Database Info

Phantom Skinz Full Body Set

Recently received the Phantom Skinz Full Body set and have gone through installation.
Here's the breakdown:
The Pros:
- The Screen Skin looks good and feels good. The extra drag vs. the stock glass is slight and the overall clarity is very good (doesn't have any noticeable detraction from the crisp, contrasty screen).
- The main screen skin and front overlays were fairly easy to apply and once dried have a very nice unobtrusive look
- Comes with 2 sets of skins
The Cons:
- included directions are WAY OFF from the install video on their site. Soaking times, how long to let it sit and dry, etc...
- Edge bubbling on every corner for the back overlays. Directions say to "cup the corner with palms and hold 30 seconds", but I've done it over and over again and they keep popping off after a short while
- A WHOLE LOT of wet work involved in applying these skins. Application involves soaking the skin in water first, then (as instructed) with your fingers fully wet, take the wet skin and put it wet onto the phone and then use the included credit card shaped "squeegy" to push out the extra water. Not so much a big deal for the screen skin, but getting that much water around and near the audio/mic/power and such ports while putting on the body skins is asking for trouble.
Final Thoughts
I imagine in some small (heck, maybe in large) part, the corner bubbling issue is due to me not applying the skin properly. But I'm not some clueless granny that doesn't know the difference between a mouse and a blackberry and the included instructions are vague in important places and almost completely different than the video instructions shown at their website (for example; The included instructions say to use warm water WITH SOAP)
Bottom line: Stick with just the screen skin, skip the full body.

The online video instructions say to use soap as well. IIRC, she said that at their facility, they use one drop of Johnson's baby shampoo per 32 oz of water.

I would avoid Phantom Skinz altogether. Here's the review I posted about my experience with one of them on my Moto Droid in the skins topic.
Phantom Skinz
I got a PS for my Moto Droid because I didn't want something as grippy as the Zagg. PS had great reviews and came with 2 full sets for the price of 1 zagg with 33% off on top of that ($16.50 in the end). The first installation of the screen got some dust and fuzz under it since I was OCD about getting it perfect, so I emailed them and they sent me a replacement for free no questions asked. I know it did come with two sets of protectors but I wanted to keep one as a backup still. Second installation was perfect. No dirt, dust, fuzz or finger prints. Screen was perfectly smooth (no orange peel) and the touch felt almost the same as the glass. Put the rest of the body on without a problem as well with just a few bubbles in some of the tougher spots. I was very impressed, but now a month later I am not so much. After daily use taking my phone in and out of my pocket (sometimes shared with keys) the skin is filled with knicks and wrinkles. While the film may not technically scratch, it is vulnerable to indentations and air bubbles forming which do not "self heal". Instead of scratching, it seems like the skin stretches in place, resulting in a wrinkle/groove with little marks that look like air bubbles underneath. Not only does it make the screen look dirty, but you feel them while using the touch screen. As I write this, I just dug my finger nail into the screen and tried to scratch it, leaving another permanent groove. Needless to say, I will be taking off the PS and throwing it in the trash. The rest of the body has surprisingly stayed pretty clean of wrinkles, so it may have something to do with its application on glass. I will put some pictures up when I get the chance this evening. Overall, I would not recommend PhantomSkinz. It looked and felt great for a couple weeks, but now every day I am finding more and more knicks and wrinkles and that is just unacceptable compared to others. This skin is NOT scratch proof like other comparable skins on the market! However, I will commend their customer service for being very helpful and quick to reply.
And here a pictures of what it looks like:
h ttp://forum.xda-developers.com/showpost.php?p=5415251&postcount=44
(remove the space after the h, I can't post links yet)
Bottom line here as that they are smoother than other brands but scratch pretty easily. You should check back in on this topic in a month or two and see if your opinion has changed.

