7180 (NoteII Clone)

Hi,
Anyone have idea how to root S7100, S7180 & H7100 smartphone?
Thanks.
Have you tried the classical method ?
http://forum.xda-developers.com/showthread.php?t=1886460
ben_from_paris said:
Have you tried the classical method ?
http://forum.xda-developers.com/showthread.php?t=1886460
Click to expand...
Click to collapse
I succeeded to root my Star S7180
Look for
"Cwm Recovery S7100 by Angelobiz"
and flash it using the last part of this manual "MT6577 CWMR Root Updated V2"
Then you can boot into the clockwork mod and install a "su" root zip.
/Sparcky
DaKMuO said:
Hi,
Anyone have idea how to root S7100, S7180 & H7100 smartphone?
Thanks.
Click to expand...
Click to collapse
If it is a Star / HDC / UPAI Note 2 clone also known as a N7100+ S7100 and S7180 then there is a spanish forum which has instructions and fixed versions of the stock rom
http://www.movilesdualsim.com/foro/forums/128-N7100-S7180
there is a moderator there who has deodexed and fixed some of the problems with the stock rom
Installing and flashing CWM for this phone is not for the faint of hearted. Using the MTK flash tool and creating your own scatter flash file and even your own up to date CWM is advisable. There is a thread on here which explains how to do the flashing and creating your own CWM recovery.
Or you use the CWM by the spanish forum and their instructions
good luck!
s7180
whetstone said:
If it is a Star / HDC / UPAI Note 2 clone also known as a N7100+ S7100 and S7180 then there is a spanish forum which has instructions and fixed versions of the stock rom
there is a moderator there who has deodexed and fixed some of the problems with the stock rom
Installing and flashing CWM for this phone is not for the faint of hearted. Using the MTK flash tool and creating your own scatter flash file and even your own up to date CWM is advisable. There is a thread on here which explains how to do the flashing and creating your own CWM recovery.
Or you use the CWM by the spanish forum and their instructions
good luck!
Click to expand...
Click to collapse
OK, I've looked on the spanish forums and I really cant get my head around it. Ive had some rooting experience via Odin when rooting my HTC One X and Galaxy S3 but nothing like this. Anyone care to do a guide in proper English as opposed to google's translated guide? Ideally I want to gain root access and install an improved rom. The one which is installed with the phone is pretty lame.
Thanks guys, any help appreciated
Matt
s7180
Further to my last post, if this is any good I keep getting the following error when I try to flash recovery.img to the handset:
BROM ERROR : S_FT_NEED_DOWNLOAD_ALL_FAIL (4050)
Need download all images!
.................I havent a clue what the hell that means. Grr, its doing my nut in
I tried translating the spanish forum to no avail.
I also tried using the method for the NT6577 chipset, nadda.
Any help would be appreciated
STAR S7180 (Note2 Clone)- NEED A ROOT METHOD - ICS
Thanks all for helping me..
ill try and update here.. :good: :laugh:
clockwork mod on s7180
Sparcky said:
I succeeded to root my Star S7180
Look for
"Cwm Recovery S7100 by Angelobiz"
and flash it using the last part of this manual "MT6577 CWMR Root Updated V2"
Then you can boot into the clockwork mod and install a "su" root zip.
/Sparcky
Click to expand...
Click to collapse
It would appear that your the only one who has managed to root yours. Please would you mind compiling an idiots guide for us noobs If I can get Clockwork mod on the phone I think I could probably figure the rest out.
Much obliged
Matt
Thanks for the pointers guys, I was unable to escape the bootloader!
its not a guide as such but might help in giving more pointers.
I managed to replace the existing recovery and replace it with my own generated CWM recovery.
In order to do this I followed this guide!
http://forum.xda-developers.com/showthread.php?t=1923764 which has a link to a tutorial
I went and installed the droid kitcen and MT6577 plugin as well in order to create my own recovery as that was my prefference. use any files of the internet at your own risk or lower the risk and DIY it!
