[Q] problem with cm10 not booting - LG Optimus 3D

when i flash cm10 with rom manager on p920 with cwm recovery (non touch) this happens
youtube(dot)com/watch?v=EbO6zCdJNEM
any help would be appreciated thanks in advance

Since you didn't specify anything that you tried , I'm gonna assume you did nothing.
First i'm gonna tell you what I did because it worked in my case.
You should start over.
First flash v21e with v21e baseband.
http://forum.xda-developers.com/showthread.php?t=1540163
Follow this guide to root and install recovery do not forget to update superuser and it's binary (recovery gets all funky and starts to blink if you don't)
Binary update is under the info tab in the app.
flash the recovery non-touch! This is the important bit. Standart clockwork recovery.
When you're done power off and hold volume down and 3d and press the power button till it vibrates.
Flash cm10's latest nightly and gapps.
It should boot.
If it doesn't boot or restarts after 2 mins or no cell reception , you have an incompatible baseband. V21e is problematic even with ICS so I flashed v21d and now it's all better.
if it's still causing problems try Bernie's files they are like garlic to a vampire or so I heard.
Sent from my LG-P920 using xda app-developers app

i was on v20e when i flashed cm10 i did almost everything formating data, wiping dalvik cache, factory reset but i couldn't get it to work and thanks to the reply but i saw on a friends sgsII that cm10 is still having bugs and ill wait 'till a stable version comes out thanks for the reply

amel95 said:
i was on v20e when i flashed cm10 i did almost everything formating data, wiping dalvik cache, factory reset but i couldn't get it to work and thanks to the reply but i saw on a friends sgsII that cm10 is still having bugs and ill wait 'till a stable version comes out thanks for the reply
Click to expand...
Click to collapse
Well it's the fastest ROM available for p920.
I only give credit when it's due.
It's almost stable now it's getting "daily" updates.
Just a small amount of bugs left.
It won't be long.
Sent from my LG-P920 using xda app-developers app

Related

[Q] Stuck on "Performing factory data reset"

