Screen protector dilemma - AT&T, Rogers HTC One X, Telstra One XL

Does any of you proud X owners think that if one applies the a screen protector incorrectly (bits of dust between the protector and the screen) or something similiar, that it could cause the screen to scratch, having a sand-like effect? I'm really paranoid about the screen when it's naked...
btw. how the hell am i supposed to put on a protector without air bubbles? Seems impossible.

I dunno about the first question. But you're supposed to be able to put it on using a credit card to smooth it out as you apply it. In saying that, I've never done it successfully
Sent from my One XL using XDA Premium

lukas_1 said:
Does any of you proud X owners think that if one applies the a screen protector incorrectly (bits of dust between the protector and the screen) or something similiar, that it could cause the screen to scratch, having a sand-like effect? I'm really paranoid about the screen when it's naked...
btw. how the hell am i supposed to put on a protector without air bubbles? Seems impossible.
Click to expand...
Click to collapse
I doubt having anything under the screen protector would harm these screens. The junk stuck under it isn't going to move as it's stuck in the adhesive.
The best way to apply them (for me anyways) is to clean the screen with an LCD cleaner (or make your own), use tape to blot up anything else, wipe again.
Next--I have found by taking the first layer of the film protecting the screen protector upside down works best. Dust and debris can fall and settle on the sticky side. Then carefully apply. As long as you don't touch the adhesive side, you can pick it up and keep applying the protector until you get it right. You want the top of the protector just about even with the AT&T globe.
Enjoy.....

By using tape do you mean using scotch tape, sticking it on the screen and pulling off?
I'll try washing my screen protector, drying it up, cleaning the screen with MF cloth, taping it up and then hopefully I'll be able to apply it perfectly! :fingers-crossed:

lukas_1 said:
Does any of you proud X owners think that if one applies the a screen protector incorrectly (bits of dust between the protector and the screen) or something similiar, that it could cause the screen to scratch, having a sand-like effect?
Click to expand...
Click to collapse
If you trap a particle of dust under the protector that has a hardness greater than the screen, yes, it will eventually scratch the screen in that spot.
However: Gorilla Glass has a Mohs hardness of around 9, which means there is not a lot in the mineral world that can scratch it. The likelihood of your trapping something like that under the screen protector, if you apply it correctly, is not great.

You should be able to remove a particle big enough to scratch your phone from the screen protector without having to wash the protector. I think you would ruin the screen protector if you wash it.

I've used packaging tape as it leaves no residue. Done it for years before with iPhones before owning an Android.
Sent from my HTC One X using xda app-developers app

When you apply your screen protector, do it in a washroom with a hot shower running. The steamy air will prevent dust from getting under it.

I will try that out. I always seem to get a bit of dust or lint on the corner of my screen protectors.

flar2 said:
When you apply your screen protector, do it in a washroom with a hot shower running. The steamy air will prevent dust from getting under it.
Click to expand...
Click to collapse
Just don't wait too long, not sure if the humidity sensor would get affected.
The way I do it: obviously, I clean the screen then remove completely the clear layer from under to make sure no dust will fall in. I'm holding the screen protector with the tips of my fingers on the sides and gently bend it across (the long) median then align with the phone's screen (this is the hard part). Put the screen protector on the screen at this stge the contact area will be the median line, and then use a credit card and work your way to the eges (one side at a time). I never got any bubbles under this way. I caught some dust particles few times though. It takes patience but it pays off, currently I have no dust or bubbles on it.
Sent from my HTC One X using xda app-developers app

iElvis said:
If you trap a particle of dust under the protector that has a hardness greater than the screen, yes, it will eventually scratch the screen in that spot.
Click to expand...
Click to collapse
If the particle is trapped in one place and can't move, I don't see how it can cause a scratch.
Plus, if any dust gets on the screen during the application process (as long as you've done a halfway decent job), its probably airborne. So its not grit or sand or anything like that (which would just fall to the ground instantly) but more likely skin, ash, etc.
A little preparation and a few tricks will go a long way to a good screen protector install. My process is:
1) Use a wet apply protector. Don't know why, but I've had vastly better results (no dust under protector) with wet apply rather than dry ones. I got to the point where I can do a dry type almost flawlessly, but only after lots of practice and a great amount of care. But even so, there still tends to be a dust particle or two. With wet apply, the first one I ever tried was perfectly dust free with little effort, and the subsequent ones also.
2) Before starting, examine the protector and see how it fits on the phone. With the backing still on the protector, place it on the phone's screen and match up the openings and edges to familiarize yourself.
3) As previously mentioned, use steam to pull dust out of the air. I run a hot shower for 5-10 minutes, then apply the protector in the bathroom. It won't eliminate all the dust, but makes a big difference.
4) Wipe the screen off with a micro-fiber cloth (often included with better quality wet apply protectors).
5) Blow off the screen with a can of compressed air (the kind used to dust electronics and whatnot) to get rid of any remaining dust.
6) Spray the application solution. Quickly apply the protector. As another mentioned, don't hold the sticky side up after you take the backing off, or it will instantly catch dust. Put the protector on quickly, don't let the sticky side touch anything but the screen. Handle the protector as little as possible, and by the edges.
7) Squeegee the protector down with a credit card (make sure the edge of the card is smooth) or some protectors will include a rubber squeegee. Blot the excess moisture at the edges. Then leave the phone alone while it dries.

