Before you begin rooting you must keep this in mind that “Rooting will void your warranty”
Important note: Do not disturb the process i.e remove the battery etc.
Important Note: Make sure that battery is atleast 85% as preventive measures
Instruction:
1) Download and install SAMSUNG USB Drivers for Mobile Phones
(You may install Samsung KIES for this) – LINK
2) Copy update_su.zip to internal sdcard.
3) Switch off the phone and enter to download mode (“Vol Down + Home + Power”).
Wait until the driver will be installed and Odin will recognize the phone!
4) Flash I8160XXLD8_ready_to_root_ANT.tar.md5 using Odin as PDA part.
(Original : I8160XXLD8_original.tar.md5)
5) Turn off the phone again and enter to recovery mode (“Vol Up + Home + Power”).
6) Select “apply update from sdcard” and choose update_su.zip file
7) Reboot the phone
8) Rooting Successful
Visit my Site DreamProject.asia
that's old kernel u can flash new kernel XXLI2 or HDKernel
This method is perfect. Thank you. :good:
wpgwpg said:
This method is perfect. Thank you. :good:
Click to expand...
Click to collapse
+1
Hi OP I just bought the ACE 2 today. The baseband version is I8160XXLH3, can I root using your fioles and instructions? Thanks
First: thanks for the guide, it may come handy for the newcommers
Second: you should mention about other methods of rooting that won't void the warranty
Good place to start your adventure with ACE 2 is here:
http://forum.xda-developers.com/showthread.php?t=1971565
WiCiO_MeDi said:
First: thanks for the guide, it may come handy for the newcommers
Second: you should mention about other methods of rooting that won't void the warranty
Good place to start your adventure with ACE 2 is here:
http://forum.xda-developers.com/showthread.php?t=1971565
Click to expand...
Click to collapse
I don't think there's any way to prevent warranty from getting void after rooting
owl74 said:
Hi OP I just bought the ACE 2 today. The baseband version is I8160XXLH3, can I root using your fioles and instructions? Thanks
Click to expand...
Click to collapse
Yes it should work, but keep the warning in mind, it will void your warranty
AayushK said:
I don't think there's any way to prevent warranty from getting void after rooting
Click to expand...
Click to collapse
Then let me educate you a bit
You can flash rooted rom without increasing the flash counter and if something goes wrong then you just flash stock rom and there's no way to tell that you had rooted your device.
hello guys,
I'm newbie in android, so if all of you dont mind i would like to ask about rooting ace 2:
My Ace 2 baseband is I8160DXLF2 is it possible using this tutorial to rooting my ace 2 ?
i dont understand why the baseband different like mine, i see other baseband start with XX or other mine is DX
thank you for reading my stupid question
WiCiO_MeDi said:
Then let me educate you a bit
You can flash rooted rom without increasing the flash counter and if something goes wrong then you just flash stock rom and there's no way to tell that you had rooted your device.
Click to expand...
Click to collapse
Oh man.! thats just a trick to fool people at service center :|
oceanserv said:
hello guys,
I'm newbie in android, so if all of you dont mind i would like to ask about rooting ace 2:
My Ace 2 baseband is I8160DXLF2 is it possible using this tutorial to rooting my ace 2 ?
i dont understand why the baseband different like mine, i see other baseband start with XX or other mine is DX
thank you for reading my stupid question
Click to expand...
Click to collapse
Its fine if the baseband is differen, and thats not a stupid question for a newb.
well, you may find the kernel for your version, there are many here..
just go for 'insecure kernels'
AayushK said:
Its fine if the baseband is differen, and thats not a stupid question for a newb.
well, you may find the kernel for your version, there are many here..
just go for 'insecure kernels'
Click to expand...
Click to collapse
thanks for replying, i got newest firmware download from sammobile. then what i should do next ?
oceanserv said:
thanks for replying, i got newest firmware download from sammobile. then what i should do next ?
Click to expand...
Click to collapse
You have DXLK2 right? I created a package that won't increase your flash/custom binary counter (won't void warranty when you flash the package) using odin but its pretty big so if you know how to use Ubuntu 12.XX then you should try and do it on your own. The guide is found here: http://forum.xda-developers.com/showthread.php?t=1881964
Lastly, don't hesitate to ask questions.