I removed the ICS build and use ODIN to return back to stock build.
Still having some problem so i did a data reset. It keep getting stuck there and i already done it three times.
Any suggestions?
So you flashed GB stock.tar through Odin? Do you mean factory/data reset in clockwork recovery? Flashing back to stock should take away your root so you would have to flash CWM again, make a nandroid backup, and flash superuser zip again.
What problems where you having before and after the ICS build?
Explain a bit further exactly what you did.
I installed STOCK Tar using ODIN.
It is booting up fine except i keep getting errors like "android.process.acore" has stopped unexpectedly. Most of the android apps is not working, like phone, contacts, calendars, etc.
I try to do a factory reset and it keep stopping halfway and hangs.
Your going to have to flash the kj2 modem. I had the same problem. I saw that the ucalc4 was still there, its on its own partition so it doesn't get changed when you flash stock tar. What I did...
1. Flash cwm in Odin
2. Boot into cwm (do backup)
3. Flash kj2 modem (I did it twice)
4. Reboot
5. Check baseband (should be uckj2)
This made the FC's go away. It seemed to me that the stock tar doesn't like that baseband, I can't explain why though. Didn't make sense to me but I fixed it. Also I found the ICS leak doesn't like stock recovery. Fyi
Sent from my SAMSUNG-SGH-I727 using xda premium
Little bit lost here.
I already flash it twice using ODIN and using the uckj2 build.
jxl92182 said:
Little bit lost here.
I already flash it twice using ODIN and using the uckj2 build.
Click to expand...
Click to collapse
Build is one thing, baseband is different. When you flash stock your build will be uckj2, you say your on it. OK good. Now check your baseband, will probably still be the ICS baseband ucalc4, that is your modem. You need to flash the uckj2 modem in cwm. http://forum.xda-developers.com/showthread.php?p=20157930
Once you flash that your baseband will be uckj2. That should fix your fc's. Did for me. If not, you may need to try something else which I will explain if need be that will clean things up.
Sent from my SAMSUNG-SGH-I727 using xda premium
Already installed the radio twice.
Original Shipped AT&T Skyrocket Radio I727ATTKJ2 and RIL
using CWM and still giving me errors....
Currently my phone is showing this:
Basband
I727UCKJ2
Kernel
2.6.35.11
Build number
GINGERBREAD.UCKJ2
jxl92182 said:
Already installed the radio twice.
Original Shipped AT&T Skyrocket Radio I727ATTKJ2 and RIL
using CWM and still giving me errors....
Currently my phone is showing this:
Basband
I727UCKJ2
Kernel
2.6.35.11
Build number
GINGERBREAD.UCKJ2
Click to expand...
Click to collapse
OK. What you need to do then is clean things up. There are two ways that I use but I prefer #1.
1. Flash darkside superwipe in cwm. Do a battery pull. Go into Odin and flash k0nanes tar.
OR
2. Flash stock recovery. Wipe data/factory reset. Do a battery pull. Go into Odin and flash k0nanes tar.
Then you can cwm, root, flash anything you want.
Sent from my SAMSUNG-SGH-I727 using xda premium
Thanks a lot hcyplr29 and Presbycusis.
I use darkside's flash and then reload stock.
Everything is fine now.
Glad to hear that. I swear by darkside between ROMS.
Sent from my SAMSUNG-SGH-I727 using xda premium
jxl92182 said:
Thanks a lot hcyplr29 and Presbycusis.
I use darkside's flash and then reload stock.
Everything is fine now.
Click to expand...
Click to collapse
Yah....Darkside.Wipe is killer. Glad to hear your back in action. It is confusing at first getting OS version, kernel, and modem all strait. It is a good learning experience.
Sent from my SAMSUNG-SGH-I727 using xda premium
basically those fc's were becuz the partition table needs to be reset after flashing ics to go back to gb. Darkside does this.
hcyplr29 said:
OK. What you need to do then is clean things up. There are two ways that I use but I prefer #1.
1. Flash darkside superwipe in cwm. Do a battery pull. Go into Odin and flash k0nanes tar.
OR
