Related
Hi Guys,
Got a bit of a problem, got a sensation xe and tonight i did the s-off and rooted then tried to put a new rom on but it just bootlooped so went to recovery and did a restore and all was ok,
rooted it again and put the PG58IMG back on did the update then it just went as far as the beats logo and looped.
i tried to get into recovery but it wouldnt go and just kept saying no image or wrong image every time i tried, i read some similar threads to this and so eventually i took out the sd card and then got back into recovery but doing a restore didnt work,
took the sd card out and using the pc deleted the PG58IMG which i thought might be causing the problem, tried recovery and it started again but on rebooting it just bootloops again, can anybody help me?
Need to know exactly what you did at the time of flashing? What steps have you done and what ROM?
Sent from my HTC Sensation 4G XE with Beats Audio using xda premium
start
Ok i followed the guide on here....http://forum.xda-developers.com/showthread.php?t=1192300 got s-off and root.
tried to super cid and couldnt get it done anyway got s-off and rooted put the PG58IMG in root updated and then took it out of root then tried to put the darkforest sensation xe ics 3.2.1 rom on, got bootloop then went to recovery and did a restore, everything was then ok.
Checked the phone and it was unrooted so did another complete backup looked to see what might be wrong and i thought i had put the wrong PG58IMG on so i went and put what i thought was the right PG58IMG on updated it and then rebooted and it went into a bootloop.
Tried to do a recovery but would not allow it it just kept running through "no image" then "wrong image" then "no image" and so on.
Tried to get into recovery but wouldnt move down so after reading a similar thread i pulled the sim and got into recovery selected the first of the two restore options and it was restoring from cwd rebooted and it started on a bootloop again going to the beats logo this time.
Thank for your help btw.
Forgot to add it was the revolution system. Thanks for any help!
highlander1v said:
Ok i followed the guide on here....http://forum.xda-developers.com/showthread.php?t=1192300 got s-off and root.
tried to super cid and couldnt get it done anyway got s-off and rooted put the PG58IMG in root updated and then took it out of root then tried to put the darkforest sensation xe ics 3.2.1 rom on, got bootloop then went to recovery and did a restore, everything was then ok.
Click to expand...
Click to collapse
To install ICS roms you need an additional step. Before installing the rom you should supercid and install the new ICS firmware. You can find the link on the second line of darkforest sensation xe ics 3.2.1.
If don't want to supercid follow the instruction here and download the firmware package for your CID (3.24, revolutionary or normal).
Install the new firmware.
Remove the PG58IMG from your sd card
Install the ICS rom.
highlander1v said:
Checked the phone and it was unrooted so did another complete backup looked to see what might be wrong and i thought i had put the wrong PG58IMG
Click to expand...
Click to collapse
You don't root with PG58IMG, that's for the custom recovery. Have you installed the su-2.3.6.3-ef-signed.zip file from the guide?
Hi, yes i have the su-2.3.6.3-ef-signed.zip installed and have removed the PG58IMG from the sd card, but as i say the thing is just boot looping after the beats logo and i would like to find out the next steps to get things back to normal?
Thanks grandelama can you tell me my next move to get back to normal and out of bootloop?
What ROM do you currently have on your phone that doesn't boot? Stock or Darkforest or something else? I'm not sure what rom you restored from the backup... If you restored the Darkforest rom and didn't install the correct firmware as Grandelama said, it will get stuck in a bootloop. If you did install the firmware, try reinstalling the Darkforest rom.
Otherwise, to get your phone working, just do a full wipe in recovery and try to install any gingerbread based rom, for example Android Revolution HD 3.6.13 from here. It should install fine and get your phone to a working condition. Then you can try to get superCID and install the firmware if you want to use ICS roms.
If you have Clockworkmod working and are going to install custom roms anyway, you don't need to worry about installing the su-2.3.6.3-ef-signed.zip file, since all those custom roms are already rooted.
If you have completed without errors the points 1, 2 and 3 of the guide, and you can use Clockworkmod recovery you are now ready to install any NON ICS rom like Android Revolution HD 3.6.13.
