Database Info

Nothing. delete this.

removed.
318 views and 6 thanx.
go here

Just one question... its for micromax A88... right?
Sent from my Micromax A88 using xda app-developers app

sumgag said:
Just one question... its for micromax A88... right?
Sent from my Micromax A88 using xda app-developers app
Click to expand...
Click to collapse
yes canvas music A88. tested and working. press thanx please.

It worked like charm... thanks bro
Also, can we use speedy droid scrpt for bloatware removal or what is the preffered option???

sumgag said:
It worked like charm... thanks bro
Also, can we use speedy droid scrpt for bloatware removal or what is the preffered option???
Click to expand...
Click to collapse
i removed using titanium backup (i knew which one i've to remove)
can post here list to if you want to.
looking what speedy droid script is.

Check Xperia P section for speedy droid script. I was using sony mobiles earlier...
I used ROM toolbox lite from Jrumm y... Kinda worked however lost will be helpful...
Thanks
Sent from my Micromax A88 using xda app-developers app

help...
Sudeep Duhoon said:
The whole process is working and much similar to canvas 2 on jelly bean. i did all this by myself (by searching internet and porting etc) and i've tried this on my own phone. working.
Downloads:
Drivers
Flash Tool
CWM Recovery for canvas music
TWRP Recovery 2.5 for canvas music
Stock Recovery
UPDATE-SuperSU-v1.04
MT6577_Android_scatter_emmc.txt
Optional: Stock SP Flashable Rom
Procedure:
1. Download everything except the rom (optional)
2. Install drivers and place CWM Recovery and MT6577_Android_scatter_emmc.txt inC: drive. and UPDATE-SuperSU-v1.04.zip in your phone's sd card.
3. Extract and run SP Flasher Options-DA Downlad All-Speed-Force to high speed, check this (enable)
4. Click "scatter-loading' and select MT6577_Android_scatter_emmc.txt from C: drive.
5. Uncheck all options (if checked), click on recovery and chose CWM Recovery.img from C: drive.
6. Click Download, OK on warrning. SP Flasher will search for phone.
7. Now u have to connect your phone to pc when it is powering off. For ease, Connect your phone in charging mode to pc and then power it off.
8. Wait, SP Flasher will recognize your canvas music and will start flashing.
9. A green circle will indicate that the flashing has completed.
10. Disconnect your phone and press Volume Up+ Volume Down+Power on. select recovery to go to CWM Recovery. Or press Volume Up+Power on and select Recovery.
11. Once in CWM Recovery, make a backup. (Optional, Highly recommended)
12. Flash UPDATE-SuperSU-v1.04.zip
13. Reboot.
OR
Replace CWM Recovery with TWRP Recovery if you want TWRP Recovery. Both are tested and working.
Press Thanx. please.
Click to expand...
Click to collapse
I am trying to follow ur guide i am able to get to the step where we have to connect the phone and switch off but my phone is not recognised and the tool stays searching for phone. anything i am doing wrong here

You need to have the VIA COM USB drivers installed for the computer to recognise the preloader...
I guess he forgot to add that step...

dextrorotatrix said:
You need to have the VIA COM USB drivers installed for the computer to recognise the preloader...
I guess he forgot to add that step...
Click to expand...
Click to collapse
i didn't installed any peloader drivers (window installed it from internet by itself).
you can google drivers easily.

Sudeep Duhoon said:
The whole process is working and much similar to canvas 2 on jelly bean. i did all this by myself (by searching internet and porting etc) and i've tried this on my own phone. working.
Downloads:
Drivers
Flash Tool
CWM Recovery for canvas music
TWRP Recovery 2.5 for canvas music
Stock Recovery
UPDATE-SuperSU-v1.04
MT6577_Android_scatter_emmc.txt
Optional: Stock SP Flashable Rom
Procedure:
1. Download everything except the rom (optional)
2. Install drivers and place CWM Recovery and MT6577_Android_scatter_emmc.txt inC: drive. and UPDATE-SuperSU-v1.04.zip in your phone's sd card.
3. Extract and run SP Flasher Options-DA Downlad All-Speed-Force to high speed, check this (enable)
4. Click "scatter-loading' and select MT6577_Android_scatter_emmc.txt from C: drive.
5. Uncheck all options (if checked), click on recovery and chose CWM Recovery.img from C: drive.
6. Click Download, OK on warrning. SP Flasher will search for phone.
7. Now u have to connect your phone to pc when it is powering off. For ease, Connect your phone in charging mode to pc and then power it off.
8. Wait, SP Flasher will recognize your canvas music and will start flashing.
9. A green circle will indicate that the flashing has completed.
10. Disconnect your phone and press Volume Up+ Volume Down+Power on. select recovery to go to CWM Recovery. Or press Volume Up+Power on and select Recovery.
11. Once in CWM Recovery, make a backup. (Optional, Highly recommended)
12. Flash UPDATE-SuperSU-v1.04.zip
13. Reboot.
OR
Replace CWM Recovery with TWRP Recovery if you want TWRP Recovery. Both are tested and working.
Press Thanx. please.
Click to expand...
Click to collapse
Can we insall Canvas 2 a110 Roms on canvas music ?
As both have same resolution i.e. 480*845 !!

