Related
do i need to return to stock unrooted to try update via kies or the update via kies if the tablet is rooted and in 4.0.3 happen and only i will lose root ? and will the update via kies if found will appear in it or i will have to return to stock unrooted for it to appear ? in other words do rooting affect update via kies to 4.0.4 in any way or i can update via kies safely and all that happens to me is to lose root ? i do not need ota update i only need kies update
I too am trying to upgrade my Tab 2 7" and my Tab 10.1 to ICS 4.0.4. Both tablets are rooted so I need to either un-root back to stock recovery or flash the new upgrade OS directly. Anyone able to help?
Unable to update with Recovery installed
I have CWM 5.5.0.4 recovery installed and I can't install updates.
Any solutions?
You can grab the new update in the respective tablet development forum and flash it through Odin. The Tab 2 7 has one I just saw that's stock/rooted, most likely the 10.1 has one, too. I had to go back to stock recovery to update. through Kies.
brandontowey said:
You can grab the new update in the respective tablet development forum and flash it through Odin. The Tab 2 7 has one I just saw that's stock/rooted, most likely the 10.1 has one, too. I had to go back to stock recovery to update. through Kies.
Click to expand...
Click to collapse
The only Tab2 7 and Tab 10.1 ROMs I can find are those by ROMWELL which are not truly stock and don't use stock recovery. If you have found something else I have not been able to find in my searching I would appreciate a link. Thanks.
cataloochee said:
The only Tab2 7 and Tab 10.1 ROMs I can find are those by ROMWELL which are not truly stock and don't use stock recovery. If you have found something else I have not been able to find in my searching I would appreciate a link. Thanks.
Click to expand...
Click to collapse
....Which STOCK version would you like!?
Gizmo said:
....Which STOCK version would you like!?
Click to expand...
Click to collapse
For the Tab2 - 7 I am looking for IMM76D.P3113UEBLG5
and for the Tab 10.1 -- IMM76D.UELPL
Thank you.
would love a 4.0.4 clean stock
cataloochee said:
For the Tab2 - 7 I am looking for IMM76D.P3113UEBLG5
and for the Tab 10.1 -- IMM76D.UELPL
Thank you.
Click to expand...
Click to collapse
Agreed, I would love a truly stock version of the LG5 or the new one that just came out.
This way when JB does come, I can simply flash this bad boy with Odin to stock and upgrade it to JB
FlynnErik said:
Agreed, I would love a truly stock version of the LG5 or the new one that just came out.
This way when JB does come, I can simply flash this bad boy with Odin to stock and upgrade it to JB
Click to expand...
Click to collapse
Will be uploading ALL STOCK firmwares/kernels for the P3113 7" Uploading P3113UEBLG5 right now!
Just posted the NEW firmware here!: P3113UEBLH1
How do I use these?
Gizmo said:
Will be uploading ALL STOCK firmwares/kernels for the P3113 7" Uploading P3113UEBLG5 right now!
Just posted the NEW firmware here!: P3113UEBLH1
Click to expand...
Click to collapse
I mean I figure I download all the parts, extract it, and flash the firmware part with Odin (correct? I am still getting used to all the software I use and how to use it, so excuse the stupidity )
What do I do with the kernel? Do I need the kernel file? If I am currently stock rooted on LG5, did the kernel change? For that matter when we get JB, if the kernel changes, what do I do?
Isn't the kernel the core to the device, if that is the wrong one, doesn't it brick in some way? Or am I over simplifying things? Or 100% wrong all together (sorry again for being a moron still learning all this stuff).
FlynnErik said:
I mean I figure I download all the parts, extract it, and flash the firmware part with Odin (correct? I am still getting used to all the software I use and how to use it, so excuse the stupidity )
What do I do with the kernel? Do I need the kernel file? If I am currently stock rooted on LG5, did the kernel change? For that matter when we get JB, if the kernel changes, what do I do?
Isn't the kernel the core to the device, if that is the wrong one, doesn't it brick in some way? Or am I over simplifying things? Or 100% wrong all together (sorry again for being a moron still learning all this stuff).
Click to expand...
Click to collapse
Yes, You could extract the archive and flash the (.md5) File via ODIN or Mobile ODIN Pro! (Which i prefer)
The STOCK kernel is included just in case you have a modded kernel, And want the STOCK kernel back!
Not sure about one, But i imagine if you where to flash the wrong file or even the wrong way you would get unwanted error's and possibly SOFT brick it or HARD brick it....
