Database Info

one s water damage. hope for repair?

ok so today a kid my mom babysits got ahold of my HOS and dunked it in the toilet... i caught him in the act and immediately grabbed it and dried it off best i could. it was in the water maybe for 1 second. when i pulled it out it was still on. lock button worked but screen was completely unresponsive. kept trying to unlock the screen but as i said it wasn't responding to me touching it. then it just turned off by itself and wouldn't turn back on at all. the notification light turned on (randomly, not from response to me trying to turn it off or on) and it was yellow and red. not completely one or the other. put it in a bowl of rice for a good 8 or 9 hours. pulled it out and now the notification light is off and still not responding to my attempts to turn it on. plugged it in to charger and no charging light. is there any hope for repairing it? or do i need to just buy a new phone...
not sure if it matters but details never hurt anyone.
s4
liquidsmooth jb rom
s-off

If you dont have any insurance or warranty that covers such damages, I would take it apart and clean/dry each part individually with some tissues and those things you use to clean your ears (no idea what theyre called in english lol).
The odds are the screen is busted though, and will need a replacement.
The first thing you should do is getting the battery unplugged, so the device is completely powerless and let it be powerless for a day or 2.
Obviously, unplugging the battery on the HOS means disassembling the whole device...

j tag is the solution for ur problem..
Sent from my GT-I8150 using XDA Premium HD app

Well, Listen to me, ive had experience.
If you have the know how to break everything apart and clean the corrosion, then you might be lucky. If not, repairmen could do it for you, but with each option you lose warranty. And it is not guaranteed it will work 100%. If it does, then you just have to live with no warranty, if not, the repair centre will change your motherboard, for me that cost 190€.
So you pick.
If i would have known better on my case, i would have let repairmen try and clean it all up for a mere 30€ (if they could have repaired it) and THEN sent the device to offical repair centre when their efforts would have been in vain, cause you know, nevertheless the repairs are not under warranty for water damage.
Goatshocker said:
clean/dry each part individually with some tissues and those things you use to clean your ears (no idea what theyre called in english lol).
Click to expand...
Click to collapse
This will never work since you probably already have corrosion on the motherboard.

hunabku said:
This will never work since you probably already have corrosion on the motherboard.
Click to expand...
Click to collapse
Ive saved 3 laptops by doing that, so it does work. Corrosion doesnt appear THAT fast.
Although reading OPs post again I see it was quite a while ago it happened, so there might be some minor corrosion.
Running a hairdryer across the board can save some bad connections in some cases as well- obviously not heating the board to sh*t, just a quicky.

Water Damaged AT&T LG G2 D800

Hi guys. Today I made the mistake of dropping my AT&T LG G2 D800 into the toilet.
I promptly removed the phone from the toilet, it was submerged for about 2-3 seconds. The phone stayed on for a few seconds but then froze and powered off. I disassembled it as quickly as possible (accidentally cracking the back cover in the process), and put the disassembled pieces in a large container of rice.
I'm wondering if you guys have any suggestions, and was also wondering how the battery can be completely removed.
I've also taken a photo of what looks like some sort of corrosion/damage on the logic board - if it helps. Otherwise, I don't see anything that looks damaged electronically anywhere else on the phone.
Any ideas or assistance would be appreciated, thank you!

First off, I'm sorry to hear about your loss I once gave my sister her first smartphone and she dropped it in the toilet as well good thing it wasn't a G2. The battery is hard to remove due to its design. They utilized all the space they could, so you have to remove some parts from the phone to be able to pull out the battery. Keep it in rice for a few days, reassemble and try your luck. Put the rest of the device in rice too, to ensure that all water has been drained.
Sent from my LG-D802 using XDA Premium 4 mobile app

Dropped in a basin of water
It's my usual practice to bring with me my g2 in the bathroom. I dropped it, I dont know how, in a basin of water, a little fortunate than the toilet bowl. I was able to touch the screen coz I want to turn it off. But it just suddenly did not work. So, I gave up and left it in sunlight in the living room. The next day I tried to turn it on. Led turned on then dead again. I gave up again and just left it somewhere. After two days, I, out of habit, took it where I left it and turned it on. Viola! It turned on! What I did, I turned it off and charged it full. Now, to make sure, I put it inside our rice dispenser. I'll try to turn it on again tomorrow. Fingers crossed.

