Related
ok droid charge was rooted went to restore back to stock unrooted (was going to sell it) tried to flash using Odin with the pit file and stock one Odin went about half way and had a error phone turned off i tried to get the phone back into download mode to restart the process but i can't get the phone into download mode also i can't get the phone to boot up no Samsung logo nothing any help would be greatly appreciated the phone will not do anything at all i need help i have tried p3 Samsung pst method but still nothing
thanks
dustin4863 said:
ok droid charge was rooted went to restore back to stock unrooted (was going to sell it) tried to flash using Odin with the pit file and stock one Odin went about half way and had a error phone turned off i tried to get the phone back into download mode to restart the process but i can't get the phone into download mode also i can't get the phone to boot up no Samsung logo nothing any help would be greatly appreciated the phone will not do anything at all i need help i have tried p3 Samsung pst method but still nothing
thanks
Click to expand...
Click to collapse
just curious what methode are you using to enter download mode? Did you try recovery for giggles?
i have tried both download mode and recovery and just trying to let it boot up normal and it will not do anything in all three just a black dead screen
Try leaving the battery in when you go to download mode. Also leave it in when flashing.
if it wont even power on in any way or go into the download mode you might be bricked...I did this before and I had to exchange it at Verizon..luckily since it wouldnt turn on they couldnt tell what I did to it...hope you can get your issue resolved
Ha a true brick. Finally someone using the terminology correctly. A buddy of mine has this happen with his galaxy s. He got it exchanged in store no questions asked. btw Sorry to hear about your phone
Sent from my ADR6350 using XDA App
1/2 Brick
Hi
Sorry to hear about your issue. I am at half brick now. Been at multiple spots learning here but never completely no visability! 3/4, 7/8, right now in a flash it does not see my phone (no network) data side is fine but can not get or receive calls. It is not the SIM card (according to VZW). Data side works fine 4G etc, emails but no phone. A great PDA but not a phone. No one has answers but I belive to be a cp_modem.bin issue download hangs at around 98% in what does a boot 2nd boot on the screen in the download then says:
Wait, VIA Booting ..
VIA rest done. ..
Downloading to VIA...
To everyone the {Kangfuscius.tar} has helped me when I thought all hope was lost, even in a partial download it helped to bring me back.
Any suggestions on files for the phone tab in ODIN all I can think of is, it can't get worse. The FEDEX guy kow knows me by name between the Fascinate's and now I guess the Charge.
Any help appreciated,
norm883
norm883 said:
Hi
Sorry to hear about your issue. I am at half brick now. Been at multiple spots learning here but never completely no visability! 3/4, 7/8, right now in a flash it does not see my phone (no network) data side is fine but can not get or receive calls. It is not the SIM card (according to VZW). Data side works fine 4G etc, emails but no phone. A great PDA but not a phone. No one has answers but I belive to be a cp_modem.bin issue download hangs at around 98% in what does a boot 2nd boot on the screen in the download then says:
Wait, VIA Booting ..
VIA rest done. ..
Downloading to VIA...
To everyone the {Kangfuscius.tar} has helped me when I thought all hope was lost, even in a partial download it helped to bring me back.
Any suggestions on files for the phone tab in ODIN all I can think of is, it can't get worse. The FEDEX guy kow knows me by name between the Fascinate's and now I guess the Charge.
Any help appreciated,
norm883
Click to expand...
Click to collapse
I don't know why your phone is booting into 'VIA' mode and don't even know what that is so I couldn't say a fix other than odining the usual stock rom/pit combo (leaving the battery in when flashing in odin also and uncheck the 'auto reboot' option)... also phone tab/button is NOT supposed to be touched in odin, only PDA, PIT if needed, and Start
Where did it fail in the Odin flash? The only way you should be bricked is if it failed while flashing boot.bin or sbl.bin, otherwise, it should still go to download mode. Have you tried using one of the Force Download Mode jigs/dongles that the GSM models use to get into download mode?
i don't recall where it failed at but it will not not respond to anything with batt or without where can i find the gsm software i will give it a try before i call insurance a link or anything would be great
what gsm models are equivalent to the charge
dustin4863 said:
i don't recall where it failed at but it will not not respond to anything with batt or without where can i find the gsm software i will give it a try before i call insurance a link or anything would be great
what gsm models are equivalent to the charge
Click to expand...