I applied the full body skin about a week ago. There's definitely a lot of water involved but most of the danger can be avoided with some caution. I used Q-tips to do a lot of the credit card work around the edges so that it soaked up the water it pushed out.
A good trick for the corners is to use some sealant/piping tape to hold them down. This is a lot better than using your hand for 30 seconds, and you can leave it there for as long as you want (I left the tape on mine for 2 days since I wasn't going anywhere that I needed to show off my phone, I figured why not? Now my corners are perfect).
So far I like PhantomSkinz because it wraps the corners a little better than the other skins. Bodyguardz is a little better in clarity and material. InvisibleShield has too much of the orange peel effect. Haven't had a chance to try BestSkinsEver.
As for detonation's review, it's too early for me to tell if I'll have the same problems, but I agree that the material doesn't seem on par with InvisibleShield or BodyGuardz. But since I still used the carrying case and treat my phone with much care even with the skin on, I don't think it'll be too much of a problem.

I recently got the phantom skinz full body set, after I read the instructions I thought that there was no way I was applying wet/soapy film to my N1, it just doesn't make any sense. Water/soap plus electronics? Its a recipe for disaster, besides the fact that I suck at arts and crafts type stuff just like this. I would imagine I would get water somewhere inside the device, and knowing me it would reach the many water detectors in the phone. It doesn't seem worth it, so I applied just the screen part sans water/soap, and needless to say it sucked big time, even when I got all the bubbles out.. it had a terrible gray haze on parts of the screen it was bad (maybe due to not using the water/soap method). Can any one suggest just a simple screen protector that doesn't' require to dunk your device in water?

boxmander said:
I recently got the phantom skinz full body set, after I read the instructions I thought that there was no way I was applying wet/soapy film to my N1, it just doesn't make any sense. Water/soap plus electronics? Its a recipe for disaster, besides the fact that I suck at arts and crafts type stuff just like this. I would imagine I would get water somewhere inside the device, and knowing me it would reach the many water detectors in the phone. It doesn't seem worth it, so I applied just the screen part sans water/soap, and needless to say it sucked big time, even when I got all the bubbles out.. it had a terrible gray haze on parts of the screen it was bad (maybe due to not using the water/soap method). Can any one suggest just a simple screen protector that doesn't' require to dunk your device in water?
Click to expand...
Click to collapse
Dude... you BARELY have to use any water to get the screen to turn out right. Sorry you wasted your PS... but ask them for a replacement, and mail it to me! I do this **** with my eyes closed. It's really not rocket science, and you don't have to "dunk" your phone in water.

boxmander said:
I recently got the phantom skinz full body set, after I read the instructions I thought that there was no way I was applying wet/soapy film to my N1, it just doesn't make any sense. Water/soap plus electronics? Its a recipe for disaster, besides the fact that I suck at arts and crafts type stuff just like this. I would imagine I would get water somewhere inside the device, and knowing me it would reach the many water detectors in the phone. It doesn't seem worth it, so I applied just the screen part sans water/soap, and needless to say it sucked big time, even when I got all the bubbles out.. it had a terrible gray haze on parts of the screen it was bad (maybe due to not using the water/soap method). Can any one suggest just a simple screen protector that doesn't' require to dunk your device in water?
Click to expand...
Click to collapse
you didnt follow the instructions and it didnt work well for you? gtfo

boxmander said:
I recently got the phantom skinz full body set, after I read the instructions I thought that there was no way I was applying wet/soapy film to my N1, it just doesn't make any sense. Water/soap plus electronics? Its a recipe for disaster, besides the fact that I suck at arts and crafts type stuff just like this. I would imagine I would get water somewhere inside the device, and knowing me it would reach the many water detectors in the phone. It doesn't seem worth it, so I applied just the screen part sans water/soap, and needless to say it sucked big time, even when I got all the bubbles out.. it had a terrible gray haze on parts of the screen it was bad (maybe due to not using the water/soap method). Can any one suggest just a simple screen protector that doesn't' require to dunk your device in water?
Click to expand...
Click to collapse
Try clairivue or martin fields. Just do a google search since I can't post links yet.

typ_ex said:
you didnt follow the instructions and it didnt work well for you? gtfo
Click to expand...
Click to collapse
LOL! i agree. i have had no issues at all with my phantomskinz- both on the magic and now my nexus- i'll admit i do suck at installing them but what i do is get a bowl o water, put a few drops of baby shampoo in swich it around a bit, then dunk the piece in there- hold it over bowl until excess is removed then you can put it on device- the soap/water allows you to move it into position easily and helps squeegee the bubbles....
i wouldnt blame a product because you didnt follow their instructions how to install it...

