Good Morning,
After searching all of 100 pages in the post for the Hydro rom I have a question that I didnt find in the thread.Im on latest JB/OTA update for my TF300t and I have flashed the CWM recovery after unlocking my bootloader.Now,I want to install the latest Hydro rom but the developer is suggesting the latest TWRP for the rom.
My question is,will i be able to flash the rom using CWM or do I have to use twrp?If so will i end up with a brick if i side load twrp along cwm?
The only place i didnt check is the youtube video instructions since im on a restricted network...
Anyone?
Im really itchy to flash the new rom I just need to know if i can flash both cwm and twrp or if it is safe with cwm already installed to flash twrp on top of it.
sapaira said:
Anyone?
Im really itchy to flash the new rom I just need to know if i can flash both cwm and twrp or if it is safe with cwm already installed to flash twrp on top of it.
Click to expand...
Click to collapse
It is an either or situation. There is one recovery partition and you can have stock, cwm, or twrp. You can't have more than recovery installed at a time.
There are a lot of issues being reported with cwm recently. Since the op says twrp I used twrp. It may or may not work with cwm.
Be aware that a backup made with cwm probably won't restore with twrp or the other way around.
Good Luck!
Related
So I just rooted my Verizon Galaxy S3 and unlocked the bootloader. I flashed Clockworkmod recovery using Rom Manager to update to the latest version. Made a nandroid, installed Titanium Backup, linked it to my Dropbox and uploaded. I downloaded the latest CM10 nightly to flash but the stock android recovery appeared instead of CWM. Found some info that I need to flash a clockwork compatible kernel first. The questions I have are: If I install the latest CM 10 nightly will it automatically install a clockwork compatable kernel? If not, where can I download it from? and if I do need to flash a kernel first can anyone give me detailed instructions how to do this as i'm relatively new to this stuff and don't want to brick my phone. Thanks, any info would help.
iwearthebelt said:
So I just rooted my Verizon Galaxy S3 and unlocked the bootloader. I flashed Clockworkmod recovery using Rom Manager to update to the latest version. Made a nandroid, installed Titanium Backup, linked it to my Dropbox and uploaded. I downloaded the latest CM10 nightly to flash but the stock android recovery appeared instead of CWM. Found some info that I need to flash a clockwork compatible kernel first. The questions I have are: If I install the latest CM 10 nightly will it automatically install a clockwork compatable kernel? If not, where can I download it from? and if I do need to flash a kernel first can anyone give me detailed instructions how to do this as i'm relatively new to this stuff and don't want to brick my phone. Thanks, any info would help.
Click to expand...
Click to collapse
Did you unlock your bootloader? for a custom recovery to stick you need to unlock your bootloader. Follow this guide
http://forum.xda-developers.com/showthread.php?t=1762709
darkhawk3383 said:
Did you unlock your bootloader? for a custom recovery to stick you need to unlock your bootloader. Follow this guide
http://forum.xda-developers.com/showthread.php?t=1762709
Click to expand...
Click to collapse
I did, had it unlocked and rooted. I guess there was some sort of issue with Rom Manager on the S3. I use it on my Galaxy Nexus and have no issues. I ended up abandoning what I was doing, uninstalling Rom Manager and going a different route. I have no prior experience with Odin but figured out how to install CWM . Downloaded I535vrblk1, flashed CWM, unlocked & rooted again. . Thanks anyway for the reply.
You can reinstall ROM Manager. It is something to do with some of the newer OTA's and the leaks. I have read a few posts in the forums about this in the GS3 and I really can't remember the fix but your recovery not sticking had nothing to do with ROM Manager. I think the fix was when you rebooted to recovery to flash a kernel right away, whether it be KT747, LK, or any of the other. Now that I typed this I'm about 99% sure that was the fix. Like I said above though, it has nothing to do.with ROM Manager, so if you're like me and find a lot of the tools in it handy you should be able to reinstall it. If you have a problem again just flash a kernel.
