hello sorry for my English and this translation google
I wanted to know if it is possible to flash cwm 6.0.2.3 to 6.0.15?
now I can no longer make impossible to wipe and flash a rom except for udpate
I do not know if it comes from cwm
http://forum.xda-developers.com/showthread.php?t=1953917
This will flash it for you and give you root.
Related
please help me.. i tried to unroot my tf like in this thread http://forum.xda-developers.com/showthread.php?t=1154947
after i replaced the stock rom, i wiped all data and cache partition and reboot. but when i tried to instal stock recovery, on my screen appears the android logo with !
i want you 2 know that my tf is now without my apps, only with superuser.
please help me to unroot...
alyluk said:
please help me.. i tried to unroot my tf like in this thread http://forum.xda-developers.com/showthread.php?t=1154947
after i replaced the stock rom, i wiped all data and cache partition and reboot. but when i tried to instal stock recovery, on my screen appears the android logo with !
i want you 2 know that my tf is now without my apps, only with superuser.
please help me to unroot...
Click to expand...
Click to collapse
You are on stock recovery if you get the !
You probably mistakenly flash the stock recovery before you flash the repacked ROM.
Easiest thing to do now is install CWM recovery again.
Download a stock firmware from Asus website and flash it with CWM recovery.
That will put you at stock firmware, unrooted and stock recovery.
baseballfanz said:
You are on stock recovery if you get the !
You probably mistakenly flash the stock recovery before you flash the repacked ROM.
Easiest thing to do now is install CWM recovery again.
Download a stock firmware from Asus website and flash it with CWM recovery.
That will put you at stock firmware, unrooted and stock recovery.
Click to expand...
Click to collapse
i installed the CWM recovery and now i don't know how to instal the stock firmware.. i tried with reboot to recovery and install from memory card but without luck.. please tell me how to install... (i want you to know that i`m noob because is my firs android device)
thanks
alyluk said:
i installed the CWM recovery and now i don't know how to instal the stock firmware.. i tried with reboot to recovery and install from memory card but without luck.. please tell me how to install... (i want you to know that i`m noob because is my firs android device)
thanks
Click to expand...
Click to collapse
What CWM version are you using? If its the lastest from Roach, it only flashes from the internal memory, not from sd card.
linuques said:
What CWM version are you using? If its the lastest from Roach, it only flashes from the internal memory, not from sd card.
Click to expand...
Click to collapse
i'm using rogue xm recovery 1.3.0 ( cwm-based recovery v5.0.2.7 )
I've made somehow to install android 4.0.3 )
Thanks guys for answers:d
Hi!
I'm actually Gio user, my friend has Galaxy Fit. And he is asking me some help for installing CM7.
After do some research at devv section. I found this CWM recovery [DEV] Clockworkmod Recovery for GT-S5670.
It's said the recovery doesn't support RFS file system, and won't work at Stock ROM. My friend running GB 2.3.6 Stock ROM.
In Gio there is moded flashable CWM recovery via stock recovery mode, while this one using Odin.
So I'm afraid to brick his device, since this recovery doesn't support RFS system and I could flash wrong file using Odin.
So, I need some advice and detailed step to flash CWM based recovery in stock ROM for installing CM7 for his Fit.
I appreciate all of your effort and time for helping me
That cwm doesn't support backup and restore if rfs (stock)...so after installing that cwm, you need to flash a custom rom (non cyanogen first, preferably)...then you shall be able to use nandroid backups and restore feature...
Backups feature only for custom ext4 roms (all are), not for stock rfs...
Get it?
(P.s. read the sticky, everything is there )
Typed using a small touchscreen
Good Morning,
After searching all of 100 pages in the post for the Hydro rom I have a question that I didnt find in the thread.Im on latest JB/OTA update for my TF300t and I have flashed the CWM recovery after unlocking my bootloader.Now,I want to install the latest Hydro rom but the developer is suggesting the latest TWRP for the rom.
My question is,will i be able to flash the rom using CWM or do I have to use twrp?If so will i end up with a brick if i side load twrp along cwm?
