Hi all.
Sorry if this has been covered.
As the title States my touch screen doesn't respond after waking the phone with the power button. I have had this issue on miui, viper and aosp.
Also occurs from time to time when I recurve a call or my alarm is going off.
Any assistance would be awesome.
Sent from my One X using xda app-developers app
wyd4 said:
Hi all.
Sorry if this has been covered.
As the title States my touch screen doesn't respond after waking the phone with the power button. I have had this issue on miui, viper and aosp.
Also occurs from time to time when I recurve a call or my alarm is going off.
Any assistance would be awesome.
Sent from my One X using xda app-developers app
Click to expand...
Click to collapse
EXACTLY the same problem!! I noticed that when the phone is in idle, if i try to unlock or answer a call, the screeen is showing but the touch don't respond. As i measured, it needs 30 seconds to became active. It is very annoying.
Please, if somebody have some answer please tell us.
Thanks
ZTE Grand X In.
Do you have s2w enabled? Also overclocking? Undervolting?
Sent from my HTC One XL using xda app-developers app
area51avenger said:
Do you have s2w enabled? Also overclocking? Undervolting?
Sent from my HTC One XL using xda app-developers app
Click to expand...
Click to collapse
+1. The more info you provide the more help you'll get. If you're using elemental you're automatically undervolted - 25 so going any lower may result in some instability. Also I found with sweep2wake I would get an unresponsive screen approximately 1 out of 10 unlocks so I disabled it. Smooth sailing since.
I had those problems with kernel mods under volting cause death sleep.
Sent from my One X using xda premium
So has anybody found the solution? I am also experiencing this problem on my ZTE Grand x IN. When I enable 'Keep WiFi on during sleep', when I press power button, I am not able to unlock the phone since the display does not respond. It takes some time (
less than minute), and after that it is ok. Also, I cannot answer the call sometimes. When I turn off the option that I mention previously, the problem is gone, but my whatsapp, facebook, yMail and etc... does not receive data!!
phikret said:
So has anybody found the solution? I am also experiencing this problem on my ZTE Grand x IN. When I enable 'Keep WiFi on during sleep', when I press power button, I am not able to unlock the phone since the display does not respond. It takes some time (
less than minute), and after that it is ok. Also, I cannot answer the call sometimes. When I turn off the option that I mention previously, the problem is gone, but my whatsapp, facebook, yMail and etc... does not receive data!!
Click to expand...
Click to collapse
Do you have a one xl??
Sent from my HTC One X using xda app-developers app
No I am using ZTE grand X In. Sorry if I posted (probably did ) in wrong forum. That was my first post. I hope the problem is related to Android itself. If you know where is the simillar topic for ZTE please guide me!
Just create a new post in zte q&a?......
Sent from my One X using xda app-developers app
Related
Forgive me if this has been asked before, but I couldn't find anything related to my issue. I'm trying to get BLN Notification lights to work on my Nexus S, and I've already tried a few kernels, netarchy, matr1x, and trinity, but they all have the same result. The light shows up for one or two seconds, then it turns off. I've also tried the SuperOSR rom and the same thing happens. I'm currently using MIUI.us 1.9.16. Is this how it's supposed to be? Any suggestions?
PS, a couple times, it did stay on (until I turned the screen on), but it is not consistent.
Thanks.
OhOne said:
Forgive me if this has been asked before, but I couldn't find anything related to my issue. I'm trying to get BLN Notification lights to work on my Nexus S, and I've already tried a few kernels, netarchy, matr1x, and trinity, but they all have the same result. The light shows up for one or two seconds, then it turns off. I've also tried the SuperOSR rom and the same thing happens. I'm currently using MIUI.us 1.9.16. Is this how it's supposed to be? Any suggestions?
PS, a couple times, it did stay on (until I turned the screen on), but it is not consistent.
Thanks.
Click to expand...
Click to collapse
Do you have the bln pro app from the market?
if the skies the limit, where's the urgency?
Nope, but I do have the free version installed.
Urgency? No urgency... Did I do something wrong? :S
Yep
Wrong section hehehe
Sent from my HTC Sensation 4G using XDA App
Sorry... -.- Anything I can do to fix it?
OhOne said:
Sorry... -.- Anything I can do to fix it?
Click to expand...
Click to collapse
You need the pro version to edit the settings.
if the skies the limit, where's the urgency?
Nah don't worry, a mod should move it anyways
Sent from my HTC Sensation 4G using XDA App
Alright, thanks.. Sorry about this..
It should still work even with the free version shouldn't it?
Hmm, I thought the blinking can only be accomplished with the pro version... Can someone attest to this plz?
Sent from my HTC Sensation 4G using XDA App
Actually, I don't want it to blink. I'm fine with just the static light, and the problem is that the light does not stay on. I understand that the static light is available for the free version and blinking requires the pro version.
mathkid95 said:
Hmm, I thought the blinking can only be accomplished with the pro version... Can someone attest to this plz?
Sent from my HTC Sensation 4G using XDA App
Click to expand...
