Related
So I can use Titanium backup to freeze things to make the battery last longer? I am about to go back to a iphone if I can't get this battery life situation resolved.
Go here http://forum.xda-developers.com/showthread.php?t=1340526 you need to use that method to root 2.3.6 instructions and files needed are in that thread. Its very easy
Where else can i dl the super one click the link isn't working
Sent from my SAMSUNG-SGH-I727 using XDA App
The one click root will not work on 2.3.6 u need to use the method above
silver03wrx said:
The one click root will not work on 2.3.6 u need to use the method above
Click to expand...
Click to collapse
Silver03wrx: any idea if we can safely unroot with SuperOneClick 2.2 on 2.3.6 if we rooted with it on 2.3.5?
Sent from my SAMSUNG-SGH-I727 using XDA App
I doubt it works. It wont root 2.3.6 so i dont see why it would unroot. If you want to unroot probobly have to odin the stock 2.3.5 tar and take the ota update to unroot
Noob clarification re "internal sd" from Melvins Root guide
When he says " your internal SD",that means NOT the SD card?.. right? Sorry for the request for clarification!
There is an internal 16gb sd card that is not removeable. There is also and external sd slot that is r emoveable
silver03wrx said:
There is an internal 16gb sd card that is not removeable. There is also and external sd slot that is r emoveable
Click to expand...
Click to collapse
Thanks Silver, perhaps I was not being complete in my question? I know that there are both, but my question was specifically related to rooting. In his post " *Put the Superuser .zip file on your internal SD" from these instructions" http://forum.xda-developers.com/showthread.php?t=1311194".
I think it means that you put the. Zip file on the phones internal memory & NOT the removable SD card?
Yes you are correct sir
Thanks SILVER.... it just seemed a little ambiguous, and for a noob, that could be dangerous. ...you were "thanked" .
Uhm, on Melvin's post of Oct 19th...he says to put the Superuser zip on the INTERNAL SD....BUT on Copperhed's post of Nov 10th....he says to put the Superuser file on the EXTERNAL SD? I would imagine that there is something important about where it is located on the phone?
I was pretty sure that I was not losing my mind, I just had to find where I saw the discrepancy
silver03wrx said:
Go here http://forum.xda-developers.com/showthread.php?t=1340526 you need to use that method to root 2.3.6 instructions and files needed are in that thread. Its very easy
Click to expand...
Click to collapse
I just want to root and leave everything stock. I don't feel like dealing with all that custom stuff. Is there a way to just flash a rooted stock rom with odin and be done with it. I'm on 2.3.6 btw
cbs1507 said:
I just want to root and leave everything stock. I don't feel like dealing with all that custom stuff. Is there a way to just flash a rooted stock rom with odin and be done with it. I'm on 2.3.6 btw
Click to expand...
Click to collapse
The GS2 doesn't support booting recoveries via fastboot, so the only way to root (short of using a rooting tool) is to install a custom recovery like TWRP or CWM via Odin, and then root the system from within the recovery. You can restore the stock recovery if you want, but I don't know of any other clean methods to root.
Also, you are aware that there is an official (Samsung provided) Jelly Bean ROM for the GS2, right? While that doesn't get you "up to date", it at least gets you on a 4.x stream, which will dramatically improve app support on the Play Store.
jshamlet said:
The GS2 doesn't support booting recoveries via fastboot, so the only way to root (short of using a rooting tool) is to install a custom recovery like TWRP or CWM via Odin, and then root the system from within the recovery. You can restore the stock recovery if you want, but I don't know of any other clean methods to root.
Also, you are aware that there is an official (Samsung provided) Jelly Bean ROM for the GS2, right? While that doesn't get you "up to date", it at least gets you on a 4.x stream, which will dramatically improve app support on the Play Store.
Click to expand...
Click to collapse
I can't just flash a rooted stock file with odin? I don't understand all that other stuff you're saying/
cbs1507 said:
I can't just flash a rooted stock file with odin? I don't understand all that other stuff you're saying/
Click to expand...
