[Q] recovery - HTC Sensation

Hi Guys,
Got a bit of a problem, got a sensation xe and tonight i did the s-off and rooted then tried to put a new rom on but it just bootlooped so went to recovery and did a restore and all was ok,
rooted it again and put the PG58IMG back on did the update then it just went as far as the beats logo and looped.
i tried to get into recovery but it wouldnt go and just kept saying no image or wrong image every time i tried, i read some similar threads to this and so eventually i took out the sd card and then got back into recovery but doing a restore didnt work,
took the sd card out and using the pc deleted the PG58IMG which i thought might be causing the problem, tried recovery and it started again but on rebooting it just bootloops again, can anybody help me?

Need to know exactly what you did at the time of flashing? What steps have you done and what ROM?
Sent from my HTC Sensation 4G XE with Beats Audio using xda premium

start
Ok i followed the guide on here....http://forum.xda-developers.com/showthread.php?t=1192300 got s-off and root.
tried to super cid and couldnt get it done anyway got s-off and rooted put the PG58IMG in root updated and then took it out of root then tried to put the darkforest sensation xe ics 3.2.1 rom on, got bootloop then went to recovery and did a restore, everything was then ok.
Checked the phone and it was unrooted so did another complete backup looked to see what might be wrong and i thought i had put the wrong PG58IMG on so i went and put what i thought was the right PG58IMG on updated it and then rebooted and it went into a bootloop.
Tried to do a recovery but would not allow it it just kept running through "no image" then "wrong image" then "no image" and so on.
Tried to get into recovery but wouldnt move down so after reading a similar thread i pulled the sim and got into recovery selected the first of the two restore options and it was restoring from cwd rebooted and it started on a bootloop again going to the beats logo this time.
Thank for your help btw.

Forgot to add it was the revolution system. Thanks for any help!

highlander1v said:
Ok i followed the guide on here....http://forum.xda-developers.com/showthread.php?t=1192300 got s-off and root.
tried to super cid and couldnt get it done anyway got s-off and rooted put the PG58IMG in root updated and then took it out of root then tried to put the darkforest sensation xe ics 3.2.1 rom on, got bootloop then went to recovery and did a restore, everything was then ok.
Click to expand...
Click to collapse
To install ICS roms you need an additional step. Before installing the rom you should supercid and install the new ICS firmware. You can find the link on the second line of darkforest sensation xe ics 3.2.1.
If don't want to supercid follow the instruction here and download the firmware package for your CID (3.24, revolutionary or normal).
Install the new firmware.
Remove the PG58IMG from your sd card
Install the ICS rom.
highlander1v said:
Checked the phone and it was unrooted so did another complete backup looked to see what might be wrong and i thought i had put the wrong PG58IMG
Click to expand...
Click to collapse
You don't root with PG58IMG, that's for the custom recovery. Have you installed the su-2.3.6.3-ef-signed.zip file from the guide?

Hi, yes i have the su-2.3.6.3-ef-signed.zip installed and have removed the PG58IMG from the sd card, but as i say the thing is just boot looping after the beats logo and i would like to find out the next steps to get things back to normal?

Thanks grandelama can you tell me my next move to get back to normal and out of bootloop?

What ROM do you currently have on your phone that doesn't boot? Stock or Darkforest or something else? I'm not sure what rom you restored from the backup... If you restored the Darkforest rom and didn't install the correct firmware as Grandelama said, it will get stuck in a bootloop. If you did install the firmware, try reinstalling the Darkforest rom.
Otherwise, to get your phone working, just do a full wipe in recovery and try to install any gingerbread based rom, for example Android Revolution HD 3.6.13 from here. It should install fine and get your phone to a working condition. Then you can try to get superCID and install the firmware if you want to use ICS roms.
If you have Clockworkmod working and are going to install custom roms anyway, you don't need to worry about installing the su-2.3.6.3-ef-signed.zip file, since all those custom roms are already rooted.

If you have completed without errors the points 1, 2 and 3 of the guide, and you can use Clockworkmod recovery you are now ready to install any NON ICS rom like Android Revolution HD 3.6.13.
Run the superwipe script in Android revolution HD thread, install the 3.6.13 rom and you should boot up allright
If you want to use an ICS rom your missing a step (new firmware) and you need to follow the instructions I gave you in the last post.

Ok thanks guys, i'll try that and let you know how i get on.

Dr Madman i tried the dark forest rom but it wouldnt load so went into recovery and went back to the original stock gingerbread then thinking i had put the wrong 58img changed it and updated but it just bootloaded so did a cwm restore and it still bootloads.