Sent from one of the many Anthropomorphic Personalities on the Disc
A while ago i rooted my phone and put a custom rom on it, liked it the got sick of it then flashed back to stock . a day or two later i instantly regretted this decision so i reverted back. This was a very drawn out process because my phone was being dumb etc, i initially tried to flash TWRP on it which worked , but it never flashed roms correctly for me , so i flashed CWM on it and that worked. flashed a rom , and it worked. I now want to flash a new rom but when i boot to recovery , TWRP is still there but when i am in Rom manager, it says CWM 6.0.3.1 is installed.
Is there a way to use odin to flash this back to stock and just flash CWM on the so i can get on with my life and flash new roms?
TL;DR
there are 2 recoveries (TWRP and CWM)
TWRP is accessible but doesn't work
need access to CWM
is there odin or a type of software i can use to solve this ?
I know i ****ed up pretty good, any help would be greatly appreciated!
Download GooManager from the Playstore. Then from GooManager run OpenRecoveryScript which will flash the latest TWRP.
elbee222 said:
Download GooManager from the Playstore. Then from GooManager run OpenRecoveryScript which will flash the latest TWRP.[/QUOTE
can i flash CWN instead?
Click to expand...
Click to collapse
I'm pretty sure that GooManager will install only TWRP. I would start there to fix your problem, since GooManager will install the recovery easily. Once you have TWRP you can switch by installing CWM if you'd like. For that, see http://forum.xda-developers.com/showthread.php?t=2305721
Hi
At the weekend I tried to update my TF300T from CM10.1 to CM10.2. That didn't work as I ended up in a boot loop. Then I thought, maybe I need to flash the latest system blob.
So I did that, only to find that I then couldn't install anything from zip or sd card as the recovery would not mount anything at all. Still got fastboot, so I've tried TWRP 2.6. TWRP 2.5, TWRP 2.4 and CWM, none of them will mount anything at all.
So I find myself with stock ROM, but no way of rooting or installing any custom ROMs.
I'm sure I've made a bloop somewhere, so all suggestions to resolve welcome!
Thanks
Rob
What is your bootloader? Sometimes, if you reflash the same recovery, it *may* work properly the second time around.
I am using TWRP 2.6 with my 127.5 bootloader, just for your knowledge.
aarsyl said:
What is your bootloader? Sometimes, if you reflash the same recovery, it *may* work properly the second time around.
I am using TWRP 2.6 with my 127.5 bootloader, just for your knowledge.
Click to expand...
Click to collapse
That was the tip I needed - I knew I had the right bootloader but I had downloaded the wrong TWRP (I had flashed the JB version instead of the 4.3 version). Doh!
Now flashed CM10.2 and is running Android 4.3. CPU-Z tells me I'm rooted though at the moment I can't get any root apps to work with SuperSU. I'll leave that for another day!
Rob
Hello, I am having some problems installing a working recovery, here is my story... So first the device was 10.6.1.27.5 and its unrootable, so i downgraded to 10.6.1.15.3, where I installed TWRP recovery, and flashed CM 10.2 ROM, but it was too glitchy, so i wiped all data, and fastbooted 10.6.1.15.3 build and stock ROM. So I am now stock,
I am rooted using MottoChop method, and I cant install a custom recovery... I tryed to install TWRP 2.5.0.0 thats the version I was on before, and also tied 2.6.3.0, when flashing the .blob My device turns unresponsive, even when rebooting it with fastboot.
So left with no choice i tried flashing the .img one for JB, (Note: It is currently NOT a OTA update, but manual, so i used the 4.2 first)
I was Able to Flash the custom recovery 2.6.3.0 JB.img and it booted up and worked fine, but then it couldnt mount anything,
I was getting error message:
E: Cant mount /data
and so on... I then tried to flash 2.5.0.0 and got the same result.
GooManager cant find a recovery script for this device...I flashed the TF300T, since thats the kind i have not TF300TG
Im really lost now... I tried ClockworkManager to find a recovery and it said the same thing, I dont want to flash a CWM with flashboot since i here It is terrible.
Any Help Is greatly Appreciated
I notice that alot of these problems, I end up fixing myself... I fixed the issue
But If anyone ever comes into the same situation, heres the fix...