The best investment for my smartphone has been Ghost Armor. I have spent so much money on packs of screen protectors. A couple years ago I decided $45 was worth it if I only needed to do it once a year. You won't regret it, and you don't have to install it.

Npsacobra said:
The best investment for my smartphone has been Ghost Armor. I have spent so much money on packs of screen protectors. A couple years ago I decided $45 was worth it if I only needed to do it once a year. You won't regret it, and you don't have to install it.
Click to expand...
Click to collapse
I've also heard horror stories about peoples phones not working after they are done or the screen not functioning afterwards. And since you sign an agreement they aren't liable
No thank you
Sent from my One X using Tapatalk 2

Npsacobra said:
The best investment for my smartphone has been Ghost Armor. I have spent so much money on packs of screen protectors. A couple years ago I decided $45 was worth it if I only needed to do it once a year. You won't regret it, and you don't have to install it.
Click to expand...
Click to collapse
I replace about 3 screen protectors a year (bought from amazon clear ones, 3 for $1.99). Other than a little rainbow effect when the screen is off, no regrets looks just like glass. I've been through many protectors before (ridiculously many on my first 'smartphones' rip moto ming, touchpro 1&2) but I can't justify the cost anymore, I'd rather have none (since I change my device every 8-12 months).
Sent from my HTC One X using xda app-developers app

I went with ghost armor myself, they installed for like 22 bucks.
No issues to report.
WR
Sent by WR's O/C'd One-XL on CR-V

Npsacobra said:
The best investment for my smartphone has been Ghost Armor. I have spent so much money on packs of screen protectors. A couple years ago I decided $45 was worth it if I only needed to do it once a year. You won't regret it, and you don't have to install it.
Click to expand...
Click to collapse
Screen protectors that come in packs are crap. The higher quality kind that cost $15 or so (Skinomi, Zag, etc) are in a different class. I've had a Skinomi on my One X since release (May), and one on my Flyer for almost a year and a half. Both are still looking great.
Sent from my HTC One X using xda app-developers app

I've never used a screen protector. Don't like the feel of them. This phone has great glass. I'm a mechanic and I keep my phone in my pocket all day (screen towards my leg of course) and not one scratch
Sent from my HTC One XL using xda app-developers app

I use Xtremeguard. Wet application and every time I get a perfect install. No bubbles no particles.
Sent from my HTC One XL using Tapatalk 2

charlieb620 said:
I use Xtremeguard. Wet application and every time I get a perfect install. No bubbles no particles.
Sent from my HTC One XL using Tapatalk 2
Click to expand...
Click to collapse
Was gonna say the same bout my Zagg...love it! Wet application and a squeegee, works perfect every time. The wet app also can aide with alignment if you don't get it just right, you can still move it before you squeegee.
Sent from my HTC One XL using xda premium

Not sure if this is still relevant, but I will put a vote for Ghost Armor as well. I have it for all my devices and it's like there's nothing there. Crystal clear and screen responsiveness is great. Had Zagg before and the orange peel feel and stickiness made me remove it. Those cheap packs aren't great either, they scratch up very very quickly.