I'm still not sure just what to do next because i'm afraid i might make things worse.
I went into recovery then to backup and restore and then restore and this time restored the second image that was there in CWM it went thru all the recovery, asked to reboot and when i did it still keeps bootlooping.
Why is CWM not getting me back to stock?
Grandelama i'm certain i did what you suggested in your first post but got bootloop after that and CWM got me back but it hasnt worked this time!
Dr Madman,, i could do a wipedata/factory rest wipe cache partition and install Android Revolution HD 3.6.13 because its on the sd card but to be honest i'm just to frightened to at the moment, basically i wanted to go to restore and have it back as stock but it wont! and now i'm not sure which way to go?

highlander1v said:
Grandelama i'm certain i did what you suggested in your first post but got bootloop after that and CWM got me back but it hasnt worked this time!
Click to expand...
Click to collapse
If you did what I suggested you have installed the 3.24 firmware for ICS roms, am I right?
Can you tell which exact version did you install? Where did you download it from? The one from the Kohr-Ah thread...mike1986's version or what?
If you installed mike1986's version without Supercid first you will bootloop with both ICS and Gingerbread roms.

yes
Yes i am certain i did but not sure which one, heads all over the place with this, anyway i will check and get back to you.
Thanks.

Grandelama i think? this is the one i used......DOWNLOAD 3.24 Revolutionary: http://goo.gl/82UpA
MD5: 74e67609f67c3ad6ab94cdb89f19f2fa
Is there a way to find out for sure for you?
Thanks

Do you still have on your pc the zip package you used? If that's the case you can find the md5 of your file and with that you can know which firmware package you installed.
Maybe it's a stupid question, but can you tell me which is exactly your CID? What is the output you get with "fastboot getvar cid"? Are 100% you sure you installed exactly the firmware package for your CID?

Grandelama, firstly thanks for your help, i have a hero that i have rooted and had at least a dozen different roms on from 1.6 thru to 2.3 never had a problem but its been a while and this xe is it seems more complicated, either that or my brains going (more likely) anyway the CID is HTC--001 and the MID is pg5813001.
I will look and see what i have and let you know.
The phone i take it is not yet bricked??? so i really dont want to do anything to screw that up(unless its too late?)
I ran restore and got back to normal, should have left it at that but didnt and cant understand why it wont work this time, i thought thats what it was for.
Anyway i will get back to you with what info i have and thanks again

no, not now 100 sure!
Htc driver 3.0.0.007
v4.3.233.pub.odex.zip
revolutionary -0.4pre4
su-2.3.63-efgh-
darkforest sensation xe ics 3.2.1
PG58IMG
Android revolution hd sensation 3.6.13
This is what else i have plus i have a xe backup folder on the pc if this is of any use ?

is this what you are asking for?
http://forum.xda-developers.com/attachment.php?attachmentid=874000&stc=1&d=1327610186

highlander1v said:
Grandelama, firstly thanks for your help, i have a hero that i have rooted and had at least a dozen different roms on from 1.6 thru to 2.3 never had a problem but its been a while and this xe is it seems more complicated, either that or my brains going (more likely) anyway the CID is HTC--001 and the MID is pg5813001.
I will look and see what i have and let you know.
The phone i take it is not yet bricked??? so i really dont want to do anything to screw that up(unless its too late?)
I ran restore and got back to normal, should have left it at that but didnt and cant understand why it wont work this time, i thought thats what it was for.
Anyway i will get back to you with what info i have and thanks again
Click to expand...
Click to collapse
Hi,
i had the exact same problem and yesterday i solved it. I tried to flash the latest InsertCoin ICS ROM and failed to first install the new Firmware. When i realized this, i did it but forgot to check the CID, wich was not in the FW-zip.. so.. my phone just bootlooped, came to the splashscreen the rebooted. Your phone is not bricked.
This is what i did to solve it:
First i got Super-CID wich you can read about in this thread: [Guide] to Installing S-off, Unlocking, ClockWork, Root, SuperCID & S-on .. it took me about 30 sec to get Super-CID, its very easy if you just read the text.
Then i flashed the new Firmware (3.24.401.1 RUU) that you can find here [DEV] HTC Sensation & HTC Sensation XE firmware | Partitions Info | [22.01.2012]
After that i just flashed the ROM like before and voila, it worked.
Hope it helped some.

