First let me introduce myself. The name is Darcy and I have been casually using linux and other *nix OS for about a decade. I am in school working on a programing degree ATM, and am a pretty quick study. Anyways, I without much research bought my wife a generic 7" tablet running android 1.6. I know what processor it has and Im hoping that leads me to a place to start. Ok so the device is a "Kasser Net'sGo" we didnt realize that its just a china pad with another companys name on it when we ordered it. So most of the apps dont run correctly, and in general the device sucks(on a software level the HW is fine although generic).
Anyways it apears that i can get into recovery mode to flash if i had no other choices. But since there are no official roms im hoping to find a build thats based on the same CPU or similar hardware to find a starting point. Its running the Marvell Aspen 800mhz chip and standard ddr2. Sadly thats all we have been able to find out about this device.
I have compiled custom builds for linux before, and i have now purchased a Gtab so i have a less garbage device to test some things on(i have allready flashed 2 different roms and fooled with a bunch of the settings). But we would realy like to do something with this other tablet. So if anyone can point me in the direction of some info on how to do android builds or a repository of chipset drivers and such that might help me that would be greatly appreciated.
Greetings,
While I been a tech for 20years supporting the WinTel systems, I am a noob to Android and ROM programming. I needed to be portable, and being unemployed didn't leave many cost-options available. I picked up a China knockoff called the MID M9000 (http://www.ebay.com/itm/330779120701?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649).
What I can confirm on it is that it does run a Cortex A8 (I guess that means it is a AllWinner A10??) running Android ICS 4.04. A look under About Tablet shows Model Number F900, Baseband Version 1.4rc3 Kernel 3.0.8 [email protected] #2 Fir Jul 27 10:27:12 CST 2012 Build Number 20120716-F900.I have some flakiness with the screen, the performance seems poor with alot of waits and do I want to kill the app. I have gone through with Android Assistance and Advanced Task Manager to kill off any background apps, loads, etc. Still no luck.
Funny thing someone dumped in my lap a cheapy Sylvania SYNET7WIC 7" Smartbook with Windows CE 7 this past week. I searched and found you could bootload MODROID (Android 2.2 mod) ROM and I get more responsiveness on that WM8650 CPU than I am getting from this Cortex A8. So I am hoping it is just a bad build, and like the SYNET7WIC be happily surprised with a Mod for my Cortex A8 to improve it as well.
I tried over at CM, but there seems to be no discussion about MID tablets. I found the Christian Troy AllWinner A10 thread (http://forum.xda-developers.com/showthread.php?t=1821398) but as I am not a DEV, I can't post to that thread to ask for help. All feedback or assistance is welcome, especially pointing to the right ROM and other parts I should use (I believe I have the right instructions) on how to do my first reimage to Jelly Bean. Thanks!
This seems to be a F900 tab
nerogoth said:
Greetings,
While I been a tech for 20years supporting the WinTel systems, I am a noob to Android and ROM programming. I needed to be portable, and being unemployed didn't leave many cost-options available. I picked up a China knockoff called the MID M9000 (http://www.ebay.com/itm/330779120701?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649).
What I can confirm on it is that it does run a Cortex A8 (I guess that means it is a AllWinner A10??) running Android ICS 4.04. A look under About Tablet shows Model Number F900, Baseband Version 1.4rc3 Kernel 3.0.8 [email protected] #2 Fir Jul 27 10:27:12 CST 2012 Build Number 20120716-F900.I have some flakiness with the screen, the performance seems poor with alot of waits and do I want to kill the app. I have gone through with Android Assistance and Advanced Task Manager to kill off any background apps, loads, etc. Still no luck.
Funny thing someone dumped in my lap a cheapy Sylvania SYNET7WIC 7" Smartbook with Windows CE 7 this past week. I searched and found you could bootload MODROID (Android 2.2 mod) ROM and I get more responsiveness on that WM8650 CPU than I am getting from this Cortex A8. So I am hoping it is just a bad build, and like the SYNET7WIC be happily surprised with a Mod for my Cortex A8 to improve it as well.
