Database Info

[SOLVED] Bricked my Transformer....

Hi all,
I had my Transformer up and running on CM10 when I decided to give Asus JB a try this morning. As a preparation I tried to switch from TWRP to CWM. So I followed the instructions here using dd in a terminal on my tablet. After this I tried rebooting into recovery (Power + VolDown).
But I didn't work, it took me directly to a message saying "OS will cold boot in 10 Seconds if the selected mode is not confirmed". I had the choice between wiping and fastboot.
So I went into fastboot and tried to reinstall TWRP using fastboot. This worked withoud errors but after a reboot to recovery I got the same problem. When I choosed wipe date the splash screen from TWRP came up for a few seconds and then it disappeared and I shows me some lines telling me that it wiped my data - and then the device reboots.
A normal reboot led me to a screeen showing the ASUS Logo and the "The device is UnLocked" in the upper left corner. And nothing more happens...
So tried to reinstall CWM using fastpath which also worked without problems. After reboot still no direct access to CWM, had to go through wipe-data again and then it jumped into CWM. I installed several different Images with CWM but none of them solved that problem. The device still istn't able to boot into OS or direct into CWM.
I also tried to flash the blob file from stock firmware using fastboot, but after the transfer ended and it startet to flash it stopped with an red line saying an error occured.
Now I'm running out of ideas how to solve this problem. Any ideas?

mkaspar said:
Hi all,
I had my Transformer up and running on CM10 when I decided to give Asus JB a try this morning. As a preparation I tried to switch from TWRP to CWM. So I followed the instructions here using dd in a terminal on my tablet. After this I tried rebooting into recovery (Power + VolDown).
But I didn't work, it took me directly to a message saying "OS will cold boot in 10 Seconds if the selected mode is not confirmed". I had the choice between wiping and fastboot.
So I went into fastboot and tried to reinstall TWRP using fastboot. This worked withoud errors but after a reboot to recovery I got the same problem. When I choosed wipe date the splash screen from TWRP came up for a few seconds and then it disappeared and I shows me some lines telling me that it wiped my data - and then the device reboots.
A normal reboot led me to a screeen showing the ASUS Logo and the "The device is UnLocked" in the upper left corner. And nothing more happens...
So tried to reinstall CWM using fastpath which also worked without problems. After reboot still no direct access to CWM, had to go through wipe-data again and then it jumped into CWM. I installed several different Images with CWM but none of them solved that problem. The device still istn't able to boot into OS or direct into CWM.
I also tried to flash the blob file from stock firmware using fastboot, but after the transfer ended and it startet to flash it stopped with an red line saying an error occured.
Now I'm running out of ideas how to solve this problem. Any ideas?
Click to expand...
Click to collapse
If you have working fastboot maybe i can help you,what's your bootloader version?

I'm not sure, is there a way to see the version?

mkaspar said:
I'm not sure, is there a way to see the version?
Click to expand...
Click to collapse
Connect your tab to your PC
Open a command windows on your PC
Goto your fastboot directory
type fastboot devices
you will see bootloader version

mkaspar said:
I'm not sure, is there a way to see the version?
Click to expand...
Click to collapse
Wich firmware version you were using before you bricked?

Unfortunately it does not show the version. When it enter fastboot devices it only shows
? fastboot
Click to expand...
Click to collapse

I was on firmware version CM10 20121001

mkaspar said:
I was on firmware version CM10 20121001
Click to expand...
Click to collapse
ok,let me put it this way,did you ever upgraded to 9.4.5.30 firmware?

No, not before my tablet got bricked. I tried to recover with a stock Rom afterwards and accidentally downloaded and flashed .30 instead of .26
Maybe this makes things worse but the problem is not caused by that.
Btw: thank your for your support
Sent from my GT-I9300 using xda premium

mkaspar said:
No, not before my tablet got bricked. I tried to recover with a stock Rom afterwards and accidentally downloaded and flashed .30 instead of .26
Maybe this makes things worse but the problem is not caused by that.
Btw: thank your for your support
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Did you used NvFlash tool while you were on .26?Anyway you should come here on irc --> http://webchat.freenode.net/?channels=asus-transformer <--- it's easier to chat than here on forum.