This is curtesy of yuweng who did all the hard work writing it up.
Regarding to my phone which is classed as an S7180 or N7100+
I found this website
http://gt35pro-mobile-gadgets.blogspot.co.uk/2012/12/hdc-s7100-note-2-is-now-renamed-hdc.html
He also gives out the links to which packages to download inlcuding a CWM recovery.
**************************** disclaimer *************
Don't use a scatter file that you did not create using the tools that yuweng is referencing to in his thread and tutorial!!!!!!!!!
if you use the wrong scatter file you flash the recovery into the wrong section of memory and therefore run at a HUGE risk of bricking the phone
***************************** disclaimer end *************
In essence the order I did things in
Backed up my original recovery using the Flashtool
Created my own CWM recovery using the Android Kitchen which needs the MT6577 tool and plugin installing as a mod (search XDA for the guide as to hoto do the install and yuweng also has a tutorial on how to add the MT6577 recovery generation for this)
Using MTK Droid tools to generate my own scatter file. ( a scatter file is like a memory map as to where the start and is and in this case the map for the CWM)
then using the Flash tool i flashed it using my scatter and my previously created CWM. See yuweng tutorial.
Again Gregg has provided a CWM, I can't comment on it as I never tried it.
anyway the moment i had CWM, I flashed the ROM that was on that blog page. Which came of the spanish forum originally. And they are now on version 1.2 las time I looked. 1.0 fixes a few things, i am using 1.1 as 1.2 removed the touchwiz look a like launcher and my 3D sheep widget
TIPS
* Driver installation is crucial to succesfully flashing with the FlashTool
- Switch phone off and remove the battery, then plug it in. Complete that driver install
- Re-insert battery and check without booting it you will notice that it does not have the same behaviour as with battery...very odd...still do it just in case
-boot it up and once ready put it in USB debug mode and connect usb lead and let the driver install complete
* READ THE TUTORIALS - Seriously i spent 1/2 day nonstop checking things
* Don't do this if you are not sure about what you are doing at all.
* Check your scatter file values for where the recovery is going to be flashed at least 4 times before commiting them into the flashtool. It pays to be safe!!
* Dont get freaked out by Hex values when you put them into the flashtool. if it looks wrong then check again. Only when you press the download button in the flashtool with your phone attached will it start.
stupid question
Hi ! Im following yuweng tutorial to make my own recovery ,but im stucked in starting android kitchen. I have installed all and i am at page 13 of the manual , when i am at in the cygwin command windows at cygdrive/c/android-kitchen-0.219/ and type "menu" ,nothing happens , just "comand not found" ,How do i start kitchen menu?
Its the fisrt time im doing this ,so may be a stupid question.....sorry.
Thanks in advance.
Edit : bash menu , yep , it was a stupid question
DaKMuO said:
Hi,
Anyone have idea how to root S7100, S7180 & H7100 smartphone?
Thanks.
Click to expand...
Click to collapse
i have been trying to root my Star s7180 for a week and nothing seems to work. Tried everything.
Hi guys i find it
i dont know the resolution on my phone (i not check), but this firmware works!!!
On the directory of Firmware there is a screenshot for set the Software FLASH
Download it
SP_MDT http://www.mediafire.com/download.php?d7d02dq60z3tar7
2013.3.27 root beta1-fade.part1 http://www.mediafire.com/download.php?zbuu24ulnm26zj3
2013.3.27 root beta1-fade.part2 http://www.mediafire.com/download.php?bxxhifcpvr392bw
DaKMuO said:
Hi,
Anyone have idea how to root S7100, S7180 & H7100 smartphone?
Thanks.
Click to expand...
Click to collapse
Rooted my Star s7180 with Kingo Android ROOT
S7100 Working Root Exploit
tdroid876 said:
Rooted my Star s7180 with Kingo Android ROOT
Click to expand...
Click to collapse
Hey everyone,
After spending hours toiling through the different methods listed above (thanks to everyone for posting those), I've found a much simpler way to root the S7100, not sure about the other ones.