Related

htc desire screen protectors

Hi, has anyone on here ever managed to stick a screen protector on their desire without air bubbles underneath? I must have gone through at least six and still can't bloody do it..
Sent from my HTC Desire using XDA Premium App
Whiskeybreath said:
Hi, has anyone on here ever managed to stick a screen protector on their desire without air bubbles underneath? I must have gone through at least six and still can't bloody do it..
Click to expand...
Click to collapse
Yes, it's quite simple once you figure it out. Make sure you place on as flat as possible and before you take the second protector film off smooth it down onto the screen slowly and use an applicator to smooth it on slowly. If you don't have an applicator just use a credit card.
It does take some practice though
I tried some screen protectors, but for me the Zagg Invisibleshield is the no.1
Easy to put on and managed to put it on without any bubbles (2 times).
davebugyi said:
I tried some screen protectors, but for me the Zagg Invisibleshield is the no.1
Easy to put on and managed to put it on without any bubbles (2 times).
Click to expand...
Click to collapse
Not cheap though. Had a look at Amazon and they're expensive and the reviews aren't too good either.
I have put quite a few screen protectors on- for family and friends, all of them are still bubble/dust free. All of these are the 'cheaply priced' one from ebay
The key things are :
Make sure the surrounding area where you are applying the protector is dust free- somewhere like a bathroom/shower room is best.
Clean the screen thoroughly with a lint-free cloth (usually provided with the protector).
Remove the 'number 1 plastic protector film only a bit at time, exposing as minimal as necessary, whilst using a credit card (with a thin lint free cloth over it) to press the the film from one end as you remove the protector film from othe other end.
As said above, keep the 'number 2 protector' on and smooth out any bubbles again with the credit card.
Peel off the 'number 2 protector'. Be careful, this sometimes 'raises' the actual protector off the screen and can allow dust to get in.
If any bubbles do appear after taking the number 2 protector off, use the credit card wrapped in a lint cloth to smooth them out (the cloth will of course prevent scratches).
Sometimes, dust can get in whilst you are applying. You WILL need to remove the protector and wash it thoroughly under running water.
I have had to do this a few times. Do not dry the protector with anything; you can actually apply it on wet (much like car window tint). You can squeeze out any excessive water out to the edge, again with the credit card. Just have another piece of cloth ready to absorb the excess and avoid getting it in the speaker.
Any Matt protector for suggestion??
vmax007 said:
Any Matt protector for suggestion??
Click to expand...
Click to collapse
Try these on ebay.
U use a credit card its more easier and then I push the big air bubbles out .. it doesn't matter if there are a couple of small air bubbles as they will fix themselves
Sent from my HTC Desire using XDA App
xybadog said:
Try these on ebay.
Click to expand...
Click to collapse
How resistant to scratches are these?
My current one is ok, but has got scratched pretty quickly.
reaper7881 said:
U use a credit card its more easier and then I push the big air bubbles out .. it doesn't matter if there are a couple of small air bubbles as they will fix themselves
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
Yes with CC it's more easier and if you do it right than you will not have bubbles
BluNoze said:
How resistant to scratches are these?
My current one is ok, but has got scratched pretty quickly.
Click to expand...
Click to collapse
Pretty good. I've had no scratches at all.
screen protectors are a must i think
xybadog said:
Pretty good. I've had no scratches at all.
Click to expand...
Click to collapse
Thanks, I'm now off shopping!
You could also try:
http://www.amazon.co.uk/FoliX-FX-CLEAR-screen-protector-Desire/dp/B003IMVJ2K/ref=sr_1_1?ie=UTF8&qid=1313400394&sr=8-1
It fits very good and keeps your display scratch free
I bought a pack of 3 on ebay and they work great, the touch sensitivity seems fine with it on.
Cost 99 cents.
Sent from my HTC Desire using XDA App
I have been using my Desire for about 13 months till now and I always carry it in my pocket.
I do notuse any screen protectiona and I still have not a single scratch untill now...I dunno if the protective screen is really necessary.
I wish I'd fitted a screen protector. I keep my Desire in a pouch but still managed to scratch the screen. Only a small one, but it still annoys me!
I always used cheap ones from ebay, even the ones sold with my hard-cases.
Here's i do (method found here on xda) : just take a warm/hot shower if there's "water" on the mirror, then you're good to go as the dust will be on the floor.
Then you just have to use the method here:
http://forum.xda-developers.com/showpost.php?p=16239021&postcount=5
I have my desire since 8 months ago without any protection and the screen is perfect, as the first day. No matter if you carry anything made of metal in the same pocket your desire is. It's almost unscratchable
I find that screen protectors dull the look of the screen somewhat. Just take care not to carry coins or keys in the pocket along with the phone.

Good screen protectors?