Dr01nE said:
You have DXLK2 right? I created a package that won't increase your flash/custom binary counter (won't void warranty when you flash the package) using odin but its pretty big so if you know how to use Ubuntu 12.XX then you should try and do it on your own. The guide is found here: http://forum.xda-developers.com/showthread.php?t=1881964
Lastly, don't hesitate to ask questions.
Click to expand...
Click to collapse
Could you make us a pre-rooted DXLK2 just like the tutorial you taught... I dont have a linux and I dont want to run a virtual machine...
I dont mind downloading big files, as long as it is worth to download for :good:
oceanserv said:
thanks for replying, i got newest firmware download from sammobile. then what i should do next ?
Click to expand...
Click to collapse
You need to flash it as PDA using Odin...
just as in guide above
kernel problem?
hi. i have a problem. i move the update_su.zip to sd card properly so i can see it but when i select and install update_su.zip installing line like this:
--Install /sdcard ...
Finding update package...
Opening update package...
Verifying update package...
Installing update...
install_package = (0)
so it didnt rooted. what is my mistake? my count now 2 because i replayed the procude twice. but nothing happens..
my kernel version is:
2.6.35.7-I8169XXLD8-CL1100997
[email protected] #2
SMP PREEMPT Tue Apr 24 05:35:29 KST 2012
and this is the Odin log
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I8160XXLD8_ready_to_root_ANT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> kernel.bin.md5
<ID:0/009> NAND Write Start!!
<ID:0/009> RQT_CLOSE !!
<ID:0/009> RES OK !!
<ID:0/009> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/009> Removed!!
Balyoz said:
hi. i have a problem. i move the update_su.zip to sd card properly so i can see it but when i select and install update_su.zip installing line like this:
--Install /sdcard ...
Finding update package...
Opening update package...
Verifying update package...
Installing update...
install_package = (0)
so it didnt rooted. what is my mistake? my count now 2 because i replayed the procude twice. but nothing happens..
my kernel version is:
2.6.35.7-I8169XXLD8-CL1100997
[email protected] #2
SMP PREEMPT Tue Apr 24 05:35:29 KST 2012
and this is the Odin log
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I8160XXLD8_ready_to_root_ANT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> kernel.bin.md5
<ID:0/009> NAND Write Start!!
<ID:0/009> RQT_CLOSE !!
<ID:0/009> RES OK !!
<ID:0/009> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/009> Removed!!
Click to expand...
Click to collapse
zip corrupted redownload it
Balyoz said:
hi. i have a problem. i move the update_su.zip to sd card properly so i can see it but when i select and install update_su.zip installing line like this:
--Install /sdcard ...
Finding update package...
Opening update package...
Verifying update package...
Installing update...
install_package = (0)
so it didnt rooted. what is my mistake? my count now 2 because i replayed the procude twice. but nothing happens..
my kernel version is:
2.6.35.7-I8169XXLD8-CL1100997
[email protected] #2
SMP PREEMPT Tue Apr 24 05:35:29 KST 2012
and this is the Odin log
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I8160XXLD8_ready_to_root_ANT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> kernel.bin.md5
<ID:0/009> NAND Write Start!!
<ID:0/009> RQT_CLOSE !!
<ID:0/009> RES OK !!
<ID:0/009> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/009> Removed!!
Click to expand...
Click to collapse
your recovery cwm?
after flash this you see supersu?
Sent from my GT-I8160 using xda premium
Dr01nE said:
You have DXLK2 right? I created a package that won't increase your flash/custom binary counter (won't void warranty when you flash the package) using odin but its pretty big so if you know how to use Ubuntu 12.XX then you should try and do it on your own. The guide is found here: http://forum.xda-developers.com/showthread.php?t=1881964
Lastly, don't hesitate to ask questions.
Click to expand...
Click to collapse
done, i already try it but SU library seem not run normaly. what i mean is....i already flash as the guided in link above but after i flashing it download the superuser apk from market voila just WHiteScreen. then i try running su command from terminal emulator then nothing happen even the $ not change to #.
what i missed from that guided ? confusing.
trying maked another pre-rooted rom, right now i add superuser.apk inside then flashing it again but the same problem still happen.
