hi I've been trying to fix my tablet for the past week and ive been using odin3 1.85 and i have downloaded the stock firmware for samfirmware or sammobile. finally yesterday i got the firmware to work but on to about 80% it would stop when it gets to Hidden.img and i have been searching for a fix or something that i can do to fix it nonstop already and i have not found anything that can fix this problem and im desperate right because i just want to get my tablet up and running perfectly with the stock rom. please help me ill try anythiing that you would think would for my tablet i do have Teamviewer if you are interested in helping me through there and i do have windows 8 and also tried it on windows 7 but its the same error. please and thank you.
the odin message:
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> Enter CS for MD5..
<ID:0/007> Leave CS..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.img
<ID:0/007> recovery.img
<ID:0/007> system.img
<ID:0/007> cache.img
<ID:0/007> hidden.img
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
This is Note forum not Tab .
AS you are on the wrong forum are you trying to flash the wrong firmware as well ???
jje
oops sorry im so retarted i read wrong sorry
Related
Hi all,
Today I upgraded from a Thunderbolt to an S3, and before I even left the store the guy was upgrading to the latest version of 4.1.2 which came out a few days ago.
I've been following this tutorial, which is basically the same as all the other tutorials - install Samsung USB drivers on Windows machine, download CF-Root-SGS3-v6.4.tar and use ODIN 3.04 or 1.85 to flash while in download mode.
I've done all that, and when I use either version of ODIN, I get the following:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
I don't even get a green light in 3.04 - just a blue light. In 1.85 I get a yellow light.
I see this on my phone:
SECURE CHECK FAIL: recovery
I see this on the phone's screen twice, as I tried to flash it with ODIN 3.04 and 1.85.
Any ideas? Could this be a direct result of the most recent software update?
Thanks in advance for any light shed on this issue.
Since I have a low post count I am unable to post the link, but it was on droidviews.
djcronos said:
Since I have a low post count I am unable to post the link, but it was on droidviews.
Click to expand...
Click to collapse
As you do not have I9300 any firmware root from this I9300 forum may brick your not a I9300 phone ,read the sticky top of the page please .
jje
Jee speaks the truth. Even though you have a galaxy S3 the original s3 in Europe is not the same as here in the states (i535). I went into the development section of xda in the i535 Verizon section and d/l the tar file foe my phone. Worked great with Odin
Sent from my SCH-I535 using Tapatalk 2
djcronos said:
Hi all,
Today I upgraded from a Thunderbolt to an S3, and before I even left the store the guy was upgrading to the latest version of 4.1.2 which came out a few days ago.
I've been following this tutorial, which is basically the same as all the other tutorials - install Samsung USB drivers on Windows machine, download CF-Root-SGS3-v6.4.tar and use ODIN 3.04 or 1.85 to flash while in download mode.
I've done all that, and when I use either version of ODIN, I get the following:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
...
SECURE CHECK FAIL: recovery
Click to expand...
Click to collapse
Same thing here.
Verizon GS3 sch-I535
Android version: 4.1.2
Build: JZO54K.I535VRBMB1
It fails after the build chain while trying to flash recovery.
Any help would be appreciated!
http://forum.xda-developers.com/showthread.php?t=2046439
Try this method!
djcronos said:
Hi all,
Today I upgraded from a Thunderbolt to an S3, and before I even left the store the guy was upgrading to the latest version of 4.1.2 which came out a few days ago.
I've been following this tutorial, which is basically the same as all the other tutorials - install Samsung USB drivers on Windows machine, download CF-Root-SGS3-v6.4.tar and use ODIN 3.04 or 1.85 to flash while in download mode.
I've done all that, and when I use either version of ODIN, I get the following:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
I don't even get a green light in 3.04 - just a blue light. In 1.85 I get a yellow light.
I see this on my phone:
SECURE CHECK FAIL: recovery
I see this on the phone's screen twice, as I tried to flash it with ODIN 3.04 and 1.85.
Any ideas? Could this be a direct result of the most recent software update?
Thanks in advance for any light shed on this issue.
Click to expand...
Click to collapse
here is "how to" just to root your new phone without unlocking and flashing bootloader etc...check post#6
http://forum.xda-developers.com/show...9#post39980019
djteotancolis said:
http://forum.xda-developers.com/showthread.php?t=2046439
Try this method!
Click to expand...
Click to collapse
This works, I am running 4.1.2 and was able to root, unlock and flash. Very easy
Sent from my SCH-I535 using Tapatalk 2
Hello,
I'm having problem flashing the orignal firmware package for galaxy Y.
I'm using ODIN v1.85 And downloaded the (Indian) firmware packages form [URL="http://forum.xda-developers.com/showthread.php?t=1465800"[/URL]
It gives me the following messages:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
When I restart my phone it would boot into in custom ROM.
Screen shots attached...
Please help me....
Thank you.
Try flashing it again with another odin file/firmware. Did you a get a green progress bar on your phone while odin process was going on?
Use the odin i am giving here.
https://www.dropbox.com/s/tc32llywhly4nb0/Odin3-v1.85.zip
______________________________________
A HeRo can be AnyOne....© even a PO TA TOE....
Thank you very much i actually flashed another package and its done thanks for your help.:laugh::good:
Just as an added note, always make sure you do an MD5 check on anything you are about to flash in Odin.