I actually prefer the bowl of soapy water to the sprays that come with other skins. Submerging it ensures the entire skin is lubed up, and the small amounts of drips on the device is harmless. Just let it dry out overnight before turning it on.

I think Martins is completely over priced. I tried BSE and Phantom and all works great. Once dried it is practically invisible with only the slightest orange peel effect. I'm pretty OCD and it is minimal enough that it doesn't bother me. What does bother is that both of the screen protectors are slightly shorter than the screen.
As for applying the phantom and drowning in water as people are saying I don't do that. I've put on enough of these to know you only need a slight amount. I use a spray and just mist the backing so that it is enough to be able to adjust when putting on but not dripping with water. I use a cloth to absorb the water on the edges as I push the bubbles/excess water out. Fairly easy process. It just takes a slow hand and patience.

pongalong said:
A good trick for the corners is to use some sealant/piping tape to hold them down. This is a lot better than using your hand for 30 seconds, and you can leave it there for as long as you want (I left the tape on mine for 2 days since I wasn't going anywhere that I needed to show off my phone, I figured why not? Now my corners are perfect).
Click to expand...
Click to collapse
Ok I have to ask: what is sealant / piping tape? And where do you buy that? Home Depot? Bed, Bath and Beyond?

Paul22000 said:
Ok I have to ask: what is sealant / piping tape? And where do you buy that? Home Depot? Bed, Bath and Beyond?
Click to expand...
Click to collapse
Some might know it as teflon tape, thread seal tape or plumbers tape. It's a thin white non-adhesive tape that you use on pipes/hoses to make connections water tight. Home Depot would have it or any hardware store - it's pretty common. Just cut a few good length pieces and wrap your phone up like a mummy on the difficult spots. It works well because it's stretchy, conforms to shape and naturally adheres to the phone skin.

pongalong said:
Some might know it as teflon tape, thread seal tape or plumbers tape. It's a thin white non-adhesive tape that you use on pipes/hoses to make connections water tight. Home Depot would have it or any hardware store - it's pretty common. Just cut a few good length pieces and wrap your phone up like a mummy on the difficult spots. It works well because it's stretchy, conforms to shape and naturally adheres to the phone skin.
Click to expand...
Click to collapse
...and it's non-stick!

typ_ex said:
you didnt follow the instructions and it didnt work well for you? gtfo
Click to expand...
Click to collapse
Like I mentioned before, my application didn't work well cause I didn't follow the instructions. And I wasn't hating on PS, get a grip. Besides after some people posted about this topic I might give it another go, PS gave me two for one so I can redo it. Why are you here? Perhaps you should try posting things that are more constructive.

pongalong said:
Some might know it as teflon tape, thread seal tape or plumbers tape. It's a thin white non-adhesive tape that you use on pipes/hoses to make connections water tight. Home Depot would have it or any hardware store - it's pretty common. Just cut a few good length pieces and wrap your phone up like a mummy on the difficult spots. It works well because it's stretchy, conforms to shape and naturally adheres to the phone skin.
Click to expand...
Click to collapse
Interesting. I'll definitely get some. Thanks for the tip.
Hmm... I'm going to go to Home Depot to buy some kind of special tape I've never heard of to wrap up my phone like a mummy in order to prevent the corners from lifting on my phone's skin protector. Phone enthusiast or what?

Phantom does have the best skins by far...
The trick to installation to make it perfect:
Use the Johnson's/water mix as they advised.
Ignore all of their other directions.
Peel off the piece you want to apply. Dryly.
Dip your fingers in the water and apply it to the skin using your fingers.
Once both sides of the skin are wet, use your fingers as a squeegee to pull off any excess water.
Apply the skin to your phone. Keep the skin sitting on your phone in it's original shape.
Use your fingers, not the applicator card, to squeegee out the air bubbles. You don't need to apply very much pressure at all. The bubbles move around extremely easily.
Now, let the skin dry for about 2 minutes. Once you notice the skin starting to cling to the phone a little harder, grab the ends that you need to wrap around the phone and stretch them into place. This is the key step. Stretching it makes it stick so much better, the corners align perfectly with the phone when you do this, and all the gaps left between the skin pieces when you don't stretch it are gone. The skin has to be stretched to fit the phone, otherwise the pieces will all be a little to small and the corners will blow.
Repeat with the other pieces.
Enjoy your sexily phantom skinned N1.

anyone with pics of this case ?

