Database Info

[ROM] [Firmware] QMobile A10 Noir - Jelly Bean Update 4.1.1 - Everything You Need

free photo hosting
photo sharing sites
New Jelly Bean update for QMobile Noir A10 (14-03-2013)
Guys ! The Auto Rotate Issue Has Been Fixed in Jelly Bean Rom u Can Download it from the following link.
Download Link: QMobile_A10_JellyBean_Update(13-03-2013).zip
Update Features:
Auto Rotate Issue Fixed
Jelly Bean 4.1.1 ROM
Rooted
Deodexed
Very fast and smooth.
How to install:
DO AT YOUR OWN RISK!!!
1. Reboot into cwm recovery if don't have cwm then install it first.
2. Wipe data/factory reset.
3. Wipe cache.
4. In mounts and storage select format system.
5. In advanced menu wipe dalvick cache.
6. Once all the wiping is done, select install zip from sd-card and select mobile_a10_jellybean.zip
Once complete reboot and enjoy!!!
Old ROM Link
Download Link: QMobile_A10_JellyBean_Rom.zip
Features:
Jelly Bean 4.1.1 ROM
Rooted
Deodexed
Very fast and smooth.
Bugs:
Auto Rotate Not Working....
How to install:
1. Reboot into cwm recovery if don't have cwm then install it first.
2. Wipe data/factory reset.
3. Wipe cache.
4. In mounts and storage select format system.
5. In advanced menu wipe dalvick cache.
6. Once all the wiping is done, select install zip from sd-card and select mobile_a10_jellybean.zip
Once complete reboot and enjoy!!!
QMobile Noir A10
How To Root QMobile A10 Noir
First of all Lets start with the root process.
1. Download the following file.
Root_with_Restore_by_Bin4ry_v15.7z
2. Enable USB Debugging on your device to do that goto Settings>Development>USB Debugging
3. Connect your device to any laptop/PC and install drivers using PDANet
4. Unzip the root tool downloaded above.
5. Change the Mode of your device from USB Storage to Media Device to proceed further.
6. Run the Runme.bat file as shown below.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
7. A command prompt with green letters will come up on your screen.
8. Follow the onscreen instructions carefully. To start off, you willl need to type in a "1" and press enter.
Note: If you ever want to Unroot your QMobile A10, follow the above steps till you reach this one and then, instead of typing "1", type "x" and hit enter. Follow the instructions that appear on the command prompt after that.
9. Your device will reboot during the process after which Bin4ry will copy some files to your device.
10. When the green letters in the command prompt says Have Fun!, then... Have fun.
That means, your device is rooted now and you can enjoy Superuser permissions!
------------------------------------------------------------------------------------------------------------------------------------------------------------
Install CWM Recovery on QMobile Noir A10
1. Download cwm recovery from the given link cwm_Recovery_QMobile_Noir_A10
2. Extract it, rename it to recovery.img & transfer it to the root of your SD Card.
3. Download and install MobileUncle MTK Tools from Google Play Store and run it.
4. Select the option recovery update from the application and when it ask for path guide it to the location where u copied the downloaded recovery file.
5. It will install and upon successfull installation it will ask you to reboot into recovery, select OK to go to newly insalled cwm recovery to confirm the installation.
6. If anything goes wrong you can download and install Stock Recovery For QMobile Noir A10 by using the above mentioned process again to revert back all the changes.
--------------------------------------------------------------------------------------------------------------------------------------------------------
GPS Fix For QMobile Noir A10 for faster Lock
1. First of all you need a rooted QMobile Noir A10.
2. Download the modified gps.conf file from Here.
3. Browse to system/etc using root explorer and mount the system as read / write using the button present on top right of screen.
4. You will find a file gps.conf already present in the folder. Rename that file to gps.conf.bak, it will act as a backup for the original file.
5. Unzip the file you downloaded in Step 2, and copy the extracted gps.conf file to system/etc.
6. Reboot your Qmobile Noir A10.
7. Download GPS Test from Google Play Store and test your GPS now. (activate your gps first)
You will notice the improvement in getting GPS Lock Now.....
Enjoy............

All the info shared here comes from my blog here http://qmobilea10.blogspot.com
Sent from my A10 using Tapatalk 2

Your instructions are a bit wrong.
For this tool to work, the device needs to be detectable in ADB (you can check by typing 'adb devices' in command prompt).
If you follow STEP 5, this won't be possible and the rooting process won't be able to start.
Step 5 needs to be ignored. You need to put the device into USB Storage mode for this process to work.