Ok good so I am learning something by being here!
Gizmo said:
Yes, You could extract the archive and flash the (.md5) File via ODIN or Mobile ODIN Pro! (Which i prefer)
The STOCK kernel is included just in case you have a modded kernel, And want the STOCK kernel back!
Not sure about one, But i imagine if you where to flash the wrong file or even the wrong way you would get unwanted error's and possibly SOFT brick it or HARD brick it....
Click to expand...
Click to collapse
Good to know I am well on my way to being smarter than the avg noob! Now that brings me to my next question, you mentioned Mobile Odin, I thought I read somewhere that if you use it, it doesn't increase the flash counter, first off, how the hell does it work? How do you make a device rewrite itself? How does it not trip the counter for that matter?
Good to know I don't need the kernel, since I was sitting here really confused on why you had included that. I haven't changed my kernel, and I never will touch that (unless a ROM like CM does that since I am thinking about flashing that if JB doesn't get here soon lol). So I just need the firmware part, and all will be good with Odin.
Since I backed up my device after rooting it, I have a rooted stock back up so thank you for giving us a clean stock as back up Do firmware upgrades ever leak from Sammy like on some of the others? Like Moto for example, they had ICS leaking left and right (thats what happens when you dont freeze them! ). Just curious what the odds were of that happening.
PS sorry to the OP for kind of hijacking this, I hope I am helping you at least with my question asking!
cataloochee said:
For the Tab2 - 7 I am looking for IMM76D.P3113UEBLG5
and for the Tab 10.1 -- IMM76D.UELPL
Thank you.
Click to expand...
Click to collapse
I don't have a 10.1"....But i will see what i can "Dig up!"
Here's the one for your 7"....STOCK kernel included in archive!
Firmware Version: P3113UEBLG5
OS: Ice Cream Sandwich
OS Version: v4.0.4
Release Date: 07-19-2012
Build Date: 07-17-2012
Changelist: 911625
Firmware:
http://www.mediafire.com/?mkklk88j45ef7lb
http://www.mediafire.com/?45el4vnir3hzaj6
http://www.mediafire.com/?234tv3gbobgiueg
http://www.mediafire.com/?y1q9q8q79963dtp
http://www.mediafire.com/?nnn1b7p6dype1fa
---------- Post added at 08:28 PM ---------- Previous post was at 08:13 PM ----------
FlynnErik said:
Good to know I am well on my way to being smarter than the avg noob! Now that brings me to my next question, you mentioned Mobile Odin, I thought I read somewhere that if you use it, it doesn't increase the flash counter, first off, how the hell does it work? How do you make a device rewrite itself? How does it not trip the counter for that matter?
Good to know I don't need the kernel, since I was sitting here really confused on why you had included that. I haven't changed my kernel, and I never will touch that (unless a ROM like CM does that since I am thinking about flashing that if JB doesn't get here soon lol). So I just need the firmware part, and all will be good with Odin.
Since I backed up my device after rooting it, I have a rooted stock back up so thank you for giving us a clean stock as back up Do firmware upgrades ever leak from Sammy like on some of the others? Like Moto for example, they had ICS leaking left and right (thats what happens when you dont freeze them! ). Just curious what the odds were of that happening.
PS sorry to the OP for kind of hijacking this, I hope I am helping you at least with my question asking!
Click to expand...
Click to collapse
LOL! :laugh: I don't know how EXACTLY it works (Since i don't have the source code) But REALLY simple to install/use!, Yup! Just download firmware and ODIN or Mobile ODIN and off you go! Your welcome!....Eventually i will have them ALL uploaded and posted! Stuff gets "Leaked" ALL the time!
---------- Post added at 08:38 PM ---------- Previous post was at 08:28 PM ----------
cataloochee said:
For the Tab2 - 7 I am looking for IMM76D.P3113UEBLG5
and for the Tab 10.1 -- IMM76D.UELPL
Thank you.
Click to expand...
Click to collapse
What model is the 10.1" Tab?....GT-P7510?
Thanks!
LOL! :laugh: I don't know how EXACTLY it works (Since i don't have the source code) But REALLY simple to install/use!, Yup! Just download firmware and ODIN or Mobile ODIN and off you go! Your welcome!....Eventually i will have them ALL uploaded and posted! Stuff gets "Leaked" ALL the time!
