Related
Recently received the Phantom Skinz Full Body set and have gone through installation.
Here's the breakdown:
The Pros:
- The Screen Skin looks good and feels good. The extra drag vs. the stock glass is slight and the overall clarity is very good (doesn't have any noticeable detraction from the crisp, contrasty screen).
- The main screen skin and front overlays were fairly easy to apply and once dried have a very nice unobtrusive look
- Comes with 2 sets of skins
The Cons:
- included directions are WAY OFF from the install video on their site. Soaking times, how long to let it sit and dry, etc...
- Edge bubbling on every corner for the back overlays. Directions say to "cup the corner with palms and hold 30 seconds", but I've done it over and over again and they keep popping off after a short while
- A WHOLE LOT of wet work involved in applying these skins. Application involves soaking the skin in water first, then (as instructed) with your fingers fully wet, take the wet skin and put it wet onto the phone and then use the included credit card shaped "squeegy" to push out the extra water. Not so much a big deal for the screen skin, but getting that much water around and near the audio/mic/power and such ports while putting on the body skins is asking for trouble.
Final Thoughts
I imagine in some small (heck, maybe in large) part, the corner bubbling issue is due to me not applying the skin properly. But I'm not some clueless granny that doesn't know the difference between a mouse and a blackberry and the included instructions are vague in important places and almost completely different than the video instructions shown at their website (for example; The included instructions say to use warm water WITH SOAP)
Bottom line: Stick with just the screen skin, skip the full body.
The online video instructions say to use soap as well. IIRC, she said that at their facility, they use one drop of Johnson's baby shampoo per 32 oz of water.
I would avoid Phantom Skinz altogether. Here's the review I posted about my experience with one of them on my Moto Droid in the skins topic.
Phantom Skinz
I got a PS for my Moto Droid because I didn't want something as grippy as the Zagg. PS had great reviews and came with 2 full sets for the price of 1 zagg with 33% off on top of that ($16.50 in the end). The first installation of the screen got some dust and fuzz under it since I was OCD about getting it perfect, so I emailed them and they sent me a replacement for free no questions asked. I know it did come with two sets of protectors but I wanted to keep one as a backup still. Second installation was perfect. No dirt, dust, fuzz or finger prints. Screen was perfectly smooth (no orange peel) and the touch felt almost the same as the glass. Put the rest of the body on without a problem as well with just a few bubbles in some of the tougher spots. I was very impressed, but now a month later I am not so much. After daily use taking my phone in and out of my pocket (sometimes shared with keys) the skin is filled with knicks and wrinkles. While the film may not technically scratch, it is vulnerable to indentations and air bubbles forming which do not "self heal". Instead of scratching, it seems like the skin stretches in place, resulting in a wrinkle/groove with little marks that look like air bubbles underneath. Not only does it make the screen look dirty, but you feel them while using the touch screen. As I write this, I just dug my finger nail into the screen and tried to scratch it, leaving another permanent groove. Needless to say, I will be taking off the PS and throwing it in the trash. The rest of the body has surprisingly stayed pretty clean of wrinkles, so it may have something to do with its application on glass. I will put some pictures up when I get the chance this evening. Overall, I would not recommend PhantomSkinz. It looked and felt great for a couple weeks, but now every day I am finding more and more knicks and wrinkles and that is just unacceptable compared to others. This skin is NOT scratch proof like other comparable skins on the market! However, I will commend their customer service for being very helpful and quick to reply.
And here a pictures of what it looks like:
h ttp://forum.xda-developers.com/showpost.php?p=5415251&postcount=44
(remove the space after the h, I can't post links yet)
Bottom line here as that they are smoother than other brands but scratch pretty easily. You should check back in on this topic in a month or two and see if your opinion has changed.
I applied the full body skin about a week ago. There's definitely a lot of water involved but most of the danger can be avoided with some caution. I used Q-tips to do a lot of the credit card work around the edges so that it soaked up the water it pushed out.