bhaiwala said:
QMobile Noir A10
How To Root QMobile A10 Noir
First of all Lets start with the root process.
1. Download the following file.
Root_with_Restore_by_Bin4ry_v15.7z
2. Enable USB Debugging on your device to do that goto Settings>Development>USB Debugging
3. Connect your device to any laptop/PC and install drivers using PDANet
4. Unzip the root tool downloaded above.
5. Change the Mode of your device from USB Storage to Media Device to proceed further.
6. Run the Runme.bat file as shown below.
7. A command prompt with green letters will come up on your screen.
8. Follow the onscreen instructions carefully. To start off, you willl need to type in a "1" and press enter.
Note: If you ever want to Unroot your QMobile A10, follow the above steps till you reach this one and then, instead of typing "1", type "x" and hit enter. Follow the instructions that appear on the command prompt after that.
9. Your device will reboot during the process after which Bin4ry will copy some files to your device.
10. When the green letters in the command prompt says Have Fun!, then... Have fun.
That means, your device is rooted now and you can enjoy Superuser permissions!
------------------------------------------------------------------------------------------------------------------------------------------------------------
Install CWM Recovery on QMobile Noir A10
1. Download cwm recovery from the given link cwm_Recovery_QMobile_Noir_A10
2. Extract it, rename it to recovery.img & transfer it to the root of your SD Card.
3. Download and install MobileUncle MTK Tools from Google Play Store and run it.
4. Select the option recovery update from the application and when it ask for path guide it to the location where u copied the downloaded recovery file.
5. It will install and upon successfull installation it will ask you to reboot into recovery, select OK to go to newly insalled cwm recovery to confirm the installation.
6. If anything goes wrong you can download and install Stock Recovery For QMobile Noir A10 by using the above mentioned process again to revert back all the changes.
--------------------------------------------------------------------------------------------------------------------------------------------------------
GPS Fix For QMobile Noir A10 for faster Lock
1. First of all you need a rooted QMobile Noir A10.
2. Download the modified gps.conf file from Here.
3. Browse to system/etc using root explorer and mount the system as read / write using the button present on top right of screen.
4. You will find a file gps.conf already present in the folder. Rename that file to gps.conf.bak, it will act as a backup for the original file.
5. Unzip the file you downloaded in Step 2, and copy the extracted gps.conf file to system/etc.
6. Reboot your Qmobile Noir A10.
7. Download GPS Test from Google Play Store and test your GPS now. (activate your gps first)
You will notice the improvement in getting GPS Lock Now.....
Enjoy............
Click to expand...
Click to collapse
i have already root my a10 and come to xda post the mathod and find ur post u already done as i buy this phone some days before u posted the method for macromax a110 the same spec every t same as qmobile noir a10 and thx for it em happi tht peoples working this kinda stuf in pakistan and i need som devolper who devolp sum custom roooms for a10 and micromax as well..
for noir 10 follow my post..
fisrt of all thx brother for ur post follow 1st post of bahiwala
1 download the file Root_with_Restore_by_Bin4ry_v15.7z
2. Enable USB Debugging on your device to do that goto Settings>Development>USB Debugging(as it should be enabled but check it if u disabled it...)
3.. just ignore tht driver download step and install QMobilePCTool its provided in cd wid box install it and connect ur phone with usb cable and dropdown the notification bar and select the connect 2 media storage if its a usb storage then leave it now open ur QMobilePCTool and then choice ur devic click on refresh now a10 comes up selct it and install the drivers for a10..
4..extraxt the Root_with_Restore_by_Bin4ry_v15.7z with winrar aur 7 zip u like then run the file runme.bat and type 1 from keyboard and entr it
and then follow the instuction for restore and phone must be restart atleast 2 tyme..... and its done now youre rooted
Why we need 2 rooot we can instaal custum rooms backup the orignal stock room and over clock the processor and use sum apps like screenshot apps for take the screeen shot and etc enjoy msg me if any problem......

can we run jelly bean on QMobile Noia A-10
Hi,
Bhaiwala and all other friends, kindly some one tell me can we update our QMobile Noir A-10 on JELLY BEAN???

Farri i dnt think so tht we can yeah in a way we can update it as we if flash custum room of jely bean it will take some tyme but i think we dnt have radio framw as 4.0 custum rooms when i flash one its work grat sum extra animation goood battry more battry bakup more fast but my signals was vaishd sooo i restore my stock room sooo the problm is radio as this rooot mathod is for micromax in india they use 3g network mostly and there frequency are not same like pakistan as i googled it sooo tht make signal go ad i seaching for a long tyme for radio but em not able 2 find there is sym light for 4.1 but sum problems...........................

Any custom rom for qmobile noir a6?
Sent from my Qmobile A6 using xda app-developers app

Any way to install custom rom on Qmobile A2?

Hi.. I want to ask some questions.. If I only root my my phone nd do not install clockward mode.. then can i unroot my phone? and it will be unrooted as like was original?

Re: QMobile A10 Noir - Everything You Need - Rooting - CWM Recovery - GPS FIX
When u root ur phone it displays two options, one is root and second option is to unroot ur device. Even after installing cwm u can revert back to stock recovery anytime.
Sent from my Micromax Canvas 2 using Tapatalk 2

Re: QMobile A10 Noir - Everything You Need - Rooting - CWM Recovery - GPS FIX
farri613 said:
Hi,
Bhaiwala and all other friends, kindly some one tell me can we update our QMobile Noir A-10 on JELLY BEAN???
Click to expand...
Click to collapse
No update yet for our qmobile a10. But there is a jelly bean update on the way for micromax a110.
Sent from my Micromax Canvas 2 using Tapatalk 2

gps
i think gps issue is still not resolved by doing your method, but thanks to bhaiwala and lonely , i have my qmobile rooted now ...

