Database Info

How to I remov/uninstall TWRP

Hi All,
I flashed TWRP and installed CleanROM. Now I need to send the phone to fix photo blurry issue. I did restore original telstra ROM.
How can I remove TWRP anh put original recovery image back?
I found the recovery image in TWRP backup folder named recovery.emmc.win. I ran following command and it was successful but when I reset factory the phone, it boot to TWRP and do from there
D:\HTC\Fastboot>Fastboot flash recovery recovery.emmc.win
sending 'recovery' (16383 KB)... OKAY [ 2.404s]
writing 'recovery'... OKAY [ 4.151s]
finished. total time: 6.556s
Click to expand...
Click to collapse
If I lock the boot loader, factory reset failed and boot to boot loader screen with Security warning.
Can someone here please help?
--------------------------------------------------
Edit: is that because the recovery image in backup is TWRP recovery image itself. The original one already is gone?
Thanks.

Post in q and a but run an ruu and your.phone will be back to stock except your bl will say relocked

Hi omario8484,
Can you move to there? where can I find the RUU match for my phone AU Telstra? Can you please help?
I heard wrong RUU could cause serious problem
Thanks.

ncanqn said:
Hi omario8484,
Can you move to there? where can I find the RUU match for my phone AU Telstra? Can you please help?
I heard wrong RUU could cause serious problem
Thanks.
Click to expand...
Click to collapse
There's a telstra RUU here- http://forums.team-nocturnal.com/showthread.php/1005-RUU-One-X-XL-LTE-RUU-s
I don't know what SW version you guys are on, this one might be too old.

_MetalHead_ said:
There's a telstra RUU here- http://forums.team-nocturnal.com/showthread.php/1005-RUU-One-X-XL-LTE-RUU-s
I don't know what SW version you guys are on, this one might be too old.
Click to expand...
Click to collapse
Hi, You are amazing.
My phone details:
HBOOT-1.09.0000
RADIO-0.17a.32.09.03_2
OpenDSP-v25.10.32.0405
eMMc-boot
Apr 2 2012,21:08:24
so this one is good to go RUU_Evita_UL_Telstra_WWE_1.89.841.9_Radio_0.18c.32.09.01_10.93a.32.20L_release_266699_signed.exe ?
appreciate your help.
I have to go all these hassle because of blurry photo. Hope Telstra won't reject warranty because of RELOCKED.

best you can do is relock bootloader and run the ruu. in bootloader run "fastboot oem lock" then run the ruu right away.

DvineLord said:
best you can do is relock bootloader and run the ruu. in bootloader run "fastboot oem lock" then run the ruu right away.
Click to expand...
Click to collapse
Thanks DvineLord,
Most of guide say we need to extract RUU to get recovery.img then run fastboot flash recovery recovery.img before oem lock. should I do that as well?

no you dont have to do that. just "fastboot oem lock" then run ruu.

DvineLord said:
no you dont have to do that. just "fastboot oem lock" then run ruu.
Click to expand...
Click to collapse
Cheers. I will do it now.

Hi All, Mission completed.
You guys are genius.
Appreciated all your helps.

i would still poke around and see if you still have the same camera issue running stock. there is also an updated ota for telstra 2.40.841.4 but if you haven't unlocked using htcdev you might have problems getting root. it might also cause you to have to flash boot.img manually but im not sure since im on at&t.

ncanqn said:
Hi All, Mission completed.
You guys are genius.
Appreciated all your helps.
Click to expand...
Click to collapse
Glad you got it all worked out!

_MetalHead_ said:
Glad you got it all worked out!
Click to expand...
Click to collapse
nice of you to drop by, back from your iphone5 adventure ?

DvineLord said:
i would still poke around and see if you still have the same camera issue running stock. there is also an updated ota for telstra 2.40.841.4 but if you haven't unlocked using htcdev you might have problems getting root. it might also cause you to have to flash boot.img manually but im not sure since im on at&t.
Click to expand...
Click to collapse
Thanks DvineLord. I will send back to see what happens. If they refuse to fix it then I will play around more.

DvineLord said:
no you dont have to do that. just "fastboot oem lock" then run ruu.
Click to expand...
Click to collapse
DivineLord, I also want to revert to the original Telstra ROM. But when I access FASTBOOT the only 'lock' command I see is "SIMLOCK". Is this the option I need to activate to achieve the "fastboot oem lock"?

You hook up the phone to the computer and type that in a command prompt in fastboot like when you unlocked
Sent from my HTC One X using Tapatalk 2

hi, I have a htc one 32gb ,(unlocked but with no root) with team win recovery and i want to delete it. However my htc one does not have a ruu file.