A good trick for the corners is to use some sealant/piping tape to hold them down. This is a lot better than using your hand for 30 seconds, and you can leave it there for as long as you want (I left the tape on mine for 2 days since I wasn't going anywhere that I needed to show off my phone, I figured why not? Now my corners are perfect).
So far I like PhantomSkinz because it wraps the corners a little better than the other skins. Bodyguardz is a little better in clarity and material. InvisibleShield has too much of the orange peel effect. Haven't had a chance to try BestSkinsEver.
As for detonation's review, it's too early for me to tell if I'll have the same problems, but I agree that the material doesn't seem on par with InvisibleShield or BodyGuardz. But since I still used the carrying case and treat my phone with much care even with the skin on, I don't think it'll be too much of a problem.
I recently got the phantom skinz full body set, after I read the instructions I thought that there was no way I was applying wet/soapy film to my N1, it just doesn't make any sense. Water/soap plus electronics? Its a recipe for disaster, besides the fact that I suck at arts and crafts type stuff just like this. I would imagine I would get water somewhere inside the device, and knowing me it would reach the many water detectors in the phone. It doesn't seem worth it, so I applied just the screen part sans water/soap, and needless to say it sucked big time, even when I got all the bubbles out.. it had a terrible gray haze on parts of the screen it was bad (maybe due to not using the water/soap method). Can any one suggest just a simple screen protector that doesn't' require to dunk your device in water?
boxmander said:
I recently got the phantom skinz full body set, after I read the instructions I thought that there was no way I was applying wet/soapy film to my N1, it just doesn't make any sense. Water/soap plus electronics? Its a recipe for disaster, besides the fact that I suck at arts and crafts type stuff just like this. I would imagine I would get water somewhere inside the device, and knowing me it would reach the many water detectors in the phone. It doesn't seem worth it, so I applied just the screen part sans water/soap, and needless to say it sucked big time, even when I got all the bubbles out.. it had a terrible gray haze on parts of the screen it was bad (maybe due to not using the water/soap method). Can any one suggest just a simple screen protector that doesn't' require to dunk your device in water?
Click to expand...
Click to collapse
Dude... you BARELY have to use any water to get the screen to turn out right. Sorry you wasted your PS... but ask them for a replacement, and mail it to me! I do this **** with my eyes closed. It's really not rocket science, and you don't have to "dunk" your phone in water.
boxmander said:
I recently got the phantom skinz full body set, after I read the instructions I thought that there was no way I was applying wet/soapy film to my N1, it just doesn't make any sense. Water/soap plus electronics? Its a recipe for disaster, besides the fact that I suck at arts and crafts type stuff just like this. I would imagine I would get water somewhere inside the device, and knowing me it would reach the many water detectors in the phone. It doesn't seem worth it, so I applied just the screen part sans water/soap, and needless to say it sucked big time, even when I got all the bubbles out.. it had a terrible gray haze on parts of the screen it was bad (maybe due to not using the water/soap method). Can any one suggest just a simple screen protector that doesn't' require to dunk your device in water?
Click to expand...
Click to collapse
you didnt follow the instructions and it didnt work well for you? gtfo
boxmander said:
I recently got the phantom skinz full body set, after I read the instructions I thought that there was no way I was applying wet/soapy film to my N1, it just doesn't make any sense. Water/soap plus electronics? Its a recipe for disaster, besides the fact that I suck at arts and crafts type stuff just like this. I would imagine I would get water somewhere inside the device, and knowing me it would reach the many water detectors in the phone. It doesn't seem worth it, so I applied just the screen part sans water/soap, and needless to say it sucked big time, even when I got all the bubbles out.. it had a terrible gray haze on parts of the screen it was bad (maybe due to not using the water/soap method). Can any one suggest just a simple screen protector that doesn't' require to dunk your device in water?
Click to expand...