Run the superwipe script in Android revolution HD thread, install the 3.6.13 rom and you should boot up allright
If you want to use an ICS rom your missing a step (new firmware) and you need to follow the instructions I gave you in the last post.
Ok thanks guys, i'll try that and let you know how i get on.
Dr Madman i tried the dark forest rom but it wouldnt load so went into recovery and went back to the original stock gingerbread then thinking i had put the wrong 58img changed it and updated but it just bootloaded so did a cwm restore and it still bootloads.
I'm still not sure just what to do next because i'm afraid i might make things worse.
I went into recovery then to backup and restore and then restore and this time restored the second image that was there in CWM it went thru all the recovery, asked to reboot and when i did it still keeps bootlooping.
Why is CWM not getting me back to stock?
Grandelama i'm certain i did what you suggested in your first post but got bootloop after that and CWM got me back but it hasnt worked this time!
Dr Madman,, i could do a wipedata/factory rest wipe cache partition and install Android Revolution HD 3.6.13 because its on the sd card but to be honest i'm just to frightened to at the moment, basically i wanted to go to restore and have it back as stock but it wont! and now i'm not sure which way to go?
highlander1v said:
Grandelama i'm certain i did what you suggested in your first post but got bootloop after that and CWM got me back but it hasnt worked this time!
Click to expand...
Click to collapse
If you did what I suggested you have installed the 3.24 firmware for ICS roms, am I right?
Can you tell which exact version did you install? Where did you download it from? The one from the Kohr-Ah thread...mike1986's version or what?
If you installed mike1986's version without Supercid first you will bootloop with both ICS and Gingerbread roms.
yes
Yes i am certain i did but not sure which one, heads all over the place with this, anyway i will check and get back to you.
Thanks.
Grandelama i think? this is the one i used......DOWNLOAD 3.24 Revolutionary: http://goo.gl/82UpA
MD5: 74e67609f67c3ad6ab94cdb89f19f2fa
Is there a way to find out for sure for you?
Thanks
Do you still have on your pc the zip package you used? If that's the case you can find the md5 of your file and with that you can know which firmware package you installed.
Maybe it's a stupid question, but can you tell me which is exactly your CID? What is the output you get with "fastboot getvar cid"? Are 100% you sure you installed exactly the firmware package for your CID?
Grandelama, firstly thanks for your help, i have a hero that i have rooted and had at least a dozen different roms on from 1.6 thru to 2.3 never had a problem but its been a while and this xe is it seems more complicated, either that or my brains going (more likely) anyway the CID is HTC--001 and the MID is pg5813001.
I will look and see what i have and let you know.
The phone i take it is not yet bricked??? so i really dont want to do anything to screw that up(unless its too late?)
I ran restore and got back to normal, should have left it at that but didnt and cant understand why it wont work this time, i thought thats what it was for.
Anyway i will get back to you with what info i have and thanks again
no, not now 100 sure!
Htc driver 3.0.0.007
v4.3.233.pub.odex.zip
revolutionary -0.4pre4
su-2.3.63-efgh-
darkforest sensation xe ics 3.2.1
PG58IMG
Android revolution hd sensation 3.6.13
This is what else i have plus i have a xe backup folder on the pc if this is of any use ?
is this what you are asking for?
http://forum.xda-developers.com/attachment.php?attachmentid=874000&stc=1&d=1327610186
highlander1v said:
Grandelama, firstly thanks for your help, i have a hero that i have rooted and had at least a dozen different roms on from 1.6 thru to 2.3 never had a problem but its been a while and this xe is it seems more complicated, either that or my brains going (more likely) anyway the CID is HTC--001 and the MID is pg5813001.
I will look and see what i have and let you know.
The phone i take it is not yet bricked??? so i really dont want to do anything to screw that up(unless its too late?)
I ran restore and got back to normal, should have left it at that but didnt and cant understand why it wont work this time, i thought thats what it was for.
Anyway i will get back to you with what info i have and thanks again
Click to expand...