Go to:
http://forum.xda-developers.com/showthread.php?t=2130276
and download the Framaroot 1.6.1 .apk to you phone. Install it, and wham, rooted. Or at least thats how simple it was for me: Hope it works for anyone else trying to root.
Note: This root exploit also works on many other types of phones as the thread explains.
It doesn't install the recovery or anything, but it's certainly a start.
Specs about the phone:
Model Number: e1901_v77_jdt1_9p017_fwvga
Android Version: 4.1.2
Baseband Version: MAUI.11AMD.W12.22.SP.V15,2012/10/08 20:22
Build Number: e1901_v77_jdt1_9p017_fwvga_2013088

[Q] Coby Kyros MID1060

I have question about rooting android device. I searched all formus but i didn't find any answer. I'm trying to root my device Coby Kyros MID1060
Mobel nr. MID1060
Android verison: 4.0.4
Kernel verison: 3.0.8
Build number: 20121205
I tried a lot of rooting solutions: Z4root, SuperOneClick, Root_with_Restore_by_Bin4ry....Nothing works -.-
Z4root suddenly stop working when i click temporary or permanent root, SuperOneClick doesn't work after 5# step, I don't know why....Bin4ry root also doesn't work.. first there are a lot or errors, sometimes when I click "restore data" 2nd time, it doesn't do anything; but when it does, a lot of errors and "permision denied"...
I also tried to root it myself under linux with adb... I successfully copied all needed files, but when I tried to run ./psneuter i got this "failed to set prot mask" and nothing works again....
I'm noob in rooting world but how coul'd this be possible, that nothing works on my device??!!! I searched all web and there is no root.
any help?
poretga99 said:
I have question about rooting android device. I searched all formus but i didn't find any answer. I'm trying to root my device Coby Kyros MID1060
Mobel nr. MID1060
Android verison: 4.0.4
Kernel verison: 3.0.8
Build number: 20121205
I tried a lot of rooting solutions: Z4root, SuperOneClick, Root_with_Restore_by_Bin4ry....Nothing works -.-
Z4root suddenly stop working when i click temporary or permanent root, SuperOneClick doesn't work after 5# step, I don't know why....Bin4ry root also doesn't work.. first there are a lot or errors, sometimes when I click "restore data" 2nd time, it doesn't do anything; but when it does, a lot of errors and "permision denied"...
I also tried to root it myself under linux with adb... I successfully copied all needed files, but when I tried to run ./psneuter i got this "failed to set prot mask" and nothing works again....
I'm noob in rooting world but how coul'd this be possible, that nothing works on my device??!!! I searched all web and there is no root.
any help?
Click to expand...
Click to collapse
Same here my friend.I m also kind a noob but i rooted a lot of phones allready with 100% succses but i cant root my mid1060 and my other mid 8128 stucked in boot loop after rooting and installing new rom.So i definetly need some help about. more people will look for solution better are chances to get done.So if you maybe allready get rooted your 1060 let me know how did you do it?
peace
same here i already tried to root my 1060 with all rooting kit.,but no luck., i also tried the root with restore by bin4ry but always denied.,
poretga99 said:
I have question about rooting android device. I searched all formus but i didn't find any answer. I'm trying to root my device Coby Kyros MID1060
Mobel nr. MID1060
Android verison: 4.0.4
Kernel verison: 3.0.8
Build number: 20121205
I tried a lot of rooting solutions: Z4root, SuperOneClick, Root_with_Restore_by_Bin4ry....Nothing works -.-
Z4root suddenly stop working when i click temporary or permanent root, SuperOneClick doesn't work after 5# step, I don't know why....Bin4ry root also doesn't work.. first there are a lot or errors, sometimes when I click "restore data" 2nd time, it doesn't do anything; but when it does, a lot of errors and "permision denied"...
I also tried to root it myself under linux with adb... I successfully copied all needed files, but when I tried to run ./psneuter i got this "failed to set prot mask" and nothing works again....
