Database Info

[Q] Stuck on "Performing factory data reset"

I removed the ICS build and use ODIN to return back to stock build.
Still having some problem so i did a data reset. It keep getting stuck there and i already done it three times.
Any suggestions?

So you flashed GB stock.tar through Odin? Do you mean factory/data reset in clockwork recovery? Flashing back to stock should take away your root so you would have to flash CWM again, make a nandroid backup, and flash superuser zip again.
What problems where you having before and after the ICS build?
Explain a bit further exactly what you did.

I installed STOCK Tar using ODIN.
It is booting up fine except i keep getting errors like "android.process.acore" has stopped unexpectedly. Most of the android apps is not working, like phone, contacts, calendars, etc.
I try to do a factory reset and it keep stopping halfway and hangs.

Your going to have to flash the kj2 modem. I had the same problem. I saw that the ucalc4 was still there, its on its own partition so it doesn't get changed when you flash stock tar. What I did...
1. Flash cwm in Odin
2. Boot into cwm (do backup)
3. Flash kj2 modem (I did it twice)
4. Reboot
5. Check baseband (should be uckj2)
This made the FC's go away. It seemed to me that the stock tar doesn't like that baseband, I can't explain why though. Didn't make sense to me but I fixed it. Also I found the ICS leak doesn't like stock recovery. Fyi
Sent from my SAMSUNG-SGH-I727 using xda premium

Little bit lost here.
I already flash it twice using ODIN and using the uckj2 build.

jxl92182 said:
Little bit lost here.
I already flash it twice using ODIN and using the uckj2 build.
Click to expand...
Click to collapse
Build is one thing, baseband is different. When you flash stock your build will be uckj2, you say your on it. OK good. Now check your baseband, will probably still be the ICS baseband ucalc4, that is your modem. You need to flash the uckj2 modem in cwm. http://forum.xda-developers.com/showthread.php?p=20157930
Once you flash that your baseband will be uckj2. That should fix your fc's. Did for me. If not, you may need to try something else which I will explain if need be that will clean things up.
Sent from my SAMSUNG-SGH-I727 using xda premium

Already installed the radio twice.
Original Shipped AT&T Skyrocket Radio I727ATTKJ2 and RIL
using CWM and still giving me errors....
Currently my phone is showing this:
Basband
I727UCKJ2
Kernel
2.6.35.11
Build number
GINGERBREAD.UCKJ2

jxl92182 said:
Already installed the radio twice.
Original Shipped AT&T Skyrocket Radio I727ATTKJ2 and RIL
using CWM and still giving me errors....
Currently my phone is showing this:
Basband
I727UCKJ2
Kernel
2.6.35.11
Build number
GINGERBREAD.UCKJ2
Click to expand...
Click to collapse
OK. What you need to do then is clean things up. There are two ways that I use but I prefer #1.
1. Flash darkside superwipe in cwm. Do a battery pull. Go into Odin and flash k0nanes tar.
OR
2. Flash stock recovery. Wipe data/factory reset. Do a battery pull. Go into Odin and flash k0nanes tar.
Then you can cwm, root, flash anything you want.
Sent from my SAMSUNG-SGH-I727 using xda premium

Thanks a lot hcyplr29 and Presbycusis.
I use darkside's flash and then reload stock.
Everything is fine now.

Glad to hear that. I swear by darkside between ROMS.
Sent from my SAMSUNG-SGH-I727 using xda premium

jxl92182 said:
Thanks a lot hcyplr29 and Presbycusis.
I use darkside's flash and then reload stock.
Everything is fine now.
Click to expand...
Click to collapse
Yah....Darkside.Wipe is killer. Glad to hear your back in action. It is confusing at first getting OS version, kernel, and modem all strait. It is a good learning experience.
Sent from my SAMSUNG-SGH-I727 using xda premium

basically those fc's were becuz the partition table needs to be reset after flashing ics to go back to gb. Darkside does this.

