my hisense u989 is hanging on boot. when i tried flashing it with miracle box it says YOU NEED TO FORMAT WHOLE FLASH. I tried to format but it still gives this: ERR2. I have tried memory test with sp flash tool but still i get this: NAND FLASH NOT DETECTED. Can someone help me please
Related
I have got a chinese clone phone with MTK6573V which was bricked by flashing a wrong firmware image via CWM-based custom recovery BUT after flashing the wrong firmware my phone cant even boot not even in recovery mode.Nor i am able to write Recovery via SP Flash Tool v2.1134.00 it always give me error :
BROM ERROR:S_DL_GET_DRAM_SETTING_FAIL(5054)
[EMI]obtain DRAM Failed!
[HINT]lease check your load matches to your target which is to be download.
http://img838.imageshack.us/img838/3817/mtkerror.jpg
My phone is only able to make MTK PRELOADER PORT nothing else, no back light, no recovery mode
And now my phone also dont make MT65x3 USB VCOM Port so i am only able to connect phone with SP TOOLS when DA DOWNLOAD ALL is enabled otherwise it wont connect
mtk6573
hello there
i read your post and you has exacly the same problem im having with my phone.
did you manage to solve the problem?
if you did can you please help me out.
Thx
I have the same problem.
It`s bricked, nothing works and i cannot even upload the preloader or anything
EDIT : Upgraded to latest SP Flash tool and now i get a new error 5007
I have the same problem in MTK6575. Any solution?
B.R.
check the following link may be that will be helpful for you guys
http://www.labandroid.com/china/2013/02/flash-cwm-recovery-to-mtk-phones-without-sp-flash-tool/
hi guys im having trouble with my alcatel 918 i did flash it through mediatek flash tool.. im about to downgrade it from 2.3.6. to 2.3.5 but things go wrong i accidentally format my nvram...i did tried to flash it again but i had this error no partitionon table available,, or sometimes failed to get dram...when i tried to go for one touch upgrade of alcatel (a support app) from alcatel it says my phone is already on its higher version...one thing more i cant even go to its recovery mode anymore...my phone is totally dead but still recognize by mediatek flash tool...any help is much appreciated...i just wanted to revive my phone...thanks guys..
If you lost the partition table, I think you need to format the flash first. Did you try the format button in the mediatek flash tool? Or is that how you lost the partition table in the first place?
so i tried flashing gravitymod's CMW to my W8 via SP flash tool. at first it did not work...after playing around i finally got CMW to load up and was able to flash the gravity mod rom...it turned out to be a cache error. well the rom booted up and quickly realized.........my phone would not recognize sim cards, there was no "reboot" option in the power menu and lastly no "navigation" app anymore .....and would not reboot to recovery from CMW
so being being that alot of issues were present i decided to re-flash everything with "SP Flash"
same issues were present... so desperately i just started trying stuff....dumb i know..
well in "SP Flash Tool" i went to the "Format" tab & accidentally hit "format whole flash"
so now the phone is completely bricked and wont power on. However my computer still recognizes the phone as "Mk usb device" or whatever.
"SP flash tool" wont let me flash anything and gives me this error...
""BROM ERROR : S_DL_GET_DRAM_SETTING_FAIL(5054) [EMI] Obtain DRAM Failed! [HINT]: Please check your load matches to your target which is to be downloaded.""
THL's links are down for an official rom restore... and they have virtually no support. little to no info on the web.. and my work phone is useless....please help me... atleast get it to boot!!!!!!! im begging you guys!!! ill pay via paypal!!
lenovo s820
I have the same problem BROM Error (5054)
Happens after following this link h ttp: // w w w.indragunawan.com/2013/09/installing-miui-v5-rom-on-lenovo-s820. html
Maybe I need the Lenovo S820 original scatter file.
:crying:
Please help me
Hello,
I have a chines smartphone named Alps AW880. It uses an MT6577 chipset. I was trying to instal CWM on it which failed because of the signature verification. I used SP flash tool and that worked fine but everytime the phone tries to boot into recovery, it turns black and restart. I tried this tens of times got frustrated and formatted whole flash I don't have my stock ROM or recovery and have no idea which custom recovery will work. The phone is still detected on SP flash tool and I'm able to flash recovery.img but it doesn't work. Now the phone is not turning on at all.
I need help please can this be unbricked?
Hi there guys @ xda.
I need help with my mtk6572 phone which i bricked in a noob way.
I need help flashing it with SP Flash Tool which gives an error as described in title.
Here is how i bricked it.
Today i decided that i want to flash a custom recovery on my phone, so i did and it worked.
I experienced a bug on the recovery and decided i wanted to put the stoc recovery back.
I flashed it back and the recovery booted fine, wiped chache and did factory reset.
After i did that my phone got stuck on boot animation.
I then decided that it was a good idea to flash to complete stock rom back to my phone,
but chose the forma all + download option, so that the changes the custom recovery made
were deleted. Well, so i thought...
Right after the format i got an error that said that my firmware is not for my phone and failed.
Now if i try to format or download the stock rom (which i backed up from my device before flashing)
i get the error code in the title.
I tried uninstalling all the mtk drivers from my pc. When i connect my device it is picked up in device manager
as "unknown device", i then updated the drivers with mediatek preloader driver (and tried all the mtk drivers out there)
but the flash tool still gives the same error.
After i press the download button, and connect my phone, the bar at the bottom goes to 100%(red colour) then stays like that for 41 seconds.
Then it gives the error code and fails to flash.
I tried everything, from removing the battery, pressing vol+, vol-, power and all the combos in between, nothing.
If someone could help me unbrick my phone, i would be very greatfull.
P.S I have the stock rom backed up from my device .