I just wanted to comment about Phantom Skinz because I have had a really good experience with them and I am going to get another set from them as soon as they release it for the HD2!
I got Phantom Skinz for a Nano about a year ago and it has been awesome! I bought the PS retail (they have a location in my area) so I only got one set, but I did it myself with no problems. I had to take it off for a warranty replacement on the Nano and I put the same skin back on the new Nano and it looks just as good as it did on the first application. It's awesome that it can be taken off and put back on again using only water.
I got GA for my G1, but it is the worst product ever. I had it professionally installed at a Ghost Armor location because I wanted it to be perfect for my baby. But it didn't even last a month before it started peeling! GA can only be applied once with a special solution (thats what the GA salespeople told me) and it can't be fixed with water like Phantom Skinz. Phantom Skinz has never actually peeled like the GA did, but at least I could fix PS with water if I needed to!
I literally had the full body GA skin replaced 4 times in the course of a year because it peeled so bad and I am not just talking the corners! I did everything they told me to; keep the phone in a case so it doesnt rub in your pocket, keep any liquid of the phone (durr), don't leave the skin in prolonged sunlight, blah bla blah.
It was $35 for the original GA skin and installation and then they charged me $10 labor for the "free warranty replacement" every time I had the skin redone. Oh, and they changed the GA product for my phone 3 times out of the 4 I got it replaced and the changes never fixed any of the problems I had with the skin. GA also yellowed really bad and actually got progressively worse over the course of their " improved product revisions". The last time I had the G1 wrapped the skin was a pretty moderate yellow in about a week...
The salespeople sucked me in every time with leading me to believe the GA skin for the G1 was revised and the problems were fixed. I spent way too much money on their crappy ass product!
Ghost Armor is an awful product! Please just stay the hell away from them!

There is no need to submerge anything in any fluid. I have installed clear skins on many devices by using soapy water. I dont spray it on the phone, I spray a small mist on the protector before applying. Trust me there is not enough water to damage anything because as i push out the bubble I wipe the water.
If you are concerned about it then remove the battery and wait a day like the other people have suggested. once the process is complete the skin will need to settle for a few days before it looks good.
I used some spray that came with a skin before and I did not like it compared to the soapy water MIST.
I also do not use the skin on touch screens because my finger drags on it compared to other screen protectors that are designed to protect the screen.

Painting my Nexus One ((in progress))

Well I got seriously bored of the Battery cover and bottom piece. I was just never a fan of the bronze like tint to it.
I initially started with the Ol Touch Pro battery cover method using Rit Dye.
The results were great but it started running leaving my hands tinted =-(.
I placed an order for paint which arrived but was the wrong finish so Im awaiting the return shipment.
In the meantime I went ahead and started on the Battery Cover/Bottom panel with some left over paint I already had.
Im using Krylon Fusion but I may regret not switching to Duplicolor as there bonding is to plastics may be better. Im worried that the teflon coating of the pieces may mess up the finish.
Removing the bottom panel is a PAIN unless you have a pry tool. I highly suggest going to Ifixit.com and order a few of there tools if you make a habit of pryin open phones/electronics. They help out a bunch.
http://www.ifixit.com/Tools/Plastic-Opening-Tools/IF145-000
This is what I used for bottom panel.
Second problem was the little metal contacts. Fortunately I have no intention of getting a dock. They are too small to duct tape and was worried about removing them. If they are removable I may just do it after as scraping the paint off copper shouldnt be a big deal.
Masking the camera is a pain as the metal circle doesnt give one an indent to xacto blade smoothly. It was a bit of trial and error but definitely doable.
Anyways pics of coat one below. I wont continue until I get the right sandpaper and paint finish. Still tossed up between gloss and matte.
This was my original goal.
http://www.colorwarepc.com/p-216-nexus-one.aspx?2907=54726&2908=54787&2909=54877&2910=54955
I really like the black covers and the way it now matches the front paneling. I may not rip the rest apart to paint it white just yet.

