Hello, i went from Magicmod cm10 to NUMA, the installation proceeded correctly. Then I reebooted the phone and it stuck in the NUMA boot animation.
Already tried FXZ back to 2.3.5 but it gives me flash failure 5/19 flash cdt.bin. Really Don't know what to do, any help will be appreciated
Thanks in advance
Tried again and it says 5/20 reboot-bootloader, did i just hardbricked?? please help
Joseaiz said:
Hello, i went from Magicmod cm10 to NUMA, the installation proceeded correctly. Then I reebooted the phone and it stuck in the NUMA boot animation.
Already tried FXZ back to 2.3.5 but it gives me flash failure 5/19 flash cdt.bin. Really Don't know what to do, any help will be appreciated
Thanks in advance
Tried again and it says 5/20 reboot-bootloader, did i just hardbricked?? please help
Click to expand...
Click to collapse
Nope, u using the wrong FXz script try the ICS one mate. Correct me if I'm wrong but u shouldn't be trying to FXz back to 2.3.5
Sent from my SuperCharged CM10 MB865
triloger said:
Nope, u using the wrong FXz script try the ICS one mate. Correct me if I'm wrong but u shouldn't be trying to FXz back to 2.3.5
Sent from my SuperCharged CM10 MB865
Click to expand...
Click to collapse
well that's what I did, i should have used Jim's script. That happens when you don't read, now my phone it's totally bricked :crying:
Correct no one should be trying to fxz back to gingerbread with the ICS fxz out. Hopefully your phone's under warranty mate?
Sent from my SGH-I727 using xda premium
Related
*Do not use this if coming from ICS 4.0.4. Only use this if on 2.3.6 or below. *
http://www.androidfilehost.com/main/Motorola_ATRIX_2_Developers/Return To stock 2.3.5/
Auto .bat that returns phone to stock 2.3.5 using Moto-fastboot comands, alternative to manual fastboot, and RSD.
Separate webtop.bat file to flash webtop, and return to stock.bat, to flash everything but webtop.
Boot phone into fastboot
Click on Stock_Restore.bat to flash stock 2.3.5 files minus webtop
Click on webtop.bat to flash webtop .img
will this work coming from 2.3.6?
Sent from my MB865 using XDA
mrjrod said:
will this work coming from 2.3.6?
Sent from my MB865 using XDA
Click to expand...
Click to collapse
Its uploaded
I flashed it over supercharged rom v5 thats based on 2.3.6, so it should work yes.
but would this downgrade from stock 2.3.6 stock ?
iB4STiD said:
but would this downgrade from stock 2.3.6 stock ?
Click to expand...
Click to collapse
Yes it should, I used the Fastboot files listed on the noob guide, and this "How to flash the FXZ once applying the OTA update and get back to 2.3.5, ONCE YOU UPDATE TO THE OTS 2.3.6 YOU WILL NOT BE ABLE TO FLASH THE 2.3.5 FXZ WITHOUT FOLLOWING THESE STEPS BELOW!!
NOTE: Download this file HERE -
Unzip it and move all the the items in it to the stock fxz. You might get a warning about replacing files, just click OK. NOTE that Windows might not be able to handle the size of the fxz. I have 6 GB RAM but Windows still wasn't able to perform a drag-and-drop through the fxz's zip. I recommend that you just unzip the fxz and then put the files in. (You don't have to rezip it either, RSD Lite will still recognize it and will flash faster).
You should be able to use RSD Lite to flash the file.
THANKS TO COGEARY FOR THESE STEPS
" that's all there, so you should be able to flash over stock 2.3.6, boot into fastboot and run this
worked flawlessly from 2.3.6 with the failed fastboot issue. nice work! thanls
Sent from my MB865 using xda premium
mrjrod said:
worked flawlessly from 2.3.6 with the failed fastboot issue. nice work! thanls
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
Awesome glad to hear someone else had success . used this few times myself well working on rebelROM lol
This worked perfect!!! I transferred the extra files and hit start and 10 minutes later my beautiful brick was alive again. Thanks
Sent from my MB865 using xda premium
thanks alot for this. fixed my phone with it after an incident with the wrong framework-res.apk found my phone put me in a boot loop and had no other choice but to use this. again thanks this is a big help. not everything flashed successfully but it did work, and im back rooted and running a custom rom again. goodtimes!!!!
how do you boot into fastboot?
okachowwa said:
how do you boot into fastboot?
Click to expand...
Click to collapse
when powering on, hold both volume keys at the same time. A menu will show up.
Sent from my MB865 supercharged.
Patience is a virtue.