faithraze said:
It's my usual practice to bring with me my g2 in the bathroom. I dropped it, I dont know how, in a basin of water, a little fortunate than the toilet bowl. I was able to touch the screen coz I want to turn it off. But it just suddenly did not work. So, I gave up and left it in sunlight in the living room. The next day I tried to turn it on. Led turned on then dead again. I gave up again and just left it somewhere. After two days, I, out of habit, took it where I left it and turned it on. Viola! It turned on! What I did, I turned it off and charged it full. Now, to make sure, I put it inside our rice dispenser. I'll try to turn it on again tomorrow. Fingers crossed.
Click to expand...
Click to collapse
Your best bet friend, is or was to turn off immediately and tear it down pull battery and hit with a dry chem spray heavily. Well not too heavy but then after that hair dry. Rice works in time but not many people will tell you rice can leave a starch film inside of your internals leaving you in a bad way if ever it was heated to liquify the starch. It will coat the internals and youll never get it working again. Though rare. It happens. Try to get a can of water erase. Or canned evaporater. I use it on repairs and have had many positive outcomes. When pulling battery on the devices especially lg be careful of the older nexus 4 and older devices as their internal battery flex terminals with pull right out.
Anyway. Hope you get it working bro. Peace
Sent from my LG-D800 using XDA Free mobile app

Droid2drummer said:
Your best bet friend, is or was to turn off immediately and tear it down pull battery and hit with a dry chem spray heavily. Well not too heavy but then after that hair dry. Rice works in time but not many people will tell you rice can leave a starch film inside of your internals leaving you in a bad way if ever it was heated to liquify the starch. It will coat the internals and youll never get it working again. Though rare. It happens. Try to get a can of water erase. Or canned evaporater. I use it on repairs and have had many positive outcomes. When pulling battery on the devices especially lg be careful of the older nexus 4 and older devices as their internal battery flex terminals with pull right out.
Anyway. Hope you get it working bro. Peace
Sent from my LG-D800 using XDA Free mobile app
Click to expand...
Click to collapse
The thing is, d802's battery is not removable and I dont have the tools to remove the back cover. No service center here too. Luckily, my mighty G2 is working perfectly now.

[Q] Nexus 5 exposed to water

Hello Guys
A while ago i received my N5 and i really enjoyed it! 2 days, i drop the thing in the toilet. :crying:
Okay so my insurance wont cover it and the phone has dryed in Rice and i followed all the advices that were online.
Tho i couldnt remove the batteri and i know this is a crucial point since the current+water will destroy the circuits.
Now my phone either wont start, or sometimes it will try to boot showing the google logo and then crashing (it cant enter the OS).
Is it worth trying to repair the thing? I dont think it will be a problem for me to change a circuit board og replace another part, but since i dont have any experience with phones i dont know what part i should start with.
The phone costs 580 dollars here in Denmark where i live.
Is it worth it ?
Regards Jesper

You can open it up, get some rubbing alcohol and submerge the board into the rubbing alcohol. Use a soft tooth brush and scrub the board. Usually the board gets corrosion/dirt from the water. Once thoroughly clean put a blow dryer to it (use medium to no heat. DO NOT PUT THE BATTERY IN THE ALCOHOL. ONLY THE BOARD!
I've tried this before and it worked like a charm when my Galaxy Nexus had water damage.
Sent from my Nexus 5 using XDA Premium 4 mobile app

OuncE718 said:
You can open it up, get some rubbing alcohol and submerge the board into the rubbing alcohol. Use a soft tooth brush and scrub the board. Usually the board gets corrosion/dirt from the water. Once thoroughly clean put a blow dryer to it (use medium to no heat. DO NOT PUT THE BATTERY IN THE ALCOHOL. ONLY THE BOARD!
I've tried this before and it worked like a charm when my Galaxy Nexus had water damage.
Sent from my Nexus 5 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks ! I will grab a repar kit tomorrow and then try what you suggested! sounds like a good idea.
regards

