I've used almost all the custom firmwares in my i9003 every singly Roms worked.
However, as soon as I flash the stock roms, i am stuck in the samsung boot animation.
Also, I wonder if this is for everyone or not but everytime i flash a new rom (Dhiru's ICS and RemICS) I have to press all the keys randomly (vol up/dwn, ok key / power key) for the complete boot. Once the boot is complete, there are no problems...
<yes, I searched for the fix reading many posts... seems no one faced the problem i am facing :/>
what do u mean' press buttons randomly???'while switching from cm9 to stock wipe cache n dalvik
Cache
Cheers
Swyped from my RemICS powered sl
loneagl said:
what do u mean' press buttons randomly???'while switching from cm9 to stock wipe cache n dalvik
Cache
Cheers
Swyped from my RemICS powered sl
Click to expand...
Click to collapse
switching from any Roms not just cm9
I used MIUI (GB) for a while... missed some of the features of the stock ROM so flashed the stock rom...
Now I use RemICS...
Saw the new value pack update and tried flashing XXKPE, no luck. then I did the procedure 2-3 times (everytime stuck in bootloop)
and then flashed DDLF2, no luck on this one too...
Flashing CF-Root and i'll try wiping cache and dalvik, will share what happens
if not going to RemICS
PS i really need a bug free OS for at least a month which is why i am crying for help
loneagl said:
what do u mean' press buttons randomly???
Click to expand...
Click to collapse
pressing buttons randomly means, I rage-press vol up/down, ok key and power key... i don't hold but just click it all... This is the only way i can get my custom Roms to install :/
c3phus said:
pressing buttons randomly means, I rage-press vol up/down, ok key and power key... i don't hold but just click it all... This is the only way i can get my custom Roms to install :/
Click to expand...
Click to collapse
Didn't make sense..how can pressing buttons randomly help boot a device??? Can any dev help here?
Swyped from my RemICS powered sl
Firstly pal, you need to CALM down and think of the most appropriate terms for your problem, you mean you can switch roms before with no problems right? Then now your in boot loop? Maybe you failed to flash the stock roms. If going to xxkpq first flash xxkpe latona.pit then after that other file of xxkpe then xxkpq. Then start experimenting but make sure you wipe caches and dalvik cache,
loneagl said:
Didn't make sense..how can pressing buttons randomly help boot a device??? Can any dev help here?
Swyped from my RemICS powered sl
Click to expand...
Click to collapse
One reason I asked for dev's help :/
Else I would get stuck in bootloop and the random keypress seemed to help...
marshygeek said:
Firstly pal, you need to CALM down and think of the most appropriate terms for your problem, you mean you can switch roms before with no problems right? Then now your in boot loop? Maybe you failed to flash the stock roms. If going to xxkpq first flash xxkpe latona.pit then after that other file of xxkpe then xxkpq. Then start experimenting but make sure you wipe caches and dalvik cache,
Click to expand...
Click to collapse
I had xxkpq to begin with. Flashed to MIUI (GB, using CF-root), worked great so I used it for a while. Few weeks later a new post pops up Dhiru's ICS, I flashed it using CF-root. Got stuck in bootloop and was angry so pressed all the keys randomly, to my biggest surprise i got out of the boot loop and the installation was successful.
Then I tried going back to stock <kpe, kpq, kph and now ddlf2> and i got stuck in bootloop <random keypress does not work>. So I used MIUI for a while then went to Dhiru's ICS till alpha 7 and then used RemICS v1.3. RemICS v1.4 is too buggy for me and now I have no daily-use rom to go turn to.
c3phus said:
One reason I asked for dev's help :/
Else I would get stuck in bootloop and the random keypress seemed to help...
I had xxkpq to begin with. Flashed to MIUI (GB, using CF-root), worked great so I used it for a while. Few weeks later a new post pops up Dhiru's ICS, I flashed it using CF-root. Got stuck in bootloop and was angry so pressed all the keys randomly, to my biggest surprise i got out of the boot loop and the installation was successful.