What i missed again here ? i just copy paste the command.
Help me.......
Related
Originally Posted by corradokng View Post
For Root Follow Below:
THIS IS FOR ODIN
1. Flash This zimage-root-tar
2. Let Boot Loop Twice, you should see a fish.
3. Boot Back into Download Mode
4. Flash this. zImage-KG4.tar.md5
5. You should now have Root
6. Hit Thanks
Chadster your welcome to throw these instructions in the OP if you like.
I am most of the way done with the deodex on this, I will post a final in a day or so.
Credit to dsexton for finding original root zimage.
-----------------------------------------------------------------------------
after flashing this ROM to my phone i proceeded immediately with rooting using this method by the help of Odin v1.85. after passing through the first step(the fish logo) i proceed to the second one, and it failed it say:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> zImage-kg4.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> zImage
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
what will i do? Thanks!
Battery pull, put the phone back into download mode and try again.
Will try. BTW how long would i let the fugu bootloop? Thanks!
Sent from my SGH-T959V using XDA App
FBis251 said:
Battery pull, put the phone back into download mode and try again.
Click to expand...
Click to collapse
Already done that but it keeps on failing.
Sent from my SGH-T959V using XDA App
peterpandesal06 said:
Already done that but it keeps on failing.
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
What file are you trying to flash now? I mean, where did you download it from?
FBis251 said:
What file are you trying to flash now? I mean, where did you download it from?
Click to expand...
Click to collapse
i am currently flashing this one. zImage-KG4.tar.md5 from the attached link on the rooting instructions by corradokng. BTW are you using this ROM? and already have rooted it? can you teach me how did you root it please? Thanks Sir!
I Failed A Root Attempt (Power Failure Computer switched off during process) And My Phone Is Now Soft-Bricked.....
Im Trying to Flash Stock ROm using Odin, But When i get to The point Where It Reads "Getting PIT Map" or something Similar, My PC Goes into a Blue error Screen and Then Restarts Aborting The Process.....Havent Tried In Other PC Yet....
Please Help Me...!!
_________________________________________________________
No Worry I Got It, 4got to add the PIt file (nobody Mentioned IT Anywhere), now Dload Started (Hail Google)
_________________________________________________________
W8 Now my Cellphone Is Bootlooping Please Help Again......It can enter Download Mode But Cannot Enter Recovery Mode......
Firmware Used: DDKPH
[email protected] said:
I Failed A Root Attempt (Power Failure Computer switched off during process) And My Phone Is Now Soft-Bricked.....
Im Trying to Flash Stock ROm using Odin, But When i get to The point Where It Reads "Getting PIT Map" or something Similar, My PC Goes into a Blue error Screen and Then Restarts Aborting The Process.....Havent Tried In Other PC Yet....
Please Help Me...!!
_________________________________________________________
No Worry I Got It, 4got to add the PIt file (nobody Mentioned IT Anywhere), now Dload Started (Hail Google)
_________________________________________________________
W8 Now my Cellphone Is Bootlooping Please Help Again......It can enter Download Mode But Cannot Enter Recovery Mode......
Firmware Used: DDKPH
Click to expand...
Click to collapse
Dont flash pit file if u only have 1 package firmware file.
go find atleast 3 files package firmware and reflash. I dun know which is for DD...region, for me is DXKE1.
Pit file will repartition you phone, so you lost your recovery partition.
Sent from my GT-I9003 using Tapatalk
So, i put a ROM in it with 3 files with PIT, And Then i put the 1 file without PIT and re-partition unchecked...?? Correct.??
1 Q have i lost my USB Data by re-partitioning.?
Flash pit>boot to download mode>flash stock rom>done
Cheers
Sent from my GT-i9003 powered by VurrutRom
Getting this and a FAIL with red background and in phone download stuck at almost 100%
Flashing XXKPE.....
RE-trying download.....
Tried Checking Phone Bootloader Update....no progress......
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5 is valid.
<OSM> CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9003XXKPE_REV_00_CL1041909.tar.md5 is valid.
