Database Info

[GT-P6210] Official ICS Brazil 4.0.4 firmware [STOCK/UNROOTED]

This Rom is the Brazilian version released yesterday by the ICS for samsung p-6210
http://www.hotfile.com/dl/172759204/f65ee88/P6210UBLP6_P6210ZTOLP2_ZTO.zip.html
Odin : http://www.4shared.com/rar/ShRHf_QA/Odin3v185.html
Note: The firmware should not under any circumstances be used in the P6200 3G + Wifi model, the same model is unique
******** P6210 Wifi.
Any procedure takes your risk, I are not responsible for any damage or even loss of the device, leaving all responsibility borne by the owner of the appliance.

is the wifi issue fixed

dj_m said:
is the wifi issue fixed
Click to expand...
Click to collapse
No. I tested here in my Brazilian model, and no.
WiFi is very unstable.
And, being a WiFi-only tablet, this is a deal breaker.
Damn... no CM9, CM10, official firmware... I just can't upgrade from HoneyComb :crying:

I am didn't have any problem with wifi and this firmware.
Sent from my GT-P6210 using xda app-developers app

leo_br1 said:
I am didn't have any problem with wifi and this firmware.
Sent from my GT-P6210 using xda app-developers app
Click to expand...
Click to collapse
The main problem is with hidden SSIDs. It's unstable and sometimes connect, sometimes don't
I had to reconfigure my router to get it working.
In Android 3.2 the problem didn't exist.
Samsung's fault. CM9 and CM10 ports have the same problem because of that.

Strange, on my Tablet was alright

Wifi not working...

Hello!
I decided recently to get a custom rom and since I've before used CM, I chose to use it yet again.
Though, I have problems with the Wifi. It's not working at all, it finds the networks though it just tries to connect and then fails.
I've tried the different kernels and searched through the forums for any solutions for it and I've tried what I've found, though nothing has worked so far..
So is there anyone that has had similar problem that has a solution for it?
I'm currently using,
[ALPHA][ROM][4.1.2] CyanogenMod 10 for Samsung Galaxy SL - Alpha 4 - Farewell Release
[UPDATE_4][9th Feb][KERNEL][CM9/CM10][ICS/JB] ALPHA11 Kernel
Thanks.

Maybe you enter wrong password? If not, flash XXKPE+PIT without bootloader

Rich'Dawg' said:
Maybe you enter wrong password? If not, flash XXKPE+PIT without bootloader
Click to expand...
Click to collapse
No, I'm 100% sure it's not a problem of wrong password.
But thanks a lot for responding and coming with an advice!
I'll try that now then!

banarne123 said:
Hello!
I decided recently to get a custom rom and since I've before used CM, I chose to use it yet again.
Though, I have problems with the Wifi. It's not working at all, it finds the networks though it just tries to connect and then fails.
I've tried the different kernels and searched through the forums for any solutions for it and I've tried what I've found, though nothing has worked so far..
So is there anyone that has had similar problem that has a solution for it?
I'm currently using,
[ALPHA][ROM][4.1.2] CyanogenMod 10 for Samsung Galaxy SL - Alpha 4 - Farewell Release
[UPDATE_4][9th Feb][KERNEL][CM9/CM10][ICS/JB] ALPHA11 Kernel
Thanks.
Click to expand...
Click to collapse
try doing clean xxkpe flash with pit file....then ddlf2..then bam v14 kernel...try if it works..

banarne123 said:
Hello!
I decided recently to get a custom rom and since I've before used CM, I chose to use it yet again.
Though, I have problems with the Wifi. It's not working at all, it finds the networks though it just tries to connect and then fails.
I've tried the different kernels and searched through the forums for any solutions for it and I've tried what I've found, though nothing has worked so far..
So is there anyone that has had similar problem that has a solution for it?
I'm currently using,
[ALPHA][ROM][4.1.2] CyanogenMod 10 for Samsung Galaxy SL - Alpha 4 - Farewell Release
[UPDATE_4][9th Feb][KERNEL][CM9/CM10][ICS/JB] ALPHA11 Kernel
Thanks.
Click to expand...
Click to collapse
master dhiru1602 said at the first it's have wifi problom in alpha 4
use this kernal: forum.xda-developers.com/showthread.php?t=1976023
See this but it's for stock ROM when you Root it:
http://www.youtube.com/watch?feature=player_embedded&v=ee8ve0FAVK4
i have a jallybam no problom with me in wifi