Can anyone recommend a good brand of screen protector? I went with case mate, as I had one on my desire HD and was very pleased with it - it fitted great and even after a year it still had plenty of life in it.
However the one that turned up for my sensation is rubbish, it only covers the LCD area - no protection over the capacitive buttons, and I keep catching the top when swiping the notification bar, so it's lifting up already.
Ideally I'm after one that will cover the whole screen, and isn't cheap and nasty.
chrisund123 said:
Can anyone recommend a good brand of screen protector? I went with case mate, as I had one on my desire HD and was very pleased with it - it fitted great and even after a year it still had plenty of life in it.
However the one that turned up for my sensation is rubbish, it only covers the LCD area - no protection over the capacitive buttons, and I keep catching the top when swiping the notification bar, so it's lifting up already.
Ideally I'm after one that will cover the whole screen, and isn't cheap and nasty.
Click to expand...
Click to collapse
I have the OEM HTC ones I got from Expansys. You get two of them. I don't remember how much they cost though. I think you can get them through htcpedia.com as well.
http://www.expansys.com/htc-sensation-screen-protector-sp-p540-2-pieces-retail-pack-218032/
Didn't realise HTC did ones, will definitely check them out! Thanks for the heads up.
chrisund123 said:
Didn't realise HTC did ones, will definitely check them out! Thanks for the heads up.
Click to expand...
Click to collapse
They fit pretty exact too FYI. Any mm off and you gotta redo the stinkin thing lol. It took me a good 20 mins to place it on the way I want it. I mean if you are off, you will get some bubbles in the corners, but they fit the entire screen. There's a write up in this section back when the Senny first came out and everyone was clamoring in which screen protector to get. Some like others, I am happy with the OEM ones. I still have it on to this day. I have one hairline scratch from keys that can be seen in certain angles, but other than that, the protector is great IMO.
GL.
Cool, just bought a set from eBay. Can't be any worse than this one I'm usin now lol.
i personally like the the invisibleSHIELD by ZAGG theyre pretty good in quality and last a long time now with any screen rotector as you know with time it will get really scratched with use but you should try these maybe youll like them they usually range anywhere from.. 0.99 to 3.99 fir a pack just look around ebay amazon... etc etc
meckanoid said:
i personally like the the invisibleSHIELD by ZAGG theyre pretty good in quality and last a long time now with any screen rotector as you know with time it will get really scratched with use but you should try these maybe youll like them they usually range anywhere from.. 0.99 to 3.99 fir a pack just look around ebay amazon... etc etc
Click to expand...
Click to collapse
I like Zagg, but I tried it back for my ol Nexus One and the outer skin/protector was nice, but to me the screen protector was too hazy for me and also a little tacky for my taste. Did they change the material for the protector?
well to tell you the truth i think theyre material might have improved a tad bit in quality but its like everything it does wear out eventually with time but i can understand the hazy part it does tend to be a little bit a problem for me
Best thing is still using no protector. Tried several and always get the feeling my touch is less responsive.
Sent from my HTC Sensation XE with Beats Audio Z715e using xda premium
i bought the iprotect crytalclear,
the distance from the corner to the screen protector is quite big (picture added) sometimes your finger gets stock, if you try to pull down the notification bar or using swipepad
i probally would buy another one
Well the HTC screen protectors (2 pack) arrived today, and again I'm slightly disappointed. On the plus side they are lovely and clear, and cover the whole of the screen. It's also very thin, so doesn't feel like its hampering the touch input at all (although my previous case mate screen protectors were thicker I never felt they effected the input either).
The biggest downside was that because they are so thin, they're near impossible to fit. After carefully peeling off the backing, you just cant hold the thing. It Took me forever to apply the first one, and subsequently it had one bit of dust trapped under it in the middle of the screen. Not much, but I'm a perfectionist! So one down, one to go... I peeled it off and tried again, this time I was rewarded with two specs of dust... But they were over the capacitive buttons so I'm willing to live with that.
The other problem I had was that the screen protectors were glued onto the packaging and if I'd just pulled them off they would have creased and been ruined. In the end I cut them off gently by sliding a sharp knife underneath them.
So, in conclusion I have a semi decent fitting screen protector on but I won't be buying these again when it reaches the end of its life.
I would highly recommend the Skinomi Techskin. I use them on all of my devices. Same concept as Zagg but they are a little thinner and the screen still retains the 'glass' feel. For me the Zagg is a bit too much and my finger drags on the screen at times with it.
The fit on the Sensation is perfect and installation isn't too difficult.
chrisund123 said:
Well the HTC screen protectors (2 pack) arrived today, and again I'm slightly disappointed. On the plus side they are lovely and clear, and cover the whole of the screen. It's also very thin, so doesn't feel like its hampering the touch input at all (although my previous case mate screen protectors were thicker I never felt they effected the input either).
The biggest downside was that because they are so thin, they're near impossible to fit. After carefully peeling off the backing, you just cant hold the thing. It Took me forever to apply the first one, and subsequently it had one bit of dust trapped under it in the middle of the screen. Not much, but I'm a perfectionist! So one down, one to go... I peeled it off and tried again, this time I was rewarded with two specs of dust... But they were over the capacitive buttons so I'm willing to live with that.
The other problem I had was that the screen protectors were glued onto the packaging and if I'd just pulled them off they would have creased and been ruined. In the end I cut them off gently by sliding a sharp knife underneath them.
So, in conclusion I have a semi decent fitting screen protector on but I won't be buying these again when it reaches the end of its life.
Click to expand...
Click to collapse
Have you tried the tape trick for the dust? It's always best to put screen protectors on somewhere dust free like the bathroom. Always wash your hands before as well.
And I myself took a good 20 mins putting on mine because of the exact fit of them. I had to take off and reapply like 7 times. But I got the hang of it as of now. And if you are greeted with specks of dust, get a piece of scotch tape. Lift one end of the screen protector with another piece of scotch tape that is closest to your speck(s) and then use the scotch tape in your other hand to stick the particles from the screen protector or screen itself. It takes some finesse but it can be done, I have confidence in you! :victory: lol
Here's a more recent pic of the HTC screen protector. I do have minor bubbling on the corners because I just redid the Screen protector to align correctly because the case I have on which I just got kept lifting it. Reason being, the screen protector was off to the right a bit lol. I can live with the minor bubbling on the corners and you can't see the bubbles when looking straight at it either. See the second pic
kpjimmy said:
Have you tried the tape trick for the dust? It's always best to put screen protectors on somewhere dust free like the bathroom. Always wash your hands before as well.
And I myself took a good 20 mins putting on mine because of the exact fit of them. I had to take off and reapply like 7 times. But I got the hang of it as of now. And if you are greeted with specks of dust, get a piece of scotch tape. Lift one end of the screen protector with another piece of scotch tape that is closest to your speck(s) and then use the scotch tape in your other hand to stick the particles from the screen protector or screen itself. It takes some finesse but it can be done, I have confidence in you! :victory: lol
Here's a more recent pic of the HTC screen protector. I do have minor bubbling on the corners because I just redid the Screen protector to align correctly because the case I have on which I just got kept lifting it. Reason being, the screen protector was off to the right a bit lol. I can live with the minor bubbling on the corners and you can't see the bubbles when looking straight at it either. See the second pic
Click to expand...
Click to collapse
woww, what a great lockscreen!!
Where didi you get it from?
piratashitzu said:
woww, what a great lockscreen!!
Where didi you get it from?
Click to expand...
Click to collapse
Thanks, I created it with the inspiration from cvdesignlab from mycolorscreen. The lockscreen is widgetlocker which consists of three UCCW widgets, which I created the call/email/text(each has hotspots to the corresponding app) and battery charging widget, the weather widget in the middle reporting on my local weather, which has a hotspot, when pressed, goes to my weather app of choice.
And a "hotspot" is a term by the app creator, meaning when created, the corresponding hotspot will auto open any app you direct using the UCCW app.
And the time is a simple edit to an existing clock found in the UCCW thread made by the author of the app. Oh and the calendar right below the weather is my minimalistic text widget I created because I almost missed a dental appt a few weeks ago lol
There are a bit of parts to it but it has all the info I need at first glance without needing to get "into" the phone.
i use Ishieldz, and its the best screen protector i've had!
Skinomi as many people have mention about
Sent w/ HTC Sensation 4G (Z710a) XDA Premium
ebay these are the ones i use dont last long but they are good
If you have trouble getting the edges to settle. Apply the screen protector as best you can. Then grab a hair drier, set it to hot and from about 12 inches warm up the phone. Keep moving the hair dryer as you can burn yourself. Keep doing that while working the edges down with your other hand. I have big hands so I can hold the phone in my hand and use my thumb. Eventually they will stick.
I too have BS ebay screen protectors and the reason it covers only the LCD area and not the entire face is because of the curvature at the edges.
I haven`t been using anything for almost a year and my screen is perfect...

