Related
Hi Guys,
Got a bit of a problem, got a sensation xe and tonight i did the s-off and rooted then tried to put a new rom on but it just bootlooped so went to recovery and did a restore and all was ok,
rooted it again and put the PG58IMG back on did the update then it just went as far as the beats logo and looped.
i tried to get into recovery but it wouldnt go and just kept saying no image or wrong image every time i tried, i read some similar threads to this and so eventually i took out the sd card and then got back into recovery but doing a restore didnt work,
took the sd card out and using the pc deleted the PG58IMG which i thought might be causing the problem, tried recovery and it started again but on rebooting it just bootloops again, can anybody help me?
Need to know exactly what you did at the time of flashing? What steps have you done and what ROM?
Sent from my HTC Sensation 4G XE with Beats Audio using xda premium
start
Ok i followed the guide on here....http://forum.xda-developers.com/showthread.php?t=1192300 got s-off and root.
tried to super cid and couldnt get it done anyway got s-off and rooted put the PG58IMG in root updated and then took it out of root then tried to put the darkforest sensation xe ics 3.2.1 rom on, got bootloop then went to recovery and did a restore, everything was then ok.
Checked the phone and it was unrooted so did another complete backup looked to see what might be wrong and i thought i had put the wrong PG58IMG on so i went and put what i thought was the right PG58IMG on updated it and then rebooted and it went into a bootloop.
Tried to do a recovery but would not allow it it just kept running through "no image" then "wrong image" then "no image" and so on.
Tried to get into recovery but wouldnt move down so after reading a similar thread i pulled the sim and got into recovery selected the first of the two restore options and it was restoring from cwd rebooted and it started on a bootloop again going to the beats logo this time.
Thank for your help btw.
Forgot to add it was the revolution system. Thanks for any help!
highlander1v said:
Ok i followed the guide on here....http://forum.xda-developers.com/showthread.php?t=1192300 got s-off and root.
tried to super cid and couldnt get it done anyway got s-off and rooted put the PG58IMG in root updated and then took it out of root then tried to put the darkforest sensation xe ics 3.2.1 rom on, got bootloop then went to recovery and did a restore, everything was then ok.
Click to expand...
Click to collapse
To install ICS roms you need an additional step. Before installing the rom you should supercid and install the new ICS firmware. You can find the link on the second line of darkforest sensation xe ics 3.2.1.
If don't want to supercid follow the instruction here and download the firmware package for your CID (3.24, revolutionary or normal).
Install the new firmware.
Remove the PG58IMG from your sd card
Install the ICS rom.
highlander1v said:
Checked the phone and it was unrooted so did another complete backup looked to see what might be wrong and i thought i had put the wrong PG58IMG
Click to expand...
Click to collapse
You don't root with PG58IMG, that's for the custom recovery. Have you installed the su-2.3.6.3-ef-signed.zip file from the guide?
Hi, yes i have the su-2.3.6.3-ef-signed.zip installed and have removed the PG58IMG from the sd card, but as i say the thing is just boot looping after the beats logo and i would like to find out the next steps to get things back to normal?
Thanks grandelama can you tell me my next move to get back to normal and out of bootloop?
What ROM do you currently have on your phone that doesn't boot? Stock or Darkforest or something else? I'm not sure what rom you restored from the backup... If you restored the Darkforest rom and didn't install the correct firmware as Grandelama said, it will get stuck in a bootloop. If you did install the firmware, try reinstalling the Darkforest rom.
Otherwise, to get your phone working, just do a full wipe in recovery and try to install any gingerbread based rom, for example Android Revolution HD 3.6.13 from here. It should install fine and get your phone to a working condition. Then you can try to get superCID and install the firmware if you want to use ICS roms.
If you have Clockworkmod working and are going to install custom roms anyway, you don't need to worry about installing the su-2.3.6.3-ef-signed.zip file, since all those custom roms are already rooted.
If you have completed without errors the points 1, 2 and 3 of the guide, and you can use Clockworkmod recovery you are now ready to install any NON ICS rom like Android Revolution HD 3.6.13.
Run the superwipe script in Android revolution HD thread, install the 3.6.13 rom and you should boot up allright
If you want to use an ICS rom your missing a step (new firmware) and you need to follow the instructions I gave you in the last post.
Ok thanks guys, i'll try that and let you know how i get on.
Dr Madman i tried the dark forest rom but it wouldnt load so went into recovery and went back to the original stock gingerbread then thinking i had put the wrong 58img changed it and updated but it just bootloaded so did a cwm restore and it still bootloads.
I'm still not sure just what to do next because i'm afraid i might make things worse.
I went into recovery then to backup and restore and then restore and this time restored the second image that was there in CWM it went thru all the recovery, asked to reboot and when i did it still keeps bootlooping.
Why is CWM not getting me back to stock?
Grandelama i'm certain i did what you suggested in your first post but got bootloop after that and CWM got me back but it hasnt worked this time!
Dr Madman,, i could do a wipedata/factory rest wipe cache partition and install Android Revolution HD 3.6.13 because its on the sd card but to be honest i'm just to frightened to at the moment, basically i wanted to go to restore and have it back as stock but it wont! and now i'm not sure which way to go?
highlander1v said:
Grandelama i'm certain i did what you suggested in your first post but got bootloop after that and CWM got me back but it hasnt worked this time!