Related

[Q] [URGENT!] Bootlooping due to flash wrong PG58IMG

Hi all,
I have a problem with my Sensation due to my own fault.
I want to flash ARHD ICS rom to my phone, and I started with rooting my Sensation. I followed all instruction til installing the Recovery (PG58IMG).
I downloaded two versions of PG58IMG (one for ICS and one for the other), but I copied the firmware for ICS version to my SD card and already installed it. Now, my phone already S-off but cannot reboot into homescreen. It keeps rebooting it self in white hTC screen (after I installed the ICS firmware).
I don't know how to fix. I tried to read the troubleshoot in the post but I still cannot fix it. Does anyone have a solution??
Thanks in advance
chuz said:
Hi all,
I have a problem with my Sensation due to my own fault.
I want to flash ARHD ICS rom to my phone, and I started with rooting my Sensation. I followed all instruction til installing the Recovery (PG58IMG).
I downloaded two versions of PG58IMG (one for ICS and one for the other), but I copied the firmware for ICS version to my SD card and already installed it. Now, my phone already S-off but cannot reboot into homescreen. It keeps rebooting it self in white hTC screen (after I installed the ICS firmware).
I don't know how to fix. I tried to read the troubleshoot in the post but I still cannot fix it. Does anyone have a solution??
Thanks in advance
Click to expand...
Click to collapse
If I understand you correctly you flashed the firmware upgrade BEFORE you flashed the new ICS rom? If so you'll need to get your sdcard card out (and get your computer to read it) so you can rename the PG85img on your sdcard so you can get back into recovery so you can flash the new ICS rom.
runderekrun said:
If I understand you correctly you flashed the firmware upgrade BEFORE you flashed the new ICS rom? If so you'll need to get your sdcard card out (and get your computer to read it) so you can rename the PG85img on your sdcard so you can get back into recovery so you can flash the new ICS rom.
Click to expand...
Click to collapse
Yes, I flashed the upgraded firmware before not only I flashed ICS rom, but also I get rooted. Now, I can't flash any rom as well as su-2.3.6.1-ef-signed.zip or su-2.3.6.3-efgh-signed.zip.
It still keep bootlooping. I tried to flash the other firmware, but it showed 'CID incorrect'. I don't know how to fix now
Did you check MD5 Sums before you flashed the ROM because it sounds like a bad download so re-download the ROM and reflash
Jonny said:
Did you check MD5 Sums before you flashed the ROM because it sounds like a bad download so re-download the ROM and reflash
Click to expand...
Click to collapse
I did check MD5 sums for all files I downloaded and it is corrected.
Now, I'm curious that whether it is possible to flash the upgraded firmware before being rooted.
And of course you need to be using the right version of the firmware for the rom you want to flash. Mike's latest uses 3.24 per here. http://forum.xda-developers.com/showthread.php?t=1459767
I don't know if you can get into fastboot or not, but you should be able to check the CID of your phone there, and download the right firmware for your phone. If your phone is carrier independent (i.e. didn't get on contract) then the HTC__xxx variety should be good.
airzone said:
And of course you need to be using the right version of the firmware for the rom you want to flash. Mike's latest uses 3.24 per here. http://forum.xda-developers.com/showthread.php?t=1459767
I don't know if you can get into fastboot or not, but you should be able to check the CID of your phone there, and download the right firmware for your phone. If your phone is carrier independent (i.e. didn't get on contract) then the HTC__xxx variety should be good.
Click to expand...
Click to collapse
Thank you so much for your link. I can boot my Sensation into the homescreen now. For my problem, I have to download and flash the older version (3.17) to fix it.
Thanks all of you for your reply again.
+1 for me, solve with a new download .
Just flash the Mod, the bootloop is normal.
I got the same problem, before i flashed Revolution Rom i used that radio package. After the radio package flash, my phone wass stuck in a bootloop.
I took the memory card out en removed the zip file en flashed the revolution rom. After that my phone started normal.
SOrry for the bad enlgish.
Good luck mate.
hey, guys i just had the same problem, kinda. lol
anyways my phone is rooted, s-off and superCID
when i went to install the new ics rom i did everything this thread http://forum.xda-developers.com/showthread.php?t=1459767
said to do and when the new root booted up for the first time, it would go up to the beats audio logo,( the ics rom with beats audio (xe)) then like restart back to the htc startup logo, then beats again then htc again, it just kept doing this..??