Click to collapse
Infuse 4g or SGS 2 unlocked.
Sleek69 said:
Infuse 4g or SGS 2 unlocked.
Click to expand...
Click to collapse
SGS2 is not equivalent. Just search for galaxy s download jig and i'm sure you'll find what I'm talking about. It is the same thing for all the SGS phones, and some have said it works on the 4G versions of the phones as well.
dustin4863 said:
ok droid charge was rooted went to restore back to stock unrooted (was going to sell it) tried to flash using Odin with the pit file and stock one Odin went about half way and had a error phone turned off i tried to get the phone back into download mode to restart the process but i can't get the phone into download mode also i can't get the phone to boot up no Samsung logo nothing any help would be greatly appreciated the phone will not do anything at all i need help i have tried p3 Samsung pst method but still nothing
thanks
Click to expand...
Click to collapse
Hi, I had the same thing happen to my first Charge. I could not boot my phone even to the samsung logo, so I searched around the Internet. Somehow I think it was the Captivate trick worked. I took out sim, battery, sdcard>plugged in usb to computer>held up and down volume together>put in battery; miraculously it went to download. I tried every other combination beforehand and none worked, so I know this method works.
Unfortunately this was before we had IMNUTS Pit file and a odin flash would not change anything so I could not recover and I flashed a Pit that was not for the Charge. Wrong answer! After that it was in the non-boot state again but the same method above would not work any longer. If your phone does not work with the method above, maybe something went wrong with the repartition and pit file. That is just a guess though!
well the jig hasn't worked yet i am running right at 300k tomorrow i am going to get a 1k and add that in also and see if that helps. also pulling all the cards and the battery didn't work either. this is not looking good i am up for any ideas that anyone has
thanks
dustin
Hey guys found a way to unbrick Samsung droid charge and revert back to stock.
1. Download and install Odin found here ( http://forum.xda-developers.com/show....php?t=1085190 ) unzip and open
2.Download this file and unzip ( CI510_VZW_EE4_ALL_ONE-LTE-CP_REV03_user_CL1014954.tar.md5.7z) from here ( http://www.multiupload.com/6WJ2SFUKO6 ) or original thread where i found this file is from here ( http://androidflip.com/android-2-3-4...talling-guide/ )
3. set phone to download mode, do this by taking battery of phone, plug phone into computer and hold Volume down, a Yellow triangle with a working android will appear.
4. Click on odin you will see your phone come up under ID:COM, now do not click on anywhere but on PDA thats where you will have to find the file you downloaded on step 2 and make sure is the unzipped file. once u find it, click on open then start.
5. Be patient this can take up some time, once is done the box will turn green and say pass, at this time your phone will no longer have the Yellow triangle and you can unplug and place the battery back in and turn phone on.. once again be patient when turning phone on it will take a little while to complete.
i tried this and it does work, my Droid charge was bricked and now it works.
Thanks to xda-developers where i was able to find odin and also thanks to androidflip.com where i was able to find the Droid Charge stock rom to flash it back using odin.
Hope this helped everyone needing help.
dustin4863 said:
well the jig hasn't worked yet i am running right at 300k tomorrow i am going to get a 1k and add that in also and see if that helps. also pulling all the cards and the battery didn't work either. this is not looking good i am up for any ideas that anyone has
thanks
dustin
Click to expand...
Click to collapse
Dustin, were you able to get it working? I'm in the same boat. Right after boot.bin it failed. Which was within seconds after hitting the start button in Odin. Verizon won't honor my warranty, because I didn't buy the phone from them.