Then I tried going back to stock <kpe, kpq, kph and now ddlf2> and i got stuck in bootloop <random keypress does not work>. So I used MIUI for a while then went to Dhiru's ICS till alpha 7 and then used RemICS v1.3. RemICS v1.4 is too buggy for me and now I have no daily-use rom to go turn to.
Click to expand...
Click to collapse
When you're in boot loop, try booting to recovery and factory resetting and wiping cache
Sent from my GT-I9003 using xda app-developers app
bscraze said:
When you're in boot loop, try booting to recovery and factory resetting and wiping cache
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
Yes. I've tried that... I just can't install the stock roms for some reason.
Btw i also realized that it's pressing power key and volume up/down that makes my ICS boot complete.
M on the RemICS at the moment. works fine but got problem with settings and wallpapers (i guess that is the Rom's bug but noone has reported yet :/)
c3phus said:
Yes. I've tried that... I just can't install the stock roms for some reason.
Btw i also realized that it's pressing power key and volume up/down that makes my ICS boot complete.
M on the RemICS at the moment. works fine but got problem with settings and wallpapers (i guess that is the Rom's bug but noone has reported yet :/)
Click to expand...
Click to collapse
After flashing stock roms u booted to recovery and factory resetted but still can't?
Sent from my GT-I9003 using xda app-developers app
bscraze said:
After flashing stock roms u booted to recovery and factory resetted but still can't?
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
for some reason i can't even access recovery <vol up + ok> when i flash with stock roms
100% Work!
Hi.
Flash this Chinese rom, with Odin 1.85.
latona_open_china_20101222_r01.pit---------------->PIT
I9003ZCKC1-REV08-ALL-low-CL961866------------>PDA
MODEM_I9003ZCKC1_REV_00_CL866730------->PHONE
I9003-CSC-MULTI-OZH961866------------------------->CSC
Enjoy.
100% Works for me.
Related
Anyone know of a fix for the freeze on power off or restart? Could'nt get flash from odin working. Flashed nandroid backup version then mhx backup version over it. I also cleared caches, delvik, and formatted. Still freezes on power off or restart. Lokking for a simple fix hopefully!!
quickboot from market, or 14 toggle mod for ics
14 toggle mod didn't work for me, but i did read that romracers kernel fixed this problem for some. I'm gonna give it a try when i get home
Sent from my SAMSUNG-SGH-I727 using XDA
Should've searched first. Sorry...Factory reset a few times and it'll start working or like above said 14 toggle mod and also holding power for 10 seconds does the trick. Ill stick with 14 toggle method until fully working CM9 Kang version is done over in T989 Section. Thanks guys! Close Thread!!
Just keep re-flashing till it works.
I've flashed four times. It worked two of the flashes, didn't work the other two flashes.
Cant shut down
I tried everything in this post. Still could not get it to work.. Restoring my original nandroid...
rushi.1986 said:
I tried everything in this post. Still could not get it to work.. Restoring my original nandroid...
Click to expand...
Click to collapse
Cool story
Darkside wipe then reflash the one click. I'm staying here till the bugs are worked out. It runs PERFECT. I'm having a flash hangover. I need a break. Had some close calls testing just about everything out there.
Sent from my SAMSUNG-SGH-I727 using xda premium
xcrazydx said:
Cool story
Click to expand...
Click to collapse
It gets cooler. Here is what I did.
Had working shutdown on ICS leak and a nandroid of the same.
Flashed mhx's deodexed ICS and had freez on shutdown
Did a nandroid restore to the original ICS leak but the shutdown issues persisted.
ODIN flashed stock (3e) recovery and did a factory reset.
ODIN flashed latest clockworkmod touch and wiped delvik, system, cache, and data.
Restored the original ICS nandroid and problem solved.
Did not try with mhx's ROM though.
Sent from my SAMSUNG-SGH-I727 using XDA
rushi.1986 said:
It gets cooler. Here is what I did.
Had working shutdown on ICS leak and a nandroid of the same.
Flashed mhx's deodexed ICS and had freez on shutdown
Did a nandroid restore to the original ICS leak but the shutdown issues persisted.