if you install querty kernel without clean you have no wifi on niscptl kernel

banarne123 said:
Though, I have problems with the Wifi. It's not working at all, it finds the networks though it just tries to connect and then fails.
Click to expand...
Click to collapse
Hi,
I also had wifi problems similar to yours until I came across this simple solution.
You may have already tried this, but if not:
In Settings->Wifi->Menu->Advanced, find the option which says "Avoid Poor Connections" and uncheck it. (de-select).
This trick completely solved my wifi problem.
I hope it works for you.

check you phone mac address. if your router is filtering mac turn on. than u will not get connected.
Sent from my Galaxy Nexus using Tapatalk 2

devasenan200 said:
try doing clean xxkpe flash with pit file....then ddlf2..then bam v14 kernel...try if it works..
Click to expand...
Click to collapse
How do I find out which xxkpe to use if I can't see which firmware version I have by typing #1234#?
When I type #1234# I just get "Connection problem or invalid MMI code"...

banarne123 said:
How do I find out which xxkpe to use if I can't see which firmware version I have by typing #1234#?
When I type #1234# I just get "Connection problem or invalid MMI code"...
Click to expand...
Click to collapse
Its *#1234# not #1234#!!!
And it would only work on stock rom..
Sent from my GT-I9003 using xda app-developers app

wifi not working
LoLaTiOn said:
if you install querty kernel without clean you have no wifi on niscptl kernel
Click to expand...
Click to collapse
could you explain in more detail how to flash nicsptl update.
which kernel has better battery qwerty or nicsptl update and with what governer ??

I've installed XXKPE and DDFL now and it's all working, almost like normal.
It's just my wireless signal that's a little weaker compared to before.
I have to be quite close to the wireless router to get decent signal otherwise I get almost none at all.
Is there any kernel or something I can do to fix this?

[Q] Jelly Bean 4.1.2 upgrade; wifi tether is gone

Hello there,
Can anybody restore my lost wifi tethering function? I have a Samsung Galaxy SII Skyrocket on the ATT network (i727). I recently upgraded through Kies to the new Jelly Bean 4.1.2 from GB and lost my root. I rerooted with twrp 2.5.0.0. in odin and all went well. I then went to check on my wifi tether for root users app and it was a no-go. I have spent considerable time researching and have not been able to find any solutions. I updated the app to the most current, tried a hundred different configs in the settings. I have tried the Treve Mod for this app and have been able to create a connection, but no data flows. I would be very grateful if someone could enlighten me as to how achieve a working system. Sincere thanks.

Pay for it or don't use stock suckwiz.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

xcrazydx said:
Pay for it or don't use stock suckwiz.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
Thanks!!........Appreciate your constructive input. Is this when I press the "thanks"?

kman_550 said:
hello there,
can anybody restore my lost wifi tethering function? I have a samsung galaxy sii skyrocket on the att network (i727). I recently upgraded through kies to the new jelly bean 4.1.2 from gb and lost my root. I rerooted with twrp 2.5.0.0. In odin and all went well. I then went to check on my wifi tether for root users app and it was a no-go. I have spent considerable time researching and have not been able to find any solutions. I updated the app to the most current, tried a hundred different configs in the settings. I have tried the treve mod for this app and have been able to create a connection, but no data flows. I would be very grateful if someone could enlighten me as to how achieve a working system. Sincere thanks.
Click to expand...
Click to collapse
you must to root your phone, and use any mod for umc1 roms... Check the threads for rom... There have mod for thats... Sorry for my poor english hehehehehehe...

Use fresh n slim rom in the development thread it is JB with some small modifications, including wifi tethering enabled.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app

I'm having the same issue. I upgraded to JB Deodexed, the phone is rooted, and I have Wifi Tether v3.3-pre2 installed. I've tried some of the different profiles, S2, SL, S3, Auto, and some launch with errors, while the ones that don't launch with errors turn on my WiFi and my phone connects to my router. I've been able to find some threads where people are getting it to work on the S3, but has anyone had luck with a Skyrocket?