Re: QMobile A10 Noir - Everything You Need - Rooting - CWM Recovery - GPS FIX
salluhassan said:
i think gps issue is still not resolved by doing your method, but thanks to bhaiwala and lonely , i have my qmobile rooted now ...
Click to expand...
Click to collapse
Bro!
t first time GPS fix takes some time. Try it with all options selected under location settings
Sent from my Nexus 7 using Tapatalk HD

Stock rom
bhaiwala said:
QMobile Noir A10
How To Root QMobile A10 Noir
First of all Lets start with the root process.
1. Download the following file.
Root_with_Restore_by_Bin4ry_v15.7z
2. Enable USB Debugging on your device to do that goto Settings>Development>USB Debugging
3. Connect your device to any laptop/PC and install drivers using PDANet
4. Unzip the root tool downloaded above.
5. Change the Mode of your device from USB Storage to Media Device to proceed further.
6. Run the Runme.bat file as shown below.
7. A command prompt with green letters will come up on your screen.
8. Follow the onscreen instructions carefully. To start off, you willl need to type in a "1" and press enter.
Note: If you ever want to Unroot your QMobile A10, follow the above steps till you reach this one and then, instead of typing "1", type "x" and hit enter. Follow the instructions that appear on the command prompt after that.
9. Your device will reboot during the process after which Bin4ry will copy some files to your device.
10. When the green letters in the command prompt says Have Fun!, then... Have fun.
That means, your device is rooted now and you can enjoy Superuser permissions!
------------------------------------------------------------------------------------------------------------------------------------------------------------
Install CWM Recovery on QMobile Noir A10
1. Download cwm recovery from the given link cwm_Recovery_QMobile_Noir_A10
2. Extract it, rename it to recovery.img & transfer it to the root of your SD Card.
3. Download and install MobileUncle MTK Tools from Google Play Store and run it.
4. Select the option recovery update from the application and when it ask for path guide it to the location where u copied the downloaded recovery file.
5. It will install and upon successfull installation it will ask you to reboot into recovery, select OK to go to newly insalled cwm recovery to confirm the installation.
6. If anything goes wrong you can download and install Stock Recovery For QMobile Noir A10 by using the above mentioned process again to revert back all the changes.
--------------------------------------------------------------------------------------------------------------------------------------------------------
GPS Fix For QMobile Noir A10 for faster Lock
1. First of all you need a rooted QMobile Noir A10.
2. Download the modified gps.conf file from Here.
3. Browse to system/etc using root explorer and mount the system as read / write using the button present on top right of screen.
4. You will find a file gps.conf already present in the folder. Rename that file to gps.conf.bak, it will act as a backup for the original file.
5. Unzip the file you downloaded in Step 2, and copy the extracted gps.conf file to system/etc.
6. Reboot your Qmobile Noir A10.
7. Download GPS Test from Google Play Store and test your GPS now. (activate your gps first)
You will notice the improvement in getting GPS Lock Now.....
Enjoy............
Click to expand...
Click to collapse
CAN YOU PLEASE PROVIDE ME WITH THE STOCK ROM (cwm backup) I HAVE MESSED UP MY CAMERA AND REALLY NEED THE STOCK ROM

Can somebody please upload the stock backup files so that i can restore from it(my phone is messed up) or please upload your "system" folder pleae

System.img and nandroid.md5 required, please upload these files, get from gscript or cwm backup

Re: QMobile A10 Noir - Everything You Need - Rooting - CWM Recovery - GPS FIX
U can just flash micromax a110 roms on ur device
*Sent_From _Qmobile_Noir_A8*

well now i dont need the full backup, please anybody just go into your system folder and inside there is "lib" folder. I just need the lib folder please
---------- Post added at 02:26 PM ---------- Previous post was at 02:14 PM ----------
shantam said:
U can just flash micromax a110 roms on ur device
*Sent_From _Qmobile_Noir_A8*
Click to expand...
Click to collapse
bro i want to remain on stock qmobile, would you be kind enough to use root browser to navigate to your system folder and then share your "lib" folder
"system\lib" it is required to bring my camera to life
please

Need help please
I have problem in step 4
When i extract the Root_with_Restore_by_Bin4ry_v15.7z and run cmd command open and when i select 1 the problem occurred says " THE SYSTEM CANNOT FIND THE PATH SPECIFIED"
PLEASE HELP ME
i try every possible way to work this out but it couldn't i even install pdanet but still didnt work.
I need a possible solution that where did i go wrong.
Thanks

Jelly Bean Update for QMobile Noir A10
Good News for all Qmobile A10 users!!
Jelly Bean Update is available for QMobile Noir A10. Link added in first post.
Download from first Post & update your phone.:good::good:

Everything For Micromax A110 Canvas 2

Everything for A110
ROMS:
Stock:
Stock ROM V1 - http://d-h.st/NOR
Stock ROM V2 - http://d-h.st/0lp
Mobistel Cynus T2 ROM - http://www.sendspace.com/file/usu6q7 (Flashable zip)
Flash tool - http://goo.gl/4tyQ5
Custom ROMS:
JMP Xtream - http://bit.ly/ZacyS2
Dr.Bhokali ROM - http://bit.ly/Zrslki
Radeon ROM - http://d-h.st/PnP
Drivers:
http://bit.ly/13bkuq2
Rooting:
Rooting Tool - http://bit.ly/WAuST3
1. Enable USB De-bugging from Settings- Developer Options - USB Debugging
2. Download and Extract the Rooting tool in a single folder
3. Make sure the Drivers are installed
4. Right click on the 'Runme.bat' in the rooting tool and click 'Run as Administrator'
5. Connect the device and press '1'
6. Wait for the process to complete
Recovery:
Stock - http://bit.ly/137WVzj
Clockworkmod - http://bit.ly/WidRft
1. Download 'Mobile Uncle Tools' from Play Store.
2. Make sure your Phone is rooted
3. Rename the recovery you want to flash to 'recovery.img' and place it in the root of
your SD card.
4. Select 'Recovery Update' in 'MUT' and select the recovery.img from the list.
Storage Swapping:
Download - http://d-h.st/LFT
1. Install 'Root Explorer'
2. Using Root Explorer go to /system/etc and rename the file 'vold.fstab' to 'vold.fstab.bak'
3. Paste the downloaded 'vold.fstab' file to /system/etc and give system permissions
4. Reboot!
init.d Support (Required to run Supercharger):
1. Download 'Busybox Insatller' from Play Store.
2. Install Busybox 1.18.2 from 'Busybox Installer'
3. Download 'Script Manager' from Play Store.
4. Using 'Root Explorer' create a folder in the name of 'init.d' in /system/etc and give system permissions
5. Download the script from this link - http://bit.ly/WBY4ca
6. Open 'Script manager and browse to this script and run it as 'Superuser'
7. Reboot!
SuperCharger (After Enabling init.d):
1. Download Supercharger script - http://bit.ly/oBhiFg
2. Open 'Script Manager' and browse to the downloaded script.
3. Run it as Super user and the select the option you want
4. Reboot!
Entropy Seeder:
Use this to enhance your gaming experience and smoothness
1. Download Seeder Entropy - http://bit.ly/13bnMtm
2. Then flash this Zip through CWM - http://bit.ly/Uv8Fuy
3. Wipe cache and Dalvik Cache.
4. Reboot!.
12mp Camera Patch:
Flash via CWM this to use 12mp rear and 1.3mp front camera - http://bit.ly/Williy
Credits go to many. As of now I reckon Dileep Vargese and 'Droidiser.in'. If anyone knows, bring to my notice please.
Will be updated when more comes in
Pinocchio's nose grew with lies. My knowledge grows with 'Thanks' . Help it grow please
Facebook Support Group - https://www.facebook.com/groups/Micromaxcanvas2

kishoredroid said:
Everything for A110
ROMS:
Stock:
Stock ROM V1 - http://d-h.st/NOR
Stock ROM V2 - http://d-h.st/0lp
Mobistel Cynus T2 ROM - http://www.sendspace.com/file/usu6q7 (Flashable zip)
Flash tool - http://goo.gl/4tyQ5
Custom ROMS:
JMP Xtream - http://bit.ly/ZacyS2
Dr.Bhokali ROM - http://bit.ly/Zrslki
DZire ROM - http://bit.ly/TT21dQ
Drivers:
http://bit.ly/13bkuq2
Rooting:
Rooting Tool - http://bit.ly/WAuST3
1. Enable USB De-bugging from Settings- Developer Options - USB Debugging
2. Download and Extract the Rooting tool in a single folder
3. Make sure the Drivers are installed
4. Right click on the 'Runme.bat' in the rooting tool and click 'Run as Administrator'
5. Connect the device and press '1'
6. Wait for the process to complete
Recovery:
Stock - http://bit.ly/137WVzj
Clockworkmod - http://bit.ly/WidRft
1. Download 'Mobile Uncle Tools' from Play Store.
2. Make sure your Phone is rooted
3. Rename the recovery you want to flash to 'recovery.img' and place it in the root of
your SD card.
4. Select 'Recovery Update' in 'MUT' and select the recovery.img from the list.
Storage Swapping:
Download - http://d-h.st/LFT
1. Install 'Root Explorer'
2. Using Root Explorer go to /system/etc and rename the file 'vold.fstab' to 'vold.fstab.bak'
3. Paste the downloaded 'vold.fstab' file to /system/etc and give system permissions
4. Reboot!
init.d Support (Required to run Supercharger):
1. Download 'Busybox Insatller' from Play Store.
2. Install Busybox 1.18.2 from 'Busybox Installer'
3. Download 'Script Manager' from Play Store.
4. Using 'Root Explorer' create a folder in the name of 'init.d' in /system/etc and give system permissions
5. Download the script from this link - http://bit.ly/WlCPL6
6. Open 'Script manager and browse to this script and run it as 'Superuser'
7. Reboot!
SuperCharger (After Enabling init.d):
1. Download Supercharger script - http://bit.ly/oBhiFg
2. Open 'Script Manager' and browse to the downloaded script.
3. Run it as Super user and the select the option you want
4. Reboot!
Entropy Seeder:
Use this to enhance your gaming experience and smoothness
1. Download Seeder Entropy - http://bit.ly/13bnMtm
2. Then flash this Zip through CWM - http://bit.ly/Uv8Fuy
3. Wipe cache and Dalvik Cache.
4. Reboot!.
12mp Camera Patch:
Flash via CWM this to use 12mp rear and 1.3mp front camera - http://bit.ly/Williy
Credits go to many. As of now I reckon Dileep Vargese and 'Droidiser.in'. If anyone knows, bring to my notice please.
Will be updated when more comes in
Pinocchio's nose grew with lies. My knowledge grows with 'Thanks' . Help it grow please
Click to expand...
Click to collapse
Keep it up Good Going :good:
sorry for that (2 more rom in the treat)
i have one rom link
(Radeon™Rom : eXperience NXT)
http://forum.xda-developers.com/showthread.php?t=1981834