hcyplr29 said:
OK. What you need to do then is clean things up. There are two ways that I use but I prefer #1.
1. Flash darkside superwipe in cwm. Do a battery pull. Go into Odin and flash k0nanes tar.
OR
2. Flash stock recovery. Wipe data/factory reset. Do a battery pull. Go into Odin and flash k0nanes tar.
Then you can cwm, root, flash anything you want.
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
please help. i installed ics and cwm then went back to gingerbread.
what i did was
-i used SGH-I727-UCKJ2-k0nane.tar to go back to GB
-after installing it i get FC.
-i installed recovery-clockwork-touch-5.8.1.3-hercules.tar
-after installing it i rebooted to CWM by pressing volume up & down buttons and power button.
-now i couldnt seem to navigate cwm 5.8.1.3. the screen keeps on blinking. when i press down it only gets on option #2 which is install zip. and when i press the power button to ok it doesnt do anything.
i wanted to flash darkside so to wipe everthing. but my cwm is not working.
pls help. i really appreciate all your response
thanks

agenthack said:
please help. i installed ics and cwm then went back to gingerbread.
what i did was
-i used SGH-I727-UCKJ2-k0nane.tar to go back to GB
-after installing it i get FC.
-i installed recovery-clockwork-touch-5.8.1.3-hercules.tar
-after installing it i rebooted to CWM by pressing volume up & down buttons and power button.
-now i couldnt seem to navigate cwm 5.8.1.3. the screen keeps on blinking. when i press down it only gets on option #2 which is install zip. and when i press the power button to ok it doesnt do anything.
i wanted to flash darkside so to wipe everthing. but my cwm is not working.
pls help. i really appreciate all your response
thanks
Click to expand...
Click to collapse
That's because it's touch recovery, you don't push any buttons. Lmao. Touch the screen to use it. Haha
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

hahahaha... woooooo.... that's a good one... well i installed a later version of the CWM.. i think it was 5.0.2.6 version.. is that ok to use? now i can use the up and down buttons... omg! now thats what i call D*mb @$$ hahahaha..my bad my bad

agenthack said:
hahahaha... woooooo.... that's a good one... well i installed a later version of the CWM.. i think it was 5.0.2.6 version.. is that ok to use? now i can use the up and down buttons... omg! now thats i call D*mb @$$ hahahaha..
Click to expand...
Click to collapse
I would just go back to 5.8. It's much better for me. Plus it works far better for ics builds. But yeah, you can use your buttons again for that old ass version you got now
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

ok thanks. i already installed back the latest cwm. now its working! just have 1 question. im trying to look for flash option but theres no option thats says flash. i wanna flash DARKSIDE.SUPER.WIPE.zip its on my sd card already.i tried to click on install zip and chose DARKSIDE.SUPER.WIPE.zip but it says process cant be done..can you please teach me how? sorry for my ignorance.

agenthack said:
ok thanks. i already installed back the latest cwm. now its working! just have 1 question. im trying to llok for flash option but it theres no option thats says flash. i wanna flash Flash DARKSIDE.SUPER.WIPE. its on my sd card already.i tried to click on install zip and chose Flash DARKSIDE.SUPER.WIPE but it says process cant be done..can you please teach me how? sorry for my ignorance.
Click to expand...
Click to collapse
install zip from ad card, then choose zip from sd card. Scroll down and click on the zip
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

got it! just did the darkside wipe...pulled the battery out after..then im flashing it now with odin SGH-I727-UCKJ2-k0nane...hope it works now with no FC and i hope i get my signal back...will update you inawhile..
thanks for your help..

agenthack said:
got it! just did the darkside wipe...pulled the battery out after..then im flashing it now with odin SGH-I727-UCKJ2-k0nane...hope it works now with no FC and i hope i get my signal back...will update you inawhile..
thanks for your help..
Click to expand...
Click to collapse
Don't use that tar. Use sammobile
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

Shutdown Restart Fix?

Anyone know of a fix for the freeze on power off or restart? Could'nt get flash from odin working. Flashed nandroid backup version then mhx backup version over it. I also cleared caches, delvik, and formatted. Still freezes on power off or restart. Lokking for a simple fix hopefully!!

quickboot from market, or 14 toggle mod for ics

14 toggle mod didn't work for me, but i did read that romracers kernel fixed this problem for some. I'm gonna give it a try when i get home
Sent from my SAMSUNG-SGH-I727 using XDA

Should've searched first. Sorry...Factory reset a few times and it'll start working or like above said 14 toggle mod and also holding power for 10 seconds does the trick. Ill stick with 14 toggle method until fully working CM9 Kang version is done over in T989 Section. Thanks guys! Close Thread!!