so i just deleated everything and restored back to origional backup rom.
so what did i do wrong?
a bad download link/file? can u give me a good one?
thanks, any help is greatly appreciated as iam totally lost right now...
edit:
also do i even need this file (PG58IMG.zip.) to flash the ics rom if my phone is superCID ??? iam confused on that part.
nevermind, figured it out and got it work! the new ics is pretty sweet!!
thanks for everything- towards all the developers and testers on here
Cool. The answer is yes of course. The firmware file contains a specific radio / hboot / etc version. The ROM you download and install is dependent on certain combinations of the firmware versions you have. The super cid just allows you to flash any of the firmwares available here... Otherwise you have to find the specific one for your region and/or carrier.
Also, don't forget you can use an adb logcat while your phone is booting to see if you can diagnose any boot-looping issues. Just run that command on your PC with your phone attached via USB cable
Kawirider594 said:
hey, guys i just had the same problem, kinda. lol
anyways my phone is rooted, s-off and superCID
when i went to install the new ics rom i did everything this thread http://forum.xda-developers.com/showthread.php?t=1459767
said to do and when the new root booted up for the first time, it would go up to the beats audio logo,( the ics rom with beats audio (xe)) then like restart back to the htc startup logo, then beats again then htc again, it just kept doing this..??
so i just deleated everything and restored back to origional backup rom.
so what did i do wrong?
a bad download link/file? can u give me a good one?
thanks, any help is greatly appreciated as iam totally lost right now...
edit:
also do i even need this file (PG58IMG.zip.) to flash the ics rom if my phone is superCID ??? iam confused on that part.
Click to expand...
Click to collapse
To do so,
1. Download the correct firmware version ( PG58IMG.zip V3.24 ) and copy it to the root of your SDCARD.
Be 200% sure that the downloaded zip file is not corrupted. ( Check the MD5 checksum after you download)
2. Pull Back the battery and wait for a minute.
3. Put the battery and press POWER+VOLUME Down Key together.
4. Your phone will detect the firmware.
5. Follow the screen and complete the flashing.
6. Download the ICS based ROM of your favor.
7. Boot into recovery and flash your rom.
Kawirider594 said:
hey, guys i just had the same problem, kinda. lol
anyways my phone is rooted, s-off and superCID
when i went to install the new ics rom i did everything this thread http://forum.xda-developers.com/showthread.php?t=1459767
said to do and when the new root booted up for the first time, it would go up to the beats audio logo,( the ics rom with beats audio (xe)) then like restart back to the htc startup logo, then beats again then htc again, it just kept doing this..??
so i just deleated everything and restored back to origional backup rom.
so what did i do wrong?
a bad download link/file? can u give me a good one?
thanks, any help is greatly appreciated as iam totally lost right now...
edit:
also do i even need this file (PG58IMG.zip.) to flash the ics rom if my phone is superCID ??? iam confused on that part.
Click to expand...
Click to collapse
No you didn't do everything the thread said to do because you're stuck in a bootloop. And yes, you must have correct firmware to run any ICS ROM.
1. SuperCID.
2. Load correct firmware for ROM version you wish to flash (there are 3 different firmwares, 3.06, 3.12 and 3.24. Make sure you've got the right one.
Put PG58IMG.zip on the root of your damn SD card.
Put the ROM you want on the root of your damn SD card.
Put a wipe or superwipe script on the root of your damn SD card.
So far it's easy, no?
Boot to bootloader, select FASTBOOT, select yes to update.
Watch the phone. You should see it flash some partitions, reboot itself, then flash the radio and some other crap.
When done you should be at correct HBOOT and radio.
Now, pull the battery. Pull the SD card.
Insert the battery. Start the phone with power + Volume down.
Move cursor to recovery.
Insert SD card and select recovery.
Flash the wipe script, flash the ROM.
Now if you did everything exactly like this, you will boot to normal phone in about 10 minutes or so.
This has been spelled out 50 times in 50 threads, including threads devoted to nothing but this procedure.
Your phone is a machine. It can only do what you tell it to do. If you screw up, it's screwed up. If you do everything exactly right, in the right order, carefully checking each step, your phone will behave.
Try again.
Do it right. Do it carefully.
P.