Click to collapse
There may be a way to install a pre-rooted image from Odin, but most folks do it from a recovery. Fortunately, if you can figure out how to just install the recovery, it will be able to root whatever you have installed, and is a heck of a lot safer than messing with the OS image. Unfortunately, how that happens depends on the recovery, but in most cases it will over you the option to fix the su binary when you reboot.
I won't repeat the steps here, as there are several guides for installing recoveries via ODIN. I will point you to the TWRP repository, however -> https://dl.twrp.me/skyrocket/
So let me get this straight, if I flash a normal stock Rom from a recovery it will automatically root it? What is a recovery? Is that the same thing as download mode? I'll try to find a thread, but of course if u could post a the ad link I would appreciate it.
Hi how to upgrade 2.3.6 to latest version andriod samsung galaxy s2 at&t i727 can u please give me instructions
Naturally, I am rooted on 2.3.5, if I do this update, will I lose root access and/or will I not be able to update do to my skyrocket being rooted?
pillzburydoughboy said:
Naturally, I am rooted on 2.3.5, if I do this update, will I lose root access and/or will I not be able to update do to my skyrocket being rooted?
Click to expand...
Click to collapse
Update will remove root and will fail if you have CWM installed, it requires stock recovery to apply (this is of course if you go the official update route).
Return to stock recovery
So how do I return to stock recovery from cwm? I'm not so concerned about this update, but I'd like to use stock ics when it comes out. ( keeping root, of course)
Jobuca said:
So how do I return to stock recovery from cwm? I'm not so concerned about this update, but I'd like to use stock ics when it comes out. ( keeping root, of course)
Click to expand...
Click to collapse
Flash stock recovery with ODIN, make sure there is not a kernel in the .tar or the flash counter will trip.
Another question and sorry if I sound like a newb! Will I easily be able to reroot my phone?
pillzburydoughboy said:
Another question and sorry if I sound like a newb! Will I easily be able to reroot my phone?
Click to expand...
Click to collapse
1 click unroot, 1 click root
pillzburydoughboy said:
Another question and sorry if I sound like a newb! Will I easily be able to reroot my phone?
Click to expand...
Click to collapse
If you get familiar with ODIN (and heed the same warning I posted above) all you end up having to do is flash CWM recovery and then install superuser via an update zip file. You may have to flash it "2 - 3 times to get it to complete without error" I am not sure why it does that but I followed the instructions around here somewhere.
Many thanks to you guys! I had the same question.
Sent from my SAMSUNG-SGH-I727 using XDA
pls i just go my tf700 2 days ago. with building number IML74K.US_epad-9.4.5.26-20120720,. i want to root and need jelly bean on it, but i dont know how to go about it. also i have no memory card yet, pls someone enlighten me on the steps.:crying:
topdee said:
pls i just go my tf700 2 days ago. with building number IML74K.US_epad-9.4.5.26-20120720,. i want to root and need jelly bean on it, but i dont know how to go about it. also i have no memory card yet, pls someone enlighten me on the steps.:crying:
Click to expand...
Click to collapse
First most important, you need to make a NVflash backup of your bootloader, BEFORE PROCEED to upgrade. This is very important, once you upgrade you will not able to do so.
http://forum.xda-developers.com/showthread.php?t=1901479
buhohitr said:
First most important, you need to make a NVflash backup of your bootloader, BEFORE PROCEED to upgrade. This is very important, once you upgrade you will not able to do so.
http://forum.xda-developers.com/showthread.php?t=1901479
Click to expand...
Click to collapse
but how do i upgrade from .26 after the backup? and do i need memory card for the back?
topdee said:
but how do i upgrade from .26 after the backup? and do i need memory card for the back?
Click to expand...