Click to collapse
Try clairivue or martin fields. Just do a google search since I can't post links yet.
typ_ex said:
you didnt follow the instructions and it didnt work well for you? gtfo
Click to expand...
Click to collapse
LOL! i agree. i have had no issues at all with my phantomskinz- both on the magic and now my nexus- i'll admit i do suck at installing them but what i do is get a bowl o water, put a few drops of baby shampoo in swich it around a bit, then dunk the piece in there- hold it over bowl until excess is removed then you can put it on device- the soap/water allows you to move it into position easily and helps squeegee the bubbles....
i wouldnt blame a product because you didnt follow their instructions how to install it...
I actually prefer the bowl of soapy water to the sprays that come with other skins. Submerging it ensures the entire skin is lubed up, and the small amounts of drips on the device is harmless. Just let it dry out overnight before turning it on.
I think Martins is completely over priced. I tried BSE and Phantom and all works great. Once dried it is practically invisible with only the slightest orange peel effect. I'm pretty OCD and it is minimal enough that it doesn't bother me. What does bother is that both of the screen protectors are slightly shorter than the screen.
As for applying the phantom and drowning in water as people are saying I don't do that. I've put on enough of these to know you only need a slight amount. I use a spray and just mist the backing so that it is enough to be able to adjust when putting on but not dripping with water. I use a cloth to absorb the water on the edges as I push the bubbles/excess water out. Fairly easy process. It just takes a slow hand and patience.
pongalong said:
A good trick for the corners is to use some sealant/piping tape to hold them down. This is a lot better than using your hand for 30 seconds, and you can leave it there for as long as you want (I left the tape on mine for 2 days since I wasn't going anywhere that I needed to show off my phone, I figured why not? Now my corners are perfect).
Click to expand...
Click to collapse
Ok I have to ask: what is sealant / piping tape? And where do you buy that? Home Depot? Bed, Bath and Beyond?
Paul22000 said:
Ok I have to ask: what is sealant / piping tape? And where do you buy that? Home Depot? Bed, Bath and Beyond?
Click to expand...
Click to collapse
Some might know it as teflon tape, thread seal tape or plumbers tape. It's a thin white non-adhesive tape that you use on pipes/hoses to make connections water tight. Home Depot would have it or any hardware store - it's pretty common. Just cut a few good length pieces and wrap your phone up like a mummy on the difficult spots. It works well because it's stretchy, conforms to shape and naturally adheres to the phone skin.
pongalong said:
Some might know it as teflon tape, thread seal tape or plumbers tape. It's a thin white non-adhesive tape that you use on pipes/hoses to make connections water tight. Home Depot would have it or any hardware store - it's pretty common. Just cut a few good length pieces and wrap your phone up like a mummy on the difficult spots. It works well because it's stretchy, conforms to shape and naturally adheres to the phone skin.
Click to expand...
Click to collapse
...and it's non-stick!
typ_ex said:
you didnt follow the instructions and it didnt work well for you? gtfo
Click to expand...
Click to collapse
Like I mentioned before, my application didn't work well cause I didn't follow the instructions. And I wasn't hating on PS, get a grip. Besides after some people posted about this topic I might give it another go, PS gave me two for one so I can redo it. Why are you here? Perhaps you should try posting things that are more constructive.
pongalong said:
Some might know it as teflon tape, thread seal tape or plumbers tape. It's a thin white non-adhesive tape that you use on pipes/hoses to make connections water tight. Home Depot would have it or any hardware store - it's pretty common. Just cut a few good length pieces and wrap your phone up like a mummy on the difficult spots. It works well because it's stretchy, conforms to shape and naturally adheres to the phone skin.
Click to expand...
Click to collapse
Interesting. I'll definitely get some. Thanks for the tip.
Hmm... I'm going to go to Home Depot to buy some kind of special tape I've never heard of to wrap up my phone like a mummy in order to prevent the corners from lifting on my phone's skin protector. Phone enthusiast or what?
Phantom does have the best skins by far...