No, I stupid idiot did not make a backup with nvflash.
I really appreciate your support but unfortunately I'm not at home anymore so I can't chat for the next hours.
Sent from my GT-I9300 using xda premium

Have you try this :
Code:
*** Factory Restore after a softbrick/Downgrade from Jelly Bean to ICS/Clean Factory Restore ***
When You Need This?
* if you get stuck on Asus boot screen (the one with the spinning wheel)
* If you don't like JB and you want ICS back
* if you want to get back to a clean stock firmware
Note: You need to have a working recovery (stock or custom) in order to use this method.
========= Recover /Downgrade from Jelly Bean to ICS/Clean Factory Restore with stock recovery =========
1) Download the latest firmware from Asus site (based os your SKU,eg. ww 9.4.5.26 * to downgrade from Jelly Bean you need the 9.4.5.30 firmware)
2) Extract the .zip file somewere on your desktop (the result will be another .zip file,use it for step 3)
3) Rename the extracted archive to "EP201_768_SDUPDATE" (without the " ") and upload it to a MicroSD card
4) Insert the MicroSD card in your tablet and use this button combination to Power ON and go to recovery --> Start the tablet by pressing Volume Down and POWER togheter for 5 seconds ,a message will inform you that you have 5 seconds to enter the recovery,press Volume UP before the 5 seconds expire.
At this point the device will go in recovery and should start updating your firmware .
Source

ghenarys said:
Have you try this :
Code:
*** Factory Restore after a softbrick/Downgrade from Jelly Bean to ICS/Clean Factory Restore ***
When You Need This?
* if you get stuck on Asus boot screen (the one with the spinning wheel)
* If you don't like JB and you want ICS back
* if you want to get back to a clean stock firmware
Note: You need to have a working recovery (stock or custom) in order to use this method.
========= Recover /Downgrade from Jelly Bean to ICS/Clean Factory Restore with stock recovery =========
1) Download the latest firmware from Asus site (based os your SKU,eg. ww 9.4.5.26 * to downgrade from Jelly Bean you need the 9.4.5.30 firmware)
2) Extract the .zip file somewere on your desktop (the result will be another .zip file,use it for step 3)
3) Rename the extracted archive to "EP201_768_SDUPDATE" (without the " ") and upload it to a MicroSD card
4) Insert the MicroSD card in your tablet and use this button combination to Power ON and go to recovery --> Start the tablet by pressing Volume Down and POWER togheter for 5 seconds ,a message will inform you that you have 5 seconds to enter the recovery,press Volume UP before the 5 seconds expire.
At this point the device will go in recovery and should start updating your firmware .
Source
Click to expand...
Click to collapse
Yes. I tried this but it does not work. When I start with pressing Power and VolumeDown the system only lets me choose between wipe data and fastboot mode. It does not recognize any system update files

Problem solved...
Hi,
just to let you know I solved my problem. After trying a lot of different possible solutions described in a lot of threads nothing worked for me. Finally I flashed JellyBean through CWM from external SD Card. This did not change anything but after booting into fastboot mode I installed the kernel blob extracted from a zip file found here by using
Code:
fastboot -i 0x0b05 flash boot blob
And that's it.... after 10 hours of try and error I finally got my device up and running again....

Acer A700 Bricked ----

Hellooooooooooooooooooooooooooooooooo!!!
this is my first thread in this forum, mi name is Nicolas and i ve a very big problem with my new tablet.
I was trying to install the new Jelly Bean (OS_Acer_RV09RC08.WW.GEN1_A41J_A) and everything was OK
I unlocked the bootloader .......and....
I try to root and just bricked....
Everytime i turn on the tablet i can see the "Acer logo" and the line: Bootloader Version JB-653b3d3 (Unlock Mode)
I cant get into the recovery mode.....
Sorry for my bad english....i need your help ppl!!!!
Thanks for ur time.
Nicolas.

May you can get into Fastboot mode and reflash the recovery.
Give it a try =)

Do you have a androids of your original ROM?
I did the exact same thing just yesterday...
If you have a JB image to work from, get it in fastboot mode and look at the thread on CWM Recovery 6.0.1.5...
Sent from my A700 using xda premium

thks for the replies.....
i downloaded the stock rom from the Acer web page
i tried with:
"adb reboot-bootloader" and NOTHING.....i ve the line: <waiting for the device> ....and ....5 min later nothing.
then:
tried to get the fastboot mode (vol + & PWR) and the tablet just get the same boot = nothing.
:crying:

freejack84 said:
thks for the replies.....
i downloaded the stock rom from the Acer web page
i tried with:
"adb reboot-bootloader" and NOTHING.....i ve the line: <waiting for the device> ....and ....5 min later nothing.
then:
tried to get the fastboot mode (vol + & PWR) and the tablet just get the same boot = nothing.
:crying:
Click to expand...
Click to collapse
To get into fastboot mode, it's the following combination;
- Press [vol-] + [power]
- As soon as the tablet vibrates, let go [power] then cycle your rotation lock button left and right till you see the the text start to appear.
Unless you;re going to try and fastboot a system image setup or recovery image or another boot.img, not sure what you wish to accomplish.
I would guess you would be better off installing maybe the GB full version JellyBean update.
Also, I understand there,s a a700 ICS service rom out there somewhere. That might help you also.
But these are just guesses at this point.
What would help, is to know exactly what you did to get yourself into this situation. Like What root procedure from what post? If you tried one of the ICS Boot.image flashes, when you had JB updated, well, no wonder it borked up. If that's the case, it's simple just to fastboot a JB Boot.img back in.
So which thread did you get the root procedure from EXACTLY?
One more thing, this thread belongs in Q&A Forum, so I put in a request to have it moved.
MD

Moscow Desire said:
To get into fastboot mode, it's the following combination;
- Press [vol-] + [power]
- As soon as the tablet vibrates, let go [power] then cycle your rotation lock button left and right till you see the the text start to appear.
Unless you;re going to try and fastboot a system image setup or recovery image or another boot.img, not sure what you wish to accomplish.
I would guess you would be better off installing maybe the GB full version JellyBean update.
Also, I understand there,s a a700 ICS service rom out there somewhere. That might help you also.
But these are just guesses at this point.
What would help, is to know exactly what you did to get yourself into this situation. Like What root procedure from what post? If you tried one of the ICS Boot.image flashes, when you had JB updated, well, no wonder it borked up. If that's the case, it's simple just to fastboot a JB Boot.img back in.
So which thread did you get the root procedure from EXACTLY?
One more thing, this thread belongs in Q&A Forum, so I put in a request to have it moved.
MD
Click to expand...
Click to collapse
Thks MD for ur instant reply.
Sorry for dont put my thread into the Q&A Forum. It was a mistake. Sorry again
My situation is: "like i remember" i tried to make the root with the "flash-ICS-patchedBoot.bat".....i know that BAT is for ICS and not for JB but i take that mistake doing the thing really fast. :angel:
Ok...i need them to get the fastboot with the JB Boot.img like you said.
The JB Boot.img is into the Rom??? because i saw the boot.img into the JB update.zip
Can u tell me the command to get that flash? Is "fastboot flash boot boot.img"?
Thks for ur patience

freejack84 said:
Thks MD for ur instant reply.
Sorry for dont put my thread into the Q&A Forum. It was a mistake. Sorry again
My situation is: "like i remember" i tried to make the root with the "flash-ICS-patchedBoot.bat".....i know that BAT is for ICS and not for JB but i take that mistake doing the thing really fast. :angel:
Ok...i need them to get the fastboot with the JB Boot.img like you said.
The JB Boot.img is into the Rom??? because i saw the boot.img into the JB update.zip
Can u tell me the command to get that flash? Is "fastboot flash boot boot.img"?
Thks for ur patience
Click to expand...
Click to collapse
It's no problem.
So you fastbooted an ICS boot.img on a JB rom
So, you need to see if you can manually get it into fastboot mode with the procedure I pointed out above (note it will probably wipe your user data, but who cares)
If you get it in fastboot mode, verify via windows device manager, then just put a JB Boot image in there. I have a little package in my Boot.image thread Full /System RW-Root. Don't use the boot mage in it, as it's for a 701. Just copy your JB boot.image in there and fastboot it. You have the correct command.
Verboth has a new rom, that contains an unsecure boot.img for the 700 JB. You can use that one also. It's what you were trying to do originally, just with a wrong image (ICS)
The reason ADB doesn't see it, is because the system isn't running. The newer CWM recoveries should have adb enabled through CWM, but I don't think you put that in yet.
Hopefully you'll get it fastbooted.
MD

