[Q] Washing machine vs Nexus 5 - Nexus 5 Q&A, Help & Troubleshooting

So... my n5 was submerged into washing maching for at least 10-15 mins. and I'm using the traditional method, ( dip into rice bucket ) and leave it overnight, for the rice to absorb all the moisture and stuff. :crying:
I've remove the sim tray and cover n5 with rice.
I hope when I wake up later, it'll be able to work.
Is there any method I can restore the phone's files even if it is dead?
For example, using adb to control the phone?
Or better yet, if phone is able to boot, but screen is damaged, can it emulate the *image* to some software and we control from there or something?
Please give me all the possible solutions for getting the phone dry up or restore the files..
Update 1: sorry for not reading the main thread in General, was too furious.
When I wake up, tried to turn on, but fail. Then I went to remove the cover, there's water inside, then remove the screw and battery, there's water inside. After drying up everything, I put to rice again. Now I'm in office, hope my phone will wake up from deep sleep dead sleep later.
But still, any idea to recover the files inside the phone? I hope I don't damage the internal when I tried to turn on just now, how to check if battery or the motherboard is damaged?
Help please :crying:

up, updates.

Shouldn't really bump if it's been less than 24 hours. But, I'd leave it in the rice for two days. Overnight isn't long enough. Good luck!
If it starts up and you are unlocked and have a custom recovery you might be able to save files.
Sent from my Nexus 9 using XDA Free mobile app

jd1639 said:
Shouldn't really bump if it's been less than 24 hours. But, I'd leave it in the rice for two days. Overnight isn't long enough. Good luck!
If it starts up and you are unlocked and have a custom recovery you might be able to save files.
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
yes, its unlocked and have custom rec and custom ROM installed. I'm just hoping it could boot up or at least show some sign that its still half alive. I really need those files asap. I refuse to use my whatsapp in another phone. And it is my main source of connecting people other than calling.

I would use silica gel over rice

xIceCream said:
When I wake up, tried to turn on, but fail. Then I went to remove the cover, there's water inside
Click to expand...
Click to collapse
Sorry, but your device is now likely not to boot at all regardless what you try now.

Always , Always , Always open up the phone after a water immersion. Open , disassemble completely , rinse with IPA , then distilled water , then dry with a blow drier . Saved an iphone 3g , a samsung s2 , htc desire and desire x like this. My desire x ( after a 15 min dunk in the river ) still works - and it's been 2 years since then.
Rice doesn't work - at all in my experience. And just leaving the battery in for 24h means you have every chance to kill you phone.
Edit : data recovery will be IMO almost impossible without paying at the very least a few thousand dollars. If the EMMC is fried ad another order of magnitude to the bill.

Niflheimer said:
Always , Always , Always open up the phone after a water immersion. Open , disassemble completely , rinse with IPA , then distilled water , then dry with a blow drier . Saved an iphone 3g , a samsung s2 , htc desire and desire x like this. My desire x ( after a 15 min dunk in the river ) still works - and it's been 2 years since then.
Rice doesn't work - at all in my experience. And just leaving the battery in for 24h means you have every chance to kill you phone.
Edit : data recovery will be IMO almost impossible without paying at the very least a few thousand dollars. If the EMMC is fried ad another order of magnitude to the bill.
Click to expand...
Click to collapse
Don't have and don't know where to get IPA at my country here, will search around later.
how in the world would it takes a few thousand dollars. thats insane!! damn.
Hopefully it'll show me some signal of the phone later when I got back from work. :fingers-crossed: But I have a bad feeling. Lol.
Anyway, thanks for your answer! Will note it down

Most of the time there's no chance of reading the NAND using the phone itself.
That means you need to desolder it ( extremely hard for Nexus 5 since it's epoxied as well , you need to mill the pcb from the back side until you reach the solder blobs ) , prototype a break-out board for it , interface it and read it. No one will give you any warranties for the success of the process.
A brand new NAND without glue , full datasheets and known protocol ? 300$ an hour with a 6 hour minimum.
Water damage + glue ? I never got a quote for that , but it's probably going to be 3000$ an hour - and it will take at least 2 hours just to mill the pcb off. Add another hour to clean it , 3+ hours to proto the board and either make it in-house or have it made at some pcb fab (though they won''t bill you for the waiting time if you are lucky ) , another hour to put the chip in , and countless hours to reverse engineer the protocol and get the data out - probably somewhat corrupted as well.
TLDR : unless you need 64bit variables for your income statement NOT worth it.

If the data stored on the phone is so damn important, why didn't you have a backup of it? Why was the only copy of this data on an easily lost, easily broken, unreliable storage medium in your pocket?
The problem with washing machines is you're not just dealing with water, you have some fairly serious soap too, and this is really what your concern is. Soap is alkaline and corrodes the traces inside the phone. You really need to immediately strip the phone down; rinse the phone thoroughly with distilled water and then dry well for a few days.