Click to expand...
Click to collapse
If you did what I suggested you have installed the 3.24 firmware for ICS roms, am I right?
Can you tell which exact version did you install? Where did you download it from? The one from the Kohr-Ah thread...mike1986's version or what?
If you installed mike1986's version without Supercid first you will bootloop with both ICS and Gingerbread roms.
yes
Yes i am certain i did but not sure which one, heads all over the place with this, anyway i will check and get back to you.
Thanks.
Grandelama i think? this is the one i used......DOWNLOAD 3.24 Revolutionary: http://goo.gl/82UpA
MD5: 74e67609f67c3ad6ab94cdb89f19f2fa
Is there a way to find out for sure for you?
Thanks
Do you still have on your pc the zip package you used? If that's the case you can find the md5 of your file and with that you can know which firmware package you installed.
Maybe it's a stupid question, but can you tell me which is exactly your CID? What is the output you get with "fastboot getvar cid"? Are 100% you sure you installed exactly the firmware package for your CID?
Grandelama, firstly thanks for your help, i have a hero that i have rooted and had at least a dozen different roms on from 1.6 thru to 2.3 never had a problem but its been a while and this xe is it seems more complicated, either that or my brains going (more likely) anyway the CID is HTC--001 and the MID is pg5813001.
I will look and see what i have and let you know.
The phone i take it is not yet bricked??? so i really dont want to do anything to screw that up(unless its too late?)
I ran restore and got back to normal, should have left it at that but didnt and cant understand why it wont work this time, i thought thats what it was for.
Anyway i will get back to you with what info i have and thanks again
no, not now 100 sure!
Htc driver 3.0.0.007
v4.3.233.pub.odex.zip
revolutionary -0.4pre4
su-2.3.63-efgh-
darkforest sensation xe ics 3.2.1
PG58IMG
Android revolution hd sensation 3.6.13
This is what else i have plus i have a xe backup folder on the pc if this is of any use ?
is this what you are asking for?
http://forum.xda-developers.com/attachment.php?attachmentid=874000&stc=1&d=1327610186
highlander1v said:
Grandelama, firstly thanks for your help, i have a hero that i have rooted and had at least a dozen different roms on from 1.6 thru to 2.3 never had a problem but its been a while and this xe is it seems more complicated, either that or my brains going (more likely) anyway the CID is HTC--001 and the MID is pg5813001.
I will look and see what i have and let you know.
The phone i take it is not yet bricked??? so i really dont want to do anything to screw that up(unless its too late?)
I ran restore and got back to normal, should have left it at that but didnt and cant understand why it wont work this time, i thought thats what it was for.
Anyway i will get back to you with what info i have and thanks again
Click to expand...
Click to collapse
Hi,
i had the exact same problem and yesterday i solved it. I tried to flash the latest InsertCoin ICS ROM and failed to first install the new Firmware. When i realized this, i did it but forgot to check the CID, wich was not in the FW-zip.. so.. my phone just bootlooped, came to the splashscreen the rebooted. Your phone is not bricked.
This is what i did to solve it:
First i got Super-CID wich you can read about in this thread: [Guide] to Installing S-off, Unlocking, ClockWork, Root, SuperCID & S-on .. it took me about 30 sec to get Super-CID, its very easy if you just read the text.
Then i flashed the new Firmware (3.24.401.1 RUU) that you can find here [DEV] HTC Sensation & HTC Sensation XE firmware | Partitions Info | [22.01.2012]
After that i just flashed the ROM like before and voila, it worked.
Hope it helped some.
Hi all,
I have a problem with my Sensation due to my own fault.
I want to flash ARHD ICS rom to my phone, and I started with rooting my Sensation. I followed all instruction til installing the Recovery (PG58IMG).
I downloaded two versions of PG58IMG (one for ICS and one for the other), but I copied the firmware for ICS version to my SD card and already installed it. Now, my phone already S-off but cannot reboot into homescreen. It keeps rebooting it self in white hTC screen (after I installed the ICS firmware).
I don't know how to fix. I tried to read the troubleshoot in the post but I still cannot fix it. Does anyone have a solution??
Thanks in advance
chuz said:
Hi all,
I have a problem with my Sensation due to my own fault.
I want to flash ARHD ICS rom to my phone, and I started with rooting my Sensation. I followed all instruction til installing the Recovery (PG58IMG).
I downloaded two versions of PG58IMG (one for ICS and one for the other), but I copied the firmware for ICS version to my SD card and already installed it. Now, my phone already S-off but cannot reboot into homescreen. It keeps rebooting it self in white hTC screen (after I installed the ICS firmware).
I don't know how to fix. I tried to read the troubleshoot in the post but I still cannot fix it. Does anyone have a solution??
Thanks in advance
Click to expand...
Click to collapse
If I understand you correctly you flashed the firmware upgrade BEFORE you flashed the new ICS rom? If so you'll need to get your sdcard card out (and get your computer to read it) so you can rename the PG85img on your sdcard so you can get back into recovery so you can flash the new ICS rom.
runderekrun said:
If I understand you correctly you flashed the firmware upgrade BEFORE you flashed the new ICS rom? If so you'll need to get your sdcard card out (and get your computer to read it) so you can rename the PG85img on your sdcard so you can get back into recovery so you can flash the new ICS rom.