Click to collapse
It's not blinking that he's talking about. For me I get a notification then the BLN turns on, 2 seconds later it turns off. If I wake the display without unlocking the phone then turn the display off again the BLN will turn back on and stay on indefinitely. But the initial BLN only lasts 2 seconds.
I'm also on the Free version.
Sent from my Flashback HC-TAB using XDA Forum App
barqers said:
It's not blinking that he's talking about. For me I get a notification then the BLN turns on, 2 seconds later it turns off. If I wake the display without unlocking the phone then turn the display off again the BLN will turn back on and stay on indefinitely. But the initial BLN only lasts 2 seconds.
I'm also on the Free version.
Sent from my Flashback HC-TAB using XDA Forum App
Click to expand...
Click to collapse
Yup, that's exactly my situation. I also noticed that after it turns off, and you tap it, it'll stay on.
OhOne said:
Yup, that's exactly my situation. I also noticed that after it turns off, and you tap it, it'll stay on.
Click to expand...
Click to collapse
I didn't notice that but same here! Tapping it after it turns off does indeed turn it back on indefinitely. I'm on the latest TEUV kernel btw.
Sent from my Flashback HC-TAB using XDA Forum App
Ah, I hope someone has found a solution or or knows the cause of this bug(?)..
---------- Post added at 11:03 PM ---------- Previous post was at 11:01 PM ----------
barqers said:
I didn't notice that but same here! Tapping it after it turns off does indeed turn it back on indefinitely. I'm on the latest TEUV kernel btw.
Sent from my Flashback HC-TAB using XDA Forum App
Click to expand...
Click to collapse
Ah yes, I've tried the latest TEUV kernel for MIUI as well, but no dice. Even on a fresh install.
Yes I hope someone can chime in and help us out here lol
Sent from my Google Nexus S using xda premium
Hahaha, that's funny, my problem is that it stays on, I don't like BLN
And I don't feel like downloading the app to turn it off ^^
Maybe it has something to do with bld?
Sent from my Nexus S using XDA App
dario3040 said:
Hahaha, that's funny, my problem is that it stays on, I don't like BLN
And I don't feel like downloading the app to turn it off ^^
Click to expand...
Click to collapse
Lol I wish I had your issue. Only reason I like BLN is because I can make my phone not wake up when receiving a notification and instead just display the backlights. Saves on battery I think.
Sent from my Flashback HC-TAB using XDA Forum App
Isn't mathkids kernel bln baked in so it works without a program? It shouldn't be the apps problem if it wont work on matrix. Check any scripts you have running that will interfere
sent from my nexus s on a kang from simms
Have the same problem ever since using MIUI..
anyone got a fix?
EDIT
Guys i found the fix from a fellow XDA member here.
You need to enable LED from settings, personal, LED settings.
Strange since i thought those settings attained only to phone with dedicated LED's, but apparently not!
HTC ONE XL
Hi Guys,
Have been following XDA for years since been with android and have been flashing my phones and others since. This problem i have not occured before and have only been experiencing since my last 2 flashes.
My day to day usage;
Listen to music 10 hours everyday, maybe more with headphones even while working.
Battery will last a good 20+hours maybe more
Play games and such and maybe make a few calls or sms thru out day.
every now and then when i unlock to maybe change song both touch screen and touch buttons will not repsond. I turned off and on swipe to unlock and still receive this bug every now and then. Not often but its a pain because it requires a hard reset.
Currently using Jelly bam with rohan kernal v6. I moved from m1KingKang. Both flashes have been fresh. including system wipe. these 2 are the only roms ive had this happen.
i have looked at other threads for other phones and they all say there is a problem, somthing wrong with the phone. I have had other roms where this does not happen.
My clock speed is set as min 500mhz and max 1700mhz
Are you using s2w. Are you under volting?
Sent from my HTC One XL using xda app-developers app
area51avenger said:
Are you using s2w. Are you under volting?
Sent from my HTC One XL using xda app-developers app
Click to expand...
Click to collapse
Hey mate,
i am not using s2w, still happens regardless whether on or off because the touch buttons also tend to not respond. Music still continues to play, volume and everything is fine. Touch screen just stops thou.
I have not changed any voltages.
SIO - intellidemand am using.
Hey! I have a small problems or others might have it too, that is when I flash the Rom fresh the viberation feedback when typing is perfect but after sometime it goes away and in the settings to activate it is also frozen.
Posting a pic here too
Can anyone please help since I'm new to this and can't post in the dev forum.
Sent from my HTC One X using xda app-developers app
ZayedQamer.zq said:
Hey! I have a small problems or others might have it too, that is when I flash the Rom fresh the viberation feedback when typing is perfect but after sometime it goes away and in the settings to activate it is also frozen.
Posting a pic here too
Can anyone please help since I'm new to this and can't post in the dev forum.
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
I think power saver will disable vibration.
Yup, that did it for me! Thank you!
Sent from my HTC One X using xda app-developers app
viper xl 3.2.7 bluetooth disconnecting when phone sleeps
About 5 minutes after my screen turns off/sleeps, my Bluetooth turns off. As soon as I wake the phone, it re-connects. I had the same problem with Bulletproof 1.3 and Elemental 6.5. I reflashed the kernels a couple of times, and the Rom as well. I did a complete wipe before flashing. I have used Viper in the past, but never encountered this problem. I have been on ICS till now, but was lured back to JB now that the mass storage mess has finally been conquered. Any suggestions on how to fix the Bluetooth?