Click to collapse
Hi,
i had the exact same problem and yesterday i solved it. I tried to flash the latest InsertCoin ICS ROM and failed to first install the new Firmware. When i realized this, i did it but forgot to check the CID, wich was not in the FW-zip.. so.. my phone just bootlooped, came to the splashscreen the rebooted. Your phone is not bricked.
This is what i did to solve it:
First i got Super-CID wich you can read about in this thread: [Guide] to Installing S-off, Unlocking, ClockWork, Root, SuperCID & S-on .. it took me about 30 sec to get Super-CID, its very easy if you just read the text.
Then i flashed the new Firmware (3.24.401.1 RUU) that you can find here [DEV] HTC Sensation & HTC Sensation XE firmware | Partitions Info | [22.01.2012]
After that i just flashed the ROM like before and voila, it worked.
Hope it helped some.
I've a huge problem
I've a Sensation 4g I was on stock ics and i followed the guide to get root, htc dev unlock e CWM... (still s.off) after that I installed 4ext and ARHD 6.7.0.. and everything was fine..
Then i tried to install cyanogenmod 9 which requires CWM again.. so i've installed rom manager and installed cwm through it..
I was stuck on the bootloader image, so i tried to flash back my recovery which of course isn't working because i have CWM now and so i tried to flash back ARHD but it will get untill the beginning when it says "optimizing app" and it restarts and again and again....
Anyway i can fix this problem?? I tried to flash another rom "energy ics" which don't require 4ext.. but i got the same results!!! what should i do?! did i brick my phone?
anyway to install 4ext without having a rom working?
andre_07 said:
I've a huge problem
I've a Sensation 4g I was on stock ics and i followed the guide to get root, htc dev unlock e CWM... (still s.off) after that I installed 4ext and ARHD 6.7.0.. and everything was fine..
Then i tried to install cyanogenmod 9 which requires CWM again.. so i've installed rom manager and installed cwm through it..
I was stuck on the bootloader image, so i tried to flash back my recovery which of course isn't working because i have CWM now and so i tried to flash back ARHD but it will get untill the beginning when it says "optimizing app" and it restarts and again and again....
Anyway i can fix this problem?? I tried to flash another rom "energy ics" which don't require 4ext.. but i got the same results!!! what should i do?! did i brick my phone?
anyway to install 4ext without having a rom working?
Click to expand...
Click to collapse
yes flash recovery using this guide
FLASHING ROMS WITH SON
just follow step 2 from above guide if you are SOFF
if SON follow step 2 and 3
Did you install the correct firmware? ICS based Roms is usually 3.32, firmware ?
Sent from my HTC Sensation 4G using xda premium
realsis said:
Did you install the correct firmware? ICS based Roms is usually 3.32, firmware ?
Sent from my HTC Sensation 4G using xda premium
Click to expand...
Click to collapse
Let's say right now I've a big confusion in my head.. Beore I had ICS working.. i never even tried to downgrade so i should have the correct firmware right?
the last time i check i had 1.32 (and don't remember but it was the last one installed with the tmous OTA)...
Maybe when i did my first format of the sd should i've installed something before the rom?
can anyone giving me the exact path of the cwm backup?
andre_07 said:
can anyone giving me the exact path of the cwm backup?
Click to expand...
Click to collapse
andre read my previous post to flash 4EXT this doesn't require a working rom
also in normal the backups are present on SDCRAD
ie /sdcard/clockworkmod/backup
so once you format the sdcard you will lose the backups
andre_07 said:
Let's say right now I've a big confusion in my head.. Beore I had ICS working.. i never even tried to downgrade so i should have the correct firmware right?
the last time i check i had 1.32 (and don't remember but it was the last one installed with the tmous OTA)...
Maybe when i did my first format of the sd should i've installed something before the rom?
Click to expand...
Click to collapse
If I read this correct you have the official stock firmware that was with the T-Mobile OTA ICS update. This means your bootloader is locked even though you are S-off. You need to flash a engineered Hboot to solve this. Go to this thread to get a firmware package with this. Go to the "User-Friendly Firmware" thread by Kohr-Ah, or you can also use the firmware from GROG88's thread here.