Moscow Desire said:
It's no problem.
So you fastbooted an ICS boot.img on a JB rom
So, you need to see if you can manually get it into fastboot mode with the procedure I pointed out above (note it will probably wipe your user data, but who cares)
If you get it in fastboot mode, verify via windows device manager, then just put a JB Boot image in there. I have a little package in my Boot.image thread Full /System RW-Root. Don't use the boot mage in it, as it's for a 701. Just copy your JB boot.image in there and fastboot it. You have the correct command.
Verboth has a new rom, that contains an unsecure boot.img for the 700 JB. You can use that one also. It's what you were trying to do originally, just with a wrong image (ICS)
The reason ADB doesn't see it, is because the system isn't running. The newer CWM recoveries should have adb enabled through CWM, but I don't think you put that in yet.
Hopefully you'll get it fastbooted.
MD
Click to expand...
Click to collapse
Okay, so since I just did this, I'm going to try and give you a "how to" on how I fixed it...
MD and pawitp both are the authorities on this, but I think this will help and I a, sure they will correct me where I go wrong.
First, use the manual process for getting your A700 in fastboot.. power button + down vol, wait for the first buzz then release only the power button, wait for the second buzz then press the up volume button. Your tab should now be in fastboot mode.
Connect it to your computer.
Get a copy of the proper recovery image "recovery-a700-6015" and the following ROM ( http://forum.xda-developers.com/showthread.php?t=1952124) and save them to a directory where you can find it easily.
Pull the SD card from your tab and put the ROM from above in the base directory and put it back in your tab.
From the c prompt on your computer use the following fastboot command:
Fastboot devices
----#make sure that the computer sees your a700
Fastboot boot <save directory>recovery-a700-6015.img
----#your tab will reboot into CMR Recovery
In recovery format system, data, cache, dalvik
Still in recovery install the ROM from your external SD card.
The Aroma Installer will guide you through it, but make sure you tell it to install the new firmware.
Reboot.
You should be on the stock rooted ACER Great Britain release.
From there you can download and install CM10 (which is what I did), or any other ROM you would like.
Sent from my A700 using xda premium

well.......30 minutes with the tablet and:
I put the tablet in Recovery state with the last instructions.....but now i ve too much errors lines:
Important: all this error are "before" flash again the recovery
The recovery cant:
mount /cache/recovery/command
mount /cache/recovery/log
mount /cache/recovery/last_log
cant open cache/recovery/log
and.....
cant mount SDCARD, EXTERNALSD, SYSTEM, CACHE, etc etc...
when i try to flash again the recovery: <waiting the device> and nothing......i cant put the tablet in fastboot mode.

i have the same problem before. 無得整的, 要上acer換底版的

NEWS:
Finally i get the fastboot mode (Vol - & PWR and then CYCLE THE ROTATION LOCK). :good:
First: reflash the recovery and DONE
All the errors just gone.
Now.....install again the JB.....and DONE
My Acer go back to normally conditions. :victory:
Thks for ur support. :laugh:

freejack84 said:
NEWS:
Finally i get the fastboot mode (Vol - & PWR and then CYCLE THE ROTATION LOCK). :good:
First: reflash the recovery and DONE
All the errors just gone.
Now.....install again the JB.....and DONE
My Acer go back to normally conditions. :victory:
Thks for ur support. :laugh:
Click to expand...
Click to collapse
Uhmmmm.... didn't I state that the other day?
Glad you got it going Mate :good:
MD

thks ppl

freejack84 said:
NEWS:
Finally i get the fastboot mode (Vol - & PWR and then CYCLE THE ROTATION LOCK). :good:
:
Click to expand...
Click to collapse
I didnt have the same exact issue like the other users BUT this key combination to finally get back into fastboot during a hanging ACER logo bootup with a red failure msg at the corner was the LIFE SAFER!!!!!
VOL - (left button with two knobs) & PWR and then CYCLE THE ROTATION LOCK
tattoo this on your arms!!! :laugh:

LukeRG said:
I didnt have the same exact issue like the other users BUT this key combination to finally get back into fastboot during a hanging ACER logo bootup with a red failure msg at the corner was the LIFE SAFER!!!!!
VOL - (left button with two knobs) & PWR and then CYCLE THE ROTATION LOCK
tattoo this on your arms!!! :laugh:
Click to expand...
Click to collapse
LOL

pls step step explain ı recovery my tablet but ı want to back syock rom tablet internal storage not ready in pc ı cant see internal storage ı see only sc card camera dont workk how back to syock rom pls help..

thank's man
freejack84 said:
NEWS:
Finally i get the fastboot mode (Vol - & PWR and then CYCLE THE ROTATION LOCK). :good:
First: reflash the recovery and DONE
All the errors just gone.
Now.....install again the JB.....and DONE
My Acer go back to normally conditions. :victory:
Thks for ur support. :laugh:
Click to expand...
Click to collapse
Thank's... you just safe my problem today

u welcome .......

