Hi Moderators (sorry to disturb), I have got the tablet below:
ZTO 9-Inch Android 4.0 8GB Capacitive Multi-Touchscreen Widescreen Internet Tablet 1.2GHz Processor with Built-In Camera White N51.
This tablet is getting positive remarks/reviews in amazon, but I couldn't see any signs of forum through the web. Just to know if something similar can be done for this wonderful tablet. My problem below:
I'm looking for a thread to solve the issue of not starting (stock at the first ZTO logo) after updating gapps. Sorry if I'm in the wrong forum; but I couldn't get information from Google regarding a forum linked to the tablet.
Thanks to redirect if I'm in the wrong way.
Related
Hi guys,
I'm new to the forum. I have a problem with my chinese tablet that I bought some months ago. First of all I've seen everywhere on the net and I've understood that people in some forums are more confused than me. Anyway these are the specifications of my tablet:
CPU: Infotm X210, 1 Ghz
RAM: 512 MB
HDD: 4 GB
Battery: 6400 mha
1 SD slot, 2 USB ports, 1 HDMI, 1 LAN etc.. The charger sayis 9V and the screen resolution should be 1024x600, but I'm not shure. On the box where it arrived it shows the writing 'Superpad with Google', and reports a model: CEMX210. The book of instructions provided with it's probably wrong because it shows the model: PC1002I and some pics of another model with 2 SD slots.
The firmware before installed had the following specifications:
Model number: SAWEE10
Android version: Android2.2_20110430
Build number: FRF85B
I've seen that also that also the carton where it arrived it's wrong because it shows again the damned 2 SD slots. So now formaly I don't know which model I have, I suppose it's a clone. The site where I bought it said it's a Jpad Flytouch 3.
Another thing: before doing some updates it didn't show a wrinting on the startup (except for the two main android ones). Now it shows: Infotmic 0.6.1.5(672), and I imagine that's not a good thing.
Can you help me recovering this bricked tablet ?
brickedtablet said:
Can you help me recovering this bricked tablet ?
Click to expand...
Click to collapse
Welcome, the XDA community is about development. There are several other sites that might be able to specifically address your specific questions and issues.
Posting a message at one of the sites, noted below, more suited to user assistance will probably lead to a quicker resolution. Answers that may apply are already posted! If possible search first.
Your tablet is probably a Fake Flytouch 3 Guide: Superpad III, Jpad Sawee10 Beware.
Here are a couple of support sites with information related to your issue.
Tabletsmania.es - Restoring the Model SAWEE10. (Spanish to English Google Translation)
apad.tv - How i recovered my Sawee/Superpad3
Good luck
Finally I found a solution. Go here to see a complete guide -> windows8(dot)altervista(dot)org.
Hello,
I just ordered the Visture V4HD from Aliexpress and should receive it in a few days.
This will be my first tablet, and I have a very basic understanding of OS and firmware...
I've noticed that the specs of the Cube U9GT5, Chuwi v99 and Visture V4HD are exactly the same. Does this mean the firmware is compatible between them?
I basically gambled on which one to buy and ended up settling for the Visture. The only thing that I fear is that they might slack on the firmware updates.
Is using firmware from one of those other tablets possible in case the people from Visture stop updating the firmware altogether?
Thanks!
PS- I did a previous search on the matter but wasn't able to find the answer.
DanCody said:
Hello,
I just ordered the Visture V4HD from Aliexpress and should receive it in a few days.
This will be my first tablet, and I have a very basic understanding of OS and firmware...
I've noticed that the specs of the Cube U9GT5, Chuwi v99 and Visture V4HD are exactly the same. Does this mean the firmware is compatible between them?
I basically gambled on which one to buy and ended up settling for the Visture. The only thing that I fear is that they might slack on the firmware updates.
Is using firmware from one of those other tablets possible in case the people from Visture stop updating the firmware altogether?
Thanks!
PS- I did a previous search on the matter but wasn't able to find the answer.
Click to expand...
