Big mistake trying to flash CM10 - HTC Sensation

Hey guys, I'm in a bit of a pickle.
I unlocked my HTC Sensation through the HTCDev site and through the recovery, even with S-ON I went straight to flashing CM10 through CWM.
Now all I see is the CM10 boot screen and I cannot connect my phone to the computer either. However, I can still mount files onto the SD card through recovery. I am able to flash CM9 but its the same problem where it just boots forever.
If anyone had any ideas or suggestions, it would be greatly appreciated. Thanks.
On the Fastboot screen it says
UNLOCKED
PYRAMID PVT SHIP S-ON RL
HBOOT 1.27.0000

cokezor said:
Hey guys, I'm in a bit of a pickle.
I unlocked my HTC Sensation through the HTCDev site and through the recovery, even with S-ON I went straight to flashing CM10 through CWM.
Now all I see is the CM10 boot screen and I cannot connect my phone to the computer either. However, I can still mount files onto the SD card through recovery. I am able to flash CM9 but its the same problem where it just boots forever.
If anyone had any ideas or suggestions, it would be greatly appreciated. Thanks.
On the Fastboot screen it says
UNLOCKED
PYRAMID PVT SHIP S-ON RL
HBOOT 1.27.0000
Click to expand...
Click to collapse
hi,
see here
http://forum.xda-developers.com/showthread.php?t=1631861
this is what you need

cokezor said:
Hey guys, I'm in a bit of a pickle.
I unlocked my HTC Sensation through the HTCDev site and through the recovery, even with S-ON I went straight to flashing CM10 through CWM.
Now all I see is the CM10 boot screen and I cannot connect my phone to the computer either. However, I can still mount files onto the SD card through recovery. I am able to flash CM9 but its the same problem where it just boots forever.
If anyone had any ideas or suggestions, it would be greatly appreciated. Thanks.
On the Fastboot screen it says
UNLOCKED
PYRAMID PVT SHIP S-ON RL
HBOOT 1.27.0000
Click to expand...
Click to collapse
Yeah I've seen that but in my phone's current state I can't connect through debugging or anything, I can just move things into the SD card if I needed to. I can't use anything on my computer to fix it.

cokezor said:
Yeah I've seen that but in my phone's current state I can't connect through debugging or anything, I can just move things into the SD card if I needed to. I can't use anything on my computer to fix it.
Click to expand...
Click to collapse
you could use a PG58IMG.zip to flash 4ext recovery from bootloader
but unfortunately you are S-ON(i was searching for that zip somewhere here but it requires to be S-OFF)
also you said that you don't have enabled usb debugging mode
then i can only see one option.using a ruu.exe and return back to zero
see here
http://forum.xda-developers.com/showthread.php?t=1672425
best wishes

Boot into fastboot and flash 4ext via fastboot commands on your computer.
Once you have 4ext on your phone, ensure to enable Smart Flash in tools and wipe and reflash your ROM.
Sent from my HTC Sensation using xda app-developers app

rzr86 said:
you could use a PG58IMG.zip to flash 4ext recovery from bootloader
but unfortunately you are S-ON(i was searching for that zip somewhere here but it requires to be S-OFF)
also you said that you don't have enabled usb debugging mode
then i can only see one option.using a ruu.exe and return back to zero
see here
http://forum.xda-developers.com/showthread.php?t=1672425
best wishes
Click to expand...
Click to collapse
Hi again! Reading this method he says that I'd have to execute it through my computer. I don't know if it'll work if I executed it through the boot loader but I'll try.

cokezor said:
Hi again! Reading this method he says that I'd have to execute it through my computer. I don't know if it'll work if I executed it through the boot loader but I'll try.
Click to expand...
Click to collapse
All you have to do is flash 4EXT Recovery using fastboot, then enable Smart Flash in 4EXT, wipe, then reflash...no need to run an RUU.
Sent from my HTC Sensation using xda app-developers app

troby86 said:
Boot into fastboot and flash 4ext via fastboot commands on your computer.
Once you have 4ext on your phone, ensure to enable Smart Flash in tools and wipe and reflash your ROM.
Sent from my HTC Sensation using xda app-developers app
Click to expand...
Click to collapse
Unfortunately I can't run commands through my my computer to my phone

cokezor said:
Hi again! Reading this method he says that I'd have to execute it through my computer. I don't know if it'll work if I executed it through the boot loader but I'll try.
Click to expand...
Click to collapse
Download the 4EXT Recovery file...rename it to recovery.img, connect your phone to your laptop in fastboot mode, ensure your phone says fastboot usb, run adb from your computer and type the command "fastboot flash recovery recovery.img". Also, ensure the recovery.img is in the same folder as adb.
Sent from my HTC Sensation using xda app-developers app
---------- Post added at 06:48 PM ---------- Previous post was at 06:46 PM ----------
Oh OK. Sorry. Any reason you can't run the fastboot commands? Do you have the drivers installed?
Sent from my HTC Sensation using xda app-developers app
---------- Post added at 06:51 PM ---------- Previous post was at 06:48 PM ----------
In order to run an RUU, you would have to run "fastboot oem lock" which you can't do.
Sent from my HTC Sensation using xda app-developers app

troby86 said:
Download the 4EXT Recovery file...rename it to recovery.img, connect your phone to your laptop in fastboot mode, ensure your phone says fastboot usb, run adb from your computer and type the command "fastboot flash recovery recovery.img". Also, ensure the recovery.img is in the same folder as adb.
Sent from my HTC Sensation using xda app-developers app
---------- Post added at 06:48 PM ---------- Previous post was at 06:46 PM ----------
Oh OK. Sorry. Any reason you can't run the fastboot commands? Do you have the drivers installed?
Sent from my HTC Sensation using xda app-developers app
---------- Post added at 06:51 PM ---------- Previous post was at 06:48 PM ----------
In order to run an RUU, you would have to run "fastboot oem lock" which you can't do.
Sent from my HTC Sensation using xda app-developers app
Click to expand...
Click to collapse
It worked fine before I flashed the CM10 onto my phone now I get an unrecognized device whenever I plug my phone in during fastboot. I point the drivers correctly and it just says that my drivers are up to date.
EDIT: If I try to run commands, I just get "waiting for device"