ODIN flashed stock (3e) recovery and did a factory reset.
ODIN flashed latest clockworkmod touch and wiped delvik, system, cache, and data.
Restored the original ICS nandroid and problem solved.
Did not try with mhx's ROM though.
Sent from my SAMSUNG-SGH-I727 using XDA
Click to expand...
Click to collapse
I wasn't aware that a 3e recovery TAR for ICS had been released? Did you flash the same 3e recovery that GB uses into the ICS leak?
scott14719 said:
I wasn't aware that a 3e recovery TAR for ICS had been released? Did you flash the same 3e recovery that GB uses into the ICS leak?
Click to expand...
Click to collapse
Yes I flashed the GB 3e recovery.
Sent from my SAMSUNG-SGH-I727 using XDA
Hello all, I need your help. Today I flashed a zip on a whim, and it has ruined my whole day.
I have managed to get back to CWM v2.5.1.3 RED, and can flash zips and clear cashes, all that. But when I reboot, it brings me right back to CWM. Any help for me? I am lost.
Thanks in advanced,
Nate
P.S. I am not afraid of the command line.
Try odin?
I have tried GTG Unbrick. That's how I've gotten as far as I have.
How long does it usually take? I'm staring at the Odin screen for about 5mins now and it still says "Set Partition" and "DO NOT TURN OFF TARGET!!"
Alright, FIXED, I just needed to keep retrying. It took like 5 attempts to get it going right.
Nate_the_Ace said:
Hello all, I need your help. Today I flashed a zip on a whim, and it has ruined my whole day.
I have managed to get back to CWM v2.5.1.3 RED, and can flash zips and clear cashes, all that. But when I reboot, it brings me right back to CWM. Any help for me? I am lost.
Thanks in advanced,
Nate
P.S. I am not afraid of the command line.
Click to expand...
Click to collapse
Have you tried....
http://forum.xda-developers.com/showthread.php?t=1524081
Sent from my SAMSUNG-SGH-I997 using Tapatalk 2 Beta-5
I am ALSO stuck in a CWM boot loop.
i have the same problem as well..
IF I were to guess what i did wrong it would be.. when i tinkered with the partitions
I tried Odin, Heimdall, and GTG unbrick link is not available anymore..
ummhii said:
i have the same problem as well..
IF I were to guess what i did wrong it would be.. when i tinkered with the partitions
I tried Odin, Heimdall, and GTG unbrick link is not available anymore..
Click to expand...
Click to collapse
bradman117 was kind enough to put together a thread with links to older Infuse roms and recovery options. One of his links should work. Just be sure to slap him a thanks.
... i am facing this problem and i have tried so many times that i am too pissed off to count. Tried Odin many times.
after odin back to UCLB3, phone works normally but when flashing cm9 from CWM Red phone boots to Blue CWM recovery again and wont boot no matter how many times i flash cm9. goes back to recovery everytime it boots. even tied 2 different builds of cm9. now its beyond my imagination so askin you people for help ...
chetansaraf said:
... i am facing this problem and i have tried so many times that i am too pissed off to count. Tried Odin many times.
after odin back to UCLB3, phone works normally but when flashing cm9 from CWM Red phone boots to Blue CWM recovery again and wont boot no matter how many times i flash cm9. goes back to recovery everytime it boots. even tied 2 different builds of cm9. now its beyond my imagination so askin you people for help ...
Click to expand...
Click to collapse
If you have flash the CM9 once you have now to mount the system and flash again the CM9....
Here take a look of this video this is not the CM9 but this is how you should flash any ics for the infuse..
https://www.youtube.com/watch?v=ndC39t1AE-k&feature=youtube_gdata_player
Sent from my SGH-I997 using XDA Premium 4 mobile app
alexischino said:
If you have flash the CM9 once you have now to mount the system and flash again the CM9....