I'm noob in rooting world but how coul'd this be possible, that nothing works on my device??!!! I searched all web and there is no root.
any help?
Click to expand...
Click to collapse
Hi guys. I have this device too. This is using an AMLOGIC AML8726-MX chip. Got my device rooted using the instructions here in JBolho's thread: http://forum.xda-developers.com/showthread.php?t=2146226. Glennski's kyros was rooted using this method too.
Regarding GApps, I don't know if it will work for everybody but I got mine to install GApps by first changing the model info and fingerprint in the build.prop after I rooted the device. I used a Google certified device. But I suggest to backup your build.prop first. Then I downloaded the latest universal ICS package in http://wiki.rootzwiki.com/Google_Apps. I'm new at this so I placed the zip file in an external SDCARD and tried to update from recovery same as the rooting steps. But it didn't work, so extracted the gapps zip file on my SDCARD, copied the files in the system folder, and then pasted them on my root's system folder. Restarted the device and that seemed to do the trick.
Anyway, try at your own risk.
I'm currently looking for the build.prop file of the Kyros MID1065. The 1060 and 1065 seems to have the same hardware but the 1065 is Google certified.
I have stock 1060 files.contact me on privat and give me mail and i will send you file.
Sent from my GT-N7100 using xda app-developers app
coby mid1065 build.prop file
gritzvon said:
I'm currently looking for the build.prop file of the Kyros MID1065. The 1060 and 1065 seems to have the same hardware but the 1065 is Google certified.
Click to expand...
Click to collapse
Hi gritzvon!
Have you already fould the build.prop file for the mid1065? I'm also interested in the same issue
Thanks.
Coby MID1060 Root success.
Hi everyone, I've successfully rooted my device with the CrystalRoot. You can look in android tablets and search for Coby Kyros MID1060. There's a very nice tutorial there that it works great
Best regards,
No Sound And Wireless
Hi, Iv'e Bought an 1060, and After Root and Install Gaps, i notice that the sound is missing after suspension.
Another issue i've is about the network wireless Signal.
I'm about 1 meter from the Router and i've only a very weak signal.
Cloud you Help PLz
Coby MID1060 hard bricked
gruvr said:
I have stock 1060 files.contact me on privat and give me mail and i will send you file.
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
I've a hard bricked MID1060, and i can´t find any stock rom for this model to flash with aml flash tool.
Anyone have a rom original or compatible to this tablet? I´ve a dump from other tablet, but i don´t have u-boot.bin and u.image_recovery.
stock rom Coby MID 1060
Anyone can post stock rom files to Mid1060, to flash it with usb burning tool?
Original Rom!
Global_tech said:
Anyone can post stock rom files to Mid1060, to flash it with usb burning tool?
Click to expand...
Click to collapse
Hi Global, if you know a way of copying the original rom can you tell me? My coby got wicked and sent it to warranty, they changed everything inside. Now I've got a completely new tablet with original software.
If you know a way of backing this all up tell me how and I'll share it with you
MaedaKeiji said:
Hi Global, if you know a way of copying the original rom can you tell me? My coby got wicked and sent it to warranty, they changed everything inside. Now I've got a completely new tablet with original software.
If you know a way of backing this all up tell me how and I'll share it with you
Click to expand...
Click to collapse
Hello! I've a backup from other MID1060, but after restore, the tablet only turn on with light on, no image. I have image only, when a put the sd card with the recovery, the tablet full restore the update.zip, but after reboot only have backlight, no image.
I've tried several roms with usb burning tool, but is the same, no image. I need a stock rom MID1060 to flash with usb burning tool.
I need the correct u-boot-orig.bin, usb_spl.bin, uImage_recovery, update.zip, and correct config_progress.xml. I tried mix several u-boot-orig.bin, usb_spl.bin, uImage_recovery, and correct config_progress.xml, from other roms, but after flash with usb burning tool the tablet don´t turn on. The only rom i can turn it on and went to recovery is the stock rom of Viewsonic VB 80a PRO. I go try find the ViewSonic VB100a Pro stock rom and flash it, to view whats append.