You should have just put it in the dryer after its wash
Sent from my Nexus 5 using Tapatalk (the older 4.9.5 not that new 4.10 abomination they released for god knows why reason)

GoneTomorrow said:
If the data stored on the phone is so damn important, why didn't you have a backup of it? Why was the only copy of this data on an easily lost, easily broken, unreliable storage medium in your pocket?
The problem with washing machines is you're not just dealing with water, you have some fairly serious soap too, and this is really what your concern is. Soap is alkaline and corrodes the traces inside the phone. You really need to immediately strip the phone down; rinse the phone thoroughly with distilled water and then dry well for a few days.
Click to expand...
Click to collapse
15 minutes , powered on at first in very conductive water ( soap+dirt+hot water) . It's too late for a rinse since I doubt there will be anything working in that phone anymore. Not to mention the mechanical action . If the battery wasn't in it might have survived , albeit with a lot of possible damage.

Ladies and gentleman. My phone survived.
Just plugged back everything, and it boots up. Thank god man. Now I jsut need to back up everything and extract the data out of it. Yay.
My screen has a new 3d effect tho. Water is inside, LOL. It has some nice blue color. Happy me. Woots.
Thank all of you guys for the possible solutions and feedback! Rock on!!

xIceCream said:
Ladies and gentleman. My phone survived.
Just plugged back everything, and it boots up. Thank god man. Now I jsut need to back up everything and extract the data out of it. Yay.
My screen has a new 3d effect tho. Water is inside, LOL. It has some nice blue color. Happy me. Woots.
Thank all of you guys for the possible solutions and feedback! Rock on!!
Click to expand...
Click to collapse
Considering it was in the washing machine, you didn't remove the battery, attempted to turn it on, then water came out when you finally opened it up..
You're lucky it has any sign of life at all.

Lethargy said:
Considering it was in the washing machine, you didn't remove the battery, attempted to turn it on, then water came out when you finally opened it up..
You're lucky it has any sign of life at all.
Click to expand...
Click to collapse
Yes, I know right!
Took out from w.s, turn it on, screen flashes > dip phone to rice for 8 hours > tried turn it on, nothing happens > remove cover and screws and everything > dry up water > dip to rice for another sweet 15 hours ( working + part time studies ), now reached home, assemble everything, turn it on, and WALLA!
Backing up everything now. :fingers-crossed: :highfive: :laugh: :victory:

xIceCream said:
Backing up everything now. :fingers-crossed: :highfive: :laugh: :victory:
Click to expand...
Click to collapse
I am really happy for you Next time though, set up automated backup options so that you don't have to worry about the data inside the phone.

xIceCream said:
Ladies and gentleman. My phone survived.
Just plugged back everything, and it boots up. Thank god man. Now I jsut need to back up everything and extract the data out of it. Yay.
My screen has a new 3d effect tho. Water is inside, LOL. It has some nice blue color. Happy me. Woots.
Thank all of you guys for the possible solutions and feedback! Rock on!!
Click to expand...
Click to collapse
I'm amazed! I suppose it's possible the water was conductive enough to actually put the battery into protection right away

KreAch3R said:
I am really happy for you Next time though, set up automated backup options so that you don't have to worry about the data inside the phone.
Click to expand...
Click to collapse
Thank you! Yea, will do that next time. Painful lesson to learn! Will note that!
Niflheimer said:
I'm amazed! I suppose it's possible the water was conductive enough to actually put the battery into protection right away
Click to expand...
Click to collapse
Yea. Nexus the magician! But all in all, speaker doesn't work, 3.5mm jack doesn't work. At least all my data are there!

Take a backup and buy a new phone. Lol.
Sent from my Nexus 5 using XDA Free mobile app

Could still fail yet..