Hello everybody,
I think I have NOT exactly the same problem but very similar.
Let me explain how I got there:
I had JB bootloader and CM11 installed for long and working fine.
Last days I tried out the CM12.1 unofficial rom with successful installation.
I noticed that the camera focus was not working. Usually I never use the camera and was not sure if it worked before. So I went back to CM11 to look if it is rom dependent. In CM11 it still was not working and I went back to stock. The stock rom I found was Android 4.0.4 and I tried to make OTA update what showed me a “not allowed to your device” –error.
However, at this moment I was quite sure that the camera focus is a hardware defect and wanted to go on testing the new CM12.1. I installed it again from CWM recovery and it was not booting anymore.
The problem is, that the stock rom flashed an ICS bootloader which is not compatible anymore. I also cannot boot into recovery anymore but fastboot is working.
Power-On:
shows Bootloader Version ICS-MR1-a055314 (Unlock Mode) and nothing more
Power-On + Vol.Down:
Bootloader Version ICS-MR1-a055314 (Unlock Mode)
Erasing Cache before SD update…
SD update cnd: recovery
--update_package=SDCARD:update.zip
Booting recovery kernel image
Then for just a second CWM is shown:
CWM-based Recovery v6.0.5.1
Finding update package
E:unknown volume for path [SDCARD:update.zip]
E:Can't mount SDCARD:update.zip
Installation aborted.
Rebooting...
Then it holds on Bootloader Version ICS-MR1-a055314 (Unlock Mode)
I could not find any button combination to boot something else.
What I tried and what did not make any changes:
Flashing the recovery.img again
Erase userdata, cache, system
Please help me to boot up recovery again and flash a JB bootloader and new rom.
Thanks and kind regards,
Gandlz

Well, in between I found a solution and can answer my own question now:
The trick is to flash the CWM Recovery not to the recovery partition but to the boot partition. (fastboot flash boot recovery.img)
After restarting the tablet it boots directly into CWM Recovery.
I found a newer stock rom with jelly bean android and installed it to come back to JB-Bootloader. Now I could install CM10.2 CM11 or CM12.1 again.
The stock rom is from a german forum:
android-hilfe.de/thema/a700-zurueck-aufs-deutsche-stock-rom-flashen-anleitung-imagefile.329590
By the way: I’m running CM10.2.1 and it is very much faster than CM11 or CM12.1. I don’t need the newer features and like the old design even more. And also the camera focus is working now, so it is definitely a software issue with newer CM versions.
Best regards,
Gandlz

[Guide]Flash TF300T Rom manually on Locked Bootloader ON JB 4.2.1 !!

Dear all users of TF300T.
If you are using Stock ROM (Rooted/Non Rooted) and are bricked or stuck on ASUS boot screen. Then this guide is for you.
As i was using stock ROM (ROOTED) with Locked boot loader without custom recovery and my tf300t was Sofbricked due to wrong configurations at Display Pixel scaling and also reformat did not work for me.!
So i thought to create this guide which may help people out here It worked for me Try your LUCK.
Sorry if i am re posting i did not got any guides out here...
If this helped you please give me a Thumbs up.!
Steps:-
1 Download the latest ROM from ASUS website Which matches your SKU.(Important).
It would look somehing like this (TF300T-TW_epad-10_6_1_15_3-UpdateLauncher . zip)
2 Extract it and rename that file to ( EP201_768_SDUPDATE . zip )
3 Now copy this new renamed file to SDCARD (Root of sd card).
4 Now Press and hold Volume Down + Power for a few seconds. Then you will see the ASUS recovery options.
5 Now Press the 1 option from the left (RCK) by pressing Vol+ 2 times and let it flash the ROM from scratch.
WARNING:- You will loose all data in the internal space!
Now wait for a few minutes. It will flash the ROM.
And wola! Your TF300T will again work fine!!
Any suggestions and comments are most welcomed!

