So i had my motorola for a year, the problem happened couple of time but not this worse. My phone(XT-720) now cannot turn on, if i power on the phone it has a black screen and the 4 button on the bottom light up. NOW sometimes the phone turn on and it get stuck on the boot up , when the logo show up the phone shut it self down. If i am lucky the phone starts up right, after about 30min it shut it self off. So then i go in the loop. I have only rooted the phone, and i have done nothing else. When i try to go to the boot menu, the phone says that the battery is too low to program anything , but my phone has about 90% of the battery. I love this phone it work fine but now it has this problem, Any tips or solution u guys can tell me?
Try factory setting or flash a fresh sbf using rsd lite.
.
napnau said:
Try factory setting or flash a fresh sbf using rsd lite.
Click to expand...
Click to collapse
I have tried the factory setting but i havent tried the flash a fresh sbf using rsd lite how do i do that ?
well..this is common problem with XT720, but so far I haven't seen that anyone did suggest some solution...
I have bricked two xt720 - and have tried EVERYTHING to revive them, but nothing worked
both time some problem was with dexter froyo
phone just did freezed, then restarted and after that I got bootloop
pajo985 said:
well..this is common problem with XT720, but so far I haven't seen that anyone did suggest some solution...
I have bricked two xt720 - and have tried EVERYTHING to revive them, but nothing worked
both time some problem was with dexter froyo
phone just did freezed, then restarted and after that I got bootloop
Click to expand...
Click to collapse
i wonder if anyhow we can skip that loop
well..try obvious things first..
google for RSD Lite (v4.8+) and download 2.1 SBF from this forum, and try to flash it...
if this don't help, I don't think that anything would
tn4 said:
So i had my motorola for a year, the problem happened couple of time but not this worse. My phone(XT-720) now cannot turn on, if i power on the phone it has a black screen and the 4 button on the bottom light up. NOW sometimes the phone turn on and it get stuck on the boot up , when the logo show up the phone shut it self down. If i am lucky the phone starts up right, after about 30min it shut it self off. So then i go in the loop. I have only rooted the phone, and i have done nothing else. When i try to go to the boot menu, the phone says that the battery is too low to program anything , but my phone has about 90% of the battery. I love this phone it work fine but now it has this problem, Any tips or solution u guys can tell me?
Click to expand...
Click to collapse
Download the following first:
1) RSD LITE 4.9
2) MotoHelper
3) Stock ROM of your choice from this thread
After you have downloaded the above, Install MotoHelper followed by RSD Lite. Remove the battery in the phone and re-insert. Press the Power Button+Volume Up Button+ Camera Button all at once. This should take you to Bootloader mode. Connect your phone to your system using a USB cable. Now run RSD Lite in the system. Browse and find the Stock ROM (.sbf) and load it using the RSD Lite. Start flashing. This should take you to back to the Stock settings. Remember this process could take a minimum of 15 mins, please be patient .If any doubts please revert back.
Related
itS MY BROTHERS fone and it wont turn on??? Is it complete gone or is there another way to bring it back to life. I bricked my htc nexus and ive been able to go around it. But im so lost when it comes to motorola. ? can anyone help please
Sir0 said:
itS MY BROTHERS fone and it wont turn on??? Is it complete gone or is there another way to bring it back to life.can anyone help please
Click to expand...
Click to collapse
You need to give us something to go off of. if you just say my car is broken will a mechanic know what to do?
Tell us what you or whoever has done to the phone to get it in that state then we can (hopefully) instruct you to fix it.
Is it a Droid 2 global or the original Droid 2.
My first thought is it's out of battery or you destroyed it with a liquid (Always take the battery out of your phone ASAP if you happen to get it wet).
Its a regualar droid 2. I rooted the phone months ago. and i guess he was playing around with and bricked it. I used another battery and it turn on and straight to the motorola sign. and stays there. took the battery off put it back on press X and turned it on. and i got into android ! mark. i hit search button and it takes me to the system recovery. Did the wipe date/factory reset. and wipe cache. All i get now is E: can't open /cache/ recovery/command. Im outta my league with motorola. how can i unbrick this from here
Best bet at this point would be to use RSDLite and flash the Full Stock SBF file.
Yes you need the 2.3.20 sbf and rsdlite to flash the software to the phone. Ignore that 'error' in the stock recovery it always says that.
Also if you have a D2 why did you post in the D2 G section?
Sent from my DROID2 using XDA App
I actually have the same problem, I used RSDLite to flash the full SBF, and my M2G won't power on. The process I have tired is a battery pull while charger is connected, then insert battery followed by holding power and x down.(nothing happened) I have not tried the method of using a different battery.