The trick to installation to make it perfect:
Use the Johnson's/water mix as they advised.
Ignore all of their other directions.
Peel off the piece you want to apply. Dryly.
Dip your fingers in the water and apply it to the skin using your fingers.
Once both sides of the skin are wet, use your fingers as a squeegee to pull off any excess water.
Apply the skin to your phone. Keep the skin sitting on your phone in it's original shape.
Use your fingers, not the applicator card, to squeegee out the air bubbles. You don't need to apply very much pressure at all. The bubbles move around extremely easily.
Now, let the skin dry for about 2 minutes. Once you notice the skin starting to cling to the phone a little harder, grab the ends that you need to wrap around the phone and stretch them into place. This is the key step. Stretching it makes it stick so much better, the corners align perfectly with the phone when you do this, and all the gaps left between the skin pieces when you don't stretch it are gone. The skin has to be stretched to fit the phone, otherwise the pieces will all be a little to small and the corners will blow.
Repeat with the other pieces.
Enjoy your sexily phantom skinned N1.
anyone with pics of this case ?
I just wanted to comment about Phantom Skinz because I have had a really good experience with them and I am going to get another set from them as soon as they release it for the HD2!
I got Phantom Skinz for a Nano about a year ago and it has been awesome! I bought the PS retail (they have a location in my area) so I only got one set, but I did it myself with no problems. I had to take it off for a warranty replacement on the Nano and I put the same skin back on the new Nano and it looks just as good as it did on the first application. It's awesome that it can be taken off and put back on again using only water.
I got GA for my G1, but it is the worst product ever. I had it professionally installed at a Ghost Armor location because I wanted it to be perfect for my baby. But it didn't even last a month before it started peeling! GA can only be applied once with a special solution (thats what the GA salespeople told me) and it can't be fixed with water like Phantom Skinz. Phantom Skinz has never actually peeled like the GA did, but at least I could fix PS with water if I needed to!
I literally had the full body GA skin replaced 4 times in the course of a year because it peeled so bad and I am not just talking the corners! I did everything they told me to; keep the phone in a case so it doesnt rub in your pocket, keep any liquid of the phone (durr), don't leave the skin in prolonged sunlight, blah bla blah.
It was $35 for the original GA skin and installation and then they charged me $10 labor for the "free warranty replacement" every time I had the skin redone. Oh, and they changed the GA product for my phone 3 times out of the 4 I got it replaced and the changes never fixed any of the problems I had with the skin. GA also yellowed really bad and actually got progressively worse over the course of their " improved product revisions". The last time I had the G1 wrapped the skin was a pretty moderate yellow in about a week...
The salespeople sucked me in every time with leading me to believe the GA skin for the G1 was revised and the problems were fixed. I spent way too much money on their crappy ass product!
Ghost Armor is an awful product! Please just stay the hell away from them!
There is no need to submerge anything in any fluid. I have installed clear skins on many devices by using soapy water. I dont spray it on the phone, I spray a small mist on the protector before applying. Trust me there is not enough water to damage anything because as i push out the bubble I wipe the water.
If you are concerned about it then remove the battery and wait a day like the other people have suggested. once the process is complete the skin will need to settle for a few days before it looks good.
I used some spray that came with a skin before and I did not like it compared to the soapy water MIST.
I also do not use the skin on touch screens because my finger drags on it compared to other screen protectors that are designed to protect the screen.
Does anyone have a YouTube link or willing to put up a video showing how the apply their protective skin? (BSE, Bodyguardz, etc.)
Much appreciated!
I think zagg invisibleshield's website has videos on installation. The install procedure is the same for all skins that require a "wet" application.
http://www.zagg.com/support/installvideo.php?intcmp=bottomnav
As for the liquid solution, it's just water mixed with plain soap or mild baby shampoo. Most people use Johnson's baby Shampoo, although personally I use a bar of "Simple" branded "Pure Soap". If you're using liquid based soap, i'd say 1 drop to about a pint of water. If using a soap bar, just run the water over the bar and catch the water with a bowl or something.
