Hi,
My p500 phone is just showing LG logo on power up and gets blank after few seconds. I tried all combination volume, power, home keys.
It's not even getting detected by PC. Actually its not reaching to boot loader and stuck before that.
To achieve this situation what I did :
1. I wanted to flash new 4.4.2 ver 12 with this thread.
2. I wiped all data, cache , etc.
3. I tried to update CWM Recovery v6.0.4.8 http://forum.xda-developers.com/showthread.php?t=2564767 from v6.0.4.6.
4. During the installation I pulled out battery by mistake.
5. I rebooted the phone and it got stuck to blank screen after on LG logo screen.
Please suggest something.
I know phone doesn't have any data, rom and CWM recovery (corrupted) and not even boot leader.
Also adb is not able to detect as it's not booting till PC can detect a device.
I am sure it's not hard bricked
Please help , how can at least boot so that adb can detect.
Thanks,
Devesh
Solved
That's how it worked :
1. I pressed a magical combination (dont remember ) :
a. Up volume + back key + power key while inserting battery
or
b. Up down+ back key + power key while inserting battery
which game emergency mode. And that was enough for me.
2.Then, I used standard method to flash recovery and image see here
3. I flashed finally cwm v6.0.4.8 with kitkat 4.4.2.
and it worked
Hello everyone
I own the Motorola Moto G ( 1st gen) xt1033 model. I had cm 13(latest release) flashed on it and my custom recovery is TWRP 2.8.4.0 and it was working fine until today after using it for around 2 months.
So what happened today is that while running an application, my Moto G shut down randomly( I don't know the reason for that),and it got stuck in bootloop ( Everytime I start it, the cm logo will appear and then it sometimes even shows my lock screen but instantly becomes black after that and most of the time its stuck only on the cm logo). After this I thought of restoring it back to the original firmware using this link: http://forum.xda-developers.com/showthread.php?t=2700502
I can get into fastboot mode but can't access the ADB as USB debugging mode was not enabled ( that's the main problem )
So following the procedures of that post, everything worked well on the log of the fastboot (no errors) but after that when I reboot my phone, again the cm logo appears (Even when I flashed it to stock 5.0.2 Lollipop!) and I can even get to my old lock screen sometimes and then instantly it goes black. Even if I try flashing a custom image like stock or some other ROM , it gives no effect as again the cm logo would appear.
I think this has to do with the fact that USB debugging mode was not enabled on it.
Also, I can't enter my recovery. When I use the standard procedure to get into fastboot (power button + volume (-) ) and select recovery, the TWRP splash screen comes then the screen turns black and normal reboot takes place( stuck on the cm head). I tried flashing different recoveries using fastboot (also tried mfastboot) like CWM and even TWRP again but still that bugged TWRP recovery remains.
I can't get to recovery neither can I boot up my phone. I can flash recovery or image files(It shows no errors flashing things, but no effect takes place :/ )
Can someone please help me in finding the solution for this problem? Thanks in advance
Just clear the data, cache and dalvik cache. Phone should boot
I was on Elite ROM v7 and I wanted to go back to stock with the official Honor 6X Rollback Package but failed. Now the phone stuck at boot screen. I can't boot into fastboot, no twrp, no stock recovery. 3 button dload method wont work any more. If I hold the power button long enough, the phone will reboot with two vibrations and go right back to "this device is booting" screen. I waited till the battery is depleted and tried every possible combination again, including volume down+plug in usb cable connecting to a pc, still boots into the same screen.
Here's what I have done that caused the brick.
1) while in Elite Rom v7, I power off the phone.
2) dload official intermediate package.
3) dload official 6.0. (it succeeded followed by restart and user reset.
4) the phone then stuck at the blue Honor screen.
5) I force the phone to reboot by holding the power button, the phone entered stock eRecovery. I did a factory reset. The phone still stuck upon reboot.
6) I reboot the phone to fastboot mode and unlock the bootload, after this step, the phone stuck at "this device is booting" screen and wont boot into anything else.
When looking back, I guess between 1 and 2, I should have booted into twrp and format data, which is ecryted.Since I missed this step, it caused the system hung at step 4.