Any help is appreciated, I would like for the phone to power on. I don't want to use a warranty replacement just yet!
I used this SBF found here.
http://www.mydroidworld.com/forums/...l-sbf-file-2-4-29-full-rsdlite.html#post49668
Pressing the up-arrow when turning the phone on should take it straight to the bootloader, where you can then try flashing the SBF again.
helmutiffe said:
Pressing the up-arrow.....
Click to expand...
Click to collapse
Thank you, I tried that right when I went home with the same battery and nothin, then I tried the same process with a new battery and it worked.... Thank you for the response.
Peace Off & Blow Ganja!
I tried searching for the answer to my problem, But I couldn't find anyone with the same problem.
My DEFY is rooted Cyanogen 7 , I went into settings and did a factory reset
now all it will do is a constant loop, I already tried booting into recovery I wiped the cache and did a restore boot its still looping.
any ideas?
I have RSD installed but it doesn't detect the DEFY
Thanks
remove the battery, wait for 1 minute
insert the battery.
press power on + vol up for 6 sec....release it your phone will be in bootloader...now open rsd lite 4.9 it will detect your phone and FULL flash the stock sbf file for your region on 2.2.2
so for me I would need the Tmobile USA version?
Bargsbeer said:
so for me I would need the Tmobile USA version?
Click to expand...
Click to collapse
yes it will do....even other new versions on 2.2.2 like on french, DACH...etc will also work ....you just need to select your baseband frequency if you are on other regions sbf file..
How do I select the baseband frequency?
The problem I'm having now is I ran RSD with a SBF and now the phone is stuck on Bootloader it says "Cannot program" "Code corrupt" and even RSD is not recognizing it now, I'm worried I might have bricked it.
download latest RSD version.(i used 5.3.1)..boot into bootloader and flash it with a stock sbf(read comments before downloading)..everything should be fine..but still if u r stuck at M logo then remove the battery and reinsert it..everything should be fine..
having the same problem.. but it started when i turned on my 3g network.. now flashing back to a stable rom...
I got it working, I found out my battery was too low, So I had to do the mcgyver trick (which works) anyway after a hour of flashing, I got it back up and running.
Only issue now is I'm getting an error message telling me that the battery is invalid.
Bargsbeer said:
I got it working, I found out my battery was too low, So I had to do the mcgyver trick (which works) anyway after a hour of flashing, I got it back up and running.
Only issue now is I'm getting an error message telling me that the battery is invalid.
Click to expand...
Click to collapse
Possibly you might had damaged your battery while doing the Mcgyver trick. Since the voltage/current doesn't really regulated into a proper rating before injecting into the battery.
shibabz03 said:
having the same problem.. but it started when i turned on my 3g network.. now flashing back to a stable rom...
Click to expand...
Click to collapse
@shibabz03 I have that problem too. Have you solved the problem when you turn on 3G network?
thanks
Hi i have a question maybe someone can help?
I'm Having problems with my Xt720 stuck at M logo at boot up. I tried flashing it back to Stock CBW rom following reverendkjr's instructions to the T. after i allow Rsd to go through the Processes, and it says its rebooting phone i give it time to adjust, but still stays on M logo. Rsd is telling me to Please manually power up this phone. I don't know what else to try? I cant do a hard reset either.. Can someone help Please
Have you tried to take out your SD card and reboot the phone again?
I was hit with same issue last time due to a bad SD card.
Alternatively you can try to reflash without a SD card.
yes, i've tried both ways, but no luck either way?
What did you do to get booyloop
Sent from my Milestone using XDA Premium App
mchlbenner said:
What did you do to get booyloop
Sent from my Milestone using XDA Premium App
Click to expand...
Click to collapse
natifan81 said:
Hi i have a question maybe someone can help?
I'm Having problems with my Xt720 stuck at M logo at boot up. I tried flashing it back to Stock CBW rom following reverendkjr's instructions to the T. after i allow Rsd to go through the Processes, and it says its rebooting phone i give it time to adjust, but still stays on M logo. Rsd is telling me to Please manually power up this phone. I don't know what else to try? I cant do a hard reset either.. Can someone help Please
Click to expand...
Click to collapse
..........
what i did to get the bootloop was i took a picture friday night, and it froze up, so i pulled the battery to reboot and its been on M logo since then. when plugged into wall charger it wont charge either
I haye to say this but your phone is bri cked dam can you get into bootloader.