I tried over at CM, but there seems to be no discussion about MID tablets. I found the Christian Troy AllWinner A10 thread (http://forum.xda-developers.com/showthread.php?t=1821398) but as I am not a DEV, I can't post to that thread to ask for help. All feedback or assistance is welcome, especially pointing to the right ROM and other parts I should use (I believe I have the right instructions) on how to do my first reimage to Jelly Bean. Thanks!
Click to expand...
Click to collapse
I think this is a f900 generic chinese tab and a replica of this one http://temtop.en.alibaba.com/produc...13_1_5GHz_Cortex_A8_800_X_480_9_Inch_MID.html
I have the same tab and I was finding it hard to get a stable ROM to replace my factory ROM which had much more serious issues. I used this one on my tab and its been running much better now.
http://www.azhuo.net/en/products_F9...Capacitive_Android_4.0_Tablet_PC_Upgrade.html
Please note I still face issues with slowness and I need to reboot my tab everytime I play a resource intensive app/ game. I think its more to do with the hardware than with the firmware.
nerogoth said:
Greetings,
While I been a tech for 20years supporting the WinTel systems, I am a noob to Android and ROM programming. I needed to be portable, and being unemployed didn't leave many cost-options available. I picked up a China knockoff called the MID M9000 (http://www.ebay.com/itm/330779120701?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649).
What I can confirm on it is that it does run a Cortex A8 (I guess that means it is a AllWinner A10??) running Android ICS 4.04. A look under About Tablet shows Model Number F900, Baseband Version 1.4rc3 Kernel 3.0.8 [email protected] #2 Fir Jul 27 10:27:12 CST 2012 Build Number 20120716-F900.I have some flakiness with the screen, the performance seems poor with alot of waits and do I want to kill the app. I have gone through with Android Assistance and Advanced Task Manager to kill off any background apps, loads, etc. Still no luck.
Funny thing someone dumped in my lap a cheapy Sylvania SYNET7WIC 7" Smartbook with Windows CE 7 this past week. I searched and found you could bootload MODROID (Android 2.2 mod) ROM and I get more responsiveness on that WM8650 CPU than I am getting from this Cortex A8. So I am hoping it is just a bad build, and like the SYNET7WIC be happily surprised with a Mod for my Cortex A8 to improve it as well.
I tried over at CM, but there seems to be no discussion about MID tablets. I found the Christian Troy AllWinner A10 thread (http://forum.xda-developers.com/showthread.php?t=1821398) but as I am not a DEV, I can't post to that thread to ask for help. All feedback or assistance is welcome, especially pointing to the right ROM and other parts I should use (I believe I have the right instructions) on how to do my first reimage to Jelly Bean. Thanks!
Click to expand...
Click to collapse
Recently purchased a similar tablet from http://www.agptek.com/New-Android-4.0-MID-7-inch-Capacitive-TouchScreen-Tablet-458-96-1.html. I flashed Unofficial CyanogenMod 10 for many AllWinner A10 tablets with the MOMO9 compatibility zip; as the MOMO9 specs are identical to my tablet. Running very smooth, alot faster and more stable than the original ICS 4.0.3.
Where did yuo download the rom flash from? How has it been working for you? Are you still running it on 4.0.3, or are you on 4.0.4 now? I just got a Mid M9000 and kinda regretting it now, but if I can flash it, to a better rom, that would be awesome.
Thanks
Tim
MaiPan
Howdy,
Actually I scored instead MaiPan MX913 img file at Maipad dot net . I was reading some reviews because this is a a single core device, and they are now pushing out quad core tablets now, because any attempt with this chipset to do Jelly Bean results in the touch screen stop responding (I have tried three or four already). I think also the problem is how 'low end' the single core is, and is why they are dumping these like crazy.
I have actually seen quite a few posts that some still don't get good ICS response no matter the img file, and so regress back to Froyo with alot of positive results. I dunno if there is a patch with the Froyo to compensate for the changes to Adobe Flash and now the Java scripting changes, if your still not happy with the results from MaiPan.