I didn't need the details of it lol I don't expect everyone here to know everything about everything, just an overview, since to me it doesn't make sense. I am curious if I should be using that instead of PC odin as well, which is why I was hoping to get more information about how the 2 differ since from the description in the store, there is no difference lol and thats just not possible.
So things do leak? Since Moto had build leaks weeks in advance of the ICS release for the Razr for example (I have a Razr, hate the battery life as a side though, get a Maxx if anything). So I was wondering do they do Soak Tests on tablets with Sammy? How do you apply for one? How often is there a leak of a new build? Since if JB is coming soon, there should be leaks coming out for it shouldn't there?
FlynnErik said:
I didn't need the details of it lol I don't expect everyone here to know everything about everything, just an overview, since to me it doesn't make sense. I am curious if I should be using that instead of PC odin as well, which is why I was hoping to get more information about how the 2 differ since from the description in the store, there is no difference lol and thats just not possible.
So things do leak? Since Moto had build leaks weeks in advance of the ICS release for the Razr for example (I have a Razr, hate the battery life as a side though, get a Maxx if anything). So I was wondering do they do Soak Tests on tablets with Sammy? How do you apply for one? How often is there a leak of a new build? Since if JB is coming soon, there should be leaks coming out for it shouldn't there?
Click to expand...
Click to collapse
Their is difference!, ODIN (PC Version) Requires you to install it (And some drives....I think) On your PC and run it and connect your device via USB to your PC and flash it....Mobile ODIN is an app (.apk) You install on your device and flash it directly from the app! LEAKS just come when the come!
I knew that much!
Gizmo said:
Their is difference!, ODIN (PC Version) Requires you to install it (And some drives....I think) On your PC and run it and connect your device via USB to your PC and flash it....Mobile ODIN is an app (.apk) You install on your device and flash it directly from the app! LEAKS just come when the come!
Click to expand...
Click to collapse
I may be a n00b to a lot of this stuff, but I knew that much of a difference lol I was kinda figuring there was more of a difference that I wasn't aware of to it. Like what the benefits were of using mobile over PC or etc lol.
I do thank you for explaining that much though
FlynnErik said:
I may be a n00b to a lot of this stuff, but I knew that much of a difference lol I was kinda figuring there was more of a difference that I wasn't aware of to it. Like what the benefits were of using mobile over PC or etc lol.
I do thank you for explaining that much though
Click to expand...
Click to collapse
For starters, Mobile ODIN is easier to use (A simple app) and doesn't "Trip" The flash counter! The PC version does, And is not as easy as the mobile version for some users
cataloochee said:
For the Tab2 - 7 I am looking for IMM76D.P3113UEBLG5
and for the Tab 10.1 -- IMM76D.UELPL
Thank you.
Click to expand...
Click to collapse
Here's the STOCK firmware for your 10.1" Tab!
Firmware Version: P7510UELPL
OS: Ice Cream Sandwich
OS Version: v4.0.4
Release Date: 08-08-2012
Build Date: 08-08-2012
Changelist: ?
Firmware:
http://www.mediafire.com/?bxip6zdcy6dv9cl
http://www.mediafire.com/?dtjhbxeh7yu2kst
http://www.mediafire.com/?41o0zc311ivrcft
I wish I could have used Modin then lol
Gizmo said:
For starters, Mobile ODIN is easier to use (A simple app) and doesn't "Trip" The flash counter! The PC version does, And is not as easy as the mobile version for some users
Click to expand...
Click to collapse
Since I had read that about the flash counter, Modin is easier than the PC wersion? Hmmmm.... but you can't use it unless your rooted, so how would that work? Don't you have to trip the counter to be able to use it? Or did I trip it because I didn't know any better?
BTW we are horribly off topic on the thread, if you want to msg me, please do, I don't wanna turn this into a different thread than what it was. Even though I have already lol
FlynnErik said:
Since I had read that about the flash counter, Modin is easier than the PC wersion? Hmmmm.... but you can't use it unless your rooted, so how would that work? Don't you have to trip the counter to be able to use it? Or did I trip it because I didn't know any better?
BTW we are horribly off topic on the thread, if you want to msg me, please do, I don't wanna turn this into a different thread than what it was. Even though I have already lol
Click to expand...
Click to collapse
....Check your Inbox!
Hi,
I have verizon s3 with 4.1.2. I would like to know which guide are correct for me to use guide for me to root. I have noticed most of guides are from last year. Not too sure which link is correct for me. I spend hours and hours reading how to root. My s3 is currently non root phone for now. Hopefully someone will help me.
