Database Info

[Q] Trying to install Bonsai4All RM Epic 4G plz HELP

I flashed to EB13 , rooted, put clockwork modded installed via clockwork Bonsai4All
but installation is stuck at Samsung screen and doesnt budge this is like my 12th time reflashing and trying to install this ROM..I think im bout to go back to ViperROM...

samMD said:
I flashed to EB13 , rooted, put clockwork modded installed via clockwork Bonsai4All
but installation is stuck at Samsung screen and doesnt budge this is like my 12th time reflashing and trying to install this ROM..I think im bout to go back to ViperROM...
Click to expand...
Click to collapse
I kno bonsai backs up and restores data, but if your having issues I would suggest odining to stock, wiping data three times, wiping cache, wiping dalvik then flashing bonsai over a fresh stock install.
Also I believe the latest bonsai is based on ec05, not eb13, in theory you should still be able to flash though, let me kno if u need a link to the stock ec05 tar
Sent from my SPH-D700 using XDA App

http://www.multiupload.com/YLWNL9GMCZ
Here is the link to odin to fully stock ec05..
Try odining to this, let it boot, use the clockwork mod 3.0.0.6 one click root, then boot into clockwork, wipe data three times, wipe cache, wipe dalvik. Then flash bonsai..
If you are still having issues I would reccomend trying syndicaterom using the same process, been on it for 2 weeks + without a single hickup.. good luck
Sent from my SPH-D700 using XDA App

[Q] Stuck on "Performing factory data reset"

I removed the ICS build and use ODIN to return back to stock build.
Still having some problem so i did a data reset. It keep getting stuck there and i already done it three times.
Any suggestions?

So you flashed GB stock.tar through Odin? Do you mean factory/data reset in clockwork recovery? Flashing back to stock should take away your root so you would have to flash CWM again, make a nandroid backup, and flash superuser zip again.
What problems where you having before and after the ICS build?
Explain a bit further exactly what you did.

I installed STOCK Tar using ODIN.
It is booting up fine except i keep getting errors like "android.process.acore" has stopped unexpectedly. Most of the android apps is not working, like phone, contacts, calendars, etc.
I try to do a factory reset and it keep stopping halfway and hangs.

Your going to have to flash the kj2 modem. I had the same problem. I saw that the ucalc4 was still there, its on its own partition so it doesn't get changed when you flash stock tar. What I did...
1. Flash cwm in Odin
2. Boot into cwm (do backup)
3. Flash kj2 modem (I did it twice)
4. Reboot
5. Check baseband (should be uckj2)
This made the FC's go away. It seemed to me that the stock tar doesn't like that baseband, I can't explain why though. Didn't make sense to me but I fixed it. Also I found the ICS leak doesn't like stock recovery. Fyi
Sent from my SAMSUNG-SGH-I727 using xda premium

Little bit lost here.
I already flash it twice using ODIN and using the uckj2 build.

jxl92182 said:
Little bit lost here.
I already flash it twice using ODIN and using the uckj2 build.
Click to expand...
Click to collapse
Build is one thing, baseband is different. When you flash stock your build will be uckj2, you say your on it. OK good. Now check your baseband, will probably still be the ICS baseband ucalc4, that is your modem. You need to flash the uckj2 modem in cwm. http://forum.xda-developers.com/showthread.php?p=20157930
Once you flash that your baseband will be uckj2. That should fix your fc's. Did for me. If not, you may need to try something else which I will explain if need be that will clean things up.
Sent from my SAMSUNG-SGH-I727 using xda premium