---------- Post added at 12:18 PM ---------- Previous post was at 12:16 PM ----------
ProfessorJ said:
Thanks ! I will grab a repar kit tomorrow and then try what you suggested! sounds like a good idea.
regards
Click to expand...
Click to collapse
You're welcome. You can watch a few videos on YouTube to see what I mean.
Sent from my Nexus 5 using XDA Premium 4 mobile app

OuncE718 said:
---------- Post added at 12:18 PM ---------- Previous post was at 12:16 PM ----------
You're welcome. You can watch a few videos on YouTube to see what I mean.
Sent from my Nexus 5 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Out of curiosity could you link a video? doesnt have to be the N5 Board

ProfessorJ said:
Hello Guys
A while ago i received my N5 and i really enjoyed it! 2 days, i drop the thing in the toilet. :crying:
Okay so my insurance wont cover it and the phone has dryed in Rice and i followed all the advices that were online.
Tho i couldnt remove the batteri and i know this is a crucial point since the current+water will destroy the circuits.
Now my phone either wont start, or sometimes it will try to boot showing the google logo and then crashing (it cant enter the OS).
Is it worth trying to repair the thing? I dont think it will be a problem for me to change a circuit board og replace another part, but since i dont have any experience with phones i dont know what part i should start with.
The phone costs 580 dollars here in Denmark where i live.
Is it worth it ?
Regards Jesper
Click to expand...
Click to collapse
As soon as you dropped it in water you should have turned it off and left it off for days and possibly even took a hairdryer to it or let it sit in front of the heat vent.

Number one mistake is trying to turn it on. If anybody else drops the nexus in water. Because it has no removable battery cover. Rice won't do the trick. It would take way too long and the water would have already rusted the metal components and trashed all the pop connectors. If you drop the phone is water. Quickly take the entire phone apart. Than put all the pieces in rice. That will allow the rice to actually absorb the left over water. YouTube "nexus 5 tear down". Its always a good thing to know how to do this.
Sent from my Nexus 5 using xda app-developers app

I just finished assembling the Nexus again and im a very happy man!
After disasembling the phone i found that the top board was very teared by the water and it was clear how some of the sockets had poor or no connection.
I used pure alchol (Dunno what its called in english) and a small toothbrush to clean the board. I dryed the board with a hair dryer on cold setting to avoid over heating the CPU parts. Now the phone works! and it doesnt look like it has any pearment faults or flaws. Even the display is normal and all my previous settings and the OS was intact. Thanks for the help everybody! and yes the best thing to do is remove the powersource and dry the boards individually if exposed to water
Best regards Jesper

ProfessorJ said:
I just finished assembling the Nexus again and im a very happy man!
After disasembling the phone i found that the top board was very teared by the water and it was clear how some of the sockets had poor or no connection.
I used pure alchol (Dunno what its called in english) and a small toothbrush to clean the board. I dryed the board with a hair dryer on cold setting to avoid over heating the CPU parts. Now the phone works! and it doesnt look like it has any pearment faults or flaws. Even the display is normal and all my previous settings and the OS was intact. Thanks for the help everybody! and yes the best thing to do is remove the powersource and dry the boards individually if exposed to water
Best regards Jesper
Click to expand...
Click to collapse
Bravo!
Sent from my Nexus 5 using xda app-developers app

ProfessorJ said:
I just finished assembling the Nexus again and im a very happy man!
After disasembling the phone i found that the top board was very teared by the water and it was clear how some of the sockets had poor or no connection.
I used pure alchol (Dunno what its called in english) and a small toothbrush to clean the board. I dryed the board with a hair dryer on cold setting to avoid over heating the CPU parts. Now the phone works! and it doesnt look like it has any pearment faults or flaws. Even the display is normal and all my previous settings and the OS was intact. Thanks for the help everybody! and yes the best thing to do is remove the powersource and dry the boards individually if exposed to water
Best regards Jesper
Click to expand...
Click to collapse
I'm glad I could help. Now please help me and hit the thanks button.
Sent from my Nexus 5 using XDA Premium 4 mobile app

Hey guys. I followed the instructions and have gotten my phone to power. Problem is when it goes from the power up screen that say "Google" to the colored balls, the balls freeze and it goes back to "Google" and freezing there. Any ideas on what I can do to get it to boot?
I just need it to boot long enough to retrieve my pictures and this hot chick's number I got right before the phone was dropped in the pool. Thanks.
edit: When I hold Volume Down/Power, I can get it to the bootloader. Anything I can do from here to salvage my stuff? I'm not familiar with bootloader options. Plugged into my computer, I can hear my PC make the noise as though it's connected which typically then leads to the phone's drive being accessible on the computer however it then immediately makes the noise of the phone being disconnected.