I am having the same problem. I have tried a number of custom 4.2.2 roms, and almost 4 different versions of Wifi tether from 3.1 to v3.3 using every possible combination of settings to get wifi to work. So far, i am still out of luck. Has anyone been able to get a stable custom rom and wifi tethering to work on their phone yet for a rooted phone? How?

Ya no luck with me either
Sent from my SAMSUNG-SGH-I727 using xda app-developers app

HolyPhyre said:
I am having the same problem. I have tried a number of custom 4.2.2 roms, and almost 4 different versions of Wifi tether from 3.1 to v3.3 using every possible combination of settings to get wifi to work. So far, i am still out of luck. Has anyone been able to get a stable custom rom and wifi tethering to work on their phone yet for a rooted phone? How?
Click to expand...
Click to collapse
I thought I had it working with CM10.1. I think I just used Tethering from the Settings, not needing to install any add on app to accomplish WiFi Tethering. That being said, CM10.1 battery life and other little quirks and bugs sent me right back to the Stock Rom.

purdone said:
I thought I had it working with CM10.1. I think I just used Tethering from the Settings, not needing to install any add on app to accomplish WiFi Tethering. That being said, CM10.1 battery life and other little quirks and bugs sent me right back to the Stock Rom.
Click to expand...
Click to collapse
Did the wifitethering work with the stock ROM you fell back on? What version was your stock ROM?

HolyPhyre said:
Did the wifitethering work with the stock ROM you fell back on? What version was your stock ROM?
Click to expand...
Click to collapse
I went from Stock ICS (rooted, and WiFi Tether App worked) to CM10.1 (I believe I used CM's WiFi hotspot settings, or possibly WiFi Tether). I then went to the Deodexed Stock JB and rooted, and I can't get any WiFi tethering to work. I'm tempted to go back to Stock ICS.
---------- Post added at 02:28 PM ---------- Previous post was at 02:18 PM ----------
I just installed Easy WiFi Tethering by BigWhitePlanet and it appears to be working. However, it is installing a bunch of junk, like Candy Crush Saga and is full of other ads and programs that seem to be installing themselves at their own will.

purdone said:
I went from Stock ICS (rooted, and WiFi Tether App worked) to CM10.1 (I believe I used CM's WiFi hotspot settings, or possibly WiFi Tether). I then went to the Deodexed Stock JB and rooted, and I can't get any WiFi tethering to work. I'm tempted to go back to Stock ICS.
---------- Post added at 02:28 PM ---------- Previous post was at 02:18 PM ----------
I just installed Easy WiFi Tethering by BigWhitePlanet and it appears to be working. However, it is installing a bunch of junk, like Candy Crush Saga and is full of other ads and programs that seem to be installing themselves at their own will.
Click to expand...
Click to collapse
I was able to get it to work using the stock JB 4.1.2 upgrade. I used Wifi Tethering for Root. I too tried every combination and was so frustrated. I found the TrevE Mod version of Wifi Tethering and it works great!! The "trick" is to COMPLETELY delete any previous versions of Wifi Tether for Root before installing the TrevE Mod version. I'm to new to this forum and can't post any links here but just search this forum for TrevE Mod and you will find any entire thread complete with instructions. Works awesome!! Don't forget to give him some thanks and a little dough doesn't hurt either. Good luck

purdone said:
I went from Stock ICS (rooted, and WiFi Tether App worked) to CM10.1 (I believe I used CM's WiFi hotspot settings, or possibly WiFi Tether). I then went to the Deodexed Stock JB and rooted, and I can't get any WiFi tethering to work. I'm tempted to go back to Stock ICS.
---------- Post added at 02:28 PM ---------- Previous post was at 02:18 PM ----------
I just installed Easy WiFi Tethering by BigWhitePlanet and it appears to be working. However, it is installing a bunch of junk, like Candy Crush Saga and is full of other ads and programs that seem to be installing themselves at their own will.
Click to expand...
Click to collapse
Did you try the TrevE Mod?
here is a link
http://forum.xda-developers.com/showthread.php?t=2256483

kman_550 said:
Did you try the TrevE Mod?
here is a link
http://forum.xda-developers.com/showthread.php?t=2256483
Click to expand...
Click to collapse
Thank you! Searching wasn't working the other day. This apk and the included instructions in the thread got me up and running. Encryption even works.
Thanks again!