Here take a look of this video this is not the CM9 but this is how you should flash any ics for the infuse..
https://www.youtube.com/watch?v=ndC39t1AE-k&feature=youtube_gdata_player
Sent from my SGH-I997 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
... thanx buddy for help but already running 4.3. i cant believe what i was missing. i was just rebooting the recovery where i needed to reboot the system after flashing cm9 1st time. and when i did, wowwww no problems and now phone runnin on 4.3. butterly smooth ...
Hay guys. Please help me. Some days ago i flashed my phone with 4.0.4 by Kies and everything was ok but after some days using ICS i was totally disappointed from it and decide to back my perfectly working 2.3.6 (Ausrian rom) with which i was before. But now after flashing it with Odin my phone stays on the first screen (Choose lang.) and than some messages start to shows up saying some google services can't start and after some seconds the phone restarts and all repeats again. PLEASE HELP if it's possible! Thanks in advance!!
may be flashing problem/Download file may be having some problem, Try to download the Stock ROM and Flash it again with ODIN and check...
mj.vikram said:
may be flashing problem/Download file may be having some problem, Try to download the Stock ROM and Flash it again with ODIN and check...
Click to expand...
Click to collapse
Yes, i used the original Austria rom (3 Hutchinson) which i downloaded from sammobbile's stock rom section...
Marinski79 said:
Yes, i used the original Austria rom (3 Hutchinson) which i downloaded from sammobbile's stock rom section...
Click to expand...
Click to collapse
Check if you are able to Boot in to Recovery Mode, if possible then Wipe Data and reboot the system..
i m using frankstainmod ICS , can i flash cm 7.2 using cwm???
TUSHARKATE007 said:
i m using frankstainmod ICS , can i flash cm 7.2 using cwm???
Click to expand...
Click to collapse
Better you downgrade to GB and then flash CM 7 on it....
mj.vikram said:
Better you downgrade to GB and then flash CM 7 on it....
Click to expand...
Click to collapse
thanks
go to recovery mode
do a factory reset
cache wipe
You do not need to flash cwm.
use gb original recovery.
Sent from my GT-I9103 using xda app-developers app
---------- Post added at 12:56 AM ---------- Previous post was at 12:45 AM ----------
Or you can flash cwm.
Then u can recovery from the backup.
For my experience, I encouter the same things as u (downgrade to gb, can't bpot).
What I do is listed below:
1. power off phone.
2. power on phone and press home+volume up to enter one mode (I don't how to name it. Also, the mode is like cwm, but only few functon)
3. select factory reset. select cache……
4. then u can reboot to a clean gb systen
5. flash cwm via odin and recovery it to the backup I made before flash ics.
Sent from my GT-I9103 using xda app-developers app
mj.vikram said:
Check if you are able to Boot in to Recovery Mode, if possible then Wipe Data and reboot the system..
Click to expand...
Click to collapse
Yes, this worked! Thanks a lot dude!!! My biggest problem was that i didn't made a backup before flash to ICS... And i wasn't rooted my phone and installed CWM until now The second problem was that i wasn't able to start CWM after installing it. I tried 10 times maybe and when i was going to give up i get lucky and it starts (ufff.. Than i wipe data/cash and even did factory reset and after that my phone reborn DD
Thanks again for all answers and help guys
Marinski79 said:
Yes, this worked! Thanks a lot dude!!! My biggest problem was that i didn't made a backup before flash to ICS... And i wasn't rooted my phone and installed CWM until now The second problem was that i wasn't able to start CWM after installing it. I tried 10 times maybe and when i was going to give up i get lucky and it starts (ufff.. Than i wipe data/cash and even did factory reset and after that my phone reborn DD
Thanks again for all answers and help guys
Click to expand...
Click to collapse
Happy to help ,....
I was flashing different roms onto my I5801 to find which one would work best for me, but now my phone now can't boot. It boots directly into recovery every time. I've tried re-flashing the original roms but it doesn't seem to fix it. Any ideas on how i could get it to boot normally again? Thank you.
Flash through odin
Sent from my GT-I5800 using xda premium
I did, i tried using the original rom and a few custom ones available here, none booted, i just got a different looking recovery screen.
xduox said:
I did, i tried using the original rom and a few custom ones available here, none booted, i just got a different looking recovery screen.