Hard Brick Fixed
If you are truly hard bricked (no download mode, no power, no nothing), you can get it fixed for $40 at mobiletechvideos.com. I flashed a file that didn't work unless I took off the md5 extension. Big mistake. After trying absolutely everything, including surfing the internet for a day, spending almost $20 to get 2 day delivery for a USB Jig that did absolutely nothing, I sent my phone to mobiletechvideos.com. Josh brought it back from the dead; don't know how, but it was the best $40 I ever spent! I think there aren't any reviews because there haven't been enough newbies like me who just can't wait for Gingerbread and bricked their Samsung Charge. Putting my review there tonight...should be first one. The reviews from all the other phones he has unbricked convinced me to try and I'm glad I did.
Many people have hard bricked their phones trying to downgrade. Give the jig a shot, but don't hold out much hope.
Personally I think there is something being overlooked during the downgrade process... Too many people are hard-bricking during the process for it to be coincidence.
Oh yes
mgsparro said:
If you are truly hard bricked (no download mode, no power, no nothing), you can get it fixed for $40 at mobiletechvideos.com. I flashed a file that didn't work unless I took off the md5 extension. Big mistake. After trying absolutely everything, including surfing the internet for a day, spending almost $20 to get 2 day delivery for a USB Jig that did absolutely nothing, I sent my phone to mobiletechvideos.com. Josh brought it back from the dead; don't know how, but it was the best $40 I ever spent! I think there aren't any reviews because there haven't been enough newbies like me who just can't wait for Gingerbread and bricked their Samsung Charge. Putting my review there tonight...should be first one. The reviews from all the other phones he has unbricked convinced me to try and I'm glad I did.
Click to expand...
Click to collapse
Doing so NOW! For the same issue. My PC decided to spontaneously reboot during ODIN while flashing a ROM on My Droid Charge. Josh was quick to respond to EVERY single annoying question I had about their service. So I am doing so. If it works, I'll tell you, I'm adding a link to their site in my signature on every forum I'm a member of, even forums I have for my daughter's schooling hahaha! They deserve the references just for being quick to respond. Thanks for the info man, props to you.
I know this title comes up a lot but I can't seem to find my problem.
I wanted to go back to the stock rom and I used the proper RUU but totally forgot to use the S-ON tool before hand. It installed successfully but now I get a solid amber light and so far I got my inspire to boot once only to get stuck on the splash screen with it vibrating non-stop.
And now it just vibrated once, went to a black screen and then shut off. I really don't know what to do since I can't even get to HBOOT nor will the computer recognize it.
I've done numerous batter/sim card pulls as well as clean them out.
Any help would be greatly appreciated
Have you tried booting into the bootloader and doing a factory reset?
Sent from my Inspire 4G using XDA
I think he was referring to the bootloader as HBOOT. I had this problem while rooting my sisters Inspire. Might be a corrupted bootloader.
Sent from my Inspire 4G using xda premium
lay012 said:
I think he was referring to the bootloader as HBOOT. I had this problem while rooting my sisters Inspire. Might be a corrupted bootloader.
Sent from my Inspire 4G using xda premium
Click to expand...
Click to collapse
Last I remember my bootloader was TWRP which I guess I had accidentally installed somehow. If you think its a corrupted bootloader how would I go about solving this, if there is a solution?
moutansos said:
Have you tried booting into the bootloader and doing a factory reset?
Sent from my Inspire 4G using XDA
Click to expand...
Click to collapse
Never do a factory reset on a S-OFF device....it will jam u up.
greggyt79 said:
Last I remember my bootloader was TWRP which I guess I had accidentally installed somehow. If you think its a corrupted bootloader how would I go about solving this, if there is a solution?
Click to expand...
Click to collapse
It seems that the RUU you flashed was a Froyo one and your phone was running GB so you messed the bootloader. Hit the Hack Kit IRC channel (is in the OP thread) and we will lend u a hand to fix that....
Alright so I went to the IRC and they told me they couldn't help because it did not deal with the hack kit, fair enough.
I have been able to get the phone to boot after waiting for about 10 minutes but I cannot get to the bootloader. I tried rooting the phone again this way I can turn s-on then flash the stock rom again but the phone ends up not being detected half way through the process.
I really don't know what else to do...
Forgot to mention, now my inspire boots but then fades to a greyed out screen. My computer recognizes the phone as something occupying the usb port but is not accessible. Wish the phone had a physical reset button somewhere that i can poke with a paperclip...