afzi said:
Keep it up Good Going :good:
sorry for that (2 more rom in the treat)
i have one rom link
(Radeon™Rom : eXperience NXT)
http://forum.xda-developers.com/showthread.php?t=1981834
Click to expand...
Click to collapse
radeon was not fully functional.. i will confirm with acervenky and if its ready for daily use, i will add it

Give the right way
kishoredroid said:
radeon was not fully functional.. i will confirm with acervenky and if its ready for daily use, i will add it
Click to expand...
Click to collapse
okes thanks for replay
i hope u used already thus three rom
can tell me, how i instal
Dzire Rom
http://forum.xda-developers.com/showthread.php?t=2043517]
couple of time i was install DZIRE ROM AND GO TO CUSTOM RECOVERY SELECT AND TRY TO INSTALL
BUT ITS FAIL
HOW CAN U USED OR INSTALL CAN U TELL ME
I WANT THIS ROM BECAUSE ITS MIUI BASED ROM

very informative post, my device is not detecting on my pc after installing custom rom. i am browsing sd card via using mobile go. can anyone help me to make it back to stock
thanks in advance
regards,
sunil:crying:

afzi said:
okes thanks for replay
i hope u used already thus three rom
can tell me, how i instal
Dzire Rom
http://forum.xda-developers.com/showthread.php?t=2043517]
couple of time i was install DZIRE ROM AND GO TO CUSTOM RECOVERY SELECT AND TRY TO INSTALL
BUT ITS FAIL
HOW CAN U USED OR INSTALL CAN U TELL ME
I WANT THIS ROM BECAUSE ITS MIUI BASED ROM
Click to expand...
Click to collapse
This ROM does not work. so removing it from the post.

sunilnair007 said:
very informative post, my device is not detecting on my pc after installing custom rom. i am browsing sd card via using mobile go. can anyone help me to make it back to stock
thanks in advance
regards,
sunil:crying:
Click to expand...
Click to collapse
Which ROM did you flash. BTW you can flash any of the stock ROMs from the post.

Removed system file from Micromax A110
Hi,
i was trying to do some changes to my micromax A110(android ics 4.0.4) with root access.
In an attempt to take a backup, i accidentally renamed /system/framework/framework.jar to /system/framework/framework.jar_old
Now the phone is not booting, i do not have CWM or other reflash tools.
I tried reflashing some ROM images, but they all fail with message: "Signature verification failed"
Is there someway i can regain access to the phone?
~Shailendra Kumar

maverick083 said:
Hi,
i was trying to do some changes to my micromax A110(android ics 4.0.4) with root access.
In an attempt to take a backup, i accidentally renamed /system/framework/framework.jar to /system/framework/framework.jar_old
Now the phone is not booting, i do not have CWM or other reflash tools.
I tried reflashing some ROM images, but they all fail with message: "Signature verification failed"
Is there someway i can regain access to the phone?
~Shailendra Kumar
Click to expand...
Click to collapse
Did you try flashing stock ROM V2 with the flash tool in the post? That will rewrite everything.

kishoredroid said:
Which ROM did you flash. BTW you can flash any of the stock ROMs from the post.
Click to expand...
Click to collapse
as on date i am using Radeaon rom v1 but my problem is same, pc is not resolving y phone. it only charging with usb cable. please help
:crying:
sunil

sunilnair007 said:
as on date i am using Radeaon rom v1 but my problem is same, pc is not resolving y phone. it only charging with usb cable. please help
:crying:
sunil
Click to expand...
Click to collapse
Cant get what you are trying to say. But download and install the drivers from the given link and try flashing your phone to stock ROM V2

Guys who would like to try out xperia launcher for their handsets can visit :
http://forum.xda-developers.com/showthread.php?t=2095956

Recovery not working
Last night i tried to get back to stock recovery so i restored it with MUT and when i went to recovery it didn't showed up. So i tried to get back in cwm recovery and it was also with the same result "Black screen" . My stock rom is working perfectly. Can anyone help me what to do as i want to install the T2 rom? Can we install it with flash tool?