Click to collapse
So did you make a NVflash backup yet? if not you shouldn't proceed. So your device haven't found any OTA update when you check for update in settings -> about tablet-->check for update?
buhohitr said:
So did you make a NVflash backup yet? if not you shouldn't proceed. So your device haven't found any OTA update when you check for update in settings -> about tablet-->check for update?
Click to expand...
Click to collapse
i haven't done anything yet, but my devices sees no update. so assuming i make a NVflash back up, what's the next thing?
topdee said:
i haven't done anything yet, but my devices sees no update. so assuming i make a NVflash back up, what's the next thing?
Click to expand...
Click to collapse
Let do one step at a time. NVflash is very very critical, once you upgrade you will not able to do this. NVflash backup help you to recover from a soft brick situation. After you done with NVflash, here is how to manual upgrade to JB.
1) Download the .30 verion firmware from Asus site (make sure if you in US, you should download the US version of .30)
http://support.asus.com/Download.aspx?SLanguage=en&m=ASUS+Transformer+Pad+Infinity+TF700T&p=20&s=16
2) Extract the .zip file somehwere on your desktop (the result will be another .zip file,use it for step 3)
3) Rename the extracted file to EP201_768_SDUPDATE.ZIP and copy it to the ROOT of a MicroSD card or INTERNAL SD card.
4) Use this button combination to get to stock recovery mode
Turn off tablet. Pressing Volume Down and POWER button together until you see white text message appeared on the screen, now release both buttons. Now press Volume UP button (before the 5 seconds expire).At this point the device will go in recovery and should start updating your firmware .
Once done, I will go into how to root.
buhohitr said:
Let do one step at a time. NVflash is very very critical, once you upgrade you will not able to do this. NVflash backup help you to recover from a soft brick situation. After you done with NVflash, here is how to manual upgrade to JB.
1) Download the .30 verion firmware from Asus site (make sure if you in US, you should download the US version of .30)
http://support.asus.com/Download.aspx?SLanguage=en&m=ASUS+Transformer+Pad+Infinity+TF700T&p=20&s=16
2) Extract the .zip file somehwere on your desktop (the result will be another .zip file,use it for step 3)
3) Rename the extracted file to EP201_768_SDUPDATE.ZIP and copy it to the ROOT of a MicroSD card or INTERNAL SD card.
4) Use this button combination to get to stock recovery mode
Turn off tablet. Pressing Volume Down and POWER button together until you see white text message appeared on the screen, now release both buttons. Now press Volume UP button (before the 5 seconds expire).At this point the device will go in recovery and should start updating your firmware .
Once done, I will go into how to root.
Click to expand...
Click to collapse
ok, thanx, am downloading the file now. what you are trying to say is that i need to be on .30 before getting to jb?
topdee said:
ok, thanx, am downloading the file now. what you are trying to say is that i need to be on .30 before getting to jb?
Click to expand...
Click to collapse
1. Yes, if you DON'T want to UNLOCK to root your device. Once you're on .30, you root then use OTA root keeper to save root then upgrade to JB.
2. If you went straight to JB, then you need to unlock in order to root. This will be more complicate, since you need to install custom recovery, fastboot and SDK.
buhohitr said:
1. Yes, if you DON'T want to UNLOCK to root your device. Once you're on .30, you root then use OTA root keeper to save root then upgrade to JB.
2. If you went straight to JB, then you need to unlock in order to root. This will be more complicate, since you need to install custom recovery, fastboot and SDK.
Click to expand...
Click to collapse
ok. but is there any benefit or essence UNLOCKING?
topdee said:
ok. but is there any benefit or essence UNLOCKING?
Click to expand...
Click to collapse
Unlocking allows you to run custom rom and making nanodroid backup using custom recovery (2 main reasons for unlocking)
buhohitr said:
Unlocking allows you to run custom rom and making nanodroid backup using custom recovery (2 main reasons for unlocking)
Click to expand...
Click to collapse
I'd love to run custom rom, just that am afraid of bricking my device.
topdee said:
I'd love to run custom rom, just that am afraid of bricking my device.