Many thanks!
http://forum.xda-developers.com/showthread.php?t=2046439&page=46
Sent from a Shaftamle Galaxy S3
There is a guide on the android dev section called "Root for Jelly Bean 4.1.1 and 4.1.2 OTA".
Shaftamle said:
http://forum.xda-developers.com/showthread.php?t=2046439&page=46
Sent from a Shaftamle Galaxy S3
Click to expand...
Click to collapse
Thank you so much! That linked worked! I rooted the phone and went ahead to do nandroid back up that what everyone says on the forums. I have to do is imei back up and then find right roms for me!
Thanks a lot!:good::good::good:
No problem, glad I could help. Check this link out for an All in One ROM page. There are some that are listed in Android development and original Android development that aren't on this post but it's a good starting point.
http://forum.xda-developers.com/showthread.php?t=1850506&page=20
Sent from a Shaftamle Galaxy S3
Shaftamle said:
No problem, glad I could help. Check this link out for an All in One ROM page. There are some that are listed in Android development and original Android development that aren't on this post but it's a good starting point.
http://forum.xda-developers.com/showthread.php?t=1850506&page=20
Sent from a Shaftamle Galaxy S3
Click to expand...
Click to collapse
I am shorta behind of all roms lol. I had to look for rom comes with 4.1.2 i wouldn't download the 4.2.2. I really wanted liquidsmooth. That looks good on youtube.
Any ROM should work be it 4.1.1, 4.1.2 or 4.2.2. All that is number is the android version. You're baseband stays the same. Clean ROM is great, liquid smooth is also good. Hell, try em all, that's the best part. Of course, this coming from a certified flash-a-holic!
Sent from a Shaftamle Galaxy S3
Shaftamle said:
http://forum.xda-developers.com/showthread.php?t=2046439&page=46
Sent from a Shaftamle Galaxy S3
Click to expand...
Click to collapse
I tried the root method you suggested twice and it rooted fine but the problem was installing a ROM for example i tried installing Liquid Smooth 4.2.2 Stable not sure whether MR1 or whatever but i did it the first time on 4.2.1 stock for vzw s3 and i rooted it then installed the Rom and Yellow Triangle so i had to odin it back i thought it might of been the update (4.2.1) so i then updated up too 4.1.1 then began the same process Rooted Then installed rom same problem Yellow Triangle
thegalacticbear said:
I tried the root method you suggested twice and it rooted fine but the problem was installing a ROM for example i tried installing Liquid Smooth 4.2.2 Stable not sure whether MR1 or whatever but i did it the first time on 4.2.1 stock for vzw s3 and i rooted it then installed the Rom and Yellow Triangle so i had to odin it back i thought it might of been the update (4.2.1) so i then updated up too 4.1.1 then began the same process Rooted Then installed rom same problem Yellow Triangle
Click to expand...
Click to collapse
Do you mean the yellow triangle in the Odin boot screen? If you installed the ROM properly (through recovery like clockworkmod or TWRP) then it shouldn't boot to that screen at all..
Sent from my SCH-I535 using Tapatalk 2
thegalacticbear said:
I tried the root method you suggested twice and it rooted fine but the problem was installing a ROM for example i tried installing Liquid Smooth 4.2.2 Stable not sure whether MR1 or whatever but i did it the first time on 4.2.1 stock for vzw s3 and i rooted it then installed the Rom and Yellow Triangle so i had to odin it back i thought it might of been the update (4.2.1) so i then updated up too 4.1.1 then began the same process Rooted Then installed rom same problem Yellow Triangle
Click to expand...
Click to collapse
Your bootloader is still locked. Odin back to stock, re-root, and unlock with version 1.2. The version in the Play Store will not work. If you search for that version, there are links everywhere. After you complete this, back up everything including IMEI and flash whatever you want.
Thanks I installed liquid smooth ROM with unlocked boot loader. Everything looks great the way I want it! Navbar looks cool! I know what u mean by 4.2.2, I thought these are for 4.2.2. Confused user here.
Thanks again
Sent from my SCH-I535 using xda app-developers app
HHF2 said:
Your bootloader is still locked. Odin back to stock, re-root, and unlock with version 1.2. The version in the Play Store will not work. If you search for that version, there are links everywhere. After you complete this, back up everything including IMEI and flash whatever you want.
Click to expand...
Click to collapse
Thanks but ever since i odin my phone back it doesnt let me update now im stuck in 4.0.4
@galactic bear: What happened when you try to update it past 4.0.4?? Did it try to update through the custom recovery?