<OSM> GT-I9003-CSC-MULTI-OXAKPE.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> boot.bin
<ID:0/009> Sbl.bin
<ID:0/009> param.lfs
<ID:0/009> normalboot.img
<ID:0/009> boot.bin
<ID:0/009> Sbl.bin
<ID:0/009> param.lfs
<ID:0/009> system.rfs
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
u may also try 4 files of XXKPU firmware..
u can get the link in general section of galaxy sl under the general thread..
crk1995 said:
u may also try 4 files of XXKPU firmware..
u can get the link in general section of galaxy sl under the general thread..
Click to expand...
Click to collapse
isnt that russian firmware.?
Kpe should be ok. Try flash using diffrent odin version. Try v1.85, it is ok to me or v1.83 from sammobile.
If fail. Try use different usb port.
But first. Uninstall and reinstall the samsung driver.
Sent from my GT-I9003 using Tapatalk 2 Beta-4
Excluding the bootloader file...(XXKPE) dide the trick now my phone works....updating via Kies.....now
Flashable Firmware Packages for the Galaxy Y Pro GT-B5510 Enjoy !
Temporary if your phone is bricked: http://lmgtfy.com/?q=GT-B5510+Odin+firmware+download
you can find the firmware on google!
I will update this thread as soon as possible
GT-B5510 Odin firmware download
Tutorial:
1. Start ODIN
2. Turn of your phone so that to go to Download Mode. The download mode can be entered by pressing Volume down Key + OK button, and holding both simultaneously press the Power Button.
2. Choose PDA and select the downloaded File (SS_DL.dll not needed 'delete it')
3. Leave everything as it is and click 'Start'
4. On your phone follow instructions after flashing is complete
Odin download: Odin
Press thanks if it helped you Thanks in advance
fail!
Hi!
Thanks for the os!
I tried the tutorial above a couple of times but odin gets the following error:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> B5510XXKJ2_B5510OXAKJ2_B5510XXKJ2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> BcmCP.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have a galaxy y pro gt-b5510.
android version 2.3.6
basehand version b5510xxkj2
kernel version [email protected] #16
build number gingerbread.xxkj2
i've entered in download mode, the display confirmed with:
odin mode
product name: gt-b5510
custom bin down: no(0 counts)
current bin: samsung official
Downloading...
do not turn off target!!
any suggestions?
thanks!
who pass?
djbasspower said:
Hi!
Thanks for the os!
I tried the tutorial above a couple of times but odin gets the following error:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> B5510XXKJ2_B5510OXAKJ2_B5510XXKJ2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> BcmCP.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have a galaxy y pro gt-b5510.
android version 2.3.6
basehand version b5510xxkj2
kernel version [email protected] #16
build number gingerbread.xxkj2
i've entered in download mode, the display confirmed with:
odin mode
product name: gt-b5510
custom bin down: no(0 counts)
current bin: samsung official
Downloading...
do not turn off target!!
any suggestions?
thanks!
Click to expand...
Click to collapse
That's weird I got those form sammobile maybe that's the problem I think you need to use this tool in order to work: http://forum.xda-developers.com/showthread.php?t=1611225 I am sorry I tought these package were working but if no one passes then I need to remove this thread.
But anyway did you download my odin and followed my instructions 100%?
Also don't use PIT or tik anything else just do what I said in the tutorial
And sorry I added a line to tutorial forget to say that you need to enter download mode first but I think you did that ?
GianniDPC said:
Tutorial:
1. Start ODIN
2. Turn of your phone so that to go to Download Mode. The download mode can be entered by pressing Volume down Key + OK button, and holding both simultaneously press the Power Button.
2. Choose PDA and select the downloaded File (SS_DL.dll not needed 'delete it')
3. Leave everything as it is and click 'Start'
4. On your phone follow instructions after flashing is complete
Odin download: Odin
Click to expand...
Click to collapse
i did it exactly as above... fails to write every time
i tried with every usb port i have but it doesn't work...
djbasspower said:
i did it exactly as above... fails to write every time
i tried with every usb port i have but it doesn't work...
Click to expand...
Click to collapse
Ok do you have KIES installed if not Install it (Maybe reinstall it)
Make sure KIES is closed when ODIN is opened (another thing I recommend to do is go to recovery on your phone and wipe data factory reset and wipe cache) Then try again
Hi, i just bought a new Galaxy y pro.
