Hi i have a question maybe someone can help?
I'm Having problems with my Xt720 stuck at M logo at boot up. I tried flashing it back to Stock CBW rom following reverendkjr's instructions to the T. after i allow Rsd to go through the Processes, and it says its rebooting phone i give it time to adjust, but still stays on M logo. Rsd is telling me to Please manually power up this phone. I don't know what else to try? I cant do a hard reset either.. Can someone help Please
Have you tried to take out your SD card and reboot the phone again?
I was hit with same issue last time due to a bad SD card.
Alternatively you can try to reflash without a SD card.
yes, i've tried both ways, but no luck either way?
What did you do to get booyloop
Sent from my Milestone using XDA Premium App
mchlbenner said:
What did you do to get booyloop
Sent from my Milestone using XDA Premium App
Click to expand...
Click to collapse
natifan81 said:
Hi i have a question maybe someone can help?
I'm Having problems with my Xt720 stuck at M logo at boot up. I tried flashing it back to Stock CBW rom following reverendkjr's instructions to the T. after i allow Rsd to go through the Processes, and it says its rebooting phone i give it time to adjust, but still stays on M logo. Rsd is telling me to Please manually power up this phone. I don't know what else to try? I cant do a hard reset either.. Can someone help Please
Click to expand...
Click to collapse
..........
what i did to get the bootloop was i took a picture friday night, and it froze up, so i pulled the battery to reboot and its been on M logo since then. when plugged into wall charger it wont charge either
I haye to say this but your phone is bri cked dam can you get into bootloader.
Sent from my Milestone using XDA Premium App
Yes i can get it to bootloader mode, and i've tried to flash it back to stock Cincinnati Bell Rom, but when it completes the tasks it reboots phone and is still getting stuck on M logo Screen??
natifan81 said:
what i did to get the bootloop was i took a picture friday night, and it froze up, so i pulled the battery to reboot and its been on M logo since then. when plugged into wall charger it wont charge either
Click to expand...
Click to collapse
exactly the same thing happened to me...
I flashed froyo, was playing a few hours, and after firing flash phone was frozen and then I got bootloop
I was flashing phone with many different sbf's and nothing helped except official moto service center...
Use RSD lite above 4.9 Version, Download a sbf file for xt-720,go to boot loader and run the sbf file from Rsd lite. Your phone should start working.
if you are able to reach openrecovery, or some other way to access the phone internals,You may turn adb debugging during boot.
So if you have somewhat access to the phone to turn on ad debuging you have to
kill the usbd process ( pkill usbd if busybox is new enough)
then
Code:
echo "msc_adb" > /dev/usb_device_mode
You have to "integrate" that in your startup scripts.
Then issue "adb logcat" . The adb will wait for the phone and will start logging as soon as possible . When that happens, we will be able to adb shell to the phone, even if the display show just some static logo...
If you are not able to access the phone internals, other possibility exists, but requires to be able to fastboot the phone. Then custom initramfs can be prepared, which will include the above early adb enabling .
enabling adb taked from here:
http://code.google.com/p/cyanogenmo...e=update-adb_during_boot_enabler.zip&can=2&q=
have in mind of this issues (not a big deal, at least for me)
http://code.google.com/p/cyanogenmo...atus Priority Version Summary Stars&start=100
Related
I tried following cyanogen wiki on an Inspire 4G. It didn't work and gave "Incorrect Model ID" error.
So I switched to use Hack-Ace tool. Everything worked as expected and I guess I was going good. When Hack-Ace completed, the phone went into an infinite look showing HTC logo then blind to a black screen with background light ON.
I could ADB and reboot in bootloader where I clashed the CM7 ROM. Every step went through fine and it restarted. Now all I get is nothing.
The device shows the HTC Logo on white screen after leaving a while and the vibrator is ON constantly. It doesn't help really but keeps doing that. It will only stop if I remove battery.
Plugging the device into USB doesn't detect on PC.
When tried charging, it shows the error messages and nothing happens, no buttons interact.
I guess I have a full brickd phone now
Have you tried flashing stock ruu thru bootloader
Sent from my Inspire 4G using XDA App
Download and flash this thru bootloader.
http://www.megaupload.com/?d=Q6YYQFIM
Sent from my Inspire 4G using XDA App
Yah, try the ruu. Seeing how it at least turns on means it might be fixable. Can you get into recovery?