Alp1907 said:
hi, I have a htc one 32gb ,(unlocked but with no root) with team win recovery and i want to delete it. However my htc one does not have a ruu file.
Click to expand...
Click to collapse
If you have the HTC One you're in the wrong forum, this is the HTC One XL forum. You need to go ask in the right place so that people who are experienced with your device can help you.
Sent from my Evita

TWRP Keeps Loading instead of OS!
Hey Guys
last night i decide to install ViperX ROM for my HTC One X (Tegra3) so i first Unlock my Bootloader (HTCDEV Unlock) successfully , download and install the "2.6.3.0 TWRP Recovery" , then Use Fastboot Flash Recovery TWRP.img command to flash my recovery ...
KaaaBooooooom ! Touch is Not Working !
then I download the Hasoon 2000's AIO HTC ONE X Toolkit and install the TWRP 2.4.0.0-JB it worked !
i go and wipe all the options except the External Storage ! , and then SideLoad the VIPERX ROM , and follow the installation Process , it installed successfully , but after restarting , it keeps Loading "TWRP 2.6.3.0" Recovery instead of the OS !
actually when i reboot to BootLoader and and then select RECOVERY , it Loads me the Working 2.4.0.0 JB Recovery .... but when i normally reboot my phone , it keeps loading the TWRP 2.6.3.0 recovery !
i am tired and i want to fix it , please any advises will be strongly appreciated !
Thanks

sobhan1991 said:
Hey Guys
last night i decide to install ViperX ROM for my HTC One X (Tegra3) so i first Unlock my Bootloader (HTCDEV Unlock) successfully , download and install the "2.6.3.0 TWRP Recovery" , then Use Fastboot Flash Recovery TWRP.img command to flash my recovery ...
KaaaBooooooom ! Touch is Not Working !
then I download the Hasoon 2000's AIO HTC ONE X Toolkit and install the TWRP 2.4.0.0-JB it worked !
i go and wipe all the options except the External Storage ! , and then SideLoad the VIPERX ROM , and follow the installation Process , it installed successfully , but after restarting , it keeps Loading "TWRP 2.6.3.0" Recovery instead of the OS !
actually when i reboot to BootLoader and and then select RECOVERY , it Loads me the Working 2.4.0.0 JB Recovery .... but when i normally reboot my phone , it keeps loading the TWRP 2.6.3.0 recovery !
i am tired and i want to fix it , please any advises will be strongly appreciated !
Thanks
Click to expand...
Click to collapse
There are two problems with this post.
1) You're in the wrong device forum, this is the HTC One XL forum.
2) What you're talking about isn't relevant to the thread you've posted in.
You need to head over to the HTC One X forum and ask there, we simply don't have experience with your device here.
Sent from my Evita
---------- Post added at 01:26 AM ---------- Previous post was at 01:02 AM ----------
Try this though, retrieve the boot.img from within the Viper ROM zip, put it in your fastboot folder, connect your phone in bootloader mode, and issue this command:
Code:
fastboot flash boot boot.img
Sent from my Evita

[SOLVED] [Help me revive my sensation[stuck on boot screen while trying s_off]

Ok first things first.. this all is what I did and what's my present situation
1. Unlocked the boooader as per the htc dev site instructions.
2. Tried to soff using jbear method. Every thing went fine untill the jbear utility gave command to restart the device.
After restart, jbear utility failed to recognise the device. It said device not detected, please install device drivers.
3. From that moment onwards, the device is stuck at the white htc bootscreen.
4. I also followed another guide to install custom recovery and custom rom without s off.
I was able to flash a custom recovery, and even the rom. But the device won't move ahead of the bootscreen.
5. Then tried to return to stock using ruu file. But my region ruu is still not available so that method didnt work(3.33.xx.xx asia india).
Have also tried a few more methods but none seem to work.
Help guys.
Phone info:
s-on
Cid 038
bootloader:1.27.0000 unlocked
b band:11.24A.3504.31_M
version main:3.33.720.6
model: PG58813000
Note:Fastboot usb mode seems to work fine.
PS:solution on second page

walkermoon said:
Ok first things first.. this all is what I did and what's my present situation
1. Unlocked the boooader as per the htc dev site instructions.
2. Tried to soff using jbear method. Every thing went fine untill the jbear utility gave command to restart the device.
After restart, jbear utility failed to recognise the device. It said device not detected, please install device drivers.
3. From that moment onwards, the device is stuck at the white htc bootscreen.
4. I also followed another guide to install custom recovery and custom rom without s off.
I was able to flash a custom recovery, and even the rom. But the device won't move ahead of the bootscreen.
5. Then tried to return to stock using ruu file. But my region ruu is still not available so that method didnt work(3.33.xx.xx asia india).
Have also tried a few more methods but none seem to work.
Help guys.
Phone info:
Cid 038
bootloader:1.27.0000
Note:Fastboot usb mode seems to work fine.
b band:11.24A.3504.31_M
version main:3.33.720.6
model: PG58813000
Click to expand...
Click to collapse
Try to make superCID and install RUU or search for 3.32 RUU
Or try flashing http://forum.xda-developers.com/showthread.php?t=1459767&highlight=universal firmware from here 3.33 (there is 058 CID)