Is this to put on the sd card or what? I'm not seeing any options to use this.
thezoolander said:
Is this to put on the sd card or what? I'm not seeing any options to use this.
Click to expand...
Click to collapse
Instead of using RSD to flash stock, you can use this automatic script.
I've never had to flash a fxz either. So i'm not totally understanding it. Do we flash the zip from our sd card on our phones without a computer involved? Do we extract the zip first. I'm bewildered :banghead:
I don't have a windows box so none of that rsd stuff applies either. If this could work for me I'd be grateful to anybody for explaining it. Also, more willing to experiment haha.
Sent from my MB865 using XDA
KEB64 said:
I've never had to flash a fxz either. So i'm not totally understanding it. Do we flash the zip from our sd card on our phones without a computer involved? Do we extract the zip first. I'm bewildered :banghead:
I don't have a windows box so none of that rsd stuff applies either. If this could work for me I'd be grateful to anybody for explaining it. Also, more willing to experiment haha.
Sent from my MB865 using XDA
Click to expand...
Click to collapse
It's a Windows batch file that uses fastboot commands to flash the contents of an fxz to your phone. Since you're on Linux then it wouldn't work for you, but it wouldn't be hard to make a shell script adaptation of it.
Ah ha! More clues haha. I understand what your saying. I need to get that process down so I can have more confidence in my own development.
Sent from my MB865 using XDA
this is a set of windows command prompt commands that flashes a new system image using fastboot. useless on Linux. you could try to adapt it to run in linux terminal.
Sent from my MB865 using XDA
So...I download that, have my A2 plugged in to USB and then double click the .bat?
Chrisruns said:
So...I download that, have my A2 plugged in to USB and then double click the .bat?
Click to expand...
Click to collapse
Yep. Just make sure you have Settings -> Applications -> Development -> USB Debugging enabled.
dude i wrote a faulty 2.3.6 from asiaopps and u just saved my phone!!! thank you!!!!
Hello all, I need your help. Today I flashed a zip on a whim, and it has ruined my whole day.
I have managed to get back to CWM v2.5.1.3 RED, and can flash zips and clear cashes, all that. But when I reboot, it brings me right back to CWM. Any help for me? I am lost.
Thanks in advanced,
Nate
P.S. I am not afraid of the command line.
Try odin?
I have tried GTG Unbrick. That's how I've gotten as far as I have.
How long does it usually take? I'm staring at the Odin screen for about 5mins now and it still says "Set Partition" and "DO NOT TURN OFF TARGET!!"
Alright, FIXED, I just needed to keep retrying. It took like 5 attempts to get it going right.
Nate_the_Ace said:
Hello all, I need your help. Today I flashed a zip on a whim, and it has ruined my whole day.
I have managed to get back to CWM v2.5.1.3 RED, and can flash zips and clear cashes, all that. But when I reboot, it brings me right back to CWM. Any help for me? I am lost.
Thanks in advanced,
Nate
P.S. I am not afraid of the command line.
Click to expand...
Click to collapse
Have you tried....
http://forum.xda-developers.com/showthread.php?t=1524081
Sent from my SAMSUNG-SGH-I997 using Tapatalk 2 Beta-5
I am ALSO stuck in a CWM boot loop.
i have the same problem as well..
IF I were to guess what i did wrong it would be.. when i tinkered with the partitions
I tried Odin, Heimdall, and GTG unbrick link is not available anymore..
ummhii said:
i have the same problem as well..
IF I were to guess what i did wrong it would be.. when i tinkered with the partitions
I tried Odin, Heimdall, and GTG unbrick link is not available anymore..
Click to expand...
Click to collapse
bradman117 was kind enough to put together a thread with links to older Infuse roms and recovery options. One of his links should work. Just be sure to slap him a thanks.
... i am facing this problem and i have tried so many times that i am too pissed off to count. Tried Odin many times.
after odin back to UCLB3, phone works normally but when flashing cm9 from CWM Red phone boots to Blue CWM recovery again and wont boot no matter how many times i flash cm9. goes back to recovery everytime it boots. even tied 2 different builds of cm9. now its beyond my imagination so askin you people for help ...
chetansaraf said:
... i am facing this problem and i have tried so many times that i am too pissed off to count. Tried Odin many times.
after odin back to UCLB3, phone works normally but when flashing cm9 from CWM Red phone boots to Blue CWM recovery again and wont boot no matter how many times i flash cm9. goes back to recovery everytime it boots. even tied 2 different builds of cm9. now its beyond my imagination so askin you people for help ...
Click to expand...