2. Flash stock recovery. Wipe data/factory reset. Do a battery pull. Go into Odin and flash k0nanes tar.
Then you can cwm, root, flash anything you want.
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
please help. i installed ics and cwm then went back to gingerbread.
what i did was
-i used SGH-I727-UCKJ2-k0nane.tar to go back to GB
-after installing it i get FC.
-i installed recovery-clockwork-touch-5.8.1.3-hercules.tar
-after installing it i rebooted to CWM by pressing volume up & down buttons and power button.
-now i couldnt seem to navigate cwm 5.8.1.3. the screen keeps on blinking. when i press down it only gets on option #2 which is install zip. and when i press the power button to ok it doesnt do anything.
i wanted to flash darkside so to wipe everthing. but my cwm is not working.
pls help. i really appreciate all your response
thanks
agenthack said:
please help. i installed ics and cwm then went back to gingerbread.
what i did was
-i used SGH-I727-UCKJ2-k0nane.tar to go back to GB
-after installing it i get FC.
-i installed recovery-clockwork-touch-5.8.1.3-hercules.tar
-after installing it i rebooted to CWM by pressing volume up & down buttons and power button.
-now i couldnt seem to navigate cwm 5.8.1.3. the screen keeps on blinking. when i press down it only gets on option #2 which is install zip. and when i press the power button to ok it doesnt do anything.
i wanted to flash darkside so to wipe everthing. but my cwm is not working.
pls help. i really appreciate all your response
thanks
Click to expand...
Click to collapse
That's because it's touch recovery, you don't push any buttons. Lmao. Touch the screen to use it. Haha
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
hahahaha... woooooo.... that's a good one... well i installed a later version of the CWM.. i think it was 5.0.2.6 version.. is that ok to use? now i can use the up and down buttons... omg! now thats what i call D*mb @$$ hahahaha..my bad my bad
agenthack said:
hahahaha... woooooo.... that's a good one... well i installed a later version of the CWM.. i think it was 5.0.2.6 version.. is that ok to use? now i can use the up and down buttons... omg! now thats i call D*mb @$$ hahahaha..
Click to expand...
Click to collapse
I would just go back to 5.8. It's much better for me. Plus it works far better for ics builds. But yeah, you can use your buttons again for that old ass version you got now
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
ok thanks. i already installed back the latest cwm. now its working! just have 1 question. im trying to look for flash option but theres no option thats says flash. i wanna flash DARKSIDE.SUPER.WIPE.zip its on my sd card already.i tried to click on install zip and chose DARKSIDE.SUPER.WIPE.zip but it says process cant be done..can you please teach me how? sorry for my ignorance.
agenthack said:
ok thanks. i already installed back the latest cwm. now its working! just have 1 question. im trying to llok for flash option but it theres no option thats says flash. i wanna flash Flash DARKSIDE.SUPER.WIPE. its on my sd card already.i tried to click on install zip and chose Flash DARKSIDE.SUPER.WIPE but it says process cant be done..can you please teach me how? sorry for my ignorance.
Click to expand...
Click to collapse
install zip from ad card, then choose zip from sd card. Scroll down and click on the zip
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
got it! just did the darkside wipe...pulled the battery out after..then im flashing it now with odin SGH-I727-UCKJ2-k0nane...hope it works now with no FC and i hope i get my signal back...will update you inawhile..
thanks for your help..
agenthack said:
got it! just did the darkside wipe...pulled the battery out after..then im flashing it now with odin SGH-I727-UCKJ2-k0nane...hope it works now with no FC and i hope i get my signal back...will update you inawhile..
thanks for your help..
Click to expand...
Click to collapse
Don't use that tar. Use sammobile
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