cokezor said:
It worked fine before I flashed the CM10 onto my phone now I get an unrecognized device whenever I plug my phone in during fastboot. I point the drivers correctly and it just says that my drivers are up to date.
Click to expand...
Click to collapse
Have you tries a different USB port, or manually reinstall the drivers? Be sure when you manually install the drivers, do it with your phone unplugged. Then once you reinstall the drivers, plug your phone in, and it should work.
Sent from my HTC Sensation using xda app-developers app

troby86 said:
Have you tries a different USB port, or manually reinstall the drivers? Be sure when you manually install the drivers, do it with your phone unplugged. Then once you reinstall the drivers, plug your phone in, and it should work.
Sent from my HTC Sensation using xda app-developers app
Click to expand...
Click to collapse
I've tried to use the driver off of http://www.htc.com/us/support/htc-sensation-4g-tmobile/software-updates but when it runs, nothing pops up. Before this, I didn't need to install drivers before connecting my phone through USB
Could it be because after I unlocked the bootloader, I didn't turn debugging on? Now I don't think I have a way to do that
EDIT: Is is possible that I just get the backup files of someone using the stock and I move it into the restore of clockwork mod and backup from there?

cokezor said:
I've tried to use the driver off of http://www.htc.com/us/support/htc-sensation-4g-tmobile/software-updates but when it runs, nothing pops up. Before this, I didn't need to install drivers before connecting my phone through USB
Could it be because after I unlocked the bootloader, I didn't turn debugging on? Now I don't think I have a way to do that
EDIT: Is is possible that I just get the backup files of someone using the stock and I move it into the restore of clockwork mod and backup from there?
Click to expand...
Click to collapse
it could be possible
but again while you are S-ON cwm recovery won't work ater restoring the backup
with smartflash feature enable from 4ext it has the ability to write also the boot partition
(that's why your rom didn't boot after installing with cwm)
if you want use these drivers instead
http://forum.xda-developers.com/showthread.php?p=35618508#post35618508 (my post #26)

rzr86 said:
it could be possible
but again while you are S-ON cwm recovery won't work ater restoring the backup
with smartflash feature enable from 4ext it has the ability to write also the boot partition
(that's why your rom didn't boot after installing with cwm)
if you want use these drivers instead
http://forum.xda-developers.com/showthread.php?p=35618508#post35618508 (my post #26)
Click to expand...
Click to collapse
Those drivers installed correctly but I still get the same message where the device isn't working properly As of now I've been trying to extract the rom.zip's from RUU files and going to fastboot but I keep getting wrong image or no image

cokezor said:
Those drivers installed correctly but I still get the same message where the device isn't working properly As of now I've been trying to extract the rom.zip's from RUU files and going to fastboot but I keep getting wrong image or no image
Click to expand...
Click to collapse
EDIT: the bootloader will not pick up on the rom.zip as the PG58img.zip method is disabled by htc once you use htcdev.
do you have access to another pc? maybe you could try with that and boot into bootloader and when it says its looking for the drivers let it do an online search before trying to "feed" it drivers. once you have fastboot working just place the attached .img file and place it into your adb folder and open a command prompt there (cmd) then with your phone placed in fastboot usb mode issue the command " fastboot flash recovery recovery.img ". once this has flashed boot into recovery and select tools/enable 4ext smart flash. select yes. then wipe everything and re-flash your cyanogenmod 10 + gapps. reboot and wait up to 10 minutes for the first boot. No need for a ruu pal

THANK YOU GUYS! I followed heavy_metal_man's advice on hooking it up to another computer then I used rdr86's drivers to install it. From there I was able to use fastboot commands and get on to 4ext and flash CM10. It worked great! Except that my main camera isn't working right now. I hope I don't screw it up again next time I update. Thank you both again, I really appreciate it.

cokezor said:
THANK YOU GUYS! I followed heavy_metal_man's advice on hooking it up to another computer then I used rdr86's drivers to install it. From there I was able to use fastboot commands and get on to 4ext and flash CM10. It worked great! Except that my main camera isn't working right now. I hope I don't screw it up again next time I update. Thank you both again, I really appreciate it.
Click to expand...
Click to collapse
glad for you man:good:
about the camera try this:
1)format all partitions except sdcard from 4ext
2)enable smartflash
3)reflash the rom
i hope it will work

THANK YOU GUYS! I followed heavy_metal_man's advice on hooking it up to another computer then I used rdr86's drivers to install it. From there I was able to use fastboot commands and get on to 4ext and flash CM10. It worked great! Except that my main camera isn't working right now. I hope I don't screw it up again next time I update. Thank you both again, I really appreciate it.
Click to expand...
Click to collapse
Any time man.

rzr86 said:
glad for you man:good:
about the camera try this:
1)format all partitions except sdcard from 4ext
2)enable smartflash
3)reflash the rom
i hope it will work
Click to expand...
Click to collapse
I realized I was on an old version of CM10 and I just flashed the most recent one to fix it. Although I don't have a camera shortcut now.. I just got one off the app store and fixed that little problem. Otherwise, I love the look and feel of CM10! Can't imagine going back to stock

