I just purchased a used HTC One X from the Rogers network and unlocked it. Before rooting it, on the Sense rom WiFi was working great. Very strong signal and it never dropped. Upon flashing CM10, it's not picking up my home network (which I know is working because I'm typing on it right now and the device was connecting to it earlier).
I downloaded WiFi analyzer and it's jumping between networks, some networks pop up and then disappear and then new ones pop up. WiFi is just acting very strange. I did all the appropriate wipes before flashing.
I found a lot of WiFi issues surrounding the international One X but I don't think this is a defect since it was working fine with Sense.
Does anyone else have any experience with this?
Thanks!
Just flashed back to a Sense rom, and low and behold my WiFi is working properly again.
I've had the same experience with CM10 (different nightlies) and AOKP, WiFi is just not reliable. I can connect just fine and the signal strength is the same as with Sense (including CleanROM) but at random times transfer speeds will go down or just drop completely, usually turning WiFi off and on fixes it but it happens again within a couple of hours.
I've tried a couple of tips from those threads like turning off the 5GHhz radio on my router but that doesn't seem to help
fabiancalvo said:
I've had the same experience with CM10 (different nightlies) and AOKP, WiFi is just not reliable. I can connect just fine and the signal strength is the same as with Sense (including CleanROM) but at random times transfer speeds will go down or just drop completely, usually turning WiFi off and on fixes it but it happens again within a couple of hours.
I've tried a couple of tips from those threads like turning off the 5GHhz radio on my router but that doesn't seem to help
Click to expand...
Click to collapse
I can't even detect my home network. There's a few of the neighbors networks that pop up on and off but it's not consistent.
I'm literally sitting on my workstation which is connected to my home network and I have full bars. On Sense, I also get full bars and WiFi works as expected.
TotalCrisis said:
I can't even detect my home network. There's a few of the neighbors networks that pop up on and off but it's not consistent.
I'm literally sitting on my workstation which is connected to my home network and I have full bars. On Sense, I also get full bars and WiFi works as expected.
Click to expand...
Click to collapse
I've had troubles as well with WIFI on my device running CM10. I've posted numerous time to the CM10 dev forum but nothing comes from it at all. I had very good wifi with the Oct nightlies but now my Wifi is chocked off and doesn't perform as expected. I've tried rebooting my modem, router, switch everything and still the same results. Is there anyway to bring some attention to this or figure out the problem?
Help others and myself figure this problem out, anyone?
beankid said:
I've had troubles as well with WIFI on my device running CM10. I've posted numerous time to the CM10 dev forum but nothing comes from it at all. I had very good wifi with the Oct nightlies but now my Wifi is chocked off and doesn't perform as expected. I've tried rebooting my modem, router, switch everything and still the same results. Is there anyway to bring some attention to this or figure out the problem?
Help others and myself figure this problem out, anyone?
Click to expand...
Click to collapse
Are you on the stock kernel for CM10? Try flashing another kernel. It could be a kernel issue that you're having. I had this problem When I flashed PACman, and all i did was just flash Rohan's Build 5 and now my WiFi is working just fine.
Myrder said:
Are you on the stock kernel for CM10? Try flashing another kernel. It could be a kernel issue that you're having. I had this problem When I flashed PACman, and all i did was just flash Rohan's Build 5 and now my WiFi is working just fine.
Click to expand...
Click to collapse
I'll download rohans kernel as I've been using the built-in Kernal with that comes with CM10.
**Edit: I've installed RoHan's kernel but still the results are the same. The wifi and network become grayed out from time to time and websites fail to load. I know my home connection isn't quite that fast but there is no reason that the connection all together would drop.
my wifi icon on cm10 just turns grey after a while and doesn't receive any data. So i have to toggle it off and then on again to get it to work again
Sent from my One X using Tapatalk 2
The CM10 stable rom is out for the LTE One X. I'm going to give it a go and see if any thing changes.
Check your region code under Wifi -> Menu -> Advanced Settings -> Region Code
Make sure it's under US (or wherever you are), reboot and see if that helps.
stnguyen09 said:
Check your region code under Wifi -> Menu -> Advanced Settings -> Region Code
Make sure it's under US (or wherever you are), reboot and see if that helps.
Click to expand...
Click to collapse
I'm located in Canada, and I've tried setting it to US and Canada. No dice.
I tried the a different kernel, CM10 nightly, CM10 stable, AOKP, and none of them are working.
I'm having a similar problem. My wifi won't turn on for some reason. It's related to the phone hardware, not my network. And I'm only seeing this problem when flashing the most recent nightly of CM10.
I'm not sure what else to try. Any ideas?
I've tried rohan's kernel as well as setting the region for the WiFi adapter but eventually it happens again. It's not as bad as some of the other posts I've seen, but it does kill data through WiFi at some point and transfer speeds drop.