Shutdown Restart Fix?

Anyone know of a fix for the freeze on power off or restart? Could'nt get flash from odin working. Flashed nandroid backup version then mhx backup version over it. I also cleared caches, delvik, and formatted. Still freezes on power off or restart. Lokking for a simple fix hopefully!!
quickboot from market, or 14 toggle mod for ics
14 toggle mod didn't work for me, but i did read that romracers kernel fixed this problem for some. I'm gonna give it a try when i get home
Sent from my SAMSUNG-SGH-I727 using XDA
Should've searched first. Sorry...Factory reset a few times and it'll start working or like above said 14 toggle mod and also holding power for 10 seconds does the trick. Ill stick with 14 toggle method until fully working CM9 Kang version is done over in T989 Section. Thanks guys! Close Thread!!
Just keep re-flashing till it works.
I've flashed four times. It worked two of the flashes, didn't work the other two flashes.
Cant shut down
I tried everything in this post. Still could not get it to work.. Restoring my original nandroid...
rushi.1986 said:
I tried everything in this post. Still could not get it to work.. Restoring my original nandroid...
Click to expand...
Click to collapse
Cool story
Darkside wipe then reflash the one click. I'm staying here till the bugs are worked out. It runs PERFECT. I'm having a flash hangover. I need a break. Had some close calls testing just about everything out there.
Sent from my SAMSUNG-SGH-I727 using xda premium
xcrazydx said:
Cool story
Click to expand...
Click to collapse
It gets cooler. Here is what I did.
Had working shutdown on ICS leak and a nandroid of the same.
Flashed mhx's deodexed ICS and had freez on shutdown
Did a nandroid restore to the original ICS leak but the shutdown issues persisted.
ODIN flashed stock (3e) recovery and did a factory reset.
ODIN flashed latest clockworkmod touch and wiped delvik, system, cache, and data.
Restored the original ICS nandroid and problem solved.
Did not try with mhx's ROM though.
Sent from my SAMSUNG-SGH-I727 using XDA
rushi.1986 said:
It gets cooler. Here is what I did.
Had working shutdown on ICS leak and a nandroid of the same.
Flashed mhx's deodexed ICS and had freez on shutdown
Did a nandroid restore to the original ICS leak but the shutdown issues persisted.
ODIN flashed stock (3e) recovery and did a factory reset.
ODIN flashed latest clockworkmod touch and wiped delvik, system, cache, and data.
Restored the original ICS nandroid and problem solved.
Did not try with mhx's ROM though.
Sent from my SAMSUNG-SGH-I727 using XDA
Click to expand...
Click to collapse
I wasn't aware that a 3e recovery TAR for ICS had been released? Did you flash the same 3e recovery that GB uses into the ICS leak?
scott14719 said:
I wasn't aware that a 3e recovery TAR for ICS had been released? Did you flash the same 3e recovery that GB uses into the ICS leak?
Click to expand...
Click to collapse
Yes I flashed the GB 3e recovery.
Sent from my SAMSUNG-SGH-I727 using XDA