Sent from my SAMSUNG-SGH-I897 using XDA
greggyt79 said:
Alright so I went to the IRC and they told me they couldn't help because it did not deal with the hack kit, fair enough.
I have been able to get the phone to boot after waiting for about 10 minutes but I cannot get to the bootloader. I tried rooting the phone again this way I can turn s-on then flash the stock rom again but the phone ends up not being detected half way through the process.
I really don't know what else to do...
Forgot to mention, now my inspire boots but then fades to a greyed out screen. My computer recognizes the phone as something occupying the usb port but is not accessible. Wish the phone had a physical reset button somewhere that i can poke with a paperclip...
Sent from my SAMSUNG-SGH-I897 using XDA
Click to expand...
Click to collapse
Greggyt, Hit the IRC Channel again,.....it was a rough day and we were a bit pissed. I just connected after you were gone....=0) just hit the channel again....
glevitan said:
Greggyt, Hit the IRC Channel again,.....it was a rough day and we were a bit pissed. I just connected after you were gone....=0) just hit the channel again....
Click to expand...
Click to collapse
I will get back on the IRC this evening when I get home from work thanks again!!!
Does it say anything about QHUSB_DLOAD USB device being connected?
I ran into a similar problem not too long ago, immediate vibrating followed by a solid amber light and no phone activity (nothing on the screen at all). I knew I had a backup in Recovery, but I couldn't even get into recovery.
In order to work around this, I did the following steps.
1. Deleted the PD98IMG file from my SD card (so I could get to recovery once I made it to the bootloader).
2. Take out the battery, then put it back in.
3. Plug in the phone, and let it sit for a few minutes.
4. Start into bootloader (hold power + Volume Down)
Now, in my case I was just trying to get back into recovery. if you don't have a working recovery, or no ROM to flash, you'll want to grab a few RUU 's to try from the bootloader. Try stock GB first, then try a stock Froyo just for the heck of it.
Hope this helps! Good luck to anyone else that's stumbled into this problem.
side note: I've also heard of this "power problem" occurring to other people without bootloops or screwed up bootloaders: which is solved by doing steps 2 and 3, then it'll boot up normally.
help
im having same issue i have gb stock and i accidtly did froyo ruu phones power bottun does nothing i have to plug it into computer and it will get solid amber light then eventually it either brings up battery charge icon and then if i press power button or unplug it. it just shuts off the i plug it back in and wait sometimes white htc screen comes up and it vibrates for a while then boots ad works like nothing is wrong but i cant flash gb ruu when i try to do that or re root and go to recovery to reistall ics that is on my sd as soon as phone restarts during process it doesnt reboot then i have to go threw whole procss of trying to get it to boot back up
glevitan said:
Never do a factory reset on a S-OFF device....it will jam u up.
It seems that the RUU you flashed was a Froyo one and your phone was running GB so you messed the bootloader. Hit the Hack Kit IRC channel (is in the OP thread) and we will lend u a hand to fix that....
Click to expand...
Click to collapse
im new to this site but i did exactly what you said in your post and now my inspire wont reboot unless i go threw a few hour process of plugin my phone in and i get solid amber light for like 5 min then a battery charge screen comes up then i have to unplug my phone and plug it back in the last time i did this it took about 8 hours of tryin until it finally got amber light for like 5 min then started vibrating for a min or 2 then it booted up and its bin workin fine for like a week now ive tried to reflash gingerbread ruu ive tried doin upgrade from my phone and tried reroot but as soon as it shuts down to start upgrade my phone is off and wont reboot
my atrix 2 don't know dead or what?
it did't on while pressing the power button and the screen black or nothing appear while i plug in the charger.
Help!!!!!!
say someting in detail please~
say someting in detail please~
My atrix 2 ME865 was running ICS4.0.4 MERetail.I wanna flash it back to 2.3.6,so i download the (InlineFlashing_edison_5.5.175.16_cfc_p3_APBP_CID285.zip) from the droid-developers.
My phone battery is 40% while flashing using RSDlite 5.6.