Click to collapse
Yes you can. I have one Chuwi V99 and i'm using the yuandao n90FHD firmware. Chuwi v99, Cube u9gt5, Visture v4hd and yuandao n90fhd thei are all the same tablet, and a few more brands will came.
mml78 said:
Yes you can. I have one Chuwi V99 and i'm using the yuandao n90FHD firmware. Chuwi v99, Cube u9gt5, Visture v4hd and yuandao n90fhd thei are all the same tablet, and a few more brands will came.
Click to expand...
Click to collapse
Thanks!
DanCody said:
Hello,
I just ordered the Visture V4HD from Aliexpress and should receive it in a few days.
This will be my first tablet, and I have a very basic understanding of OS and firmware...
I've noticed that the specs of the Cube U9GT5, Chuwi v99 and Visture V4HD are exactly the same. Does this mean the firmware is compatible between them?
I basically gambled on which one to buy and ended up settling for the Visture. The only thing that I fear is that they might slack on the firmware updates.
Is using firmware from one of those other tablets possible in case the people from Visture stop updating the firmware altogether?
Thanks!
PS- I did a previous search on the matter but wasn't able to find the answer.
Click to expand...
Click to collapse
Is anyone modifying firmwares of these high-res chinese tabs to get more out of it.
Fact is: the producers did not do their very best to implement the latest tweaks etc to their "4.1.1". The most important problem so far is a memory leakage, freezes and an unusably laggyish HD-mode.
We could use some dev-pover on these tabs, They seem nicely built and not too weak if optimized.
Most advanced topic on another forum: http://www.slatedroid.com/topic/394...do-n90fhdcube-u9gtvvisture-4hd-retina-tablet/
A new firmware for Hyundai Play X900 has been released yesterday, it works with the Cube U9GT5 and all compatible tablets.
I made a rooted version here:
http://www.arctablet.com/blog/forum...ted-firmware-from-hyundai-play-x900-20130109/
It's not really smooth yet, but it's better than all other firmwares I tested so far.
so is the CUBE the same as Chuwi V99?
looking to root / install custom bootloader if one exists :good:
Hi .
I have serius problem with my tablet
The problems is with camera when I try to open android camera apps .
Say error "Unfortunately, Gallery has stopped"
I install again latest FW with full swap all data and have the same error .
I try Settings > Apps > All > Gallery > Clear data
But nothing happened
I try with all official roms
I try with Timeless Rom V0004 & Timeless Rom V0005
But nothing happened
I change permissioning on gallery2.app
But nothing happened
ANY H E L P ?
Any fix for the display lag? It's too annoying especially in HD mode! I've tried a couple of ROMs but none seems to fix it! Any advice? Thx!
I just bought this tablet a few days ago. It seems to be pretty new and based on an earlier model (Tab-9701). The '97' refers to the screen size, 9.7 inches and the '02' in the model number refers to having two cameras now instead of only one. It's a bit cheap and nasty but can get me online and take photos when I'm out and about.
Anyway, it has Ice Cream Sandwich installed (Android 4.0.4) and I'd like to upgrade it to Jellybean at least but since it's so new, I don't want to brick it. I can only find two unanswered posts on the XDA forums in relation to the 9701 model and nothing about the 9702, so this is the first. Does anyone have any idea what tablet this thing would be based on, maybe like a Nexus or something? Then I could follow the guide for the similar model and maybe install Jellybean myself, since I have root.
Any help would be appreciated. Here are the specs:
10" Capacitive-Touch IPS LED Display
ARM Cortex A10 1.2Ghz CPU
Memory 1GB DDR3 ## Storage 8GB
Built-in Wifi 802.11 b/g
HDMI port, Integrated Micro-SD Card Reader, micro-USB 2.0
Dual Camera (Front & Rear)
Google Android 4.0 Ice Cream Sandwich OS
Cheers.
Michael.
MarsMichael said:
I just bought this tablet a few days ago. It seems to be pretty new and based on an earlier model (Tab-9701). The '97' refers to the screen size, 9.7 inches and the '02' in the model number refers to having two cameras now instead of only one. It's a bit cheap and nasty but can get me online and take photos when I'm out and about.