Related

[Q] Spilled water on phone. Now "Unable to start wifi" message

Guys, been hanging out here long time now. First incident with about 6 month old captivate. I dropped a glass of water on my captivate yesterday. I immediately removed and took out the battery and wiped it dry. Did not see much of seeped in water so did not do the rice method. Turned on Wi-fi this morning and it says "unable to start wifi". Same with bluetooth.
Call,sms, camera everything works fine. At work, so blew dry the phone and also have kept it next to a warm laptop exhaust. Should I dismantle the phone and try to dry the swb23 chip (wifi/bt) ?
Please help guys !
stock and unrooted captivate
thelastjedi said:
Guys, been hanging out here long time now. First incident with about 6 month old captivate. I dropped a glass of water on my captivate yesterday. I immediately removed and took out the battery and wiped it dry. Did not see much of seeped in water so did not do the rice method. Turned on Wi-fi this morning and it says "unable to start wifi". Same with bluetooth.
Call,sms, camera everything works fine. At work, so blew dry the phone and also have kept it next to a warm laptop exhaust. Should I dismantle the phone and try to dry the swb23 chip (wifi/bt) ?
Please help guys !
stock and unrooted captivate
Click to expand...
Click to collapse
You can't see the water that got inside. Would have been better to do the rice method before switching it back on but you should do it now nonetheless. Just be warned, you may have cooked the WiFi chip already.
Are the moisture indicators clear? If so, you should send it for warranty replacement. If not, then you can resort to opening it up, wiping the traces, etc.
ianwood said:
You can't see the water that got inside. Would have been better to do the rice method before switching it back on but you should do it now nonetheless. Just be warned, you may have cooked the WiFi chip already.
Click to expand...
Click to collapse
Yeah, pretty much ^^
uggg...may be too late. If you get a significant amount of liquid on or in your phone the worst thing you can do is turn it on.
You should have:
1. immediately removed battery and placed on a paper towel.
2. immediately place phone in a bag of rice for a minimum 24 hours if not 48 before ever powering back on.
Still its worth a try....remove battery and leave in rice for 24 hours....try again....maybe it didn't fry anything when you powered it on...but you definitely need to finish getting the moisture out of the inside via the rice absorption.
I had my old tilt in a pocket submerged in a swimming pool for a good 15 minutes before realizing my blunder. When i realizing it i didn't try to turn it back on. Left it in rice for 48 hours and everything work fine (luckily the phone was powered of when i got in the pool so that probably helped avoid anything frying).
Haha, I once accidently dropped my old Samsung Epix in a bucket of water and it still booted up and worked but most of the features are dead but screen and all still works. It looked like it was wrecked. I got it replaced under my insurance which is a good thing.
Lol.....Captain Hindsight......i love South Park.......
Sent from my pocket.
swedishcancerboi said:
Lol.....Captain Hindsight......i love South Park.......
Sent from my pocket.
Click to expand...
Click to collapse
funny
but being aware that you shouldn't turn on an electronic device when it is wet hardly requires hindsight though does it? =)
Thanks guys, I have put my phone in a bowl of rice hoping it will get cured.
If not, will ATT not service my phone under warranty ? I read somewhere that replacing the wifi/bt chip costs $70 with ATT. Has anyone done this here ?
Thanks all for your quick replies ! Much appreciated. I will keep everyone updated on how this issue pans out so it will help someone in the future
Tesist the urge to take out Nd test.....leave at least 24 hours without touching
Sent from my SAMSUNG-SGH-I897 using XDA App
ianwood said:
Are the moisture indicators clear? If so, you should send it for warranty replacement. If not, then you can resort to opening it up, wiping the traces, etc.
Click to expand...
Click to collapse
How do I check for the moisture indicator ? Any easy steps ?
It is the white (or not so white anymore) square in the battery compartment.
bames said:
funny
but being aware that you shouldn't turn on an electronic device when it is wet hardly requires hindsight though does it? =)
Click to expand...
Click to collapse
I just felt like being ornery. I think i read a "you should have....." and it just got me laughing thinking of that episode. No disrespect intended towards anyone.
swedishcancerboi said:
I just felt like being ornery. I think i read a "you should have....." and it just got me laughing thinking of that episode. No disrespect intended towards anyone.
Click to expand...
Click to collapse
i know i thought it as funny haven't seen that episode in a long time...almost as good as towlie
i am just always surprised to see the posts where someone gets there phone wet (washed in laundry, dropped in toilet, spilled significant amount of liquid on it) and the first thing they did was tried to turn it back on almost immediately.
btw if your looking at the moisture indicators for warranty purposes its quite possible you have to completely open the shell. Usually they have one visible without taking the phone apart but its not uncommon to have a secondary marker inside the phone where it would be harder for someone to tamper with. Can anyone confirm where all the cappys markers are?
Been a while since I had mine apart but I don't recall seeing one inside.
newter55 said:
Been a while since I had mine apart but I don't recall seeing one inside.
Click to expand...
Click to collapse
wasn't sure....my Tilt2 had one in the battery compartment and one on the motherboard that could only be seen by opening the casing