Sent from my Milestone using XDA Premium App
Yes i can get it to bootloader mode, and i've tried to flash it back to stock Cincinnati Bell Rom, but when it completes the tasks it reboots phone and is still getting stuck on M logo Screen??
natifan81 said:
what i did to get the bootloop was i took a picture friday night, and it froze up, so i pulled the battery to reboot and its been on M logo since then. when plugged into wall charger it wont charge either
Click to expand...
Click to collapse
exactly the same thing happened to me...
I flashed froyo, was playing a few hours, and after firing flash phone was frozen and then I got bootloop
I was flashing phone with many different sbf's and nothing helped except official moto service center...
Use RSD lite above 4.9 Version, Download a sbf file for xt-720,go to boot loader and run the sbf file from Rsd lite. Your phone should start working.
if you are able to reach openrecovery, or some other way to access the phone internals,You may turn adb debugging during boot.
So if you have somewhat access to the phone to turn on ad debuging you have to
kill the usbd process ( pkill usbd if busybox is new enough)
then
Code:
echo "msc_adb" > /dev/usb_device_mode
You have to "integrate" that in your startup scripts.
Then issue "adb logcat" . The adb will wait for the phone and will start logging as soon as possible . When that happens, we will be able to adb shell to the phone, even if the display show just some static logo...
If you are not able to access the phone internals, other possibility exists, but requires to be able to fastboot the phone. Then custom initramfs can be prepared, which will include the above early adb enabling .
enabling adb taked from here:
http://code.google.com/p/cyanogenmo...e=update-adb_during_boot_enabler.zip&can=2&q=
have in mind of this issues (not a big deal, at least for me)
http://code.google.com/p/cyanogenmo...atus Priority Version Summary Stars&start=100
Maybe i'm posting in the wrong section but here's the thing.
Okay so I tried searching everywhere for a solution and I didn't find anything.
So this is what happened, I was on ICS leak 4.0.4 ICS.672.1.13.en.03 then I tried to Fxz to AT&T 2.3.5 InlineFlashing_edison_5.5.175.16_cfc_p3_APBP_CID28 5.zip and it got stuck at 5/20 saying "Rebooting bootloader" the screen stayed black for a long time, so I clicked close and this is where all this happened. My phone doesn't turn on, not even Fastboot, when I plug it into the charger it doesn't do anything, but when I plug it into my laptop without battery the white led turns on but still it doesn't do anything, the laptop doesn't detect anything and when I press the buttons it doesn't react nor do anything. I don't know anymore what to do, I bought this overseas so I have no warranty and it's not an AT&T phone. If anyone went through this, I really don't know what to do.. I know it's not softbrick as I can see it. I'll be very thankful if there is a solution, but my hopes are really down..
I know I read all the guides, it said "Don't pull battery or unplug. So I didn't unplug or remove battery, I just clicked close. I really didn't know this could happend. Didn't see it in any thread or post that you can't Fxz from 4.0.4 to AT&T 2.3.5
darkmixta said:
. My phone doesn't turn on, not even Fastboot, when I plug it into the charger it doesn't do anything, but when I plug it into my laptop without battery the white led turns on but still it doesn't do anything, the laptop doesn't detect anything and when I press the buttons it doesn't react nor do anything.
Click to expand...
Click to collapse
what phone model /where did you get that zipped rom from/ do you have a stock rom ?
If you start phone and screen is black ( no bootloader image) then it's possible to be really bricked
ruscan.calin said:
what phone model /where did you get that zipped rom from/ do you have a stock rom ?
If you start phone and screen is black ( no bootloader image) then it's possible to be really bricked
Click to expand...
Click to collapse
I got an Atrix 2 and I was on ICS leak 4.0.4, I tried to Fxz to this InlineFlashing_edison_5.5.175.16_cfc_p3_APBP_CID285.zip which I found at this site http://sbf.droid-developers.org/edison/list.php. I have locked bootloader. Btw it got stuck at 5/21 "rebooting bootloader" with a black screen after that nothing worked for me, before I tried it I had 90% of battery.
darkmixta said:
I got an Atrix 2 and I was on ICS leak 4.0.4, I tried to Fxz to this InlineFlashing_edison_5.5.175.16_cfc_p3_APBP_CID285.zip which I found at this site http://sbf.droid-developers.org/edison/list.php. I have locked bootloader. Btw it got stuck at 5/20 "rebooting bootloader".
Click to expand...
Click to collapse
never flash a rom without instructions if you are not an experienced user you have to use RSD Lite to get back to working conditions
ruscan.calin said:
never flash a rom without instructions if you are not an experienced user you have to use RSD Lite to get back to working conditions
Click to expand...