Everything ok but at the process 5/21 it say "FAIL"
then the phone just black screen.
atrix2 said:
my atrix 2 don't know dead or what?
it did't on while pressing the power button and the screen black or nothing appear while i plug in the charger.
Help!!!!!!
Click to expand...
Click to collapse
Have you tried holding down BOTH volume buttons while powering on the device to boot into AP Fastboot, and try to flash the FXZ that way?
I try that but nothing happen.
atrix2 said:
My atrix 2 ME865 was running ICS4.0.4 MERetail.I wanna flash it back to 2.3.6,so i download the (InlineFlashing_edison_5.5.175.16_cfc_p3_APBP_CID285.zip) from the droid-developers.
My phone battery is 40% while flashing using RSDlite 5.6.
Everything ok but at the process 5/21 it say "FAIL"
then the phone just black screen.
Click to expand...
Click to collapse
Meretail flashing with at&t rom?
It does not seem like a good idea.
You can downgrade it to http://sbf.droid-developers.org/edison/5.5.1-EDEM-27-MEARET_cfc.xml.zip with RSd Lite (Made it with RSD Lite 4.7 successfully).
atrix2 said:
I try that but nothing happen.
Click to expand...
Click to collapse
So, can you even boot into AP Fastboot, or is your device not powering on at all...?
Solution
seems like ur rom chip in the motherboard has gone bad. same happened to me when trying to flash custom rom to AT&T atrix 2. Went to Motorola service center costed me $160 to get a new motherboard ...but it got fixed and worth the effort....worth a try...
So i was flash the wrong rom.
But i can't flash again because i cannot enter the AP Fastboot,both vol button n power on do nothing.
atrix2 said:
So i was flash the wrong rom.
But i can't flash again because i cannot enter the AP Fastboot,both vol button n power on do nothing.
Click to expand...
Click to collapse
Maybe your battery is empty. Never start to flash without full battery (and not correct rom of course).
If you're feeling brave, try THIS...
Thanks for the feedback.
So i can still hold both vol button + power up to enter the bootloader if i flash fail?
I remember it stuck at 5/21 in RSDlite.
atrix2 said:
Thanks for the feedback.
So i can still hold both vol button + power up to enter the bootloader if i flash fail?
I remember it stuck at 5/21 in RSDlite.
Click to expand...
Click to collapse
No, the bootloader is locked on the MB865. You mentioned before that trying to boot into AP Fastboot isn't responsive either, right? If you are able to do anything, you need to flash 5.5.1-EDEM-27-MEARET_cfc.xml.zip as xanadu suggested.
Always a good idea to make a CWM backup before flashing any new roms, just in case...
LOCKED??
I think my battery is empty so it black screen when i press the button.
And i got many cwm backup which i backup before my phone cannot boot.
How to restore the cwm backup if my phone can't boot?
atrix2 said:
LOCKED??
I think my battery is empty so it black screen when i press the button.
And i got many cwm backup which i backup before my phone cannot boot.
How to restore the cwm backup if my phone can't boot?
Click to expand...
Click to collapse
If you're completely dead in the water, you'll have to find a way to get charge to the battery. You might try The McGuyver Method to get a charge to battery, but be very wary in doing this -you could fry your phone and/or explode your battery. If you're not comfortable doing this (and I don't recommend this if you are not savvy with electrical stuff and 'open phone surgery' you should first try and get your hands on a new OEM battery!
Apex_Strider said:
If you're completely dead in the water, you'll have to find a way to get charge to the battery. You might try The McGuyver Method to get a charge to battery, but be very wary in doing this -you could fry your phone and/or explode your battery. If you're not comfortable doing this (and I don't recommend this if you are not savvy with electrical stuff and 'open phone surgery' you should first try and get your hands on a new OEM battery!
Click to expand...
Click to collapse
i tried that method on my defy 3 times .....never had issue.....but still it was quite scary for me every time.....but in the end it worked......risk is needed to be taken ......
Thanks but that way is too dangerous.I was afraid so i will send it to the Motoservice because i got no ideo for the empty battery on a dead phone.
atrix2 said:
Thanks but that way is too dangerous.I was afraid so i will send it to the Motoservice because i got no ideo for the empty battery on a dead phone.