As for the liquid solution, it's just water mixed with plain soap or mild baby shampoo. Most people use Johnson's baby Shampoo, although personally I use a bar of "Simple" branded "Pure Soap". If you're using liquid based soap, i'd say 1 drop to about a pint of water. If using a soap bar, just run the water over the bar and catch the water with a bowl or something.
Click to expand...
Click to collapse
fairy works? I don't have other soap at home now and want install the BSE on my Nexus, should buy other soap better? Can use window cleaner liquid? Thanks!
From personal experience, use light soap (like Simple, Johnson and Johnson, Cetaphil, QV). Don't use your window cleaning thing! It might have other unwanted chemicals. I may be wrong tho, but a drop of QV to a cup of water worked perfect for me .
Whatever you do DON'T use window cleaner fluid. The majority of window cleaners don't contain soap at all, but contains a weak solvent based solution designed to evorate faster than water without leaving any residue. This stuff is perfect on glass but it can harm stuff like plastics and some metals, which is why most have warning labels saying not to use it on such surfaces.
The whole point of the soap is so it adds a bit of lubrication for easier application of the skin. If you really are that desperate plain water works, just that you won't be able to slide the skin around as easily to make installation easier.
Actually I've never heard of QV here in the UK so I can't comment on that. Basically anything soap based that is mild with the least additives (ie mosturisers) are good so they don't leave a residue behind when it dries up a few days later.
thanks for all answers!! I will try with J&J that can buy it in spain
Does any of you proud X owners think that if one applies the a screen protector incorrectly (bits of dust between the protector and the screen) or something similiar, that it could cause the screen to scratch, having a sand-like effect? I'm really paranoid about the screen when it's naked...
btw. how the hell am i supposed to put on a protector without air bubbles? Seems impossible.
I dunno about the first question. But you're supposed to be able to put it on using a credit card to smooth it out as you apply it. In saying that, I've never done it successfully
Sent from my One XL using XDA Premium
lukas_1 said:
Does any of you proud X owners think that if one applies the a screen protector incorrectly (bits of dust between the protector and the screen) or something similiar, that it could cause the screen to scratch, having a sand-like effect? I'm really paranoid about the screen when it's naked...
btw. how the hell am i supposed to put on a protector without air bubbles? Seems impossible.
Click to expand...
Click to collapse
I doubt having anything under the screen protector would harm these screens. The junk stuck under it isn't going to move as it's stuck in the adhesive.
The best way to apply them (for me anyways) is to clean the screen with an LCD cleaner (or make your own), use tape to blot up anything else, wipe again.
Next--I have found by taking the first layer of the film protecting the screen protector upside down works best. Dust and debris can fall and settle on the sticky side. Then carefully apply. As long as you don't touch the adhesive side, you can pick it up and keep applying the protector until you get it right. You want the top of the protector just about even with the AT&T globe.
Enjoy.....
By using tape do you mean using scotch tape, sticking it on the screen and pulling off?
I'll try washing my screen protector, drying it up, cleaning the screen with MF cloth, taping it up and then hopefully I'll be able to apply it perfectly! :fingers-crossed:
lukas_1 said:
Does any of you proud X owners think that if one applies the a screen protector incorrectly (bits of dust between the protector and the screen) or something similiar, that it could cause the screen to scratch, having a sand-like effect?
Click to expand...
Click to collapse
If you trap a particle of dust under the protector that has a hardness greater than the screen, yes, it will eventually scratch the screen in that spot.
However: Gorilla Glass has a Mohs hardness of around 9, which means there is not a lot in the mineral world that can scratch it. The likelihood of your trapping something like that under the screen protector, if you apply it correctly, is not great.
You should be able to remove a particle big enough to scratch your phone from the screen protector without having to wash the protector. I think you would ruin the screen protector if you wash it.