I have a similar problem i thinck it has to do with the warning message i waited until battery was empty and then i got a little different screen wich allows you to enter recovery or boot the device if you get this screen booting will work.
In my case i get the broken screen only if i reboot if i shutdown i get the wirking screen. But my problem is a bir more tricky because the recovery dosent work properly it gives my the option o download stock rom and recovery but it allways failes wehn fetching package info...
The other option i get in the recovery is to shutdown or reboot nothing else
And i can't use fastboot because of the reboot problem...
Using the hardware keys dosent work too...
XelaaleX1234 said:
I have a similar problem i thinck it has to do with the warning message i waited until battery was empty and then i got a little different screen wich allows you to enter recovery or boot the device if you get this screen booting will work.
In my case i get the broken screen only if i reboot if i shutdown i get the wirking screen. But my problem is a bir more tricky because the recovery dosent work properly it gives my the option o download stock rom and recovery but it allways failes wehn fetching package info...
The other option i get in the recovery is to shutdown or reboot nothing else
And i can't use fastboot because of the reboot problem...
Using the hardware keys dosent work too...
Click to expand...
Click to collapse
What reboot problem? Is the usb cable in when your attempting to boot fastboot?
---------- Post added at 01:46 PM ---------- Previous post was at 01:45 PM ----------
shadowcliffs said:
I was on Elite ROM v7 and I wanted to go back to stock with the official Honor 6X Rollback Package but failed. Now the phone stuck at boot screen. I can't boot into fastboot, no twrp, no stock recovery. 3 button dload method wont work any more. If I hold the power button long enough, the phone will reboot with two vibrations and go right back to "this device is booting" screen. I waited till the battery is depleted and tried every possible combination again, including volume down+plug in usb cable connecting to a pc, still boots into the same screen.
Here's what I have done that caused the brick.
1) while in Elite Rom v7, I power off the phone.
2) dload official intermediate package.
3) dload official 6.0. (it succeeded followed by restart and user reset.
4) the phone then stuck at the blue Honor screen.
5) I force the phone to reboot by holding the power button, the phone entered stock eRecovery. I did a factory reset. The phone still stuck upon reboot.
6) I reboot the phone to fastboot mode and unlock the bootload, after this step, the phone stuck at "this device is booting" screen and wont boot into anything else.
When looking back, I guess between 1 and 2, I should have booted into twrp and format data, which is ecryted.Since I missed this step, it caused the system hung at step 4.
Click to expand...
Click to collapse
Follow this guide https://forum.xda-developers.com/honor-6x/how-to/how-to-to-stock-emui-5-0-flashing-twrp-t3679985
Got the solution
After the battery was empty it booted into a little different screen wich i was able to boot from, then i downloaded the firmware and put it into dload folder on external sd. Next i force updated by holding [volume up] [Volume down] and [Power button]. Now i have a working recovery boot and Rom. Everything is stock and the bootloader is locked again.
I discovered this this morbign and didnt had time to answer earlyer sorry for that...
Someone asked because of the bootloader the only thing i got was this broken screen didnt react to my input, cable plugged in plugged out. Maby the warning screen comes before everything or there is not enough time for the timout or whatever... The important thing is that you can fix it that way!:laugh::victory:
My phone got stuck at TWRP Loop!!
So, there is what i did...
I flashed Samsung a7 firmware ANDROID 10 [download from firja] and it worked. I needed to root my phone and tried Magisk new app.
But, with new Firmware I did not had TWRP installed, so I flashed TWRP with oden as instructed in this POST [BTW, I followed first method , not the *****OREO ROOT INSTRUCTIONS:***** ].
** TWRP version is 3.2.3-1_ashyx **
After that my phone got stuck at TWRP Loop.
Phone will not boot to normal , only BOOTLOOP to TWRP. Most of the time TWRP doesn't load fully and TWRP screen seams Black Line [in horizontal axix, MY phone display fine, it seems come from The TWRP!! ].
So, I am kinda STUCK at this TWRP Loop and TWRP load at it LOGO nothing more.
I tried every possible KEY combination to get to the fastboot mode/download mode but failed.
One or TWO time I was able[or it did it self!] to boot into TWRP (TWRP loaded but , with BLACK line) , i tried to enter download mode but failed.