Click to expand...
Click to collapse
Most of bricking caused by operators' errors, like using the wrong recovery, wrong bootloader/wrong version for the rom etc.., but if you careful, by doing search and ask first then it's pretty safe to flash custom rom.
buhohitr said:
Most of bricking caused by operators' errors, like using the wrong recovery, wrong bootloader/wrong version for the rom etc.., but if you careful, by doing search and ask first then it's pretty safe to flash custom rom.
Click to expand...
Click to collapse
i hope i am not disturbing you. but assuming based on from .26 i want to root, upgrade to jb and also custom ROM, whats the process? is it the same process?
topdee said:
i hope i am not disturbing you. but assuming based on from .26 i want to root, upgrade to jb and also custom ROM, whats the process? is it the same process?
Click to expand...
Click to collapse
None at all. Let assumed you did the nvflash (backup your .26 bootloader). The simple process would be, download full .30 rom from Asus site, place on root of your external micro SD card or internal SDcard, boot into stock recovery and flash it. Next root your device, then download OTA root keeper to save your root. Let OTA upgrade your device, if OTA is not working, then manually upgrade to JB. Once on JB, use OTA root keeper to restore root. That's it.
buhohitr said:
None at all. Let assumed you did the nvflash (backup your .26 bootloader). The simple process would be, download full .30 rom from Asus site, place on root of your external micro SD card or internal SDcard, boot into stock recovery and flash it. Next root your device, then download OTA root keeper to save your root. Let OTA upgrade your device, if OTA is not working, then manually upgrade to JB. Once on JB, use OTA root keeper to restore root. That's it.
Click to expand...
Click to collapse
thanx bro, after upgrade with the above process wih root intact i can run custom ROM write?
topdee said:
thanx bro, after upgrade with the above process wih root intact i can run custom ROM write?
Click to expand...
Click to collapse
Well, if you plan to run custom rom, you need to unlock and custom roms come pre-rooted, so you don't have to worry about losing root.
buhohitr said:
Well, if you plan to run custom rom, you need to unlock and custom roms come pre-rooted, so you don't have to worry about losing root.
Click to expand...
Click to collapse
based on what i read from the link of nvflash, i need to unlock my device before using nvflash
topdee said:
based on what i read from the link of nvflash, i need to unlock my device before using nvflash
Click to expand...
Click to collapse
Correct bro!
buhohitr said:
Correct bro!
Click to expand...
Click to collapse
ok, assuming i have unlock, backup using nvflash, and eventuall follow all process and reached jb with root intact, how do i introduce custom rom?
topdee said:
ok, assuming i have unlock, backup using nvflash, and eventuall follow all process and reached jb with root intact, how do i introduce custom rom?
Click to expand...
Click to collapse
On your PC you need the following:
1. Android SDK (should comes with ADB and fastboot commands).
2. USB driver for your device.
You are going to use fastboot command to install custom recovery, or you could download Goomanager from Googleplay and install TWRP this way. Once you have TWRP/CWR, you boot into custom recovery mode (hold down volume down and power button), then find the custom rom then flash it, pretty straight forward.
So I saw here that the NE5 update was out, and I want to install it. However, obviously I can't do an OTA update due to it being a "modified device." I am running Philz Recovery and root from flashing SuperSU.zip.
Is there any way to update manually, without losing root (permanently), recovery, or wiping all my data? I know that I could always restore the stock recovery and firmware via ODIN, but that would get rid of everything, including my data.
(Side question: What exactly does the NE5 update add? I know it's another build of 4.4.2 but what features?)
Thanks.
SOLVED: Just went the long route with wiping and installing the updated NE5 firmware via ODIN. Flashed Philz recovery and SuperSU.
Admins/Mods feel free to delete.
triplepwnu said:
So I saw here that the NE5 update was out, and I want to install it. However, obviously I can't do an OTA update due to it being a "modified device." I am running Philz Recovery and root from flashing SuperSU.zip.