So here's my story...
I unlocked the boot loader of my Sensation 4G, installed CWM recovery, and then flashed the SU zip file to root it.
I did a root check and it conformed that it was rooted.
I also installed Busybox.
After I rooted, I downloaded a few ROMs to try.
I downloaded the Viper ROM and ExtremeSensation ROM.
I dropped both ROM zips onto my SD card.
I then booted into CWM recovery to flash a new ROM to my Sensation.
I backed up my phone before attempting anything via CWM.
After backing up, I selected to install zip from SD and started to install the ROM.
I first tried the Viper ROM (latest).
It went through the install process and then booted.
It then got stuck on the boot screen.
I waited about 20 minutes and then gave up.
I did a full reset again, deleted cache and Dalvik.
I then installed the ROM again.
Once again... stuck on boot animation screen.
I then tried to install the ExtremeSensation ROM. (Its based on CM9)
I did the same procedure and deleted everything and installed the ROM.
It got to the boot screen animation and it stayed stuck on the boot screen animation for over 20 minutes.
It seemed like nothing would install.
I didnt realize that I had to make my Sensation "S-off"... it is still "S-on".
Now I am stuck with no ROMS.
I tried to install a stock rom. It is the 3.33.401.6 ROM.
When I try to install it, the installation aborts. Everytime.
I tried to restore my backup, but it says the MD5 checksum is invalid... looks like my only backup is corrupt.
What can I do to save my phone?
Any help would be SUPER appreciated!
Thanks!
Hi
I am going to assume your hboot is 1.2x.
Try reading THIS THREAD
malybru said:
Hi
I am going to assume your hboot is 1.2x.
Try reading THIS THREAD
Click to expand...
Click to collapse
Sorry, I should have put my hboot version.
It is on 1.27
iomega311 said:
Sorry, I should have put my hboot version.
It is on 1.27
Click to expand...
Click to collapse
Read the guide. Linked by malybru and start fresh again
Sent from my HTC Sensation 4G using xda premium
iomega311 said:
So here's my story...
I unlocked the boot loader of my Sensation 4G, installed CWM recovery, and then flashed the SU zip file to root it.
I did a root check and it conformed that it was rooted.
I also installed Busybox.
After I rooted, I downloaded a few ROMs to try.
I downloaded the Viper ROM and ExtremeSensation ROM.
I dropped both ROM zips onto my SD card.
I then booted into CWM recovery to flash a new ROM to my Sensation.
I backed up my phone before attempting anything via CWM.
After backing up, I selected to install zip from SD and started to install the ROM.
I first tried the Viper ROM (latest).
It went through the install process and then booted.
It then got stuck on the boot screen.
I waited about 20 minutes and then gave up.
I did a full reset again, deleted cache and Dalvik.
I then installed the ROM again.
Once again... stuck on boot animation screen.
I then tried to install the ExtremeSensation ROM. (Its based on CM9)
I did the same procedure and deleted everything and installed the ROM.
It got to the boot screen animation and it stayed stuck on the boot screen animation for over 20 minutes.
It seemed like nothing would install.
I didnt realize that I had to make my Sensation "S-off"... it is still "S-on".
Now I am stuck with no ROMS.
I tried to install a stock rom. It is the 3.33.401.6 ROM.
When I try to install it, the installation aborts. Everytime.
I tried to restore my backup, but it says the MD5 checksum is invalid... looks like my only backup is corrupt.
What can I do to save my phone?
Any help would be SUPER appreciated!
Thanks!
Click to expand...
Click to collapse
When installing new Custom ROMs you should SuperWipe before installing the new ROM. You can find the SuperWipe script in the ARHD thread. Just install zip from SDcard through CWM.
In the Download section of the OP from:
http://forum.xda-developers.com/showthread.php?t=1098849
Yes, S-OFF is a very good thing to have. I assume you have gone through the HTC Dev unlocking tool. There are a few guides on S-OFFing 1.2x.0000 HBOOT phones.