kaml said:
Can we insall Canvas 2 a110 Roms on canvas music ?
As both have same resolution i.e. 480*845 !!
Click to expand...
Click to collapse
yes u can with a little porting.
go here

All devs please go here.
It is a project started by me to get android 4.2.x in our canvas music.
http://forum.xda-developers.com/showthread.php?t=2457432
Sent from my A88 using Tapatalk 2

[ROOT][CWM recovery]QMobile A4 bolt|

Hello All!
As You people know i always post things for QMobile A2 users but today i am posting for QMobile A4 bolt users
I was receiving messages nd also peoples were posting nd asking on the page that to how to root this A4 bolt !!!
Dear QMobile A4 bolt users ur prob is now solved & em here to get ur phone rooted nd cwm recovery installed!!!
This method is not checked by me nor any a4 bolt users but this method is checked by users of A4 clone phone!! nd this method is also i took from clone phones thread so full credit to them but also me to gather the info nd mix them in 1 thread coz i hv gathered this info from diifernet blogs! nd some info is by me!!
WARNING!!!
I am not responsible for any brick or broken hearts so dont blame me in any case!!
EDIT
The Below method is 100% working nd checked. Also the below method of rooting is working for a2 bolt lite too!!
prove
Root Method
REQUIREMENTS
1 QMobile A4 bolt
2 Orignal data cable
3 Moroboro pc suite for installing drivers automatically| DOWNLOAD IT
4 Unlock root |DOWNLOAD
5 this is optional if unlock root will not work then use it for rooting! srsroot |DOWNLOAD
6 A brain
Procedure
1) Attach your phone to the computer and turn on usb debbuging from Settings>applications>development>USB Debugging ...windows will try finding the drivers for it named e56 and will oviously fail..
2) Start moborobo pc suite.. it will search for devices and will auto install the drivers for your phone.
3) Disconnect the phone and exit the moborobo pc suite. exit it from status bar dont just close it.
4) Connect the phone again and start Unlockroot or srs root..
5) Click on the root button..Unlockroot will automatically search for the device(Named E56). Select it.
6) The rooting process will start and your phone will be rebooted. and you will see the SuperSu app in the app drawer.
NOW AFTER ROOTING ,
Install Clockworkmod Recovery
REQUIREMENTS
1 A brain
2 ADB pACKAGE |DOWNLOAD
3 QUICK BOOT |install it on ur phone via play store
4 CWM recovery | DOWNLOAD
Procedure
1) Now Extract the ADB package in your Pc root drive (Basically the root drive is C: drive )
2) Download the Recovery from above
3) Extract the ADB package & you will get an adb folder. Now put the Recovery.img downloaded above in that adb folder.
4) Now Enable USB debugging in your phone by going to Settings->Development->USB Debugging (Skip this step if it is already enabled)
5) Now Download the Quick Boot App from above & install it in your Mobile. Open that App & click on Bootloader option.
6) After sometime your phone will get stuck at the logo. (don’t panic)
7) Connect your phone to PC using USB cable.
8) Now open the adb folder & inside that folder press & hold the Shift key + right click on blank space & choose Open Command Window Here.
9) Now a black cmd window will open, there type fastboot devices
Note :- This should display your device name in Fastboot mode, if nothing is shown, then you have to Follow this to install adb drivers
10) Now Type fastboot flash recovery recovery.img
Within a sec the process will get over & it will install the cwm recovery img on your QMobile A4 Bolt
Now you can check whether your CWM is working or not:-
Remove battery of your phone and reinsert.
Press Power and Volume Up key to boot into recovery mode.
If it get booted into recovery mode then it mean you have successfuly installed it, if not then try the process again.
ENJOY QMobile A4 bolt users , now u hv rooted & cwm recovery installed!
DONT copy this method to other blogs nd websites!!
Qmobile A4 Bolt users HIT that THANKS button because i deserve that!!