As far as the post goes that I gave you the link for, under Section 1 where there's those 3 bullet points and it says download 1 of the following, make sure you do the 1 that says root and unlock bootloader it's the third bullet.
Sent from a Shaftamle Galaxy S3
---------- Post added at 03:40 PM ---------- Previous post was at 03:25 PM ----------
LeonKnight12 said:
Thanks I installed liquid smooth ROM with unlocked boot loader. Everything looks great the way I want it! Navbar looks cool! I know what u mean by 4.2.2, I thought these are for 4.2.2. Confused user here.
Thanks again
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Think of it being similar to Windows. You have 95, 2000, xp, win7 and win8. All of them are windows just different releases. So if you take your computer with xp and install 7 on it it should be fine. Just like if you install liq. Smooth 4.2.2 on a device running 4.1.1 your essentially upgradeing the Operating system.So now the 4.1.1 phone becomes 4.2.2. That's it in a nutshell.
Sent from a Shaftamle Galaxy S3
need help on rooting
I accidentally root the phone with Stock ROM VRBLK3 (4.1.1), my original stock room is 4.1.2 (VRBMB1). Now my phone has been acting incorrectly. Can you guys guild me how to get fix it or show me the link to the site. Thanks
takeu2 said:
I accidentally root the phone with Stock ROM VRBLK3 (4.1.1), my original stock room is 4.1.2 (VRBMB1). Now my phone has been acting incorrectly. Can you guys guild me how to get fix it or show me the link to the site. Thanks
Click to expand...
Click to collapse
Assuming you're rooted, either flash the stock root mb1 or restore you're nandroid backup. You did make a back up, RIGHT? THIS is why we back stuff up.
http://forum.xda-developers.com/showthread.php?t=2178482&page=16
Sent from a Shaftamle Galaxy S3
Thanks Shaftamle
Hi Shaftamle,
I just got my Samsung Galaxy S3 (bought a used one off e-bay so that I don't lose my unlimited data plan).
I plan to root my phone and was doing some preliminary homework. It looks like you have answered most of other people's questions, so thank you for helping out so much. I think I can root by myself with the information on this thread.
Thank you, I will do as suggested.
I am running into problems in Step 3. I used Clockwork (non-touch) and it says "success (0) / fail (0)". I do have "auto-reboot" unchecked.
Not sure what I am doing wrong. Step 2 went well.
Shaftamle said:
Assuming you're rooted, either flash the stock root mb1 or restore you're nandroid backup. You did make a back up, RIGHT? THIS is why we back stuff up.
http://forum.xda-developers.com/showthread.php?t=2178482&page=16
Sent from a Shaftamle Galaxy S3
Click to expand...
Click to collapse
Geez you must be a very patient person. Trying to help 3 people in one thread. These QA threads seem to be getting slammed with more and more people screwing up Odin during a flash.
Sent from my SCH-I535 using xda premium
Seriously, how hard is it to follow directions?
All you need is ODIN and a stock rooted Touchwiz.tar. Once you have that you're golden. Install v1.2 to your phone from here to unlock your bootloader and then install this to flash your recovery. This whole process can be completed in about 10-15 minutes tops.
rooting verizon sgs3 after latest update
Shaftamle said:
No problem, glad I could help. Check this link out for an All in One ROM page. There are some that are listed in Android development and original Android development that aren't on this post but it's a good starting point.
http://forum.xda-developers.com/showthread.php?t=1850506&page=20
Sent from a Shaftamle Galaxy S3
Click to expand...
Click to collapse
excuse me i really could use sum help i been doing some reading on rooting my s3 but my girlfriend updated my phone to the new update vrbmf1 i was wondering if there was a way to still root my s3... i have found nothing on this please help
Recently bought a S3 its a SCH-I535 with 4.3 on it. What id really like is to just have the phone run more efficient and get rid of bloatware. i looked at the cyanogenmod installer.. does that work? also is there anyway to get 4.4 on it ? I dont know much about any of this stuff since my last phone was worked on by a friend after he went through it my galaxy nexus worked 100 times better than it before... Thanks !
bullneigh said:
Recently bought a S3 its a SCH-I535 with 4.3 on it. What id really like is to just have the phone run more efficient and get rid of bloatware. i looked at the cyanogenmod installer.. does that work? also is there anyway to get 4.4 on it ? I dont know much about any of this stuff since my last phone was worked on by a friend after he went through it my galaxy nexus worked 100 times better than it before... Thanks !