The only place i didnt check is the youtube video instructions since im on a restricted network...
Anyone?
Im really itchy to flash the new rom I just need to know if i can flash both cwm and twrp or if it is safe with cwm already installed to flash twrp on top of it.
sapaira said:
Anyone?
Im really itchy to flash the new rom I just need to know if i can flash both cwm and twrp or if it is safe with cwm already installed to flash twrp on top of it.
Click to expand...
Click to collapse
It is an either or situation. There is one recovery partition and you can have stock, cwm, or twrp. You can't have more than recovery installed at a time.
There are a lot of issues being reported with cwm recently. Since the op says twrp I used twrp. It may or may not work with cwm.
Be aware that a backup made with cwm probably won't restore with twrp or the other way around.
Good Luck!
A while ago i rooted my phone and put a custom rom on it, liked it the got sick of it then flashed back to stock . a day or two later i instantly regretted this decision so i reverted back. This was a very drawn out process because my phone was being dumb etc, i initially tried to flash TWRP on it which worked , but it never flashed roms correctly for me , so i flashed CWM on it and that worked. flashed a rom , and it worked. I now want to flash a new rom but when i boot to recovery , TWRP is still there but when i am in Rom manager, it says CWM 6.0.3.1 is installed.
Is there a way to use odin to flash this back to stock and just flash CWM on the so i can get on with my life and flash new roms?
TL;DR
there are 2 recoveries (TWRP and CWM)
TWRP is accessible but doesn't work
need access to CWM
is there odin or a type of software i can use to solve this ?
I know i ****ed up pretty good, any help would be greatly appreciated!
Download GooManager from the Playstore. Then from GooManager run OpenRecoveryScript which will flash the latest TWRP.
elbee222 said:
Download GooManager from the Playstore. Then from GooManager run OpenRecoveryScript which will flash the latest TWRP.[/QUOTE
can i flash CWN instead?
Click to expand...
Click to collapse
I'm pretty sure that GooManager will install only TWRP. I would start there to fix your problem, since GooManager will install the recovery easily. Once you have TWRP you can switch by installing CWM if you'd like. For that, see http://forum.xda-developers.com/showthread.php?t=2305721
Hello, first of all I apalogize for my english.
I had no problem to unlock bootloader and root. Then I installed CMW and flashed faux's kernel.
But I could not install the last OTA so I decided to go back to stock kernel and stock recovery. OTA still gave me an error message during installation so I given up. Root access was lost.
I went back to faux's kernel and CMW recovery but now it's impossible to root
The first time I rooted with no problem I used this method : http://www.modaco.com/topic/366771-root-your-moto-g-option-1-superboot/
Is there something to do to get back the root access ??
Do you still have cwm as your recovery?
KitKat slo"g" slide
Yes I tried to root with stock recovery and kernel. And with CMW recovery and faux's kernel. It's not working
Edit : Each time I turn on the phone, I have apps optimization like if I had delete dalvik cache
Which cwm do you use at the beginning?
Which cwm did you flash later when you went back?
My recomandation would be to reflash motoboot.img and then stock recovery.img and erase cach and dalvik-cache.
Then you can start from scratch to get root.
Hi, i had the same problem and i rooted my moto with this:
http://forum.xda-developers.com/showthread.php?t=2585755
works perfect 4 me.
mokkami said:
Which cwm do you use at the beginning?
Which cwm did you flash later when you went back?
My recomandation would be to reflash motoboot.img and then stock recovery.img and erase cach and dalvik-cache.
Then you can start from scratch to get root.
Click to expand...
Click to collapse
At the beginning : CWM 6.0.4.6 and later it's the same version 6.0.4.6 but via MotoTool.
It doesn't work with your method. I have the french SFR ROM. If I flash the french retail ROM, could it work ?
Edit : Now it's ok for me, I installed the FR retail ROM, then the OTA. The first method I used to root didn't work so I flashed the supersu.motog.zip (given in the link of Dizzyrul3z) with CWM recovery. Now Everything is fine... until the next OTA ^^. Thanks to everybody