TNGrawer said:
Try to make superCID and install RUU or search for 3.32 RUU
Or try flashing http://forum.xda-developers.com/showthread.php?t=1459767&highlight=universal firmware from here 3.33 (there is 058 CID)
Click to expand...
Click to collapse
he has to be on S-OFF to flash a firmware from bootloader and i don't think he achieved S-OFF
what he must to do is enable smartflash from 4ext(if you don't have that recovery use this one)
then flash the rom

rzr86 said:
he has to be on S-OFF to flash a firmware from bootloader and i don't think he achieved S-OFF
what he must to do is enable smartflash from 4ext(if you don't have that recovery use this one)
then flash the rom
Click to expand...
Click to collapse
Yeah exactly.. device is still s–on. And thats what is causing all the troubles i guess. Can't flash europe or asia ruu(cid error).
And i have tried enabling smartflash. Flashed the android revolution rom. Installed fine. But still stuck on bootscreen.
And as I am not s–off, so i dont think 3.32 ruu would work. Correct me if i'm wrong.

Try flashing boot.IMG manually.
I don't exactly remember the fast boot command but since fast boot commands are working then you can try flashing the boot image manually.
Sent from my Ouya

And where do i get this boot image? From ruu?
Sent from my GT-I9100G using xda premium

Not gonna try and bombard you with information I'm not sure why your phone won't boot but I am sure completely installing a new rom (everything) should fix you up so here is what I'll try and lead you to go..
1 use 4ext recovery and enable smart flash and flash a fresh rom.
So are u on 4ext recovery don't worry if your not that HTC unlocked bootloader is just as good as s-off if your bricked and know how to use it
Sent from my HTC Sensation Z710e using xda app-developers app

Get the boot image from the custom ROM. Try to extract it with 7-zip or another similar program
Sent from my Ouya

In the college right now.. give you update as soon as I reach home.

walkermoon said:
In the college right now.. give you update as soon as I reach home.
Click to expand...
Click to collapse
also before flashing any rom
format all partitions except sdcard from 4ext
then enable smartflash and flash the rom

Still no luck
Ok.. i decided to flash a custom rom (ANDROID REVOLUTION)
1. Flashed 4ext recovery
2. Wiped all partitions except sd card.
3. Enabled smartflash.
4. Flashed rom.
5. Rebooted and still stuck at the htc logo screen( m really sick of this logo now).
Did I miss something?

You know those official updates that cone in a format P8500IMG.zip can you try to find that for your phone unfortunately this will probably result in loss of your root
Sent from my HTC Sensation Z710e using xda app-developers app

Cheers guys.. Its back to life again
DON'T HAVE WORDS TO THANK YOU ALL.
Here's what I did..
From my experience.. i believe even after enabling smartflash, the boot image wasn't being flashed.
So what I did is extracted the boot. img from custom rom and flashed it via fastboot.
And voila.. it worked!!
Seems so simple now.. but it took me one week. Wouldn't have been possible without you guys.
Thanks a ton.
Cheers.

AndroidSupporter318 said:
Try flashing boot.IMG manually.
I don't exactly remember the fast boot command but since fast boot commands are working then you can try flashing the boot image manually.
Sent from my Ouya
Click to expand...
Click to collapse
xanda143 said:
Not gonna try and bombard you with information I'm not sure why your phone won't boot but I am sure completely installing a new rom (everything) should fix you up so here is what I'll try and lead you to go..
1 use 4ext recovery and enable smart flash and flash a fresh rom.
So are u on 4ext recovery don't worry if your not that HTC unlocked bootloader is just as good as s-off if your bricked and know how to use it
Sent from my HTC Sensation Z710e using xda app-developers app
Click to expand...
Click to collapse
AndroidSupporter318 said:
Get the boot image from the custom ROM. Try to extract it with 7-zip or another similar program
Sent from my Ouya
Click to expand...
Click to collapse
rzr86 said:
also before flashing any rom
format all partitions except sdcard from 4ext
then enable smartflash and flash the rom
Click to expand...
Click to collapse
Thank you all. Actually all these tips lead to the solution.

