Hello, I am having some problems installing a working recovery, here is my story... So first the device was 10.6.1.27.5 and its unrootable, so i downgraded to 10.6.1.15.3, where I installed TWRP recovery, and flashed CM 10.2 ROM, but it was too glitchy, so i wiped all data, and fastbooted 10.6.1.15.3 build and stock ROM. So I am now stock,
I am rooted using MottoChop method, and I cant install a custom recovery... I tryed to install TWRP 2.5.0.0 thats the version I was on before, and also tied 2.6.3.0, when flashing the .blob My device turns unresponsive, even when rebooting it with fastboot.
So left with no choice i tried flashing the .img one for JB, (Note: It is currently NOT a OTA update, but manual, so i used the 4.2 first)
I was Able to Flash the custom recovery 2.6.3.0 JB.img and it booted up and worked fine, but then it couldnt mount anything,
I was getting error message:
E: Cant mount /data
and so on... I then tried to flash 2.5.0.0 and got the same result.
GooManager cant find a recovery script for this device...I flashed the TF300T, since thats the kind i have not TF300TG
Im really lost now... I tried ClockworkManager to find a recovery and it said the same thing, I dont want to flash a CWM with flashboot since i here It is terrible.
Any Help Is greatly Appreciated
I notice that alot of these problems, I end up fixing myself... I fixed the issue
But If anyone ever comes into the same situation, heres the fix...
UPDATE to 10.6.27.5 (Yes newest version) Im using US...
Install openrecovery-twrp-2.5.0.0-tf300t-4.2.blob IMPORTANT dont flash the JB version because its only for OTA updates
Open recovery and TWRP will prompt you to install, and beleive it or not, but apparently you can root the newest version,
Just not With MottoChopper and other quick root methods!
If you have any more question, post!
Related
This is the story
I first installed Unlocked bootloader from asus, CWM recovery for tf300t, and then i used the update.zip to gain root access
I downloaded the CM nightly build, used CWM to backup, then flashed the CM ROM.
It was stuck on CM boot logo for about 30 min, so i restarted and cleared my cache.
I tried flashing again, and it was still stuck on boot.
I then restored to my backup, and now it is stuck on the original ASUS boot animation.
What do I do?
confuz said:
This is the story
I first installed Unlocked bootloader from asus, CWM recovery for tf300t, and then i used the update.zip to gain root access
I downloaded the CM nightly build, used CWM to backup, then flashed the CM ROM.
It was stuck on CM boot logo for about 30 min, so i restarted and cleared my cache.
I tried flashing again, and it was still stuck on boot.
I then restored to my backup, and now it is stuck on the original ASUS boot animation.
What do I do?
Click to expand...
Click to collapse
restore with cwm,ifyou can, to earlier version,working
then remove ClockWorkMod Recovery, by fastbooting TWRP instead...much more reliable (team win recovery)
then to root, theres a theres a batch script tool, that,when tablet is connected to pc, will run and reboot the tablet several times, rooting it.
ill look for the link, its in the forums here, debug,defug..something
there are other methods,that worked the best for me...
CM had been having issues, install CleanROM 2.1 HAS THE JB UPDATE V13 in it. its smooth
CyberdyneSystems said:
restore with cwm,ifyou can, to earlier version,working
then remove ClockWorkMod Recovery, by fastbooting TWRP instead...much more reliable (team win recovery)
then to root, theres a theres a batch script tool, that,when tablet is connected to pc, will run and reboot the tablet several times, rooting it.
ill look for the link, its in the forums here, debug,defug..something
there are other methods,that worked the best for me...
CM had been having issues, install CleanROM 2.1 HAS THE JB UPDATE V13 in it. its smooth
Click to expand...
Click to collapse
I have tried recovering with CWM, and restoring to factory settings.
Both didn't work.
confuz said:
I have tried recovering with CWM, and restoring to factory settings.
Both didn't work.
Click to expand...
Click to collapse
try this thread...otherwise...you need to RMA it to asus,or the store you bought it from
http://www.scottsroms.com/showthread.php/1637-Tf300t-sku?p=13102#post13102
I am having the same issue installing any ASOP roms on my tf300t.
I have the TWRP recovery, gained root by flashing.
I can install ASUS based roms like CleanROM fine, but I cannot flash any ASOP roms like CM10.
