While it will say I'm a noob because this is my first post I am not really a noob, I just haven't had a reason to post until now
I flashed a 4.2 ROM and lost all connectivity to the network. Odin'd back to stock and here I sit, with that triangle saying I am roaming still. I have read every forum about this, tried the *2767*3855# a billion times and am getting nothing.
I need ideas! Please help!
Thanks
Verizon Samsung Galaxy S3
EDIT* *2767*3855# doesn't activate anything in the dialer. It is just acting as if I want to make a phone call.
http://forum.xda-developers.com/showthread.php?t=2066275
Rudy_Ruettiger said:
http://forum.xda-developers.com/showthread.php?t=2066275
Click to expand...
Click to collapse
Been through that 1.5 billion times already :crying::crying::crying:
You are on a TW ICS rom I am assuming? That dialer code should work automatically on a TW ICS rom. Maybe try a different ICS build like this one: http://goo.im/devs/invisiblek/i535/stock.vzw_root66.tar or these from droidstyle's guide: http://goo.im/devs/invisiblek/i535/...535VZWALG1_743127_REV09_user_low_ship.tar.zip or http://hotfile.com/dl/182822657/9f6...WBLK3_381038_REV09_user_low_ship.tar.md5.html.
BigErnM said:
You are on a TW ICS rom I am assuming? That dialer code should work automatically on a TW ICS rom. Maybe try a different ICS build like this one:
I'm on a tw 4.1.1 stock via odin
Click to expand...
Click to collapse
You need to get back to a TW ICS based rom 4.0.4. Use one of those links I gave above.
BigErnM said:
You need to get back to a TW ICS based rom 4.0.4. Use one of those links I gave above.
Click to expand...
Click to collapse
I will certainly try it. After I flash in Odin is there any special details after I should try?
Flash the root66 from odin, factory reset, and then use the dialer code. This should work. From there install recovery and proceed as normal.
Important: This will completely wipe the internal storage. Backup first!
sweeds said:
Flash the root66 from odin, factory reset, and then use the dialer code. This should work. From there install recovery and proceed as normal.
Click to expand...
Click to collapse
I couldn't get a .tar file for root66, it just came as a zip, otherwise I was about to try that option as well.
jdclem30 said:
I couldn't get a .tar file for root66, it just came as a zip, otherwise I was about to try that option as well.
Click to expand...
Click to collapse
Unzip it
jdclem30 said:
I couldn't get a .tar file for root66, it just came as a zip, otherwise I was about to try that option as well.
Click to expand...
Click to collapse
its supposed to look like that. i just double checked mine in Odin3.
BigErnM said:
You are on a TW ICS rom I am assuming? That dialer code should work automatically on a TW ICS rom. Maybe try a different ICS build like this one: http://goo.im/devs/invisiblek/i535/stock.vzw_root66.tar or these from droidstyle's guide: http://goo.im/devs/invisiblek/i535/...535VZWALG1_743127_REV09_user_low_ship.tar.zip or http://hotfile.com/dl/182822657/9f6...WBLK3_381038_REV09_user_low_ship.tar.md5.html.
Click to expand...
Click to collapse
First link you game me worked! Thanks a million
Glad I could be of assistance.
Related
I have a stock AT&T samsung Galaxy SII skyrocket and tried to flash to ICS.I followed all procedure described and the phone keep rebooting at the intro screen. I reinstalled few times and still happening. Please help. thanks
atwc76 said:
I have a stock AT&T samsung Galaxy SII skyrocket and tried to flash to ICS.I followed all procedure described and the phone keep rebooting at the intro screen. I reinstalled few times and still happening. Please help. thanks
Click to expand...
Click to collapse
What did you flash from? GB? Or the ICS leak?
My recommendation would be to flash the latest ICS leak and then flash SkyICS as instructed. Worked fine for me.
thanks for advice.. i was flashing from GB and get this problem. But i am able to flash to leak now. Will try to update again. thanks
atwc76 said:
i flashed from GB
Click to expand...
Click to collapse
I would flash the latest ICS leak and then from there, flash SkyICS. Flashing from GB has had it's probems.
http://forum.xda-developers.com/showthread.php?t=1652660 will get you to the latest leak. Have you used Odin before? Gotten into download mode? If not, I'm sure we can help you through it.
atwc76 said:
thanks for advice.. i was flashing from GB and get this problem. But i am able to flash to leak now. Will try to update again. thanks
Click to expand...