I could not enter the bootloader mode through quikboot aap on my Bolt a2 lite,,,,however i have rooted it successfully.... kindly let me know to install CWM???

[ROM] Stock Rom Qmobile A50

Hello Everyone Today i finally uploaded the Stock Rom of Qmobile A50
Now many of you guys are requesting for this one so i uploaded.. It took alot time seriously alot on 1mb upload connection but that's no comparison to helping you guys....:laugh::laugh::laugh:
So i have broken the steps of restoring into five parts:
i.e.
1. You have to download the backup.7z from the given link below and then extract it and paste it in you're phone's sd-card root directory
https://docs.google.com/file/d/0B1-OUKCPi2KIVW16YlJDME1ScFk/edit?usp=sharing
2. First you have to turn off you're phone and power it up by pressing and hold the volume up,volume down and power button at the same time...
it will boot into selection mode like below:
https://docs.google.com/file/d/0B1-OUKCPi2KIVnNnX1NSQ09sNEU/edit?usp=sharing
Select the Recovery Modeby pressing volume up button..
3. Then it will take you to the sub menu from it remember here you also have to select Recovery mode and you have to cycle the menu by volume up button and select it from volume down button....
https://docs.google.com/file/d/0B1-OUKCPi2KINmhlenFWRzZlbVU/edit?usp=sharing
Remeber to cycle it from volume up and select from volume down....
4. Now it has taken to the custom recovery you previously installed if you haven't installed it this method won't work..... Now you have to select Backup and Restore menu by cycle it through you're volume up or down button and select it with you're power button....
https://docs.google.com/file/d/0B1-OUKCPi2KIYjZ0M0oyY3BMZTQ/edit?usp=sharing
5. Then it would take you the sub menu of backup and restore now you have to select the restore menu to restore it.....it will start restoring and when on completion restart you're phone...
https://docs.google.com/file/d/0B1-OUKCPi2KIdnAycUNsOGl1dTg/edit?usp=sharing
Voila you're phone is back to life from undead....
Don't forget to hit thanks button...

can i install it on dual core mt 6577 a6?
mera a6 brick ho gaia tha to mai ny claim kia bt ab q fellas ny muje dual core mai a6 dia h i think both a6 and a50 r mt 6577 based mobile and same screen size too. So can i instal JB on my a6

Reply
Hamza_rehman said:
mera a6 brick ho gaia tha to mai ny claim kia bt ab q fellas ny muje dual core mai a6 dia h i think both a6 and a50 r mt 6577 based mobile and same screen size too. So can i instal JB on my a6
Click to expand...
Click to collapse
I suppose if you backup your current rom and save it to you're pc then try it by the way i recommend not to try because it could get you're phone bricked... but that model can handle jelly bean so give it try but at you're own risk... it doesn't cost that much to flash it back to stock rom in the market....
Best of luck.

flash a6
recently i tried to root my cel and successfully its done bt when i replace stock recovery with cwn via mobile uncle tool and boot into recovery mod then cwn recovery does nt work even i tried by pressing volum +,- and power and select recovery it does nt start and after few seconds mobile turns of and normaly with out recovery it works....

Hamza_rehman said:
recently i tried to root my cel and successfully its done bt when i replace stock recovery with cwn via mobile uncle tool and boot into recovery mod then cwn recovery does nt work even i tried by pressing volum +,- and power and select recovery it does nt start and after few seconds mobile turns of and normaly with out recovery it works....
Click to expand...
Click to collapse
So what is it that you need....

no recovery in my cel...with out it i can't formate backup etc...i tried vid sp flash tool bt all in vain...

Hamza_rehman said:
no recovery in my cel...with out it i can't formate backup etc...i tried vid sp flash tool bt all in vain...
Click to expand...
Click to collapse
so you haven't rooted it.....Or you just haven't got recovery after rooting... if you haven't is you're bootloader unlocked..