This is what happen. Verizon just update my gs3 with 4.3 firmware, but I don't like it. So I just flash the stock ROM using Odin without my phone rooted and a locked bootloader. Now my phone is booted with a error. "System software not authorized by Verizon Wireless has been found on your phone. Please turn off your phone and go to the nearest Verizon Wireless store for help. " I tried the Root that roots 4.2 didn't work either. Now my phone is stuck and can't use anymore. please help!!!!! :crying::crying::crying:
This is the message stream from ODIN:
<ID:0/007> Removed!!
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.img
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Mistake 1 u took the OTA 4.3
ur bootloader is permanently lock for now u can root but cant flash custom recovery nor rom
since u did that u pretty much brick ur fone
refer to the 4.3 thread how to unbrick ur fone
sanf415 said:
This is what happen. Verizon just update my gs3 with 4.3 firmware, but I don't like it. So I just flash the stock ROM using Odin without my phone rooted and a locked bootloader. Now my phone is booted with a error. "System software not authorized by Verizon Wireless has been found on your phone. Please turn off your phone and go to the nearest Verizon Wireless store for help. " I tried the Root that roots 4.2 didn't work either. Now my phone is stuck and can't use anymore. please help!!!!! :crying::crying::crying:
This is the message stream from ODIN:
<ID:0/007> Removed!!
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.img
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
You just soft brick your phone. You should able to get into download mode and go here to fix your issue http://forum.xda-developers.com/showthread.php?t=2586319
buhohitr said:
You just soft brick your phone. You should able to get into download mode and go here to fix your issue http://forum.xda-developers.com/showthread.php?t=2586319
Click to expand...
Click to collapse
Your my Super Hero, you save my life there!!! Thank you so much!!!! I love you so much man :angel:
Bought this Tab yesterday, seller said it only boots to download mode, he's right!!
I tried rooting and installing recovery and this is what i get
A big red FAIL and
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
Am I screwed??
Can this be fixed?? Thanks guys!
You need to restore the partition information table PIT .
How sorry not sure enough to give advice there are a number of posts .
http://forum.xda-developers.com/showthread.php?t=2268735&page=5
Thanks for the help but I need much more help than that. I need a tut or step by step directions. Ive seached everywhere I can think of. I found the one you posted also but I hvae no clue how to use any of the info. I have successfully rooted and fixed a few devices but this is like a whole other level. Thanks
Howdy everyone! Im a new member, but Ive been using the site since the HTC G1 from T-Mobile
I have a G900P Galaxy S5 for Boost Mobile. (It was on 5.0 if that changes anything) I bought the phone, played with it for a few days before I would decide to activate it. I hit the reactivation lock thinking it would be safe if anything were to happen to it, then when I activated it and it updated the Profile, PRL and whatever else for activation, it got pissed off and said
"custom binary blocked by reactivation lock"
Ive tried using Odin to bring me back, but I cannot load the NKD lollipop bootloader, phone says:
SW rev check fail : [tz] Fused 3 > Binary 1
Odin says:
<ID:0/005> Odin engine v(ID:3.1100)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> NON-HLOS.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
I tried adding the stock Rom (G900P_NKD_FullRestore) also using Odin, but that also makes it upset
Odin Says:
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1100)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Now the phone says
Firmware upgrade encountered an issue. Please Select recovery mode in Kies and try again
Do I start to cry over my new paperweight here?
I hope Im not totally dead in the water here. What should I do? and what is possible at this point?
Kies will restore it to latest firmware or you can odin the latest. The phone has newer firmware on it than you where trying to flash it looks like. Cant downgrade to that one.
Ok, if I download a newer firmware, will I need the bootloader installed? Or do I need a newer bootloader too?
If you download the stock firmware it will have the bootloader and all in it. Thats one of the reasons as to why the file is so big. You can download the firmware from your cell provider or you can download one from here http://www.sammobile.com/firmwares/ also, you can find rooted and stock roms here at XDA. Just make sure you download the rom that is for your phone!
got it, Ok cool! Im using Rwilco12's site. Im going to try this again, wish me luck!
IT WORKED!
YAY! Thanks guys!
Same issue
keepinitril said:
got it, Ok cool! Im using Rwilco12's site. Im going to try this again, wish me luck!
IT WORKED!
YAY! Thanks guys!
Click to expand...
Click to collapse
Could you possibly list the steps you used to recover your phone ? i'm having the exact same issue and am trying to restore my phone. I just cannot seem to locate a working download. Also i want to make sure I do everything correctly.
Download Odin
Download your rom from RWilco12
http://rwilco12.com/downloads.php?dir=Files/Devices/
Put your phone into download mode
use Odin (give it time)
done
Thank you! Got it working again. You just saved me getting a whole new phone.
Reactivation Lock
autotech40 said:
Kies will restore it to latest firmware or you can odin the latest. The phone has newer firmware on it than you where trying to flash it looks like. Cant downgrade to that one.
Click to expand...
Click to collapse
I have same issue & and i have running lollipop (bok4) . please give me solution for get rid of reactivation lock. I have tried many roms to flash but field by this error also Rwilco12's.
Odin says:
<ID:0/005> Odin engine v(ID:3.1100)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> NON-HLOS.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1