manikkumar20 said:
Dear all users of TF300T.
If you are using Stock ROM (Rooted/Non Rooted) and are bricked or stuck on ASUS boot screen. Then this guide is for you.
As i was using stock ROM (ROOTED) with Locked boot loader without custom recovery and my tf300t was Sofbricked due to wrong configurations at Display Pixel scaling and also reformat did not work for me.!
So i thought to create this guide which may help people out here It worked for me Try your LUCK.
Sorry if i am re posting i did not got any guides out here...
If this helped you please give me a Thumbs up.!
Steps:-
1 Download the latest ROM from ASUS website Which matches your SKU.(Important).
It would look somehing like this (TF300T-TW_epad-10_6_1_15_3-UpdateLauncher . zip)
2 Extract it and rename that file to ( EP201_768_SDUPDATE . zip )
3 Now copy this new renamed file to SDCARD (Root of sd card).
4 Now Press and hold Volume Down + Power for a few seconds. Then you will see the ASUS recovery options.
5 Now Press the 1 option from the left (RCK) by pressing Vol+ 2 times and let it flash the ROM from scratch.
WARNING:- You will loose all data in the internal space!
Now wait for a few minutes. It will flash the ROM.
And wola! Your TF300T will again work fine!!
Any suggestions and comments are most welcomed!
Click to expand...
Click to collapse
For #5, do we select RCK or something else? When I select RCK and push vol+ twice, I just get the bootloader issue 0x00000000.

rck
clutz2516 said:
For #5, do we select RCK or something else? When I select RCK and push vol+ twice, I just get the bootloader issue 0x00000000.
Click to expand...
Click to collapse
when u select RCK does the green Light glow keep on Blinking or not?
Are you using unlocked boot loader??

When I select RCK the blinking stops.
My tablet says in the upper left corner that my device is unlocked.

clutz2516 said:
When I select RCK the blinking stops.
My tablet says in the upper left corner that my device is unlocked.
Click to expand...
Click to collapse
What problem exactly are you facing?? Can you boot into android??
Do u have CWM recovery or TWRP??
Did u follow all steps?? r u using the same SKU as u r tablet??

The problem I am facing is that I do not have a recovery working. I cannot access recovery at all. I was trying to update the tablet by downloading the official firmware and placing it on the root of the sdcard. But it wont recognize the update when in Android. (I can boot into Android.)

HI
I think then try to re flash your recovery first using fast bot method...then try this guide again..
or the last option is send to ASUS..:silly::silly::silly:

Is this method work with every firmware, and is it work on me301t?
Sent from my ME301T using xda premium

After Update 7-29-13
Similar problem 300t does'nt go past the asus startup screen, when i tried to do a wipe and restore it just goes back to the asus load screen (with spinning circle)and sits and spins, so then I tried reinstalling from micro sd card using the trick where u rename the file to EP201 after trying to reinstall the newest version and an earlier version from the microsd and got the dead android (same results for both )and when I use recovery I get the android guy and loading bar and he fall over dead with error, but when turning it back on, everything goes back to the stuck loading screen. If you connect the tablet to a pc it says usb driver install failed and if you try to force driver install through device manager, the driver install completes but then says the device cannot start. asus sync does not see it , I want to try to put the ep201 file in the SDCARD folder in the internal sdcard but cannot perform this because the pc cannot see the tablet. any help or suggestions would be appreciated.The un rooted tablet Was running 4.2 just fine before i tried the new ota update 7-29-2013 and thats when this happened , I tried to call Asus, since my warrenty had expired last month they said they would fix it , but it would cost me .....i explained that their update is what made it unusable, but they didnt say anything about that fact. and told me the same .... if you have a idea or have solved the same issue PLEASE post
Thanks
Rez

[Q] Red Triangle on Android Man

I have a Xoom WiFi on Android 4.1.2
I was trying to Unlock, Flash Recovery, Root and then Flash a Rom. I have Flashed on my phone a couple of times so I am a little familiar with the process.
I did the following:
1.
adb reboot bootloader
fastboot oem unlock
fastboot reboot
2.
adb reboot bootloader
fastboot flash recovery "name of file".img. (the file i used was "recovery-clockwork-touch-6.0.3.1-wingray.img").
3.
Once you have verification on your device that this has been flashed, reboot your device by holding volume up + power.
Then 3 seconds after you see the Motorola logo, hit volume down. You should now see "Android Recovery" in the top left corner. Hit volume up to boot into recovery.
This is where things go wrong.
Upon reboot,
I press down volume upon seeing the logo.
It then says Android Recovery.
I then press up volume.
then it says entering Android Recovery Mode
reading ODM Fuse:1
Then the Green Android man shows up with the red triangle.
It sits there for a while then boots into Android normally.
I have been searching for a solution since this morning. Everything I found about this has not helped.
Earlier in the day I did Flash a different Recovery so I think I have two. I installed the ROM manger app. It shows two installed.
ClockworkMod Recovery
Team Win Recovery Project (TWRP)
I am stuck as to what to do... Please help.
Thanks
Jim