Is there anyway to get further data on this? I know that my phone doesn't have the hardware "bug" first reported with a few of the devices. Any logs or error reports we can try and gather?
I managed to connect to my home wifi which I was previously unable to connect to, I had to change my router's wireless signal channel from 13 to 1. I am able to hold a signal fine, however I know many of my neighbors networks are not showing up like they should. Similarly, I am also unable to pick up my university network at school.
As I've said, Wifi works fine on Sense.
Is there any way I can help with error reporting in any way? I don't mind donating a bit of money to the CM team and help them get some logs.
It's nice to know I'm not the only one affected.
I would have to say this is completely a Kernel problem. I am having a similar issue in cm10 on N7000. But it's only happens to the some of the routers.
My house's router is a d-link product. And when you are connected you will having no issue, but once you restarted your phone you are getting trouble to reboot the router once to get your self connected again, in the phone, the wifi will stating "Connecting" like forever.
But I am not getting the same trouble when I am with my company's wifi and the Wifi of my friends lynsys. So its hard to tell the developer about this issue because it's not happens to all people. I hopes this info helps. Reboot the router usually works for me.
Sent from my GT-N7000 using Tapatalk 2
yiwsg said:
I would have to say this is completely a Kernel problem. I am having a similar issue in cm10 on N7000. But it's only happens to the some of the routers.
My house's router is a d-link product. And when you are connected you will having no issue, but once you restarted your phone you are getting trouble to reboot the router once to get your self connected again, in the phone, the wifi will stating "Connecting" like forever.
But I am not getting the same trouble when I am with my company's wifi and the Wifi of my friends lynsys. So its hard to tell the developer about this issue because it's not happens to all people. I hopes this info helps. Reboot the router usually works for me.
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Unfortunately it's not always possible to reboot the router.
Like I said, I can confirm this issue and anything I can do to help I will try to provide.
These issues with CM10 and the new AOSP will almost make me *shutter's to think this thought* move back to sense.....I'm just not sure what to do. Should we link this to the dev thread?
Edit: I've captured a logcat from me turning on wifi, connecting to a website, and loading a second website to see the behavior. PM me if this would be of use.
This is the only reason I'm using a Sense-based ROM (CleanROM), nightly builds for CM10 run great and I have no other issues, but this one is kind of a deal-breaker for me.
beankid said:
These issues with CM10 and the new AOSP will almost make me *shutter's to think this thought* move back to sense.....I'm just not sure what to do. Should we link this to the dev thread?
Edit: I've captured a logcat from me turning on wifi, connecting to a website, and loading a second website to see the behavior. PM me if this would be of use.
Click to expand...
Click to collapse
Would it be possible for us to get in contact with a developer?
How would I go about getting a logcat of my own?
fabiancalvo said:
This is the only reason I'm using a Sense-based ROM (CleanROM), nightly builds for CM10 run great and I have no other issues, but this one is kind of a deal-breaker for me.
Click to expand...
Click to collapse
I feel you man. I'm sticking with AOSP because I managed to at least get my home network working but it's definitely annoying not being able to get onto my university network.
Related
Anyone else running into issues using wifi with alpha7.1? For some reason i can see networks but I am unable to connect to them.
Well I fixed it. Just reinstalled and made sure I cleared out everything.
Sent from my HTC One S using XDA
just sayin
CM9 looks nice. I wish there were more developers helping each other for CM9, instead of 10+ similar ROMs. Big THANKS to the team though.
xkonny is my role model
Scratch That
Ok it seems that i'm only having issues connected to my home network.
I've tried pretty much everything.
I've tried connected to it with no password no encryption and it still won't connect.
IT does connect to other networks so I'm wondering if it might be a setting that i might have to change.
Can anyone shed any light on this subject?
Even with the newer builds (currently running the latest nightly) I am still unable to connect to my home wifi network.
Currently I am using the Clear Hub Express
http://www.clear.com/support/download/modem/clear-hub-express
I don't know why cm9 won't connect. The stock rom does.
I am able to connect to every other wifi network i come across (work, friends houses).
Anyone got any bright ideas as to whats going on?
Im actually having the same problem. The only thing i can think is it is something to do with the Clear network. I too have a Clear modem, and with CM9/ AOKP Romson the One S I cant connect to my home WIFI. Can connect to others just fine. Glad to see some else has the problem and im not crazy. But i definitely think it has something to do with Clear being as we both are having the identically same problem. Let me know if you come up with anything.
Oh and do you have this problem on Sense 4.0 ROMS? I do not. Which makes it even weirder!