Click to expand...
Click to collapse
Do you press REBOOT SYSTEM NOW
Hey.... don't forget to thank me!!!
You have to flash zerofill.tar first and tgen flash another rom
(You can look in my older posts the steps of a clean zero fill flash)
Sent from my GT-I5800 using xda premium
No luck after flashing zerofill then the stock rom with odin its still boots straight to recovery.
Yeah i have tried pressing "reboot system now" but it goes back to recovery.
xduox said:
No luck after flashing zerofill then the stock rom with odin its still boots straight to recovery.
Yeah i have tried pressing "reboot system now" but it goes back to recovery.
Click to expand...
Click to collapse
did u also wipe data?
or try to pull out sdcard from slot an d try again...
Sent fom my S-II with CM-10 by mcm811(12/06/2012] powered by [url="http://dorimanx.shine.sk/kernels-jb/Kernel_Dorimanx-V7.29-ICS-JB-22-51--06-12-12-SG2-PWR-CORE.zip]DorimanX kernel v 7.29[/url]
xduox said:
No luck after flashing zerofill then the stock rom with odin its still boots straight to recovery.
Yeah i have tried pressing "reboot system now" but it goes back to recovery.
Click to expand...
Click to collapse
As of what I know, stock ROM doesn't have recovery right?
Hey.... don't forget to thank me!!!
Arjav23 said:
As of what I know, stock ROM doesn't have recovery right?
Hey.... don't forget to thank me!!!
Click to expand...
Click to collapse
yes it does but a lame one
Sent fom my S-II with CM-10 by mcm811(12/06/2012] powered by [url="http://dorimanx.shine.sk/kernels-jb/Kernel_Dorimanx-V7.29-ICS-JB-22-51--06-12-12-SG2-PWR-CORE.zip]DorimanX kernel v 7.29[/url]
rkoby13 said:
did u also wipe data?
or try to pull out sdcard from slot an d try again...
Click to expand...
Click to collapse
Yeah, tried with no SD card in either. still booting into recovery.
it does say can't open E:cache/recovery/log twice in the recovery screen.
Any other ideas i could try?
when i flash cm10 with rom manager on p920 with cwm recovery (non touch) this happens
youtube(dot)com/watch?v=EbO6zCdJNEM
any help would be appreciated thanks in advance
Since you didn't specify anything that you tried , I'm gonna assume you did nothing.
First i'm gonna tell you what I did because it worked in my case.
You should start over.
First flash v21e with v21e baseband.
http://forum.xda-developers.com/showthread.php?t=1540163
Follow this guide to root and install recovery do not forget to update superuser and it's binary (recovery gets all funky and starts to blink if you don't)
Binary update is under the info tab in the app.
flash the recovery non-touch! This is the important bit. Standart clockwork recovery.
When you're done power off and hold volume down and 3d and press the power button till it vibrates.
Flash cm10's latest nightly and gapps.
It should boot.
If it doesn't boot or restarts after 2 mins or no cell reception , you have an incompatible baseband. V21e is problematic even with ICS so I flashed v21d and now it's all better.
if it's still causing problems try Bernie's files they are like garlic to a vampire or so I heard.
Sent from my LG-P920 using xda app-developers app
i was on v20e when i flashed cm10 i did almost everything formating data, wiping dalvik cache, factory reset but i couldn't get it to work and thanks to the reply but i saw on a friends sgsII that cm10 is still having bugs and ill wait 'till a stable version comes out thanks for the reply
amel95 said:
i was on v20e when i flashed cm10 i did almost everything formating data, wiping dalvik cache, factory reset but i couldn't get it to work and thanks to the reply but i saw on a friends sgsII that cm10 is still having bugs and ill wait 'till a stable version comes out thanks for the reply
Click to expand...
Click to collapse
Well it's the fastest ROM available for p920.
I only give credit when it's due.
It's almost stable now it's getting "daily" updates.
Just a small amount of bugs left.
It won't be long.
Sent from my LG-P920 using xda app-developers app