Click to collapse
If that doesn't work you should try dl'ing the files again and see if that works...
My phone was running CM7 and I wanted to go back to BML roms but couldn't so I used FB's [ODIN+CWM] GB Ext4 Starter Pack to try to get back to BML from MTD. I got up to step 4 and odin stopped when it got to factorysf. I pulled out the battery and bricked the phone but then put the battery back in and got into download mode.
Now, I tried to flash an odin rom since I can't reboot into anything and I downloaded "[Odin][ROM] Whitehawkx's KC1 with CWM recovery" and tried flashing that but odin message just said "all threads completed" and the phone still doesnt work.
Can anyone please help???
galaxysteve18 said:
My phone was running CM7 and I wanted to go back to BML roms but couldn't so I used FB's [ODIN+CWM] GB Ext4 Starter Pack to try to get back to BML from MTD. I got up to step 4 and odin stopped when it got to factorysf. I pulled out the battery and bricked the phone but then put the battery back in and got into download mode.
Now, I tried to flash an odin rom since I can't reboot into anything and I downloaded "[Odin][ROM] Whitehawkx's KC1 with CWM recovery" and tried flashing that but odin message just said "all threads completed" and the phone still doesnt work.
Can anyone please help???
Click to expand...
Click to collapse
Follow this.
http://forum.xda-developers.com/showpost.php?p=21953878&postcount=2
eollie said:
Follow this.
http://forum.xda-developers.com/showpost.php?p=21953878&postcount=2
Click to expand...
Click to collapse
Thanks so much! but do i follow directions without bootloaders or with bootloaders??
galaxysteve18 said:
Thanks so much! but do i follow directions without bootloaders or with bootloaders??
Click to expand...
Click to collapse
I would go with bootloaders.
galaxysteve18 said:
Thanks so much! but do i follow directions without bootloaders or with bootloaders??
Click to expand...
Click to collapse
Unless you have a T959W, flash bootloaders!
If you do have a T959W, and have flashed bootloaders, pm me your results!
bhundven said:
Unless you have a T959W, flash bootloaders!
If you do have a T959W, and have flashed bootloaders, pm me your results!
Click to expand...
Click to collapse
Nope nevermind it worked im back on GB!! THANKS SO MUCH
How can I return phone to stock without USB working on phone. PC says not recognized. It is rooted and running Jelly Bean 4.1.2 with CWM installed. Galaxy Skyrocket S2. My S3 has no problem connecting with same USB cable so must be something with S2 phone. Thanks,
http://forum.xda-developers.com/showthread.php?t=1764556&highlight=rom
That is stock ICS with UCLF6
This is also supposed to be in Q&A.
immaeetuu said:
http://forum.xda-developers.com/showthread.php?t=1764556&highlight=rom
That is stock ICS with UCLF6
This is also supposed to be in Q&A.
Click to expand...
Click to collapse
Thanks. Just want to return it to STOCK as 4.1.2 uses TOO much battery. I have CWM Touch 6 installed Now. So will give it a try. Hope it does not mess up phone!!!
tailgunner9 said:
Thanks. Just want to return it to STOCK as 4.1.2 uses TOO much battery. I have CWM Touch 6 installed Now. So will give it a try. Hope it does not mess up phone!!!
Click to expand...
Click to collapse
Have the STOCK firmware downloaded from SamMobile. So will this work as Well???
tailgunner9 said:
Have the STOCK firmware downloaded from SamMobile. So will this work as Well???
Click to expand...
Click to collapse
Everything from Sammobile is for Odin.
hechoen said:
Everything from Sammobile is for Odin.
Click to expand...
Click to collapse
Unzipped file ATT-UCLF6-cwm5 and he has 2 files the same system\lib\libdivxdrm.so 194,244 and other 206,568 so which do I use???
tailgunner9 said:
Unzipped file ATT-UCLF6-cwm5 and he has 2 files the same system\lib\libdivxdrm.so 194,244 and other 206,568 so which do I use???
Click to expand...