UPDATE to 10.6.27.5 (Yes newest version) Im using US...
Install openrecovery-twrp-2.5.0.0-tf300t-4.2.blob IMPORTANT dont flash the JB version because its only for OTA updates
Open recovery and TWRP will prompt you to install, and beleive it or not, but apparently you can root the newest version,
Just not With MottoChopper and other quick root methods!
If you have any more question, post!
I have the Nvidia Shield 16 Gig Wifi tablet and Ive only had it for about 2 months. I wanted to unroot and completely go back to out of the box settings. I flashed the stock recovery, and boot. When i flash system.img it says insufficient space. Im really freaking out over this. I now have CWM running as recovery, but im stuck in a bootloop/softbrick. Ive had this with other tablets before but it was fixable, Im stumped with this one. I really need help here. Please and thank you for help, I need it ASAP.
ProSniper54 said:
I have the Nvidia Shield 16 Gig Wifi tablet and Ive only had it for about 2 months. I wanted to unroot and completely go back to out of the box settings. I flashed the stock recovery, and boot. When i flash system.img it says insufficient space. Im really freaking out over this. I now have CWM running as recovery, but im stuck in a bootloop/softbrick. Ive had this with other tablets before but it was fixable, Im stumped with this one. I really need help here. Please and thank you for help, I need it ASAP.
Click to expand...
Click to collapse
So, basically you left your shield tablet without a rom installed? If you have CWM recovery, you could flash a Full OTA found here http://forum.xda-developers.com/shi...k-recovery-images-ota-library-guides-t2988881
It happened to me to. So I downloaded a Philz built in Jan (I googled it)**** and I flashed the full 2.1 ota.
You could flash the TWRP 2.8.5.0 found here:http://forum.xda-developers.com/showpost.php?p=58864006&postcount=90 and then flash the full ota.
Then, Im thinking, you could flash stock recovery. I'd recommend flashing TWRP though, I had a problem with CWM and I could not flash full 2.1 OTA with it.
PS: Did you try wiping system from CWM and then flashing system with fastboot?
****EDIT: I found the Philz I used: https://goo.im/devs/playground/shieldtablet/Philz_Touch-01-02-2015_14.18-TN8-WiFi.zip
but Ive moved forward to TWRP since I couldn't make nandroid backups with it.
NaminatoR1254jaime.sier said:
So, basically you left your shield tablet without a rom installed? If you have CWM recovery, you could flash a Full OTA found here http://forum.xda-developers.com/shi...k-recovery-images-ota-library-guides-t2988881
It happened to me to. So I downloaded a Philz built in Jan (I googled it)**** and I flashed the full 2.1 ota.
You could flash the TWRP 2.8.5.0 found here:http://forum.xda-developers.com/showpost.php?p=58864006&postcount=90 and then flash the full ota.
Then, Im thinking, you could flash stock recovery. I'd recommend flashing TWRP though, I had a problem with CWM and I could not flash full 2.1 OTA with it.
PS: Did you try wiping system from CWM and then flashing system with fastboot?
****EDIT: I found the Philz I used: https://goo.im/devs/playground/shieldtablet/Philz_Touch-01-02-2015_14.18-TN8-WiFi.zip
but Ive moved forward to TWRP since I couldn't make nandroid backups with it.
Click to expand...
Click to collapse
Okay I have to thank you a ton for getting my tablet working again. Only problem now, I cant system update anymore, I get an android guy with a red warning sign in him. Any suggestions?
ProSniper54 said:
Okay I have to thank you a ton for getting my tablet working again. Only problem now, I cant system update anymore, I get an android guy with a red warning sign in him. Any suggestions?
Click to expand...
Click to collapse
Probably because you have custom recovery still or you are rooted.
The android red guy happens bc you are rooted (it'll happen even if you have stock recovery).
To system update, you have to be without custom recovery AND unrooted.
EDIT: Im theoretically speaking. I am rooted, therefore, I dont update via OTA.
i tried to recover to factory but i am stuck at system.img which dun seem to be copying into my tablet i manage to flash twrp in and wat else can i do to make it working again?
thanks