Is there any way to update manually, without losing root (permanently), recovery, or wiping all my data? I know that I could always restore the stock recovery and firmware via ODIN, but that would get rid of everything, including my data.
(Side question: What exactly does the NE5 update add? I know it's another build of 4.4.2 but what features?)
Thanks.
Click to expand...
Click to collapse
The NE5 file is already deodexed and rooted. Therefore, you don't lose root. You get Wi-Fi calling feature with this updated. And, I believe it's an update to the modem.
Robbie Doo said:
The NE5 file is already deodexed and rooted. Therefore, you don't lose root. You get Wi-Fi calling feature with this updated. And, I believe it's an update to the modem.
Click to expand...
Click to collapse
Wow that was a fast fix. How can I go about installing this? (File download and method of installation)
triplepwnu said:
Wow that was a fast fix. How can I go about installing this? (File download and method of installation)
Click to expand...
Click to collapse
Just download the file and follow the instructions here:
http://forum.xda-developers.com/showthread.php?t=2787760&page=2
Remember: You will lose all data. So it's better if you do a backup of your data using Titanium or alike to get the data back.
Robbie Doo said:
Just download the file and follow the instructions here:
http://forum.xda-developers.com/showthread.php?t=2787760&page=2
Remember: You will lose all data. So it's better if you do a backup of your data using Titanium or alike to get the data back.
Click to expand...
Click to collapse
Will do. So this keeps PhilZ? And this is the update after ND2, making it the most recent? Sorry for all the noob questions, I've never had this problem with my Galaxy Nexus, Droid, or Motorola Xoom.
triplepwnu said:
Will do. So this keeps PhilZ? And this is the update after ND2, making it the most recent? Sorry for all the noob questions, I've never had this problem with my Galaxy Nexus, Droid, or Motorola Xoom.
Click to expand...
Click to collapse
If it takes you back to full stock then you can re-root using the same method you rooted the first time and it will root just fine.
Robbie Doo said:
If it takes you back to full stock then you can re-root using the same method you rooted the first time and it will root just fine.
Click to expand...
Click to collapse
Is this the same as this?
triplepwnu said:
Is this the same as this?
Click to expand...
Click to collapse
Yes, they are the same.
Also, I'm assuming you have all your rooting files already.
Robbie Doo said:
Yes, they are the same.
Click to expand...
Click to collapse
Ok. So I just flash straight through ODIN? Do I have to wipe anything before?
triplepwnu said:
Ok. So I just flash straight through ODIN? Do I have to wipe anything before?
Click to expand...
Click to collapse
Yes, that would be a good idea. PhilZ has a special feature in the factory reset to wipe out everything for installing a new rom. Use that feature and you're good to go.
My v10 downloaded an OTA , which im assuming is 6.0
1. Im rooted on stock 6.0 and unlocked boot loader. Will the OTA work without messing up anything ? Ill have to root again im sure, just want some info before i pull the trigger.
I don't think the update will even proceed being that you're on a rooted ROM. I have that notification too, and i just don't know how to turn it off.
I to am rooted,unlockboot and stock rom. I don't feel like taking a chance. So I used titanium backup to freeze the software update and in the drop down notification if you press it, it's a notification from Google play services if you block it in apps it will disappear from your drop down. I also deleted the update zip in the cache folder.I used es file explorer ,device/cache/update
popwar said:
My v10 downloaded an OTA , which im assuming is 6.0
1. Im rooted on stock 6.0 and unlocked boot loader. Will the OTA work without messing up anything ? Ill have to root again im sure, just want some info before i pull the trigger.
Click to expand...
Click to collapse
Okay, I'm assuming you are on H90120e (system version). There is a root exploit for the H90120j update. You just do the following:
Make a backup of your apps and settings
Flash your phone to the new update (H90120j)?
