i just flash the I9000JH1 to the phone ,i still havent install the kernel to the phone yet and it had boot the home page. and i follow the instruction to reflash again. with Odin3 after i will flashing the CSC and PDA file i unplug and restart the phone and i goes to android system recovery <2e> and i try to reboot but the power button not working....it said
sasung recovery utils
-for BML-
reboot system now
apply sdcard: update.zip
wipe data/factory reset
wipe cache partition
but i can use vol up and down to scroll up and down, but can select the item, the power button is not working.
down there had some yellow words
update media, please wait ...
update media, finished
#menu mode#
- Appling Multi-CSC...
installing Multi-CSC
that the only word it wrote, so wht can i do, is there had any method to reflash the thing??cuz the computer also cant recognize the phone, Thanks
hi ron
im just a noob but i have the same problem yesterday =)
u must flash an kaptivate kernel for a workung power button in the recovery menu!
http://forum.xda-developers.com/showthread.php?t=782413
but i cant even boot up the phone, it stuck in the recovery mode
ron671 said:
but i cant even boot up the phone, it stuck in the recovery mode
Click to expand...
Click to collapse
You need to pull the battery, put it back, and try one of the button combinations to get it into download mode on next boot. Your easiest route is either both volume buttons, and plug in USB without pressing power (which works on the Captivate), or hold just volume down and plug in USB (which is the right combination for an i9000). With one of these the phone should automatically power into the download mode. Get Odin one click ready to flash stock before you put the phone into download mode and hit start when it recognizes the device. If that won't work. try the other key combinations keeping in mind that they change when you flash an i9000 image, so you should try all Captivate combinations, and all i9000 combinations. Since the Captivate lacks a physical home button, anything that involves that will not work, which is the reason why you are stuck in recovery. The i9000 recovery is expecting you to press the home button to select (unlike the power on the stock Captivate).
also, ADB commands should work while the phone is in recovery mode
Same Problem
The Key combination Vol +, Vol - and the power button power cycles the phone whether or not the phone is in recovery mode or off. I am having the same problem, and there are no key combinations that worked for me. For now, I am permanently stuck in recovery mode. I could use some help here, as I have tried everything.
Oh, for the I9000 ROM installed on the captivate, adb commands do not work. While the phone is in recovery mode, you cannot connect to the PC.
I have found though, that by booting into the recovery menu, plugging in your USB cord and then taking out/putting in the battery will put into an unknown upload mode which does connect it to the computer, but not in a way that allows Odin or adb to run. There might be a way to flash/work with the phone, but I don't know how. Any help would be appreciate, as it is not in disk mode.
rajendra82 said:
You need to pull the battery, put it back, and try one of the button combinations to get it into download mode on next boot. Your easiest route is either both volume buttons, and plug in USB without pressing power (which works on the Captivate), or hold just volume down and plug in USB (which is the right combination for an i9000). With one of these the phone should automatically power into the download mode. Get Odin one click ready to flash stock before you put the phone into download mode and hit start when it recognizes the device. If that won't work. try the other key combinations keeping in mind that they change when you flash an i9000 image, so you should try all Captivate combinations, and all i9000 combinations. Since the Captivate lacks a physical home button, anything that involves that will not work, which is the reason why you are stuck in recovery. The i9000 recovery is expecting you to press the home button to select (unlike the power on the stock Captivate).
Click to expand...
Click to collapse
madetoservehim said:
The Key combination Vol +, Vol - and the power button power cycles the phone whether or not the phone is in recovery mode or off. I am having the same problem, and there are no key combinations that worked for me. For now, I am permanently stuck in recovery mode. I could use some help here, as I have tried everything.
Oh, for the I9000 ROM installed on the captivate, adb commands do not work. While the phone is in recovery mode, you cannot connect to the PC.
I have found though, that by booting into the recovery menu, plugging in your USB cord and then taking out/putting in the battery will put into an unknown upload mode which does connect it to the computer, but not in a way that allows Odin or adb to run. There might be a way to flash/work with the phone, but I don't know how. Any help would be appreciate, as it is not in disk mode.
Click to expand...
Click to collapse
1. Take out battery and put it back in
2a Hold Vol Up+Vol Down (Do not press power)
or
2b Hold Vol Down (Do not press power)
3. Plug in USB cable connected to computer (Still do not press power)
If the phone behaves like a Captivate, after using 2a and 3, you should be in download mode. If the phone behaves like an i9000, after 2b and 3, you should be in Download mode.
Response & Update
Have tried both of these options. Either way you do it, the phone still goes back into recovery mode. There was talk about using a custom kernel that would allow you to use the power button as the select button. Is there any way to use adb in recovery mode, so you can install the modified kernel, or reboot to download mode? If not, I started a thread on this question that can be found here as well:
rajendra82 said:
1. Take out battery and put it back in
2a Hold Vol Up+Vol Down (Do not press power)
or
2b Hold Vol Down (Do not press power)
3. Plug in USB cable connected to computer (Still do not press power)
If the phone behaves like a Captivate, after using 2a and 3, you should be in download mode. If the phone behaves like an i9000, after 2b and 3, you should be in Download mode.