Hmmm....I think you should add "while S-ON" on the title

Related

[Q] hboot 1.23 and says s-off but locked

So i was in the middle of following the steps in the s-off and perma root thread and i ran into a problem. Hope someone here is nice enough to help me out.
So i ran revolutionary and everything went smooth. I already had the clockwork mod zip in the root of my sd card so i just rebooted the phone into hboot. When i went into hboot it detected the pg58img file and ran it, it prompted me if i wanted to update and so i did. It rebooted the phone and then i went back into hboot. The hboot said it was 1.23 and said Locked instead of Revolutionary as it displayed previously.
When i try to run the pg58 file in hboot an error occurs and said it is not compatible and only asks me to power off. So now at this moment it displays 1.23 version of hboot and s-off and says locked.
What can i do after this point? Any help i can get would be fantastic, thanks.
You're still good.
You're locked out of some of the most advanced fastboot commands. But that's it.
You still have S-Off. ADB will still work. You can flash ROM's. Etc etc etc....
It's a known problem. But it's not really a problem.
It's not like you divided by zero and destroyed the fabric of the universe or anything.
This is a noob question but how would i install clockwork recovery? I thought i would try dl from market but it said i didnt have root permission(obviously)
Is there a thread that has a solution to my issue or maybe you can quickly guide me out of this? lol Just kind of confused as to what i should do next lol.
Look in the development section for a thread called guide to s-off.
Skip the s-off part since you've done that.
Go right to the part about installing recovery. Following the directions. It's incredibly easy. It'll take about 3 minutes.
Once you have clcokwork recovery you can flash custom ROMs. You don't actually have to root the stock ROM. (Though you should make a backup of it just for kicks. You can do it all through clockwork recovery)
Yea I tried it multiple times already. I have the pg58 file in the root of the sd and when i go to the hboot it says
"Model ID incorrect!
Update Fail!
Press <POWER> to reboot."
Thats the only option it gives me so i am not able to install clockwork recovery.
Do you have SuperCID?
no i do not, would that fix the issue? i thought that is just for installing any rom on the device. My issue is that i cant get recovery to work.
I would think that is the next step after i run the perma root zip.
jonslaught said:
no i do not, would that fix the issue? i thought that is just for installing any rom on the device. My issue is that i cant get recovery to work.
I would think that is the next step after i run the perma root zip.
Click to expand...
Click to collapse
It should. Follow the SuperCID instructions here. Then update your firmware via the bootloader with this package that rmk made. It includes ClockworkMod Recovery.
Cool, thanks. I will definately try this as soon as I get off work later today and post up a status regarding the issue
Sent from my HTC Sensation 4G using xda premium
aNYthing24 said:
It should. Follow the SuperCID instructions here. Then update your firmware via the bootloader with this package that rmk made. It includes ClockworkMod Recovery.
Click to expand...
Click to collapse
He doesn't have use of Fastboot commands. I am pretty sure they are needed for super CID. Let me check.
He can't super CID as Fastboot commands are used.
Have you tried to run the correct RUU.exe? I think that would change back your h boot. There are zips in the development section you can use to downgrade but you may need super CID to use them.
Sent from my HTC Sensation 4G XE with Beats Audio using xda premium
Rhiannon224 said:
He doesn't have use of Fastboot commands. I am pretty sure they are needed for super CID. Let me check.
He can't super CID as Fastboot commands are used.
Click to expand...
Click to collapse
Yes, he does. CID commands will work with 1.23.xxxx. I've done it myself. Advanced fastboot commands won't work (he can't flash a radio through fastboot).
aNYthing24 said:
Yes, he does. CID commands will work with 1.23.xxxx. I've done it myself. Advanced fastboot commands won't work (he can't flash a radio through fastboot).
Click to expand...
Click to collapse
So basic Fastboot commands work with h boot 1.23? Good to know, my bad.
Sent from my HTC Sensation 4G XE with Beats Audio using xda premium
Rhiannon224 said:
So basic Fastboot commands work with h boot 1.23? Good to know, my bad.
Click to expand...
Click to collapse
Yeah, I had SuperCID to flash the new firmware to use an ICS ROM, then changed it back to the T-Mobile one after. No worries, it's confusing.
aNYthing24 said:
It should. Follow the SuperCID instructions here. Then update your firmware via the bootloader with this package that rmk made. It includes ClockworkMod Recovery.
Click to expand...
Click to collapse
I have the same problem. The Super CID does not work for me because when I type adb devices two blank lines show up, can't get the device number. I followed the instructions to the letter and usb debugging is on.
eagle_101 said:
I have the same problem. The Super CID does not work for me because when I type adb devices two blank lines show up, can't get the device number. I followed the instructions to the letter and usb debugging is on.
Click to expand...
Click to collapse
Do you have the correct drivers installed?
Sent from my HTC Sensation 4G XE with Beats Audio using xda premium
eagle_101 said:
I have the same problem. The Super CID does not work for me because when I type adb devices two blank lines show up, can't get the device number. I followed the instructions to the letter and usb debugging is on.
Click to expand...
Click to collapse
What mode are you in when you are in adb?
Rhiannon224 said:
Do you have the correct drivers installed?
Sent from my HTC Sensation 4G XE with Beats Audio using xda premium
Click to expand...
Click to collapse
I have adb tools only.
im having the same problem, but i can access recovery and i flashed a ROM but my screen freezes during boot. when i go into bootloader is says locked, 1.23.0000 s-off i can access fastboot and recovery i just dont know what to do from here, i installed a ROM and it was successful but i cant get passed the beats audio screen during boot up.
eagle_101 said:
I have adb tools only.
Click to expand...
Click to collapse
Okay, I am not near a pc atm so I cannot look where they are located, if you have the adb tools you also need another program called Net Framework installed on your pc.
Make sure your phone is powered onvand usb debugging checked when plugged into pc. I find it easiest to hold the mouse over the adb tools folder, press alt & ctrl keys and right click on the mouse and choose open command window here. Now type the command "adb devices".
Good luck.
Sent from my HTC Sensation 4G XE with Beats Audio using xda premium
shehade08 said:
im having the same problem, but i can access recovery and i flashed a ROM but my screen freezes during boot. when i go into bootloader is says locked, 1.23.0000 s-off i can access fastboot and recovery i just dont know what to do from here, i installed a ROM and it was successful but i cant get passed the beats audio screen during boot up.
Click to expand...
Click to collapse
First boot can take 10 minutes to load as the Davilk cache is being recreated. Also, did you perform a full wipe first and check the Md5 checksums, make sure your downloaded ROM is not corrupt.
Sent from my HTC Sensation 4G XE with Beats Audio using xda premium

[Q] IN a huge need of help!