Can the camera patch file should be installed in cwm or stock memory?
I am using jmp xtreme rom now.
Sent from my Samsung GT-S9081 using xda app-developers app

The stock V2 ROM..!
Can you please tell me if I have successfully updated or not here are my screen shots.....The orange signal for SIM1 is it correct? please help

nehalchoraria said:
Last night i tried to get back to stock recovery so i restored it with MUT and when i went to recovery it didn't showed up. So i tried to get back in cwm recovery and it was also with the same result "Black screen" . My stock rom is working perfectly. Can anyone help me what to do as i want to install the T2 rom? Can we install it with flash tool?
Click to expand...
Click to collapse
you cannot flah T2 via flash tool. go to /system/recovery-from-boot.p and rename it to 'recovery-from-boot.p.bak' and then try to flash stock recovery from MUT

violin.siva said:
Can the camera patch file should be installed in cwm or stock memory?
I am using jmp xtreme rom now.
Sent from my Samsung GT-S9081 using xda app-developers app
Click to expand...
Click to collapse
Flash it through CWM recovery

Arnav06 said:
Can you please tell me if I have successfully updated or not here are my screen shots.....The orange signal for SIM1 is it correct? please help
Click to expand...
Click to collapse
Yes.. you successfully flashed V2!

Cynus T2 ROM
I upgraded my A110 to Cynus T2 Yesterday from V2 ROM, and backup of userdata was taken immediately. Later, Factory Reset was done, and the problems started coming.
1) Default language changed to German, and the same was later changed to English by guessing the language menu.
2) The second major bottle neck was that there was no SIM connectivity to 2G network, either in SIM1 or SIM2. I tried everything possible, but failed.
3) My WIN7 laptop is now unable to detect my A110 in Switched OFF state with USB Debugging ON. As, a result, I am not able to flash back V2 ROM.
As a last resort, the previously saved user data was restored, and my A110 started working like a charm. Both the SIMs functional, and other features as per expectation. However, a factory reset will spoil every thing. Even now, my Laptop does not detect A110.
Kindly suggest how to revert back to V2 ROM.

JogyGeorge said:
I upgraded my A110 to Cynus T2 Yesterday from V2 ROM, and backup of userdata was taken immediately. Later, Factory Reset was done, and the problems started coming.
1) Default language changed to German, and the same was later changed to English by guessing the language menu.
2) The second major bottle neck was that there was no SIM connectivity to 2G network, either in SIM1 or SIM2. I tried everything possible, but failed.
3) My WIN7 laptop is now unable to detect my A110 in Switched OFF state with USB Debugging ON. As, a result, I am not able to flash back V2 ROM.
As a last resort, the previously saved user data was restored, and my A110 started working like a charm. Both the SIMs functional, and other features as per expectation. However, a factory reset will spoil every thing. Even now, my Laptop does not detect A110.
Kindly suggest how to revert back to V2 ROM.
Click to expand...
Click to collapse
Im on T2, no niggles. And it is getting detected without issues on the same win 7. When you connect your phone in factory mode, t2 will be recognized.

[Rom] Jelly Bean 4.1.1 for Qmobile Noir A8 by INCPak

Good things comes to those who wait - Yes now you can have AOSP Jelly Bean 4.1.1 on your Noir A8, previously we released LeWa and TouchWiz which been the most outstanding Roms but ICS 4.0.4 OS but this time JB 4.1.1
For the Screenshots : Check out this post: http://www.incpak.com/tech/qmobile-noir-a8-jellybean-4-1-1/
Ubaid ur Rehman Khan did it since today it’s his birthday too special thanks to Ali Akber who cooperated all the way to make it possible and I would like to congrats entire INCPak Team for this. In our previous Roms you checked JB Camera and Gallery ( TouchWiz ) and in LeWa the outstanding Music Player as well as SRS effects.
INCPak IS NOT RESPONSIBLE FOR ANY KIND OF DAMAGE TO YOUR PHONE, IF YOU MADE ANY MISTAKE.
NOTE: FLASH AT YOUR OWN RISK !!!
This is a Flash-able Zip file that can be flashed only from ClockWorkMod Recovery ( CWMR ) . Make sure that your phone is ROOTED before Installing ClockWorkMod Recovery. If your phone is not ROOTED than first Root Procedure and require files are there on the post click the post below:
http://www.incpak.com/alerts/root-method-qmobile-noir-a8/
And for Installing CWMR
1) Download MobileUncle MTKTools from play store.
2) Download CMWR file from either of these links.
Link I( Recovery.img )
Link II ( RECOVERY.IMG )
3) Copy CMWR(Recovery.img) to your SD card.
4) Open MobileUncle MTKTools software, select recovery update option and then select recovery.img file that you copied in to SD.
For flashing Rom follow these steps very carefully:
1) Download the ROM. (http://www.incpak.com/tech/asop-jelly-bean-4-1-1-for-no)
2. Copy the downloaded file on your SD-CARD.
3. Power off your phone.
4. Turn your phone on in recovery mode (by pressing VOLUME UP + POWER buttons).
5. Make a backup.
Select “backup and restore”. And then select “backup”. When it is done select “Go Back”.
6. Select Wipe/Data Factory Cache.
7. Select Wipe Cache Partition.
8. Go to advanced and select wipe dalvik cache.
9. Go back to the main menu.
10. Select “Install zip from sdcard” –> “Choose zip from sdcard” –> Now select “A8_4.1.1_INCPak_Fixed” –> Select ”Yes”
11. Phone will reboot itself into Jellybean.