I believe I am having the same problem as you. I briefly dropped it into a creek for no more than a few seconds. That was enough to make the display unresponsive to touch. I was able to power down and quickly did so.
Unfortunately I wasn't near any rice immediately (motorcycle) so I put the phone in my mesh jacket in 100F weather and hoped for the best. I left it off at this point. When I got home I turned it back on (stupid I know) and the N5 didn't boot, only stopped at "Google" boot. I powered down the phone and rebooted, this time it worked. A quick checkup showed the external speaker didn't work for Play music, but did work for T-mobile visual voicemail. Also, the earpiece didn't work when I attempted to make calls.
At this point I realize I probably screwed up the phone big time. Once I realized not all components were working I put the phone in a ziplock bag with brown rice new from the store. I guess I'll let it sit for 48 hours and then attempt again. If it doesn't work, I'll attempt taking the phone apart and cleaning each part. And I'm really only going to attempt that because this phone isn't even paid off!!
These phones need to be made tougher! I am losing hope that there's any chance of my phone surviving at this point.
jaymzb0nd said:
Hey guys. I followed the instructions and have gotten my phone to power. Problem is when it goes from the power up screen that say "Google" to the colored balls, the balls freeze and it goes back to "Google" and freezing there. Any ideas on what I can do to get it to boot?
I just need it to boot long enough to retrieve my pictures and this hot chick's number I got right before the phone was dropped in the pool. Thanks.
edit: When I hold Volume Down/Power, I can get it to the bootloader. Anything I can do from here to salvage my stuff? I'm not familiar with bootloader options. Plugged into my computer, I can hear my PC make the noise as though it's connected which typically then leads to the phone's drive being accessible on the computer however it then immediately makes the noise of the phone being disconnected.
Click to expand...
Click to collapse

Nexus 5 Water damaged
OuncE718 said:
You can open it up, get some rubbing alcohol and submerge the board into the rubbing alcohol. Use a soft tooth brush and scrub the board. Usually the board gets corrosion/dirt from the water. Once thoroughly clean put a blow dryer to it (use medium to no heat. DO NOT PUT THE BATTERY IN THE ALCOHOL. ONLY THE BOARD!
I've tried this before and it worked like a charm when my Galaxy Nexus had water damage.
Sent from my Nexus 5 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I dropped my nexus 5 in the pool while I was on vacation. When i came home i clean all the parts with rubbing alcohol, my phone worked! A day later i tried again but my phone froze on the start-up screen (with the magical floaty balls) and i haven't been able to turn on my phone since i got it to work. What should i do? is it worth saving? PLEASE HELP!!!:crying::crying::crying:

Nexus 5 Water damaged
Hi guyz,
I need some help, lately my nexus 5 was been water damaged. I immediately follow OuncE718 suggestion but I still experiencing problem. When I press on the phone I can feel the vibration but Google-boot logo will not display and it will only display a white-dim light in the bottom part of the screen. I tried to connect it in a Windows computer it will be recognised as a Nexus 5 phone. Does it mean I had to replace my LCD.?
John
Cheers

tolmike23 said:
Hi guyz,
I need some help, lately my nexus 5 was been water damaged. I immediately follow OuncE718 suggestion but I still experiencing problem. When I press on the phone I can feel the vibration but Google-boot logo will not display and it will only display a white-dim light in the bottom part of the screen. I tried to connect it in a Windows computer it will be recognised as a Nexus 5 phone. Does it mean I had to replace my LCD.?
John
Cheers
Click to expand...
Click to collapse
Who knows what damage did the water do? If the corrosion sets in, your device will be hosed for sure.
It's really a fools errand to fix water damaged phones as no one can be sure the extent of the damage.
If you take it to a service centre, they'll most probably replace the lcd + mobo which will cost a bomb.
- Sent from an IceCold Hammerhead!