I've used packaging tape as it leaves no residue. Done it for years before with iPhones before owning an Android.
Sent from my HTC One X using xda app-developers app
When you apply your screen protector, do it in a washroom with a hot shower running. The steamy air will prevent dust from getting under it.
I will try that out. I always seem to get a bit of dust or lint on the corner of my screen protectors.
flar2 said:
When you apply your screen protector, do it in a washroom with a hot shower running. The steamy air will prevent dust from getting under it.
Click to expand...
Click to collapse
Just don't wait too long, not sure if the humidity sensor would get affected.
The way I do it: obviously, I clean the screen then remove completely the clear layer from under to make sure no dust will fall in. I'm holding the screen protector with the tips of my fingers on the sides and gently bend it across (the long) median then align with the phone's screen (this is the hard part). Put the screen protector on the screen at this stge the contact area will be the median line, and then use a credit card and work your way to the eges (one side at a time). I never got any bubbles under this way. I caught some dust particles few times though. It takes patience but it pays off, currently I have no dust or bubbles on it.
Sent from my HTC One X using xda app-developers app
iElvis said:
If you trap a particle of dust under the protector that has a hardness greater than the screen, yes, it will eventually scratch the screen in that spot.
Click to expand...
Click to collapse
If the particle is trapped in one place and can't move, I don't see how it can cause a scratch.
Plus, if any dust gets on the screen during the application process (as long as you've done a halfway decent job), its probably airborne. So its not grit or sand or anything like that (which would just fall to the ground instantly) but more likely skin, ash, etc.
A little preparation and a few tricks will go a long way to a good screen protector install. My process is:
1) Use a wet apply protector. Don't know why, but I've had vastly better results (no dust under protector) with wet apply rather than dry ones. I got to the point where I can do a dry type almost flawlessly, but only after lots of practice and a great amount of care. But even so, there still tends to be a dust particle or two. With wet apply, the first one I ever tried was perfectly dust free with little effort, and the subsequent ones also.
2) Before starting, examine the protector and see how it fits on the phone. With the backing still on the protector, place it on the phone's screen and match up the openings and edges to familiarize yourself.
3) As previously mentioned, use steam to pull dust out of the air. I run a hot shower for 5-10 minutes, then apply the protector in the bathroom. It won't eliminate all the dust, but makes a big difference.
4) Wipe the screen off with a micro-fiber cloth (often included with better quality wet apply protectors).
5) Blow off the screen with a can of compressed air (the kind used to dust electronics and whatnot) to get rid of any remaining dust.
6) Spray the application solution. Quickly apply the protector. As another mentioned, don't hold the sticky side up after you take the backing off, or it will instantly catch dust. Put the protector on quickly, don't let the sticky side touch anything but the screen. Handle the protector as little as possible, and by the edges.
7) Squeegee the protector down with a credit card (make sure the edge of the card is smooth) or some protectors will include a rubber squeegee. Blot the excess moisture at the edges. Then leave the phone alone while it dries.
The best investment for my smartphone has been Ghost Armor. I have spent so much money on packs of screen protectors. A couple years ago I decided $45 was worth it if I only needed to do it once a year. You won't regret it, and you don't have to install it.
Npsacobra said:
The best investment for my smartphone has been Ghost Armor. I have spent so much money on packs of screen protectors. A couple years ago I decided $45 was worth it if I only needed to do it once a year. You won't regret it, and you don't have to install it.
Click to expand...
Click to collapse
I've also heard horror stories about peoples phones not working after they are done or the screen not functioning afterwards. And since you sign an agreement they aren't liable
No thank you
Sent from my One X using Tapatalk 2
Npsacobra said:
The best investment for my smartphone has been Ghost Armor. I have spent so much money on packs of screen protectors. A couple years ago I decided $45 was worth it if I only needed to do it once a year. You won't regret it, and you don't have to install it.
Click to expand...