Click to collapse
Don't unzip it ... Copy the zip to your sd card and flash it in CWM
Those roms are made in Linux which diffrentiaite between small and capital letters..
I've been googling, and can't seem to find the proper files, though hopefully you guys could help.
Im trying to find the Stock Recovery, and Kernel for the Wifi US 8013 4.1.2 UCMA3 version of the note.
I've been trying Triangle away, didn't work, and i tried the whole OTA update, but says my tablet is modified and cannot continue.
I just hate it rooted, though would like the rest of the two files that i've mentioned stock.
Can anyone help me find the links and proper installation for this files, unless is Odin - PDA and remove teh F.ResetTime option and just have Reboot checked?
Thank you!
Usual source for firmware is sammobile.com.
jje
JJEgan said:
Usual source for firmware is sammobile.com.
jje
Click to expand...
Click to collapse
The firmware i know where to find, but i can't seem to locate the kernels and recovery for it :/
Kikoshi said:
The firmware i know where to find, but i can't seem to locate the kernels and recovery for it :/
Click to expand...
Click to collapse
Flash it and backup/extract the recovery/kernel? If you want them seperate from the rom..
All necessary images are in the official roms.
tcntad said:
Flash it and backup/extract the recovery/kernel? If you want them seperate from the rom..
All necessary images are in the official roms.
Click to expand...
Click to collapse
Thats the issue, i don't want to wipe my current rom, just because i want to get the kernel and recovery.... If i knew what to extract and how to set it up to install it via odin, i really wouldn't be asking :/
tcntad said:
Flash it and backup/extract the recovery/kernel? If you want them seperate from the rom..
All necessary images are in the official roms.
Click to expand...
Click to collapse
btw how would i even back up this files, without having to root?
Samsung site is down...Can someone point me in the right direction so I can Odin I535VRBMF1
antawnm26 said:
Samsung site is down...Can someone point me in the right direction so I can Odin I535VRBMF1
Click to expand...
Click to collapse
EDIT:
Try this one http://www.androidfilehost.com/?fid=23134718111254196
buhohitr said:
Try this one http://wccftech.com/update-verizon-galaxy-s3-schi535-vrbmf1-android-412-jelly-bean/
Click to expand...
Click to collapse
thanks..will this update my bootloader/modem? I can flash this with twrp?
antawnm26 said:
thanks..will this update my bootloader/modem? I can flash this with twrp?
Click to expand...
Click to collapse
Deleted....sorry I was on another thread and thinking confused. If you want to flash back to stock factory file give me a second see if I can find the tar file for you.
buhohitr said:
This is the original firmware and you must flash it using ODIN. This include rom/bootloader/modem/kernel (everything), it will also wipe your twrp recovery also. After flashed this it will bring your phone back to factory stock. If you're thinking something else don't flash it and just post what you want and people here can help.
Click to expand...
Click to collapse
yes thats what i am looking for the stock rom..but this link is way to small for that and also, I opened it up and it didnt have the tar file in there..Im assuming this link was like a firmware update instead...
antawnm26 said:
yes thats what i am looking for the stock rom..but this link is way to small for that and also, I opened it up and it didnt have the tar file in there..Im assuming this link was like a firmware update instead...
Click to expand...
Click to collapse
OK, here is the full firmware, unzip then flash with ODIN. This included rom/bootloader/modem/kernel(everything). This will bring back to factory stock rom.
http://www.androidfilehost.com/?fid=23134718111254196
buhohitr said:
OK, here \s the full firmware, unzip then flash with ODIN. This included rom/bootloader/modem/kernel(everything). This will bring back to factory stock rom.
http://www.androidfilehost.com/?fid=23134718111254196
Click to expand...
Click to collapse
thanks.thats what i needed....is it recommended that you update the baseband with this?http://forum.xda-developers.com/showthread.php?t=1788313&highlight=vrbmf1
antawnm26 said:
thanks.thats what i needed....is it recommended that you update the baseband with this?http://forum.xda-developers.com/showthread.php?t=1788313&highlight=vrbmf1
Click to expand...
Click to collapse
If you already have strong signal and no issue with data drop, then you don't need to upgrade, otherwise yes you could upgrade and possible it may cure your poor signal...hopefully. In my case, this new radio did nothing to my phone signal.