vin4yak said:
Who knows what damage did the water do? If the corrosion sets in, your device will be hosed for sure.
It's really a fools errand to fix water damaged phones as no one can be sure the extent of the damage.
If you take it to a service centre, they'll most probably replace the lcd + mobo which will cost a bomb.
- Sent from an IceCold Hammerhead!
Click to expand...
Click to collapse
Thanks vin4yak I probably buy a new LCD as I have no choice it is really a bomb!.

tolmike23 said:
Thanks vin4yak I probably buy a new LCD as I have no choice it is really a bomb!.
Click to expand...
Click to collapse
If you buy a new LCD, how will you know the Motherboard still works? Then what if you have to buy new motherboard?
Cut your losses. Replace the whole phone. Then get insurance

This ^
Spending money on a water damaged device is usually money wasted. Cause there's usually more things wrecked you find out along the way.
Save the money to go towards a new device.

I had the same problem, I used all the methods that I've read with no solution, my last hope is that the battery got damaged, is there a chance that maybe the battery is the problem? I can get a replacement for 20 dollars, but what do you think? thanks

saman0suke1 said:
I had the same problem, I used all the methods that I've read with no solution, my last hope is that the battery got damaged, is there a chance that maybe the battery is the problem? I can get a replacement for 20 dollars, but what do you think? thanks
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=56142150

[Q] Nexus 5 boot loop after it fell in water

Okay, so 2 weeks ago I dropped my N5 in a bucket of water. I took it out after 2 seconds and just tapped the power button to check if it was still on (so I could turn it off). It wasn't.
I got some dry rice, and covered the phone with it in a packet. I also ordered silica gel packets online.
3 days later, I tried turning it on, but it didn't, so I put the phone in a bag with silica packets inside another bag with rice and left it for a week.
I tried turning it on, but no luck.
So I kept it for another week in the same way. Today, I tried charging it and the screen came on. It shows the charging animation for a few seconds before it freezes and tries to boot.
It tries to boot, but it gets stuck either at the google logo or the animation with the colored orbs, and after a couple of seconds, loops back to the google logo.
It goes into fastboot mode and is stable there, but won't boot or go into recovery.
Any suggestions? I was hoping I could fix it myself or at least recover my data before giving it to the service center.

Let's skip to the end.... You're not fixing this. You're not recovering any data. I hope this saves you some time.
Sent from my Nexus 5 using Tapatalk

Can it be fixed at all? At the LG Service Center maybe?

No unfortunately not..water is both very corrosive and very conductive. When a device is powered on, water conducts electricity between components that shouldn't connect and burns them out and shorts them. Also the longer it is wet, the more corrosion that occurs.
People who manage to dry it out immediately over a 3 day period who end up with a working device are very lucky. If it doesn't work after this, its never going to work. Service centres won't touch water damaged devices. The other components can't be guaranteed. Some people manage to clean up the erosion with alcohols but even this is a long shot at this point.
Sent from my Nexus 5 using Tapatalk

rootSU said:
No unfortunately not..water is both very corrosive and very conductive. When a device is powered on, water conducts electricity between components that shouldn't connect and burns them out and shorts them. Also the longer it is wet, the more corrosion that occurs.
People who manage to dry it out immediately over a 3 day period who end up with a working device are very lucky. If it doesn't work after this, its never going to work. Service centres won't touch water damaged devices. The other components can't be guaranteed. Some people manage to clean up the erosion with alcohols but even this is a long shot at this point.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
I thought so too, but when it got into fastboot, i thought there was some hope.
Thanks anyway.

sidaster said:
I thought so too, but when it got into fastboot, i thought there was some hope.
Thanks anyway.
Click to expand...
Click to collapse
Emmc is fried.. God knows what other damages the water has done.. It's best you go with the insurance route (if you have one) or get a new phone.
Sorry for your loss!
- Sent from an IceCold Hammerhead!

Don't waste a cent on it. Save your money to go towards a new device..