Stuck at "optimizing android app"

I've a huge problem
I've a Sensation 4g I was on stock ics and i followed the guide to get root, htc dev unlock e CWM... (still s.off) after that I installed 4ext and ARHD 6.7.0.. and everything was fine..
Then i tried to install cyanogenmod 9 which requires CWM again.. so i've installed rom manager and installed cwm through it..
I was stuck on the bootloader image, so i tried to flash back my recovery which of course isn't working because i have CWM now and so i tried to flash back ARHD but it will get untill the beginning when it says "optimizing app" and it restarts and again and again....
Anyway i can fix this problem?? I tried to flash another rom "energy ics" which don't require 4ext.. but i got the same results!!! what should i do?! did i brick my phone?
anyway to install 4ext without having a rom working?
andre_07 said:
I've a huge problem
I've a Sensation 4g I was on stock ics and i followed the guide to get root, htc dev unlock e CWM... (still s.off) after that I installed 4ext and ARHD 6.7.0.. and everything was fine..
Then i tried to install cyanogenmod 9 which requires CWM again.. so i've installed rom manager and installed cwm through it..
I was stuck on the bootloader image, so i tried to flash back my recovery which of course isn't working because i have CWM now and so i tried to flash back ARHD but it will get untill the beginning when it says "optimizing app" and it restarts and again and again....
Anyway i can fix this problem?? I tried to flash another rom "energy ics" which don't require 4ext.. but i got the same results!!! what should i do?! did i brick my phone?
anyway to install 4ext without having a rom working?
Click to expand...
Click to collapse
yes flash recovery using this guide
FLASHING ROMS WITH SON
just follow step 2 from above guide if you are SOFF
if SON follow step 2 and 3
Did you install the correct firmware? ICS based Roms is usually 3.32, firmware ?
Sent from my HTC Sensation 4G using xda premium
realsis said:
Did you install the correct firmware? ICS based Roms is usually 3.32, firmware ?
Sent from my HTC Sensation 4G using xda premium
Click to expand...
Click to collapse
Let's say right now I've a big confusion in my head.. Beore I had ICS working.. i never even tried to downgrade so i should have the correct firmware right?
the last time i check i had 1.32 (and don't remember but it was the last one installed with the tmous OTA)...
Maybe when i did my first format of the sd should i've installed something before the rom?
can anyone giving me the exact path of the cwm backup?
andre_07 said:
can anyone giving me the exact path of the cwm backup?
Click to expand...
Click to collapse
andre read my previous post to flash 4EXT this doesn't require a working rom
also in normal the backups are present on SDCRAD
ie /sdcard/clockworkmod/backup
so once you format the sdcard you will lose the backups
andre_07 said:
Let's say right now I've a big confusion in my head.. Beore I had ICS working.. i never even tried to downgrade so i should have the correct firmware right?
the last time i check i had 1.32 (and don't remember but it was the last one installed with the tmous OTA)...
Maybe when i did my first format of the sd should i've installed something before the rom?
Click to expand...
Click to collapse
If I read this correct you have the official stock firmware that was with the T-Mobile OTA ICS update. This means your bootloader is locked even though you are S-off. You need to flash a engineered Hboot to solve this. Go to this thread to get a firmware package with this. Go to the "User-Friendly Firmware" thread by Kohr-Ah, or you can also use the firmware from GROG88's thread here.