XO, BSE, SGP or something else?

Which will be the best screen protector? Which is the best based off your past experiences?
I am in the UK and willing to order from the US but I'm not sure which is the best. I still need to sell my unused XO from my Galaxy Nexus
UK here too. I've tried Zagg, Skinomi and BSE in the past. BSE are undoubtedly the best of those 3
I'm having trouble deciding on a screen protector as well, but I've always gotten the InvisibleSHIELD. I mostly do so because I can buy the full body skin (or any of the kits they sell), then take it to the mall and they'll apply it all free of charge. If they screw up (they never do), then they'll give me a brand new one. If it gets all scratched up, gets a bubble, or ANYTHING, I just take it to the mall (without a receipt or box or anything) and they'll replace it all totally free. If I screw up applying other protectors, I don't want to have to ship it back and wait for a new one. While others do sometimes have kiosks (from what I've heard), I have yet to actually see one. I've never minded the whole orange peel thing personally, so it doesn't really affect my decision by much. I just love their warranty in combination with the kiosks. It makes it very easy.
Another thing I'm worried about is this: If I get the full body kit, can I still use a case, or will the friction of putting the case on be enough to screw it up? Has anyone had this issue? Should I just get a front and back kit instead? I plan on using case with the phone to protect from drops and what not, I usually just get a Speck Candy Shell or something, although I'm a huge fan of the LifeProof cases since they look good and offer great protection (either or not they'll make a Nexus 4 case is a different story, I suppose).
BSE all the way
...already on order.
Sent from my HTC One X using Tapatalk 2
How is the touch feeling of BSE ? Similar to glass or sticky like Zagg ?
They are all very similar. I usually go with Skinomi because of the price. I already pre-ordered it off Amazon.
I love XO skins. I just ordered one for the Nexus 4.
Sent from my GSM Galaxy Nexus using Tapatalk 2
sgp steinheil is the best it feels smooth like its not there but is extremly hard my nexus s has deep scratches on the screen protector that havent even touched the glass
The best screen protector... is you! Don't slide your phone across the table, don't drop it, and don't put it in your pocket with potentially "dangerous" things (pens, keys, etc.), and all should be ok
I'm not a big fan of screen protectors; I like to have full touch control with my screen, and would rather not worry about what was the cause of my screen not registering that input (was it the screen protector, or just the phone itself?).
Well I don't know what kind of screen protectors you've been using but the ones I've used don't have any effect on the sensitivity of the touchscreen. I am careful with my stuff anyway but the small hairline scratches really annoy/bother me for some reason.
espionage724 said:
The best screen protector... is you! Don't slide your phone across the table, don't drop it, and don't put it in your pocket with potentially "dangerous" things (pens, keys, etc.), and all should be ok
I'm not a big fan of screen protectors; I like to have full touch control with my screen, and would rather not worry about what was the cause of my screen not registering that input (was it the screen protector, or just the phone itself?).
Click to expand...
Click to collapse
Protection is absolutely necessary for me since I work in construction/maintenance
I personally love steinheil! ( SGP )
I'm going for Ghost Armor actually.
Your question is the best for the N4. But nobody has any of these screen protectors made for the N4, and only a couple really lucky people have the phone. None of the opinions in your poll are actually based on experience with this device and this protector. Wait until people start getting them and then look at reviews.
chrisjcks said:
BSE all the way
...already on order.
Sent from my HTC One X using Tapatalk 2
Click to expand...
Click to collapse
where you order it??? Icant decide
I'm going with BSE because I've heard a lot of good things about them. Plus I like the wet apply idea. I've ALWAYS had problems with the sticky dry screen protectors. One little piece of fuzz or dust and you have annoying bubbles every where. And over time bits of fuzz/lint get up around the corners and it slowly starts to peel off.
espionage724 said:
The best screen protector... is you! Don't slide your phone across the table, don't drop it, and don't put it in your pocket with potentially "dangerous" things (pens, keys, etc.), and all should be ok
I'm not a big fan of screen protectors; I like to have full touch control with my screen, and would rather not worry about what was the cause of my screen not registering that input (was it the screen protector, or just the phone itself?).
Click to expand...
Click to collapse
I'm sorry, but it doesn't matter what you do. Before you know it you'll be in direct sunlight and you'll see all sorts of small little scratches. Then later, you'll always know they're there. I'm OCD about it. I can't stand having the tiny little scratches because I want my phone to stay new. I think the first time you put a phone in your pocket, it gets some sort of tiny little scratch from something.. then over time they build up and make the screen look aweful. Plus its funny you say pens and keys because those things wont scratch gorilla glass. I've tired a key on my old Atrix and nothing comes from it. It's actually particles of dust that have maybe glass or something else hard, or sand.
I want a dry applied one and really wanna know if a dry one can cover the entire screen of Nexus 4.......
XO Skins are the ones I have been using for a few years now. From what I have read xo and sgp are the only ones without orange peel. I don't know how the sgp do on curves though I posted a review of xo in my signature when I had the samsung google nexus
BravoMotorola said:
Plus its funny you say pens and keys because those things wont scratch gorilla glass. I've tired a key on my old Atrix and nothing comes from it. It's actually particles of dust that have maybe glass or something else hard, or sand.
Click to expand...
Click to collapse
Exactly, all these videos of people dropping coins/keys on the phone are pointless. swipe over that phone just once with sand paper and its all over...
Emama said:
I want a dry applied one and really wanna know if a dry one can cover the entire screen of Nexus 4.......
Click to expand...
Click to collapse
Me too. I ordered some of these:
http://www.protectionfilms24.com/article/vikuiti-adqc27-screen-protector-google-nexus-4-126198.html
They were great on my G2 but it has a flat screen. I'll let people know after I get them. I will be disappointed if they don't properly stay on the screen.
What is this "Orange peel" that people are referring to?

Is it true that phones with gorilla glass don't need screen protectors?