[Q] boot loop... need help from devs of cm9 for i9003

I've used almost all the custom firmwares in my i9003 every singly Roms worked.
However, as soon as I flash the stock roms, i am stuck in the samsung boot animation.
Also, I wonder if this is for everyone or not but everytime i flash a new rom (Dhiru's ICS and RemICS) I have to press all the keys randomly (vol up/dwn, ok key / power key) for the complete boot. Once the boot is complete, there are no problems...
<yes, I searched for the fix reading many posts... seems no one faced the problem i am facing :/>
what do u mean' press buttons randomly???'while switching from cm9 to stock wipe cache n dalvik
Cache
Cheers
Swyped from my RemICS powered sl
loneagl said:
what do u mean' press buttons randomly???'while switching from cm9 to stock wipe cache n dalvik
Cache
Cheers
Swyped from my RemICS powered sl
Click to expand...
Click to collapse
switching from any Roms not just cm9
I used MIUI (GB) for a while... missed some of the features of the stock ROM so flashed the stock rom...
Now I use RemICS...
Saw the new value pack update and tried flashing XXKPE, no luck. then I did the procedure 2-3 times (everytime stuck in bootloop)
and then flashed DDLF2, no luck on this one too...
Flashing CF-Root and i'll try wiping cache and dalvik, will share what happens
if not going to RemICS
PS i really need a bug free OS for at least a month which is why i am crying for help
loneagl said:
what do u mean' press buttons randomly???
Click to expand...
Click to collapse
pressing buttons randomly means, I rage-press vol up/down, ok key and power key... i don't hold but just click it all... This is the only way i can get my custom Roms to install :/
c3phus said:
pressing buttons randomly means, I rage-press vol up/down, ok key and power key... i don't hold but just click it all... This is the only way i can get my custom Roms to install :/
Click to expand...
Click to collapse
Didn't make sense..how can pressing buttons randomly help boot a device??? Can any dev help here?
Swyped from my RemICS powered sl
Firstly pal, you need to CALM down and think of the most appropriate terms for your problem, you mean you can switch roms before with no problems right? Then now your in boot loop? Maybe you failed to flash the stock roms. If going to xxkpq first flash xxkpe latona.pit then after that other file of xxkpe then xxkpq. Then start experimenting but make sure you wipe caches and dalvik cache,
loneagl said:
Didn't make sense..how can pressing buttons randomly help boot a device??? Can any dev help here?
Swyped from my RemICS powered sl
Click to expand...
Click to collapse
One reason I asked for dev's help :/
Else I would get stuck in bootloop and the random keypress seemed to help...
marshygeek said:
Firstly pal, you need to CALM down and think of the most appropriate terms for your problem, you mean you can switch roms before with no problems right? Then now your in boot loop? Maybe you failed to flash the stock roms. If going to xxkpq first flash xxkpe latona.pit then after that other file of xxkpe then xxkpq. Then start experimenting but make sure you wipe caches and dalvik cache,
Click to expand...
Click to collapse
I had xxkpq to begin with. Flashed to MIUI (GB, using CF-root), worked great so I used it for a while. Few weeks later a new post pops up Dhiru's ICS, I flashed it using CF-root. Got stuck in bootloop and was angry so pressed all the keys randomly, to my biggest surprise i got out of the boot loop and the installation was successful.
Then I tried going back to stock <kpe, kpq, kph and now ddlf2> and i got stuck in bootloop <random keypress does not work>. So I used MIUI for a while then went to Dhiru's ICS till alpha 7 and then used RemICS v1.3. RemICS v1.4 is too buggy for me and now I have no daily-use rom to go turn to.
c3phus said:
One reason I asked for dev's help :/
Else I would get stuck in bootloop and the random keypress seemed to help...
I had xxkpq to begin with. Flashed to MIUI (GB, using CF-root), worked great so I used it for a while. Few weeks later a new post pops up Dhiru's ICS, I flashed it using CF-root. Got stuck in bootloop and was angry so pressed all the keys randomly, to my biggest surprise i got out of the boot loop and the installation was successful.
Then I tried going back to stock <kpe, kpq, kph and now ddlf2> and i got stuck in bootloop <random keypress does not work>. So I used MIUI for a while then went to Dhiru's ICS till alpha 7 and then used RemICS v1.3. RemICS v1.4 is too buggy for me and now I have no daily-use rom to go turn to.
Click to expand...
Click to collapse
When you're in boot loop, try booting to recovery and factory resetting and wiping cache
Sent from my GT-I9003 using xda app-developers app
bscraze said:
When you're in boot loop, try booting to recovery and factory resetting and wiping cache
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
Yes. I've tried that... I just can't install the stock roms for some reason.
Btw i also realized that it's pressing power key and volume up/down that makes my ICS boot complete.
M on the RemICS at the moment. works fine but got problem with settings and wallpapers (i guess that is the Rom's bug but noone has reported yet :/)
c3phus said:
Yes. I've tried that... I just can't install the stock roms for some reason.
Btw i also realized that it's pressing power key and volume up/down that makes my ICS boot complete.
M on the RemICS at the moment. works fine but got problem with settings and wallpapers (i guess that is the Rom's bug but noone has reported yet :/)
Click to expand...
Click to collapse
After flashing stock roms u booted to recovery and factory resetted but still can't?
Sent from my GT-I9003 using xda app-developers app
bscraze said:
After flashing stock roms u booted to recovery and factory resetted but still can't?
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
for some reason i can't even access recovery <vol up + ok> when i flash with stock roms
100% Work!
Hi.
Flash this Chinese rom, with Odin 1.85.
latona_open_china_20101222_r01.pit---------------->PIT
I9003ZCKC1-REV08-ALL-low-CL961866------------>PDA
MODEM_I9003ZCKC1_REV_00_CL866730------->PHONE
I9003-CSC-MULTI-OZH961866------------------------->CSC
Enjoy.
100% Works for me.