I'm Italian and my current fimware is XXKJ4 ...
I want update it but kies doesn't find my phone, i try to reinstall kies, with another PC but is the same...
What is the lastest or the best firmware for this phone?
Also, when i try to flash with Odin, give me a FAIL
Please, help me ! thanks
I have the answer for the problem!
Ok everybody these firmwares are no ready to use with ODIN, that's the problem. You need to convert these KIES firmware to ODIN ready to flash files with Doky73's tool --> SplitFUS2 or request him the firmware in this threat.
And please don't forget to say thanks to Doky and me
Which ROM to use for a B5510 bought in Czech Republic?
djbasspower said:
Hi!
Thanks for the os!
I tried the tutorial above a couple of times but odin gets the following error:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> B5510XXKJ2_B5510OXAKJ2_B5510XXKJ2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> BcmCP.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have a galaxy y pro gt-b5510.
android version 2.3.6
basehand version b5510xxkj2
kernel version [email protected] #16
build number gingerbread.xxkj2
i've entered in download mode, the display confirmed with:
odin mode
product name: gt-b5510
custom bin down: no(0 counts)
current bin: samsung official
Downloading...
do not turn off target!!
any suggestions?
thanks!
Click to expand...
Click to collapse
I ran into this thread and tried the same thing. After much searching, I found references to this thread and/or this tool to use. It looks like the problem with this firmware is it is all in one package, and needs to be split. See the links below:
http://forum.xda-developers.com/showthread.php?p=26251171 - look at reply #6
http://fahmi1597.blogspot.com/2012/08/android-how-to-split-onepackage.html - how to split a .tar.md5 file into the subpackages, if it is all in one.
---------- Post added at 01:02 AM ---------- Previous post was at 12:29 AM ----------
pshaww said:
I ran into this thread and tried the same thing. After much searching, I found references to this thread and/or this tool to use. It looks like the problem with this firmware is it is all in one package, and needs to be split. See the links below:
http://forum.xda-developers.com/showthread.php?p=26251171 - look at reply #6
http://fahmi1597.blogspot.com/2012/08/android-how-to-split-onepackage.html - how to split a .tar.md5 file into the subpackages, if it is all in one.
Click to expand...
Click to collapse
I can confirm it works fine using Odinatrix (from the second link above. I used the firmware mentioned in this thread. (by the way, the OP didn't mention it is password protected - password is 'android'). I let Odinatrix split up the firmware - super easy to use, just follow the instructions in the second link above.
I then flashed CSC, MODEM, and PDA - nothing else. I didn't repartition - just left at auto reboot and f. reset time. Now flashed fine and is restarting.
AN ADVICE
Hello sir...maybe your tutorial will be better if you can give us some photos/ScreenShots of flashing steps...
:highfive:
aligh9 said:
Thanks a lot
This is what you wanted:
PDA: B5510JPLI1
PHONE: B5510XXLH3
CSC: B5510OJPLF1
Sent from my GT-B5510 using Tapatalk 2
Click to expand...
Click to collapse
@OP.. I am asking in place of him as he still doesnt have 10 posts to post here.. Can you please kindly upload U.A.E firmware B5510OJPLF1 which is available in samfirmware.com.. Thank you..
Sorry, but rom with Italian language ?
These firmwares are not flashable with Odin (Gives you an error) search the Internet for the right packages (you should succeed I fixed a friend his Galaxy Y Pro with that)
EDIT: I will try to update this thread even if I have a Xperia Mini now.
why is this in s5360 thread? :laugh:
zenxus31 said:
why is this in s5360 thread? :laugh:
Click to expand...
Click to collapse
well, you can report it..
Its in sgy section because all variants of sgy like duos , pro duos, pro come under sgy section.. so.. I guess it can be moved to duos development section.. but no harm if its here..
____________________________________
“If you wait to do everything until you’re sure it’s right, you’ll probably never do much of anything.” –Win Borden
i Tried flashing My galaxy Y pro with ODIN but it keeps Stucking i recovery img all the time, tried different ports and only 1 worked
is there any help ?