I bought my Asus Padfone 2 a week ago when it was just launched in Jakarta, Indonesia (which happen to be where I live). The product is so new that there isn't any accessories for Padfone 2 yet, not a cases, sleeves, not even a screen protector.
However, one of Asus representative has pointed out that the sleeve will be ready within mid-April. And as for the screen protector, he told me I don't need one since Padfone 2 is already covered with gorilla glass. He was so convinced that no matter what I'd do with my phone I wouldn't even close in hurting the screen. I need to know whether is this statement true, I want the best protection for phone.
Sent from my PadFone 2 using xda app-developers app
No thats BS. Gorilla Glass is scratch resistant, NOT scratch proof
So it means that it is still a good idea to use a screen protector?
Sent from my PadFone 2 using xda app-developers app
It scratches, my galaxy note 2 has a nice 0.7cm scratch on it
Sent from my GT-N7100 using xda app-developers app
Anggrian said:
So it means that it is still a good idea to use a screen protector?
Sent from my PadFone 2 using xda app-developers app
Click to expand...
Click to collapse
Screen protector for phone is definitely needed as there is no total scratch proof screen in the market right now.
Its always better to have your screen protected with any sort of screenguard.. if it gets scratched u replace that screenguard and its shiny again until it got scratched pretty badly
Take my opinion. Don't use screen protectors. They are gonna hold back the screen from showing it's complete potential ( the colors, touch sensitivity, blah blah) unless the screen protector you use is exceptionally good.
I have been using ma phone without any screen protector for more than a year now. No scratch, Noffin. ( gorilla glass can handle em)
But if you have the screen scratching against stuff like keys ( while in pocket) or somethin , consider putting one.
Or You could get a flip cover to protect it.
It's my opinion. You're the judge
- - - - - - - - - - - - - - - - - - - - - - - - - -
LIFE!
IT'S WHAT YOU MAKE OUT OF IT!
It's not scratch proof. Sand is harder than it so even a single grain in your pocket can scratch your screen (as all the little edge scratches on my One X's gorilla glass screen can attest to).
On the other hand, even my keys can't scratch it.
Coming up on three years my Samsung Galaxy S' gorilla glass 1 hasn't seen a single scratch.
You won't need it if you just get used to some simple ways of using it.
Don't stuff your pockets with stuff, a bank card can lock a grain of sand between it and the phone, a pocket itself won't do that.
Don't put your phone face down on most surfaces.
Stuff like that.
I tried a screen protector, it sucked, had to rip it off, violently and with a vengeance.
I've never been particularly careful with my phone, but I have some very basic habits that probably helps.
The sides of my phone is banged up btw, I've manhandled it quite a lot, and the camera glass is far from pristine, just goes to show the side you put it down etc matters a lot.
Sent from my GT-I9000 using xda premium
Hr Kristian said:
Coming up on three years my Samsung Galaxy S' gorilla glass 1 hasn't seen a single scratch.
You won't need it if you just get used to some simple ways of using it.
Don't stuff your pockets with stuff, a bank card can lock a grain of sand between it and the phone, a pocket itself won't do that.
Don't put your phone face down on most surfaces.
Stuff like that.
I tried a screen protector, it sucked, had to rip it off, violently and with a vengeance.
I've never been particularly careful with my phone, but I have some very basic habits that probably helps.
The sides of my phone is banged up btw, I've manhandled it quite a lot, and the camera glass is far from pristine, just goes to show the side you put it down etc matters a lot.
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
+1 to this. Sand is pretty much the only (common) material that can scratch gorilla glass. I haven't used a screen protector on any of my gorilla glass equipped devices in years, and not a single one has a scratch. Granted, I'm pretty careful with my gadgets, but I keep my razr maxx in the same pocket as my keys every day without so much as a hairline scratch. Here's a good thread for some additional info on gorilla glass:
http://forum.xda-developers.com/showthread.php?t=1866049
So far nothing had scratched it, including two cats. But I do keep it in a wallet top type case when it's in my pocket.
Send from my Samsung Galaxy S3 using Tapatalk 2
It require screen guard just to prevent scratches
Gorilla glass is meant for rough use
Sent from my HTC Explorer
It has been almost 2 years and haven't had a single scratch on my i777 'cuz I have the "screen protector" on.
I'm using kitchen shrink wrap (from Costco if anyone interest), wrap it around the phone, anytime I need to use, I just un-wrap it and when I'm done, I re-wrap it
I stuck the tape and put a cover, because it often drops the phone. I think, no GorillaGlass could not bear it.
I would not use a screen protector even if you paid me... (well, maybe, depending on HOW MUCH )
I tried it on my wife's phones and my two daughters' phones, and I was never able to place the protector without air bubbles underneath. And I cannot stand them. Even without bubbles, they lower the screen readability and clarity.
I think that protectors make sense only for people with particular ways of handling their phones. I always keep my phone in the same pocket, never put anything else there, and I never had a scratch. My wife, though, is able to scratch any phone in her handbag, even with a flip cover or a case on it, as she keeps it with keys, coins and everything else she is able to carry with her. No Gorilla Glass helped her phones, either
votinh said:
It has been almost 2 years and haven't had a single scratch on my i777 'cuz I have the "screen protector" on.
I'm using kitchen shrink wrap (from Costco if anyone interest), wrap it around the phone, anytime I need to use, I just un-wrap it and when I'm done, I re-wrap it
Click to expand...
Click to collapse
Kitchen wrap!?
Sent from my ZTE V970 using Xparent Red Tapatalk 2
jerzyjerzy said:
I would not use a screen protector even if you paid me... (well, maybe, depending on HOW MUCH )
I tried it on my wife's phones and my two daughters' phones, and I was never able to place the protector without air bubbles underneath. And I cannot stand them. Even without bubbles, they lower the screen readability and clarity.
I think that protectors make sense only for people with particular ways of handling their phones. I always keep my phone in the same pocket, never put anything else there, and I never had a scratch. My wife, though, is able to scratch any phone in her handbag, even with a flip cover or a case on it, as she keeps it with keys, coins and everything else she is able to carry with her. No Gorilla Glass helped her phones, either
Click to expand...
Click to collapse
Lol, thats funny.
I would put a screen protector on it. I have had a couple phones with Gorilla Glass and have scratched them. While nice resistance to scratches it still happens if your not careful.
Every phone I have ever seen with Gorilla Glass and Gorilla Glass 2 have had scratches (when not using screen protector).
I get that it is scratch resistant, but I personally never use a phone without a screen protector.
As for bubbles, I use the matte ones and never get bubbles. I have one on my Nexus 4 right now and it still looks as vibrant and awesome as ever with no bubbles or anything.
I have a tablet with a GG screen that I got used from a friend and there are a number of session scratches or it - they don't bother me too much, especially now that I've put a screen protector on it, but if it's a device I buy new I would definitely have one on from the start (like I have with my phone and others).
Sent from my SGH-T999 using Tapatalk 2
Hr Kristian said:
Coming up on three years my Samsung Galaxy S' gorilla glass 1 hasn't seen a single scratch.
You won't need it if you just get used to some simple ways of using it.
Don't stuff your pockets with stuff, a bank card can lock a grain of sand between it and the phone, a pocket itself won't do that.
Don't put your phone face down on most surfaces.
Stuff like that.
I tried a screen protector, it sucked, had to rip it off, violently and with a vengeance.
I've never been particularly careful with my phone, but I have some very basic habits that probably helps.
The sides of my phone is banged up btw, I've manhandled it quite a lot, and the camera glass is far from pristine, just goes to show the side you put it down etc matters a lot.
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
+1
I don't care who says what, from what I've experienced GG1 is much more scratch proof that GG2. Like you, my SGS 1's screen which is now my back up phone, is flawless. The thing is an utter tank and I believe I'd have to really work to put a scratch on it. Yet I've had 3 other phones since with GG2 and every single one of them has gotten scratched from simply being in my pocket.
IMO, GG2 sucks.