Click to expand...
Click to collapse
Yes, I flashed the upgraded firmware before not only I flashed ICS rom, but also I get rooted. Now, I can't flash any rom as well as su-2.3.6.1-ef-signed.zip or su-2.3.6.3-efgh-signed.zip.
It still keep bootlooping. I tried to flash the other firmware, but it showed 'CID incorrect'. I don't know how to fix now
Did you check MD5 Sums before you flashed the ROM because it sounds like a bad download so re-download the ROM and reflash
Jonny said:
Did you check MD5 Sums before you flashed the ROM because it sounds like a bad download so re-download the ROM and reflash
Click to expand...
Click to collapse
I did check MD5 sums for all files I downloaded and it is corrected.
Now, I'm curious that whether it is possible to flash the upgraded firmware before being rooted.
And of course you need to be using the right version of the firmware for the rom you want to flash. Mike's latest uses 3.24 per here. http://forum.xda-developers.com/showthread.php?t=1459767
I don't know if you can get into fastboot or not, but you should be able to check the CID of your phone there, and download the right firmware for your phone. If your phone is carrier independent (i.e. didn't get on contract) then the HTC__xxx variety should be good.
airzone said:
And of course you need to be using the right version of the firmware for the rom you want to flash. Mike's latest uses 3.24 per here. http://forum.xda-developers.com/showthread.php?t=1459767
I don't know if you can get into fastboot or not, but you should be able to check the CID of your phone there, and download the right firmware for your phone. If your phone is carrier independent (i.e. didn't get on contract) then the HTC__xxx variety should be good.
Click to expand...
Click to collapse
Thank you so much for your link. I can boot my Sensation into the homescreen now. For my problem, I have to download and flash the older version (3.17) to fix it.
Thanks all of you for your reply again.
+1 for me, solve with a new download .
Just flash the Mod, the bootloop is normal.
I got the same problem, before i flashed Revolution Rom i used that radio package. After the radio package flash, my phone wass stuck in a bootloop.
I took the memory card out en removed the zip file en flashed the revolution rom. After that my phone started normal.
SOrry for the bad enlgish.
Good luck mate.
hey, guys i just had the same problem, kinda. lol
anyways my phone is rooted, s-off and superCID
when i went to install the new ics rom i did everything this thread http://forum.xda-developers.com/showthread.php?t=1459767
said to do and when the new root booted up for the first time, it would go up to the beats audio logo,( the ics rom with beats audio (xe)) then like restart back to the htc startup logo, then beats again then htc again, it just kept doing this..??
so i just deleated everything and restored back to origional backup rom.
so what did i do wrong?
a bad download link/file? can u give me a good one?
thanks, any help is greatly appreciated as iam totally lost right now...
edit:
also do i even need this file (PG58IMG.zip.) to flash the ics rom if my phone is superCID ??? iam confused on that part.
nevermind, figured it out and got it work! the new ics is pretty sweet!!
thanks for everything- towards all the developers and testers on here
Cool. The answer is yes of course. The firmware file contains a specific radio / hboot / etc version. The ROM you download and install is dependent on certain combinations of the firmware versions you have. The super cid just allows you to flash any of the firmwares available here... Otherwise you have to find the specific one for your region and/or carrier.
Also, don't forget you can use an adb logcat while your phone is booting to see if you can diagnose any boot-looping issues. Just run that command on your PC with your phone attached via USB cable
Kawirider594 said:
hey, guys i just had the same problem, kinda. lol
anyways my phone is rooted, s-off and superCID
when i went to install the new ics rom i did everything this thread http://forum.xda-developers.com/showthread.php?t=1459767
said to do and when the new root booted up for the first time, it would go up to the beats audio logo,( the ics rom with beats audio (xe)) then like restart back to the htc startup logo, then beats again then htc again, it just kept doing this..??
so i just deleated everything and restored back to origional backup rom.
so what did i do wrong?
a bad download link/file? can u give me a good one?
thanks, any help is greatly appreciated as iam totally lost right now...
edit:
also do i even need this file (PG58IMG.zip.) to flash the ics rom if my phone is superCID ??? iam confused on that part.
Click to expand...
Click to collapse
To do so,
1. Download the correct firmware version ( PG58IMG.zip V3.24 ) and copy it to the root of your SDCARD.
Be 200% sure that the downloaded zip file is not corrupted. ( Check the MD5 checksum after you download)
2. Pull Back the battery and wait for a minute.
3. Put the battery and press POWER+VOLUME Down Key together.
4. Your phone will detect the firmware.
5. Follow the screen and complete the flashing.
6. Download the ICS based ROM of your favor.
7. Boot into recovery and flash your rom.
Kawirider594 said:
hey, guys i just had the same problem, kinda. lol
anyways my phone is rooted, s-off and superCID
when i went to install the new ics rom i did everything this thread http://forum.xda-developers.com/showthread.php?t=1459767
said to do and when the new root booted up for the first time, it would go up to the beats audio logo,( the ics rom with beats audio (xe)) then like restart back to the htc startup logo, then beats again then htc again, it just kept doing this..??
so i just deleated everything and restored back to origional backup rom.
so what did i do wrong?
a bad download link/file? can u give me a good one?
thanks, any help is greatly appreciated as iam totally lost right now...
edit:
also do i even need this file (PG58IMG.zip.) to flash the ics rom if my phone is superCID ??? iam confused on that part.