Sent from my MB860 using XDA App
I'm trying the link given by creglem
stumpyz9, no man i've not been able to boot into recovery.. the device is doing nothing
kishu_27 said:
I'm trying the link given by creglem
stumpyz9, no man i've not been able to boot into recovery.. the device is doing nothing
Click to expand...
Click to collapse
The ruu will probably be your best bet then
Sent from my MB860 using XDA App
only if i could get it to install... i dunno what'll happen cuz i cannot go to recovery mode. i'm just going to try once
worst part is that this is a friend's phone
not able to open recovery
any other idea guys?
kishu_27 said:
only if i could get it to install... i dunno what'll happen cuz i cannot go to recovery mode. i'm just going to try once
worst part is that this is a friend's phone
Click to expand...
Click to collapse
http://webchat.freenode.net/?channels=#aahkSupport <--- go there to save said friends phone.
kishu_27 said:
not able to open recovery
any other idea guys?
Click to expand...
Click to collapse
You font nerd recovery with that file. Just out it on the root if your sdcard. Meaning not in any folder and boot into bootloader...not recovery then it will recognize the file then just follow onscreen instructions
Sent from my Inspire 4G using XDA App
kishu_27 said:
I tried following cyanogen wiki on an Inspire 4G. It didn't work and gave "Incorrect Model ID" error.
So I switched to use Hack-Ace tool. Everything worked as expected and I guess I was going good. When Hack-Ace completed, the phone went into an infinite look showing HTC logo then blind to a black screen with background light ON.
I could ADB and reboot in bootloader where I clashed the CM7 ROM. Every step went through fine and it restarted. Now all I get is nothing.
The device shows the HTC Logo on white screen after leaving a while and the vibrator is ON constantly. It doesn't help really but keeps doing that. It will only stop if I remove battery.
Plugging the device into USB doesn't detect on PC.
When tried charging, it shows the error messages and nothing happens, no buttons interact.
I guess I have a full brickd phone now
Click to expand...
Click to collapse
Dude download the PD98 file above it is the rooted updated gingerbread ROM. Place it in the root of your SD card (you will have to remove SD card and use adapter to move zip file to root of SD card if PC does not recognize phone with USB cable) and power phone off then power back up holding down power button and volume down button at same time. Phone should go to bootloader then it will recognize the PD98 zip file and ask if you want to istall. Volume up for yes and it will do its thing. No need to try to get into recover phone will do it itself with the PD98 zip file. Zip is (ATT ROM 2.47.502.7 w/Radio - 26.10.04.03_M)
Credit to Football
How do I unbrick an LG P505? I rooted it, deleted a bunch of apps that I never used and when I deleted Nuance something or other it kept giving me an error telling me it had stopped working (apparently it was running on the background) and I couldn't get it to shut up so I shut off the phone. When I turned it back on again it was stuck on the android logo.
I've tried hard reset, but it gave me an error right after the LG setup thing and now whenever I try it again it gets stuck on the android logo screen again.
Any help?
Shyin said:
How do I unbrick an LG P505? I rooted it, deleted a bunch of apps that I never used and when I deleted Nuance something or other it kept giving me an error telling me it had stopped working (apparently it was running on the background) and I couldn't get it to shut up so I shut off the phone. When I turned it back on again it was stuck on the android logo.
I've tried hard reset, but it gave me an error right after the LG setup thing and now whenever I try it again it gets stuck on the android logo screen again.
Any help?
Click to expand...
Click to collapse
Are you having custom recovery or stock one? And what error did you get when you tried to start recovery
Sent from my LG-P500 using Tapatalk
I didn't get to install custom recovery. Right now I managed to get to the fastboot mode screen, but I'm not sure that's gonna help in any way...
How do I start recovery?
Shyin said:
I didn't get to install custom recovery. Right now I managed to get to the fastboot mode screen, but I'm not sure that's gonna help in any way...
How do I start recovery?
Click to expand...
Click to collapse
To start recovery hold volume down +home+power until it comes if recovery starts means u are not bricked but if you are getting fastboot error means your mobile is bricked to unbrick follow this tutorial http://forum.xda-developers.com/showthread.php?t=1088046 and be sure to see every page of the thread for problems that may occur while doing it and their solutions
It works with p500 but I don't know about p509...
Sent from my LG-P500 using Tapatalk
sachin kamboj said:
To start recovery hold volume down +home+power until it comes if recovery starts means u are not bricked but if you are getting fastboot error means your mobile is bricked to unbrick follow this tutorial http://forum.xda-developers.com/showthread.php?t=1088046 and be sure to see every page of the thread for problems that may occur while doing it and their solutions
It works with p500 but I don't know about p509...