Take a look at either one of these threads to root your device again:
http://forum.xda-developers.com/tmobile-lg-v10/general/step-step-guide-rooting-lg-v10-using-t3382631
OR
http://forum.xda-developers.com/tmobile-lg-v10/general/root-android-6-0-h901-t3382819
You can't flash the phone that is already rooted and has TWRP.
I am in this same situation. On stock rom with root and twrp. I want to update to the new update, but do not want to loose all my apps, settings, etc.
Question is, how to do the initial update before having to re-root again?
How do we flash the phone with the new update?
bhagiratha said:
You can't flash the phone that is already rooted and has TWRP.
I am in this same situation. On stock rom with root and twrp. I want to update to the new update, but do not want to loose all my apps, settings, etc.
Question is, how to do the initial update before having to re-root again?
How do we flash the phone with the new update?
Click to expand...
Click to collapse
Why can't you flash the phone that is already rooted and has TWRP?
All you are doing is opening the LGUP tool and flashing the new H90120j .kdz file using the "refurbish" option then flashing the H90120j .tot file that has TWRP using the "update" option which will flash the phone regardless of what is running on your phone. The guides on the first link explain that. I believe your concern is keeping all of your settings and apps. Look up Titanium backup, it works for me.
Thank you. I only flash the LGH901AT-01-V20j-310-260-JUL-12-2016-ARB02+0ROOTTWRP tot file and all is good.
Well except that I lost Dolby audio.
I will look for a fix.
jun19inf said:
Okay, I'm assuming you are on H90120e (system version). There is a root exploit for the H90120j update. You just do the following:
Make a backup of your apps and settings
Flash your phone to the new update (H90120j)?
Take a look at either one of these threads to root your device again:
http://forum.xda-developers.com/tmobile-lg-v10/general/step-step-guide-rooting-lg-v10-using-t3382631
OR
http://forum.xda-developers.com/tmobile-lg-v10/general/root-android-6-0-h901-t3382819
Click to expand...
Click to collapse
Hi,
Do I have to use LGUP to install the update or can I click install on the dropdown of my phone?
I'm on stock MM 6.0 (H90120e) Rooted and I will not have access to my main PC for another week as I'm traveling.
Thanks,
-NJ
Anyone?
bhagiratha said:
You can't flash the phone that is already rooted and has TWRP.
I am in this same situation. On stock rom with root and twrp. I want to update to the new update, but do not want to loose all my apps, settings, etc.
Question is, how to do the initial update before having to re-root again?
How do we flash the phone with the new update?
Click to expand...
Click to collapse
There's a guide in general that tells how to do all this. In fact jun19inf WROTE it.
In a nutshell, do a twrp backup.
Upgrade to 20j by flashing the stock 20j kbz.
Enable usb debugging and oem unlock
flash tot that has twrp in it.
Now you can go into twrp and 1) root via supersu 2) restore ONLY data from your twrp backup taken previously to get your apps etc back. Alternatively Titanium Backup will also do just fine.
njdevils28 said:
Hi,
Do I have to use LGUP to install the update or can I click install on the dropdown of my phone?
I'm on stock MM 6.0 (H90120e) Rooted and I will not have access to my main PC for another week as I'm traveling.
Thanks,
-NJ
Click to expand...
Click to collapse
If all is you have is root, you should be able to unroot in the SuperSU settings, and then let the update install. But if you have TWRP, then I can't see any way to do the update without using a PC to flash your phone back to stock ROM and recovery. Although you may check the dev. section to see if Eliminator has a flashable ROM to bring you up to date.
Sent from my LG-H901 using XDA-Developers mobile app
YrrchSebor said:
If all is you have is root, you should be able to unroot in the SuperSU settings, and then let the update install. But if you have TWRP, then I can't see any way to do the update without using a PC to flash your phone back to stock ROM and recovery. Although you may check the dev. section to see if Eliminator has a flashable ROM to bring you up to date.
Sent from my LG-H901 using XDA-Developers mobile app
Click to expand...
Click to collapse
Ah. Thank you very much!