Click to expand...
Click to collapse
No you didn't do everything the thread said to do because you're stuck in a bootloop. And yes, you must have correct firmware to run any ICS ROM.
1. SuperCID.
2. Load correct firmware for ROM version you wish to flash (there are 3 different firmwares, 3.06, 3.12 and 3.24. Make sure you've got the right one.
Put PG58IMG.zip on the root of your damn SD card.
Put the ROM you want on the root of your damn SD card.
Put a wipe or superwipe script on the root of your damn SD card.
So far it's easy, no?
Boot to bootloader, select FASTBOOT, select yes to update.
Watch the phone. You should see it flash some partitions, reboot itself, then flash the radio and some other crap.
When done you should be at correct HBOOT and radio.
Now, pull the battery. Pull the SD card.
Insert the battery. Start the phone with power + Volume down.
Move cursor to recovery.
Insert SD card and select recovery.
Flash the wipe script, flash the ROM.
Now if you did everything exactly like this, you will boot to normal phone in about 10 minutes or so.
This has been spelled out 50 times in 50 threads, including threads devoted to nothing but this procedure.
Your phone is a machine. It can only do what you tell it to do. If you screw up, it's screwed up. If you do everything exactly right, in the right order, carefully checking each step, your phone will behave.
Try again.
Do it right. Do it carefully.
P.
A few month ago, I updated my wife's DesireS with a custom rom so she could have the Sense 3 before the official update.
I installed the clockwork recovery, but now I cannot install the official rom, because after the install's reboot, I'm in recovery and it doesn't flash the update.
Altought I have a EVO3D with KingCobra's 1.9 Rom, I'm not too familiar with HBOOT and RECOVERY, and I couldn't find an original Desire S recovery to allow the offical update.
Of course, I made some google searches, but I couldn't find how to solve this problem. Most replies tell to flash another rom, not the official. But my wife is my wife, and each time she has a problem, she tells me that it is because it is not an official (bug free?) ROM.
I tried to run a shipped rom from this thead : http://forum.xda-developers.com/showthread.php?t=1002506 , but I fall in a boot loop, not able to enter recovery, no USB connection to flash with recoverymanager, and at a moment, I even thinked I bricked the phone.
Fortunately, I found the VolUP+Power several times, and I was able the re-flash the previous rom.
Can someone help me please.
Thank you.
@kitarolivier
Little unsure on what you are needing.
Do you 1) want to revert the phone to stock, i.e. as you first got it (s-on again/no custom recovery/not rooted) or 2) flash a stock ROM but the latest (still s-off/able to root/custom recovery installed).
Also you need to provide more info, like the current hboot, and what method you used to s-off, what was the software version when you s-offed, which RUU you tried. More info easier and more direct solution.
The thread you linked are RUU's to get the phone to point 1.
foX2delta : Thank you for reading and replying.
You are right : I want to revert it as i received it. My goal is to install last offical rom with the htc update in the settings.
I will post hboot version when I'll get hands on my wife's phone. I didn't expected a reply so soon
I installed a rooted rom (can remember which one) with rom manager.
Full information this evening (GMT+1).
@kitarolivier
How did you s-off the phone? Also do you know if the phone is a Europe unbranded device?
@foX2delta :
The phone is S-OFF
HBOOT 6.98.1002
It's an unbranded european phone.
Is this enough as information ?
You should be able to flash this eng hboot http://forum.xda-developers.com/showpost.php?p=17481836&postcount=2 via fastboot, then you should be able to flash the stock rom that you tried to flash previously
Sent from my HTC Desire S using XDA App
Thank you for the answer. I'll check that tomorrow, because I'm not home today.
Regards,
Olivier.
@kitarolivier
Pretty easy fix.
Have a look at this guide I wrote here, follow section 2.
If you want to get the latest (2.3.5/sense 3.0) then use the 2.10.401.8 RUU.
Hello,
I find lots of helpfull contents here, especially in your guide @foX2delta.
I'm a bit interessted by the second method to get stock ROM "2) flash a stock ROM but the latest (still s-off/able to root/custom recovery installed)."
Is it possible to get the stock ROM and keep s-off and custom recovery ? Have you a guide about this ?
I know it's possible to get the ROM from RUU but how to install this rom.zip ?
thank you in advance, bye
ps: sry for my poor english
@LitonX
If your phone is s-off and you have a custom recovery then it is as easy and flashing a rom, see this thread for prerooted stock roms.
thx,
i get HTC_Europe_2.10.401.9_Prerooted_Deodexed (http://forum.xda-developers.com/showthread.php?t=1480576). it's works fine.
I have a last one question. it is complicated to make my own flashable .zip from the "rom.zip" wich is obtained by RUU (start RUU and get rom.zip in %tmp%) ?
foX2delta said:
@kitarolivier
Pretty easy fix.
Have a look at this guide I wrote here, follow section 2.
If you want to get the latest (2.3.5/sense 3.0) then use the 2.10.401.8 RUU.
Click to expand...