Global_tech said:
Hello! I've a backup from other MID1060, but after restore, the tablet only turn on with light on, no image. I have image only, when a put the sd card with the recovery, the tablet full restore the update.zip, but after reboot only have backlight, no image.
I've tried several roms with usb burning tool, but is the same, no image. I need a stock rom MID1060 to flash with usb burning tool.
I need the correct u-boot-orig.bin, usb_spl.bin, uImage_recovery, update.zip, and correct config_progress.xml. I tried mix several u-boot-orig.bin, usb_spl.bin, uImage_recovery, and correct config_progress.xml, from other roms, but after flash with usb burning tool the tablet don´t turn on. The only rom i can turn it on and went to recovery is the stock rom of Viewsonic VB 80a PRO. I go try find the ViewSonic VB100a Pro stock rom and flash it, to view whats append.
Click to expand...
Click to collapse
Hi, I have this same problem - only backlights when power on. Maybe youe resolve these problem? I can try put backup image but i haven't copy - can you sent me link?
Sry for my english.
Thnks
gruvr said:
I have stock 1060 files.contact me on privat and give me mail and i will send you file.
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
I was searching for help with my Coby Kyros MID1060 and came accross your post. I inadvertently deleted my "Settings.apk" file in my Systems folder and was looking for the original factory file. Could you help please? Thanks.
Hello my friends,
I made mistake and i bought this Tablet MID1065 10.1" without knowing that it hasn't Google services.
Has anybody rooted and placed the Google services and worked fine? Can anybody explain in details, or shall i through away from the window this machine.?
Thank you in advance if someone spent few minutes to reply to all of rest of us.
Stragr
Hi, how do I send you PM? I have the Kyros 1060-16 and it blocks starting up. Someone told me that a late upgrade screwed it.. that I need the previous software. Is this right?
gruvr said:
I have stock 1060 files.contact me on privat and give me mail and i will send you file.
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
Hello, can you pls send me ?

[Q] O+ 8.6 is it really Unrootable?

damn i've spent so much time now trying to root my device
Model: O+ 8.6 Android
Andr. version: 4.1.1 JB
CPU: MT6577
and the spft method doesn't work zzz... already tried step by step to unsecure boot.img but didn't do ****, unsecuring was successful it's the flashing that's giving me the headache! still with that brom error **** even if i've readback it already from the stock boot.img.
anyone else have a better idea? i'm really open for anything.
anyways here's my stock boot.img attached
azfallon said:
damn i've spent so much time now trying to root my device
Model: O+ 8.6 Android
Andr. version: 4.1.1 JB
CPU: MT6577
and the spft method doesn't work zzz... already tried step by step to unsecure boot.img but didn't do ****, unsecuring was successful it's the flashing that's giving me the headache! still with that brom error **** even if i've readback it already from the stock boot.img.
anyone else have a better idea? i'm really open for anything.
anyways here's my stock boot.img attached
Click to expand...
Click to collapse
Try using Root Genius. Some 0+ 8.6 users say that it worked. Try it. Maybe it'll help you. I cant try it because my phone is still in warranty period.
Try using RootMaster, it worked for me.

totally bricked? Alcatel Pixi 3 (8) WiFi - model 8070

Hello. This Alcatel Pixi 3 tablet was meant as a gift add-on to an Orange (PL) LG G4c / Spirit LTE phone.
What is really weird is that there is no such model on Alcatel's website. It seems that this version was very unpopular.
It came with Lollipop 5.0.1 onboard. On boot screen it says ALCATEL onetouch Pixi3(8). on the back there is a sticker with Model: 8070 and some other numbers, but the thing is:
I was simply being an impatient one and i wanted to have this white boy rooted so i installed newest KingRoot. And it worked!
But then I've seen there's an app that does the magic and replaces kinguser with supersu. And it was called 'SuperSU Me', kind of.