Much prefer stock compared to that to be honest.
I know you're not done but the finish doesn't look to great.

Yeah the finish is nowhere near done. But the contrast the black creates is just alot better.
Already had someone ask me what phone I'm using ... in 11 months that's only happened twice.
Hopefully it'll look the way I intend it to.

wet sand, wet sand, wet sand
also make sure to use super high grit paper.
dont be afraid to wet sand the clear coat either...its necessary to keep it glossy with out any orange peel

ewwwwwwwwww

Here's to destroying the resale value of the your phone I do appreciate the idea though and DIY mentality.

irishrally said:
Here's to destroying the resale value of the your phone I do appreciate the idea though and DIY mentality.
Click to expand...
Click to collapse
lol Same thing was said about my G1.
After I changed it to all white I sold it for 50$ more than I paid.
I was REALLY bored. With Gingerbread not around yet I figured why not.

seeking said:
wet sand, wet sand, wet sand
also make sure to use super high grit paper.
dont be afraid to wet sand the clear coat either...its necessary to keep it glossy with out any orange peel
Click to expand...
Click to collapse
Thanks for tip about the clear coat.
Already ran into some trouble as the paint doesnt seem to adhere as good as I thought. I went at it without adhesion promoter..may have to hit the do over if it doesnt settle well.

xManMythLegend said:
Thanks for tip about the clear coat.
Already ran into some trouble as the paint doesnt seem to adhere as good as I thought. I went at it without adhesion promoter..may have to hit the do over if it doesnt settle well.
Click to expand...
Click to collapse
Did you sand the pieces before painting?
Your paint is going to fall off if you didn't.
It's the entire idea behind teflon coatings.

A little painters trick. Next time don't try to tape off the contacts (or any small area) just get a toothpick and some Vaseline. Put the Vaseline on the contacts then paint. After you are done just wipe clean.
Also watch your flash time between coats. Believe it to not wet paint doesn't bond to dry paint that well. You first coat should still be a little tacky when applying your second coat.

JCopernicus said:
Did you sand the pieces before painting?
Your paint is going to fall off if you didn't.
It's the entire idea behind teflon coatings.
Click to expand...
Click to collapse
Only a light sanding. I did the same with the G1 and had zero issues (I did use adhesion promoter with that one though). Nexus one must have super super teflon.
[IO]ERROR said:
A little painters trick. Next time don't try to tape off the contacts (or any small area) just get a toothpick and some Vaseline. Put the Vaseline on the contacts then paint. After you are done just wipe clean.
Also watch your flash time between coats. Believe it to not wet paint doesn't bond to dry paint that well. You first coat should still be a little tacky when applying your second coat.
Click to expand...
Click to collapse
Great tip.
I actually tried that with Elmers but vaseline would be MUCH easier for the tiny spots.
I may have let it dry too long. I normally have only painted in warm weather months so I can let it sit longer. With the cold weather it seems I have to reduce time between coats.

BTW
How many coats of clear coat is recommended ?
I only had my G1 a few months after painting when I sold it. If I plan to keep the N1 for longer ((no trackball or leds on Nexus S *sigh* Im looking for more durability.))
I recall reading on another forum where someone skipped clear coat altogether and put a zagg/BSE ever on top and it looked great after over a year of usage.

I would prefer spending $15 on full back black available on ebay rather than painting, it doesnt look smooth and highly finished.

charnsingh_online said:
I would prefer spending $15 on full back black available on ebay rather than painting, it doesnt look smooth and highly finished.
Click to expand...
Click to collapse
You mean a case ?
Cant stand the extra bulk.
Anyways..
Had to go back and sand everything off to get all the teflon removed.
What a pain.
I did the bottom piece over much improved. Battery cover will have to wait till after turkey day.

xManMythLegend said:
You mean a case ?
Cant stand the extra bulk.
Anyways..
Had to go back and sand everything off to get all the teflon removed.
What a pain.
I did the bottom piece over much improved. Battery cover will have to wait till after turkey day.
Click to expand...
Click to collapse
There's a couple of people selling black battery covers/antenna bottoms on ebay. With htc/google logo and all.

heres some pics of my painted nexus.. decided to paint it while waiting for replacement digitizer and lcd came in.. one coat primer -> lite sanding -> 2 coats rustoleum flat white -> lite wet sand (just to knock off some of the orange peel) -> 2 coat clear matte rustoleum (not a fan of glossy finishes) -> wet sand.. was going to do the battery/bottom, but am not sold on paint holding up well to that rubber.. will probably end up buying the black ones of ebay later on..

famandeggs, your Nexus looks amazing. Excellent job.
Expecting more pictures once you collected the black Nexus covers and complete your project.