[Q] A "washed" through laundry HTC Diamond

Hello,
by a rediculous accident I forgot my HTC Diamond in the pocket of my jeans when running the laundry :-(
Afterwards, I opened the cover, took out the battery and let the phone dry out for 2 days. Now I've put it back together, and connected it to the charger. The "ring" is flashing, so the battery is charging but the phone itself is not starting and the display remains completely black, not even the vibration kick on starting...
Is there anything I could do? Or perhaps there is a chance to get out some photos I have shot earlier, would also be something...
ive heard that taking apart your phone and leaving the parts in rice can help (because the rice absorbs moisture)
Off topic:
I read one Desire went through a washing sequence in a washing machine in Desire spesific forum and now this?
Is this a new hobby? I mean... washing smartphone
darkman088 said:
Or perhaps there is a chance to get out some photos I have shot earlier, would also be something...
Click to expand...
Click to collapse
If the photos are on your micro sd card, you may be able to plug that into an adapter and plug it into your PC and gain access to them that way. Just be sure that micro sd card is thoroughly dry before doing so.
WORKING !!!
Hello,
thanks for the replies... This morning the phone booted!!! I was able to download the photos!!! But the screen has stains, obviously the remaining water.
PLEASE advise on how to dry that thing completely !!!
I think that I'm gonna pass on the rice thing.
@aaa - YOU ARE A JUNKA$$ !!! You think that's really funny?!? Especially when I'm currently TIGHT on budget and need the money for other things and the next phone is planned no earlier than Christmas... I'm hesitating whether you're a real human being...
You can dry it completely in an oven for three hours at thirty degrees or so. I've done this three times. If you have a fan forced oven, just turn the fans on, that'll be enough.
A safer way (if you can obtain it) is to leave the phone for 24 hours in a bowl of dessicant silica gel. You'll often get a small packet of silica gel when buying new electronics or other moisture-affected things. That small packet is enough, just put it in an airtight bag and leave it for 24 hours.
The next step would be disassembly and a thorough swabbing with denatured alcohol, but that's pretty extreme and only needed when the device isn't booting.
Some LCDs are hard to get moisture out of, some are not. Leaving the phone with the silica gel for longer will have a better effect. As the previous poster mentioned, rice also works (quite well), but takes longer than silica.
Good luck with it!
Another thin that will absorb moisture is common table salt. Take the phone apart very carefully. Remove battery first, make sure you're grounded as well.
Hello everybody.
thanks a lot for the numerous advices...
Unfortunately, I have more to report...
The phone dried out and booted 2 or 3 days later, as I said. The stains on the display disappeared as by magic one day later.
Everything was fine for a week until I launched the camera 2 days ago. The backlight of the display went off and came back only after removing the batter for 15 minutes.
Now the backlight is going off pretty often, sometimes it requires to remove the battery 1-2 times before it starts working again and yesterday it happened that it got activated again when I got a call...
Any ideas please?
And also the phone keeps overheating from time to time without real load (GPS or wi-fi) which dries out the battery. But I had this problem also before the laundry
Sounds like that moisture in the LCD unit left a bit of residue and is shorting the backlight somewhere.
Only option there would be to disassemble and swab the LCD boards and cables/connectors with denatured alcohol.
Alternatively, a new LCD unit should fix the problem if it persists, just make sure you alcohol swab the connectors before plugging them back in
Someone also mentioned drying out in salt before. While that does work, salt is extremely corrosive on solder and SMCs, so I wouldn't recommend that route.
i heard hair dryers are the bomb at the screen moisture, just take off all that you can and blow dry it.
I just don't understand your refusal on using white rice. It have saved countless phones.
Uncooked white rice is VERY mosture negative. Just put layer of rice, put your phone on it, cover it completely with white rice, seal it in. Ziploc could work too.
In a day or two your partially dry phone will be bone-dry. If it was soaked still you could first try to shake out water as much as can, soak it in distilled water to remove minerals, then white rice it for 3 to 5 days.
I had this problem with my Touch Diamond. Everything worked, but while i was trying to dry it I broke one of the battery "hinges" but the phone still worked after except only with black screen. The best thing to do probably is just leave it for a couple of days and hopefully your phone will be back!
XXCoder said:
I just don't understand your refusal on using white rice. It have saved countless phones.
Uncooked white rice is VERY mosture negative. Just put layer of rice, put your phone on it, cover it completely with white rice, seal it in. Ziploc could work too.
In a day or two your partially dry phone will be bone-dry. If it was soaked still you could first try to shake out water as much as can, soak it in distilled water to remove minerals, then white rice it for 3 to 5 days.
Click to expand...
Click to collapse
exactly what ive said. ive read everywhere that rice is one of the best solutions out there
Like was said before you most likely have some corrosion on a few contacts, if you have about 6 bucks you can spare you can get residue free contact cleaner in an aerosol at radio shack or any electronics store and save yourself having to scrub each contact and connector. Just tear the phone down down spray all the contacts and connectors with contact cleaner let it sit for a few then spray it down with air duster to get any thats get under the resistors, in the connectors, etc that hasn't dried; let it sit till you're positive everythings dry and put it back together. Does the same thing as alcohol just alot less scrubbing.
Sent from my i897 w/Andromeda 3, Suckerpunch kernel, & 1.3Ghz OC using Tegrak.
Hello,
thanks for narrowing the problem down.
But for me it looks like something different, because:
1) I have been using the phone for 1 week without any problems and it got screwed after I've launched the camera app for the first time
2) The backlight works when I power on the phone. But its stop is event-triggered, like when I launch the sound or video player or when I get a call... Similar events would trigger the backlight back on.
Perhaps reflashing the software could fix that?
I went to a shop today and put another battery. The phone booted, anyway without any backlight, twice...
At least the device is still alive.
There probably was a tiny water bubble and it messed with phone when you turned camera on.
darkman088 said:
Hello,
thanks for narrowing the problem down.
But for me it looks like something different, because:
1) I have been using the phone for 1 week without any problems and it got screwed after I've launched the camera app for the first time
2) The backlight works when I power on the phone. But its stop is event-triggered, like when I launch the sound or video player or when I get a call... Similar events would trigger the backlight back on.
Perhaps reflashing the software could fix that?
I went to a shop today and put another battery. The phone booted, anyway without any backlight, twice...
At least the device is still alive.
Click to expand...
Click to collapse
remove the back cover and battery from the phone, and put everyting in a bowl of rice for a day,. should fix everything,
XXCoder said:
There probably was a tiny water bubble and it messed with phone when you turned camera on.
Click to expand...
Click to collapse
Either that or a short in the cameras circuit from corrosion, either way i'd pull it apart before it gets worse and check it out.
Sent from my i897 w/Andromeda 3, Suckerpunch kernel, & 1.3Ghz OC using Tegrak.