hey guys, my phone is unlocked but s-on because i have to use htcdev (wrong writing of s-on) and now its stuck at hboot, nothing i can do works. Is there any way that i can mount my phone to the computer while its in hboot? is there anything like this for sensation? http://androidforums.com/incredible...ivers-adb-bootloader-disk-drive-htc-sync.html
I mean mounting as it so i can acess what is on the phone because although it says fastboot USBs it also says on the computer, please insert disk into removable disk (I), which i know is the one for this phone.
Thanks.
Try flashing Stock RUU.
Sent from my HTC Sensation Z710e using xda premium
i tried it a few times but it either looses connections halfway through but in the end always comes up with error 155 it cannot update the version of android, ive tried with the original, old and new.
ive tried:
fastboot flash recovery PG58IMG.zip it says sending recovery.....OK writing recovery failed.
I tried the same aboev with boot instead of recovery but still the same message.
is there anything i can do to get it to work again!
Do you have the drivers installed?
Shouldn't your PC still load up the phone?
Sent from my Sensation 4g using XDA App
sensation lover said:
hey guys, my phone is unlocked but s-on because i have to use htcdev (wrong writing of s-on) and now its stuck at hboot, nothing i can do works. Is there any way that i can mount my phone to the computer while its in hboot? is there anything like this for sensation? http://androidforums.com/incredible...ivers-adb-bootloader-disk-drive-htc-sync.html
I mean mounting as it so i can acess what is on the phone because although it says fastboot USBs it also says on the computer, please insert disk into removable disk (I), which i know is the one for this phone.
Thanks.
Click to expand...
Click to collapse
Do you have adb tools installed? You need the fastboot drivers in the package in order to use fastboot commands. A little more information would be helpful, which h boot version do you have? Also, if you have htc sync installed on your pc uninstall it, you only needed it for drivers.
i have adb tools, my hboot is 1.23. I have fastboot tools and when i typed fastboot flash recovery PG58IMG.zip it said sending.....OK then writing....fail. Is there any other information that i can supply?
I see, have a look here, there is a newer version of h boot with s off and super CID posted here
http://forum.xda-developers.com/showthread.php?t=1459767. Are you running ICS? Because the 1.27 h boot will bootloop with GB ROMS.
1.23 I don't think has advanced fastboot commands working. 1.27 does.
---------- Post added at 03:48 PM ---------- Previous post was at 03:44 PM ----------
I also just found this thread maybe it can help you. Sounds like it's a similar problem. http://forum.xda-developers.com/showthread.php?t=1478828
---------- Post added at 03:50 PM ---------- Previous post was at 03:48 PM ----------
Can you get into fastboot screen on your phone, if so, flash your RUU from there.
I am trying to think of things I am posting as I think of ideas to help you.
Hm well yeah they both require me to put something on my sdcard. However, my computer wont mount it, it doesnt get picked up.. Also, sinec i already have an old PG58img file on my phone, i have to dismount the sdcard to put it into hboot and remount it because it then tries to run the update process for the img file but then reboots into hboot again. My computer just doesnt pick it up? am i missing drivers that are needed? i tried flashing the ruu from fastboot but all the ics ones just give error when they used to go into setup and the others say cannot update version of android.

In a really big trouble (Need help with returning to stock ROM)