jbfoster said:
I have a Xoom WiFi on Android 4.1.2
I was trying to Unlock, Flash Recovery, Root and then Flash a Rom. I have Flashed on my phone a couple of times so I am a little familiar with the process.
I did the following:
1.
adb reboot bootloader
fastboot oem unlock
fastboot reboot
2.
adb reboot bootloader
fastboot flash recovery "name of file".img. (the file i used was "recovery-clockwork-touch-6.0.3.1-wingray.img").
3.
Once you have verification on your device that this has been flashed, reboot your device by holding volume up + power.
Then 3 seconds after you see the Motorola logo, hit volume down. You should now see "Android Recovery" in the top left corner. Hit volume up to boot into recovery.
This is where things go wrong.
Upon reboot,
I press down volume upon seeing the logo.
It then says Android Recovery.
I then press up volume.
then it says entering Android Recovery Mode
reading ODM Fuse:1
Then the Green Android man shows up with the red triangle.
It sits there for a while then boots into Android normally.
I have been searching for a solution since this morning. Everything I found about this has not helped.
Earlier in the day I did Flash a different Recovery so I think I have two. I installed the ROM manger app. It shows two installed.
ClockworkMod Recovery
Team Win Recovery Project (TWRP)
I am stuck as to what to do... Please help.
Thanks
Jim
Click to expand...
Click to collapse
Please follow the Root Method mentioned in the 2nd Post of LAIOT thread . You can easily find it within the Development Forum , or my signature.
"This Story Ends Where It Began" - Octavarium (Dream Theater)
Sent from my GT-I9505

One of the files link is broken.
The requested URL /atftas/OEM/Motorola/XOOM/Xoom-Universal-Root.zip2 was not found on this server.

I have another problem.
Now I have two devices. If I unplug the Xoom it still finds emulator 5554. What is emulator 5554?
Thanks
Jim

I got around the emulator 5554 problem by using the -d option. I followed everything and all went fine. I installed the app Root Checker Basic but it says Sorry! this device does not have proper root access.
All steps completed with no errors.
I guess I'm stuck again.
Jim

I flashed back to stock. Did all the steps again and the same thing.

I tried several more times and it still would not work.
I went to another site and downloaded the root.zip and it worked this time. The root file on this site would not work for for some reason.
The Android man with the red triangle problem is also gone. Not sure what fixed it. I assume that it was because I flashed back to stock and used a different root.zip file.
Thanks for all the help
Jim

[Q] Bricked Vodafone Smart 4 turbo

I recently tried to flash my vodafone smart 4 turbo with the stock rom with yulong flash tool but after flashing i get "powered by android" logo and after that black screen with some random stuff (the word modem in a blue box up on the left side and the words up and down in the middle of the screen) i got no response from touch or buttons and no recovery. I followed the steps (select flash files, hit start button, hold volume + and connect device) but phone got in fastboot mode and flashing started immediately after finishing i powered up the phone ending up with that mess. Any ideas?
p.s the stock rom was downloaded directly from coolpad site and was the exact model (8865u) and version of the rom that was already installed on the device; something strange that i noticed is that after that brick if i leave the device on it gets overheated

reboot to recovery
Android_user_89 said:
I recently tried to flash my vodafone smart 4 turbo with the stock rom with yulong flash tool but after flashing i get "powered by android" logo and after that black screen with some random stuff (the word modem in a blue box up on the left side and the words up and down in the middle of the screen) i got no response from touch or buttons and no recovery. I followed the steps (select flash files, hit start button, hold volume + and connect device) but phone got in fastboot mode and flashing started immediately after finishing i powered up the phone ending up with that mess. Any ideas?
p.s the stock rom was downloaded directly from coolpad site and was the exact model (8865u) and version of the rom that was already installed on the device; something strange that i noticed is that after that brick if i leave the device on it gets overheated
Click to expand...
Click to collapse
you need to start a adb terminal and type: adb reboot recovery phone will then reboot into recovery, i wipe cash & factory reset, then all fine after reboot