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2575661
This will help and answers lots of questions.
U have a lock bootloader. CANNOT be unlock..
CANT flash custom recovery
CANT flash CM Or AOSP roms
But theres still hope.
Saferoot
Safetrap
And TW 4.3 with no bloatware
Sent from my SCH-I535 using Tapatalk
there will be stock rooted odin for sprint galaxy s5 ?
Correct me if I'm wrong, but isn't your phone considered stock rooted when using chainfire's root?
slickdealers said:
Correct me if I'm wrong, but isn't your phone considered stock rooted when using chainfire's root?
Click to expand...
Click to collapse
you right about that but it just fast way to go back from flash rom and u dont like then u can go back by using rooted odin and it just fast way u kno like galaxy s3. i am fine with using chainfire root method, i just prefer odin cuz it all one click away
DXL024 said:
you right about that but it just fast way to go back from flash rom and u dont like then u can go back by using rooted odin and it just fast way u kno like galaxy s3. i am fine with using chainfire root method, i just prefer odin cuz it all one click away
Click to expand...
Click to collapse
Oh ok I see. That would make things easier between switching roms. You can also do that with a custom recovery though using backups. No computer required. That's what I used to do with the Galaxy S3.
Has anyone got their Tab 3 7.0 rooted on 4.4.2 yet? If so please give links. Haven't been able to find anything regarding an updated method or files for the new firmware.
I have the sprint version, SM-T217S
Munky78 said:
Has anyone got their Tab 3 7.0 rooted on 4.4.2 yet? If so please give links. Haven't been able to find anything regarding an updated method or files for the new firmware.
I have the sprint version, SM-T217S
Click to expand...
Click to collapse
I was able to get rooted w/ TWRP using Odin 3.09.
I followed these instructions, but i did not use the android-armeabi-universal-root-signed.zip, i used a different one I had on my sdcard already. I dont think it matters.
http://forum.xda-developers.com/showthread.php?t=2514821
the first time i attempted it failed and replaced TWRP with the stock recovery because i forgot to un-check the automatic reboot box.
My second attempt i *unchecked automatic reboot,* unplugged the tablet from my computer *before* rebooting it into recovery, worked just fine!
Got TWRP installed just fine, but when I open SuperSU, it says there are no binaries installed.
Munky78 said:
Got TWRP installed just fine, but when I open SuperSU, it says there are no binaries installed.
Click to expand...
Click to collapse
I'm in the same situation....TWRP is up and running SuperSU throws out the same message as above.
Thoughts?
late,
Coz
cozboogie said:
I'm in the same situation....TWRP is up and running SuperSU throws out the same message as above.
Thoughts?
late,
Coz
Click to expand...
Click to collapse
attached is the superSU zip I flashed using TWRP
Thanks! Got it working perfectly! Got it all done while the wife slept....I'm sure she thanks you as well so she doesn't have to hear me ***** about something not working right. lol
Thanks gonzo!!!
late,
Coz
Sent from my SM-T217S using Tapatalk
Thank you. It worked.
Will this work for t217s model? Tia.
Sent from the Galaxy Tab 3.
pmacevad said:
Will this work for t217s model? Tia.
Sent from the Galaxy Tab 3.
Click to expand...
Click to collapse
Thats what I have, worked for me.
gonzoadmin said:
Thats what I have, worked for me.
Click to expand...
Click to collapse
Did it work for kitkat?
Sent from my rooted & s-off'd Sprint HTC One, powered by Android OS ?
are u relly sure that kitkat has release for tab 3 7.0??
bangdes said:
are u relly sure that kitkat has release for tab 3 7.0??
Click to expand...
Click to collapse
Only for the Sprint version.
bangdes said:
are u relly sure that kitkat has release for tab 3 7.0??
Click to expand...
Click to collapse
Yes, I'm sure I'm running kitkat.
Sent from my rooted & s-off'd Sprint HTC One, powered by Android OS ?
pmacevad said:
Did it work for kitkat?
Sent from my rooted & s-off'd Sprint HTC One, powered by Android OS ?
Click to expand...
Click to collapse
the way i rooted KK:
odin3 v3.07
TWRP TAR
supersu v1.93
pmacevad said:
Did it work for kitkat?
Sent from my rooted & s-off'd Sprint HTC One, powered by Android OS ?
Click to expand...
Click to collapse
yes