Anyway, it has Ice Cream Sandwich installed (Android 4.0.4) and I'd like to upgrade it to Jellybean at least but since it's so new, I don't want to brick it. I can only find two unanswered posts on the XDA forums in relation to the 9701 model and nothing about the 9702, so this is the first. Does anyone have any idea what tablet this thing would be based on, maybe like a Nexus or something? Then I could follow the guide for the similar model and maybe install Jellybean myself, since I have root.
Any help would be appreciated. Here are the specs:
10" Capacitive-Touch IPS LED Display
ARM Cortex A10 1.2Ghz CPU
Memory 1GB DDR3 ## Storage 8GB
Built-in Wifi 802.11 b/g
HDMI port, Integrated Micro-SD Card Reader, micro-USB 2.0
Dual Camera (Front & Rear)
Google Android 4.0 Ice Cream Sandwich OS
Cheers.
Michael.
Click to expand...
Click to collapse
I know it's a bit poor replying to my own thread but I thought I'd post this link in case anyone else is in the same predicament as me, or if they're looking for something of interest. Since the Lenco Tab-9702 is the same as the 9701 apart from the extra camera, here are some links for the Lenco tablets (and others):
http://stlgroup.home.xs4all.nl/Tablets/
Michael.
MarsMichael said:
I know it's a bit poor replying to my own thread but I thought I'd post this link in case anyone else is in the same predicament as me, or if they're looking for something of interest. Since the Lenco Tab-9702 is the same as the 9701 apart from the extra camera, here are some links for the Lenco tablets (and others):
http://stlgroup.home.xs4all.nl/Tablets/
Michael.
Click to expand...
Click to collapse
Oops! Now I've semi bricked this too! I managed to get a vrsion of Clockwork Mod onto it, but the graphics are not very graphic like and I'm stuck on the CMW recovery screen!
Michael.
MarsMichael said:
I know it's a bit poor replying to my own thread but I thought I'd post this link in case anyone else is in the same predicament as me, or if they're looking for something of interest. Since the Lenco Tab-9702 is the same as the 9701 apart from the extra camera, here are some links for the Lenco tablets (and others):
Michael.
Click to expand...
Click to collapse
Michael, i know this post is old but i also have the lenco tab 9702. Can you please tell me how you rooted it?
And if you found any please tell me what rom you used.
Hello.
I have an Unusual 50x smartphone. This is a rather small company from Spain, I suppose they are just rebranding chinese smartphones, and this is why I can't find a rom that would work with it. They do not have a stock rom for this device on their website.
The specifications are:
Mtk6572S_00, 512 mb ram, 5 inch screen.
Even if some rom does start up, the screen is striped, like really, really striped, the phone reacts on swiping, but the screen is unreadable.
Could you point me to a working rom for this device, maybe a stock rom? I've tried the one for Cubot C-11, Unusual 55X, and some chinese mt6572 clones. None of this has worked so far.
Here is a photo of the screen:
Oh, I cannot post links, so just paste it after "imgur.com": d2oebvW
Duplicate please continue here...
http://forum.xda-developers.com/android/help/lk-bin-file-devices-similar-specs-t3221959/
Thread closed.
Sloth
Hi,
This is a plea for help from anyone out there who knows something about the Allwinner 32GB Tablet. I bought one a few years back when 4.4.2 was all the rage, but since then, have pretty much ignored it.
I now find that I have a use for it so I was wondering if it is possible to upgrade the OS on my machine, just to make it a little better at absorbing Apps and making them work - so far, I have not had much luck
in trying to download apps from the Shop. I have a copy of Android Magazine, issue No 45, which showed me how to do the upgrade but unfortunately, nothing it refers to is there any longer, or at least in the form it is shown in the magazine. However, I do see the SDK website, but on it, nothing at all about the Allwinner Android Kitkat or the model number BS1078. The Firmware version is 4.5, and the kernel is 3.3.0, and it has a
Quadcore - A31 Series Processor Type (most of this is double dutch to me, but it may mean something to someone).
Regards to any and all,
Philip.