[Q] Washing machine vs Nexus 5

So... my n5 was submerged into washing maching for at least 10-15 mins. and I'm using the traditional method, ( dip into rice bucket ) and leave it overnight, for the rice to absorb all the moisture and stuff. :crying:
I've remove the sim tray and cover n5 with rice.
I hope when I wake up later, it'll be able to work.
Is there any method I can restore the phone's files even if it is dead?
For example, using adb to control the phone?
Or better yet, if phone is able to boot, but screen is damaged, can it emulate the *image* to some software and we control from there or something?
Please give me all the possible solutions for getting the phone dry up or restore the files..
Update 1: sorry for not reading the main thread in General, was too furious.
When I wake up, tried to turn on, but fail. Then I went to remove the cover, there's water inside, then remove the screw and battery, there's water inside. After drying up everything, I put to rice again. Now I'm in office, hope my phone will wake up from deep sleep dead sleep later.
But still, any idea to recover the files inside the phone? I hope I don't damage the internal when I tried to turn on just now, how to check if battery or the motherboard is damaged?
Help please :crying:

up, updates.

Shouldn't really bump if it's been less than 24 hours. But, I'd leave it in the rice for two days. Overnight isn't long enough. Good luck!
If it starts up and you are unlocked and have a custom recovery you might be able to save files.
Sent from my Nexus 9 using XDA Free mobile app

jd1639 said:
Shouldn't really bump if it's been less than 24 hours. But, I'd leave it in the rice for two days. Overnight isn't long enough. Good luck!
If it starts up and you are unlocked and have a custom recovery you might be able to save files.
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
yes, its unlocked and have custom rec and custom ROM installed. I'm just hoping it could boot up or at least show some sign that its still half alive. I really need those files asap. I refuse to use my whatsapp in another phone. And it is my main source of connecting people other than calling.

I would use silica gel over rice

xIceCream said:
When I wake up, tried to turn on, but fail. Then I went to remove the cover, there's water inside
Click to expand...
Click to collapse
Sorry, but your device is now likely not to boot at all regardless what you try now.

Always , Always , Always open up the phone after a water immersion. Open , disassemble completely , rinse with IPA , then distilled water , then dry with a blow drier . Saved an iphone 3g , a samsung s2 , htc desire and desire x like this. My desire x ( after a 15 min dunk in the river ) still works - and it's been 2 years since then.
Rice doesn't work - at all in my experience. And just leaving the battery in for 24h means you have every chance to kill you phone.
Edit : data recovery will be IMO almost impossible without paying at the very least a few thousand dollars. If the EMMC is fried ad another order of magnitude to the bill.

Niflheimer said:
Always , Always , Always open up the phone after a water immersion. Open , disassemble completely , rinse with IPA , then distilled water , then dry with a blow drier . Saved an iphone 3g , a samsung s2 , htc desire and desire x like this. My desire x ( after a 15 min dunk in the river ) still works - and it's been 2 years since then.
Rice doesn't work - at all in my experience. And just leaving the battery in for 24h means you have every chance to kill you phone.
Edit : data recovery will be IMO almost impossible without paying at the very least a few thousand dollars. If the EMMC is fried ad another order of magnitude to the bill.
Click to expand...
Click to collapse
Don't have and don't know where to get IPA at my country here, will search around later.
how in the world would it takes a few thousand dollars. thats insane!! damn.
Hopefully it'll show me some signal of the phone later when I got back from work. :fingers-crossed: But I have a bad feeling. Lol.
Anyway, thanks for your answer! Will note it down

Most of the time there's no chance of reading the NAND using the phone itself.
That means you need to desolder it ( extremely hard for Nexus 5 since it's epoxied as well , you need to mill the pcb from the back side until you reach the solder blobs ) , prototype a break-out board for it , interface it and read it. No one will give you any warranties for the success of the process.
A brand new NAND without glue , full datasheets and known protocol ? 300$ an hour with a 6 hour minimum.
Water damage + glue ? I never got a quote for that , but it's probably going to be 3000$ an hour - and it will take at least 2 hours just to mill the pcb off. Add another hour to clean it , 3+ hours to proto the board and either make it in-house or have it made at some pcb fab (though they won''t bill you for the waiting time if you are lucky ) , another hour to put the chip in , and countless hours to reverse engineer the protocol and get the data out - probably somewhat corrupted as well.
TLDR : unless you need 64bit variables for your income statement NOT worth it.