-NJ
Hi all. I just got my factory warranty back and I attempted to root it. Everything went as it should, until just after the install finished. Instead of rebooting normally, it now will only reboot into TWRP. Once there, when I try to flash a custom ROM (in this case, Bliss, but I don't think it matters, I get an error message that says the zip file is corrupt. Then, while still in recovery, when I tried to wipe everything except the sd card, it says mkfs.fat process ended with error. I then powered down and attempted the factory reset. I scrolled down on both screens and it did not say anything about any errors, so I assumed it took. However, it reboots right back into TWRP recovery. It also boots right to TWRP recovery when I try to boot normally. Of course, adb does not recognize the phone in any mode that I can get into (fastboot/recovery/download), so, I can't use LG Bridge to reflash the original firmware. Does anybody have any ideas for a fix? I know that this replacement phone had 6.0 on it. I thought I did everything to a t? TIA...
OK, not sure how I got there, but when I attempt to reboot from TWRP it says No OS Installed! Are you sure you want to reboot? That at least says what the problem is. Does anybody know how to fix this?
Where can I download the update file?
wbexpress said:
Hi all. I just got my factory warranty back and I attempted to root it. Everything went as it should, until just after the install finished. Instead of rebooting normally, it now will only reboot into TWRP. Once there, when I try to flash a custom ROM (in this case, Bliss, but I don't think it matters, I get an error message that says the zip file is corrupt. Then, while still in recovery, when I tried to wipe everything except the sd card, it says mkfs.fat process ended with error. I then powered down and attempted the factory reset. I scrolled down on both screens and it did not say anything about any errors, so I assumed it took. However, it reboots right back into TWRP recovery. It also boots right to TWRP recovery when I try to boot normally. Of course, adb does not recognize the phone in any mode that I can get into (fastboot/recovery/download), so, I can't use LG Bridge to reflash the original firmware. Does anybody have any ideas for a fix? I know that this replacement phone had 6.0 on it. I thought I did everything to a t? TIA...
OK, not sure how I got there, but when I attempt to reboot from TWRP it says No OS Installed! Are you sure you want to reboot? That at least says what the problem is. Does anybody know how to fix this?
Click to expand...
Click to collapse
Did you select refurbish or upgrade?
I believe you need to select upgrade when flashing or you get stuck in TWRP
Sent from my LG-H901 using XDA-Developers mobile app
How to root V10 T-mobile M.M ver V20L
How to root V10 T-mobile M.M ver V20L
Can some one guide me on the following:
1. Can I flash back and downgrade to Software version V20J from V20L.
2. Is there any root method for V10 t-mobile MM ver V20L.
1. It is well explained in this forum, you CANNOT go back without facing a software brick.
2. You can root your phone through Dirty_Cow method or by flash Eliminater74 ROM (Part1 & Part2).
Again, search for that in this section and in development one...
jonsat said:
1. It is well explained in this forum, you CANNOT go back without facing a software brick.
2. You can root your phone through Dirty_Cow method or by flash Eliminater74 ROM (Part1 & Part2).
Again, search for that in this section and in development one...
Click to expand...
Click to collapse
Thanks so much for your reply, I was about to flash it to downgrade my V10 from V20L to V20J i even downloaded the files for it Phew....
Okay, I have searched most of the rootings are V20J i have not found a method for rooting and twrp for V20L software update.
Please if u can share the link, that would be helpful...
thanks regards,
I wonder how people perform searches... by the way, few lines under this very thread, there is:
https://forum.xda-developers.com/tmobile-lg-v10/general/root-20l-dirty-cow-t3498722
jonsat said:
I wonder how people perform searches... by the way, few lines under this very thread, there is:
https://forum.xda-developers.com/tmobile-lg-v10/general/root-20l-dirty-cow-t3498722
Click to expand...
Click to collapse
Awwhh GOD!!! big thanks for your help, u r truly an awesome person. Peace and blessing upon u.
regards,