Click to collapse
I followed with success the section 2 of your tutorial. I also donwloaded in installed the ROM you suggested, and it was OK. After that, the device updated a few apps (FB, locations, etc...).
Many thanx for your help, and I will press the thanki button right now, so you are now at 33 I think.
Olivier.
@kitarolivier
Good stuff, glad it all worked out for you!!
hello.. i have same case to.. i want to get back to s-on..
i`ve tried all tips and trick, but it still didnt work...
could you give me some solution?..
sendietera said:
hello.. i have same case to.. i want to get back to s-on..
i`ve tried all tips and trick, but it still didnt work...
could you give me some solution?..
Click to expand...
Click to collapse
Follow section 2 of post: http://androidforums.com/3405058-post1.html
Basically, you have to go through flashing the bootloader twice.
I am wondering if I made any major changes or done anything wrong.
1) Yesterday I attempted to "S-Off" my phone for the first time ever since purchase. When "revolutionary.io" asked me what Bootloader I was on, I connected the phone through USB and the revolutionary executable told me 1.18.0000. The first few tries failed because it just kept saying "Waiting for bootloader" but after messing with different HTC drivers and unplugging a bunch of times it finally took and went through S-off. Now when I boot into bootloader it says my verison is 1.17 S-off. Is it correct that I went backwards from 1.18 to 1.17?
2) I flashed a custom ROM but being a noob that I am I knew nothing about firmware so I was stuck in bootloop of Cyanogen JB. I flashed through RUU to stock ROM but it is not the same stock ROM that came with my phone out of the box, some of the settings are different it does have the same network though TMOUS; especially the personalize options some of them do not work (themes). Is it alright if I flashed to this ROM as opposed to the exact same one that my phone came with? If I update my firmware and flash Cyanogen again this ROM is basically gone anyways right? I am just concerned that by RUU flashing this stock ROM I changed the firmware or baseband or something important.
Thats all I'm wondering, hoping you can give me a Yes or a No and a brief explanation to each question, thanks so much
fashofasho said:
I am wondering if I made any major changes or done anything wrong.
1) Yesterday I attempted to "S-Off" my phone for the first time ever since purchase. When "revolutionary.io" asked me what Bootloader I was on, I connected the phone through USB and the revolutionary executable told me 1.18.0000. The first few tries failed because it just kept saying "Waiting for bootloader" but after messing with different HTC drivers and unplugging a bunch of times it finally took and went through S-off. Now when I boot into bootloader it says my verison is 1.17 S-off. Is it correct that I went backwards from 1.18 to 1.17?
2) I flashed a custom ROM but being a noob that I am I knew nothing about firmware so I was stuck in bootloop of Cyanogen JB. I flashed through RUU to stock ROM but it is not the same stock ROM that came with my phone out of the box, some of the settings are different it does have the same network though TMOUS; especially the personalize options some of them do not work (themes). Is it alright if I flashed to this ROM as opposed to the exact same one that my phone came with? If I update my firmware and flash Cyanogen again this ROM is basically gone anyways right? I am just concerned that by RUU flashing this stock ROM I changed the firmware or baseband or something important.
Thats all I'm wondering, hoping you can give me a Yes or a No and a brief explanation to each question, thanks so much
Click to expand...
Click to collapse
when you did S-OFF in order to install Cyanogen JB first you had to flash the latest fw version and then the rom
the rom you tried to install requires the latest fw version
now are you still s-off?
what is now your hboot version?
what is your fw version?
I am wondering if I made any major changes or done anything wrong.
1) Yesterday I attempted to "S-Off" my phone for the first time ever since purchase. When "revolutionary.io" asked me what Bootloader I was on, I connected the phone through USB and the revolutionary executable told me 1.18.0000. The first few tries failed because it just kept saying "Waiting for bootloader" but after messing with different HTC drivers and unplugging a bunch of times it finally took and went through S-off. Now when I boot into bootloader it says my verison is 1.17 S-off. Is it correct that I went backwards from 1.18 to 1.17?
2) I flashed a custom ROM but being a noob that I am I knew nothing about firmware so I was stuck in bootloop of Cyanogen JB. I flashed through RUU to stock ROM but it is not the same stock ROM that came with my phone out of the box, some of the settings are different it does have the same network though TMOUS; especially the personalize options some of them do not work (themes). Is it alright if I flashed to this ROM as opposed to the exact same one that my phone came with? If I update my firmware and flash Cyanogen again this ROM is basically gone anyways right? I am just concerned that by RUU flashing this stock ROM I changed the firmware or baseband or something important.
Thats all I'm wondering, hoping you can give me a Yes or a No and a brief explanation to each question, thanks so much
Click to expand...
Click to collapse
1) Normal. You're good. And you'll have HBoot 1.27 or 1.29 when you're all done.
2) Not normal. You missed a step. You need to upgrade the firmware to 3.32 (HBoot 1.27) or 3.33 (HBoot 1.29). Either will run CM10, which gives you better performance is for you to decide. The difference is mainly the radio for cell reception. If you're a T Mobile user try the 3.32 for T Mobile for starters. (Available in the radio/firmware thread. Do a search and you'll find it.)
Basicly what you did was flash an Android 4.x ROM on Android 2.3 firmware. That doesn't work. They are incompatible.
