[q] need help please!! - Verizon Samsung Galaxy S III

This is what happen. Verizon just update my gs3 with 4.3 firmware, but I don't like it. So I just flash the stock ROM using Odin without my phone rooted and a locked bootloader. Now my phone is booted with a error. "System software not authorized by Verizon Wireless has been found on your phone. Please turn off your phone and go to the nearest Verizon Wireless store for help. " I tried the Root that roots 4.2 didn't work either. Now my phone is stuck and can't use anymore. please help!!!!! :crying::crying::crying:
This is the message stream from ODIN:
<ID:0/007> Removed!!
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.img
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)

Mistake 1 u took the OTA 4.3
ur bootloader is permanently lock for now u can root but cant flash custom recovery nor rom
since u did that u pretty much brick ur fone
refer to the 4.3 thread how to unbrick ur fone

sanf415 said:
This is what happen. Verizon just update my gs3 with 4.3 firmware, but I don't like it. So I just flash the stock ROM using Odin without my phone rooted and a locked bootloader. Now my phone is booted with a error. "System software not authorized by Verizon Wireless has been found on your phone. Please turn off your phone and go to the nearest Verizon Wireless store for help. " I tried the Root that roots 4.2 didn't work either. Now my phone is stuck and can't use anymore. please help!!!!! :crying::crying::crying:
This is the message stream from ODIN:
<ID:0/007> Removed!!
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.img
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
You just soft brick your phone. You should able to get into download mode and go here to fix your issue http://forum.xda-developers.com/showthread.php?t=2586319

buhohitr said:
You just soft brick your phone. You should able to get into download mode and go here to fix your issue http://forum.xda-developers.com/showthread.php?t=2586319
Click to expand...
Click to collapse
Your my Super Hero, you save my life there!!! Thank you so much!!!! I love you so much man :angel:

Related

galaxy tab 10.1 tmobile (SGH-T859) HELP with odin

hi I've been trying to fix my tablet for the past week and ive been using odin3 1.85 and i have downloaded the stock firmware for samfirmware or sammobile. finally yesterday i got the firmware to work but on to about 80% it would stop when it gets to Hidden.img and i have been searching for a fix or something that i can do to fix it nonstop already and i have not found anything that can fix this problem and im desperate right because i just want to get my tablet up and running perfectly with the stock rom. please help me ill try anythiing that you would think would for my tablet i do have Teamviewer if you are interested in helping me through there and i do have windows 8 and also tried it on windows 7 but its the same error. please and thank you.
the odin message:
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> Enter CS for MD5..
<ID:0/007> Leave CS..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> boot.img
<ID:0/007> recovery.img
<ID:0/007> system.img
<ID:0/007> cache.img
<ID:0/007> hidden.img
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
This is Note forum not Tab .
AS you are on the wrong forum are you trying to flash the wrong firmware as well ???
jje
oops sorry im so retarted i read wrong sorry

Upgraded to a Verizon S3 today, store upgraded it to 4.1.2, cannot root

Hi all,
Today I upgraded from a Thunderbolt to an S3, and before I even left the store the guy was upgrading to the latest version of 4.1.2 which came out a few days ago.
I've been following this tutorial, which is basically the same as all the other tutorials - install Samsung USB drivers on Windows machine, download CF-Root-SGS3-v6.4.tar and use ODIN 3.04 or 1.85 to flash while in download mode.
I've done all that, and when I use either version of ODIN, I get the following:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
I don't even get a green light in 3.04 - just a blue light. In 1.85 I get a yellow light.
I see this on my phone:
SECURE CHECK FAIL: recovery
I see this on the phone's screen twice, as I tried to flash it with ODIN 3.04 and 1.85.
Any ideas? Could this be a direct result of the most recent software update?
Thanks in advance for any light shed on this issue.
Since I have a low post count I am unable to post the link, but it was on droidviews.
djcronos said:
Since I have a low post count I am unable to post the link, but it was on droidviews.
Click to expand...
Click to collapse
As you do not have I9300 any firmware root from this I9300 forum may brick your not a I9300 phone ,read the sticky top of the page please .
jje
Jee speaks the truth. Even though you have a galaxy S3 the original s3 in Europe is not the same as here in the states (i535). I went into the development section of xda in the i535 Verizon section and d/l the tar file foe my phone. Worked great with Odin
Sent from my SCH-I535 using Tapatalk 2
djcronos said:
Hi all,
Today I upgraded from a Thunderbolt to an S3, and before I even left the store the guy was upgrading to the latest version of 4.1.2 which came out a few days ago.
I've been following this tutorial, which is basically the same as all the other tutorials - install Samsung USB drivers on Windows machine, download CF-Root-SGS3-v6.4.tar and use ODIN 3.04 or 1.85 to flash while in download mode.
I've done all that, and when I use either version of ODIN, I get the following:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
...
SECURE CHECK FAIL: recovery
Click to expand...
Click to collapse
Same thing here.
Verizon GS3 sch-I535
Android version: 4.1.2
Build: JZO54K.I535VRBMB1
It fails after the build chain while trying to flash recovery.
Any help would be appreciated!
http://forum.xda-developers.com/showthread.php?t=2046439
Try this method!
djcronos said:
Hi all,
Today I upgraded from a Thunderbolt to an S3, and before I even left the store the guy was upgrading to the latest version of 4.1.2 which came out a few days ago.
I've been following this tutorial, which is basically the same as all the other tutorials - install Samsung USB drivers on Windows machine, download CF-Root-SGS3-v6.4.tar and use ODIN 3.04 or 1.85 to flash while in download mode.
I've done all that, and when I use either version of ODIN, I get the following:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
I don't even get a green light in 3.04 - just a blue light. In 1.85 I get a yellow light.
I see this on my phone:
SECURE CHECK FAIL: recovery
I see this on the phone's screen twice, as I tried to flash it with ODIN 3.04 and 1.85.
Any ideas? Could this be a direct result of the most recent software update?
Thanks in advance for any light shed on this issue.
Click to expand...
Click to collapse
here is "how to" just to root your new phone without unlocking and flashing bootloader etc...check post#6
http://forum.xda-developers.com/show...9#post39980019
djteotancolis said:
http://forum.xda-developers.com/showthread.php?t=2046439
Try this method!
Click to expand...
Click to collapse
This works, I am running 4.1.2 and was able to root, unlock and flash. Very easy
Sent from my SCH-I535 using Tapatalk 2

