hi guys im having trouble with my alcatel 918 i did flash it through mediatek flash tool.. im about to downgrade it from 2.3.6. to 2.3.5 but things go wrong i accidentally format my nvram...i did tried to flash it again but i had this error no partitionon table available,, or sometimes failed to get dram...when i tried to go for one touch upgrade of alcatel (a support app) from alcatel it says my phone is already on its higher version...one thing more i cant even go to its recovery mode anymore...my phone is totally dead but still recognize by mediatek flash tool...any help is much appreciated...i just wanted to revive my phone...thanks guys..
If you lost the partition table, I think you need to format the flash first. Did you try the format button in the mediatek flash tool? Or is that how you lost the partition table in the first place?
Related
I have got a chinese clone phone with MTK6573V which was bricked by flashing a wrong firmware image via CWM-based custom recovery BUT after flashing the wrong firmware my phone cant even boot not even in recovery mode.Nor i am able to write Recovery via SP Flash Tool v2.1134.00 it always give me error :
BROM ERROR:S_DL_GET_DRAM_SETTING_FAIL(5054)
[EMI]obtain DRAM Failed!
[HINT]lease check your load matches to your target which is to be download.
http://img838.imageshack.us/img838/3817/mtkerror.jpg
My phone is only able to make MTK PRELOADER PORT nothing else, no back light, no recovery mode
And now my phone also dont make MT65x3 USB VCOM Port so i am only able to connect phone with SP TOOLS when DA DOWNLOAD ALL is enabled otherwise it wont connect
mtk6573
hello there
i read your post and you has exacly the same problem im having with my phone.
did you manage to solve the problem?
if you did can you please help me out.
Thx
I have the same problem.
It`s bricked, nothing works and i cannot even upload the preloader or anything
EDIT : Upgraded to latest SP Flash tool and now i get a new error 5007
I have the same problem in MTK6575. Any solution?
B.R.
check the following link may be that will be helpful for you guys
http://www.labandroid.com/china/2013/02/flash-cwm-recovery-to-mtk-phones-without-sp-flash-tool/
Hello,
I have a chines smartphone named Alps AW880. It uses an MT6577 chipset. I was trying to instal CWM on it which failed because of the signature verification. I used SP flash tool and that worked fine but everytime the phone tries to boot into recovery, it turns black and restart. I tried this tens of times got frustrated and formatted whole flash I don't have my stock ROM or recovery and have no idea which custom recovery will work. The phone is still detected on SP flash tool and I'm able to flash recovery.img but it doesn't work. Now the phone is not turning on at all.
I need help please can this be unbricked?
my hisense u989 is hanging on boot. when i tried flashing it with miracle box it says YOU NEED TO FORMAT WHOLE FLASH. I tried to format but it still gives this: ERR2. I have tried memory test with sp flash tool but still i get this: NAND FLASH NOT DETECTED. Can someone help me please
I have an old Bluboo S3 phone with Android 8.1 (Mediatek processor).
Its main board corrupted so I ordered a refurbished one.
It had a bootloop issue so I tried to flash new stock rom to it.
I accidentally formatted the bootloader and now I'd have to unbrick it.
My Windows 10 computer recognizes it as Mediatek device but when I try to flash a stock bootloader to my phone, I'll get an error message ERROR STATUS_DA_HAS_MISMATCH 0xC0070004.
How do I get rid of that message and be able to flash a new bootloader to my phone?
Or should I just trash it?
Any help is highly appreciated!
P.S. I have a full TWRP back up from another similar phone. Can that be used to flash a new ROM to the phone (from the computer?)
Hello, I have an X27 PLUS chinese phone with MT6572 processor and kitkat 442. I rooted him with Kingroot. Then I wanted to flash twrp. Аnd here I made a mistake. Since I didn't have a sd card, I decided to flash the TWRP directly on the phone with "Easy Magic TWRP" 2.8.1.0.
After the flash, it showed me that the installation was completed successfully. But the phone is already in boot loop. The only thing that works is Fast Boot. But I can't flash the stock image recovery file, it tells me that the flash sector can't be flashed (or doesn't support flash). I have a backup made with the help of Droid Tool and SP Flash Tool.The problem is that the flash tool cannot connect to the phone.
I have all the drivers installed, and before flashing the TWRP, the phone was recognized by the software.
Is there any way to solve this problem?
Ps:I am writing in the forum for the first time and I apologize if I am not in the right topic.
cybrax said:
Hello, I have an X27 PLUS chinese phone with MT6572 processor and kitkat 442. I rooted him with Kingroot. Then I wanted to flash twrp. Аnd here I made a mistake. Since I didn't have a sd card, I decided to flash the TWRP directly on the phone with "Easy Magic TWRP" 2.8.1.0.
After the flash, it showed me that the installation was completed successfully. But the phone is already in boot loop. The only thing that works is Fast Boot. But I can't flash the stock image recovery file, it tells me that the flash sector can't be flashed (or doesn't support flash). I have a backup made with the help of Droid Tool and SP Flash Tool.The problem is that the flash tool cannot connect to the phone.
I have all the drivers installed, and before flashing the TWRP, the phone was recognized by the software.
Is there any way to solve this problem?
Ps:I am writing in the forum for the first time and I apologize if I am not in the right topic.
Click to expand...
Click to collapse
Hey I got one of them x27 plus wish phone....mtk6572 4.4.2 kitkat .....for true info on device install "device info hw" green icon and activity launcher .....check out the info it gives compared to info from ph settings menu.....but my question did you find way to root of flash a generic android rom?
I used kingroot with laptop.