xoom mz601
after rooting and installing eos 2 lost 3g
tried multipke valid sims that worked in the xoom prior, and also work in other devices
when doing a scan network it picks up all avail networks however it cannot attach.
status shows:
Network : vodafone
Signal Strength -77dBm 18 asu
Mobile Network Type: Unknown
Service Status: Out of service
Mobile network state: Disconnected
MDN: Unknown
IMEI: some numbers
IMEI SV: 88
tried returning to stock rom, no luck...
any help would be appreciated
Related
Hi, I don't know what the hell has happened to this phone but after looking at it I can see there is no IMEI, no APN settings and no signal.
The phone has recently been unlocked from Orange to allow the use of an O2 Sim card. Using one of those internet unlock sites. It has been working fine for the past 2 weeks since unlock.
I don't really know what information to give;
Signal: red circle bar
APN: empty, I tried to add an APN to the list but it would not save. It just goes back to an empty screen.
Network: unknown
signal strength: 0dBm 0asu
mobile netowrk type: unknown
service state: out of service
mobile network state: disconnected
IMEI: Unknown
IMEI SV: Unknown
Any help would be awesome
jollyrogue said:
Hi, I don't know what the hell has happened to this phone but after looking at it I can see there is no IMEI, no APN settings and no signal.
The phone has recently been unlocked from Orange to allow the use of an O2 Sim card. Using one of those internet unlock sites. It has been working fine for the past 2 weeks since unlock.
I don't really know what information to give;
Signal: red circle bar
APN: empty, I tried to add an APN to the list but it would not save. It just goes back to an empty screen.
Network: unknown
signal strength: 0dBm 0asu
mobile netowrk type: unknown
service state: out of service
mobile network state: disconnected
IMEI: Unknown
IMEI SV: Unknown
Any help would be awesome
Click to expand...
Click to collapse
im having the same problems but i managed mine to detect and display my network name but still no signal
i am seeing my imei and imeisv (20)
dial this on the dialer *#*#4636#*#* and in that settings go to phone info scroll all the way down make sure radio is on
and select gsm only but thats as much as i can come up with im stuck still with signal strength 0 dbm 0 asu
ok i was doing some reading. and i found it to be possible that the phone doesnt have the apn settings for all networks in built, so putting in your current carriers apn settings manually should work, im going to try this to see if it works, i just saw the part where you said you tried this but it wouldnt save, still going to give it a shot, mine was also unlocked from orange to use on digicel jamaica networks and it worked for about 2 weeks, then BAM! red anti circle for signal or circle with slash through it or cancel icon. and nooooo signal none whatsoever. but with the *#*#4636#*#* settings i managed to get it to display my carriers name when i drag the notifications menu down. i dont know if flashing the radio will fix this but i was told this moto cliq has the latest radio already. still searching for solutions
this problem is all over with 0 solutions lol
http://android.modaco.com/content/h...ock-phone-with-code-and-now-no-sim-card-work/
I managed to solve the problem a couple of weeks after making the thread by simply rooting it and installing a custom ROM, I think it came with a radio flash as well but can't remember. It's my sisters phone and it seems as though she hasn't had any problems with it since then so all is good.
jollyrogue said:
I managed to solve the problem a couple of weeks after making the thread by simply rooting it and installing a custom ROM, I think it came with a radio flash as well but can't remember. It's my sisters phone and it seems as though she hasn't had any problems with it since then so all is good.
Click to expand...
Click to collapse
post the radio and rom you used mate, share the wealth.
Today I tried putting CM12 on my Moto G(xt1034) and I realized that you needed to install CM11 first then CM12. I tried to reset to stock firmware which I did and now I have no service and my phone shows as xt1032. Im with wind mobile and I don't think I got the AWS Xt1034 stock firmware and that's why im getting no service.
In status it says
Network - Unknown
Signal strength - 0dBM 99 asu
Mobile network type - Unknown
Service state - Voice: Radio off / Data: Radio off
Roaming - Not roaming
Mobile network state - Disconnected
My phone number - (it shows my number)
If someone could give me help on how to get my service back as no one can reach me at all that would be great...
I have the same problem
Hello, a few days ago I posted here asking for help with a problem my phone had but I resolved it and now my phone is back to normal but for some reason my phone won't connect to my mobile network as in the phone company I went to the status section in the settings of my phone and this is what is shows:
Network - Unknown
Signal strength - -98 dBm 1 asu
Mobile network type - CDMA - EvDo rev. A
Service state - In service
Roaming - Roaming
Mobile network state - Disconnected
Balthizar01 said:
Hello, a few days ago I posted here asking for help with a problem my phone had but I resolved it and now my phone is back to normal but for some reason my phone won't connect to my mobile network as in the phone company I went to the status section in the settings of my phone and this is what is shows:
Network - Unknown
Signal strength - -98 dBm 1 asu
Mobile network type - CDMA - EvDo rev. A
Service state - In service
Roaming - Roaming
Mobile network state - Disconnected
Click to expand...
Click to collapse
From your dialer, dial the following...
##72786#
This will reprogram your device...should this not do the trick contact your service provider and talk technical support.
I dialed ##72786# and nothing happened
I am new to rooting. After over 2 days of unsuccessfully trying to install android 4.4.4, I finally did using clockwork and nightly's 11 cyanogen kitkat mod with gapps. I have a Huawei Ascend Y300. My mobile network, before rooting (?) was Bell [Canada]. Now, it doesn't seem like I can connect to mobile networks like before. I cannot send nor receive texts and calls, making things very difficult. I'm definitely new to rooting, so I have no idea what the language of this business is. I really do not want to have to go back to factory resetting because getting 4.4.4 to work was the biggest pain I've had to deal with yet with my phone, as it soft bricked and everything.
I'm not on a data plan, so it's not like I use my phone for its own wifi, but just the regular connection for texting/calling doesn't work. I think this feature was unavailable to me sometime after I rooted my phone. The mobile network became unavailable (I think) sometime between it being rooted, but definitely before it was upgraded to 4.4.4.
How can I fix this problem?
Below is my phone's status. Note that the Imei is available, but the parts that include mobile networks are unavailable.
Battery Status: Not charging
Battery Level: 21%
Network: Unknown
Signal Strength: 214783647 dBm 255 asu
Mobile network type: Unknown
Service Status: Out of service
Roaming: Not roaming
Mobile Network State: Disconnected
My phone number: **********
IMEI: ****************
IMEI SV: **
IP address* **********************************
Wi-Fi MAC address: **************
Bluetooth address: unavailable
Serial number: ************
Hi
Thanks for writing to us at XDA Assist. Exactly which ROM did you flash? Where did you find it? Please provide a link.
No response in two days, thread closed.
Guys I clean flashed viper os 7.1.2 after lineageos 14 and now dont have 3g/4g. Calling and texting works fine.Apn is already set to what it needs to be, also set default network to lte only but still no help, it gives me sthis error after testing lte from that code to check phone status, PLEASE HELP ME, should I try installing another rom?
That error:
Signal strength: -92 dbm 48 asu
Data service: disconnected
Voice network type: lte
Data network type: lte
Voice call status: idle
Set preferred network type: LTE only