[Q]Please Help!!!!!! Wrong recovery flashed on SGH-i337 At&t S4

By mistake I Flashed Philz touch recovery on my s4 i337 through a phone application "RASHR" and when i restarted my Phone it says
"System Software not authorized by AT&T has been found on your phone. Please turn off your phone and go to the nearest At&t store for help"
The I googled it and found that my phone is softbricked and I have to reflash the stock rom. Then i downloaded the stock roms I337UCUAMDB and I337UCUAMDL .
But while flashing them I get this
Log:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
The phone displays this:
Start [224, 1440]
SV REV. CHECK FAIL : FUSED : 2, BINARY : 1
I get this message from both the above roms.
Please help!!!!! :crying: :crying: :crying:
Amisaini said:
By mistake I Flashed Philz touch recovery on my s4 i337 through a phone application "RASHR" and when i restarted my Phone it says
"System Software not authorized by AT&T has been found on your phone. Please turn off your phone and go to the nearest At&t store for help"
The I googled it and found that my phone is softbricked and I have to reflash the stock rom. Then i downloaded the stock roms I337UCUAMDB and I337UCUAMDL .
But while flashing them I get this
Log:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
The phone displays this:
Start [224, 1440]
SV REV. CHECK FAIL : FUSED : 2, BINARY : 1
I get this message from both the above roms.
Please help!!!!! :crying: :crying: :crying:
Click to expand...
Click to collapse
At your service
What version of android were you on before, was it 4.3 or later touchwiz? also can you boot to recovery?
REMEMBER TO HIT THAT THANKS BUTTON IF I HELPED

Cant stock flash Samsung Galaxy S6

So I softbricked my phone by messing up during rooting it with Odin.
Now when I try to stock flash using Odin, this error shows up
<ID:0/007> Odin engine v(ID:3.1203)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The firmware is correct, it's SM-G920W8 from Bell, it's the latest version of Odin, and I've tried so many things but it just says FAIL each time.
When I exit download mode, via battery pull, it the booting screen starts up, then it just goes black. Additionally, in the top left corner, it says: Kernel is not Seandroid reinforcing.
Smartswitch also doesnt work as the emergency function wont recognize my phone
Thanks

Softbrick after trying to root, can't flash firmare with Odin

So, I tried to root an s8+ SM G955F. I guess I didn't take some measures and triggered the Knox security.
I tried to make something work from safe mode and wanted to uninstall TWRP app. After that I got hit by the \only official released binaries are allowed to be flashed\ message every time i tried to boot. I can go to download mode only.
I try to flash stock firmware via Odin and it says fail. Here is the log:
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> NAND Write Start!!
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> up_param.bin
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can someone help me?
Shadοw Force said:
So, I tried to root an s8+ SM G955F. I guess I didn't take some measures and triggered the Knox security.
I tried to make something work from safe mode and wanted to uninstall TWRP app. After that I got hit by the \only official released binaries are allowed to be flashed\ message every time i tried to boot. I can go to download mode only.
I try to flash stock firmware via Odin and it says fail. Here is the log:
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> NAND Write Start!!
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> up_param.bin
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can someone help me?
Click to expand...
Click to collapse
Might need more information like:
Current firmware?
Firmware trying to flash?
Odin version?
Could be wrong but sounds like flashing wrong or downgraded firmware.

Categories

Resources