Help
Hamza_rehman said:
no recovery in my cel...with out it i can't formate backup etc...i tried vid sp flash tool bt all in vain...
Click to expand...
Click to collapse
So if you can't boot into you're recovery then just simply go into fastboot mode but before connect you're mobile to pc..
then extract you're backup .7z it would contain recovery.img and flash it with the following command...
for that you have to required Android sdk which if you have it can reduce you're steps but if you haven't it you got to download it and extract it...
http://developer.android.com/sdk/index.html#download
then download the required files in tools section Android SDK tools and Android SDK platform tools
when you have downloaded it then open the the platform tools folder from you're extracted sdk window paste the recovery.img here then open cmd and go to the directory of platform tools in cmd.. like for example mine is in C:\android-sdk-windows\platform-tools so i will type
cd C:\android-sdk-windows\platform-tools
Click to expand...
Click to collapse
then it will open the cmd for tht folder then type in
adb devices
Click to expand...
Click to collapse
if it does't show then directly go to the fastboot mode from you're mobile and connect it to pc then type
adb reboot bootloader
Click to expand...
Click to collapse
then type th following command.....
fasboot flash recovery recovery.img
Click to expand...
Click to collapse
Sorry but it's my fault you guys have to unpack the backup from .7z and repack it to .zip
then you have a custom recovery now put the repacked zip onto the sd-card root directory then run cwm and wipe data/cache factory format and flash the zip.... with install zip from sd-card...
I Hope This Works :silly::silly::silly:

Thank you brother, you are doing a good job

Thank's
Sent from my Galaxy tab 2 using xda app-developers app

IMPORTANT
Hamza_rehman said:
recently i tried to root my cel and successfully its done bt when i replace stock recovery with cwn via mobile uncle tool and boot into recovery mod then cwn recovery does nt work even i tried by pressing volum +,- and power and select recovery it does nt start and after few seconds mobile turns of and normaly with out recovery it works....
Click to expand...
Click to collapse
Use mine recover.img to flash cwm on you're mobile by mobileuncle

if original contacts.apk and system files of storage etc are accidentally deleted then what can i do because neither contacts or Dialer works in my Noir A50 nor setup wizard works.Plzzzzzzzzzzzzzzzzz

Reply
Sanaullahshuaib said:
if original contacts.apk and other system files of storage are accidentally deleted then what can i do because neither contacts or Dialer works in my Noir A50 nor setup wizard works.Plzzzzzzzzzzzzzzzzzzzzzzz
Click to expand...
Click to collapse
Then Get A Package from the internet of contacts and dialer and go into custom recovery install zip from sd-card, If most of the system apps don't work then you have to backup you're data on you're pc Flash the stock rom of qmobile noir a50 to restore you're data... i have seen a great app for sms and call log backup if you want to it's name is super backup check it on google play....the link for stock rom is down below.....
http://forum.xda-developers.com/showthread.php?t=2475060:fingers-crossed:

Reply
Sanaullahshuaib said:
if original contacts.apk and system files of storage etc are accidentally deleted then what can i do because neither contacts or Dialer works in my Noir A50 nor setup wizard works.Plzzzzzzzzzzzzzzzzz
Click to expand...
Click to collapse
The above quoted apps i have uploaded if you want more apps just let me know.....:angel::angel::angel::angel:
https://drive.google.com/file/d/0B1-OUKCPi2KITUhjcFdkX0QyVEE/edit?usp=sharing

Bricked Noir A50
hey guys i have bricked my noir a50 and now it stucks at boot logo........what to do now any one please help!!

can you boot into bootloader by pressing power+vol up button if so then i can help
Sent from my Samsung Galaxy Tab 2 using XDA Premium HD

help
ZeDaYa said:
Hello Everyone Today i finally uploaded the Stock Rom of Qmobile A50
Now many of you guys are requesting for this one so i uploaded.. It took alot time seriously alot on 1mb upload connection but that's no comparison to helping you guys....:laugh::laugh::laugh:]
Click to expand...
Click to collapse
Hey i have bricked my noir a50 and it stucks at boot logo .....now what to do please help me

Just a test

Hey tihaam take out the battery for 10 to 15 seconds put it back power it on by press and holding power+ vol up button then the recovery mode will be available select recovery then recovery and reinstall rom if cant download the sdk manager install open sdk folder go to platform tools if you see adb.exe connect your mobile to pc then open command prompt type in cd and the folder directory of your platform tool folder after that type adb shell then type adb reboot recovery...it will boot to recovery.....from there flash stock rom...
Sent from my WT19i using xda app-developers app

Installation aborted
ZeDaYa said:
Hey tihaam take out the battery for 10 to 15 seconds put it back power it on by press and holding power+ vol up button then the recovery mode will be available select recovery then recovery and reinstall rom if cant download the sdk manager install open sdk folder go to platform tools if you see adb.exe connect your mobile to pc then open command prompt type in cd and the folder directory of your platform tool folder after that type adb shell then type adb reboot recovery...it will boot to recovery.....from there flash stock rom...
Sent from my WT19i using xda app-developers app
Click to expand...
Click to collapse
Dude... I have tried but..installation gets aborted...i download stock a50 rom and then put that in to my sd card ..then i clicked on intall .zip from sd card but installation was aborted....
i took my mobile to Qmobile centre but the person on the counter instantly said that it has hardware problem... and it will be repaired after changing motherboard ....What the hell...if it had hardware problem then my mobile cannot go even to recovery mode...?????
Please help i will be very thankful to u?