Sent from my LG-P500 using Tapatalk
Click to expand...
Click to collapse
HOLY CRAP MAN IT WORKED!
Thank you very very very much!
p505r stuck at lg screen after fastboot fix wiped everything
my wifi kept saying error so I thought id try flashing my phone to a new rom/kernel and I was stuck in fastboot mode as well, I came upon this fastboot fix using cmd etc and it deleted all files on my p505r, and now I can get it to emergency mode OR it stays stuck at the lg logo... and no I cant get into recovery, it loads the android and box thing a progess bar shows up for 3 seconds then the phone reboots again...
im really running out of ideas, can someone please help??? I would really like to give my mom back her phone asap...
so to cover everything again:
phone can go into EMERGENCY MODE or be stuck at the lg logo... no other option is available...
So i had my motorola for a year, the problem happened couple of time but not this worse. My phone(XT-720) now cannot turn on, if i power on the phone it has a black screen and the 4 button on the bottom light up. NOW sometimes the phone turn on and it get stuck on the boot up , when the logo show up the phone shut it self down. If i am lucky the phone starts up right, after about 30min it shut it self off. So then i go in the loop. I have only rooted the phone, and i have done nothing else. When i try to go to the boot menu, the phone says that the battery is too low to program anything , but my phone has about 90% of the battery. I love this phone it work fine but now it has this problem, Any tips or solution u guys can tell me?
Try factory setting or flash a fresh sbf using rsd lite.
.
napnau said:
Try factory setting or flash a fresh sbf using rsd lite.
Click to expand...
Click to collapse
I have tried the factory setting but i havent tried the flash a fresh sbf using rsd lite how do i do that ?
well..this is common problem with XT720, but so far I haven't seen that anyone did suggest some solution...
I have bricked two xt720 - and have tried EVERYTHING to revive them, but nothing worked
both time some problem was with dexter froyo
phone just did freezed, then restarted and after that I got bootloop
pajo985 said:
well..this is common problem with XT720, but so far I haven't seen that anyone did suggest some solution...
I have bricked two xt720 - and have tried EVERYTHING to revive them, but nothing worked
both time some problem was with dexter froyo
phone just did freezed, then restarted and after that I got bootloop
Click to expand...
Click to collapse
i wonder if anyhow we can skip that loop
well..try obvious things first..
google for RSD Lite (v4.8+) and download 2.1 SBF from this forum, and try to flash it...
if this don't help, I don't think that anything would
tn4 said:
So i had my motorola for a year, the problem happened couple of time but not this worse. My phone(XT-720) now cannot turn on, if i power on the phone it has a black screen and the 4 button on the bottom light up. NOW sometimes the phone turn on and it get stuck on the boot up , when the logo show up the phone shut it self down. If i am lucky the phone starts up right, after about 30min it shut it self off. So then i go in the loop. I have only rooted the phone, and i have done nothing else. When i try to go to the boot menu, the phone says that the battery is too low to program anything , but my phone has about 90% of the battery. I love this phone it work fine but now it has this problem, Any tips or solution u guys can tell me?
Click to expand...
Click to collapse
Download the following first:
1) RSD LITE 4.9
2) MotoHelper
3) Stock ROM of your choice from this thread
After you have downloaded the above, Install MotoHelper followed by RSD Lite. Remove the battery in the phone and re-insert. Press the Power Button+Volume Up Button+ Camera Button all at once. This should take you to Bootloader mode. Connect your phone to your system using a USB cable. Now run RSD Lite in the system. Browse and find the Stock ROM (.sbf) and load it using the RSD Lite. Start flashing. This should take you to back to the Stock settings. Remember this process could take a minimum of 15 mins, please be patient .If any doubts please revert back.
Hi, i tried updating my tab to the leaked 4.1 OTA and after following the instructions my tab wont boot. It will only play the boot animation then hang at the samsung logo for about ten minutes then go black. I cant get it into download or recovery mode, but when i plug it into the wall it shows the battery icon. Also odin recognises the tab while its hanging at the samsung logo.. i have heard talk of a usb jig but not for this tablet.. Can anyone offer any advice? thanks in advance
If Odin sees it a USB jig isn't needed.. Just flash the stock f/w tar and you're good
EDIT: fail... No download mode... Umm... Sounds like you're in a bootloop... No idea why recovery and download wouldnt work tho...