So, what can i do?
-Thanks
I got the same problem, i did this: Power + volume down next when it restarted fast pressed v+ and v- and plug in the cable before it showed samsung logo
farab1 said:
My phone got stuck at TWRP Loop!!
So, there is what i did...
I flashed Samsung a7 firmware ANDROID 10 [download from firja] and it worked. I needed to root my phone and tried Magisk new app.
But, with new Firmware I did not had TWRP installed, so I flashed TWRP with oden as instructed in this POST [BTW, I followed first method , not the *****OREO ROOT INSTRUCTIONS:***** ].
** TWRP version is 3.2.3-1_ashyx **
After that my phone got stuck at TWRP Loop.
Phone will not boot to normal , only BOOTLOOP to TWRP. Most of the time TWRP doesn't load fully and TWRP screen seams Black Line [in horizontal axix, MY phone display fine, it seems come from The TWRP!! ].
So, I am kinda STUCK at this TWRP Loop and TWRP load at it LOGO nothing more.
I tried every possible KEY combination to get to the fastboot mode/download mode but failed.
One or TWO time I was able[or it did it self!] to boot into TWRP (TWRP loaded but , with BLACK line) , i tried to enter download mode but failed.
So, what can i do?
-Thanks
Click to expand...
Click to collapse
Nothing to worry and don't panic,
I've been facing problem like this.
To enter bootloader / download mode. With USB Cable plugged You must press and hold Power + Vol Down button then count it for 7-8 seconds, after that immediately release Power button, and press Vol Up + Down. Repeat this step if fail. U will see Download mode.
Regards.
szymin22 said:
I got the same problem, i did this: Power + volume down next when it restarted fast pressed v+ and v- and plug in the cable before it showed samsung logo
Click to expand...
Click to collapse
Just need perfect count like 7-8 secs You will faced Download mode.
Regards.
farab1 said:
My phone got stuck at TWRP Loop!!
So, there is what i did...
I flashed Samsung a7 firmware ANDROID 10 [download from firja] and it worked. I needed to root my phone and tried Magisk new app.
But, with new Firmware I did not had TWRP installed, so I flashed TWRP with oden as instructed in this POST [BTW, I followed first method , not the *****OREO ROOT INSTRUCTIONS:***** ].
** TWRP version is 3.2.3-1_ashyx **
After that my phone got stuck at TWRP Loop.
Phone will not boot to normal , only BOOTLOOP to TWRP. Most of the time TWRP doesn't load fully and TWRP screen seams Black Line [in horizontal axix, MY phone display fine, it seems come from The TWRP!! ].
So, I am kinda STUCK at this TWRP Loop and TWRP load at it LOGO nothing more.
I tried every possible KEY combination to get to the fastboot mode/download mode but failed.
One or TWO time I was able[or it did it self!] to boot into TWRP (TWRP loaded but , with BLACK line) , i tried to enter download mode but failed.
So, what can i do?
-Thanks
Click to expand...
Click to collapse
You hold volume down + power button for 7 seconds and phone will be power off.
Then you press both volume buttons (vol up + vol down) and plug in cable what is connected to computer, this pusch you to download mode of phone.
farab1 said:
My phone got stuck at TWRP Loop!!
So, there is what i did...
I flashed Samsung a7 firmware ANDROID 10 [download from firja] and it worked. I needed to root my phone and tried Magisk new app.
But, with new Firmware I did not had TWRP installed, so I flashed TWRP with oden as instructed in this POST [BTW, I followed first method , not the *****OREO ROOT INSTRUCTIONS:***** ].
** TWRP version is 3.2.3-1_ashyx **
After that my phone got stuck at TWRP Loop.
Phone will not boot to normal , only BOOTLOOP to TWRP. Most of the time TWRP doesn't load fully and TWRP screen seams Black Line [in horizontal axix, MY phone display fine, it seems come from The TWRP!! ].
So, I am kinda STUCK at this TWRP Loop and TWRP load at it LOGO nothing more.
I tried every possible KEY combination to get to the fastboot mode/download mode but failed.