OTA Update Problem

Hi all.
Im using HTC One S Tmobile Android 4.1.1, i check update software haveing small update 3.14.531.17 but when i downloaded it, my phone boot to recovery and a progress bar appeared down the bottom and it ran the update. But it runs 20% then stop and red triangle appeared. (I using stock recovery)
My HTC One S is unlock bootloader, super cid 111111 and s-off.
So what is the matter with my phone ? Anyone can help me plz. I will be very grateful.
Sory bcz of my bad English.
Thanks all !

a_new_day1503 said:
Hi all.
Im using HTC One S Tmobile Android 4.1.1, i check update software haveing small update 3.14.531.17 but when i downloaded it, my phone boot to recovery and a progress bar appeared down the bottom and it ran the update. But it runs 20% then stop and red triangle appeared. (I using stock recovery)
My HTC One S is unlock bootloader, super cid 111111 and s-off.
So what is the matter with my phone ? Anyone can help me plz. I will be very grateful.
Sory bcz of my bad English.
Thanks all !
Click to expand...
Click to collapse
First thing, you update your phone with SuperCID and OTA, you get a bricked device.
Next, Remove your supercid, change it to original..
Relock your bootloader.
And try to update again.

khan.orak said:
First thing, you update your phone with SuperCID and OTA, you get a bricked device.
Next, Remove your supercid, change it to original..
Relock your bootloader.
And try to update again.
Click to expand...
Click to collapse
Thanks, i'll try with ur tip.
Sent from my HTC VLE_U using xda app-developers app

khan.orak said:
First thing, you update your phone with SuperCID and OTA, you get a bricked device.
Next, Remove your supercid, change it to original..
Relock your bootloader.
And try to update again.
Click to expand...
Click to collapse
I have change CID to T-MOB010 and relock bootloader but it's still stuck at red triangle
So sad.

a_new_day1503 said:
I have change CID to T-MOB010 and relock bootloader but it's still stuck at red triangle
So sad.
Click to expand...
Click to collapse
Try this Thread
---------- Post added at 07:00 PM ---------- Previous post was at 06:59 PM ----------
a_new_day1503 said:
Thanks, i'll try with ur tip.
Sent from my HTC VLE_U using xda app-developers app
Click to expand...
Click to collapse
I think it is because you have custom recovery. Maybe flashing Stock recovery and then updating would help.

khan.orak said:
Try this Thread
---------- Post added at 07:00 PM ---------- Previous post was at 06:59 PM ----------
I think it is because you have custom recovery. Maybe flashing Stock recovery and then updating would help.
Click to expand...
Click to collapse
Thanks for instruction, i have tried at rc420head's thread, then try to flash your recovery, last time, i flash recovery which exists in firmware.zip inside OTA.zip 3.14.531.17 but it is not still change Any ideas for this case ?

a_new_day1503 said:
Thanks for instruction, i have tried at rc420head's thread, then try to flash your recovery, last time, i flash recovery which exists in firmware.zip inside OTA.zip 3.14.531.17 but it is not still change Any ideas for this case ?
Click to expand...
Click to collapse
What command do you use to flash recovery? how do you flash it?

khan.orak said:
What command do you use to flash recovery? how do you flash it?
Click to expand...
Click to collapse
fastboot flash recovery recovery.img ?
btw for sure, i afraid of wrong, i have flash by HTC One S All in One Toolkit v4.0.

a_new_day1503 said:
fastboot flash recovery recovery.img ?
btw for sure, i afraid of wrong, i have flash by HTC One S All in One Toolkit v4.0.
Click to expand...
Click to collapse
yes that's the correct command. I don't understand what do you mean by installing through HTC All In One Toolkit?
do you have fastboot and adb files?
if yes, place recovery.img there.
Open a command window from there, and use the same command to flash the recovery.

khan.orak said:
yes that's the correct command. I don't understand what do you mean by installing through HTC All In One Toolkit?
do you have fastboot and adb files?
if yes, place recovery.img there.
Open a command window from there, and use the same command to flash the recovery.
Click to expand...
Click to collapse
I flash by direct command, but still error red triangle, then i re-flash ur recovery through HTC One S All in One Toolkit V4.0, but same.
So tired, Do u think i should restore backup rom and dont worry about OTA update ?

a_new_day1503 said:
I flash by direct command, but still error red triangle, then i re-flash ur recovery through HTC One S All in One Toolkit V4.0, but same.
So tired, Do u think i should restore backup rom and dont worry about OTA update ?
Click to expand...
Click to collapse
Try flashing my recovery by direct command.
That small update is for some battery improvements from T-Mobile. Maybe it does make a difference. but not critical. I can achieve high battery times with custom kernels. Maybe you have tried them.

khan.orak said:
Try flashing my recovery by direct command.
That small update is for some battery improvements from T-Mobile. Maybe it does make a difference. but not critical. I can achieve high battery times with custom kernels. Maybe you have tried them.
Click to expand...
Click to collapse
Ok, i will try last time.
Now my Htc One S is : S-Off, Relock bootloader, CID : T-MOB010 and ur stock recovery.

a_new_day1503 said:
Ok, i will try last time.
Now my Htc One S is : S-Off, Relock bootloader, CID : T-MOB010 and ur stock recovery.
Click to expand...
Click to collapse
Still not change : Red triangle

a_new_day1503 said:
Still not change : Red triangle
Click to expand...
Click to collapse
You get a red triangle when you select Recovery on Bootloader screen?