Battery Draining issue!
What about the battery draining issue in JB rom? there is a post in INCPak that suggests not to use JB rom!

ubaid88 said:
Good things comes to those who wait - Yes now you can have AOSP Jelly Bean 4.1.1 on your Noir A8, previously we released LeWa and TouchWiz which been the most outstanding Roms but ICS 4.0.4 OS but this time JB 4.1.1
For the Screenshots : Check out this post: http://www.incpak.com/tech/qmobile-noir-a8-jellybean-4-1-1/
Ubaid ur Rehman Khan did it since today it’s his birthday too special thanks to Ali Akber who cooperated all the way to make it possible and I would like to congrats entire INCPak Team for this. In our previous Roms you checked JB Camera and Gallery ( TouchWiz ) and in LeWa the outstanding Music Player as well as SRS effects.
INCPak IS NOT RESPONSIBLE FOR ANY KIND OF DAMAGE TO YOUR PHONE, IF YOU MADE ANY MISTAKE.
NOTE: FLASH AT YOUR OWN RISK !!!
This is a Flash-able Zip file that can be flashed only from ClockWorkMod Recovery ( CWMR ) . Make sure that your phone is ROOTED before Installing ClockWorkMod Recovery. If your phone is not ROOTED than first Root Procedure and require files are there on the post click the post below:
http://www.incpak.com/alerts/root-method-qmobile-noir-a8/
And for Installing CWMR
1) Download MobileUncle MTKTools from play store.
2) Download CMWR file from either of these links.
Link I( Recovery.img )
Link II ( RECOVERY.IMG )
3) Copy CMWR(Recovery.img) to your SD card.
4) Open MobileUncle MTKTools software, select recovery update option and then select recovery.img file that you copied in to SD.
For flashing Rom follow these steps very carefully:
1) Download the ROM. (http://www.incpak.com/tech/asop-jelly-bean-4-1-1-for-no)
2. Copy the downloaded file on your SD-CARD.
3. Power off your phone.
4. Turn your phone on in recovery mode (by pressing VOLUME UP + POWER buttons).
5. Make a backup.
Select “backup and restore”. And then select “backup”. When it is done select “Go Back”.
6. Select Wipe/Data Factory Cache.
7. Select Wipe Cache Partition.
8. Go to advanced and select wipe dalvik cache.
9. Go back to the main menu.
10. Select “Install zip from sdcard” –> “Choose zip from sdcard” –> Now select “A8_4.1.1_INCPak_Fixed” –> Select ”Yes”
11. Phone will reboot itself into Jellybean.
Click to expand...
Click to collapse
I tested it personally its very nice stable fast rom but with less memory. Pls inform me when get its update

azhar63 said:
I tested it personally its very nice stable fast rom but with less memory. Pls inform me when get its update
Click to expand...
Click to collapse
I'm still using this fantastic rom and want its update. So if any body finds please inform me.

malick186 said:
What about the battery draining issue in JB rom? there is a post in INCPak that suggests not to use JB rom!
Click to expand...
Click to collapse
I don't have any battery draing issue in this fixed ROM

Any method to flash jellybean via odin....

