I have an old Bluboo S3 phone with Android 8.1 (Mediatek processor).
Its main board corrupted so I ordered a refurbished one.
It had a bootloop issue so I tried to flash new stock rom to it.
I accidentally formatted the bootloader and now I'd have to unbrick it.
My Windows 10 computer recognizes it as Mediatek device but when I try to flash a stock bootloader to my phone, I'll get an error message ERROR STATUS_DA_HAS_MISMATCH 0xC0070004.
How do I get rid of that message and be able to flash a new bootloader to my phone?
Or should I just trash it?
Any help is highly appreciated!
P.S. I have a full TWRP back up from another similar phone. Can that be used to flash a new ROM to the phone (from the computer?)
Related
hi guys im having trouble with my alcatel 918 i did flash it through mediatek flash tool.. im about to downgrade it from 2.3.6. to 2.3.5 but things go wrong i accidentally format my nvram...i did tried to flash it again but i had this error no partitionon table available,, or sometimes failed to get dram...when i tried to go for one touch upgrade of alcatel (a support app) from alcatel it says my phone is already on its higher version...one thing more i cant even go to its recovery mode anymore...my phone is totally dead but still recognize by mediatek flash tool...any help is much appreciated...i just wanted to revive my phone...thanks guys..
If you lost the partition table, I think you need to format the flash first. Did you try the format button in the mediatek flash tool? Or is that how you lost the partition table in the first place?
Hello everyone,
I've honor 6 L12 rooted, unlocked bootloader as I can see in fast boot and multi tool, I've installed TWRP recovery.
I just made a backup through TWRP saved in internal SD storage, and try to install but since that try, I hade problem like model changed to L01 and my version is ending with B000
Also the shape and look (of firmware and theme), have been changed.
I don't know what happened and why!
I tried to to restore custom rom and recovery but couldn't.
Now I can't use recovery mod because it's giving me this: Error!
Function No : (Func_Boot_RECOVERY)
Error No : 2
I've tried to use multi tool giving me error with any writing to device:
Faild remote command not allowed
Note: I'm still able to access normal mod, but it's hard, I've to try ton of times pressing buttons to boot to normal mod.
Please any help dears.
Update:
Now my device is not booting to nermal mode anymore.
I kept flashing through unbrick tool in multitools.
But I don't know exactly which firmware and model to flush!
And now I'm stuck on recovery mode (also with same error above) and fastboot mode when I restart and connect device to pc keep pressing volume down.
Any single help!
ALHARTHI6 said:
Update:
Now my device is not booting to nermal mode anymore.
I kept flashing through unbrick tool in multitools.
But I don't know exactly which firmware and model to flush!
And now I'm stuck on recovery mode (also with same error above) and fastboot mode when I restart and connect device to pc keep pressing volume down.
Any single help!
Click to expand...
Click to collapse
Which firmware you were on before issue?
No I didn't
As I said trying to restore my backup through TWRP but was in internal SD., that's it.
My real model is L12.
Version, I don't remember but it was on android 5.1.1 EMUI 3.1
Now I just used Sd method and recover device with last 4.0.1 EMUI for devolvers, but no Arabic language.
How to go to another firmware?
What is the best, satable one for my device?
And is there a good custom stable rom, especially if android 7 ?
Please full answer if available
Thanks again
My TECNO Spark 2 KA7 is totally dead last tuesday when i tried to fix the sms not sented and deleted from the phone i uses other phone dumped firmware with build number 193 when it says brom error on sp flash tool i unlocked the bootloader via adb and flashed but it is the same and i tried to flash the whole ROM it with adb then i flased all the phones partition but system.img and userdata.img unable to flash but when i tried to reboot it is totally dead showing only the led lightened up when i pluged it to charge then i got it to carlcare but the sayed to me that the phones board is disqualified or not work more over.
Please help me! Does flashing the ROM via adb damaged the PCB Board of the phone or Norway
My TECNO Spark 2 KA7 is totally dead last tuesday when i tried to fix the sms not sented and deleted from the phone i uses other phone dumped firmware with build number 193 when it says brom error on sp flash tool i unlocked the bootloader via adb and flashed but it is the same and i tried to flash the whole ROM it with adb then i flased all the phones partition but system.img and userdata.img unable to flash but when i tried to reboot it is totally dead showing only the led lightened up when i pluged it to charge then i got it to carlcare but the sayed to me that the phones board is disqualified or not work more over.
Please help me! Does flashing the ROM via adb damaged the PCB Board of the phone or Norway
Hello, I have an X27 PLUS chinese phone with MT6572 processor and kitkat 442. I rooted him with Kingroot. Then I wanted to flash twrp. Аnd here I made a mistake. Since I didn't have a sd card, I decided to flash the TWRP directly on the phone with "Easy Magic TWRP" 2.8.1.0.
After the flash, it showed me that the installation was completed successfully. But the phone is already in boot loop. The only thing that works is Fast Boot. But I can't flash the stock image recovery file, it tells me that the flash sector can't be flashed (or doesn't support flash). I have a backup made with the help of Droid Tool and SP Flash Tool.The problem is that the flash tool cannot connect to the phone.
I have all the drivers installed, and before flashing the TWRP, the phone was recognized by the software.
Is there any way to solve this problem?
Ps:I am writing in the forum for the first time and I apologize if I am not in the right topic.
cybrax said:
Hello, I have an X27 PLUS chinese phone with MT6572 processor and kitkat 442. I rooted him with Kingroot. Then I wanted to flash twrp. Аnd here I made a mistake. Since I didn't have a sd card, I decided to flash the TWRP directly on the phone with "Easy Magic TWRP" 2.8.1.0.
After the flash, it showed me that the installation was completed successfully. But the phone is already in boot loop. The only thing that works is Fast Boot. But I can't flash the stock image recovery file, it tells me that the flash sector can't be flashed (or doesn't support flash). I have a backup made with the help of Droid Tool and SP Flash Tool.The problem is that the flash tool cannot connect to the phone.
I have all the drivers installed, and before flashing the TWRP, the phone was recognized by the software.
Is there any way to solve this problem?
Ps:I am writing in the forum for the first time and I apologize if I am not in the right topic.
Click to expand...
Click to collapse
Hey I got one of them x27 plus wish phone....mtk6572 4.4.2 kitkat .....for true info on device install "device info hw" green icon and activity launcher .....check out the info it gives compared to info from ph settings menu.....but my question did you find way to root of flash a generic android rom?
I used kingroot with laptop.