Click to collapse
I replace about 3 screen protectors a year (bought from amazon clear ones, 3 for $1.99). Other than a little rainbow effect when the screen is off, no regrets looks just like glass. I've been through many protectors before (ridiculously many on my first 'smartphones' rip moto ming, touchpro 1&2) but I can't justify the cost anymore, I'd rather have none (since I change my device every 8-12 months).
Sent from my HTC One X using xda app-developers app
I went with ghost armor myself, they installed for like 22 bucks.
No issues to report.
WR
Sent by WR's O/C'd One-XL on CR-V
Npsacobra said:
The best investment for my smartphone has been Ghost Armor. I have spent so much money on packs of screen protectors. A couple years ago I decided $45 was worth it if I only needed to do it once a year. You won't regret it, and you don't have to install it.
Click to expand...
Click to collapse
Screen protectors that come in packs are crap. The higher quality kind that cost $15 or so (Skinomi, Zag, etc) are in a different class. I've had a Skinomi on my One X since release (May), and one on my Flyer for almost a year and a half. Both are still looking great.
Sent from my HTC One X using xda app-developers app
I've never used a screen protector. Don't like the feel of them. This phone has great glass. I'm a mechanic and I keep my phone in my pocket all day (screen towards my leg of course) and not one scratch
Sent from my HTC One XL using xda app-developers app
I use Xtremeguard. Wet application and every time I get a perfect install. No bubbles no particles.
Sent from my HTC One XL using Tapatalk 2
charlieb620 said:
I use Xtremeguard. Wet application and every time I get a perfect install. No bubbles no particles.
Sent from my HTC One XL using Tapatalk 2
Click to expand...
Click to collapse
Was gonna say the same bout my Zagg...love it! Wet application and a squeegee, works perfect every time. The wet app also can aide with alignment if you don't get it just right, you can still move it before you squeegee.
Sent from my HTC One XL using xda premium
Not sure if this is still relevant, but I will put a vote for Ghost Armor as well. I have it for all my devices and it's like there's nothing there. Crystal clear and screen responsiveness is great. Had Zagg before and the orange peel feel and stickiness made me remove it. Those cheap packs aren't great either, they scratch up very very quickly.
I ended up with few of the small spiderweb bubbles under my Nilkin screen protector I installed last night. A few along the very top edge of the glass, and a few at the bottom. I am currently trying the binder clip with micro-fiber cloths trick to apply pressure and remove them. If that doesn't work, I saw a mention of putting the phone in a plastic bag and using a vaccuum hose.
1.) Has the vaccuum trick worked for anybody here.
2.) I got to thinking about this. I have a foodsaver vaccuum sealer for storing food. Would this do a better job of pulling out the bubbles since it creates a better seal?
I don't see how it could hurt the phone in any way. Others thoughts on this?
-Jeremy
What i would suggest :
Clean the screen with piece of cloth ( Mostly comes with the package)
Get some tape 2 pcs...
place one on the top of the screen protector , and pull it slowly to remove the screenprotector
get the other piece of tape and tape it around ur finger (Inside out) now with 1 finger u would pull the screen protector up
and with the other u would tap the screen where the bubbles are , this will make the bubbles go away!
Then just replace the screen protector and remove the tape, DONE!
PS: If this didn't help , then send your device to me i will fix it for free :good:
Bubbles are created by dust on the screen. I read someone suggest lift the protector with one piece of sticky tape then use another to remove the dust from the screen and protector. Do this for each bubble
Edit. Crap. Teaches me not to read the replies
Sent from my Nexus 5 using Tapatalk
Blowtorch em off
Sent from my Nexus 5 using Tapatalk
Assuming its not dust....just a bubble, like the huge one to the right of the led notification ....I used a thin cloth and an adjustable wrench and tighten the wrench firmly on the bubble...with the cloth protecting the phone of course. In 20 minutes per bubble....I had none. Gone for good.
Mime ghost glass BTW.
Sent from my N5 cell phone telephone....