khan.orak said:
You get a red triangle when you select Recovery on Bootloader screen?
Click to expand...
Click to collapse
No, if i boot to recovery from bootloader, i know red triangle is normal.
But i downloaded 3.14.531.17 OTA.zip, then i choose install now, it is automatically boot in to recovery, green progress bar run perhaps 20%, then stop and red triangle appear.

a_new_day1503 said:
No, if i boot to recovery from bootloader, i know red triangle is normal.
But i downloaded 3.14.531.17 OTA.zip, then i choose install now, it is automatically boot in to recovery, green progress bar run perhaps 20%, then stop and red triangle appear.
Click to expand...
Click to collapse
Have you tried this?
Go to Fastboot, enter this code:
Code:
fastboot oem rebootRUU
Then when you see the HTC logo.
Code:
fastboot flash zip firmware.zip
first time it might fail. Do it second time and it will progress. 3 4 tries are normal
EDIT: Wait. Is that an OTA.zip? that's a whole ROM not firmware.

khan.orak said:
Have you tried this?
Go to Fastboot, enter this code:
Code:
fastboot oem rebootRUU
Then when you see the HTC logo.
Code:
fastboot flash zip firmware.zip
first time it might fail. Do it second time and it will progress. 3 4 tries are normal
Click to expand...
Click to collapse
I tried like that. I flash firmware.zip which at topic which show me link and result isn't change. Then i flash firmware.zip inside OTA.zip but still red triangle.
Haha, my phone is special or am i wrong at any step?
But if s-off, relock bootloader and cid tmous, are u sure that is ok means can update via OTA/
Sent from my HTC VLE_U using xda app-developers app

a_new_day1503 said:
I tried like that. I flash firmware.zip which at topic which show me link and result isn't change. Then i flash firmware.zip inside OTA.zip but still red triangle.
Haha, my phone is special or am i wrong at any step?
But if s-off, relock bootloader and cid tmous, are u sure that is ok means can update via OTA/
Sent from my HTC VLE_U using xda app-developers app
Click to expand...
Click to collapse
Yeah, okay to flash with CID other than SuperCID. With SuperCID it bricks the phone when you do an OTA update.
Bud, maybe try RUU, go full stock and then get this small update OTA. That will solve all the hassle.

khan.orak said:
Yeah, okay to flash with CID other than SuperCID. With SuperCID it bricks the phone when you do an OTA update.
Bud, maybe try RUU, go full stock and then get this small update OTA. That will solve all the hassle.
Click to expand...
Click to collapse
Thanks, i think it is only way for get newest update from tmobile.
Sent from my HTC VLE_U using xda app-developers app

khan.orak said:
Yeah, okay to flash with CID other than SuperCID. With SuperCID it bricks the phone when you do an OTA update.
Bud, maybe try RUU, go full stock and then get this small update OTA. That will solve all the hassle.
Click to expand...
Click to collapse
I dont need get RUU then get small update OTA, i get lastest RUU which after run it, dont need get any OTA update.
From now, if Tmobile or HTC release any OTA update, i am going to download newest RUU and run it instead of get update via OTA, that is so tired and waste time.

[Q] Please help phone has no OS

Okay so here is what happened i unlocked my bootloader and rooted my phone using the all in one toolkit, i tried to flash a custom ROM using the GooManager app. This is where things went wrong. After flashing the ROM my phone shut off and would only turn on to the HTC Quietly Brilliant page at the beginning of the boot cycle, i made a backup but dont know how to find it. I somehow managed to wipe the entire phone and now i have no operating system. I had TWRP installed but cannot access it because i relocked the phone. Is there anyway to get this thing working again? any help would be much appreciated
here is what my fastboot screen reads:
***TAMPERED***
***RELOCKED***
EVITA PVT SHIP S-ON RL
HBOOT- 2.14.0000
RADIO-0.24p.32.09.06
OpenDSP-v34.1.0.45.1219
eMMC-boot
Nov 26 2012,18:37:14:-1
FASTBOOT
<VOL UP> to previous item
<VOL DOWN> to next item
<POWER> to select item
BOOTLOADER
REBOOT
REBOOT BOOTLOADER
POWER DOWN

brenntard said:
Okay so here is what happened i unlocked my bootloader and rooted my phone using the all in one toolkit, i tried to flash a custom ROM using the GooManager app. This is where things went wrong. After flashing the ROM my phone shut off and would only turn on to the HTC Quietly Brilliant page at the beginning of the boot cycle, i made a backup but dont know how to find it. I somehow managed to wipe the entire phone and now i have no operating system. I had TWRP installed but cannot access it because i relocked the phone. Is there anyway to get this thing working again? any help would be much appreciated
here is what my fastboot screen reads:
***TAMPERED***
***RELOCKED***
EVITA PVT SHIP S-ON RL
HBOOT- 2.14.0000
RADIO-0.24p.32.09.06
OpenDSP-v34.1.0.45.1219
eMMC-boot
Nov 26 2012,18:37:14:-1
FASTBOOT
to previous item
to next item
to select item
BOOTLOADER
REBOOT
REBOOT BOOTLOADER
POWER DOWN
Click to expand...
Click to collapse
Since you are s-on, you need to fastboot flash boot boot.IMG from the ROM you want to use. While you're at it you may as well just s-off your device. It will make things simpler in the end. You're going to have to unlock the boot loader again to flash the boot image though. You will also want to flash recovery again via fastboot.
Sent from my One X using XDA Premium 4 mobile app