Kelvino9 said:
famandeggs, your Nexus looks amazing. Excellent job.
Expecting more pictures once you collected the black Nexus covers and complete your project.
Click to expand...
Click to collapse
thanks man, will do.. it was a frustrating process lol.. i first tried a gloss enamel gloss paint, but the cure times where a pain (48 hours), and im all thumbs (dropped it a couple times while it was still drying, or wet sanded it to far down exposing the aluminum, forcing me to start over).. eventually just went w/a normal paint, im hoping w/the clear it'll hold up

famandeggs said:
thanks man, will do.. it was a frustrating process lol.. i first tried a gloss enamel gloss paint, but the cure times where a pain (48 hours), and im all thumbs (dropped it a couple times while it was still drying, or wet sanded it to far down exposing the aluminum, forcing me to start over).. eventually just went w/a normal paint, im hoping w/the clear it'll hold up
Click to expand...
Click to collapse
I can only imagine all your efforts you put in. Judging the pictures the paint job looks amazingly smooth.

Kelvino9 said:
I can only imagine all your efforts you put in. Judging the pictures the paint job looks amazingly smooth.
Click to expand...
Click to collapse
looks very nice indeed. but you got dust on your camera lens

The Proper Care & Feeding of your Infinity Tablet

So the infinity, like it's predecessor the Prime is one sharp looking, quality feeling tablet (Build QA issues aside, though Asus could really use a lesson in build consistency)
Ahh but I digress... So as beautiful as the materieals are, most of us discover early on that the beautiful "Spun Metal" aluminum collects fingerprints, smudges and (arrrggghh!) scratches MUCH easier than the glass does. What is one to do? Well there are covers, but there goes your super slim tablet, and if you have a dock, the thickness of a full cover for both components ends up being comically thick by the time all those layers are added.
Another route is the use of "Body armor" kits and such, but they are NOT easy to apply, and personally I don't care for them. Anyway, being fairly high up the OCD scale, and owning an Infinity (as well as having had the Prime, and the TF101 - THERE was a low maintenance finish.
Ahh but I digress... The main point of my post -yes there IS a point, wise guy, and I WILL get to it... EVENTUALLY!
Want to help keep that spun metal finish looking top dollar, like Doc Browns Delorean Time Machine? Granted that was stainless steel, not aluminum, but having a similar brushed surfacing, the secret ingredient for shining and protecting these types of finishes is... Pledge.
Yes: Good Old Lemon Pledge. Get the regual one, no "Extra Moisturizing" No "Orange Clean Formula" or No Wax. The Bikers have known the advantages of Pledge for a quick detailing/ wax before going out for the night, and if you check the can, it is actually good to use in Brushed Stainless (as I mentioned very similar) and other surfaces you may not have realized like leather. Granted I wouldn't use it on fine leather, but on everyday cowhide or cheap PU leather that cases are made of it's great.
Note: I read in multiple reviews that the Prime had an Oleophobic Screen Coating, like the iPad, and that it extended onto the metallic surfaces. This was one assurance that made me want the prime more. However it did not ever seem to have ANY type of coating nor does the Infinity for tha matter.
Application Tips
1. I usually separate the Tablet from the dock first.
2. Then lay a towel down on the counter in my kitchen. Placing the Infinity face down on the towel, use a soft cloth or paper towel dampened with a tiny bit of water, or if it is really printed up, a tiny spray of Windex will help, just do not over wet it, don't let it stay wet (wipe it dry immediately) -be very cautious never to spray or wipe liquid into the speaker grill.
3. Now that the tablet is relatively clean, take your pledge and either spray a small amount around the Asus Logo in the center (a small ring of polish) Again, use extra caution not to spray or wipe any into the speaker grill.
4. Taking first a paper towel, and then a soft cloth, wipe in a circular motion, mimicking the "grain" of the brushed pattern, I usually use the paper towel to spread the polish, making sure I get a thin coat across the entire surface. Then a micro fiber cloth that I wipe with a circular motion and a slight fingertip pressure into the grooves.
Don't expect the tablet to shine any more than it is designed to. It will just look new again, and will be resistant to new fingerprints. Not a lot, but a big improvement from the way it is without this "treatment" For anyone concerned about the long term effects of this, I cannot vouch for periods longer than 8-9 months, but at that point my Prime still looked like new (I also tend to treat my stuff really well. No screen protectors, no body armor, occasionally I put it in the case (when traveling) but the Pledge treatment is the best way I have found to keep it looking sharp. Doc Brown would even be envious - his Flux Capacitor is only single core after all.