[Q] Clean Rom 2.5 9/26 build. Stuck on bootscreen

Hi, this is my first post ever on XDA so sorry if im doing it wrong or if its in the wrong spot . anyways i am running stock and am on rooted & unlocked vzw gs3 . I downloaded and installed Scotty's Clean Rom 2.5 which was released just last week. I wiped/factory reset/ formatted everything and the rom seems to install fine, but then when i reboot it stays on the sgs3 boot screen forever? I dont know why it is not working. Ive tried about three times. Thanks.
slegger04 said:
Hi, this is my first post ever on XDA so sorry if im doing it wrong or if its in the wrong spot . anyways i am running stock and am on rooted & unlocked vzw gs3 . I downloaded and installed Scotty's Clean Rom 2.5 which was released just last week. I wiped/factory reset/ formatted everything and the rom seems to install fine, but then when i reboot it stays on the sgs3 boot screen forever? I dont know why it is not working. Ive tried about three times. Thanks.
Click to expand...
Click to collapse
I had the same problem with 2.1 and 2.5 on my phone. For some reason, the flash does not work on my phone the first time. both times I had to pull the battery when I got stuck on the boot screen then boot into recovery, re-wipe, fix permissions and reinstall. It always worked for me on the second try.
Good luck.
slegger04 said:
Hi, this is my first post ever on XDA so sorry if im doing it wrong or if its in the wrong spot . anyways i am running stock and am on rooted & unlocked vzw gs3 . I downloaded and installed Scotty's Clean Rom 2.5 which was released just last week. I wiped/factory reset/ formatted everything and the rom seems to install fine, but then when i reboot it stays on the sgs3 boot screen forever? I dont know why it is not working. Ive tried about three times. Thanks.
Click to expand...
Click to collapse
This happened to me once. Try to re-root the phone again then flash it.
Did you do a dalvick cache wipe too? Also were you flashing a kernel with 2.5? Are you coming from stock or a custom rom too? And if you are coming from a custom rom does it use a custom kernel? You should also check the md5 of the rom and verify it didnt get corrupt on download/transfer.
Sent from my SCH-I535 using xda app-developers app
RE
x714x said:
Did you do a dalvick cache wipe too? Also were you flashing a kernel with 2.5? Are you coming from stock or a custom rom too? And if you are coming from a custom rom does it use a custom kernel? You should also check the md5 of the rom and verify it didnt get corrupt on download/transfer.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Yes i wiped the dalvick, fixed permissions, formatted just about everything and factory reset, when that did not work I formatted and wiped everything before and after the flash. still no luck. I was not flashing a kernel, (to be honest im not even sure how to do that) and im coming from a stock rooted rom that i got when i first rooted with odin. I checked the md5 and everything matched up too.
How!?
rpuleo said:
This happened to me once. Try to re-root the phone again then flash it.
Click to expand...
Click to collapse
How do you re root? would i have to use odin to flash the rooted rom again?
The process of how you flashed sounds right.
When you say it's stuck forever, how much time did you give the phone to reboot. Sometimes with a new rom, it may take 5 min or longer for reboot to finish. If you haven't already, just walk away for 5-10 min before checking it.
Sent from a SYNERGIZED GalaxySIII
Clean rom wouldn't install for me on my phone... Weird stuff happened on the screen during boot animation and then would vibrate like crazy and go into boot loop... I came to realize that it was the kernel and I flashed lean kernel and it worked perfectly... I think these roms act differently on everyone's phones and sometimes there's no rhyme or reason to why things work for some people and not others... Just my. 02 cents
Sent from my SCH-I535 using xda app-developers app

[Q] Jellybam brick[NEED HELP]

HI, as in my previous thread i was telling that im going to try jellybam. Guess what i bricked my lg optimus 3d :good:
I went from cm7 to jellybam 4.1.0.
I Get lg boot logo for 1 minute then screen turns black (without backlight)
I can get in cwm but cant flash any other roms accept the jellybam again but this has no use.
Cant restore backup because my sdcard was lost so i had to put another in.
Can some one please please help me.
If you need any other info please ask me.
Thanx in advance
try to wipe all data and dalvik cache, and reinstall rom. HOPEFULLy you'll get on jellybam for a minute or two, and using usb connect put a stock rom onto your phone sd/internal card and hopefully you can install from there
tang097 said:
try to wipe all data and dalvik cache, and reinstall rom. HOPEFULLy you'll get on jellybam for a minute or two, and using usb connect put a stock rom onto your phone sd/internal card and hopefully you can install from there
Click to expand...
Click to collapse
I did all of that and i cant install any other rom it wont let it says cant open folder aborted.
http://forum.xda-developers.com/showthread.php?t=1540163
Back to stock u go. Or you can try and flash wkparks uboot and xloader, and see if that helps to load jellybam.
Sent from my LG-P920 using xda app-developers app
billy8362 said:
http://forum.xda-developers.com/showthread.php?t=1540163
Back to stock u go. Or you can try and flash wkparks uboot and xloader, and see if that helps to load jellybam.
Sent from my LG-P920 using xda app-developers app
Click to expand...
Click to collapse
Thanx fot the info. I putted my phone up for insurance haha im lazy hope they will get me a stock rom(heard a lot of people did this).
If not i will mosdeffenitly try this why. Thanx again.:good:

Categories

Resources