After changing from a stock rom I can not get wifi tether to work
Hello, I need some help please. I have just installed the slim bean rom on my samsung s3 from sprint. I have used wifi tether for years prior to this i only had one problem prior to when i changed phones. But i managed to get it working. But now i can not get it to work. I have went to the newest version to the 2.1, I can get to where it loads with no errors but it does not broadcast, I have tried installing different scripts, to see if it will work in the background but still no luck. I have read all the android websites with issues and i have tried every setting that has worked for others and i still can not get it to work. Any suggestions would be appreciated:confused

Uh wrong section this is the s2 skyrocket not the d2spr
Sent from my SAMSUNG-SGH-I727 using Tapatalk

sorry
Sorry
TheCybertronian said:
Uh wrong section this is the s2 skyrocket not the d2spr
Sent from my SAMSUNG-SGH-I727 using Tapatalk
Click to expand...
Click to collapse

N8013 USB devices issue on KitKat leak

Hi everyone,
Recently, I've installed the leaked kitkat rom on my N8013. Everything seems to work fine, except for USB Devices. When I plug in my USB mouse, it says it's connected and then disconnected. Even if I pull out the USB, the message will continue to go on and off until I reboot my device. Another USB device that is having issue is my USB game controller. It doesn't display the message, however sometimes in game the button will get "stuck" (where my device thinks i'm still holding down the button) even though I have released the button. If anyone could help, I would greatly appreciate it.

just flash the official KitKat

d4rkkn16ht said:
just flash the official KitKat
Click to expand...
Click to collapse
The official N8010 and N8013 was released?

N8000, but, CMIIW, it's mostly the same except you'll have No Radio icon if your version is WiFi only

d4rkkn16ht said:
just flash the official KitKat
Click to expand...
Click to collapse
Will this actually fix my problem?

link6155 said:
Will this actually fix my problem?
Click to expand...
Click to collapse
I don't know as I haven't flash it.
I'm waiting a custom version of the official by Mike (ARHD chef).
Official version usually has less bugs...just give it a try if you want to.
But remember, always read carefully before flashing as it is for N8000 & yours is N8013

d4rkkn16ht said:
I don't know as I haven't flash it.
I'm waiting a custom version of the official by Mike (ARHD chef).
Official version usually has less bugs...just give it a try if you want to.
But remember, always read carefully before flashing as it is for N8000 & yours is N8013
Click to expand...
Click to collapse
So I can just flash the rom just like that?
---------- Post added at 09:50 AM ---------- Previous post was at 09:49 AM ----------
d4rkkn16ht said:
I don't know as I haven't flash it.
I'm waiting a custom version of the official by Mike (ARHD chef).
Official version usually has less bugs...just give it a try if you want to.
But remember, always read carefully before flashing as it is for N8000 & yours is N8013
Click to expand...
Click to collapse
So I can just flash the rom just like that if I have a N8013?

jdgreat4 said:
So I can just flash the rom just like that?
---------- Post added at 09:50 AM ---------- Previous post was at 09:49 AM ----------
So I can just flash the rom just like that if I have a N8013?
Click to expand...
Click to collapse
read everything before trying!
I'm not responsible if you don't read everything.
Ask if you have any questions about it in this forum, not to me as I never flash KitKat before.

d4rkkn16ht said:
read everything before trying!
I'm not responsible if you don't read everything.
Ask if you have any questions about it in this forum, not to me as I never flash KitKat before.
Click to expand...
Click to collapse
I flashed it did a full wipe before flashing and it runs like a beast. Way better than the 4.1.2 rom.

I just flashed the official KitKat build and the problem unfortunately still persists. Perhaps it's caused by the fact that the update was intended for the N8000 and not the N8013. Could anyone try to plug in a mouse and see if they also get this problem?

link6155 said:
I just flashed the official KitKat build and the problem unfortunately still persists. Perhaps it's caused by the fact that the update was intended for the N8000 and not the N8013. Could anyone try to plug in a mouse and see if they also get this problem?
Click to expand...
Click to collapse
Yes. I can confirm the mouse problem. It keeps saying connected, disconnected. Guess those bugs will be sorted one we get an official n8013 build, if we get one.
Or you can ask the devs for a fix.
Sent from my HTC One using XDA Premium 4 mobile app

jdgreat4 said:
Yes. I can confirm the mouse problem. It keeps saying connected, disconnected. Guess those bugs will be sorted one we get an official n8013 build, if we get one.
Or you can ask the devs for a fix.
Sent from my HTC One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I'm glad that I'm not the only one with this problem. Could someone with an N8000 test to see if they have this problem? If so, that means it's a problem across all devices and not just the N8013.