I had a similar issue with MD5 problems when trying to do a CWM recovery. Have you renamed the backup folder, if so you CANNOT have spaces in the new name. Renaming is fine just no spaces. If that's not the problem then sorry I don't know.
i had S-ON and HBoot 1.27.xxx.xxx, and i flashed android revolution, there is a good tutorial on how to flash with s-on
Sent from my HTC Sensation XE with Beats Audio using xda premium
Hello everyone!
As the title said, I got a bootloop after trying to install Android 4.2.1 Jelly Bean.
How I did it:
1. Installed Android 4.2.1 Jelly Bean and Google apps for CyanogedMod 10.1 to my computer and transfered them to my phone's root.
2. Made a backup of the current version.
3. Installed first the ROM and then Google apps.
4. Rebooted my phone and now I got the bootloop.
I know that I didn't wipe data/cache/dalvik cache, that's probably the problem. I tried to resotre the backup I made but I get an error that says "MD5 mismatch!". I've also tried to wipe data/cache/dalvik cache and then install it again, I still get the same problem. The file isn't corrupted because I downloaded it several times and still same problem. I also tried to install it twice in a row but that doesn't work either. I can get into the bootloader and recovery menu.
Phone info:
HTC Desire S
HBOOT-2.00.0002
S-On
Revolutionary CWM v4.0.1.4
I'm pretty new to this so please give easy steps on what I could do.
Thank you!
As your phone is still s-on, you have to flash the boot.img (from the new rom) in fastboot every time you install a new rom.
teadrinker said:
As your phone is still s-on, you have to flash the boot.img (from the new rom) in fastboot every time you install a new rom.
Click to expand...
Click to collapse
Sorry for the noob question, but how do I do that?
EDIT: I forgot to mention that it bootloops on the CyanogenMod picture, not on the one with the HTC logo.
Google it... It has been mentioned innumerable times on this forum....
Tapatalked from Desire S running Andromadus
ipsvtt deciphers
Znipy said:
Sorry for the noob question, but how do I do that?
EDIT: I forgot to mention that it bootloops on the CyanogenMod picture, not on the one with the HTC logo.
Click to expand...
Click to collapse
dude, this is on the FIRST page of General forum
http://forum.xda-developers.com/showthread.php?t=1525100
And your MD5 mismatch almost certainly means that you created the NanDroid backup, then renamed it or moved it.
Everything works perfect now! Thank you!
Hello, long time reader, first time poster. I know about rooting, and installing roms and all that good stuff (had a galaxy s2 but odin bricked it). So I'm new to the sensation, and it's quite different from my previous device. My problem is that when I install a custom rom, the phone will boot and all about after about 30 seconds will freeze and restart.
Okay so these are the steps that I followed:
-Used the KGS Utility and chose "s-off"
-Followed all the prompts everything worked out fine.
-Following that I used it to install a custom recovery.
-Followed the prompts everything worked fine.
-Then I used Revolutionary CWM to flash SuperUser.
-App was there on reboot.
-Then I downloaded the AOKP "Initiate Your Swagger"[4.1.2] Rom
-Put it on my SD card and flashed it (after wiping and backing up)
-When the phone boots the setup wizard starts.
-I follow the prompt and when it gets to "Just a sec" the phone freezes then restarts.
Don't know what the problem is here.
I get the same problem when trying to flash CM10. The phone will boot, but then after 20-30 seconds will reboot.
kojimin said:
Hello, long time reader, first time poster. I know about rooting, and installing roms and all that good stuff (had a galaxy s2 but odin bricked it). So I'm new to the sensation, and it's quite different from my previous device. My problem is that when I install a custom rom, the phone will boot and all about after about 30 seconds will freeze and restart. I also noticed that there is no signal in custom roms either. Don't know what I'm doing wrong here. I used an all in one tool to do s-off, and install a custom recovery. Then I rooted it. Then I started trying to install custom roms but they don't seem to work. What am I doing wrong?
Click to expand...
Click to collapse
Be VERY specific and give a step by step detail of what you are doing to install. Give WAY more detail than you have. And put the detail in a list, not a giant paragraph.