Just keep re-flashing till it works.
I've flashed four times. It worked two of the flashes, didn't work the other two flashes.

Cant shut down
I tried everything in this post. Still could not get it to work.. Restoring my original nandroid...

rushi.1986 said:
I tried everything in this post. Still could not get it to work.. Restoring my original nandroid...
Click to expand...
Click to collapse
Cool story

Darkside wipe then reflash the one click. I'm staying here till the bugs are worked out. It runs PERFECT. I'm having a flash hangover. I need a break. Had some close calls testing just about everything out there.
Sent from my SAMSUNG-SGH-I727 using xda premium

xcrazydx said:
Cool story
Click to expand...
Click to collapse
It gets cooler. Here is what I did.
Had working shutdown on ICS leak and a nandroid of the same.
Flashed mhx's deodexed ICS and had freez on shutdown
Did a nandroid restore to the original ICS leak but the shutdown issues persisted.
ODIN flashed stock (3e) recovery and did a factory reset.
ODIN flashed latest clockworkmod touch and wiped delvik, system, cache, and data.
Restored the original ICS nandroid and problem solved.
Did not try with mhx's ROM though.
Sent from my SAMSUNG-SGH-I727 using XDA

rushi.1986 said:
It gets cooler. Here is what I did.
Had working shutdown on ICS leak and a nandroid of the same.
Flashed mhx's deodexed ICS and had freez on shutdown
Did a nandroid restore to the original ICS leak but the shutdown issues persisted.
ODIN flashed stock (3e) recovery and did a factory reset.
ODIN flashed latest clockworkmod touch and wiped delvik, system, cache, and data.
Restored the original ICS nandroid and problem solved.
Did not try with mhx's ROM though.
Sent from my SAMSUNG-SGH-I727 using XDA
Click to expand...
Click to collapse
I wasn't aware that a 3e recovery TAR for ICS had been released? Did you flash the same 3e recovery that GB uses into the ICS leak?

scott14719 said:
I wasn't aware that a 3e recovery TAR for ICS had been released? Did you flash the same 3e recovery that GB uses into the ICS leak?
Click to expand...
Click to collapse
Yes I flashed the GB 3e recovery.
Sent from my SAMSUNG-SGH-I727 using XDA

[Q] I am stuck in a CWM boot loop.

Hello all, I need your help. Today I flashed a zip on a whim, and it has ruined my whole day.
I have managed to get back to CWM v2.5.1.3 RED, and can flash zips and clear cashes, all that. But when I reboot, it brings me right back to CWM. Any help for me? I am lost.
Thanks in advanced,
Nate
P.S. I am not afraid of the command line.

Try odin?

I have tried GTG Unbrick. That's how I've gotten as far as I have.
How long does it usually take? I'm staring at the Odin screen for about 5mins now and it still says "Set Partition" and "DO NOT TURN OFF TARGET!!"
Alright, FIXED, I just needed to keep retrying. It took like 5 attempts to get it going right.

Nate_the_Ace said:
Hello all, I need your help. Today I flashed a zip on a whim, and it has ruined my whole day.
I have managed to get back to CWM v2.5.1.3 RED, and can flash zips and clear cashes, all that. But when I reboot, it brings me right back to CWM. Any help for me? I am lost.
Thanks in advanced,
Nate
P.S. I am not afraid of the command line.
Click to expand...
Click to collapse
Have you tried....
http://forum.xda-developers.com/showthread.php?t=1524081
Sent from my SAMSUNG-SGH-I997 using Tapatalk 2 Beta-5

I am ALSO stuck in a CWM boot loop.
i have the same problem as well..
IF I were to guess what i did wrong it would be.. when i tinkered with the partitions
I tried Odin, Heimdall, and GTG unbrick link is not available anymore..

ummhii said:
i have the same problem as well..
IF I were to guess what i did wrong it would be.. when i tinkered with the partitions
I tried Odin, Heimdall, and GTG unbrick link is not available anymore..
Click to expand...
Click to collapse
bradman117 was kind enough to put together a thread with links to older Infuse roms and recovery options. One of his links should work. Just be sure to slap him a thanks.