{HELP} device is keep booting into recovey -- SOLVED --

To the Guru of this forum. After my last rom flashing my device is keeping booting into recovery :crying:. Is it briked ? If so my only hope is the unbricking project ? Thanks in advance.
What recovery are you running?
Can you use the power menu within recovery to boot into bootloader?
Also, please provide as much pertinent info as possible, ie: rom you flashed, firmware, s-off or s-on, locked or unlocked. With your description it's basically like saying, "my car makes a noise all the time. what is causing it?".
Its not bricked.If u can enter recovery
Sent from my HTC sensation
Sorry you are right:
What recovery are you running? 4Ext
Can you use the power menu within recovery to boot into bootloader? yes
The device is HTC unlocked with S-On.
Rom JBMIUI v4.1 2.8.31 R2.
HBOOT 1.27.0000
firmware 3.33.401.6
I've format everything but SD. Restored the most recent back up done today before flashing. Once it reboots HTC logo comes up once, black screen, HTC logo, 4Ext is coming up saying that smartflash it is set to update the boot partition on next system start asking if this should be removed.
I've downloaded and installed again PG58IMG *different files using bootloader
I've founded a 3.33.401.6-Unsecured-Boot.img,+Root+Busybox zip file that can be installed via recovery but it did not help.
At this point I need a bit of help to look into the right direction and I'm not sure that Unbrick_Pyramid is the right way.
Thanks again.
Try turning off smartflash and flash a 3.33 stock rom to see if it will boot.
What was your last working setup, and what were you trying to install?
Sent from my HTC Sensation 4G using Tapatalk 2
Hi. Manage to flash a stock 3.33.
It stopped to reboot straight into recovery.
Sits now on HTC logo now for about 10 mins. I plan to let him run for 1 hr and see what happens.
Was thinking to install CWM on the basis that could be a 4ext recovery issue, toughs?
GROGG88 said:
Try turning off smartflash and flash a 3.33 stock rom to see if it will boot.
What was your last working setup, and what were you trying to install?
Sent from my HTC Sensation 4G using Tapatalk 2
Click to expand...
Click to collapse
If you can install clockworkmod that may help.
Tge device isnt getting the message that it has already booted into recovery once. So something may be jacked up with 4ext.
Clockwork may bypass all that when it doesnt know what to do with that signal to run smartflash.
Worst case scenario...put a full pm58img containing a rom and recovery on the sf card and flash that through bootloader.
You should still be able to get to bootloader as the device looks for that option first.
Sent from my HTC Sensation using xda app-developers app
Hallo. Ok installed CWM. Can please direct me to a full pm58img as you mentioned ? Thx.
Skipjacks said:
If you can install clockworkmod that may help.
Tge device isnt getting the message that it has already booted into recovery once. So something may be jacked up with 4ext.
Clockwork may bypass all that when it doesnt know what to do with that signal to run smartflash.
Worst case scenario...put a full pm58img containing a rom and recovery on the sf card and flash that through bootloader.
You should still be able to get to bootloader as the device looks for that option first.
Sent from my HTC Sensation using xda app-developers app
Click to expand...
Click to collapse
DiscreteTask said:
Hallo. Ok installed CWM. Can please direct me to a full pm58img as you mentioned ? Thx.
Click to expand...
Click to collapse
And did that help? Are you able to get into recovery without errors now? If so you should be able to flash a fresh version of any ROM.
Try that first. Get any ROM. Flash it. See if it boots.
If you have successfully replaced 4EXT I will bet a fresh flash of a ROM will now boot.
Also worth a shot is replacing or upgrading the firmware, as that could be what's sending the phone into recovery on each boot (though this is less likely that 4EXT just being broken)
Flash a firmware PM58IMG like 3.32 or 3.33 and see if that helps.
But for starters, put a fresh ROM on the SD card and flash it with CWM. (BE SURE IT'S A ROM THAT DOESN'T REQUIRE 4EXT!!)
Once you've got it all fixed you can switch back to 4EXT. I have a feeling it was just the copy you were running that got botched. The software itself is solid and stable. A new copy shoudl work fine now.
CWM v5.0.2.0 was installed fine.
3.33 firmware installed once again.
Using this I've installed ROM that I already did in the past w/o luck, they all sit on the HTC logo. Is like the initial boot sequence is broken. Is boot.img part of the firmware or ROM ?
Trying to download some additional ones.
Thanks,
Skipjacks said:
And did that help? Are you able to get into recovery without errors now? If so you should be able to flash a fresh
version of any ROM.
Try that first. Get any ROM. Flash it. See if it boots.
If you have successfully replaced 4EXT I will bet a fresh flash of a ROM will now boot.
Also worth a shot is replacing or upgrading the firmware, as that could be what's sending the phone into recovery on each boot (though this is less likely that 4EXT just being broken)
Flash a firmware PM58IMG like 3.32 or 3.33 and see if that helps.
But for starters, put a fresh ROM on the SD card and flash it with CWM. (BE SURE IT'S A ROM THAT DOESN'T REQUIRE 4EXT!!)
Once you've got it all fixed you can switch back to 4EXT. I have a feeling it was just the copy you were running that got botched. The software itself is solid and stable. A new copy shoudl work fine now.
Click to expand...
Click to collapse
DiscreteTask said:
CWM v5.0.2.0 was installed fine.
3.33 firmware installed once again.
Using this I've installed ROM that I already did in the past w/o luck, they all sit on the HTC logo. Is like the initial boot sequence is broken. Is boot.img part of the firmware or ROM ?
Trying to download some additional ones.
Thanks,
Click to expand...
Click to collapse
The more details you give, the better the answers will be. Don't consider any detail too small.
What do you mean you installed ROM's that you had done in the past? Do you mean you are trying to restore a backup made with 4EXT?
That won't work. You need to flash a fresh version of the ROM after wiping.
Also, CWM won't install some ROM's that you may have used in the past. What ROM are you trying to install?
The HTC logo that first pops up when you hit the power button is part of the firmware.
Make sure you do a full wipe of everything but the SD card from within CWM. Get whatever's causing the problem off that way. Then flash a fresh install of a ROM from scratch.
Hi.
I did not use any backup only fresh ROMs: ARHD, Elegantia, but also stock ROMs I could find.
I've tried also some PG58IMG with ROM included.
Cheers.
Skipjacks said:
The more details you give, the better the answers will be. Don't consider any detail too small.
What do you mean you installed ROM's that you had done in the past? Do you mean you are trying to restore a backup made with 4EXT?
That won't work. You need to flash a fresh version of the ROM after wiping.
Also, CWM won't install some ROM's that you may have used in the past. What ROM are you trying to install?
The HTC logo that first pops up when you hit the power button is part of the firmware.
Make sure you do a full wipe of everything but the SD card from within CWM. Get whatever's causing the problem off that way. Then flash a fresh install of a ROM from scratch.
Click to expand...
Click to collapse
Arhd and elegencia wont work with cwm. So there is your isdue. Try cm9 or 10 to see if you can boot one of those.
Sent from my HTC Sensation using xda app-developers app
Hallo, after trying all option the following did work for me:
- re-lock bootloader via fastboot oem lock
- apply stock ROM founded in this list http://forum.xda-developers.com/showthread.php?t=1074559
- rebooted fine
I guess that HTC RUU had some superpower and erase and installed whatever file(s) were corrupted.
Now I'm on stock 3.6 - fw 3.33.401.106 - radio 11.76A.3504.00UU_11.24A.3504.31_M
HBOOT 1.29 - S-ON - Relocked.
Standard Recovery.
Now I'm reading how to return my device to S-OFF w/o damaging it again.
Many thanks to skipjacks & groog88 :good:
Skipjacks said:
Arhd and elegencia wont work with cwm. So there is your isdue. Try cm9 or 10 to see if you can boot one of those.
Sent from my HTC Sensation using xda app-developers app
Click to expand...
Click to collapse