Already installed the radio twice.
Original Shipped AT&T Skyrocket Radio I727ATTKJ2 and RIL
using CWM and still giving me errors....
Currently my phone is showing this:
Basband
I727UCKJ2
Kernel
2.6.35.11
Build number
GINGERBREAD.UCKJ2

jxl92182 said:
Already installed the radio twice.
Original Shipped AT&T Skyrocket Radio I727ATTKJ2 and RIL
using CWM and still giving me errors....
Currently my phone is showing this:
Basband
I727UCKJ2
Kernel
2.6.35.11
Build number
GINGERBREAD.UCKJ2
Click to expand...
Click to collapse
OK. What you need to do then is clean things up. There are two ways that I use but I prefer #1.
1. Flash darkside superwipe in cwm. Do a battery pull. Go into Odin and flash k0nanes tar.
OR
2. Flash stock recovery. Wipe data/factory reset. Do a battery pull. Go into Odin and flash k0nanes tar.
Then you can cwm, root, flash anything you want.
Sent from my SAMSUNG-SGH-I727 using xda premium

Thanks a lot hcyplr29 and Presbycusis.
I use darkside's flash and then reload stock.
Everything is fine now.

Glad to hear that. I swear by darkside between ROMS.
Sent from my SAMSUNG-SGH-I727 using xda premium

jxl92182 said:
Thanks a lot hcyplr29 and Presbycusis.
I use darkside's flash and then reload stock.
Everything is fine now.
Click to expand...
Click to collapse
Yah....Darkside.Wipe is killer. Glad to hear your back in action. It is confusing at first getting OS version, kernel, and modem all strait. It is a good learning experience.
Sent from my SAMSUNG-SGH-I727 using xda premium

basically those fc's were becuz the partition table needs to be reset after flashing ics to go back to gb. Darkside does this.

hcyplr29 said:
OK. What you need to do then is clean things up. There are two ways that I use but I prefer #1.
1. Flash darkside superwipe in cwm. Do a battery pull. Go into Odin and flash k0nanes tar.
OR
2. Flash stock recovery. Wipe data/factory reset. Do a battery pull. Go into Odin and flash k0nanes tar.
Then you can cwm, root, flash anything you want.
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
please help. i installed ics and cwm then went back to gingerbread.
what i did was
-i used SGH-I727-UCKJ2-k0nane.tar to go back to GB
-after installing it i get FC.
-i installed recovery-clockwork-touch-5.8.1.3-hercules.tar
-after installing it i rebooted to CWM by pressing volume up & down buttons and power button.
-now i couldnt seem to navigate cwm 5.8.1.3. the screen keeps on blinking. when i press down it only gets on option #2 which is install zip. and when i press the power button to ok it doesnt do anything.
i wanted to flash darkside so to wipe everthing. but my cwm is not working.
pls help. i really appreciate all your response
thanks

agenthack said:
please help. i installed ics and cwm then went back to gingerbread.
what i did was
-i used SGH-I727-UCKJ2-k0nane.tar to go back to GB
-after installing it i get FC.
-i installed recovery-clockwork-touch-5.8.1.3-hercules.tar
-after installing it i rebooted to CWM by pressing volume up & down buttons and power button.
-now i couldnt seem to navigate cwm 5.8.1.3. the screen keeps on blinking. when i press down it only gets on option #2 which is install zip. and when i press the power button to ok it doesnt do anything.
i wanted to flash darkside so to wipe everthing. but my cwm is not working.
pls help. i really appreciate all your response
thanks
Click to expand...
Click to collapse
That's because it's touch recovery, you don't push any buttons. Lmao. Touch the screen to use it. Haha
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

hahahaha... woooooo.... that's a good one... well i installed a later version of the CWM.. i think it was 5.0.2.6 version.. is that ok to use? now i can use the up and down buttons... omg! now thats what i call D*mb @$$ hahahaha..my bad my bad

agenthack said:
hahahaha... woooooo.... that's a good one... well i installed a later version of the CWM.. i think it was 5.0.2.6 version.. is that ok to use? now i can use the up and down buttons... omg! now thats i call D*mb @$$ hahahaha..
Click to expand...
Click to collapse
I would just go back to 5.8. It's much better for me. Plus it works far better for ics builds. But yeah, you can use your buttons again for that old ass version you got now
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

ok thanks. i already installed back the latest cwm. now its working! just have 1 question. im trying to look for flash option but theres no option thats says flash. i wanna flash DARKSIDE.SUPER.WIPE.zip its on my sd card already.i tried to click on install zip and chose DARKSIDE.SUPER.WIPE.zip but it says process cant be done..can you please teach me how? sorry for my ignorance.