I was going to sell mine on ebay, but now I might give it a try with the December img at MaiPan and seems to be pretty snappy, but won't replace my laptop where I can open several web pages at the same time I think. I will let you know how the latest image works as I am intending to test this weekend.
nerogoth said:
Howdy,
Actually I scored instead MaiPan MX913 img file at Maipad dot net . I was reading some reviews because this is a a single core device, and they are now pushing out quad core tablets now, because any attempt with this chipset to do Jelly Bean results in the touch screen stop responding (I have tried three or four already). I think also the problem is how 'low end' the single core is, and is why they are dumping these like crazy.
I have actually seen quite a few posts that some still don't get good ICS response no matter the img file, and so regress back to Froyo with alot of positive results. I dunno if there is a patch with the Froyo to compensate for the changes to Adobe Flash and now the Java scripting changes, if your still not happy with the results from MaiPan.
I was going to sell mine on ebay, but now I might give it a try with the December img at MaiPan and seems to be pretty snappy, but won't replace my laptop where I can open several web pages at the same time I think. I will let you know how the latest image works as I am intending to test this weekend.
Click to expand...
Click to collapse
Don't waste your time... I downloaded the 12.1 version of the MX913 (not DC), and now have no touch screen response...
Think I'll try the A10 AllWinner and see if that works.
Thanks
Tim
shankscomp said:
Don't waste your time... I downloaded the 12.1 version of the MX913 (not DC), and now have no touch screen response...
Think I'll try the A10 AllWinner and see if that works.
Thanks
Tim
Click to expand...
Click to collapse
Now I have tablet that boots up with NO touch screen... since I tried the MX913 firmware, I've lost screen responsiveness. I suggest to everyone NOT to buy any tablets from NoMoreRack.com. Their customer service sucks and their tablets are all cheap crap... I think I learned my lesson!
AW: [Q] MID Tablet M9000/F900 (AllWinner A10??)
I buyed such a crap tablet to.......the firmware bricked and then I had to try all of the firmwares which I found at one site.
After 2 weeks of non touchscreen working the last one saved it.......I learned my lesson also from those tablet [email protected]!%
Sent from my HTC EVO 3D GSM using xda premium
gesange said:
I buyed such a crap tablet to.......the firmware bricked and then I had to try all of the firmwares which I found at one site.
After 2 weeks of non touchscreen working the last one saved it.......I learned my lesson also from those tablet [email protected]!%
Sent from my HTC EVO 3D GSM using xda premium
Click to expand...
Click to collapse
Which one saved it? I really don't want to **** around another month with nomorerack.com to send this unit back and get another POS... So, if you could let me know tonight or tomorrow which firmware you used, that would be awesome.
Thanks
Tim
so has anyone found a better stable rom for the M9000?
I also just finished downloaded all m9000 from mid site. They have 4 firmware. M9000a/b/c/d .. I juat use the b. But can get the rear cam working. As originally it was Q station q09-06 somewhat model but similar to m9000. Really upset duh..... sorry for my poor english guys..
Any other recon firmware for this model??
Sent from my GT-I8190N using xda premium
http://www.maixin-china.com/software-download.asp#mx913-dc
MaPan MX913 DC Software 2013.2.21.rar (size: 389 MB)
I used this and I am now back in business
pprice520 said:
so has anyone found a better stable rom for the M9000?
Click to expand...