Hello everyone,
So i bought a one X a couple months ago and it already came with a custom rom, i removed that and installed the Team Viper rom and currently have the latest version installed (April 10). The phone screen will not turn on during a call if you move the phone away from your ear like it should, the only way to get it to turn on is by pressing the power button and even then it only stays on for a few seconds and then turns right back off. Im not sure if this worked before i installed Viper. Any suggestions guys?
Joe-Pk said:
Hello everyone,
So i bought a one X a couple months ago and it already came with a custom rom, i removed that and installed the Team Viper rom and currently have the latest version installed (April 10). The phone screen will not turn on during a call if you move the phone away from your ear like it should, the only way to get it to turn on is by pressing the power button and even then it only stays on for a few seconds and then turns right back off. Im not sure if this worked before i installed Viper. Any suggestions guys?
Click to expand...
Click to collapse
Do you have a case? Try placing a call and use your finger to left of the AT&T logo. I don't know much about viper but could be a setting (usually accessibility) that does that.
Sent from my Carbon-ize Evita using xda-developers app
You can also try calibrating g sensor.
Settings-Display and Gestures- G Sensor
Sent from my HTC One X using xda premium
Herc08 said:
Do you have a case? Try placing a call and use your finger to left of the AT&T logo. I don't know much about viper but could be a setting (usually accessibility) that does that.
Sent from my Carbon-ize Evita using xda-developers app
Click to expand...
Click to collapse
I tried both of the suggestions from you guys and none of them work. I tried doing a full wipe and re installing the viper rom but no success...anything else?
Have you set a security lock for the home screen?
Sent from my HTC One X using xda premium
Venomtester said:
Have you set a security lock for the home screen?
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
also is there a screen timeout? and im sure android has a feature where you can hang up using power button...again i am not sure about viper, but if you go to settings > accessbility > and make sure certain things are not checked, that can help...if that doest work, then your proximity sensor could not be working...does your auto brightness adjust accordingly?
Herc08 said:
also is there a screen timeout? and im sure android has a feature where you can hang up using power button...again i am not sure about viper, but if you go to settings > accessbility > and make sure certain things are not checked, that can help...if that doest work, then your proximity sensor could not be working...does your auto brightness adjust accordingly?
Click to expand...
Click to collapse
Venomtester said:
Have you set a security lock for the home screen?
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
There is no security lock for the homescreen, the auto brightness also works perfectly. I cant find anything in accessibility the only thing checked off is auto rotate screen. I think it may be the proximity sensor then because the digitizer on the phone looks like it was replaced.
The only other thing that I can think of is a screen protector that is blocking it or it has smudges that need to be cleaned. They have apps that calibrate proximity sensors but I have never used them.
Sent from my One X using xda premium
Venomtester said:
The only other thing that I can think of is a screen protector that is blocking it or it has smudges that need to be cleaned. They have apps that calibrate proximity sensors but I have never used them.
Sent from my One X using xda premium
Click to expand...
Click to collapse
I seen those up here. Search the forums or play store. Is the auto brightness using the same sensor or is it two? Tried looking, but can't tell.
Sent from my Carbon-ize Evita using xda-developers app
I believe it is two. If both auto brightness and proximity were running off the same sensor, they would both act up. I think. Just a theory. But if it is one sensor then the calibration app should work.
Sent from my One X using xda premium
Venomtester said:
I believe it is two. If both auto brightness and proximity were running off the same sensor, they would both act up. I think. Just a theory. But if it is one sensor then the calibration app should work.
Sent from my One X using xda premium
Click to expand...
Click to collapse
It would make sense to be two. But who knows?
anyone else have an issue where when in dialer and they press the button to go to the number screen they have to press it twice. Everytime I press it, it opens a blank screen and I have to back out then press it again to make the numbers appear. This is between 2 nexus 5's now. My replacement does the same thing. I thought it was a glitch from romming my phone but since google sent me my new one it does it to on stock rooted rom.
Also When I unplug my headset it goes straight to speaker mode and I have to press the button twice to turn it off. Also between 2 phones.
Just want to know if this is an issue for most or just me, and it would be weird its happening with both phones. Thanks
Yes mine does it too. Annoying bug for sure.
Sent from my HTC Desire using XDA Free mobile app
350Rocket said:
Yes mine does it too. Annoying bug for sure.
Sent from my HTC Desire using XDA Free mobile app
Click to expand...
Click to collapse
thanks, just glad to know Im not alone. Sure L will fix this. I would install another dialer but its one of those things I like to just be stock
This happens to me when I turn off animations in Developer Options.
That explains it because I always disable animations. Thanks.
Sent from my HTC Desire using XDA Free mobile app
Wakamatsu said:
This happens to me when I turn off animations in Developer Options.
Click to expand...
Click to collapse
Awesome, Ill try that because I usually disable them as well.
Thanks