How to better performance on tipo - Sony Xperia Miro, Tipo (Dual), J, E

Should I install any tweaks or something i want to improve my phone and also gaming performance.Give me any opinions

QUOTE=cipjanin;35437922]Should I install any tweaks or something i want to improve my phone and also gaming performance.Give me any opinions[/QUOTE]
try this: http://forum.xda-developers.com/showthread.php?t=2044868
Regards,
Jorge Moreira

Yes tweak it and try to keep the RAM usage at a minimum

try this if u aren't rooted and unlocked bl
http://forum.xda-developers.com/showthread.php?t=2173872
if bl unlocked flash vengeance kernel though it is at developing stage it is very good(better than stock kernel) at 800mhz
i get antutu benchmark 3183 on stock kernel'
on vengeance i get 3892 at 800mhz and soomth gaming also u can oc upto 850mhz presently and play games like temple run and subway surfers but not intense 3d games(1.38 version)
1.40 to be released
http://forum.xda-developers.com/showthread.php?t=2134810;)

Related

Please help me about Kernel !

sory my bad english.
i have rom 2.3.4 . ( s-off, recovery, root done)
i want file kernel can Power Saving batteri ?
i disconnect wifi, buletooth , GPS, use GSM, but my phone use ~160mAH in standy ! hix
You should Try The Bricked Kernel http://forum.xda-developers.com/showthread.php?t=1256668
But be Carefull and Read Step for Step how to Flash it.
And Next Time you ask Something Plz give more Informations,do you use a Stock Rom?
Mod Rom?
And do you Use a App for Controling Cpu Speed etc?
Maybe you just have the Cpu Speed Set wrong when the Screen is Off
i set cpu low ( 192 ghz) when SCreen is off.
App for controling cpu : Cpu mater / onemand.
Stock rom 2.3.4. sense 3.0 ( remove app not use)
kernel you post :http://forum.xda-developers.com/showthread.php?t=1256668
have OC GPU but i don't want. hix . then i need app to see infomation GPU ?
Please help me ! thank
please ! help me.....
if you want features and pretty good battery life, go with the suggested bricked kernel, although it may still have bugs
if you want everything working perfectly, you control overclock, no gpu overclock (to my knowledge), practically no features, fast, excellent battery life (best if you ask me). go with stock or trinity, i suggest trinity though set them to ondemand
trinity
http://forum.xda-developers.com/showthread.php?t=1387690
stock
http://forum.xda-developers.com/showthread.php?t=1372649

Adam Kernel benchmark scores/ discussion thread/ OC? who needs it,.

I've tested oc kernels and came back to Adam Kernel and to my surprise this is the fastest one of all.
So i ask you all, do we really need to oc ore is stock values the best values?
Screenshot full antutu run

MT6577 1GHZ overclock to 1,68 - phone crash ofter offten ( prestigio 4500 duo )

How much should i overclock this CPU to not make phone crash (Prestigio 4500)?
circa 1,4 phone works good, but hot, if i overclock to 1,68 or 1,7x phone crash after boot, i use to OC modified kernel from china phones rom (bedove or something like that) ..
Guys, what method to OC is better...
I change voltage etc, but cant make it stable..
thx
Hey
dromaczek said:
How much should i overclock this CPU to not make phone crash (Prestigio 4500)?
circa 1,4 phone works good, but hot, if i overclock to 1,68 or 1,7x phone crash after boot, i use to OC modified kernel from china phones rom (bedove or something like that) ..
Guys, what method to OC is better...
I change voltage etc, but cant make it stable..
thx
Click to expand...
Click to collapse
Hey brother you should not go over 1.3 ghz. There is mtk6577 processor which run on 1ghz and your is already overclocked to 1.2. Can u please share that kernel you have? I have mtk6577 and would like to try it. Thanks
lukasrb said:
Hey brother you should not go over 1.3 ghz. There is mtk6577 processor which run on 1ghz and your is already overclocked to 1.2. Can u please share that kernel you have? I have mtk6577 and would like to try it. Thanks
Click to expand...
Click to collapse
hi, i dont have now mtk6577 phone pretigio, now i have zopo zp998,and use it..
If your phone is a 1ghz, then OC to 1.5 is max you want to go. There are write ups here on XDA, just search. Going too high starts putting too much of a stain on the system. Under voltage can help, but you just can't be applying settings without knowing what they will actually do. There are write ups on XDA about that as well.
Try disabling your animations and other performance robbing settings and run the phone at 1.3 or 1.4. Other than that, you have some reading ahead of you. And make sure you backup up everything, before you apply settings to boot!!
Hit thanks if I helped.
delivered to you piping hot and fresh through quantum physics and pony express