Click to collapse
But I was told that if you have a locked bootloader it's really hard to hard brick your phone.
darkmixta said:
But I was told that if you have a locked bootloader it's really hard to hard brick your phone.
Click to expand...
Click to collapse
pull out battery then back and try to boot/recovery/fastboot or flash a rom by RSD Lite
also read here
ruscan.calin said:
pull out battery then back and try to boot/recovery/fastboot or flash a rom by RSD Lite
also read here
Click to expand...
Click to collapse
I tried booting into fastboot, but the phone even turn on. Only white led when I plug it without battery into my laptop. So it isnt really dead but something is wrong, I tried the invisible boot, but I guess it isnt working.
I was trying to root my Galaxy Tab 2 for the first time. The process started, but failed. Now I'm stuck on the "firmware upgrade encountered an issue" screen. The device will turn off and back on, but remains on error screen. Seems to be trapped in download mode (as I can still see the download progress bar). Go Mobile and Odin say the device has connected to PC.
Anyone know of anything to fix this? Should I just revert to stock ROM and try again later?
davick said:
I was trying to root my Galaxy Tab 2 for the first time. The process started, but failed. Now I'm stuck on the "firmware upgrade encountered an issue" screen. The device will turn off and back on, but remains on error screen. Seems to be trapped in download mode (as I can still see the download progress bar). Go Mobile and Odin say the device has connected to PC.
Anyone know of anything to fix this? Should I just revert to stock ROM and try again later?
Click to expand...
Click to collapse
can you actually boot in to download mode? power and vol down after power off? I know you say it seems to trapped in download mode but they're different! If you can, flash a stock rom from sammobile.com
squ89r97 said:
can you actually boot in to download mode? power and vol down after power off? I know you say it seems to trapped in download mode but they're different! If you can, flash a stock rom from sammobile.com
Click to expand...
Click to collapse
I cannot boot into download mode. When I turn it off, it simply flashes off for a few secs then goes back to the error screen on its own. Does the same thing when I turn it back on myself. No logo screen. No droid. Nothing.
EDIT: Unplugged device entirely and retried the stock ROM in Odin. Finally worked! Looks like it might be fixed now.
davick said:
I cannot boot into download mode. When I turn it off, it simply flashes off for a few secs then goes back to the error screen on its own. Does the same thing when I turn it back on myself. No logo screen. No droid. Nothing.
EDIT: Unplugged device entirely and retried the stock ROM in Odin. Finally worked! Looks like it might be fixed now.
Click to expand...
Click to collapse
Phew, glad to hear it. I've been there myself with the P3110 - take a step back, breath and relax. compose and BOOM! make backups! and backup some more!
squ89r97 said:
Phew, glad to hear it. I've been there myself with the P3110 - take a step back, breath and relax. compose and BOOM! make backups! and backup some more!
Click to expand...
Click to collapse
One can never have too many backups. I back-up EVERYTHING, even software and drivers I know will become outdated eventually.
Thanks for the help. I also pressed the button. Plz don't thanksrage on me! *cowers*
davick said:
One can never have too many backups. I back-up EVERYTHING, even software and drivers I know will become outdated eventually.
Thanks for the help. I also pressed the button. Plz don't Thank Rage on me. *cowers*
Click to expand...
Click to collapse
Better to have them and not need them, than not have them and need them - Thanks for thanking *Shakes fist and shouts "I'll let you off this once"*
davick said:
I cannot boot into download mode. When I turn it off, it simply flashes off for a few secs then goes back to the error screen on its own. Does the same thing when I turn it back on myself. No logo screen. No droid. Nothing.
EDIT: Unplugged device entirely and retried the stock ROM in Odin. Finally worked! Looks like it might be fixed now.
Click to expand...
Click to collapse
It was already in download mode.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
I think my cord might have an issue (or they're just testy in general). I was noticing the battery wasn't fully charging for a while before all this. After the whole brick issue, I plugged it in to charge and it started flashing the "loading charge (empty battery + loading circle)" screen on and off until I unplugged and re-plugged it. I suspect that this is why the rooting failed in the first place.
Hi you may use cf auto root for gt p5113 with odin.this happend to me couple days ago.
Sent from my SAMSUNG-SGH-I747 using xda premium
I also bricked my tablet. Searched wide and low for ideas on how to fix. But I can't find a thing. I cannot get into Odin mode or recovery. Just hangs on the battery charging screen. My windows 7 computer can't even recognize it in Kies or odin. Yes the tablet is rooted.