Click to expand...
Click to collapse
Before you ship your device off to the netherworld of Motorubbish, try getting a new battery. It may be a faster fix and you won't have to deal with wait tine from Moto. Plus, if you've rooted and Moto is able to determine that you'll have no warranty.
Sent from my MB865 using xda premium
Apex_Strider said:
Before you ship your device off to the netherworld of Motorubbish, try getting a new battery. It may be a faster fix and you won't have to deal with wait tine from Moto. Plus, if you've rooted and Moto is able to determine that you'll have no warranty.
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
Also if you are debating getting a new battery, try to get an external charger, it costs a lot less and you will be able to recover from this a whole lot easier if you have the external charger, otherwise McGyver is the only way out for you...
I would NOT take this into Motorola, especially since you failed a flash, they can see that, the first time they get it to turn on it will go to the recovery screen and say failed flash.... They may NOT give you any support.
I would try the external battery charger.
Here are a couple examples of Atrix2 external battery chargers:
http://www.wirelessemporium.com/p-1...pare-battery-charger-w-usb-port-mid-size-.asp
http://www.wirelessemporium.com/p-102964-universal-spare-battery-charger-w-usb-port.asp
jimbridgman said:
Also if you are debating getting a new battery, try to get an external charger, it costs a lot less and you will be able to recover from this a whole lot easier if you have the external charger, otherwise McGyver is the only way out for you...
I would NOT take this into Motorola, especially since you failed a flash, they can see that, the first time they get it to turn on it will go to the recovery screen and say failed flash.... They may NOT give you any support.
I would try the external battery charger.
Here are a couple examples of Atrix2 external battery chargers:
http://www.wirelessemporium.com/p-1...pare-battery-charger-w-usb-port-mid-size-.asp
http://www.wirelessemporium.com/p-102964-univertssal-spare-battery-charger-w-usb-port.asp
Click to expand...
Click to collapse
thats your best bet unless you know someone with the same phone. I have a family member with the same one, so when I killed my battery during a flash I just stole that one for 5 minutes.
I flashed a Jellybean touchwiz rom for Verizon GS3, and went to reboot and now nothing, zero zip nada. No charging led light, no way to get into recovery and no response.
Anything I can do?
what happens when you do vol up + home+power button?
Absolutely nothing. I tried to get back into the recovery to see if I could restore my backup and nope.
did you try leave it pluged in for 30mins ?
does it vibrate once when you try to turn it on?
No vibrating and no sign of life at all. Even when plugged into my computer, I was going to try the unbrick guide but it listed that I should be able to get into the recovery still.
NickTheMajin said:
No vibrating and no sign of life at all. Even when plugged into my computer, I was going to try the unbrick guide but it listed that I should be able to get into the recovery still.
Click to expand...
Click to collapse
leave it plugged in for a while to make sure its not drained battery
do you have a usb jig?
I don't have a USB jig but this is possibly good news. I removed the battery and SD card and plugged it into my computer and it tried to install drivers (failed but tried) and the led light comes on red.
if your gettin led now you more then likely need to let it charge
It doesn't give me the led with the battery in
Plug it into a wall charger for at least 30 or even better if you can get a battery from someone.
Sent from my sexy white Eclipsed galaxy S3
I think its gone still nothing.
red led means qualcomm download mode. sounds dead to me
Yeah, haha. I saw it and mentally prepared myself for it. Literally just got the phone today so Verizon had no qualms with just sending me a new phone. Guess I'm reactivating my Rezound in the meantime. Thanks for the help guys.
you know
I am surprised. That also happened to me the first time i flashed that very same rom (touchwiz) with twrp . I have done this so many times , i literarily can flash a rom on the way to work .
I was in shock , i still dont know how the heck can i flash a rom and brick .
I plugged mine into windows and i got the device manager driver error from hell . and my phone never came back up again
I stayed away form twrp and touchwiz and i still cant possibly comprehend how a simple rom flash can brick my phone .
Which ROM did you flash?