Water Damaged AT&T LG G2 D800

Hi guys. Today I made the mistake of dropping my AT&T LG G2 D800 into the toilet.
I promptly removed the phone from the toilet, it was submerged for about 2-3 seconds. The phone stayed on for a few seconds but then froze and powered off. I disassembled it as quickly as possible (accidentally cracking the back cover in the process), and put the disassembled pieces in a large container of rice.
I'm wondering if you guys have any suggestions, and was also wondering how the battery can be completely removed.
I've also taken a photo of what looks like some sort of corrosion/damage on the logic board - if it helps. Otherwise, I don't see anything that looks damaged electronically anywhere else on the phone.
Any ideas or assistance would be appreciated, thank you!
First off, I'm sorry to hear about your loss I once gave my sister her first smartphone and she dropped it in the toilet as well good thing it wasn't a G2. The battery is hard to remove due to its design. They utilized all the space they could, so you have to remove some parts from the phone to be able to pull out the battery. Keep it in rice for a few days, reassemble and try your luck. Put the rest of the device in rice too, to ensure that all water has been drained.
Sent from my LG-D802 using XDA Premium 4 mobile app
Dropped in a basin of water
It's my usual practice to bring with me my g2 in the bathroom. I dropped it, I dont know how, in a basin of water, a little fortunate than the toilet bowl. I was able to touch the screen coz I want to turn it off. But it just suddenly did not work. So, I gave up and left it in sunlight in the living room. The next day I tried to turn it on. Led turned on then dead again. I gave up again and just left it somewhere. After two days, I, out of habit, took it where I left it and turned it on. Viola! It turned on! What I did, I turned it off and charged it full. Now, to make sure, I put it inside our rice dispenser. I'll try to turn it on again tomorrow. Fingers crossed.
faithraze said:
It's my usual practice to bring with me my g2 in the bathroom. I dropped it, I dont know how, in a basin of water, a little fortunate than the toilet bowl. I was able to touch the screen coz I want to turn it off. But it just suddenly did not work. So, I gave up and left it in sunlight in the living room. The next day I tried to turn it on. Led turned on then dead again. I gave up again and just left it somewhere. After two days, I, out of habit, took it where I left it and turned it on. Viola! It turned on! What I did, I turned it off and charged it full. Now, to make sure, I put it inside our rice dispenser. I'll try to turn it on again tomorrow. Fingers crossed.
Click to expand...
Click to collapse
Your best bet friend, is or was to turn off immediately and tear it down pull battery and hit with a dry chem spray heavily. Well not too heavy but then after that hair dry. Rice works in time but not many people will tell you rice can leave a starch film inside of your internals leaving you in a bad way if ever it was heated to liquify the starch. It will coat the internals and youll never get it working again. Though rare. It happens. Try to get a can of water erase. Or canned evaporater. I use it on repairs and have had many positive outcomes. When pulling battery on the devices especially lg be careful of the older nexus 4 and older devices as their internal battery flex terminals with pull right out.
Anyway. Hope you get it working bro. Peace
Sent from my LG-D800 using XDA Free mobile app
Droid2drummer said:
Your best bet friend, is or was to turn off immediately and tear it down pull battery and hit with a dry chem spray heavily. Well not too heavy but then after that hair dry. Rice works in time but not many people will tell you rice can leave a starch film inside of your internals leaving you in a bad way if ever it was heated to liquify the starch. It will coat the internals and youll never get it working again. Though rare. It happens. Try to get a can of water erase. Or canned evaporater. I use it on repairs and have had many positive outcomes. When pulling battery on the devices especially lg be careful of the older nexus 4 and older devices as their internal battery flex terminals with pull right out.
Anyway. Hope you get it working bro. Peace
Sent from my LG-D800 using XDA Free mobile app
Click to expand...
Click to collapse
The thing is, d802's battery is not removable and I dont have the tools to remove the back cover. No service center here too. Luckily, my mighty G2 is working perfectly now.