Click to expand...
Click to collapse
Did you ever fix this? I'm stuck in recovery mode now and none of the button combinations work
I have the exact same problem. Have you had any luck figuring out how to get the phone to reboot?
really people??
can you not follow step by step instructions?
http://forum.xda-developers.com/showthread.php?t=734871
Pirateghost said:
really people??
can you not follow step by step instructions?
http://forum.xda-developers.com/showthread.php?t=734871
Click to expand...
Click to collapse
I am sure they can.
The 2e and 3e Download and Recovery modes were disabled by Samsung in later models of the SGS. It is not possible to get there using a combination of buttons etc.,
How to install the Download/Recovery Mode fix (3 Button Disabled SPL fix) http://forum.xda-developers.com/showthread.php?t=785201
There may be another method using an AnyWay JIG cable: which is a MicroB USB to Standard USB connector where I think one crosses pin 3 and 4 with a 301kOhm resister 1% tolerance, 1/4Watt. It would be best to search this forum for precise instructions.
Win for a dumb f%^k
well this isnt a good answer but i have a phone that went as discribed, no respose to three button, and unable to flash or get off the system reset screen on start up work on it for about 6 hour then left it when i came back i turned it on plug in the usb and CMD'ed adb reboot download and what did you know this time it worked? reset from that screen and it return to normal sooo.... um good luck and there is a way out just not shore what exactly it is
good for some
okey after fidling around i found my phone responded to adb ie download adb open a cmd line and typing adb reboot download. from there i just cycled the power hold down the power button a while and it rebooted to normal working order. though i still cant get 3 button even with flashing the fix so no hacking for me hope this helps
I'm using the Samsung Fascinate, i500 and i got stuck on the same screen too!!! i just double tapped the home button and rebooted the phone
I was able to get out of a 2e loop by running adb reboot download with odin open, then reflashed from there. Went through the same process twice since cognition 2.3b8 does not want to install on my phone. had no problem with b7 install.
Instructions were not that great. But Thanks -I figured it out and am back up.
Same problem here, cant make my phone go to download mode, ok or select key "power button" not working.
already tried the 2 methods before and they not working, (combination of keys)
Vibrant stuck in android system recovery 2e
I know this is not exact help but i just accidentally found myself into download mode after more key combo fiddling. I believe the last combo that got me in was either holding UP + POWER or just UP at the precise moment the screen goes black to reboot. This is after quite a few boot cycles so trial and error seemed to pull it off.
I'd test it again to be more sure but i don't want to risk being stuck again at this point. But I figured i'd speak up now, because i don't plan to have 2e there ever again.
Hello,
I have tried many many system in my tablet and there is nothing working on with me i need someone who can help me to get the tablet back to default system i have tried cyanogenmod all version my tablet is p6200 and i tried everything now its not working anymore , i need some steps to get it back guys
if you want to go stock rom use Odin and download stock rom for you're country from http://www.sammobile.com/firmware/?page=3&model=GT-P6200&pcode=0&os=1&type=3#firmware
when i connect the usb in laptop its shown
USB Device Not Recolonize what shall i do to get the tablet to default and i have tried many things like i root the tablet and i try manyyyyyy roms so please can you tell me what to do exactly i download the kies program in my laptop what i have to do else ?
Not kies but use Odin and put you're tablet in download mode (power + vol down)
explain please give me the link of odin because i dont know it and when i press in power and volume up its shown
Warning
A custom OS can cause critical problems in tablet and installed applications. if you want to download a custom OS, press the voume up key.
otherwise, press the volume down key to cancel
Volume up : Continue
Volume down: Cancel ( restart tablet )
i downloaded odin3 v.1.85 how can i use it to do the Firmwares i extract the files i got 5 files inside them
GT-P6200-MULTI-CSC-OXXLB1_RST.tar.md5
MODEM_P6200XXKL7_REV_04_CL1088622.tar.md5
P6200_APBOOT_P6200XXLB1_CL629097_REV02_user_low_ship.tar.md5
P6200_CODE_P6200XXLB1_CL629097_REV02_user_low_ship_16G.tar.md5
px_20111010_3G_16G.pit
How can i use the files on the program what the steps ?
NightZeus said:
i downloaded odin3 v.1.85 how can i use it to do the Firmwares i extract the files i got 5 files inside them
GT-P6200-MULTI-CSC-OXXLB1_RST.tar.md5
MODEM_P6200XXKL7_REV_04_CL1088622.tar.md5
P6200_APBOOT_P6200XXLB1_CL629097_REV02_user_low_ship.tar.md5
P6200_CODE_P6200XXLB1_CL629097_REV02_user_low_ship_16G.tar.md5
px_20111010_3G_16G.pit
How can i use the files on the program what the steps ?