agenthack said:
ok thanks. i already installed back the latest cwm. now its working! just have 1 question. im trying to llok for flash option but it theres no option thats says flash. i wanna flash Flash DARKSIDE.SUPER.WIPE. its on my sd card already.i tried to click on install zip and chose Flash DARKSIDE.SUPER.WIPE but it says process cant be done..can you please teach me how? sorry for my ignorance.
Click to expand...
Click to collapse
install zip from ad card, then choose zip from sd card. Scroll down and click on the zip
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

got it! just did the darkside wipe...pulled the battery out after..then im flashing it now with odin SGH-I727-UCKJ2-k0nane...hope it works now with no FC and i hope i get my signal back...will update you inawhile..
thanks for your help..

agenthack said:
got it! just did the darkside wipe...pulled the battery out after..then im flashing it now with odin SGH-I727-UCKJ2-k0nane...hope it works now with no FC and i hope i get my signal back...will update you inawhile..
thanks for your help..
Click to expand...
Click to collapse
Don't use that tar. Use sammobile
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

[ROM] ICS Stock Rooted Full Bloat (AT&T OR ROGERS)

ATT-ICS-STOCK-FULL BLOAT /w ROOT
MADE FROM dd SYSTEM.img DUMPS NOT FROM NANDROID BACKUPS
:::::::::::::::::::::::::::::: Features ::::::::::::::::::::::::::::::
Android ICS 4.0.3
AT&T UCLA4 Base Files from ODIN Leak
Stock Kernel 3.0.8 unsecured -- thx romracer
Superuser/ Rooted
BusyBox installed
Rom Manager & Titanium Backup Preloaded
Deodexed and ZipAligned
Rom sym link Modem Fixes to ensure Modem Works on Rogers & AT&T
This is a FULL WIPE, Flash at your own risk & backup your data.
INSTALL HOW TO: (read step 10 first)
The only people who have a hard time flashing are Gingerbread users. Its hit or miss. I dont know what else to do. Most people who cant flash find that Darkside SuperWIPE fixes it and the ROM will flash! (DONT FORGET put on your sdcard before your WIPE)
Reboot to Recovery
Flash MODEM (ONLY IF YOUR ON GINGERBREAD)
Wipe Data/Factory Reset
Under "Mounts and Storage" Format /system
Under Advanced "Wipe Dalvic Cache"
Flash ROM
Flash KERNEL (ONLY IF YOUR ON GINGERBREAD)
Reboot- FIRST boot will take up to 5mins to start.
If you have any trouble with your home button not working or reboot/shutdown hangs, just pull battery and reboot.
If for any reason, you have trouble ROGERS or Gingerbread users, Repeat the install process 3 times. Sometimes the kernel doesnt want to flash with this ROM and its the main reason why there has been so many problems.
DOWNLOAD LINKS:
ULCA4 Modem/Radio
ROM: ICS-STOCK FULL BLOAT WITH ROOT
Romracer KERNEL

It works like a charm. Wait for the att boot screen, takes awhile. Enjoy guys! =]

Here it goes!!!!!! ICS development!!!!!!! Good job bud!

I'll try this tomorrow, going from mhx 3.1, and let you know how it goes. I probably won't be able to post until tomorrow night so if anyone else is brave enough, feel free to beat me to the punch.
Sent from my SAMSUNG-SGH-I727 using xda premium

Is there a difference between this rom and the recovery you have posted? Other then flashing wise?
Sent from my SAMSUNG-SGH-I727 using XDA

Just installed your recovery! But I am having issues with root not working properly, cant move files into /system/app so I might try this instead.