Sent from my SCH-I535 using xda premium
you could probably send it to get Jtag'ed for around $60 if your warranty is invalid (ie used device)
You just hard bricked it. I did the same thing. Check here - post 5 shows the same symptoms :http://forum.xda-developers.com/showthread.php?t=1770341
And here: http://forum.xda-developers.com/showthread.php?t=1791721
I was pushing a copy of root66 that I hadn't md5'd. Took a JTAG to bring me back (twice) .
Sent from my SCH-I535 using xda app-developers app
So, in the future, md5 checksum absolutely everything since I'm assuming now that that is why this happened? (Since I made doubly sure I was flashing a rom for my phone).
If you still have the file you downloaded, you can check it. That would answer that question. If it checks out fine, then we have to look elsewhere for the problem.
BTW, MobileTechVideos.com can bring you back - based on my experience with them, I highly recommend.
Sent from my SCH-I535 using xda app-developers app
Please share exactly what you did so others can benefit from your unfortunate experience.
What ROM did you flash?
Did you use ODIN or a recovery?
If recovery, which one - CWM or TWRP?
Was there any unusual condition you can think of ... low battery, USB connected to computer or to charger, etc?
So i had my motorola for a year, the problem happened couple of time but not this worse. My phone(XT-720) now cannot turn on, if i power on the phone it has a black screen and the 4 button on the bottom light up. NOW sometimes the phone turn on and it get stuck on the boot up , when the logo show up the phone shut it self down. If i am lucky the phone starts up right, after about 30min it shut it self off. So then i go in the loop. I have only rooted the phone, and i have done nothing else. When i try to go to the boot menu, the phone says that the battery is too low to program anything , but my phone has about 90% of the battery. I love this phone it work fine but now it has this problem, Any tips or solution u guys can tell me?
Try factory setting or flash a fresh sbf using rsd lite.
.
napnau said:
Try factory setting or flash a fresh sbf using rsd lite.
Click to expand...
Click to collapse
I have tried the factory setting but i havent tried the flash a fresh sbf using rsd lite how do i do that ?
well..this is common problem with XT720, but so far I haven't seen that anyone did suggest some solution...
I have bricked two xt720 - and have tried EVERYTHING to revive them, but nothing worked
both time some problem was with dexter froyo
phone just did freezed, then restarted and after that I got bootloop
pajo985 said:
well..this is common problem with XT720, but so far I haven't seen that anyone did suggest some solution...
I have bricked two xt720 - and have tried EVERYTHING to revive them, but nothing worked
both time some problem was with dexter froyo
phone just did freezed, then restarted and after that I got bootloop
Click to expand...
Click to collapse
i wonder if anyhow we can skip that loop
well..try obvious things first..
google for RSD Lite (v4.8+) and download 2.1 SBF from this forum, and try to flash it...
if this don't help, I don't think that anything would
tn4 said:
So i had my motorola for a year, the problem happened couple of time but not this worse. My phone(XT-720) now cannot turn on, if i power on the phone it has a black screen and the 4 button on the bottom light up. NOW sometimes the phone turn on and it get stuck on the boot up , when the logo show up the phone shut it self down. If i am lucky the phone starts up right, after about 30min it shut it self off. So then i go in the loop. I have only rooted the phone, and i have done nothing else. When i try to go to the boot menu, the phone says that the battery is too low to program anything , but my phone has about 90% of the battery. I love this phone it work fine but now it has this problem, Any tips or solution u guys can tell me?
Click to expand...
Click to collapse
Download the following first:
1) RSD LITE 4.9
2) MotoHelper
3) Stock ROM of your choice from this thread
After you have downloaded the above, Install MotoHelper followed by RSD Lite. Remove the battery in the phone and re-insert. Press the Power Button+Volume Up Button+ Camera Button all at once. This should take you to Bootloader mode. Connect your phone to your system using a USB cable. Now run RSD Lite in the system. Browse and find the Stock ROM (.sbf) and load it using the RSD Lite. Start flashing. This should take you to back to the Stock settings. Remember this process could take a minimum of 15 mins, please be patient .If any doubts please revert back.