[Q] Nexus 5 exposed to water

Hello Guys
A while ago i received my N5 and i really enjoyed it! 2 days, i drop the thing in the toilet. :crying:
Okay so my insurance wont cover it and the phone has dryed in Rice and i followed all the advices that were online.
Tho i couldnt remove the batteri and i know this is a crucial point since the current+water will destroy the circuits.
Now my phone either wont start, or sometimes it will try to boot showing the google logo and then crashing (it cant enter the OS).
Is it worth trying to repair the thing? I dont think it will be a problem for me to change a circuit board og replace another part, but since i dont have any experience with phones i dont know what part i should start with.
The phone costs 580 dollars here in Denmark where i live.
Is it worth it ?
Regards Jesper
You can open it up, get some rubbing alcohol and submerge the board into the rubbing alcohol. Use a soft tooth brush and scrub the board. Usually the board gets corrosion/dirt from the water. Once thoroughly clean put a blow dryer to it (use medium to no heat. DO NOT PUT THE BATTERY IN THE ALCOHOL. ONLY THE BOARD!
I've tried this before and it worked like a charm when my Galaxy Nexus had water damage.
Sent from my Nexus 5 using XDA Premium 4 mobile app
OuncE718 said:
You can open it up, get some rubbing alcohol and submerge the board into the rubbing alcohol. Use a soft tooth brush and scrub the board. Usually the board gets corrosion/dirt from the water. Once thoroughly clean put a blow dryer to it (use medium to no heat. DO NOT PUT THE BATTERY IN THE ALCOHOL. ONLY THE BOARD!
I've tried this before and it worked like a charm when my Galaxy Nexus had water damage.
Sent from my Nexus 5 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks ! I will grab a repar kit tomorrow and then try what you suggested! sounds like a good idea.
regards
---------- Post added at 12:18 PM ---------- Previous post was at 12:16 PM ----------
ProfessorJ said:
Thanks ! I will grab a repar kit tomorrow and then try what you suggested! sounds like a good idea.
regards
Click to expand...
Click to collapse
You're welcome. You can watch a few videos on YouTube to see what I mean.
Sent from my Nexus 5 using XDA Premium 4 mobile app
OuncE718 said:
---------- Post added at 12:18 PM ---------- Previous post was at 12:16 PM ----------
You're welcome. You can watch a few videos on YouTube to see what I mean.
Sent from my Nexus 5 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Out of curiosity could you link a video? doesnt have to be the N5 Board
ProfessorJ said:
Hello Guys
A while ago i received my N5 and i really enjoyed it! 2 days, i drop the thing in the toilet. :crying:
Okay so my insurance wont cover it and the phone has dryed in Rice and i followed all the advices that were online.
Tho i couldnt remove the batteri and i know this is a crucial point since the current+water will destroy the circuits.
Now my phone either wont start, or sometimes it will try to boot showing the google logo and then crashing (it cant enter the OS).
Is it worth trying to repair the thing? I dont think it will be a problem for me to change a circuit board og replace another part, but since i dont have any experience with phones i dont know what part i should start with.
The phone costs 580 dollars here in Denmark where i live.
Is it worth it ?
Regards Jesper
Click to expand...
Click to collapse
As soon as you dropped it in water you should have turned it off and left it off for days and possibly even took a hairdryer to it or let it sit in front of the heat vent.
Number one mistake is trying to turn it on. If anybody else drops the nexus in water. Because it has no removable battery cover. Rice won't do the trick. It would take way too long and the water would have already rusted the metal components and trashed all the pop connectors. If you drop the phone is water. Quickly take the entire phone apart. Than put all the pieces in rice. That will allow the rice to actually absorb the left over water. YouTube "nexus 5 tear down". Its always a good thing to know how to do this.
Sent from my Nexus 5 using xda app-developers app
I just finished assembling the Nexus again and im a very happy man!
After disasembling the phone i found that the top board was very teared by the water and it was clear how some of the sockets had poor or no connection.
I used pure alchol (Dunno what its called in english) and a small toothbrush to clean the board. I dryed the board with a hair dryer on cold setting to avoid over heating the CPU parts. Now the phone works! and it doesnt look like it has any pearment faults or flaws. Even the display is normal and all my previous settings and the OS was intact. Thanks for the help everybody! and yes the best thing to do is remove the powersource and dry the boards individually if exposed to water
Best regards Jesper
ProfessorJ said:
I just finished assembling the Nexus again and im a very happy man!
After disasembling the phone i found that the top board was very teared by the water and it was clear how some of the sockets had poor or no connection.
I used pure alchol (Dunno what its called in english) and a small toothbrush to clean the board. I dryed the board with a hair dryer on cold setting to avoid over heating the CPU parts. Now the phone works! and it doesnt look like it has any pearment faults or flaws. Even the display is normal and all my previous settings and the OS was intact. Thanks for the help everybody! and yes the best thing to do is remove the powersource and dry the boards individually if exposed to water
Best regards Jesper
Click to expand...
Click to collapse
Bravo!
Sent from my Nexus 5 using xda app-developers app
ProfessorJ said:
I just finished assembling the Nexus again and im a very happy man!
After disasembling the phone i found that the top board was very teared by the water and it was clear how some of the sockets had poor or no connection.
I used pure alchol (Dunno what its called in english) and a small toothbrush to clean the board. I dryed the board with a hair dryer on cold setting to avoid over heating the CPU parts. Now the phone works! and it doesnt look like it has any pearment faults or flaws. Even the display is normal and all my previous settings and the OS was intact. Thanks for the help everybody! and yes the best thing to do is remove the powersource and dry the boards individually if exposed to water
Best regards Jesper
Click to expand...
Click to collapse
I'm glad I could help. Now please help me and hit the thanks button.
Sent from my Nexus 5 using XDA Premium 4 mobile app