If you RUU'ed back to stock, you might have reverted back to S-On and lost your custom recovery, so check. If you have S-On now, you have to start over.
If you still have s-off and can still get into your recovery (Clockwork or 4EXT, I receomend 4EXT but CM10 will load from either), find that Firmware thread, download 3.32 for T Mobile. Follow the instructions in that thread on how to install new firmware. It's painfully simple...you just put the firmware file on teh SD card, reboot, and let it do it's thing. The firmware thread will be more specific, but that's about it. It takes 2 minutes. The phone will suddenly go black and power off for a second during the process. Don't panic. It's normal. AND DON'T TOUCH IT UNTIL IT TELLS YOU TO!!!!
Once you've done that, the stock ROM you have now will not boot. You will need to boot to recovery (Clockwork or 4EXT), do a full wipe, and flash CM10 again.
It should not boot.
This entire process (if you are still s-off and have your recovery working still) should take no more than 15 minutes. It sounds complicated but it's really not. I promise!
I just gave you a general overview. If you get stuck at any point come back and ask more specific questions about where you are stuck.
Skipjacks said:
1) Normal. You're good. And you'll have HBoot 1.27 or 1.29 when you're all done.
2) Not normal. You missed a step. You need to upgrade the firmware to 3.32 (HBoot 1.27) or 3.33 (HBoot 1.29). Either will run CM10, which gives you better performance is for you to decide. The difference is mainly the radio for cell reception. If you're a T Mobile user try the 3.32 for T Mobile for starters. (Available in the radio/firmware thread. Do a search and you'll find it.)
Basicly what you did was flash an Android 4.x ROM on Android 2.3 firmware. That doesn't work. They are incompatible.
If you RUU'ed back to stock, you might have reverted back to S-On and lost your custom recovery, so check. If you have S-On now, you have to start over.
If you still have s-off and can still get into your recovery (Clockwork or 4EXT, I receomend 4EXT but CM10 will load from either), find that Firmware thread, download 3.32 for T Mobile. Follow the instructions in that thread on how to install new firmware. It's painfully simple...you just put the firmware file on teh SD card, reboot, and let it do it's thing. The firmware thread will be more specific, but that's about it. It takes 2 minutes. The phone will suddenly go black and power off for a second during the process. Don't panic. It's normal. AND DON'T TOUCH IT UNTIL IT TELLS YOU TO!!!!
Once you've done that, the stock ROM you have now will not boot. You will need to boot to recovery (Clockwork or 4EXT), do a full wipe, and flash CM10 again.
It should not boot.
This entire process (if you are still s-off and have your recovery working still) should take no more than 15 minutes. It sounds complicated but it's really not. I promise!
I just gave you a general overview. If you get stuck at any point come back and ask more specific questions about where you are stuck.
Click to expand...
Click to collapse
i got confused
.i think your answer is going for fashofasho
Skipjacks said:
1) Normal. You're good. And you'll have HBoot 1.27 or 1.29 when you're all done.
2) Not normal. You missed a step. You need to upgrade the firmware to 3.32 (HBoot 1.27) or 3.33 (HBoot 1.29). Either will run CM10, which gives you better performance is for you to decide. The difference is mainly the radio for cell reception. If you're a T Mobile user try the 3.32 for T Mobile for starters. (Available in the radio/firmware thread. Do a search and you'll find it.)
Basicly what you did was flash an Android 4.x ROM on Android 2.3 firmware. That doesn't work. They are incompatible.
If you RUU'ed back to stock, you might have reverted back to S-On and lost your custom recovery, so check. If you have S-On now, you have to start over.
If you still have s-off and can still get into your recovery (Clockwork or 4EXT, I receomend 4EXT but CM10 will load from either), find that Firmware thread, download 3.32 for T Mobile. Follow the instructions in that thread on how to install new firmware. It's painfully simple...you just put the firmware file on teh SD card, reboot, and let it do it's thing. The firmware thread will be more specific, but that's about it. It takes 2 minutes. The phone will suddenly go black and power off for a second during the process. Don't panic. It's normal. AND DON'T TOUCH IT UNTIL IT TELLS YOU TO!!!!
Once you've done that, the stock ROM you have now will not boot. You will need to boot to recovery (Clockwork or 4EXT), do a full wipe, and flash CM10 again.
It should not boot.
This entire process (if you are still s-off and have your recovery working still) should take no more than 15 minutes. It sounds complicated but it's really not. I promise!
I just gave you a general overview. If you get stuck at any point come back and ask more specific questions about where you are stuck.
Click to expand...
Click to collapse
Thanks for the reply. Okay so here is where I am currently at. I haven't done anything since I reflashed stock ROM throguh RUU after the fail cyanogen flash. On this stock ROM whenever I load into bootloader it still says s-off 1.17 but I did lose my clockworkmod. So according to your instructions I should either clockworkmod again or 4ext now, that's okay right? If so, going to flash firmware then cyanogen!! Or is there a problem that I have s-off but not recovery.
P.s. there is no point in running revolutionary and have it s-off again when I already have it right, just thought it might be necessary to make things fresh
If you have a bootable phone right now this is easy as you may not need adb or fast boot or anything.