PhilZ recovery for Karbonn A12Star

Hello Guyz,
As no Dev. Has been made a recovery for a12* at last after lots of efforts...
I developed A Recovery For Our Devices
A waiting is over
Introducing All new
"Philz Recovery" Only By me for
Karbonn A12*(Star)
link for recovery: https://drive.google.com/file/d/0BxQZF8lqd-BHaE8yRGtUekI0Snc/view
Software to flash recovery : https://github.com/DsLNeXuS/Rashr/...aad14/RashrApp/RashrApp-release.apk?raw=true
Known issues : Touch not working properly but u can use volume keys to move up and down and power key for selection...
Every thing else working well if u find any issue than u can comment below or message me on fb..
How to disable touch on recovery :
Just boot into recovery... select Recovery setting and then go to Gui setting and disable touch....
Now will discuss how to flash recovery
Steps:-
There Are 2 wayz to install this recovery...
I. INSTALLATION WITHOUT PC
1: download mobileuncletool or flashify from playstore or link given by me.
2: open mobileuncletool or flashify n click on update recovery n wait for completion.
3: After completion boot into recovery mode..
II. INSTALLATION WITH PC
1: Download spflash tool for pc n download scatter file for MT6572 devices n install all mtk drivers on pc.
2: Open spflash tool n load the scatter file that u have downloaded above.
3: Tick on recovery n then select recovery.img n click on download.
4: Now plug usb with ur pc n connect phone without battery n then connect usb cable with phone and insert the battery.
5: Installation process will start automatically n wait for completion..
THIS IS MY SECOND WORK FOR KARBONN A12*
ENJOY CWM BASED RECOVERY
Join my grp on Facebook
Karbonn Smart A12 Star Official
(Development & Discussion) https://m.facebook.com/groups/718681911514380?refid=18&__tn__=C
Hit thanks to appreciate my work... :thumbup:

Recovery for K12*
thanku bro....

Installation with mobileuncle tool

Ui of PhilZ recovery

[FIXED][RECOVERY] Micromax Canvas Xpress 2 Working Recovery With Rooting Procedures

Working PhilZ Recovery For Micromax Canvas Xpress 2 E313​Note :
Do Not Download Anything Outside XDA Or Any Other Websites It Can Damage Your Device.​
Must Read
I "Abhi Tripathi" Is Not Responsible If Somehow You Broke Your Phone Or Anything Happens.
You Must Understand All Pros and Cons Of Installing A Custom Recovery​​​
Please Appreciate What I've Been Doing I Didn't Do It For Money Or Fame
*I Do It For You*.​Click Thanks :highfive:
Presenting Fully Working PhilZ 6.5.9 Recovery For Micromax Canvas Xpress 2.
Please Appreciate What I've Been Doing.
Read Everything Very Carefully
Micromax E313 Developers Group Join On FB Here
How To Install
For Kitkat
With Pc
Download Recovery.zip
Unzip Recovery.zip
In Sp Flash Tools Select Scatter From Unzipped Folder Then Click Download
When Flash Completes You Can Go In Recovery By Pressing VolUp+Power Button.
Without Pc
Download recovery.img
Move recovery.img In PhoneStorage
Install "KingRoot App" And Root The Phone
Now Install "Mobile Uncle Tools" From "Playstore"
Open "Mobile Uncle Tools" And Click Recovery Update SuperUser May Ask Permission Click Allow
Click On recovery.img Then Wait Your Recovery Will Be Flashed
Now You Can Go In Recovery Mode By Pressing Volume Up+Power Button.
For Lollipop
For Lollipop Click Here
Proper Video Guide For Kitkat
https://www.youtube.com/watch?v=FEESwX8Jfho
[YOUTUBE]
FEESwX8Jfho
[/YOUTUBE]
Download Files From Below
1.) Recovery.rar - Click to Download
2.) recovery.img - Click to Download

Reserved

letest kingoroot work on canvas xpress 2 stock lolipop 5.1
But how to download cwm.img for lollipop without pc
mtk uncle update recovery not match

even uncle recognize the recovery but its not installing,not going to recovery,staying at blackscreen