Just flashed this and it installed with no issues at all. Can't wait to start working on this since my first rom became null and void once ICS leaked lol Great work MHX and everyone else involved

Pulling 6500-6600 consistently on Antutu with this and romracers unsecure kernel. The real world performance is better than CM7 AND MHX Superlite I ran previously. Thanks again so much man.
Galaxy S2 Skyrocket - MHX Stock ICS 4.0.3 - Romracer ICS Kernel - UCALC4 Modem

I can confirm it works coming from stock Rogers to ICS so far no issues I run into any i will post have to leaven for work so i will be a few hours
I am finding that system ui is showing up in task manager not sure if this is normal it didn't in the nandroid back up
And this is new

Wipe Data/Factory Reset
Under Advanced "Wipe Dalvic Cache"
Under "Mounts and Storage" Format /system
Under "Mounts and Storage" Format /data
Click to expand...
Click to collapse
Can we use darksides wipe to do this?

Play keeps fc-ing on me =\

sparker366 said:
Can we use darksides wipe to do this?
Click to expand...
Click to collapse
It's quicker and easier to just do so through clockwork
Galaxy S2 Skyrocket - MHX Stock ICS 4.0.3 - Romracer ICS Kernel - UCALC4 Modem

I cannot get Wifi hotspot or USB tethering to work with this. Settings force closes everytime I try to initiate it.
Any help?

32dave said:
I can confirm it works coming from stock Rogers to ICS so far no issues I run into any i will post have to leaven for work so i will be a few hours
I am finding that system ui is showing up in task manager not sure if this is normal it didn't in the nandroid back up
And this is new
Click to expand...
Click to collapse
Yeah came with the new radio
Sent from my SAMSUNG-SGH-I727 using xda premium

norcalsfinest said:
It's quicker and easier to just do so through clockwork
Galaxy S2 Skyrocket - MHX Stock ICS 4.0.3 - Romracer ICS Kernel - UCALC4 Modem
Click to expand...
Click to collapse
I hazard a guess that its about the same. You are clicking 4 times with your way and 2 times with mine. I wipe dalvik first and then run darkside. Its pretty damn fast way to wipe phone. I will stick with it. Worked great when installing this.

This thing is smooth as silk. Anyone had the guts to try the 14 toggle mod? I'm pretty sure it won't work since its based off different firmware.
Sent from my SAMSUNG-SGH-I727 using Tapatalk

MikeySmikey said:
This thing is smooth as silk. Anyone had the guts to try the 14 toggle mod? I'm pretty sure it won't work since its based off different firmware.
Sent from my SAMSUNG-SGH-I727 using Tapatalk
Click to expand...
Click to collapse
I tried that on stock ics as its indicated that it can be applied. I borked the hell out of my phone lol. No nandroid so it was a fresh install to recover. I have since done nandroids and titbu's to avoid fresh installs.

Ok so i am back from work i have found a couple of issues i cannot restart the phone with quick reboot it just hangs and its a little laggy (i am guessing because of TW) and the camera seems to hang for a half a second not sure if this is normal as it did it on the nandroid back up as well

Any advantage to flashing this if I already have the mhx cwm backup installed?
Sent from my Kindle Fire using xda premium

Flashing from GB DID NOT work for me. It installed, but kept freezing at the boot screen then would shut off.

HELP ASAP!! CWM Boot Loop

I flashed EB 4.0.4 6/1, and I decided to go back to CM7..
Now no matter what I flash, I keep getting rebooted back to the CWM.
Help guys?
*I tried reflashing CMW* Doesn't work
*Tried flashing stock recovery, than back to CWM* Does not work...
I can't think of anything else..
I even restore a CWM Backup of my Stock rom. Doesn't work :|
Right now I can install any rom perfectly, but I keep getting sent back to CWM when I reboot..

Try Dual nullifier from the Dev.

cricketAC said:
Try Dual nullifier from the Dev.
Click to expand...
Click to collapse
Tried that too. Doesn't work.

Take out battery then power on? Format system then install ROM and reboot?

http://forum.xda-developers.com/showthread.php?t=1248644
Do that and then reflash CWM.