I would suggest not doing it during night time. Do it on a very illuminated area. Clean with the provided cloth uniformly until looks perfect. I my self always blow the screen during the sticking process and never get dust between screen and protector. If any bubble, sweep it with a credit card before removing the top layer.
As someone said once you have them its a fail. I use the glass ones I know they crazy prices but I do the steam room bit and drop them on. No bubbles.
Sent from my Nexus 5 using XDA Premium 4 mobile app
You may (or may not) have noticed it is easier to apply screen protectors at times; you could apply them all day flawlessly, and other days they just don't play ball. The reason is humidity! The more humid the environment the less chance there is of dust particles wizzing around. Typically this will be summer here in the UK where its gets really humid. To replicate the humidity in colder climates / seasons, you can run a hot shower or bath and let the bathroom steam up. The screen protector should apply perfectly there, but you don't want to spend to long there with your precious phone, condensation and all. You could also try bowls of steaming hot water around the area you're going to be applying the screen protector in.
Be sure to apply common sense before applying the screen protectors if you're going to be using the above mentioned methods and the usual rules apply, clean the screen etc before hand.
Just installed the Bodyguardz Pure Tempered Glass screen protector with the Express Align tray on my white Galaxy S6.
It is 100% Halo Free and went on pretty much perfect. Not sure how it would come out on the black S6 but I'm not complaining about mine.
I have installed tons of screen protector over the years and this is my first Bodyguardz. The Express Align tray works perfect and I highly recommend it.
Just made sure you push real hard and wait for the protector to adhere to the phone before trying to remove the Express Align tray.
Well worth the $35.00 from the AT&T Store. I also have the Zagg as a back up but don't think I'll be needing it right now.
It's a little short on the top and bottom but that is how they avoid the halo.
I'm sure Bodyguardz will be offering their "Crown" for the S6 Pure in the near future.
I also managed to installed it without getting any junk under the screen
(the spots in pics are only in the pics, not under glass).
Here are a few pictures.
Can you share any tips that help to prevent dust or lint get under the screen during installation?
AirSupply said:
Can you share any tips that help to prevent dust or lint get under the screen during installation?
Click to expand...
Click to collapse
Just a real clean area and have a nice bright light over the area you are working on. Also a can of compressed air comes in handy. Soft Micro Fiber rags. I use the Giottos Large Rocket Blower ( used with my cameras). I believe that they are only like $10. and something you will always use as I do. Bodyguardz is coming out with their "Crown" for the S6 to fill in the spaces.
http://www.amazon.com/Giottos-Rocket-Blaster-Blower-Large/dp/B00017LSPI
My tip for a clean and lint free installation. Go into your bathroom. Turn on the shower with hot water. Let it get nice and steamy. It will settle the dust in the room and then clean and apply the screen protector. Sounds crazy but been doing this for years and never get anything under my screen protectors.
c_86 said:
My tip for a clean and lint free installation. Go into your bathroom. Turn on the shower with hot water. Let it get nice and steamy. It will settle the dust in the room and then clean and apply the screen protector. Sounds crazy but been doing this for years and never get anything under my screen protectors.
Click to expand...
Click to collapse
+1
I've been doing this for a while to.
Sent from my SM-G920V using XDA Free mobile app
c_86 said:
My tip for a clean and lint free installation. Go into your bathroom. Turn on the shower with hot water. Let it get nice and steamy. It will settle the dust in the room and then clean and apply the screen protector. Sounds crazy but been doing this for years and never get anything under my screen protectors.
Click to expand...
Click to collapse
That depends on your location actually. I also do the same but Moscow is very very dusty city and I live near the highway... so even after the hot shower I can see particles floating))) Usually I buy couple of protectors so succeed with at least one, that is not an option with a 35 bucks SP though )
Another vote for the steamy shower route.
I'm tempted to pull this one off and try the Zagg I have sitting here.
If it was not so short on the top & bottom it would be perfect.