... i am facing this problem and i have tried so many times that i am too pissed off to count. Tried Odin many times.
after odin back to UCLB3, phone works normally but when flashing cm9 from CWM Red phone boots to Blue CWM recovery again and wont boot no matter how many times i flash cm9. goes back to recovery everytime it boots. even tied 2 different builds of cm9. now its beyond my imagination so askin you people for help ...

chetansaraf said:
... i am facing this problem and i have tried so many times that i am too pissed off to count. Tried Odin many times.
after odin back to UCLB3, phone works normally but when flashing cm9 from CWM Red phone boots to Blue CWM recovery again and wont boot no matter how many times i flash cm9. goes back to recovery everytime it boots. even tied 2 different builds of cm9. now its beyond my imagination so askin you people for help ...
Click to expand...
Click to collapse
If you have flash the CM9 once you have now to mount the system and flash again the CM9....
Here take a look of this video this is not the CM9 but this is how you should flash any ics for the infuse..
https://www.youtube.com/watch?v=ndC39t1AE-k&feature=youtube_gdata_player
Sent from my SGH-I997 using XDA Premium 4 mobile app

alexischino said:
If you have flash the CM9 once you have now to mount the system and flash again the CM9....
Here take a look of this video this is not the CM9 but this is how you should flash any ics for the infuse..
https://www.youtube.com/watch?v=ndC39t1AE-k&feature=youtube_gdata_player
Sent from my SGH-I997 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
... thanx buddy for help but already running 4.3. i cant believe what i was missing. i was just rebooting the recovery where i needed to reboot the system after flashing cm9 1st time. and when i did, wowwww no problems and now phone runnin on 4.3. butterly smooth ...

HELP, Clockwork Recovery Loop!

I was trying to flash a eaglebloods ginger bread on my g2x... however every time the phone boots up it immediately goes into Clockworkmod Recovery and doesn't boot the OS. I've tried formatting and reinstalling the rom but i still get the same problem of the phone going directly into recovery instead of booting. Please help!

have you ever dropped the phone? Maybe the hardware button (volume down is stuck)is failing? I've never heard it automatically rebooting to recovery unless selected from the recovery to do so.

no i haven't dropped it or anything... the last thing i remember doing to the phone before it started doing this was clearing the cache and davilk cache...then it goes immediately to recovery...i just got the phone too, i hope i didn't brick it or something

you didn't "brick" it look up what that means in Urban Dictionary, before using it. If anything reflash the recovery with NVflasher or try a different rom.

tried reflashing clockwork and still have the same problem

tried a new rom? maybe use the clean up tool from in the dev section.

Re nvflash cwm. This has happened to me several times. Do not try to flash anything else until you nvflash cwm again. If that don't work use the rom for recovery in nvflash that is in the dev section.
Sent from my Galaxy Nexus using xda premium

kwes1020 said:
Re nvflash cwm. This has happened to me several times. Do not try to flash anything else until you nvflash cwm again. If that don't work use the rom for recovery in nvflash that is in the dev section.
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Two post above yours he said he re-nvlashed.
Sent from my LG-P999 using xda premium

Im going to try to reflash a different version of CWR and hope that works... crossing my fingers

MAN.... i flashed the latest touch cwm and still no luck... tried new rom (hellfires gb) no luck...!!! just got this phone man! any suggestions welcomed

Try using this NVFLASH technique. It should restore your ROM & recovery to stock.

mt3g said:
Two post above yours he said he re-nvlashed.
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
But the question is did any part of the flash fail. Just like flashing a rom. You can get bad flashes. Happens to me lots of times.
Bottom line flash the rom for recovery through nvflash and it will solve it. I've softbricked myself wayyyy too many times and got it back the same way. If it turns on and shows any graphic its not hard bricked.
andrewNY said:
Try using this NVFLASH technique. It should restore your ROM & recovery to stock.
Click to expand...
Click to collapse
This will resurrect it unless its not actually a g2x.
Sent from my Galaxy Nexus using xda premium