Bodyguardz Pure Tempered Glass is a "GO" with NO Halo.

Just installed the Bodyguardz Pure Tempered Glass screen protector with the Express Align tray on my white Galaxy S6.
It is 100% Halo Free and went on pretty much perfect. Not sure how it would come out on the black S6 but I'm not complaining about mine.
I have installed tons of screen protector over the years and this is my first Bodyguardz. The Express Align tray works perfect and I highly recommend it.
Just made sure you push real hard and wait for the protector to adhere to the phone before trying to remove the Express Align tray.
Well worth the $35.00 from the AT&T Store. I also have the Zagg as a back up but don't think I'll be needing it right now.
It's a little short on the top and bottom but that is how they avoid the halo.
I'm sure Bodyguardz will be offering their "Crown" for the S6 Pure in the near future.
I also managed to installed it without getting any junk under the screen
(the spots in pics are only in the pics, not under glass).
Here are a few pictures.
Can you share any tips that help to prevent dust or lint get under the screen during installation?
AirSupply said:
Can you share any tips that help to prevent dust or lint get under the screen during installation?
Click to expand...
Click to collapse
Just a real clean area and have a nice bright light over the area you are working on. Also a can of compressed air comes in handy. Soft Micro Fiber rags. I use the Giottos Large Rocket Blower ( used with my cameras). I believe that they are only like $10. and something you will always use as I do. Bodyguardz is coming out with their "Crown" for the S6 to fill in the spaces.
http://www.amazon.com/Giottos-Rocket-Blaster-Blower-Large/dp/B00017LSPI
My tip for a clean and lint free installation. Go into your bathroom. Turn on the shower with hot water. Let it get nice and steamy. It will settle the dust in the room and then clean and apply the screen protector. Sounds crazy but been doing this for years and never get anything under my screen protectors.
c_86 said:
My tip for a clean and lint free installation. Go into your bathroom. Turn on the shower with hot water. Let it get nice and steamy. It will settle the dust in the room and then clean and apply the screen protector. Sounds crazy but been doing this for years and never get anything under my screen protectors.
Click to expand...
Click to collapse
+1
I've been doing this for a while to.
Sent from my SM-G920V using XDA Free mobile app
c_86 said:
My tip for a clean and lint free installation. Go into your bathroom. Turn on the shower with hot water. Let it get nice and steamy. It will settle the dust in the room and then clean and apply the screen protector. Sounds crazy but been doing this for years and never get anything under my screen protectors.
Click to expand...
Click to collapse
That depends on your location actually. I also do the same but Moscow is very very dusty city and I live near the highway... so even after the hot shower I can see particles floating))) Usually I buy couple of protectors so succeed with at least one, that is not an option with a 35 bucks SP though )
Another vote for the steamy shower route.
I'm tempted to pull this one off and try the Zagg I have sitting here.
If it was not so short on the top & bottom it would be perfect.

Categories

Resources