Unfortunately it must have been a very old version (i tried the newest on my phone and it comes in two stages so it's different). After using it i don't remember if I ran su binary update but i think i did and then reboot. And of course it all went wrong after that.
It was stuck at the Alcatel boot animation, repeating itself endlessly. And instead of looking for solution i did something else. I went to the bootloader mode (vol+ and power) which lets you go into recovery or fastboot and i went to recovery. Where it actually says Android system recovery <3e> with additional line saying LRX21M and options apply update from ADB, sdcard, cache and some others.
So here's what I did: at first I wiped cache partition and then I wiped data ('wipe data/factory reset'). And this is mess.
There is no Alcatel animation, no more. Now it won't go further than this boot screen and it would just display this ALCATEL onetouch Pixi3(8) logo until it runs out of battery power. So i guess, that's my first bricked device for being naughty and too greedy to have some rooted stuff happening.
Please, is there any hope? Help?
Same Problem with Alcatel Pixi 3 (10) Model:8079!!!!
You might be able to restore ROM using Mobile upgrade tool from Alcatel. Or you can flash it with phone flash tool.
Hi @dam85 I found and downloaded "Mobile Upgrade S" tool from Alcatel's server directly (v4.2.8) but I cannot make the tool detect this Pixi 8070 model. The main Alcatel site doesn't have this model, so I got their tool from the Pixi 3 (8) 3G page. However, not sure what is missing as there seems to be a driver needed for the Alcatel tool to detect the table. Any idea? This 8070 model apparently uses quad-core MediaTek MT8127 processor.
I have purchased this device from a local shop, not via operator. Model is "TCL" and "8070" in the menus.
@Bethain: I had a friend who had to wipe and re-install the ROM on an Alcatel D5 phone, due to some boot loop like yours; and he was able to do that using the Alcatel Upgrade tool. Please try this and let us know how you did it and more importantly, which drivers you used on Windows! Thanks and good luck.
konsti said:
Hi @dam85 I found and downloaded "Mobile Upgrade S" tool from Alcatel's server directly (v4.2.8) but I cannot make the tool detect this Pixi 8070 model. The main Alcatel site doesn't have this model, so I got their tool from the Pixi 3 (8) 3G page. However, not sure what is missing as there seems to be a driver needed for the Alcatel tool to detect the table. Any idea? This 8070 model apparently uses quad-core MediaTek MT8127 processor.
Click to expand...
Click to collapse
It's true that this model is buried for some weird reason. You can't find anything specific for this model (pixi 3 (8) wifi), only for the 3g edition that is totally different hardware if I remember correctly.
I can suggest another option. I've managed to read back the stock rom from mine. I could send it to you and you can try to flash it with SP flash tool. If you're interested, pm me and I'll guide you.
Hi @dam85 thank you for posting back, it's great to hear that someone managed to work on this.
For the sake of information with others, can you kindly share info on the tools, versions (and if not asking too much, links here in XDA) that you used to extract the ROM? There's tonns of crap on the internet and some confusing driver versions found here, too...
I was battling with MtkDroid Tools 2.5.3 but I think I've installed the wrong VCOM driver, not sure if it supports the device (MT8127 processor) or perhaps I am doing something wrong.
The official Alcatel Mobile Upgrade S (v4.2.8 that I've installed) has a generic "One Touch Pixi 8" entry as you can see in the screen shot but I get some error when trying to connect my device. This is supposed to allow a download of an image to re-flash Alcatel devices... Perhaps this tool isn't compatible, as you say.
I have contacted Alcatel asking for support....
I haven't rooted nor I want to mess with that. Just wanted to make a safe backup of the current ROM. When I entered (official) the Recovery menu of the device (POWER + VOLup) there wasn't any entry in the options to "dump" the ROM on the SD, unfortunately.
konsti said:
For the sake of information with others, can you kindly share info on the tools, versions (and if not asking too much, links here in XDA) that you used to extract the ROM? There's tonns of crap on the internet and some confusing driver versions found here, too...