First off you will need to install 4ext. Get the app from the Play Store. Then run it and let it install its recovery module. (You may need to be rooted to do thus, which your stock rom is not. Im not sure if you can flash the recovery without root or not because Ive never tried without root. If so, then you will have to install Superuser via fastboot I think. You any guide for rooting to get instructions on this. Its easy.)
You may also find a way to install 4ext recovery via flashing from bootloader, but you will have to search for that. You MAY even be able to install it with the firmware upgrade. You will have to see if that is an available option.
Get your firmware from this thread...
forum.xda-developers.com/showthread.php?t=1459767
Follow the instructions to update. Once you have 3.3x firmware and 4ext simply boot to recovery, do a full wipe, and flash cm10 (make sure cm10 is on your sd card. You can download it from your currently working gingerbread rom so you have it available)
You have like 15-20 minutes worth of work to do, so its not a monumental obstacle to overcome. It just seems like alot
Sent from my HTC Sensation using xda app-developers app
Skipjacks said:
If you have a bootable phone right now this is easy as you may not need adb or fast boot or anything.
First off you will need to install 4ext. Get the app from the Play Store. Then run it and let it install its recovery module. (You may need to be rooted to do thus, which your stock rom is not. Im not sure if you can flash the recovery without root or not because Ive never tried without root. If so, then you will have to install Superuser via fastboot I think. You any guide for rooting to get instructions on this. Its easy.)
You may also find a way to install 4ext recovery via flashing from bootloader, but you will have to search for that. You MAY even be able to install it with the firmware upgrade. You will have to see if that is an available option.
Get your firmware from this thread...
forum.xda-developers.com/showthread.php?t=1459767
Follow the instructions to update. Once you have 3.3x firmware and 4ext simply boot to recovery, do a full wipe, and flash cm10 (make sure cm10 is on your sd card. You can download it from your currently working gingerbread rom so you have it available)
You have like 15-20 minutes worth of work to do, so its not a monumental obstacle to overcome. It just seems like alot
Sent from my HTC Sensation using xda app-developers app
Click to expand...
Click to collapse
I am not rooted but am S-off. So my next step would be to root. I am suppose to have Clockworkmod to root AND 4EXT after right? Its not one or the other? I keep reading that people recommend 4ext is better than CWM but in order to root su-2.3.6.3-ef-signed.zip I need CWM first correct?
fashofasho said:
I am not rooted but am S-off. So my next step would be to root. I am suppose to have Clockworkmod to root AND 4EXT after right? Its not one or the other? I keep reading that people recommend 4ext is better than CWM but in order to root su-2.3.6.3-ef-signed.zip I need CWM first correct?
Click to expand...
Click to collapse
flash su-2.3.6.3-ef-signed.zip first and then install 4ext recovery
You're over engineering this. You don't need to root your current ROM first. That's an extra step since you're s-off.
If you are s-off it's really simple to get 4EXT recovery.
First, download this and put it on the root directory of your SD Card (meaning not in a folder, just on the SD Card. Do not rename it)
http://d-h.st/qnm
I got this download link from here...
http://forum.xda-developers.com/showthread.php?p=21989107
Click Thanks for Joaquinf in that thread. He made the 4EXT zip that's flashable through the bootloader.
That is 4EXT made into a zip file that's flashable via the bootloader, which you can do when you are S-off.
So put that file on the SD card, power the phone off, pull the battery out for a second and put it back in (this stops fastboot so you can get back to the bootloader). Then hold volume down and power at the same time. You have to hit both buttons at the same time. If it goes to the splash screen, pull the battery and try again.
When the bootloader loads up it will immediately find the PM58IMG.zip file. It will ask you if you want to install the update. Say yes by hitting volume up I think (it will tell you how to say yes)
Put the phone down and don't touch it until it tells you it's done. Should just take a second. But seriously don't touch it. Leave it alone.
If that works, you've just flashed 4EXT. You can check it by pulling the SD card out (so it doesn't try to flash the PM58IMG again) and rebooting to the bootloader and selecting 'recovery' from the menu. 4EXT should boot up.
This entire process so far shouldn't take more than 3 minutes total. It just sounds like a lot.
To see this detailed out by someone else in case you want to check what I'm saying, read steps 4 and 5 of the first post in this thread.
http://forum.xda-developers.com/showpost.php?p=21989063&postcount=1
Give the author 'thanks' again because he's awesome and deserves it.
Now you've got 4EXT installed. Great. You're 1/3rd of the way home.
Now you need to update your firmware. Delete the PM58IMG.zip file you used to flash 4EXT off the SD card (use a card reader or boot the phone up and delete it, whatever works. You can also use 4EXT as a card reader now too by choosing USB storage from inside 4EXT. It will give you access toteh SD card on your computer now)
Now get new Firmware from this thread.
http://forum.xda-developers.com/showthread.php?p=21711154#post21711154
try the 3.33 firmware universal. First download link in post 2 of the thread above.
CHECK THE MD5 SUM!!!! I'M NOT PLAYING AROUND HERE!!! You are worried about bricking your phone, this is where you can do it if the firmware .zip is bad.
Put that PM58IMG file on your SD and flash it in the bootloader the same way you flashed 4EXT recovery a minute ago. (If you're still in 4EXT recovery you can use it's power menu to reboot into bootloader easily.)