Just curious on what is preventing us from doing this. Especially when our devices are supposedly "unlocked" with custom recoveries and root.
If this device still continues to be this locked up, I might just have to sell mine when the GN2 comes out.
k4killer said:
I am having the same issue installing any ASOP roms on my tf300t.
I have the TWRP recovery, gained root by flashing.
I can install ASUS based roms like CleanROM fine, but I cannot flash any ASOP roms like CM10.
Just curious on what is preventing us from doing this. Especially when our devices are supposedly "unlocked" with custom recoveries and root.
If this device still continues to be this locked up, I might just have to sell mine when the GN2 comes out.
Click to expand...
Click to collapse
probably the bootloader, looks for a simple command,file....its not there,so its stuck in a loop
confuz said:
I have tried recovering with CWM, and restoring to factory settings.
Both didn't work.
Click to expand...
Click to collapse
First declare your bootloader. Have you ever been on a jb-rom, stock or otherwise?
Looking at git for cm it appears the kernel is 2.6, so I would expect that is not a jb rom.
cwm has some issues on this unit.
get into cwm and use fastboot to flash twrp for the proper bootloader you have.
or get into fastboot by use of power and volume down
at that point you can twrp a rom into place; probably not to restore your backup as twrp and cwm have issues reading each others backups.
Good Luck!
Note: If you can power up and access recovery (cwm in your case) you are not bricked and should be able to recover. I have as well as many others. Take your time and go a step at a time! Make back ups and make sure you have fastboot and adb access to your unit! If you are still ics bootloader consider nvflash once you have this mess sorted.
k4killer said:
I am having the same issue installing any ASOP roms on my tf300t.
I have the TWRP recovery, gained root by flashing.
I can install ASUS based roms like CleanROM fine, but I cannot flash any ASOP roms like CM10.
Just curious on what is preventing us from doing this. Especially when our devices are supposedly "unlocked" with custom recoveries and root.
If this device still continues to be this locked up, I might just have to sell mine when the GN2 comes out.
Click to expand...
Click to collapse
This is a known problem... once u get the OTA asus jb update, u can no longer flash any aokp or cyanogen jb roms. This is due to the kernel in these roms which are based on ics but since uve installed new ota jb bootloader it will not work and get stuck on boot screen. Restore in recovery will not work either. U need to download latest asus firmware and flash it then fastboot a recovery (i recommend twrp) and reroot.
Dfanzz said:
This is a known problem... once u get the OTA asus jb update, u can no longer flash any aokp or cyanogen jb roms. This is due to the kernel in these roms which are based on ics but since uve installed new ota jb bootloader it will not work and get stuck on boot screen. Restore in recovery will not work either. U need to download latest asus firmware and flash it then fastboot a recovery (i recommend twrp) and reroot.
Click to expand...
Click to collapse
Ah, ok. I have the JB OTA update so i have the latest bootloader :/
I restored my nandroid of stock and it worked fine.
Just flashed CleanROM which is running great. Cant wait till the CM team gets the JB bootloader worked out as i have always loved being ASOP. Any info on when it might happen?
k4killer said:
Ah, ok. I have the JB OTA update so i have the latest bootloader :/
I restored my nandroid of stock and it worked fine.
Just flashed CleanROM which is running great. Cant wait till the CM team gets the JB bootloader worked out as i have always loved being ASOP. Any info on when it might happen?
Click to expand...
Click to collapse
Great that ur nandroid worked! I know they r working on it... dont really have a time frame... just be on the lookout
Hi,
On my TF300T I flashed the CWM 5.5.0.4 using fastboot and installed CM 9.1 with the CWM - boots & works fine
I want to install CM10 or 10.1 (using the steps I found in the CM Wiki) but the TF300T always stops on "The Device is unlocked".
Now I found a new CWM (6.0.2.3, recovery-jb.img) for using with JB here at xda-developers - finally to install CM10 or 10.1.
But after flashing the recovery-jb.img with fastboot I want to boot into recovery mode, but the TF300T stops on "booting recovery kernel image".
A boot into the previous installed CM9.1 is still possible.
How can I upgrade to CM10 or CM10.1?
Thank you for any help!
cyaneo said:
Hi,
On my TF300T I flashed the CWM 5.5.0.4 using fastboot and installed CM 9.1 with the CWM - boots & works fine
I want to install CM10 or 10.1 (using the steps I found in the CM Wiki) but the TF300T always stops on "The Device is unlocked".