[Q] Noob here..Help me with my settings please??

Hi Everyone
I have a samsung S3 I9300 version 4.3
Have googy-max 2.2.1.4 kernel
have stweaks n setcpu (light version)
running rom: wanamLite V7.2
I would like my phone to be snappier and faster..would like to overclock for top performance when gaming a bit.
Was hoping if someone could advise me on correct settings for "setcpu" and stweaks for my particular kernel please..I have no clue on messing with these things...
thanks much
kabuchi said:
Hi Everyone
I have a samsung S3 I9300 version 4.3
Have googy-max 2.2.1.4 kernel
have stweaks n setcpu (light version)
running rom: wanamLite V7.2
I would like my phone to be snappier and faster..would like to overclock for top performance when gaming a bit.
Was hoping if someone could advise me on correct settings for "setcpu" and stweaks for my particular kernel please..I have no clue on messing with these things...
thanks much
Click to expand...
Click to collapse
you can try getting performence controller, it can overclock for you and set governers so it with clock higher when you are playing games.
Hi Trozzul
thanks for response. Unfortunately performance is not applicable with this kernel etc..right now im on governor zzmoove... but need help with settings for optimum performance...lol
thanks for the help
ps: if you have any other suggestions, please feel free to fire away...
cheers

Games lagging issue

m getting lagging issue in xperia l. M on cm12 beta 2 even temple run2 and daddy was a thief this games are lagging.
It happens with me even when i used cm11 don't know what's wrong i does but please help me out if there is any solution.........
its on beta stage ...what do u expect??
Red Devil 99 said:
m getting lagging issue in xperia l. M on cm12 beta 2 even temple run2 and daddy was a thief this games are lagging.
It happens with me even when i used cm11 don't know what's wrong i does but please help me out if there is any solution.........
Click to expand...
Click to collapse
cm12 is on beta stage so u cannot expect games to run smoothly
maybe because of ART runtime
and about cm11
i had no issue with games all of them work fine
and one more thing
NEXT TIME DONT PUT A QUESTION OR HELP POST IN THE GENERAL SECTION WE HAVE AN INDIVIDUAL HELP SECTION...
http://forum.xda-developers.com/xperia-l/help
Red Devil 99 said:
m getting lagging issue in xperia l. M on cm12 beta 2 even temple run2 and daddy was a thief this games are lagging.
It happens with me even when i used cm11 don't know what's wrong i does but please help me out if there is any solution.........
Click to expand...
Click to collapse
games do not run smoothly on any of the custom roms for xperia l .. i have tried cm, aokp, c rom etc with every possible kernel you can imagine_even with the highest performance of thunderzap kernel i wasn't able to play the game with no lag (here i am talking about games like asphalt 8, gta san andreas, modern combat 4 or 5)
but you might be able to play small games like temple run etc .. just set the max frequency to 1.6 ghz and the governor on performance_do set GPU governer to performance as well
also .. if you are looking for a gaming device then stay with stock ftf and stock kernel ..
but if you want battery life and multitasking then try cm11 with thunderzap kernel_
lastly, do not post such questions in the general section
hope i helped
thnx n sorry for posting this in general. i posted this in help n troubleshooting section

Categories

Resources