Thank you! this helped a lot!

andrewNY said:
Try using this NVFLASH technique. It should restore your ROM & recovery to stock.
Click to expand...
Click to collapse
you sir, are a gentleman and a scholar! THANK YOU!!!

djmeistro said:
no i haven't dropped it or anything... the last thing i remember doing to the phone before it started doing this was clearing the cache and davilk cache...then it goes immediately to recovery...i just got the phone too, i hope i didn't brick it or something
Click to expand...
Click to collapse
Make sure when you flash you wipe everything too, not just cache and dalvik cache
Sent from Narnia

[Q] Clean Rom 2.5 9/26 build. Stuck on bootscreen

Hi, this is my first post ever on XDA so sorry if im doing it wrong or if its in the wrong spot . anyways i am running stock and am on rooted & unlocked vzw gs3 . I downloaded and installed Scotty's Clean Rom 2.5 which was released just last week. I wiped/factory reset/ formatted everything and the rom seems to install fine, but then when i reboot it stays on the sgs3 boot screen forever? I dont know why it is not working. Ive tried about three times. Thanks.

slegger04 said:
Hi, this is my first post ever on XDA so sorry if im doing it wrong or if its in the wrong spot . anyways i am running stock and am on rooted & unlocked vzw gs3 . I downloaded and installed Scotty's Clean Rom 2.5 which was released just last week. I wiped/factory reset/ formatted everything and the rom seems to install fine, but then when i reboot it stays on the sgs3 boot screen forever? I dont know why it is not working. Ive tried about three times. Thanks.
Click to expand...
Click to collapse
I had the same problem with 2.1 and 2.5 on my phone. For some reason, the flash does not work on my phone the first time. both times I had to pull the battery when I got stuck on the boot screen then boot into recovery, re-wipe, fix permissions and reinstall. It always worked for me on the second try.
Good luck.

slegger04 said:
Hi, this is my first post ever on XDA so sorry if im doing it wrong or if its in the wrong spot . anyways i am running stock and am on rooted & unlocked vzw gs3 . I downloaded and installed Scotty's Clean Rom 2.5 which was released just last week. I wiped/factory reset/ formatted everything and the rom seems to install fine, but then when i reboot it stays on the sgs3 boot screen forever? I dont know why it is not working. Ive tried about three times. Thanks.
Click to expand...
Click to collapse
This happened to me once. Try to re-root the phone again then flash it.

Did you do a dalvick cache wipe too? Also were you flashing a kernel with 2.5? Are you coming from stock or a custom rom too? And if you are coming from a custom rom does it use a custom kernel? You should also check the md5 of the rom and verify it didnt get corrupt on download/transfer.
Sent from my SCH-I535 using xda app-developers app

RE
x714x said:
Did you do a dalvick cache wipe too? Also were you flashing a kernel with 2.5? Are you coming from stock or a custom rom too? And if you are coming from a custom rom does it use a custom kernel? You should also check the md5 of the rom and verify it didnt get corrupt on download/transfer.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Yes i wiped the dalvick, fixed permissions, formatted just about everything and factory reset, when that did not work I formatted and wiped everything before and after the flash. still no luck. I was not flashing a kernel, (to be honest im not even sure how to do that) and im coming from a stock rooted rom that i got when i first rooted with odin. I checked the md5 and everything matched up too.

How!?
rpuleo said:
This happened to me once. Try to re-root the phone again then flash it.
Click to expand...
Click to collapse
How do you re root? would i have to use odin to flash the rooted rom again?

The process of how you flashed sounds right.
When you say it's stuck forever, how much time did you give the phone to reboot. Sometimes with a new rom, it may take 5 min or longer for reboot to finish. If you haven't already, just walk away for 5-10 min before checking it.
Sent from a SYNERGIZED GalaxySIII

Clean rom wouldn't install for me on my phone... Weird stuff happened on the screen during boot animation and then would vibrate like crazy and go into boot loop... I came to realize that it was the kernel and I flashed lean kernel and it worked perfectly... I think these roms act differently on everyone's phones and sometimes there's no rhyme or reason to why things work for some people and not others... Just my. 02 cents
Sent from my SCH-I535 using xda app-developers app