I too have this issue and am extremely curious if this ever got sorted out? i love my note 10.1 and the keyboard dock all i need is the damn mouse to work......

It's a matter of supplying enough power. If your kernel is not meant to support this kind of power than it won't work at all. Devices that needs external power (2.5 inch hard-drives, mouse connectors etc.) will work if you flash another kernel like boeffla. I had the same issue as you and I installed boeffla kernel. It works like a charm
I hope this will help you and if you want more help just mention me in your comment or send me a p.m. Have a nice day!

Kit Kat 10.1

Well we still have no kk for the tab 3 10.1. This is the last Samsung tablet that I will buy. Can't get kk can't get a custom rom this is bull. Next will be a nexus we got screwed on this one will not happen again.

jason504 said:
Well we still have no kk for the tab 3 10.1. This is the last Samsung tablet that I will buy. Can't get kk can't get a custom rom this is bull. Next will be a nexus we got screwed on this one will not happen again.
Click to expand...
Click to collapse
Read the forums/threads.
m

jason504 said:
Well we still have no kk for the tab 3 10.1. This is the last Samsung tablet that I will buy. Can't get kk can't get a custom rom this is bull. Next will be a nexus we got screwed on this one will not happen again.
Click to expand...
Click to collapse
Kitkat is already released for tab 3 10.1 . See in the android development section . You will find everything there .
Don't forget to press the thanks button !!!!!!
Sent from my GT-N7100 using XDA Premium 4 mobile app

Kk from Samsung is not out for tab 3 10.1 wifi

It was released for the non wifi ones. I have already looked in development they got nothing but a couple of stock roms that are no good. I have tried them. I am talking about roms like cm based roms. They have nothing

moonbutt74 said:
Read the forums/threads.
m
Click to expand...
Click to collapse
I know how to read I have been flashing roms for 4 years.

ummmmm..... i have kk on my P5210(wifi-variant)
the release is for the canadian variant but it works fine. you should really look in the 10.1 development thread. should be top of the list....
---------- Post added at 03:04 PM ---------- Previous post was at 03:03 PM ----------
here is the link to the thread...
http://forum.xda-developers.com/gal...om-100-stock-4-4-2-kitkat-p5210-wifi-t2848279

jason504 said:
i know how to read i have been flashing roms for 4 years.
Click to expand...
Click to collapse
Read the forums/threads,
m

jason504 said:
Kk from Samsung is not out for tab 3 10.1 wifi
Click to expand...
Click to collapse
Hahhahahahah.......very funny..Bro, go to sammobile.com and go to firmware section & type P5210 and you will see that Canada has recieved kitkat . Download firmware(1.3gb) and flash via odin. And about cm , cm11 4.4.4 is released . But It has some bugs and it cannot be used as a daily driver atleast for now!!!!!!!
Sent from my GT-P5210 using XDA Premium 4 mobile app

Never mind completely over ya head. Thanks I know you all where trying to be helpful. But I was talking about kk that Samsung sends to my device not a Canadian version. I have had this for a year and there is not one stable rom. I want the kk that belongs on the tablet. Like I said nexus next time. I guess the wifi American one will be the last one. Lol

I am happy to see kk geting close. And even happier to have a group of friends that are giving 200% time to provide us what Samsung/Intel should have.
Never the less It is true Samsung and [email protected]#$%Ing Intel garbage had screw us all by no releasing a full Open Source than can be use to create CianogenMod or aosp. To make it worst Googles and Samsung new policies while implementing new updates is geting to a untolerated limit!
I too think this is the last device I purchase without first waiting for others report. Samsung lost my thrust.