I did the verizon pushed update to 4.4.2 today on my SCH I535 S3 which was totally stock with encryption. After the install finished "upgrading apps" it then did a re-boot and asked for my encrypt pin then showed the outline Andy. Then after a couple of vibrations it re-boot again and will continue this cycle until battery is removed. After sitting on the phone for several hours and conversing with Samsung and Verizon they pointed me to Samsung Experience in a Best Buy and if that doesn't work I have to send it to Samsung for re-flash. They said they couldn't get their software to recognize my phone. The guy there recommended using odin to download a stock rom.
I have downloaded odin 3.07 and have downloaded a 4.3 stock rom. I set up odin with auto reboot and F. reset time checked and nothing else. I select the .tar.md5 in the bootloader and here is my odin output:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I535VRUCNC1_I535VZWCNC1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl2.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl3.mbn
<ID:0/004> aboot.mbn
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
My phone says:
ODIN MODE
PRODUCT NAME: SCH-I535
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
QUALCOMM SECURE BOOT: ENABLE
BOOTLOADER AP SWREV: 2
SW REV CHECK FAIL : Found 2 > Binary 1
Please tell me how to recover my phone. I am new to this so give me detail please.
I believe since u pushed the 4.4.2 ne1 update u need to Odin the 4.4.2 ne1 tar file, not the 4.3 file
Thanks so much! I tried the 4.4.2 tar file and... it worked. I thought that since the 4.4.2 update is what failed I'd have to go back to the 4.3 but that was clearly flawed thinking on my part. I can't believe that it worked and best of all everything is still there! I still have all my apps and data, as if nothing at all happened.
Thanks so much for your suggestion!
4theluvof2 said:
Thanks so much! I tried the 4.4.2 tar file and... it worked. I thought that since the 4.4.2 update is what failed I'd have to go back to the 4.3 but that was clearly flawed thinking on my part. I can't believe that it worked and best of all everything is still there! I still have all my apps and data, as if nothing at all happened.
Thanks so much for your suggestion!
Click to expand...
Click to collapse
No problem!! Glad it worked, hit that thanks button if you don't mind!
SCH-I535
hey did you get back on 4.3 or not???? plz if u did then refer me link plzzzzzzzz
hammadsalik said:
hey did you get back on 4.3 or not???? plz if u did then refer me link plzzzzzzzz
Click to expand...
Click to collapse
No I didn't get the 4.3 working. I did get the 4.4.2 working though. I am not sure how exactly you'd revert back to an older version, Sorry.
Dear users of XDA,
I've used to flash quite alot. Starting with my HTC HD2, then with the Lg Optimus and so forth.
But I came across an deadlock where all my skills failed me, no matter how much research I did.
So, here's a briefe explenation of what happened so far:
1.: I tryed to flash an custom recovery via Odin. Couldn't install it because of an issue with the PIT, wen't ahead and got one from XDA.
After that, everything went to hell. I couldn't boot anything, only the download-mode. So I downloaded an official Firmware from SamMob (chose carefully the proper one) and was even able to get an success via odin. But then, the first boot went straight into Download-Mode and that pretty much concludes the tight spot I'm currently in.
2.: I tryed to install desperatly a custom recovery but failed right after the img part.
3.: I tryed instaling to install other firmwares from SamMob but to no avail. - It always failed in Odin at the NAND write fail.
4.: I tryed different recoverys and PITs but then again to no avail.
I wanted to use this tab for my rather long way to work and spend what little savings I had as apprentice.
But with my lousy wage, I promise to donate something to the one who's willing to help me in my stupid and nerve-wrecking odyssey.
Best regards,
Zakkusu
PS: I seriously believe the main issue lies within that NAND Write error. (example of odin from previouse attempts)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P600XXUDOJ3_P600DBTDOK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Nand write fail. Search the forum multiple posts .
In your case reads as Nand. Damaged .
Sent from my SM-N930F using XDA-Developers mobile app
JJEgan said:
Nand write fail. Search the forum multiple posts .
In your case reads as Nand. Damaged .
Sent from my SM-N930F using XDA-Developers mobile app
Click to expand...
Click to collapse
What exactly do you mean with NAND damaged? Is it something beyond repair?
I haven't yet found something during my forum search. But thank you for taking your time to awnser!
Nand is the flash memory os is written to .
search
http://forum.xda-developers.com/search/forum/1737?query=nand