Darn...someone beat me...oh well
http://forum.xda-developers.com/showthread.php?t=1685920
Sent from my LG-P999 using Tapatalk 2

Nope. Nothing works. :|

Fixed. Idk what happen. I ran dual nullifier like 10times before it gave me any reaction. :|

[Q] Clean Rom 2.5 9/26 build. Stuck on bootscreen

Hi, this is my first post ever on XDA so sorry if im doing it wrong or if its in the wrong spot . anyways i am running stock and am on rooted & unlocked vzw gs3 . I downloaded and installed Scotty's Clean Rom 2.5 which was released just last week. I wiped/factory reset/ formatted everything and the rom seems to install fine, but then when i reboot it stays on the sgs3 boot screen forever? I dont know why it is not working. Ive tried about three times. Thanks.

slegger04 said:
Hi, this is my first post ever on XDA so sorry if im doing it wrong or if its in the wrong spot . anyways i am running stock and am on rooted & unlocked vzw gs3 . I downloaded and installed Scotty's Clean Rom 2.5 which was released just last week. I wiped/factory reset/ formatted everything and the rom seems to install fine, but then when i reboot it stays on the sgs3 boot screen forever? I dont know why it is not working. Ive tried about three times. Thanks.
Click to expand...
Click to collapse
I had the same problem with 2.1 and 2.5 on my phone. For some reason, the flash does not work on my phone the first time. both times I had to pull the battery when I got stuck on the boot screen then boot into recovery, re-wipe, fix permissions and reinstall. It always worked for me on the second try.
Good luck.

slegger04 said:
Hi, this is my first post ever on XDA so sorry if im doing it wrong or if its in the wrong spot . anyways i am running stock and am on rooted & unlocked vzw gs3 . I downloaded and installed Scotty's Clean Rom 2.5 which was released just last week. I wiped/factory reset/ formatted everything and the rom seems to install fine, but then when i reboot it stays on the sgs3 boot screen forever? I dont know why it is not working. Ive tried about three times. Thanks.
Click to expand...
Click to collapse
This happened to me once. Try to re-root the phone again then flash it.

Did you do a dalvick cache wipe too? Also were you flashing a kernel with 2.5? Are you coming from stock or a custom rom too? And if you are coming from a custom rom does it use a custom kernel? You should also check the md5 of the rom and verify it didnt get corrupt on download/transfer.
Sent from my SCH-I535 using xda app-developers app

RE
x714x said:
Did you do a dalvick cache wipe too? Also were you flashing a kernel with 2.5? Are you coming from stock or a custom rom too? And if you are coming from a custom rom does it use a custom kernel? You should also check the md5 of the rom and verify it didnt get corrupt on download/transfer.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Yes i wiped the dalvick, fixed permissions, formatted just about everything and factory reset, when that did not work I formatted and wiped everything before and after the flash. still no luck. I was not flashing a kernel, (to be honest im not even sure how to do that) and im coming from a stock rooted rom that i got when i first rooted with odin. I checked the md5 and everything matched up too.

How!?
rpuleo said:
This happened to me once. Try to re-root the phone again then flash it.
Click to expand...
Click to collapse
How do you re root? would i have to use odin to flash the rooted rom again?

The process of how you flashed sounds right.
When you say it's stuck forever, how much time did you give the phone to reboot. Sometimes with a new rom, it may take 5 min or longer for reboot to finish. If you haven't already, just walk away for 5-10 min before checking it.
Sent from a SYNERGIZED GalaxySIII

Clean rom wouldn't install for me on my phone... Weird stuff happened on the screen during boot animation and then would vibrate like crazy and go into boot loop... I came to realize that it was the kernel and I flashed lean kernel and it worked perfectly... I think these roms act differently on everyone's phones and sometimes there's no rhyme or reason to why things work for some people and not others... Just my. 02 cents
Sent from my SCH-I535 using xda app-developers app