Now I found a new CWM (6.0.2.3, recovery-jb.img) for using with JB here at xda-developers - finally to install CM10 or 10.1.
But after flashing the recovery-jb.img with fastboot I want to boot into recovery mode, but the TF300T stops on "booting recovery kernel image".
A boot into the previous installed CM9.1 is still possible.
How can I upgrade to CM10 or CM10.1?
Thank you for any help!
Click to expand...
Click to collapse
What is your bootloader version? Si it fresh enough?
Bootloader...(!)
I was using ww_epad-9.4.3.30-20120604 - so I upgraded to stock ww_epad-user-10.4.2.20 (using CWM 5.5.0.4), after this I flas the recovery-jb.img (6.0.2.3) - now I can boot into CWM 6.0.2.3 recovery and install CM10. :laugh:
Thank you!
cyaneo said:
Bootloader...(!)
I was using ww_epad-9.4.3.30-20120604 - so I upgraded to stock ww_epad-user-10.4.2.20 (using CWM 5.5.0.4), after this I flas the recovery-jb.img (6.0.2.3) - now I can boot into CWM 6.0.2.3 recovery and install CM10. :laugh:
Thank you!
Click to expand...
Click to collapse
Yeap,.. Bloody bootloader
No problem
Sorry for reopening but - I's crazy!
Heres what I've tried (using Bootloader 1.00e (ww_epad-10.4.2.20-20121226 A03):
First flashing cm 6.0.2.3 and install cm10 and also tried the cm10.1 nightly. Installation works without errors, but on reboot the tf300 freeze on "the device is unlocked"
So I try it with twrp (2.4 jb). The installation of cm10 and also cm10.1 failed with the error "assert failed: getprop"
I also cannot mount /data, no matter what I try.
I've wiped data, cache and dalvik cache every time before I try to install one of the ROMs.
At this time I can do nothing with my TF300, only boot to cwm or twrp!
What the heck is wrong?
cyaneo said:
Sorry for reopening but - I's crazy!
Heres what I've tried (using Bootloader 1.00e (ww_epad-10.4.2.20-20121226 A03):
First flashing cm 6.0.2.3 and install cm10 and also tried the cm10.1 nightly. Installation works without errors, but on reboot the tf300 freeze on "the device is unlocked"
So I try it with twrp (2.4 jb). The installation of cm10 and also cm10.1 failed with the error "assert failed: getprop"
I also cannot mount /data, no matter what I try.
I've wiped data, cache and dalvik cache every time before I try to install one of the ROMs.
At this time I can do nothing with my TF300, only boot to cwm or twrp!
What the heck is wrong?
Click to expand...
Click to collapse
But U probably haven't format /system, right? It's another mandatory thing to do when switching roms.
If it fails, using fastboot try to flash system with original blob file (get it from archive of latest official release) - it will fix /data problem - been there, done that
U can also try to install official rom from zip... IF it fails, try fastboot method.
Let system boot, reboot into recovery again and do full wipe with /system format and install newest cm10.1
szulco said:
But U probably haven't format /system, right? It's another mandatory thing to do when switching roms.
If it fails, using fastboot try to flash system with original blob file (get it from archive of latest official release) - it will fix /data problem - been there, done that
U can also try to install official rom from zip... IF it fails, try fastboot method.
Let system boot, reboot into recovery again and do full wipe with /system format and install newest cm10.1
Click to expand...
Click to collapse
- now I formatted data and system and also wiped all possible parts
- flashing cwm 6.0.2.3 and installing asus stock ROM (ww_epad-user-10.4.2.20), reboot
- cannot access cwm recovery, so I reeflash it with fastboot method
- access cwm recovery and install latest 10.1 nightly, reboot, done.
Thank you so much!
I'm having the same issue.
I bought my TF300T when if first came out. I finally decided to play around with it.
I unlocked it with the Google Play app.
Used fastboot to push the latest ASUS JB4.2 firmware (US_V10.6.1.8)
My bootloader says: (1.00 e) released by "US_epad-10.6.1.8-20130225" A03
I rooted and installed TWRP v2.4.4.0
Everything is working fine for me and I have taken a solid backup, so I'm able to restore back to that when things fail.
I loved using CM7 on my phone, so I wanted to try CM10 on my tablet.
I have tried installing the stable CM 10.0, and I've tried all of the CM 10.1 Nightlies.