Fantastic! Thank you.
OCD'ers unite!

Replacement solution for screen protector

I found mine but I guess I can leave this up since some people replied, thanks guys

The liquid solution is just some very mild soapy water. Something like a single drop to a cup of water. Don't use dish washing detergent to mix it if you can help it, use something mild such as a soap bar or hand-wash. For a hand bar, just run some water over it and catch the water, or just dip it in a cup of water for a second or two. Also avoid stuff that contains moisturisers such as Dove.
The soap in the water is so there is some lubrication so you can move the skin around while wet. If you put too much soap in the water, when it dries it might leave a residue under the skin, giving it a rainbow effect which you don't want.

I used a water and dish soap solution when I put on my XtremeGuard on my Nexus 4. Worked perfectly.
Sent from my Rooted Nexus 4 using XDA Premium

This.
Best Skins Ever also recommends a mild soapy water solution to apply their skins. I forget the exact ratio, but they do give you one in their instructions video @ www.bestskinsever.com/instructions

Soda (coke) burn on Galaxy Edge +

So today I was eating dinner and watching YouTube on my phone. I had a freshly opened Coke 20 oz. (might be important because of Carbonation level) . In my clumsiness, I knocked the coke over but caught it before it made to much of a mess. Some coke droplets flung onto my phones screen, 7 or 8 tiny droplets. Well I didn't clean it off right away because I was cleaning up coke from everything else.
We'll wen I go to clean the coke off the screen to my surprise there is like a footprint of each of the droplets etched into my glass. Not sure if it's a chemical reaction but NOTHING IS GETTING THEM OFF. I have tried scratching with my finger nail, vinegar, goo gone and industrial glass cleaner. Not even a tiny bit of difference.
I've called Samsung but those people are something special. Went to t mobile and various phone places in the mall but they think I'm lying about the coke, didn't have any solutions regardless. I can't even remotely find anything online. If anyone has any insight to this that would be fantastic.
Phone is a S6 Edge +

Phones (and tablets and such) have an oleophobic coating on the surface of the outer glass layer. This both allows your fingers to slide across it easily with minimal friction (rub your thumb on a window or bottle and you'll feel the difference), and for fingerprints and other crud to be easily wiped away.
Colas contain phosphoric acid to give it that "bite" in the taste. Surely you've also seen or heard about cola being used to clean oil spills on pavement, removing rust, cleaning car battery terminals, and dissolving teeth in school experiments.
I'm sure you can guess what's happened to the oleophobic coating on your poor phone. That's why they invented screen protectors.

Planterz said:
Phones (and tablets and such) have an oleophobic coating on the surface of the outer glass layer. This both allows your fingers to slide across it easily with minimal friction (rub your thumb on a window or bottle and you'll feel the difference), and for fingerprints and other crud to be easily wiped away.
Colas contain phosphoric acid to give it that "bite" in the taste. Surely you've also seen or heard about cola being used to clean oil spills on pavement, removing rust, cleaning car battery terminals, and dissolving teeth in school experiments.
I'm sure you can guess what's happened to the oleophobic coating on your poor phone. That's why they invented screen protectors.
Click to expand...
Click to collapse
i figured it had something to do with the acidic nature of the soda, but i didnt know the details. nice!

Clean with coke again !
It will clean other coating too !
.
.
.
.
.
.
.
.
Sorry !
Do at your own risk !
Sent from my Micromax A77 using Tapatalk