So... I got excited about flashing my HTC sensation. I had done it before with ZTE blade and it wasn't that hard.
Long story short... I flashed the ROM, all went succesfully, but now I'm stuck in a bootloop. I can restart to clockwork recovery though. So I'm hoping it's still possible to get back to stock ROM. In that I need your help. I need to get information about which stock ROM to download, and how to flash it. I can't get to home screen to use USB sharing. Neither does Clockwork recovery usb sharing work.
Im stuck with putting the memory card to my other phone, putting the needed files on the memory card and then switching the memory card back to my HTC.
I've searched for hours and hours in google for help, but haven't found anything to match my situation. I have no idea what to do.
I've tried formatting system, wiping system and cache and then running CM10, bootloop. Formatted system, cache etc and flashed CM9, bootloop.
I have no idea what to do.
PLEASE HELP!
Did you flash firmware?
Sent from my HTC Sensation using xda app-developers app
Are you sure your s off? Otherwise enable smartflash within 4ext.
So my HBOOT version is 1.27.0.0
And i did the Token ID thing, wasn't that putting it to S-off?
How to check if my firmware is updated? I think I did it but I'm not sure. Tell me the things you need to know.
Laitila said:
So my HBOOT version is 1.27.0.0
And i did the Token ID thing, wasn't that putting it to S-off?
How to check if my firmware is updated? I think I did it but I'm not sure. Tell me the things you need to know.
Click to expand...
Click to collapse
If you were able to find your HBOOT version you should also be able to see whether you're s-off or s-on, copy down all the information that appears when you boot into bootloader and post it here.
You need 3.33 firmware from here. Read well before flashing.
Learnings for the future, always nandroid backup before wiping!
goatee84 said:
If you were able to find your HBOOT version you should also be able to see whether you're s-off or s-on, copy down all the information that appears when you boot into bootloader and post it here.
You need 3.33 firmware from here. Read well before flashing.
Learnings for the future, always nandroid backup before wiping!
Click to expand...
Click to collapse
Tried to flash CM10 again, still bootlooping.
Here's my info from bootloader.
Unlocked
Pyramid PVT SHIP S-ON RL
HBOOT- 1.27.0000
eMMC-boot
Jan 13 2012 17:33
Laitila said:
Tried to flash CM10 again, still bootlooping.
Here's my info from bootloader.
Unlocked
Pyramid PVT SHIP S-ON RL
HBOOT- 1.27.0000
eMMC-boot
Jan 13 2012 17:33
Click to expand...
Click to collapse
Ok so in order to flash a ROM you either need to be s-off or get 4EXT recovery and enable smart-flash.
Again, you need the correct firmware so please make sure you get what you need from the link in my first reply.
As you are S-ON and HTCDEV Unlocked, you need to flash the 4EXT Recovery, enable smartflash in the settings and flash the rom. Then you will be fine! Follow this thread: http://forum.xda-developers.com/showthread.php?t=1631861
matekaneve said:
As you are S-ON and HTCDEV Unlocked, you need to flash the 4EXT Recovery, enable smartflash in the settings and flash the rom. Then you will be fine! Follow this thread: http://forum.xda-developers.com/showthread.php?t=1631861
Click to expand...
Click to collapse
So, it seems that the phone is bricked? Is there no way to bring it back? :C
I've got S-on, no backup and my usb doesnt recognize the phone when I'm in bootloader mode. And I can't get to home screen because of bootloop. 4ex thing needs usb and so does every other thing seem to need? Am I completely ****ed?
Argh, I knew I shouldnt have touched these things :C
Laitila said:
So, it seems that the phone is bricked? Is there no way to bring it back? :C
I've got S-on, no backup and my usb doesnt recognize the phone when I'm in bootloader mode. And I can't get to home screen because of bootloop. 4ex thing needs usb and so does every other thing seem to need? Am I completely ****ed?
Argh, I knew I shouldnt have touched these things :C
Click to expand...
Click to collapse
You are far from bricked. You need to get into recovery and mount usb storage. You can probably do it in clockworkmod but I've never used it so I don't know, if you're having trouble get 4ext recovery (since you do have a way of getting stuff onto your sd as you said in your first post), and you can toggle usb storage from there.
goatee84 said:
You are far from bricked. You need to get into recovery and mount usb storage. You can probably do it in clockworkmod but I've never used it so I don't know, if you're having trouble get 4ext recovery (since you do have a way of getting stuff onto your sd as you said in your first post), and you can toggle usb storage from there.
Click to expand...
Click to collapse
I understood from the 4ext recovery that you need to get usb connection working, without it, there's pretty much nothing to do. I can only get things to my sd card with my other phone, but since i'm s-on, i can't flash it from cwm. At least that's what I've understood. I'm starting to get annoyed. I really don't have money for another phone, and I know that I was really stupid to even try flashing.
If there is a way still, I'm gonna try it, but I can't establish usb connection. When I connect my phone to usb in CWM, it says drivers couldn't be installed.
goatee84 said:
You are far from bricked. You need to get into recovery and mount usb storage. You can probably do it in clockworkmod but I've never used it so I don't know, if you're having trouble get 4ext recovery (since you do have a way of getting stuff onto your sd as you said in your first post), and you can toggle usb storage from there.
Click to expand...
Click to collapse
The thing is, I can't get an usb connection to my phone AT ALL. And I'm stuck in a bootloop and I'm S-ON without a backup. So only thing I do have is unlocked phone and i can boot to fastboot and can get to CWM recovery. Still, I've understood that it ain't enough. I need an usb connection with my phone to my PC. Which for the life of mine I can't get to work.
Any ideas are appreciated. I'm getting desperate :C
Laitila said:
I understood from the 4ext recovery that you need to get usb connection working, without it, there's pretty much nothing to do. I can only get things to my sd card with my other phone, but since i'm s-on, i can't flash it from cwm. At least that's what I've understood. I'm starting to get annoyed. I really don't have money for another phone, and I know that I was really stupid to even try flashing.
If there is a way still, I'm gonna try it, but I can't establish usb connection. When I connect my phone to usb in CWM, it says drivers couldn't be installed.
Click to expand...
Click to collapse
You can still flash 4ext via fastboot. Go to this thread and some way down the OP look for the line "there's a direct download for a version you can flash via fastboot".
Are you familiar with adb? You need to download the recovery.img using the link above and flash it via adb. Read this.
If you are in fastboot and connect your cable, does it read "fastboot USB"? You can flash 4ext from fastboot!
Did you follow the steps from the guide I linked before? You are already unlocked, install the 4ext recovery, enable "smartflash" in settings and flash the Rom you have chosen.
Sent from my HTC Sensation Z710e
Laitila said:
The thing is, I can't get an usb connection to my phone AT ALL. And I'm stuck in a bootloop and I'm S-ON without a backup. So only thing I do have is unlocked phone and i can boot to fastboot and can get to CWM recovery. Still, I've understood that it ain't enough. I need an usb connection with my phone to my PC. Which for the life of mine I can't get to work.
Any ideas are appreciated. I'm getting desperate :C
Click to expand...
Click to collapse
Ok so when you first boot into bootloader you should have:
HBOOT
<VOL UP> to previous item etc. etc.
FASTBOOT
RECOVERY
FACTORY RESET
SIMLOCK
IMAGE CRC
Then by selecting FASTBOOT you should be able to connect your usb cable and it will change to FASTBOOT USB. If not you need to be sure you have the correct drivers properly installed on your PC.
goatee84 said:
You can still flash 4ext via fastboot. Go to this thread and some way down the OP look for the line "there's a direct download for a version you can flash via fastboot".
Are you familiar with adb? You need to download the recovery.img using the link above and flash it via adb. Read this.
Click to expand...
Click to collapse
I'm getting real tired, have to go to sleep, but on a quick glance it seemed that with fastboot and adb, you need to have somekind of connection with the pc, right? You can't push commands to your phone without a connection? And I can't get to usb-debugging. I can only use CWM, and it doesn't help.
I'm starting to loose hope, but I'll try to check those threads tomorrow, maybe tomorrow I can save my phone, maybe not.
But thanks alot guys, a really REALLY friendly community. I know it ain't fun trying to help people with their problems, but I appreciate what you're trying to do
Laitila said:
I'm getting real tired, have to go to sleep, but on a quick glance it seemed that with fastboot and adb, you need to have somekind of connection with the pc, right? You can't push commands to your phone without a connection? And I can't get to usb-debugging. I can only use CWM, and it doesn't help.
I'm starting to loose hope, but I'll try to check those threads tomorrow, maybe tomorrow I can save my phone, maybe not.
But thanks alot guys, a really REALLY friendly community. I know it ain't fun trying to help people with their problems, but I appreciate what you're trying to do
Click to expand...
Click to collapse
Yep, you need to be connected to your PC via USB, with drivers installed (I used this) and FASTBOOT selected in bootloader, at which point it SHOULD say FASTBOOT USB.
At this point you can use fastboot commands to flash the recovery.img I previously linked you to, then you will have 4ext recovery and you will be able to set up smart flash to allow you to flash whilst s-on. Only once you get to that stage can you start thinking about flashing firmware and custom ROMS.
And don't lose hope, plenty of phones have been resurrected from far worse conditions. Just requires some patience and careful reading. Don't do anything until you make sure you understand what it is you're about to do.
---------- Post added at 11:48 PM ---------- Previous post was at 11:47 PM ----------
Oh and no need to say thanks....just click it
goatee84 said:
You can still flash 4ext via fastboot. Go to this thread and some way down the OP look for the line "there's a direct download for a version you can flash via fastboot".
Are you familiar with adb? You need to download the recovery.img using the link above and flash it via adb. Read this.
Click to expand...
Click to collapse
ok i downloaded the 4ext file now what!? im having the EXACT same problem. im stuck in a bootloop but im s-off on hboot 1.27.000 and upgraded firmware to 3.33 and still dont know what to do. it looks like 4ext is what to do. but like i said i downloaded the zip file now how do i flash it via fastboot...thats what i wanna know
seangeezy12 said:
ok i downloaded the 4ext file now what!? im having the EXACT same problem. im stuck in a bootloop but im s-off on hboot 1.27.000 and upgraded firmware to 3.33 and still dont know what to do. it looks like 4ext is what to do. but like i said i downloaded the zip file now how do i flash it via fastboot...thats what i wanna know
Click to expand...
Click to collapse
From fastboot, along your usb cable connected and htc drivers/adb are installed, you use the fastboot command: "fastboot flash recovery recovery.img" that's how you can push the recovery on your device. (actually you should have just clicked on the link you quoted and would have found the answer.)
matekaneve said:
From fastboot, along your usb cable connected and htc drivers/adb are installed, you use the fastboot command: "fastboot flash recovery recovery.img" that's how you can push the recovery on your device. (actually you should have just clicked on the link you quoted and would have found the answer.)
Click to expand...
Click to collapse
Helped me! Excellent help from you guys, to the other guy asking for help. Just follow the instructions given. Again, many thanks to the people that helped. You make the world a better place

Okay guys im really stucked trying to repair the phone...