Click to collapse
Wow. Yes. Maybe. Here is my sad story with a rare happy ending:
I ordered a MID9000 from No More Racks--BIG MISTAKE!--When, a couple of months later, it finally arrived (to my surprise), I set it up and was delighted to find that it actually worked. Up until.....5 weeks later, I left it on the charger overnight and that killed it. It appears these units are susceptible to overcharging. It would not boot past the "android" screen. Well, being an android noob, I was clueless. I finally discovered the Kocaso site that had downloads for the image files. It is here (but seeing I'm a new user I cannot post the link). However, the software that they recommend for installing the firmware did not work on my Windows 7 unit. Further search brought me here (but seeing I'm a new user I cannot post the link but it is on the Tablet Mods site), which clearly explained how to download and use LiveSuit to install firmware from a PC to an android tablet. And so. Back to the mymidpad firmware page! If you check the m9000 firmware, there are 4 possibilities. It says to check your serial number on the back to determine which one to use. Woe is me--my m9000 had no serial number. What the heck did I have? And so, I tried all 4 possibilities. NONE of them worked. They all installed OK, but the touchscreen would not respond. At that point, I was ready to throw the machine in the garbage. But one last chance: I tried to install one of the images given for the M9100 (M9100f), and to my shock, it worked like a charm and my machine is working better than ever. Go figure! I suspect that my M9000 actually is a M9100, at least in part. Who knows. I'm happy, for the time being. The moral is: be careful you don't overcharge these units!
my problem is that the touch stopped working ...
hey I have the same problem and I can not fix !!!! I have the same model. please help !!!!
hi guys
i have recently recieved a old Tablet PC as new toy
Model number UM-A102, Build company unknown...
and these are the spec that was written on the little menu that came in the box
CPU processor speed 1.2GHZ
Memory 4GB-32GB
RAM 512MB-1GB
Tf card 128M-16G
it currently running Android 4.1.2
my question is
dose anyone know where i could find a newer firmware that might work with this unit?
have spent hours online digging but no luck so far
if anyone could point me at an right direction would be very very nice :fingers-crossed:
thanks in advence~
Icarus1314 said:
hi guys
i have recently recieved a old Tablet PC as new toy
Model number UM-A102, Build company unknown...
and these are the spec that was written on the little menu that came in the box
CPU processor speed 1.2GHZ
Memory 4GB-32GB
RAM 512MB-1GB
Tf card 128M-16G
it currently running Android 4.1.2
my question is
dose anyone know where i could find a newer firmware that might work with this unit?
have spent hours online digging but no luck so far
if anyone could point me at an right direction would be very very nice :fingers-crossed:
thanks in advence~
Click to expand...
Click to collapse
Here, found your device :-
http://www.youmi88.com/en/pic_view.asp?id=312
But sadly, you can't do much with it.Since it's a chinese device... There's no support available for it.
I recently bought a phone that I thought was an iPhone 8 plus. Turns out it was a clone, but has the case and 1 button of an iPhone 7 or 8 plus. I am trying to make the best out of a bad situation and put a good OS on it to see if it works better. TWRP seems like my best option (I'm open to other suggestions).
I don't know the manufacturer, but after plugging it into a Win 10 computer I was able to get Keytak 6580_weg_I. From what I understand that means a MT6580 chip, but I think I need to know the manufacturer to chose the right OEM. The phone is sealed and I can't open it to look at the inside for more details. Whats my next step?
I am extremely new to this world and don't know much about how to do any of this. I've done a lot of research but couldn't find any answers. Any support you can offer would be appreciated. Thank you.
So I've made some progress. I've rooted the phone and found that I have 1.5 gb of space, 4xARM Cortex-A7 @ 1.3 Ghz, Revision r0p3 (don't know what that is). Trying to figure out my manufacturer, but have come to a standstill. Any support is appreciated. Thanks.
Good Morning
Please correct me or add to my discussion. I bought a Tronsmart S95 Telos many years back which uses the S905 chip. Its last version of android is 5.1.1., finless 2.0 rom from freaktab. My question is why do android boxes go out of date quickly. The box is currently in a stack of pile of old tech that is ready to be sold off. The hardware is fine, it can run 4k, have plenty of memory, it just the software that goes out of date. Why can't I find or no one will develop a 7.1.2 software for it. Would these chips not support it? Or am I missing something here. It forces me now, that if I want to run 7.1.2 I have to buy something else. Every few years, I have to upgrade to a box that supports updated roms, I recently upgraded to a T95Z which uses a S912 chip. Which I now have that is running the Posion Rom 7.1.2. So if Android 8 or 9 comes out, the T95Z becomes obsolete? The question is why?
Thank you