So I softbricked my phone by messing up during rooting it with Odin.
Now when I try to stock flash using Odin, this error shows up
<ID:0/007> Odin engine v(ID:3.1203)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The firmware is correct, it's SM-G920W8 from Bell, it's the latest version of Odin, and I've tried so many things but it just says FAIL each time.
When I exit download mode, via battery pull, it the booting screen starts up, then it just goes black. Additionally, in the top left corner, it says: Kernel is not Seandroid reinforcing.
Smartswitch also doesnt work as the emergency function wont recognize my phone
Thanks
Related
My galaxy note 10.1 is in a bootloop. Hardware buttons are not working for factory setting.
I tried Odin3 v1.85 with N8010XXUDNE4_N8010PHNDNF1_HOME.tar.md5 but i get :
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> sboot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have tried other USB-ports, no succes.
Can someone help me please?
Ok,
So I am trying to fix my dads phone which stopped working over the weekend and am at a total loss. The phone will ONLY boot into odin download mode. You can turn it on normally, can't get into recovery mode. I have already tried to flash the lastest stock TAR via odin and it installs fine, except nothing changes, still no recovery or boot.
OS I installed: G920PVPS4DQE2_G920PSPT4DQE2_G920PVPS4DQE2_HOME.tar .md5
ODIN Report
<ID:0/007> Odin engine v(ID:3.1100)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> cm.bin
<ID:0/007> boot.img
<ID:0/007> recovery.img
<ID:0/007> system.img
<ID:0/007> cache.img
<ID:0/007> modem.bin
<ID:0/007> RQT_CLOSE !!
<ID:0/007> RES OK !!
<ID:0/007> Removed!!
<ID:0/007> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Have tried Vol - & Power to simulate battery pull and then quickly pressing Vol + & Power to enter recovery ? A customer gave me an G920P too with the same problem but wasnt able to boot in anyway, i believe G92XP firmwares are bad in some way
Nope, can only get into ODIN. Repetedly went into ODIN mode and completely drained the battery and then did a full charge, still nothing.
Mods, please move/remove this if its in the wrong area.
I updated to Oreo via OTA on my G930T. It rebooted just fine. After I used it for awhile, my phone got super hot so I decided to power it down. I turned it back on and it would only get to the Galaxy S7 splash screen and no where else. I tried factory resetting and wiping cache via recovery and flashing the stock firmware again in Odin.
When I tried to flash in Odin, I tried Oreo and Nougat and this error comes up on the Download Mode screen: "Unsupport dev_type." I made sure that I had the right firmware. The File said SM-G930T and my phone says SM-G930T on the back and in Download Mode. I even reinstalled drivers and opened odin in both admin mode and normal mode.
I should also add that in recovery it says at the following:
#fail to open recovery_cause(No such file or directory)#
#Reboot Recovery Cause is [UNKNOWN]#
No Support SINGLE-SKU
Any ideas? I'm at a complete loss.
EDIT: Here's the log in Odin after I hit start:
<ID:0/007> Odin engine v(ID:3.1207)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> NAND Write Start!!
<ID:0/007> SingleDownload.
<ID:0/007> emmc_appsboot.mbn.lz4
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
try get regular Odin 3.13 version. i had same error when i used odin 3.12 patched one.
So, I tried to root an s8+ SM G955F. I guess I didn't take some measures and triggered the Knox security.
I tried to make something work from safe mode and wanted to uninstall TWRP app. After that I got hit by the \only official released binaries are allowed to be flashed\ message every time i tried to boot. I can go to download mode only.
I try to flash stock firmware via Odin and it says fail. Here is the log:
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> NAND Write Start!!
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> up_param.bin
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can someone help me?
Shadοw Force said:
So, I tried to root an s8+ SM G955F. I guess I didn't take some measures and triggered the Knox security.
I tried to make something work from safe mode and wanted to uninstall TWRP app. After that I got hit by the \only official released binaries are allowed to be flashed\ message every time i tried to boot. I can go to download mode only.
I try to flash stock firmware via Odin and it says fail. Here is the log:
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> NAND Write Start!!
<ID:0/007> SingleDownload.
<ID:0/007> sboot.bin
<ID:0/007> up_param.bin
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Can someone help me?
Click to expand...
Click to collapse
Might need more information like:
Current firmware?
Firmware trying to flash?
Odin version?
Could be wrong but sounds like flashing wrong or downgraded firmware.
Im trying to update my phone using odin but this happened:
Code:
<ID:0/007> Odin engine v(ID:3.1401)..
<ID:0/007> File analysis..
<ID:0/007> skip file list for home binary
<ID:0/007> param.bin
<ID:0/007> userdata.img
<ID:0/007> Home Binary Download
<ID:0/007> Total Binary size: 5608 M
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> NAND Write Start!!
<ID:0/007> SingleDownload.
<ID:0/007> preloader.img
<ID:0/007> lk-verified.img
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I tried to restart the flash but now its only this:
Code:
<ID:0/007> Odin engine v(ID:3.1401)..
<ID:0/007> File analysis..
<ID:0/007> skip file list for home binary
<ID:0/007> param.bin
<ID:0/007> userdata.img
<ID:0/007> Home Binary Download
<ID:0/007> Total Binary size: 5608 M
<ID:0/007> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
UPDATE:
discovered that i can still boot to download mode after all of that, but i still cant flash it (its still stuck as of now)
UPDATE:
turns out you only need the patched odin 14.1 here and try to flash again, although i only tried to reflash BL of the same firmware, no updates
DEVICE INFORMATION:
Samsung Galaxy A12 (SM-A125F XTC)
The Recent Firmware Flashed: A125FXXU2CVH1
The Firmware i tried to flash: A125FXXU2CWB1
you figured it out? or still need help?
TheWorldYT said:
you figured it out? or still need help?
Click to expand...
Click to collapse
slightly, i think something is still broken since the stock file manager is refusing to open