Hey guys. I followed the instructions and have gotten my phone to power. Problem is when it goes from the power up screen that say "Google" to the colored balls, the balls freeze and it goes back to "Google" and freezing there. Any ideas on what I can do to get it to boot?
I just need it to boot long enough to retrieve my pictures and this hot chick's number I got right before the phone was dropped in the pool. Thanks.
edit: When I hold Volume Down/Power, I can get it to the bootloader. Anything I can do from here to salvage my stuff? I'm not familiar with bootloader options. Plugged into my computer, I can hear my PC make the noise as though it's connected which typically then leads to the phone's drive being accessible on the computer however it then immediately makes the noise of the phone being disconnected.
I believe I am having the same problem as you. I briefly dropped it into a creek for no more than a few seconds. That was enough to make the display unresponsive to touch. I was able to power down and quickly did so.
Unfortunately I wasn't near any rice immediately (motorcycle) so I put the phone in my mesh jacket in 100F weather and hoped for the best. I left it off at this point. When I got home I turned it back on (stupid I know) and the N5 didn't boot, only stopped at "Google" boot. I powered down the phone and rebooted, this time it worked. A quick checkup showed the external speaker didn't work for Play music, but did work for T-mobile visual voicemail. Also, the earpiece didn't work when I attempted to make calls.
At this point I realize I probably screwed up the phone big time. Once I realized not all components were working I put the phone in a ziplock bag with brown rice new from the store. I guess I'll let it sit for 48 hours and then attempt again. If it doesn't work, I'll attempt taking the phone apart and cleaning each part. And I'm really only going to attempt that because this phone isn't even paid off!!
These phones need to be made tougher! I am losing hope that there's any chance of my phone surviving at this point.
jaymzb0nd said:
Hey guys. I followed the instructions and have gotten my phone to power. Problem is when it goes from the power up screen that say "Google" to the colored balls, the balls freeze and it goes back to "Google" and freezing there. Any ideas on what I can do to get it to boot?
I just need it to boot long enough to retrieve my pictures and this hot chick's number I got right before the phone was dropped in the pool. Thanks.
edit: When I hold Volume Down/Power, I can get it to the bootloader. Anything I can do from here to salvage my stuff? I'm not familiar with bootloader options. Plugged into my computer, I can hear my PC make the noise as though it's connected which typically then leads to the phone's drive being accessible on the computer however it then immediately makes the noise of the phone being disconnected.
Click to expand...
Click to collapse
Nexus 5 Water damaged
OuncE718 said:
You can open it up, get some rubbing alcohol and submerge the board into the rubbing alcohol. Use a soft tooth brush and scrub the board. Usually the board gets corrosion/dirt from the water. Once thoroughly clean put a blow dryer to it (use medium to no heat. DO NOT PUT THE BATTERY IN THE ALCOHOL. ONLY THE BOARD!
I've tried this before and it worked like a charm when my Galaxy Nexus had water damage.
Sent from my Nexus 5 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I dropped my nexus 5 in the pool while I was on vacation. When i came home i clean all the parts with rubbing alcohol, my phone worked! A day later i tried again but my phone froze on the start-up screen (with the magical floaty balls) and i haven't been able to turn on my phone since i got it to work. What should i do? is it worth saving? PLEASE HELP!!!:crying::crying::crying:
Nexus 5 Water damaged
Hi guyz,
I need some help, lately my nexus 5 was been water damaged. I immediately follow OuncE718 suggestion but I still experiencing problem. When I press on the phone I can feel the vibration but Google-boot logo will not display and it will only display a white-dim light in the bottom part of the screen. I tried to connect it in a Windows computer it will be recognised as a Nexus 5 phone. Does it mean I had to replace my LCD.?
John
Cheers
tolmike23 said:
Hi guyz,
I need some help, lately my nexus 5 was been water damaged. I immediately follow OuncE718 suggestion but I still experiencing problem. When I press on the phone I can feel the vibration but Google-boot logo will not display and it will only display a white-dim light in the bottom part of the screen. I tried to connect it in a Windows computer it will be recognised as a Nexus 5 phone. Does it mean I had to replace my LCD.?
John
Cheers
Click to expand...
Click to collapse
Who knows what damage did the water do? If the corrosion sets in, your device will be hosed for sure.
It's really a fools errand to fix water damaged phones as no one can be sure the extent of the damage.
If you take it to a service centre, they'll most probably replace the lcd + mobo which will cost a bomb.
- Sent from an IceCold Hammerhead!
vin4yak said:
Who knows what damage did the water do? If the corrosion sets in, your device will be hosed for sure.
It's really a fools errand to fix water damaged phones as no one can be sure the extent of the damage.
If you take it to a service centre, they'll most probably replace the lcd + mobo which will cost a bomb.
- Sent from an IceCold Hammerhead!
Click to expand...
Click to collapse
Thanks vin4yak I probably buy a new LCD as I have no choice it is really a bomb!.
tolmike23 said:
Thanks vin4yak I probably buy a new LCD as I have no choice it is really a bomb!.
Click to expand...
Click to collapse
If you buy a new LCD, how will you know the Motherboard still works? Then what if you have to buy new motherboard?
Cut your losses. Replace the whole phone. Then get insurance
This ^
Spending money on a water damaged device is usually money wasted. Cause there's usually more things wrecked you find out along the way.
Save the money to go towards a new device.
I had the same problem, I used all the methods that I've read with no solution, my last hope is that the battery got damaged, is there a chance that maybe the battery is the problem? I can get a replacement for 20 dollars, but what do you think? thanks
saman0suke1 said:
I had the same problem, I used all the methods that I've read with no solution, my last hope is that the battery got damaged, is there a chance that maybe the battery is the problem? I can get a replacement for 20 dollars, but what do you think? thanks
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=56142150