I was battling with MtkDroid Tools 2.5.3 but I think I've installed the wrong VCOM driver, not sure if it supports the device (MT8712 processor) or perhaps I am doing something wrong.
Click to expand...
Click to collapse
I'll post a mini guide later on how I did it. Also, I'd like to see a user with a bricked pixi to try and flash back the ROM to see if it can be revived!
konsti said:
The official Alcatel Mobile Upgrade S (v4.2.8 that I've installed) has a generic "One Touch Pixi 8" entry as you can see in the screen shot but I get some error when trying to connect my device. This is supposed to allow a download of an image to re-flash Alcatel devices... Perhaps this tool isn't compatible, as you say.
Click to expand...
Click to collapse
Yeap. I tried this one too, with vcom drivers up and running, but nothing happened. Maybe we'll have to wait for an update.
konsti said:
I have contacted Alcatel asking for support....
Click to expand...
Click to collapse
Looking forward to hear their answer.
konsti said:
I haven't rooted nor I want to mess with that. Just wanted to make a safe backup of the current ROM. When I entered (official) the Recovery menu of the device (POWER + VOLup) there wasn't any entry in the options to "dump" the ROM on the SD, unfortunately.
Click to expand...
Click to collapse
Just to make it clear. There is no way to dumb the rom with droid tools or sp flash tool without root. The most easy and safe way to root this tablet is with Kingroot v4.5. It's safe to use because there is an option for unroot inside the app (I've done it several times, it works flawlessly).
I am having the same exact issue and followed the same steps as you to get into this mess! Only difference is i am on a onetouch Pixi 7 i got from tmobile for free. Were you ever able to flash it back to stock and can you tell me how you did it if you were successful?
waldosdad said:
I am having the same exact issue and followed the same steps as you to get into this mess! Only difference is i am on a onetouch Pixi 7 i got from tmobile for free. Were you ever able to flash it back to stock and can you tell me how you did it if you were successful?
Click to expand...
Click to collapse
Hi @waldosdad I suggest you try obtaining the official Alcatel Mobile Upgrade S software from their site, this will hopefully download and restore your device. Please kindly post details on your model, CPU, which drivers you eventually managed to make work, on which Windows, etc.
http://www.alcatelonetouch.com/fr/assistance/telechargements/pixi_7.html
Click to expand...
Click to collapse
There's no ROM available for flashing except whatever backups private people do... Haven't found custom recovery either... I personally haven't rooted my Pixi 3 (8) to avoid that exact issue...
IMPORTANT EDIT:
I was browsing through the downloads section of Alcatel One Touch and found that for some reason, they have released more versions of the same "Mobile Upgrade S" for some other devices, rather than keeping a unified version across all platforms/tablets/products.
For example, found versions v4.3.0, or v4.4.1 in other devices, which could imply "newer" database or detection, inside Alcatel Mobile Upgrade S. As @dam85 told me, there may need to be a newer version of this proggie to detect Pixi 3 (8) -- will try it soon...
Hi guys i have the same tablet but i'm having problems rooting it. Tried many differnet apk's with no luck. @dam85 how you managed to root it?
Some extra info just to be sure:
Manufacturer: TCL
Model: 8070
Android Version: 5.0.1
Build ID: vN4BH2-AndroidL-KR080-EMEA_GREEK
Board ID: 8070
Chipset Platform: mt8127
Edit: Ok, it seems that i have used different versions of Kingroot (4.1, 4.8) except 4.5 that you mentioned. It worked now. Dumb me i guess..
spithash said:
Hi guys i have the same tablet but i'm having problems rooting it. Tried many differnet apk's with no luck. @dam85 how you managed to root it?
Some extra info just to be sure:
Manufacturer: TCL
Model: 8070
Android Version: 5.0.1
Build ID: vN4BH2-AndroidL-KR080-EMEA_GREEK
Board ID: 8070
Chipset Platform: mt8127
Edit: Ok, it seems that i have used different versions of Kingroot (4.1, 4.8) except 4.5 that you mentioned. It worked now. Dump me i guess..
Click to expand...