Click to expand...
Click to collapse
What To Do:
- Make sure Kies is Closed
- Disconnect the Tab from your PC
- Restart your Tab in Download Mode (Power Off Tab then Hold Volume - & Power Button)
- Open Odin , do not change any checkbox items
- Click the PDA button and find the Stock ROM .md5 file and select it (DO NOT HIT START YET)
- Plug in your Tab to the PC at which point the first "ID:COM" box should turn yellow and the Message windows should read "Added"
- Now, Hit Start
- When Completed the "ID:COM" Box should turn Green and right above it it should say "Pass"
The tablet should reboot,
- Disconnect the Tab from your PC
How can i go to download mode if i press on power and volume - its turn to recovery mode how can i go to download mode now
I find how to go to download mode
i open the odin and put the file on PDA and i saw its became yellow and added fine and then i hit start
its not sucess i got faild
what can i do now
try to find a tar.md5 package with a .pit file specifically for your device..,
alternately try flashing a stock Honeycomb ROM.. and booting into recovery and factory reset.
Most importantly research and read, If you can get into Download mode you're 90%+ will be OK
Get ClockworkMod recovery from here
http://forum.xda-developers.com/showthread.php?t=2112667
Use odin to flash it
boot to recovery
wipe system and cache
use odin to install your stock rom again
boot
i'm just about to try and root my galaxy tab 2 10.1 running 4.2.2
following instruction from various web sites it tells me to put the device into download mode by turning the device off then holding vol down and power buttons until I get android icon
when I hold both buttons I get bootloop of Samsung logo until I let go of buttons then I get a
no command error
then the options
reboot system now
apply update from adb
apply update from ex storage
wipe data fact reset
wipe cache partition
apply update from cache
any help to enter download mode would be great
thanks in advance
mgalea1981 said:
i'm just about to try and root my galaxy tab 2 10.1 running 4.2.2
following instruction from various web sites it tells me to put the device into download mode by turning the device off then holding vol down and power buttons until I get android icon
Click to expand...
Click to collapse
For download mode on your tab, you need to hold Power and Volume UP (not Down). Otherwise, you get into the recovery mode...
kt-Froggy said:
For download mode on your tab, you need to hold Power and Volume UP (not Down). Otherwise, you get into the recovery mode...
Click to expand...
Click to collapse
this brings me to a screen that says about flashing a custom rom will void warranty?
is this download mode?
mgalea1981 said:
this brings me to a screen that says about flashing a custom rom will void warranty?
is this download mode?
Click to expand...
Click to collapse
Yes. And you have to press Power or VolDown (I think?) to confirm -- it tells you right there. When you are finally in the download mode, you will see a message like "Downloading. Do not disconnect target..." That's when Odin should recognize your tablet and be able to start flashing.
You press Volume Down and Power. Until it appears the lobo you only keep pressing Volume down and dont power button.
I have a Samsung Galaxy s6 (GM-920F I believe) and after a OTA update to the Marshmallow firmware, it fails to boot up on the Samsung logo (it displays it but doesn't make the sound) and I cannot use the volume keys to access recovery (or download mode). In addition it isn't detected by Odin on vairous PCs (and I've used lots of different micro USB ports). Any help would be appreciated. Thanks
Why you can't boot into download mode? If you press volume down + home button + power button for a very long time, it should boot into download mode.
forumber2 said:
Why you can't boot into download mode? If you press volume down + home button + power button for a very long time, it should boot into download mode.
Click to expand...
Click to collapse
My phone's volume buttons haven't worked in ages and they don't work now either
Hello, I have a big problem with rebooting to recovery mode. I can reboot to recovery only with application. If I turn my phone off and then hold volume up + power, then I get black screen with only one yellow Chinese text on the very top left side and then after 1 minute it's get into Chinese recovery.. My question is: how to get into custom recovery without using applications like for example "Quick boot".
I need it, because I have to install ROM again, because I did a big mistake, when I deleted one file from the "system" folder. Now my phone boot without problem, but after that everything is lagging and all applications stop working, then it automatically reboot phone..
I can't flash firmware with SP Flash Tool, because of Windows drivers. My laptop does not recognize the phone. It says: "Unknown USB device".. That's why I need to get into custom recovery for installing ROM.
Thank you in advance for help.
This helped:
With the phone powered off
Hold Volume Up + Volume Down + Power button
When phone vibrates release power button only.
As the No Comman Screen release all buttons.
Press and hold the power button and tap the Volume Up button.
Release the buttons. You must get into recovery mode.
Thanks to: Moto_Joy