Every single time, the install goes perfectly fine, but when I reboot I just get the plain white Asus screen and then it freezes.
I have tried installing with and without installing the gapps.
Every time I install I do a Factory Reset, wipe the Cache, Dalvik Cache, and System. The only thing I didn't do is wipe Data as I'd prefer not to lose my files. (is that the problem, is the data-wipe required?)
Is there something obvious that I'm missing or a step I left out?
Any help would be greatly appreciated.
I tried doing it again with wiping all my data too...that didn't make a difference either. Still freezes on the white asus screen.
Hi, I just registered to reply, as seems noone did. And Ive been there myself, also with the 10.6.1.8 bootloader. Thats the issue. Cyanogenmod isnt compatible yet with the newest bootloader 10.6.1.8.
I hope it will in the future, Im awaiting it too. Until then I just rooted the stock rom, and using it that way. You could try the CROMI-X rom, but its also stock based, I havent tried it yet, maybe ill give the newest update a try (4.3) which will be available in a couple of days, as I really love their newest boot animation(wich I believe isnt included in the 4.2 version)
Till then, no Cyanogenmod for us with the newest bootloader.....also downgrading is not worth the risk if you ask me,,, even if its possible. So Ill wait for the Cyanogenmod team to update their version to ours.
Advice: dont mess with the bootloader nor the recovery img files. Always read carefully if you wanna change recovery if its compatible with your bootloader. If its not, and you flash it...tada....youre the owner of a cool and expensive brick. Dont wipe data in the bootloader, cuz as I understood reading posts here at xda, it will wipe your entire device, including bootloader...then your kinda screwed. So stick to what you have and let the devs do their work to update their roms for the 10.6.1.8 bootloader...MOST importantly, DONT store your device with the keyboard dock closed...(like a laptop)...your screen will crack eventually.I gathered this info on youtube as well as here, and Ive a friend, who was using the device with the dock till last month like that, had it from last august...result, screen cracked 3 weeks ago...its a design flaw in the transformers, the screen is under heavy pressure while in the keydock..I just got my dock last week,, Im storing it separately, and I never close it, only use it for typing, battery and usb.
im writing all this as I think I wont find this post again to reply if you read it.
A while ago i rooted my phone and put a custom rom on it, liked it the got sick of it then flashed back to stock . a day or two later i instantly regretted this decision so i reverted back. This was a very drawn out process because my phone was being dumb etc, i initially tried to flash TWRP on it which worked , but it never flashed roms correctly for me , so i flashed CWM on it and that worked. flashed a rom , and it worked. I now want to flash a new rom but when i boot to recovery , TWRP is still there but when i am in Rom manager, it says CWM 6.0.3.1 is installed.
Is there a way to use odin to flash this back to stock and just flash CWM on the so i can get on with my life and flash new roms?
TL;DR
there are 2 recoveries (TWRP and CWM)
TWRP is accessible but doesn't work
need access to CWM
is there odin or a type of software i can use to solve this ?
I know i ****ed up pretty good, any help would be greatly appreciated!
Download GooManager from the Playstore. Then from GooManager run OpenRecoveryScript which will flash the latest TWRP.
elbee222 said:
Download GooManager from the Playstore. Then from GooManager run OpenRecoveryScript which will flash the latest TWRP.[/QUOTE
can i flash CWN instead?
Click to expand...
Click to collapse
I'm pretty sure that GooManager will install only TWRP. I would start there to fix your problem, since GooManager will install the recovery easily. Once you have TWRP you can switch by installing CWM if you'd like. For that, see http://forum.xda-developers.com/showthread.php?t=2305721
Hi
At the weekend I tried to update my TF300T from CM10.1 to CM10.2. That didn't work as I ended up in a boot loop. Then I thought, maybe I need to flash the latest system blob.
So I did that, only to find that I then couldn't install anything from zip or sd card as the recovery would not mount anything at all. Still got fastboot, so I've tried TWRP 2.6. TWRP 2.5, TWRP 2.4 and CWM, none of them will mount anything at all.
So I find myself with stock ROM, but no way of rooting or installing any custom ROMs.
I'm sure I've made a bloop somewhere, so all suggestions to resolve welcome!
Thanks
Rob
What is your bootloader? Sometimes, if you reflash the same recovery, it *may* work properly the second time around.