Click to collapse
If you have flash the CM9 once you have now to mount the system and flash again the CM9....
Here take a look of this video this is not the CM9 but this is how you should flash any ics for the infuse..
https://www.youtube.com/watch?v=ndC39t1AE-k&feature=youtube_gdata_player
Sent from my SGH-I997 using XDA Premium 4 mobile app
alexischino said:
If you have flash the CM9 once you have now to mount the system and flash again the CM9....
Here take a look of this video this is not the CM9 but this is how you should flash any ics for the infuse..
https://www.youtube.com/watch?v=ndC39t1AE-k&feature=youtube_gdata_player
Sent from my SGH-I997 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
... thanx buddy for help but already running 4.3. i cant believe what i was missing. i was just rebooting the recovery where i needed to reboot the system after flashing cm9 1st time. and when i did, wowwww no problems and now phone runnin on 4.3. butterly smooth ...
I was flashing Supercharged V5 Rom and followed all the instructions step by step, everything went fine until I rebooted and now I'm stuck in the boot loop.
I can't access CWM no matter what methods I try.
How can I get out of this so I can re-flash my back up and get to stock again?
first off it sounds like you need to flash the FXZ to get your phone back.
here is a link for that. http://forum.xda-developers.com/showthread.php?t=1607083
when you did the restore, did you wipe/factory reset, wipe cache/dalvik?
Yes I did all that it said to do, I'm not sure where went wrong. I never had an issue with rom's on my OG Atrix.
Thank you so much for the FXZ, I couldn't find it anywhere and that's all I need. Just a soft brick
Your welcome.
Sent from my MB865 using xda premium
I'd flash the the cwm on boot mod so you can always restore. I speak from experience. Ive been where you are before
Sent from my MB865 using XDA
Elaborate?
thezoolander said:
Elaborate?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1606257
I have used the other one without problems too bu this should work. You will always boot into cwm so you can restore if softbricked. Hit reboot to boot normallu
Sent from my MB865 using XDA
Okay so I'm using the script method described here:
http://forum.xda-developers.com/showthread.php?t=1539167
However I find it unclear of what exactly to do with the script?
I'd rather use this before using RSD.
Its the same thing essentially. Never used it though
Sent from my MB865 using XDA
So using the method you posted, how am I supposed to access those two apps needed in order for it to work?
If you are still bricked you have no choice but to fzx back to stock. Then root and install the bootstrap. Backup. Do the cwm on boot stuff. Flash your desired rom. Now if you bootloop you can pull the battery a.d your back un cwm to restore a backup or reflash
Sent from my MB865 using XDA
Okay yeah I was confused for a minute. I'm just waiting for the FXZ to finish downloading.
Good luck and backup often. Dont forget the thanks button exists if ive helped
Sent from my MB865 using XDA
Thank you very much!
Now my problem is RSD doesn't want to recognize my phone. I have all the latest drivers, current version of RSD and everything. Running as administrator as well.
thezoolander said:
Thank you very much!
Now my problem is RSD doesn't want to recognize my phone. I have all the latest drivers, current version of RSD and everything. Running as administrator as well.
Click to expand...
Click to collapse
Do u have debuging mode on?
boot into fastboot
Sent from my MB865 using XDA
I recently flashed SKYICS onto my Skyrocket. After flashing it is stuck in a bootloop and will not get past the ICS boot animation. What can I do to fix this?
You can post this in the Q&A section for starters......
Daking12794 said:
I recently flashed SKYICS onto my Skyrocket. After flashing it is stuck in a bootloop and will not get past the ICS boot animation. What can I do to fix this?
Click to expand...
Click to collapse
The best thing to do is follow his instruction to the dime....make sure you wipe data,cache, dalvik cache and format /system at least three times to be safe, that might be overdoing it but it definetly helps
Do you have a backup? If you do boot into clockworkrecovery to restore Rember playing around with these roms is like having sex you must stay protected if you dont have a backup I recommend pulling the battery out, put it back in and force it into download mode, then just run a Odin one click of the new leak and you should be running again waffle house dude is right though next time if you have a question post in Q&A please anymore problems just ask the community somebody like me will be more than happy to help your gangster ass out ha
Daking12794 said:
I recently flashed SKYICS onto my Skyrocket. After flashing it is stuck in a bootloop and will not get past the ICS boot animation. What can I do to fix this?
Click to expand...
Click to collapse
Just out of curiosity, which exact version did you flash?
Sent from my SAMSUNG-SGH-I727 using xda premium
Daking12794 said:
I recently flashed SKYICS onto my Skyrocket. After flashing it is stuck in a bootloop and will not get past the ICS boot animation. What can I do to fix this?