[Q] Possible Dead Nexus 5?

My nexus 5 sat in some ice water for about 1-2 minutes straight. After drying the device with a cloth, I unlocked it and opened up the camera app to take a picture. then locked it again. After a few minutes I needed to unlock it again. After unlocking the screen flashed green and red lines then died. I am not able to boot it up or charge it. Is my phone dead?
Extreme112 said:
My nexus 5 sat in some ice water for about 1-2 minutes straight. After drying the device with a cloth, I unlocked it and opened up the camera app to take a picture. then locked it again. After a few minutes I needed to unlock it again. After unlocking the screen flashed green and red lines then died. I am not able to boot it up or charge it. Is my phone dead?
Click to expand...
Click to collapse
The biggest mistake besides the water exposure was to turn it on right away. On these cases it's recommended to make sure it's well dried.. It was working but you probably produced a short inside and wont turn back on.
Put it in a bowl of Rice for one day or buy a Thirsty Bag to absorb the most moisture possible. Only luck and time can save it but no one can control them.
GUGUITOMTG4 said:
The biggest mistake besides the water exposure was to turn it on right away. On these cases it's recommended to make sure it's well dried.. It was working but you probably produced a short inside and wont turn back on.
Put it in a bowl of Rice for one day or buy a Thirsty Bag to absorb the most moisture possible. Only luck and time can save it but no one can control them.
Click to expand...
Click to collapse
This was the first time I've dropped a phone in water, so I thought everything would be OK if I just dried it up. Hopefully some miracle will make it work. If it doesn't ... Guess I'm getting a red one.
Why do many people feel the need to mess with their phone while taking a dump? I mean are they that addicted that they can't put it down to perform regular bodily functions?
BirchBarlow said:
Why do many people feel the need to mess with their phone while taking a dump? I mean are they that addicted that they can't put it down to perform regular bodily functions?
Click to expand...
Click to collapse
Mine phone got wet due to a loose water bottle in my backpack. But I do know what you're talking an about. I used to take dumps with my xperia ray until it nearly fell in the toilet. I think I'll try repairing my phone first before I get a new one since I've already opened the back anyway. If anyone knows any tips feel free to post. Help would be much appreciated.

Categories

Resources