Then we'll look at it and see what's missing.
Skipjacks said:
Be VERY specific and give a step by step detail of what you are doing to install. Give WAY more detail than you have. And put the detail in a list, not a giant paragraph.
Then we'll look at it and see what's missing.
Click to expand...
Click to collapse
Sorry about that. Edited my first post. I hope that is enough.
When you say it boots for 20 seconds, what exaclty for you mean.
Does it just replay the boot animation over and over? Or does it actually bring you to a home screen with the status bar and everything for 20 seconds before the reboot? That's a very important difference in diagnosing this one.
Also try installing 4EXT recovery. CWM has been known to cause weirdness with AOSP roms. Plus you may have an older version of CWM thatcan't properly install the newer roms. If you used a .zip in bootloader to flash CWM yuou probably had an older version. I have a special place in my heart for CWM too, but 4EXT is just so much better for the Sensation. (Different recoveries ar ebetter or worse on different devices.)
If you properly installed superuser on your stock rom that you have a nandroid backup for, installing 4EXT is super easy. Just restore the nandroid, which should boot up without problems, download the 4EXT app from the play store, and use the app to install teh latest version of the recovery. No need for ADB or flashing in bootloader. Then try a full wipe and fresh install of AOKP from 4EXT.
Skipjacks said:
When you say it boots for 20 seconds, what exaclty for you mean.
Does it just replay the boot animation over and over? Or does it actually bring you to a home screen with the status bar and everything for 20 seconds before the reboot? That's a very important difference in diagnosing this one.
Also try installing 4EXT recovery. CWM has been known to cause weirdness with AOSP roms. Plus you may have an older version of CWM thatcan't properly install the newer roms. If you used a .zip in bootloader to flash CWM yuou probably had an older version. I have a special place in my heart for CWM too, but 4EXT is just so much better for the Sensation. (Different recoveries ar ebetter or worse on different devices.)
If you properly installed superuser on your stock rom that you have a nandroid backup for, installing 4EXT is super easy. Just restore the nandroid, which should boot up without problems, download the 4EXT app from the play store, and use the app to install teh latest version of the recovery. No need for ADB or flashing in bootloader. Then try a full wipe and fresh install of AOKP from 4EXT.
Click to expand...
Click to collapse
It boots up to the homescreen (with no signal) then it reboots.
I will try 4EXT and post my results. Thanks for your help thus far!
EDIT: Tryed installing 4EXT now when I try to boot into recovery it shows the HTC spash screen, then it reboots back the homescreen. So I think my recovery is gone.
EDIT 2: So I got the 4EXT recovery installed. But the ROMs are giving me the same issues (no change). I also noticed as before, when the custom roms boot there isn't any cellular signal.
kojimin said:
It boots up to the homescreen (with no signal) then it reboots.
I will try 4EXT and post my results. Thanks for your help thus far!
EDIT: Tryed installing 4EXT now when I try to boot into recovery it shows the HTC spash screen, then it reboots back the homescreen. So I think my recovery is gone.
EDIT 2: So I got the 4EXT recovery installed. But the ROMs are giving me the same issues (no change). I also noticed as before, when the custom roms boot there isn't any cellular signal.
Click to expand...
Click to collapse
Update the firmware.. You are on gingerbread firmware (revolutionary soff worked for you means you are on GB) and it won't work on ics/jb roms
Check the firmware thread by kohr-ah in sensation development section and flash universal 3.33 firmware
It will solve your rom problems
Sent from my HTC Sensation 4G using xda premium
ganeshp said:
Update the firmware.. You are on gingerbread firmware (revolutionary soff worked for you means you are on GB) and it won't work on ics/jb roms
Check the firmware thread by kohr-ah in sensation development section and flash universal 3.33 firmware
It will solve your rom problems
Sent from my HTC Sensation 4G using xda premium
Click to expand...
Click to collapse
it was the firmware! I just updated to 3.33, and 4.1.2 "Initiate your swagger" booted up completely. Thanks for your help :good:
Awesome reply mate :
Sent from my HTC Sensation XE with Beats Audio using xda premium