Sent from my XT907 using Tapatalk 2
HulianMango said:
Hi, i tried updating my tab to the leaked 4.1 OTA and after following the instructions my tab wont boot. It will only play the boot animation then hang at the samsung logo for about ten minutes then go black. I cant get it into download or recovery mode, but when i plug it into the wall it shows the battery icon. Also odin recognises the tab while its hanging at the samsung logo.. i have heard talk of a usb jig but not for this tablet.. Can anyone offer any advice? thanks in advance
Click to expand...
Click to collapse
The good news is that the device probably isn't bricked. If it was unfixably bricked you shouldn't even see the boot animation.
It's figuring out how to fix it that's the hard part.
What you've clearly done as far as the ROM though is installed the rom improperly somehow. Might have missed as step in the process, or the ROM could have just been a bad download and no fault of your own. These things happen to the best of us.
Assuming that clockworkmod recovery is still installed, and you just can't get into it, you might try to see if you can access it using adb from your computer.
If you have abd installed boot the device as far as it'll go then see if you can connect to it with adb and run this command...
abd reboot recovery
Also try
adb reboot boot loader
If you don't have adb installed read this...
http://forum.xda-developers.com/showthread.php?t=1853159
If that doesn't work (and I only give it a 50-50 shot at best as adb isn't always useful during the boot process, which is where you are stuck....then we'll think of something else.
Also please describe the steps you are using to try and get into recovery just to make sure you're trying it the right way.
And after it gets stuck at the Samsung screen are you turning it off completely by holding the power, volume up, and volume down all at once? That should shut the device off completely, which is where you need to be before trying to boot into recovery.
Thank you both! ! I managed to get it going
Sent from my GT-P5113 using xda app-developers app
HulianMango said:
Thank you both! ! I managed to get it going
Sent from my GT-P5113 using xda app-developers app
Click to expand...
Click to collapse
Please share how you got it fixed and what ended up working.
That way when someone else Google's the same probelm a year from now and finds this thread, he'll have the answer waiting for him. (See my signature cartoon from XKDC.com for a comical represensation of why not explaining what the outcome was is annoying)
Glad it got working!
Well i asked in the thread for that rom and it was suggested that the battery needed charging, I didnt think this was the case cuz my tab had been plugged in to the wall for about an hour already but I let it sit for a couple hours and it finally booted although it said there was 15% power left... its still charging really slow but it boots now!
Sent from my GT-P5113 using xda app-developers app
Hello XDA! New member here with a huge problem.
So I recently flashed Helly Bean 4.2.2 onto my Nexus S 4G and it was great, really fast! But for some reason, when my phone died and I powered it back on, it was stuck at the boot animation. I still cannot get passed it. Now I know an issue like this can be solved through the recovery (I use TWRP) but some months ago, my power button messed up. It's as if it's always in the pushed in position even though it isn't, it still clicks like the first day i got it. My phone automatically boots up when i connect my charger or put a charged battery in. I can get into fastboot mode but due to messed up power button, I can't scroll down to the recover option and even if i could, I wouldn't be able to execute it. So that's my problem, I'm stuck at the boot animation, and I'm stuck at the fastboot menu. Is there anyway I can reset factor settings/flash another rom/ or even revert back to stock and unroot from fastboot using some program?? I'd prefer not to lose anything on my SD card though, but if it has to be done then so be it. ANY HELP WILL BE GREATLY APPRECIATED!!!
first.. did you eneble Usb debuging when you had a working rom..?? If yes then you should try this while you have the boot loop to get into recovery.. you could then make a factory reset and you should be fine.. I hope this helps you..
mikekir97 said:
first.. did you eneble Usb debuging when you had a working rom..?? If yes then you should try this while you have the boot loop to get into recovery.. you could then make a factory reset and you should be fine.. I hope this helps you..
Click to expand...
Click to collapse
I did have USB-debugging on, always do. I've tried booting into recovery using the quick tools but all it says "booting into recovery" and nothing happens. My phone just stays on the boot animation
Thanks anyway though!
SuperHamm said:
I did have USB-debugging on, always do. I've tried booting into recovery using the quick tools but all it says "booting into recovery" and nothing happens. My phone just stays on the boot animation
Thanks anyway though!
Click to expand...
Click to collapse
Sorry to hear.. worked with me some time ago..
I was looking again in this post and i forgot to mention anything about drivers.. Do you have them on you pc/laptop..?
Sent from my Nexus S using xda app-developers app