Black!Jack said:
Since you are s-on, you need to fastboot flash boot boot.IMG from the ROM you want to use. While you're at it you may as well just s-off your device. It will make things simpler in the end. You're going to have to unlock the boot loader again to flash the boot image though. You will also want to flash recovery again via fastboot.
Sent from my One X using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thank you so much for the response...i have a couple questions. I am fairly new to android and these are the first real problems i have run into that i havent been able to solve on my own. how do i "fastboot flash boot boot.IMG"? i just want to use the stock ROM or CM10 which ever will get my phone running again. I have unlocked to bootloader again and now have access to TWRP

brenntard said:
Thank you so much for the response...i have a couple questions. I am fairly new to android and these are the first real problems i have run into that i havent been able to solve on my own. how do i "fastboot flash boot boot.IMG"? i just want to use the stock ROM or CM10 which ever will get my phone running again. I have unlocked to bootloader again and now have access to TWRP
Click to expand...
Click to collapse
Take a look at this thread
http://forum.xda-developers.com/showthread.php?t=2136172
It will answer many of the questions that you have and provides links to appropriate tools.
You should definitely s-off your device now. Just look for the question in the thread I linked for more detail. Bookmark it as well, or add it to your favorites, as it will provide a great reference point for future use.
Once you have s-off, you will just have to flash any ROM you want from recovery. It will make your life way easier.
If someone helps you, just hit the thanks button, or thumbs up from the xda app.
Sent from my One X using XDA Premium 4 mobile app

Black!Jack said:
Take a look at this thread
http://forum.xda-developers.com/showthread.php?t=2136172
It will answer many of the questions that you have and provides links to appropriate tools.
You should definitely s-off your device now. Just look for the question in the thread I linked for more detail. Bookmark it as well, or add it to your favorites, as it will provide a great reference point for future use.
Once you have s-off, you will just have to flash any ROM you want from recovery. It will make your life way easier.
If someone helps you, just hit the thanks button, or thumbs up from the xda app.
Sent from my One X using XDA Premium 4 mobile app
Click to expand...
Click to collapse
In the rumrunner instructions to s-off my device it says i need to have fast boot unchecked in settings. I am pretty sure i have it checked but there is no way for me to tell for sure...since i dont have an OS installed is this an issue?

brenntard said:
In the rumrunner instructions to s-off my device it says i need to have fast boot unchecked in settings. I am pretty sure i have it checked but there is no way for me to tell for sure...since i dont have an OS installed is this an issue?
Click to expand...
Click to collapse
You need to get a ROM booting brute trying s-off. Don't use Goo Manager to install ROMs, install manually through TWRP recovery. Once you've installed the ROM reboot to the bootloader and flash the boot.img. Here's how to flash the boot.img.
Extract the boot.img from the ROM zip and copy it into your fastboot folder on your pc. After you've flashed the ROM and/or gapps, reboot to bootloader and connect your phone, make sure it says fastboot on your phone screen. Then you can issue the following command:
Code:
fastboot flash boot boot.img
Now you can reboot your phone into the ROM.
Sent from my Evita.

timmaaa said:
You need to get a ROM booting brute trying s-off. Don't use Goo Manager to install ROMs, install manually through TWRP recovery. Once you've installed the ROM reboot to the bootloader and flash the boot.img. Here's how to flash the boot.img.
Extract the boot.img from the ROM zip and copy it into your fastboot folder on your pc. After you've flashed the ROM and/or gapps, reboot to bootloader and connect your phone, make sure it says fastboot on your phone screen. Then you can issue the following command:
Code:
fastboot flash boot boot.img
Now you can reboot your phone into the ROM.
Sent from my Evita.
Click to expand...
Click to collapse
Okay I was able to flash the boot.img but can't figure out how to flash the rom.. Should I do it through recovery? Or through a fast boot command prompt like the one used to flash the boot.img

timmaaa said:
You need to get a ROM booting brute trying s-off. Don't use Goo Manager to install ROMs, install manually through TWRP recovery. Once you've installed the ROM reboot to the bootloader and flash the boot.img. Here's how to flash the boot.img.
Extract the boot.img from the ROM zip and copy it into your fastboot folder on your pc. After you've flashed the ROM and/or gapps, reboot to bootloader and connect your phone, make sure it says fastboot on your phone screen. Then you can issue the following command:
Code:
fastboot flash boot boot.img
Now you can reboot your phone into the ROM.
Sent from my Evita.
Click to expand...
Click to collapse
This may go with out saying but when I'm in recovery and hit the reboot button and try to select "system" it comes up with a message telling me I have no OS installed and asks if I want to continue anyway..