Its my sisters phone, currently stucked at bootsplash screen
I shall post the bootloader information first....
** TAMPERED ***
*** UNLOCKED ***
EVITA PVT SHOP S-ON RL
HBOOT-1.14.0002
RADIO-0.19as.32.0909_L
OpenDSP-vs29.1.0.45.0662
eMMc-boot
Jun 11 2012
CID returned is HTC_044... No matter how i flash recovery, the phone simply reboots... means i cant get into recovery mode.
I tried reflashing boot.img from vipers and relash recovery... doesnt work.
Right now, im trying to flash RUU via zip..... I have relocked my bootloader... Current status is that I managed to send the zip file over... but its stucked at writing for the past 10 mins...
This is the RUU where i extracted the rom.zip from
"RUU_EVITA_UL_ICS_40_S_hTC_Asia_WWE_2.23.707.2_Radio_0.19as.32.09.09_L_10.104b.32.25L_release_271654_signed"
It should be the same as my current rom... which if i read correctly, it will not get updated? that I should use the newer 3.17 RUUs for asia in order to fix?
************************ Update ************************
Okay great... now after waiting for 4332 seconds for the writing part to finish... I knew its not going to work via waiting any longer... I unplugged the USB... the command prompt shows up an error (FAILED, too many links)... I attempted to restart the phone from the HTC logo and now it doesnt start at all... cant even get into bootloader... =.=
************************ Update ************************
Okay I've managed to save my phone using this method http://unlimited.io/qhsusbdload.htm
So now im back to square one... I can go bootloader... i unlocked it again... but i still cant go recovery...
************************ Update ************************
Now its back to being bricked again... as I was working on the phone outside when i managed to unbricked it. I choose to power off the phone from bootloader menu, thinking that I could work on it when I get home... alas, when i got home... the phone doesnt turn on... and i saw the dreaded QHSUSB_DLOAD thingy again...... omg... And the above method no longer works..........
kedirakevo said:
Its my sisters phone, currently stucked at bootsplash screen
I shall post the bootloader information first....
** TAMPERED ***
*** UNLOCKED ***
EVITA PVT SHOP S-ON RL
HBOOT-1.14.0002
RADIO-0.19as.32.0909_L
OpenDSP-vs29.1.0.45.0662
eMMc-boot
Jun 11 2012
CID returned is HTC_044... No matter how i flash recovery, the phone simply reboots... means i cant get into recovery mode.
I tried reflashing boot.img from vipers and relash recovery... doesnt work.
Right now, im trying to flash RUU via zip..... I have relocked my bootloader... Current status is that I managed to send the zip file over... but its stucked at writing for the past 10 mins...
This is the RUU where i extracted the rom.zip from
"RUU_EVITA_UL_ICS_40_S_hTC_Asia_WWE_2.23.707.2_Radio_0.19as.32.09.09_L_10.104b.32.25L_release_271654_signed"
It should be the same as my current rom... which if i read correctly, it will not get updated? that I should use the newer 3.17 RUUs for asia in order to fix?
Click to expand...
Click to collapse
Stuck in a similar problem not sure what to do...
I dont understand why you guys want to relock and run the ruu... why not just flash a stock rom? Less headache
Sent from my One X using xda app-developers app
If you're relocked then you can't flash the zip. The ruu is an exe you need to run it with your phone in fastboot usb
Sent from my VENOMized HoxL
exad said:
I dont understand why you guys want to relock and run the ruu... why not just flash a stock rom? Less headache
Sent from my One X using xda app-developers app
Click to expand...
Click to collapse
how do i flash rom when recovery aint working?
area51avenger said:
If you're relocked then you can't flash the zip. The ruu is an exe you need to run it with your phone in fastboot usb
Sent from my VENOMized HoxL
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1952426
Program says phone's bootloader must be locked in order to flash ruu zip
kedirakevo said:
how do i flash rom when recovery aint working?
Click to expand...
Click to collapse
Unlock boot loader again if its relocked and just fastboot flash twrp.. use the one click tool if you don't know how to flash recovery but as long as boot loader is unlocked you can flash recovery. Once you do, recovery will work again.
Sent from my One X using xda app-developers app
exad said:
Unlock boot loader again if its relocked and just fastboot flash twrp.. use the one click tool if you don't know how to flash recovery but as long as boot loader is unlocked you can flash recovery. Once you do, recovery will work again.
Sent from my One X using xda app-developers app
Click to expand...
Click to collapse
which i stated in my first post that before relocking my bootloader... I have been reflashing the recovery many times but i cant boot into recovery mode....
kedirakevo said:
which i stated in my first post that before relocking my bootloader... I have been reflashing the recovery many times but i cant boot into recovery mode....
Click to expand...
Click to collapse
When you flash recovery is it successful? When you select recovery from boot loader what happens?
Which recovery and version are you flashing?
Sent from my One X using xda app-developers app
exad said:
When you flash recovery is it successful? When you select recovery from boot loader what happens?
Which recovery and version are you flashing?
Sent from my One X using xda app-developers app
Click to expand...
Click to collapse
yea command prompt claimed its sucessful... I used the latest all in one toolkit where the creator claimed to use TWRP 2.4.1.0
kedirakevo said:
yea command prompt claimed its sucessful... I used the latest all in one toolkit where the creator claimed to use TWRP 2.4.1.0
Click to expand...
Click to collapse
Maybe A bad download. Download the latest twrp.
Make sure boot loader is unlocked and you have fastboot usb on in bootloader
Then within toolkit pick flash other recovery and manually select the one you downloaded. Then try selecting recovery in bootloader.
Sent from my One X using xda app-developers app
kedirakevo said:
Program says phone's bootloader must be locked in order to flash ruu zip
Click to expand...
Click to collapse
RUU is an exe the fact it creates a rom.zip is fairly well hidden. Are you running the exe or doing some other crazy thing?
You should not be flashing anything to your phone if you are confusing zip and exe's, it means you lack the basic understanding of computers to be able to complete these tasks without failing.
How did you try to flash the recovery? What recovery did you try to flash? What were the errors given?
EDIT: you should not be using one click tools.
Use fastboot and flash recovery yourself, it is a simple task.
exad said:
Maybe A bad download. Download the latest twrp.
Make sure boot loader is unlocked and you have fastboot usb on in bootloader