ROOT & CWM Recovery for Qmobile Noir Quatro Z4

Assalam O Alikum,
Hello,
Here after long mind game Alhamdulillah I m sucessfully port CWM Recovery in Z4, Here I M presenting you Root method and CWM Recovery for Qmobile Noir Quatro Z4. CWM Recovery, I was flash via SP-Flash Tool. Both are working perfectly at my device.
How To Root Your Device:
1) Download Framaroot rooting application.
2) Install it on your Quatro Z4 phone.
3) Open the app & select “Install super su” from the drop down menu.
4) Then click on Borimor button.
5) You will get a success message “Success Superuser & su binary installed. You have to reboot your device.
6) Press OK. & Restart your phone. :good:
How to Flash CWM Recovery:
This steps should be done after rooting.
1) Download the CWM Recovery file. (downloading should be done from pc as android default browser may not allow downloading .img file. Or use any third party browser like Dolphin, UC etc.)
2) When the download completes connect your phone to pc, turn on USB mass storage & copy the downlaoded recovery.img file to your phone.
3) Now download this Mobile Uncle Tools app.
4) After installing the Mobile Uncle tools apps, open it.
5) Select Recovery Update option & then TAP the recovery.img option on next screen.
6) After that choose Reboot to Recovery.
7) Your phone will now reboot into recovery mode, use Volume UP & down keys to navigate in recovery mode & Power button to select.
8) In recovery mode, navigate to Reboot System Now (probably this first option) & press the Power button. Select YES to confirm it. now your phone will again bootup in normal mode. :good::good::good:
Congo, you have successfully rooted Qmobile Noir Quatro Z4 & installed the CWM Custom Recovery on it. Go & enjoy some rooted apps & games from play store.Make sure to subscribe us bellow or follow me social networks to stay updated with Qmobile Noir Quatro Z4 development.
Framaroot 1.7.0:
Code:
http://d-h.st/eqr
Mobileuncle MTK Tools v2.9.5:
Code:
http://d-h.st/5Oi
CWM Recovery:
Code:
http://d-h.st/vNd
Remember One Thing DO AT YOUR OWN RISK, I M NOT RESPONSIBLE FOR ANY KIND OF BOOT LOOP OR BRICK.​

thnx ..do u have orginal recovery.img in case of emergency?
Sent from my Z4 using xda app-developers app

Has any one of u tried miui rom ported for noir z4..........if yes did u find any lag plz reply its urgent .......decisive role for me to whether buy it or not....plz.....here u go. http://en.miui.com/thread-12119-1-1.html
Sent from my A2_Classic using Tapatalk 2

mobile uncle doesnt pick recovery.img from sdcard, i have put recovery.img in parent directory of sdcard0, what to do now
actually u missed one step, recovery file should be rename by recovery.img ever with capital R, mobile uncle doesnt pick

cmw recovery not sported in my z4 q mobile what i do..

Plzz give a way to root qmobile s4...
Hey bro...
I have bought QMobile s4 but i cannot find any way to root it or flash any recovery to it...plzz give any recovery or working root method....
Many Many Thanks
Hope u will do this sooon..

[Guide] Spice mi 435 ROOT & CWM

View attachment 2923077
Hi Friends i m FAISAL
Today i m going to show you how to ROOT & install CWM Recovery on your SPICE MI-435
Dear friends after lot of searching and testing, i have found a working CWM for mi-435
Do at your own Risk i'll not take Responsibility for any damage
Spice mi-435 root and CWM
So Lets Start
Spice mi-435 Rooting using Root with FramaRoot.apk
1. Make sure that USB debugging is on your device GO TO -->Settings-->Development-->USB debugging
2. Install the apk of FramaRoot & Open it.
3. Tap Aragorn / Gandalf & Click OK
4. Now RESTART Your Phone
5. After that Your device will reboot Then you will be able to se SuperSU icon on your app drawer of phone.
NOW YOUR SPICE MI 435 IS ROOTED :laugh::laugh:
DOWNLOAD LINK::
FramaRoot --> http://d-h.st/NIY
CMW --> http://d-h.st/1NW
Terminal Emulator --> http://d-h.st/TMh
Es File Explorer --> Download From PLAYSTORE
Fb --> http://fb.com/MDFAISAL6 :good:
Spice mi 435 CWM intructions
1. First of all download the cwm435.img from The LINK & put it in the ROOT of your sdcard :good:
2. Then Download Terminator Emulator & Install it. :good:
3. Then Download any ROOT EXPLORER APP & Install it. :good:
4. Open root explorer & Go To SYSTEM & Find the file recovery-from.boot.p :good:
5. Rename it to recovery-from.boot.p.bak :good:
6. After completing above step start terminal emulator type su hit enter
7. Write the following CODE.
dd if=/sdcard/cwm435.img of=/dev/block/mmcblk0p16 & Hit Enter. :good:
8. Switch off your phone press the powerkey and volume down key together. :good:
9. That's it you can know see the CWM v.6 recovery. :good:
CHECK HOW TO INSTALL TEAMBURST ROM ON SPICE MI 435
http://forum.xda-developers.com/chef-central/android/teamburst-t2864249 :good: :fingers-crossed:
THANK YOU
PLZZZ HIT THE LITTLE THANX BUTTON IF I REALLY HELPED YOU
MY DEVICE:---
SPICE MI 435
ROOTED USING FRAMAROOT.APK
KERNEL--SPICE INBUILT
OVERLOCKED UPTO 1.5 GHz
||||| MD FAISAL NP ||||

New Blog for Spice mi-435
i have created a new blog for roms of mi-435
please visit @
spicemi435 .blogspot .in(remove spaces)

Bro ..please tell me how to overclock the cpu of spice mi 435...please..
Your response will be appreciated.
Sent from my S280 using XDA Premium 4 mobile app