Click to expand...
Click to collapse
Plug into computer...open command prompt..start ADB..type ADB -Wait for device- reboot recovery .. Reflash a ROM from from recovery
Sent from my SAMSUNG-SGH-I727 using xda premium
Daking12794 said:
I recently flashed SKYICS onto my Skyrocket. After flashing it is stuck in a bootloop and will not get past the ICS boot animation. What can I do to fix this?
Click to expand...
Click to collapse
I saw your multiple posts in the dev thread. You probably got a bad download. Re-download and check the md5
AT&T replaced my Infuse (which I was running JB and before that ICS), so I have a brand new phone.
Came stock with G 2.3.6.
I was able to flash jscott30 2.3.6 Gingerbread with root and CWM recovery option - link below. I chose option C. Phone is running great.
http://forum.xda-developers.com/showthread.php?t=1613523
However, when I try to upgrade to a custom ICS or JB rom (doesn't matter which one) from CWM, the phone soft-bricks - meaning when it resets it's either stuck in Samsung boot loop or that crashed recovery loop.
I have to reflash in download mode to the link above, which thankfully works!
Bottom line - I can't flash any ICS or JB and can't figure out what the deal is. I had no problems flashing before with my old Infuse.
I'm clearly doing something wrong - any ideas? I know I'm not providing a lot of info, but I'm following each flash instruction to the letter (in each OP).
Thanks for any insight!
I don't want to wait for Samsung to upgrade to ICS - if they ever do.
I know it might be a dumb awnser/reply. But did u happen to pull battery out and reflash after it froze? Sometimes that helps. If u have there is nothing wrong from starting back from the start.. cm9 I use for my ICS boot loaderz and then I try whatever else I want. But I always start from. Ginger bread to entropy cm9
sent with my jelly SGH-I997R
jester12345 said:
I know it might be a dumb awnser/reply. But did u happen to pull battery out and reflash after it froze? Sometimes that helps. If u have there is nothing wrong from starting back from the start.. cm9 I use for my ICS boot loaderz and then I try whatever else I want. But I always start from. Ginger bread to entropy cm9
sent with my jelly SGH-I997R
Click to expand...
Click to collapse
Yeah, I do pull battery.
Where can I find the entropy cm9? Thanks!
Have u tried a different ROM. I had problems before with corrupt d/L's
Just some suggestions for thought
sent with my jelly SGH-I997R
jester12345 said:
Have u tried a different ROM. I had problems before with corrupt d/L's
Just some suggestions for thought
sent with my jelly SGH-I997R
Click to expand...
Click to collapse
Yes, I've tried many different ROMs. Each fails. So weird.
Which CWM do you have. I know that after I flashed the rooted GB version, I then flashed the Heimdall ICS recovery and CWM went to blue version. Then very easy to install ROMs.
Sent from my SGH-I997 using xda premium
psal217050 said:
Which CWM do you have. I know that after I flashed the rooted GB version, I then flashed the Heimdall ICS recovery and CWM went to blue version. Then very easy to install ROMs.
Sent from my SGH-I997 using xda premium
Click to expand...
Click to collapse
Red 2.5.1.3
Should I flash the blue? Thanks.
delfinparis said:
Red 2.5.1.3
Should I flash the blue? Thanks.
Click to expand...
Click to collapse
Yes.
psal217050 said:
Yes.
Click to expand...
Click to collapse
There shouldn't be any need to manually install CWM, as the ROM zips have the udated CWM built into them. Since you're coming from GB, the first reboot after installing ICS or JB, should boot you into the new BLUE CWM, after which you may need to format System, and flash again. Also, have you removed your External SD card before flashing? That's caused problems for some people.
My concern is that he said he flashed ICS but still has red CWM. I suggested Heimdall ICS recovery to get him to blue. I am relatively new but that is what I had to do to get ICS on the phone. But I am sure that there are other methods too.
Sent from my SGH-I997 using xda premium
Yep - did the Heimdall and it pushed me to blue CWM. I'm good now!
Just flashed ParanoidAndroid ICS and it's working.
thanks!
psal217050 said:
My concern is that he said he flashed ICS but still has red CWM. I suggested Heimdall ICS recovery to get him to blue. I am relatively new but that is what I had to do to get ICS on the phone. But I am sure that there are other methods too.
Sent from my SGH-I997 using xda premium
Click to expand...
Click to collapse
Odd. Never ran into that issue yet, and, as such, didn't notice that there was a Heimdall ICS one-click kernel floating about. Great advice.