Use the wipe menu in TWRP to do a full wipe (cache/dalvik/factory reset/system). Then use the install option to the install the ROM (and gapps if it's an aosp ROM). Then reboot to bootloader and flash the boot.img with fastboot. Then reboot your phone.
Sent from my Evita.

timmaaa said:
Use the wipe menu in TWRP to do a full wipe (cache/dalvik/factory reset/system). Then use the install option to the install the ROM (and gapps if it's an aosp ROM). Then reboot to bootloader and flash the boot.img with fastboot. Then reboot your phone.
Sent from my Evita.
Click to expand...
Click to collapse
How do i get the ROM onto my phone? that might be a stupid question but i am stumped

brenntard said:
How do i get the ROM onto my phone? that might be a stupid question but i am stumped
Click to expand...
Click to collapse
Mount your sdcard through TWRP. You should then be able to drag and drop the file from your computer to your sdcard. It should go without saying that your phone needs to be connected to your computer.
Sent from my One X using XDA Premium 4 mobile app

Black!Jack said:
Mount your sdcard through TWRP. You should then be able to drag and drop the file from your computer to your sdcard. It should go without saying that your phone needs to be connected to your computer.
Sent from my One X using XDA Premium 4 mobile app
Click to expand...
Click to collapse
i cant mount my sd card, i can put a little x by cache data and system but not sd card...

timmaaa said:
Use the wipe menu in TWRP to do a full wipe (cache/dalvik/factory reset/system). Then use the install option to the install the ROM (and gapps if it's an aosp ROM). Then reboot to bootloader and flash the boot.img with fastboot. Then reboot your phone.
Sent from my Evita.
Click to expand...
Click to collapse
i was unable to do a wipe of my phone. in twrp i went to wipe and "swipe to factory reset" it ran through and came back as failed..

Try to format your sd then (from recovery)
Gesendet von meinem Xperia Neo V mit Tapatalk 2

What ROM did you flash with Goo Manager?
You mount the sd card by going into the mount menu, then using the mount usb storage option.
Sent from my Evita.

Need for stock Rogers RUU or Recovery Zip

My HTC One X was bricked, and I need to restore it to Rogers Stock. However, I searched the entire XDA webstie + 50 pages on Google + 50 pages on other country's android site, I cant find any working download URL. Can someone please upload one RUU or Zip file for me, so I can restore my phone please?

If your phone is bricked an RUU isn't going to save it. Either way, you'll find all Evita RUUs here:
http://androidruu.com/?developer=Evita
Sent from my One XL using Tapatalk

timmaaa said:
If your phone is bricked an RUU isn't going to save it. Either way, you'll find all Evita RUUs here:
http://androidruu.com/?developer=Evita
Sent from my One XL using Tapatalk
Click to expand...
Click to collapse
The phone actually is soft brick, all I need to do is to flash it back to stock rom, so I can do a S-Off
I have this problem because I attempted to flash cyanogenmod without getting S-Off, thus it end up with black screen boot loop.
Any idea to solve it? I cant find any recovery zip that is working

I wouldn't ruu without S-off. Do you have supercid? If you do, you may brick. Best to boot to bootloader then recovery then flash a sense rom then s-off
Sent from my HTC One_M8 using xda app-developers app

voot566 said:
The phone actually is soft brick, all I need to do is to flash it back to stock rom, so I can do a S-Off
I have this problem because I attempted to flash cyanogenmod without getting S-Off, thus it end up with black screen boot loop.
Any idea to solve it? I cant find any recovery zip that is working
Click to expand...
Click to collapse
There's no such thing as a soft brick, a phone is either bricked or it isn't. Do as exad suggested and flash a Sense ROM then get s-off, then update your firmware (which is probably what was your actual problem).
Sent from my One XL using Tapatalk

exad said:
I wouldn't ruu without S-off. Do you have supercid? If you do, you may brick. Best to boot to bootloader then recovery then flash a sense rom then s-off
Sent from my HTC One_M8 using xda app-developers app
Click to expand...
Click to collapse
THat is another problem, there is no CID showed on the bootloader screen.
This is all happen after I get bootloader unlocked, and attempted to flash clockworkmod. It end up with boot loop with black screen, cant get into any system
What I can do right now is
1. boot into TWRP
2. Copy anyfile into phone through TWRP
3. flash zip through TWRP, but I cant find any rom that is working for my phone
4. fastboot usb with any command