If the data stored on the phone is so damn important, why didn't you have a backup of it? Why was the only copy of this data on an easily lost, easily broken, unreliable storage medium in your pocket?
The problem with washing machines is you're not just dealing with water, you have some fairly serious soap too, and this is really what your concern is. Soap is alkaline and corrodes the traces inside the phone. You really need to immediately strip the phone down; rinse the phone thoroughly with distilled water and then dry well for a few days.

You should have just put it in the dryer after its wash
Sent from my Nexus 5 using Tapatalk (the older 4.9.5 not that new 4.10 abomination they released for god knows why reason)

GoneTomorrow said:
If the data stored on the phone is so damn important, why didn't you have a backup of it? Why was the only copy of this data on an easily lost, easily broken, unreliable storage medium in your pocket?
The problem with washing machines is you're not just dealing with water, you have some fairly serious soap too, and this is really what your concern is. Soap is alkaline and corrodes the traces inside the phone. You really need to immediately strip the phone down; rinse the phone thoroughly with distilled water and then dry well for a few days.
Click to expand...
Click to collapse
15 minutes , powered on at first in very conductive water ( soap+dirt+hot water) . It's too late for a rinse since I doubt there will be anything working in that phone anymore. Not to mention the mechanical action . If the battery wasn't in it might have survived , albeit with a lot of possible damage.

Ladies and gentleman. My phone survived.
Just plugged back everything, and it boots up. Thank god man. Now I jsut need to back up everything and extract the data out of it. Yay.
My screen has a new 3d effect tho. Water is inside, LOL. It has some nice blue color. Happy me. Woots.
Thank all of you guys for the possible solutions and feedback! Rock on!!

xIceCream said:
Ladies and gentleman. My phone survived.
Just plugged back everything, and it boots up. Thank god man. Now I jsut need to back up everything and extract the data out of it. Yay.
My screen has a new 3d effect tho. Water is inside, LOL. It has some nice blue color. Happy me. Woots.
Thank all of you guys for the possible solutions and feedback! Rock on!!
Click to expand...
Click to collapse
Considering it was in the washing machine, you didn't remove the battery, attempted to turn it on, then water came out when you finally opened it up..
You're lucky it has any sign of life at all.

Lethargy said:
Considering it was in the washing machine, you didn't remove the battery, attempted to turn it on, then water came out when you finally opened it up..
You're lucky it has any sign of life at all.
Click to expand...
Click to collapse
Yes, I know right!
Took out from w.s, turn it on, screen flashes > dip phone to rice for 8 hours > tried turn it on, nothing happens > remove cover and screws and everything > dry up water > dip to rice for another sweet 15 hours ( working + part time studies ), now reached home, assemble everything, turn it on, and WALLA!
Backing up everything now. :fingers-crossed: :highfive: :laugh: :victory:

xIceCream said:
Backing up everything now. :fingers-crossed: :highfive: :laugh: :victory:
Click to expand...
Click to collapse
I am really happy for you Next time though, set up automated backup options so that you don't have to worry about the data inside the phone.

xIceCream said:
Ladies and gentleman. My phone survived.
Just plugged back everything, and it boots up. Thank god man. Now I jsut need to back up everything and extract the data out of it. Yay.
My screen has a new 3d effect tho. Water is inside, LOL. It has some nice blue color. Happy me. Woots.
Thank all of you guys for the possible solutions and feedback! Rock on!!
Click to expand...
Click to collapse
I'm amazed! I suppose it's possible the water was conductive enough to actually put the battery into protection right away

KreAch3R said:
I am really happy for you Next time though, set up automated backup options so that you don't have to worry about the data inside the phone.
Click to expand...
Click to collapse
Thank you! Yea, will do that next time. Painful lesson to learn! Will note that!
Niflheimer said:
I'm amazed! I suppose it's possible the water was conductive enough to actually put the battery into protection right away
Click to expand...
Click to collapse
Yea. Nexus the magician! But all in all, speaker doesn't work, 3.5mm jack doesn't work. At least all my data are there!

Take a backup and buy a new phone. Lol.
Sent from my Nexus 5 using XDA Free mobile app

Could still fail yet..