I am using TWRP 2.6 with my 127.5 bootloader, just for your knowledge.
aarsyl said:
What is your bootloader? Sometimes, if you reflash the same recovery, it *may* work properly the second time around.
I am using TWRP 2.6 with my 127.5 bootloader, just for your knowledge.
Click to expand...
Click to collapse
That was the tip I needed - I knew I had the right bootloader but I had downloaded the wrong TWRP (I had flashed the JB version instead of the 4.3 version). Doh!
Now flashed CM10.2 and is running Android 4.3. CPU-Z tells me I'm rooted though at the moment I can't get any root apps to work with SuperSU. I'll leave that for another day!
Rob
I have the Nvidia Shield 16 Gig Wifi tablet and Ive only had it for about 2 months. I wanted to unroot and completely go back to out of the box settings. I flashed the stock recovery, and boot. When i flash system.img it says insufficient space. Im really freaking out over this. I now have CWM running as recovery, but im stuck in a bootloop/softbrick. Ive had this with other tablets before but it was fixable, Im stumped with this one. I really need help here. Please and thank you for help, I need it ASAP.
ProSniper54 said:
I have the Nvidia Shield 16 Gig Wifi tablet and Ive only had it for about 2 months. I wanted to unroot and completely go back to out of the box settings. I flashed the stock recovery, and boot. When i flash system.img it says insufficient space. Im really freaking out over this. I now have CWM running as recovery, but im stuck in a bootloop/softbrick. Ive had this with other tablets before but it was fixable, Im stumped with this one. I really need help here. Please and thank you for help, I need it ASAP.
Click to expand...
Click to collapse
So, basically you left your shield tablet without a rom installed? If you have CWM recovery, you could flash a Full OTA found here http://forum.xda-developers.com/shi...k-recovery-images-ota-library-guides-t2988881
It happened to me to. So I downloaded a Philz built in Jan (I googled it)**** and I flashed the full 2.1 ota.
You could flash the TWRP 2.8.5.0 found here:http://forum.xda-developers.com/showpost.php?p=58864006&postcount=90 and then flash the full ota.
Then, Im thinking, you could flash stock recovery. I'd recommend flashing TWRP though, I had a problem with CWM and I could not flash full 2.1 OTA with it.
PS: Did you try wiping system from CWM and then flashing system with fastboot?
****EDIT: I found the Philz I used: https://goo.im/devs/playground/shieldtablet/Philz_Touch-01-02-2015_14.18-TN8-WiFi.zip
but Ive moved forward to TWRP since I couldn't make nandroid backups with it.
NaminatoR1254jaime.sier said:
So, basically you left your shield tablet without a rom installed? If you have CWM recovery, you could flash a Full OTA found here http://forum.xda-developers.com/shi...k-recovery-images-ota-library-guides-t2988881
It happened to me to. So I downloaded a Philz built in Jan (I googled it)**** and I flashed the full 2.1 ota.
You could flash the TWRP 2.8.5.0 found here:http://forum.xda-developers.com/showpost.php?p=58864006&postcount=90 and then flash the full ota.
Then, Im thinking, you could flash stock recovery. I'd recommend flashing TWRP though, I had a problem with CWM and I could not flash full 2.1 OTA with it.
PS: Did you try wiping system from CWM and then flashing system with fastboot?
****EDIT: I found the Philz I used: https://goo.im/devs/playground/shieldtablet/Philz_Touch-01-02-2015_14.18-TN8-WiFi.zip
but Ive moved forward to TWRP since I couldn't make nandroid backups with it.
Click to expand...
Click to collapse
Okay I have to thank you a ton for getting my tablet working again. Only problem now, I cant system update anymore, I get an android guy with a red warning sign in him. Any suggestions?
ProSniper54 said:
Okay I have to thank you a ton for getting my tablet working again. Only problem now, I cant system update anymore, I get an android guy with a red warning sign in him. Any suggestions?
Click to expand...
Click to collapse
Probably because you have custom recovery still or you are rooted.
The android red guy happens bc you are rooted (it'll happen even if you have stock recovery).
To system update, you have to be without custom recovery AND unrooted.
EDIT: Im theoretically speaking. I am rooted, therefore, I dont update via OTA.
i tried to recover to factory but i am stuck at system.img which dun seem to be copying into my tablet i manage to flash twrp in and wat else can i do to make it working again?
thanks