voot566 said:
THat is another problem, there is no CID showed on the bootloader screen.
This is all happen after I get bootloader unlocked, and attempted to flash clockworkmod. It end up with boot loop with black screen, cant get into any system
What I can do right now is
1. boot into TWRP
2. Copy anyfile into phone through TWRP
3. flash zip through TWRP, but I cant find any rom that is working for my phone
4. fastboot usb with any command
Click to expand...
Click to collapse
The CID doesn't show on your bootloader screen unless you have s-off. What are your bootloader details? What recovery do you have installed? You can check your CID with this fastboot command:
Code:
fastboot oem readcid
Sent from my One XL using Tapatalk

timmaaa said:
There's no such thing as a soft brick, a phone is either bricked or it isn't. Do as exad suggested and flash a Sense ROM then get s-off, then update your firmware (which is probably what was your actual problem).
Sent from my One XL using Tapatalk
Click to expand...
Click to collapse
Yeah, I kind of know that I need to flash a sense rom, but I cant find any sense rom that is working on my phone.
Here is the info:
Model: PJ83100
Bootloader unlocked
EVITA PVT SHIP S-ON RL
HBOOT-2.14.0000
RADIO-0.23A. 32.09.29
OpenDSP-v31.1.0.45.0815
eMMC-boot
Nov 26 2012, 18:37:14:-1
This is exactly what showed on my screen, no CID
Which rom I should use?

voot566 said:
Yeah, I kind of know that I need to flash a sense rom, but I cant find any sense rom that is working on my phone.
Here is the info:
Model: PJ83100
Bootloader unlocked
EVITA PVT SHIP S-ON RL
HBOOT-2.14.0000
RADIO-0.23A. 32.09.29
OpenDSP-v31.1.0.45.0815
eMMC-boot
Nov 26 2012, 18:37:14:-1
This is exactly what showed on my screen, no CID
Which rom I should use?
Click to expand...
Click to collapse
The fact is you don't actually need s-off to flash cyanogenmod. You only need s-off to run the 3.18 RUU which updates your firmware, which you don't need to do because your firmware is fine. This brings me back to the other question you didn't answer: what recovery do you have installed?
Sent from my One XL using Tapatalk

timmaaa said:
The CID doesn't show on your bootloader screen unless you have s-off. What are your bootloader details? What recovery do you have installed? You can check your CID with this fastboot command:
Code:
fastboot oem readcid
Sent from my One XL using Tapatalk
Click to expand...
Click to collapse
I used the command
CID: BS_US001
My recovery is TWRP v2.6.3.0
THis is the only version that is working for me, I tried clockworkmod, and higher or lower version for TWRP, but I cant mount USB storage through any of those except 2.6.3.0

Recovery version please.
Sent from my One XL using Tapatalk

You just need to extract the boot.img from the rom you are flashing, put it in your adb/fastboot folder and then after flashing the rom.
fastboot flash boot boot.img
Then you will be able to boot it.
I suggest getting S-OFF using rumrunner so you don't need to take this step anymore. will also protect you in case you need to RUU.

exad said:
You just need to extract the boot.img from the rom you are flashing, put it in your adb/fastboot folder and then after flashing the rom.
fastboot flash boot boot.img
Then you will be able to boot it.
I suggest getting S-OFF using rumrunner so you don't need to take this step anymore. will also protect you in case you need to RUU.
Click to expand...
Click to collapse
But my question is, which rom I should flash????
I tried both serveral differnet rom, but they are all not working.
This is my phone: http://www.newegg.com/Product/Product.aspx?Item=N82E16875502142

voot566 said:
But my question is, which rom I should flash????
I tried both serveral differnet rom, but they are all not working.
This is my phone: http://www.newegg.com/Product/Product.aspx?Item=N82E16875502142
Click to expand...
Click to collapse
I know what phone you have. an evita. Says so in your bootloader
You need unofficial 2.6.3 from original android dev. if you want to flash cm as you need SE Linux support.
Any sense rom should work on official twrp 2.6.3
make sure you wipe system cache and dalvik cache prior to flashing.
This is what you should do to rule out every issue.
Download unofficial 2.6.3
Check the Md5 of your download
put it in your fastboot folder
fastboot erase cache
fastboot flash recovery unnoficialrecoveryfilename.img
select recovery in bootloader
wipe cache, dalvik, system in wipe, advanced wipe
then do a factory reset for safe measure
flash your rom
wipe cache and dalvik
reboot to bootloader
extract the boot.img from the rom put it in your fastboot folder
fastboot flash boot boot.img
fastboot reboot

U mean this?
http://forum.xda-developers.com/showthread.php?t=2558503

voot566 said:
U mean this?
http://forum.xda-developers.com/showthread.php?t=2558503
Click to expand...
Click to collapse
That's the one.

Qucik question, since i am just helping my friend to do it, he want to get cyanogenmod, any idea how to do it after ur method?

He already told you exactly how to do it. What are you asking?
Sent from my One XL using Tapatalk

http://forum.xda-developers.com/showthread.php?t=1655011
This rom okay?

I thought you wanted to put cyanogenmod onto the phone...
Sent from my One XL using Tapatalk