[Q] HTC Boot Loop and no signal using recovery

Hello All,
I will start this thread with the obligatory "Im new to rooting...." sentence but over the last 2 or so weeks have been doing my research between multiple sites (including this one), getting frustrated at how many "How to...but before you do" guides there are out there adn you tube videos but have finally managed to perm root and S-Off my UK Vodafone HTC Sensation.
I have flashed clockwork recovery without a hitch and managed to download the Cynaogen Rom without to much difficulty.
The problem:
While looking for overclocking ROMs, decided that the Virtuous Sensation ROM might be the one for me.
While doing further research, I discovered that I would need to flash the new PG58IMG.zip Firmware before the ROM would work. To do this, I would potentially be required to SuperCID, which I also did.
SuperCID complete and Firmeware flashed (and then removed from the SD card) I wiped the phone (several times following instructions on this site) and then installed the Virtuous ROM.
Now I get stuck on boot loop with the blue "V" showing for a about a second and then restarting.
Following some further internet checking, I found it may be a bad download of the ROM so downloaded again but the same thing happened. I also downloaded a different Virtuous ROM to confirm it was the Virtuous Sensation ROM that was corrupt but the other ROM got stuck on boot loop, albeit, the blue "V" now shoed for about 5 seconds.
I decided to load a recovery and revert back to the Cynaogen ROM except......sometimes its stuck on boot loop and other times it loads but I have no network coverage.
I have two questions:
Why did the new Virtuous ROM not work with the recommended firmware?
and
How can I restore my phone? I am guessing this problem may be the new firmware but I have read that this one works with Gingerbread and ICS?
Any help would be appreciated...preferably in a non "PHD in IT required" way.
Thanks in advance if anyone can help.
mostly it might be because of Firmware
what firmware you installed (my guess is 3.24 as you said works for both ICS and GB )
but i suggest you to use 3.33 firmware for ICS or above roms and 1.17 For GB roms
here is the firmware thread
OK, just tried flashing the ICS firmware (thanks for reply) from the link you posted, wiped the phone, cache etc and reinstalled ROM.
I get stuck on boot loop but the blue "v" does load for a little longer now.
From doing some more reading I have seen people saying to check MD5 match. Would someone mind explaining what ths is and how to do it?
OK, ignore the MD5 thing, i searched and found and its a match for all downloads.
ROM is an MD5 match also.
Tried all firmware and still stuck on boot loop.....
One thing I have noticed is that when I load usig the vol down + power, it sates that the 58IMG is "no image or wrong image"....could this be anything to do with it?
ssjghost said:
OK, ignore the MD5 thing, i searched and found and its a match for all downloads.
ROM is an MD5 match also.
Tried all firmware and still stuck on boot loop.....
One thing I have noticed is that when I load usig the vol down + power, it sates that the 58IMG is "no image or wrong image"....could this be anything to do with it?
Click to expand...
Click to collapse
That's generic bootloader function... So its common.. The searching for PG58IMG thing...
Now the best and most effective way is to first cleanup everything usig ruu.. Search for "ruu guide and info" thread by kgs1992 in sensation general section... Use that.. Find the proper ruu and flash it.. Check whether the stock rom(ruu) is flashing or not..If flashing then flash custom recovery and flash your custom rom again
Sent from my HTC Sensation using xda premium
Question
I have checked through a few forums and just want to clarify something before I go down the RUU route:
Will flashing the RUU to stock mean I lose S-Off or perm root? You say I will have to flash a custom recovery image again so I guess that means flashing clockworkmod through HBoot but will I then be expected to flash further firmware?
Thanks, Ill give the RUU thing a go.
I tried all the firmware with te Virtuous ROM and nothing worked but then one of the bottom firmware donloads (3.24 I think, cant remember know following multiple downloads) and booted the recovery.
Now I have signal again!
Thanks for advice, I will try the RUU thing....
Cheers
ssjghost said:
Question
I have checked through a few forums and just want to clarify something before I go down the RUU route:
Will flashing the RUU to stock mean I lose S-Off or perm root? You say I will have to flash a custom recovery image again so I guess that means flashing clockworkmod through HBoot but will I then be expected to flash further firmware?
Thanks, Ill give the RUU thing a go.
I tried all the firmware with te Virtuous ROM and nothing worked but then one of the bottom firmware donloads (3.24 I think, cant remember know following multiple downloads) and booted the recovery.
Now I have signal again!
Thanks for advice, I will try the RUU thing....
Cheers
Click to expand...
Click to collapse
RUU means everything to stock except SOFF ..so you would lose custom recovery, perm root .but the best part is as you still have SOFF ..you can just flash a custom recovery again ..and flash su zip for perm root again ..done voila
and SOFF means ..yes you can flash any firmware
Thanks for all you help mate, in the end i found Cyanogen 10 ROM which does everything I want so followed all instructions and works fine now.
Thanks again for being patient with a nub......much appreciated!:laugh::laugh::laugh::laugh:

Phone boots then when an action is taken reboots

I just got this phone and I think I screwed the pooch?
I followed the tutorial for doing S-Off and then rooting and installing CWM which all worked. I created a backup for my Sense OS and then decided it was time to put a new rom on so I copied the .Zip for Cyrogen Mod9 and installed it but when ever I tried unlocking it it would freeze and then reboot so I decided to restore the old one and read more. I read that it needed the right firmware so I updated to 3.33 Universal and then installed Cyrogen Mod9 and now it still has the issue and if I restore the old one it just shows the htc screen then reboots. How can I fix this?
comatosedturtle said:
I just got this phone and I think I screwed the pooch?
I followed the tutorial for doing S-Off and then rooting and installing CWM which all worked. I created a backup for my Sense OS and then decided it was time to put a new rom on so I copied the .Zip for Cyrogen Mod9 and installed it but when ever I tried unlocking it it would freeze and then reboot so I decided to restore the old one and read more. I read that it needed the right firmware so I updated to 3.33 Universal and then installed Cyrogen Mod9 and now it still has the issue and if I restore the old one it just shows the htc screen then reboots. How can I fix this?
Click to expand...
Click to collapse
i think you have to install gapps first and then cyanogenmod9 rom
comatosedturtle said:
I just got this phone and I think I screwed the pooch?
I followed the tutorial for doing S-Off and then rooting and installing CWM which all worked. I created a backup for my Sense OS and then decided it was time to put a new rom on so I copied the .Zip for Cyrogen Mod9 and installed it but when ever I tried unlocking it it would freeze and then reboot so I decided to restore the old one and read more. I read that it needed the right firmware so I updated to 3.33 Universal and then installed Cyrogen Mod9 and now it still has the issue and if I restore the old one it just shows the htc screen then reboots. How can I fix this?
Click to expand...
Click to collapse
Try flashing firmware again.. Then flash cyanogrm mod with 4EXT recovery.. I mean change the recovery to 4EXT and see
Sent from my HTC Sensation using xda premium

Categories

Resources