I can't really see your point. As you know,the stock roms are bloated,slow and sometimes more unstable than the modded ones. As for the release for Kit Kat - Samsung seems to not really care for it's older devices,seeing how many more tabs they produced. Kinda strange to go out with a new version with the product every next year. To be honest, I think they should at least expand the lifespan of these tablets, It's not like they are really cheap or something. As for the hardware part of things,I think you should know that the 10.1 version is actually really different compared to the other two Galaxy Tab 3s, thus either making the release process slower since there are newer models on which they focus more. We should all be thankful that there are ambitious developers here and I'd even like to thank all of them for their hard work. For now - you should stick and help for the development rather than just wait. I hope I don't sound insulting or anything. I think that any help (bug reports,etc) would be appreciated.

jason504 said:
Never mind completely over ya head. Thanks I know you all where trying to be helpful. But I was talking about kk that Samsung sends to my device not a Canadian version. I have had this for a year and there is not one stable rom. I want the kk that belongs on the tablet. Like I said nexus next time. I guess the wifi American one will be the last one. Lol
Click to expand...
Click to collapse
Oh bro I am also talking about that only . See, there are different regions of every tablet. You must not be living in Canada. This tab has got 4.4 kk but In canada & not In your country. So , you will not be able to download kk by going to software update . You will have to download it from sammobile & flash it manually via odin . Please ubderstand this. I and a lot of other people are running Kitkat .
Sent from my GT-P5210 using XDA Premium 4 mobile app

And additionally it is a very easy process to install the Canada version with Odin.
I am from Germany, have installed the Rom and so far no problems.
But for my opinion not a lot of differences to the former Rom.
Gesendet von meinem K00F mit Tapatalk

on versions
@jason504
i believe any version will contain the same language support set, also version specificity only comes into play
with respect to cellular/gsm variants. for wifi only models it really doesn't matter. else there are still "after market"
methods for sorting out issues.
m

correct me if I'm wrong
Aeyan Ashraf said:
Hahhahahahah.......very funny..Bro, go to sammobile.com and go to firmware section & type P5210 and you will see that Canada has recieved kitkat . Download firmware(1.3gb) and flash via odin. And about cm , cm11 4.4.4 is released . But It has some bugs and it cannot be used as a daily driver atleast for now!!!!!!!
Sent from my GT-P5210 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I do not see option to use ART instead of Dalvik
Do you know if thet's possible for the GT-P5210? or any possible workaround to do this?
Thanks!

alvio said:
I do not see option to use ART instead of Dalvik
Do you know if thet's possible for the GT-P5210? or any possible workaround to do this?
Thanks!
Click to expand...
Click to collapse
i don't believe it exist as an option on the touchwiz rom, however on the cm11 test it is very crashy.
m

takerstone said:
I can't really see your point. As you know,the stock roms are bloated,slow and sometimes more unstable than the modded ones. As for the release for Kit Kat - Samsung seems to not really care for it's older devices,seeing how many more tabs they produced. Kinda strange to go out with a new version with the product every next year. To be honest, I think they should at least expand the lifespan of these tablets, It's not like they are really cheap or something. As for the hardware part of things,I think you should know that the 10.1 version is actually really different compared to the other two Galaxy Tab 3s, thus either making the release process slower since there are newer models on which they focus more. We should all be thankful that there are ambitious developers here and I'd even like to thank all of them for their hard work. For now - you should stick and help for the development rather than just wait. I hope I don't sound insulting or anything. I think that any help (bug reports,etc) would be appreciated.
Click to expand...
Click to collapse
When I got this tablet I thought Yes since I have been flashing roms on my phone for years here is something else I can flash roms on and have fun. Boy I was wrong I know they have a couple of stock roms but they ran worse than my stock rom. So I unrooted and said I will wait for Samsung to update my tablet to kk. I have been waiting and waiting it's just a big let down. But you live and learn my phone is faster than my tablet so basically all I use my tablet for is chrome cast. To be honest with you I don't even know if I will get another tablet for what. It's easier to just grab my phone. That's why I love big phones.

Just curious, I understand going back to stock, but why unroot? How can you stand all that bloatware?
Sent from my Atrix HD using XDA Free mobile app

bmatney said:
Just curious, I understand going back to stock, but why unroot? How can you stand all that bloatware?
Sent from my Atrix HD using XDA Free mobile app
Click to expand...
Click to collapse
B,
some prefer full stock. some prefer rooting and hacking. both are good.
m