Click to collapse
Καλησπέρα @spithash, I suggest you try backing up your ROM now that you've rooted it, as @dam85 did already, as there's no ROM available for flashing back in case of bricking... I personally haven't rooted yet. If you manage to install proper Windows drivers etc. please let us know what you used i.e. SP Flash Tool, Mtk Droid Tools etc. Thanks!
konsti said:
Καλησπέρα @spithash, I suggest you try backing up your ROM now that you've rooted it, as @dam85 did already, as there's no ROM available for flashing back in case of bricking... I personally haven't rooted yet. If you manage to install proper Windows drivers etc. please let us know what you used i.e. SP Flash Tool, Mtk Droid Tools etc. Thanks!
Click to expand...
Click to collapse
So, i made a backup using MTK Droid Tools.
Is there a known way to flash a custom recovery on this device?
If i hit Recovery and Boot button in MTK Droid Tools it gives me this error: ERROR :Not read Block: bootimg
Yes
mohamedwinners said:
Yes
Click to expand...
Click to collapse
What is the "Yes" for? You managed to flash a custom recovery?
spithash said:
So, i made a backup using MTK Droid Tools.
Is there a known way to flash a custom recovery on this device?
If i hit Recovery and Boot button in MTK Droid Tools it gives me this error: ERROR :Not read Block: bootimg
Click to expand...
Click to collapse
You can flash it with SP flash tool. Read all my post first and then act.
Open the app, hit "scatter-loading" button, choose your droid tool-creater scatter file with the name of the cpu mt8127 (make sure you have the exctracted rom backup with it), then wait a few secs till the app done loading the files, check if the check boxes are checked and loaded with the appropriate image files as shown in the image.
Leave any unchecked box as is. Make sure to rename factory_NONmodified_recovery.img to recovery.img before doing the above process, or else the program won't load it automatically.
Then, press the green download arrow and connect the device switched off and the process will start automatically.
I can't guarantee the success of the process because I haven't try it yet, but I know that this process is correct for this type of devices.
So, you can take the risk if you want (if it's bricked already, you won't have anything to lose I guess) and you can give as feedback.
dam85 said:
You can flash it with SP flash tool. Read all my post first and then act.
Open the app, hit "scatter-loading" button, choose your droid tool-creater scatter file with the name of the cpu mt8127 (make sure you have the exctracted rom backup with it), then wait a few secs till the app done loading the files, check if the check boxes are checked and loaded with the appropriate image files as shown in the image.
Leave any unchecked box as is. Make sure to rename factory_NONmodified_recovery.img to recovery.img before doing the above process, or else the program won't load it automatically.
Then, press the green download arrow and connect the device switched off and the process will start automatically.
I can't guarantee the success of the process because I haven't try it yet, but I know that this process is correct for this type of devices.
So, you can take the risk if you want (if it's bricked already, you won't have anything to lose I guess) and you can give as feedback.
Click to expand...
Click to collapse
I think my backup is not right, there are many files missing. I tried several times.
Follow this guide http://forum.xda-developers.com/showthread.php?p=38337401
dam85 said:
Follow this guide http://forum.xda-developers.com/showthread.php?p=38337401
Click to expand...
Click to collapse
Create scatter file in MTK Tools is greyed out
spithash said:
Create scatter file in MTK Tools is greyed out
Click to expand...
Click to collapse
Edit the config file, remove every other mt entries and add the 8127 and try again
I've attached mine, if you want to use it.
dam85 said:
Edit the config file, remove every other mt entries and add the 8127 and try again
I've attached mine, if you want to use it.
Click to expand...
Click to collapse
i managed to create a scatter file from the firmware.info from backup using MTK Rom Studio but it doesn't seem right:
Edit: It gives me the same scatter file if i add the 8127.
---------- Post added at 05:17 PM ---------- Previous post was at 05:11 PM ----------
dam85 said:
I've attached mine, if you want to use it.
Click to expand...
Click to collapse
When i open yours is the same as mine.

Categories

Resources