Then within toolkit pick flash other recovery and manually select the one you downloaded. Then try selecting recovery in bootloader.
Sent from my One X using xda app-developers app
Click to expand...
Click to collapse
wish I could try that... it bricked now.
twistedddx said:
RUU is an exe the fact it creates a rom.zip is fairly well hidden. Are you running the exe or doing some other crazy thing?
You should not be flashing anything to your phone if you are confusing zip and exe's, it means you lack the basic understanding of computers to be able to complete these tasks without failing.
How did you try to flash the recovery? What recovery did you try to flash? What were the errors given?
EDIT: you should not be using one click tools.
Use fastboot and flash recovery yourself, it is a simple task.
Click to expand...
Click to collapse
the zip file can be obtained via temp folder of the windows directory when you run the exe file.
The all in one toolkit requires the zip so I got it done via that method...
Yes I know how to do it via command prompt but the toolkit is handy...
And lastly you can say my understanding of mobile phone system isnt complete but dont insult me saying I dont understand whats zip and exe......
Bricked? Exactly what is happening.
Sent from my One X using xda app-developers app
exad said:
Bricked? Exactly what is happening.
Sent from my One X using xda app-developers app
Click to expand...
Click to collapse
beats me man... Told you, was trying to flash RUU through zip then it just hung there... but I managed to save my phone... I redownloaded and reflashed recovery as you advised but still no avail! Basically, back to square one....
kedirakevo said:
the zip file can be obtained via temp folder of the windows directory when you run the exe file.
The all in one toolkit requires the zip so I got it done via that method...
Yes I know how to do it via command prompt but the toolkit is handy...
And lastly you can say my understanding of mobile phone system isnt complete but dont insult me saying I dont understand whats zip and exe......
Click to expand...
Click to collapse
I know it can be obtained from temp folder.
Why go to the effort of getting the rom.zip to use in the toolkit when you could simply just run the RUU, which you had to do to get the rom.zip in the first place? Especially when it was failing, why push on with trying to use the toolkit instead of just using the RUU as it was intended by HTC?
I have not much knowledge of the toolkit, but when it flashes zip's is it for normal ROM's or for RUU rom.zip? The rom.zip is not in a format that can normally be used by most tools, it is not the same as flashing a custom ROM.
The toolkit is likely only for installing custom ROM's via pre installed TWRP and not compatible with rom.zip.
You said you were using a RUU zip and complaining it was failing, it appeared at face value you were confusing what the RUU even is.
I am still lost why running the RUU and grabbing the rom.zip from temp folder and then flashing in a toolkit was your chosen method. This just points more towards you are confused about what a RUU is.
I am sure the RUU would work if you just let it run like it is supposed to.
---------- Post added at 02:33 PM ---------- Previous post was at 02:23 PM ----------
kedirakevo said:
was trying to flash RUU through zip then it just hung there.
Click to expand...
Click to collapse
Why?
Personally because of the state you have got the phone in to I would:
1)go get the correct tools. eg fastboot, unlockcode, twrp and rom
2)Ensure phone is charged
3)fastboot oem lock
4)Run RUU.. and try actually running it which means just click next and yes a lot.. no fancy going to temp folders and trying to incorrectly install rom.zip via random tools
5)fastboot flash unlocktoken Unlock_code.bin
6)fastboot flash recovery openrecovery-twrp-2.4.1.0-evita.img
7)fastboot flash boot boot.img (from desired rom)
8)boot into recovery
9)mount USB and transfer desired ROM
10)wipe data and system
11)install ROM
12)reboot in to ROM.
twistedddx said:
I know it can be obtained from temp folder.
Why go to the effort of getting the rom.zip to use in the toolkit when you could simply just run the RUU, which you had to do to get the rom.zip in the first place? Especially when it was failing, why push on with trying to use the toolkit instead of just using the RUU as it was intended by HTC?
I have not much knowledge of the toolkit, but when it flashes zip's is it for normal ROM's or for RUU rom.zip? The rom.zip is not in a format that can normally be used by most tools, it is not the same as flashing a custom ROM.
The toolkit is likely only for installing custom ROM's via pre installed TWRP and not compatible with rom.zip.
You said you were using a RUU zip and complaining it was failing, it appeared at face value you were confusing what the RUU even is.
I am still lost why running the RUU and grabbing the rom.zip from temp folder and then flashing in a toolkit was your chosen method. This just points more towards you are confused about what a RUU is.
I am sure the RUU would work if you just let it run like it is supposed to.
---------- Post added at 02:33 PM ---------- Previous post was at 02:23 PM ----------
Why?
Personally because of the state you have got the phone in to I would:
1)go get the correct tools. eg fastboot, unlockcode, twrp and rom
2)Ensure phone is charged
3)fastboot oem lock
4)Run RUU.. and try actually running it which means just click next and yes a lot.. no fancy going to temp folders and trying to incorrectly install rom.zip via random tools
5)fastboot flash unlocktoken Unlock_code.bin
6)fastboot flash recovery openrecovery-twrp-2.4.1.0-evita.img
7)fastboot flash boot boot.img (from desired rom)
8)boot into recovery
9)mount USB and transfer desired ROM
10)wipe data and system
11)install ROM
12)reboot in to ROM.
Click to expand...
Click to collapse
well... as mentioned, would really love to follow your steps but.... its bricked now... again...
I did run RUU.exe once but it hung for 30 mins without activity... but then again that was when my bootloader was unlocked... then i read that i can relock and do it through ruu.zip instead.... so i went that route.......
Btw I did update my status on my first post...
kedirakevo said:
well... as mentioned, would really love to follow your steps but.... its bricked now... again...
I did run RUU.exe once but it hung for 30 mins without activity... but then again that was when my bootloader was unlocked... then i read that i can relock and do it through ruu.zip instead.... so i went that route.......
Btw I did update my status on my first post...
Click to expand...
Click to collapse
The least risky way would be to flash a stock ROM from here not an ruu. There are some untouched roms. I, myself have bricked running the telus ruu.
Sent from my One X using xda app-developers app