One or TWO time I was able[or it did it self!] to boot into TWRP (TWRP loaded but , with BLACK line) , i tried to enter download mode but failed.
So, what can i do?
-Thanks
Click to expand...
Click to collapse
It also happened to me two days ago. The solution is the replays there are many people sayid to you↑
But i cant install it to now if If you have successfully installed TWRP with no issues please contact me and sayd me i such you want it thank you for reply
play 5 said:
It also happened to me two days ago. The solution is the replays there are many people sayid to you↑
But i cant install it to now if If you have successfully installed TWRP with no issues please contact me and sayd me i such you want it thank you for reply
Click to expand...
Click to collapse
do yours Fastboot mode works ?
means command
right now I start a new project about recovery for SM-A750FN its new maybe we find right recovery for you.
fastboot devices
Click to expand...
Click to collapse
Krys89 said:
do yours Fastboot mode works ?
means command
right now I start a new project about recovery for SM-A750FN its new maybe we find right recovery for you.
Click to expand...
Click to collapse
If you mean Fastboot when I go to the official a750fn recovery there are a part his name install update from adb
If you mean it Im trayed only this command Fastboot reboot and after phone boted to OS
A think it mean its work right?
Or if fastboot the download mode yes it is work
Waiting your reply
Shutdown the device and then push (volume up + volume down) and put connected to computer usb cable to entrence download mode
use then command
fastboot devices
Click to expand...
Click to collapse
it must show the id of device
Krys89 said:
Shutdown the device and then push (volume up + volume down) and put connected to computer usb cable to entrence download mode
use then command
it must show the id of device
Click to expand...
Click to collapse
I used these command many time but in adb mode
exactly this is the thing I missing the Fastboot mode to...
Hi, Bennie from Holland here, with the same problem: tried to flash Twrp to the Samsung A750FN and now stuck in not working Twrp logo, flashing for 2 seconds and further a black screen< The fastboot using Odin can be used via the method described by szimin22, bur the adb fastboot gives no response. Does someone know the correct trwp version for this mobile or a firmware file that can be flashed by Odin?
A Week Later ...
i have installed on the a7 the firmware dated okt 2020 and i can install without any prob trwrp or PBRP! but the machine goes into bootloop again. The only thing which seems to be resolved is a normal functional recovery. Now the return to the phone itself and we are home! any suggestions, pls give us a chance to not smash the a7 through the kitchenwindow
So on my OnePlus Nord CE 2 Lite I was trying to root it. So I did everything extracted the boot image, patched it, flashed it and when my phone starts up it shows this boot animation and then it asks me for my pin. But when i try to input it the nothing happens the touch screen is not recognizing my touches. It can't be a hardware issue because I got the phone today and it worked like an hour ago before doing the rooting. When i boot into the pin screen and try to use adb to reboot it says: error: insufficient permissions for device. Then after a while the phone reboots so this is practically a boot loop. When i try booting up the phone it is really weird it starts the boot up process after a while and it shows the android and OnePlus booting screen then it has the red dot with the white dots going around it and then a black screen and then it either restarts again or it shows the pin screen.
I followed this guide: https://forum.xda-developers.com/t/rooting-oneplus-nord-2-ce-lite.4500297/
...download the correct firmware version for your device (EU / India), bring up fastboot, change slot, flash firmware and done ...the only thinkable reason is, you didn't wait until the phone downloaded the OTA update after unpacking it "one hour" before
I tried to wipe data but then I got stuck on a screen that requires a verification code that I obviously can't enter. And I can't reboot I have tried everything. When I hold the power button and nothing happens at all. I guess I have to wait for the battery to run out.
Okay, so now I got out of that using vol+ and power. But now I realized that the problem is that I had a different version of the boot image compared to other partitions. For example the boot image is like version 3.27 but everything else is version 2.85 (Those aren't actual versions just an example) But when I try to flash the system, vendor and product image it says: remote: '(system_a) No such partition'
or whatever image I'm trying to flash like product_a or vendor_a
Everything else works just those don't and the phone boots into recovery mode but I still can't use touch controls.
use "OppoRealme-OFP-Flash_1.0-x64_Windows" it will flash every thing.
//edit : one time it worked.
After i bricked in again. It's not working. Boot loops