This will take a minute. The phone will shut off and go black in the middle of this process. Your heart will skip a beat. Relax. It'll come back on. Again, put the phone down and walk away while it does it's thing and don't touch it until it says it's done.
Delete the PM58IMG file from your SD card.
You are now 2/3 of the way there. Your phone WILL NOT boot up right now because your ROM is not compatible with your firmware. Relax. That's supposed to happen.
Now you can flash CM10. Make sure you have the CM10.zip file on your SD card nad GApps. (Bruce has Gapps in his downloads page). Delete the PM58IMG firmware file from your SD card (that's important)
Pull the battery again so you can get back into bootloader. Get into bootloader (power + volume down)
Select Recovery
4EXT should boot up.
Go to the Wipe menu. Wipe all partitions except SD card. (Old ROM is now gone)
Go back to the main menu.
Install from SD
Find the CM10.zip file you should have downloaded and put onto the SD card. Flash it.
This will take about 3 minutes. 4EXT will flash it and ask if you want to reboot. You do not yet. Not you need to flash Gapps the same way you flashed the ROM.
When that's done, now you can reboot. You shoudl see the CyanogenMod boot animation after the splash screen. Give it a few minutes to boot up this first time. Once it boots, set it up the way you like it. If you enjoy it, donate a few bucks to the developer, Bruce.
You don't have to root CM10. It's already rooted when you boot it up the first time.
HI! Today I got an HTC Sensation from a friend and it was laggy due to it's stock rom with preinstalled apps and stuff, so I decided to move to a custom ROM, the first one which caught my eye was 5.0 CM12 from the development section, so I copied it to sdcard.
I have managed to unlock the bootloader through the htcdev site and then flashed the lasted CWM Recovery available, 5.8.0 and then formatted cache, data, system, dalvik, because that's what I've always been doing on my Galaxy S2, it was very straight forward.
But now, I can't install a custom rom, tried that one and the slim pyramid one, even a cyanogenmod rom but still no luck. It would abort the installation and output an error about filesystems which can't be found or it woudn't say nothing but will restart the phone straight to recovery mode.
Also, tried 4ext recovery and still no luck. At this point I started panicking and tried to resolve this by installing the stock rom, RUU.
Downloaded RUU_PYRAMID_ICS_HTC_Europe_3.33.401.53_Radio_11.76A.3504.00U_11.24A.3504.31_M_release_280871_signed , which is the perfect match for my phone but also fails to finish installation, telling me something about failed/unknown mounts/filesystem... If it will help, I will tell you exactly what the error is.
At this moment I have S-On in bootloader, and can't see any radio serial metioned at the top. Tried some instructions flashing PG58IMG.zip , but it doesn't seem to do anything.
Please, help me out because at this point my phone won't go anywhere but bootloader and recovery.
AKAndrew41 said:
HI! Today I got an HTC Sensation from a friend and it was laggy due to it's stock rom with preinstalled apps and stuff, so I decided to move to a custom ROM, the first one which caught my eye was 5.0 CM12 from the development section, so I copied it to sdcard.
I have managed to unlock the bootloader through the htcdev site and then flashed the lasted CWM Recovery available, 5.8.0 and then formatted cache, data, system, dalvik, because that's what I've always been doing on my Galaxy S2, it was very straight forward.
But now, I can't install a custom rom, tried that one and the slim pyramid one, even a cyanogenmod rom but still no luck. It would abort the installation and output an error about filesystems which can't be found or it woudn't say nothing but will restart the phone straight to recovery mode.
Also, tried 4ext recovery and still no luck. At this point I started panicking and tried to resolve this by installing the stock rom, RUU.
Downloaded RUU_PYRAMID_ICS_HTC_Europe_3.33.401.53_Radio_11.76A.3504.00U_11.24A.3504.31_M_release_280871_signed , which is the perfect match for my phone but also fails to finish installation, telling me something about failed/unknown mounts/filesystem... If it will help, I will tell you exactly what the error is.
At this moment I have S-On in bootloader, and can't see any radio serial metioned at the top. Tried some instructions flashing PG58IMG.zip , but it doesn't seem to do anything.
Please, help me out because at this point my phone won't go anywhere but bootloader and recovery.
Click to expand...
Click to collapse
install latest 4ext from here
http://d-h.st/rG7
extract the recovery.img and flash it via fastboot command
the command is fastboot flash recovery recovery.img
then from 4ext format all partitions except sdcard
enable smartflash( because you are on S-ON)
flash the custom rom
note: enable smartflash exactly before flashing the rom
Thank you very much! I've managed to install SKimKAT now. But how can I get S-Off permanent? Also, I can't install the stock RUU firmware.
RUU_PYRAMID_ICS_HTC_Europe_3.33.401.53_Radio_11.76A.3504.00U_11.24A.3504.31_M_release_280871_signed
It freezes on the "sending" stage for hours.
AKAndrew41 said:
Thank you very much! I've managed to install SKimKAT now. But how can I get S-Off permanent? Also, I can't install the stock RUU firmware.
RUU_PYRAMID_ICS_HTC_Europe_3.33.401.53_Radio_11.76A.3504.00U_11.24A.3504.31_M_release_280871_signed
It freezes on the "sending" stage for hours.
Click to expand...
Click to collapse
see this guide
http://forum.xda-developers.com/showthread.php?t=2751187