[Q] Stucked in HTC logo

Hello guys, i hope someone can help me. This is my situation:
At the begining i had a stock rom 4.1.1 from AT&T. I succesfully did S-OFF and installed Super CID 1111111. Everything went great but my goal was to install the Germany T-Mobile 4.2.2, so, the next step i did was to follow a tutorial wich guided me to install team win recovery. I copied the rom i mentioned to the sd card and when i tried to flash it failed. So, i did a wipe (Im so stupid ) and now i had no OS. after that, i tried to install ClockWorkMod to follow another tutorial and fix that. I did it using adb but when i tried to reboot in recovery it got stuck in a black screen and i need to push the three buttons for a long time to power it off. Since that, i turn it on, put it in fastboot mode but the console don't even recognize it when i try to use adb (It find no adb devices). So, i did a mess with my phone and i cant find a solution.
Can anyone help me please? Thank you so much guys.
PD: If you need any other details i can let you know anything.
I'm gonna need your bootloader details please. Also, what error did you receive in recovery when trying to flash the T-Mobile ROM?
The reason adb commands aren't working is because you need to use fastboot commands when connected in fastboot mode. I'd suggest flashing TWRP recovery back into the phone, mount the storage, copy a ROM across and flash it.
Sent from my Evita
timmaaa said:
I'm gonna need your bootloader details please. Also, what error did you receive in recovery when trying to flash the T-Mobile ROM?
The reason adb commands aren't working is because you need to use fastboot commands when connected in fastboot mode. I'd suggest flashing TWRP recovery back into the phone, mount the storage, copy a ROM across and flash it.
Sent from my Evita
Click to expand...
Click to collapse
ok, this is all i can see
***TAMPERED***
***UNLOCKED***
EVITA PVT SHIP S-OFF RL
CID-11111111
HBOOT-2.14.000
RADIO-0.24p.32.09.06
openDSP-v34.1.0.45.1219
eMMC-boot
Nov 26 2012, 18:37:14:1706
Is that usefull?
I really dont rememeber exactly, but all i can remember was a Failure red legend in the TWRP. and as i said, i cant get the console to recognize the phone by adb :/
EDIT: i succesfully installed again Team Win Recovery. I moved the EVITA_UL_JB_50_S_TMO_DE_5.08.111.2_By_Turge ROM to the sdcard and try to flash but i it fails in the "Updating partition details...", i cant get any further. No OS.
Yeah that's exactly what I needed to see. Like I said, adb isn't going to work, you need to use fastboot commands. So use fastboot to flash TWRP recovery back onto the phone and try flashing a ROM. If that doesn't work I'd suggest running an RUU.
Sent from my Evita
EDIT: i succesfully installed again Team Win Recovery. I moved the EVITA_UL_JB_50_S_TMO_DE_5.08.111.2_By_Turge ROM to the sdcard and try to flash but i it fails in the "Updating partition details...", i cant get any further. No OS.
Which version of TWRP are you using? Did you check the md5 of the ROM?
Sent from my Evita
HAve tryed all the guides in XDA but just doesnt work.
timmaaa said:
Which version of TWRP are you using? Did you check the md5 of the ROM?
Sent from my Evita
Click to expand...
Click to collapse
hey, i did the same thing and got the same result as him . just cant flash at all.. said " error installation.
do u have anyways like rewipe the whole thing and give me better guide. i wnt to flash back to the normal one.
HTC ONE X AT&T or international ones ( lastest ver )
ray997 said:
hey, i did the same thing and got the same result as him . just cant flash at all.. said " error installation.
do u have anyways like rewipe the whole thing and give me better guide. i wnt to flash back to the normal one.
HTC ONE X AT&T or international ones ( lastest ver )
Click to expand...
Click to collapse
Don't hijack this thread, it'll only confuse matters.
Sent from my Evita
timmaaa said:
Don't hijack this thread, it'll only confuse matters.
Sent from my Evita
Click to expand...
Click to collapse
Hello timmaaa, i really appreciate your help. I did check the md5 checksum and the rom seems to be ok. As i mentioned before, the problems shows up when the flashing process steps to the partition detail "something" process. If you are ok with that, i can let you get into my computer by Teamviewer or some other remote control software so that way you can see anything you need by yourself. I don't know the Team Win Recovery version installed and i'm in my work right know and i didn't bring the htc with me, i'll let you know the version as soon as i get home.
I don't have a PC at the moment so Teamviewer isn't a possibility, just post the TWRP version when you can.
Sent from my Evita
timmaaa said:
I don't have a PC at the moment so Teamviewer isn't a possibility, just post the TWRP version when you can.
Sent from my Evita
Click to expand...
Click to collapse
Ok, no problem. The version of TWRP is v2.5.0.0
That's your problem, 2.5 is full of bugs. Download TWRP 2.6 from here. Put the file in your fastboot folder. Connect phone in fastboot mode, open command prompt from within fastboot folder, issue the following commands:
Code:
fastboot flash recovery "filename.img"
(the exact filename, minus the talking marks)
Code:
fastboot erase cache
Code:
fastboot reboot-bootloader
Now you can enter recovery on your phone and try again.
Sent from my Evita
Twrp One Click Tool Updated to V2.6.0.0 since timmaaa recommended this version alot and pretty Stable....click on my signature for the link..... @timmaaa u deserve Recognized Contributor from XDA since u been help alot of people with your time and knowledge ......:thumbup::thumbup:
Swyped From BlueICESense_JBE
I've never really thought about it, thanks though. All I do is help out when I can.
Sent from my Evita
timmaaa said:
I've never really thought about it, thanks though. All I do is help out when I can.
Sent from my Evita
Click to expand...
Click to collapse
timmaaa, thank your sooo much. You are my hero. everything is working fine again and now i have 4.2.2. Thank you

Categories

Resources