Nope the sense romantic work fine. I'm gonna hook up an old wireless router I have and see if it works
Sent from my HTC One S using XDA
I have a feeling it will work. I was gonna do the same. Let me know how you fare.
ive been posting this bug ive found all over but no one seems to have any ideas on how to fix it as it doesn't appear to effect many users. the issue is on any aosp based rom: cm10, aokp, slimbean, liquid..etc i get wifi errors such as wps failed and my router is out of range. this happens until i toggle off wifi and turn it back on. i always do fresh, clean install with full wipes before i flash the rom & gapps. ive tried everything including all different kernels to no avail. i know my router is ok because once i go back to any ics rom or jellywiz the wifi works fine. to me this sounds like a aosp kernel or wifi driver issue. how can i get this reported or looked into? as of now i know this effects myself and one other user ive talked to and he is stumped as well. i have a netgear wireless g router in case anybody wondered, current firmware as well. the devs ive reported this too seem to be ignoring my posts.
i seriously want to use one of the aosp roms but i cannot right now and it's driving me mad. any help or insight would be greatly appreciated.
ill also add i tried changing to different security settings on my router to no avail.
What router does this other user use? The one you said has the same issues. Similar to yours?
I don't use my phone on wifi very often so I dunno, but if he has one similar to yours I would say there's a problem with that router liking AOSP ROMs.
Its a netgear wireless g. He said he has a wireless n. If its the router, why does every ics rom work? Never heard of a router disliking aosp lol. Im wondering if the problem is using the newest clockworkmod touch recovery? Im just trying to troubleshoot. Ive tried everything else tbh. Never had a phone puke when trying aosp and i mean any aosp rom.
Doesnt anyone else use netgear routers?
fix-this! said:
Its a netgear wireless g. He said he has a wireless n. If its the router, why does every ics rom work? Never heard of a router disliking aosp lol. Im wondering if the problem is using the newest clockworkmod touch recovery? Im just trying to troubleshoot. Ive tried everything else tbh. Never had a phone puke when trying aosp and i mean any aosp rom.
Doesnt anyone else use netgear routers?
Click to expand...
Click to collapse
Someone fixed wifi with DNS server change. Don't know if it was same problem.
Speaking of dns i do use opendns on my pc. Just darn weird ics doesnt act up for me.
ICS has code made directly for our device/radios because that's what comes on our phones. Jelly bean, which all AOSP ROMs are based from, doesn't have any code made directly for ours. All the developers have ported it over to our devices and it will be imperfect until Verizon jelly bean comes out/gets leaked.
Brian Gove said:
ICS has code made directly for our device/radios because that's what comes on our phones. Jelly bean, which all AOSP ROMs are based from, doesn't have any code made directly for ours. All the developers have ported it over to our devices and it will be imperfect until Verizon jelly bean comes out/gets leaked.
Click to expand...
Click to collapse
Yeah thats what i figured. Just sucks i cannot use aosp in the meantime. Shocked more people are not having the same issue.
Got rid of opendns on my router and still a no go. Any other ideas guys? I feel left out not being able to use aosp. Gonna suck if i have to wait until the jb ota comes.
found a fix for anyone having issues with the wifi saying out of range or wps failed. go into your router settings and change your ssid name and password, restart your router and connect on your phone. worked great for me. don't now why this would happen on aosp roms but im glad i got it solved.
this can be closed now.
Never had this problem.
Android 4 Life
fix-this! said:
found a fix for anyone having issues with the wifi saying out of range or wps failed. go into your router settings and change your ssid name and password, restart your router and connect on your phone. worked great for me. don't now why this would happen on aosp roms but im glad i got it solved.
this can be closed now.
Click to expand...
Click to collapse
The best thing you can do is keep this in mind and help the next guys that posts about WiFi issues like yours. That would be huge if you did that.
fix-this! said:
found a fix for anyone having issues with the wifi saying out of range or wps failed. go into your router settings and change your ssid name and password, restart your router and connect on your phone. worked great for me. don't now why this would happen on aosp roms but im glad i got it solved.
this can be closed now.
Click to expand...
Click to collapse
I've seen a lot of people say that simply rebooting their router fixed wifi issues on their phone. Are you sure the reboot alone wasnt responsible for fixing the issue?
well the issue is back with a vengeance, nothing seems to work for me now.
Same here
fix-this! said:
well the issue is back with a vengeance, nothing seems to work for me now.
Click to expand...
Click to collapse
I've been a lurker for a while and created this account just to let you know I have the same issues but with a d2spr (sprint gs3). Only aosp roms and I've been through both slim bean and liquidsmooth rc9. It's definitely the phone, not the routers. With my phone, it only happens when I reboot for any reason. If I rebooted with wifi on, my toggles will still indicate that wifi is still on after the boot, but it will not receive any signal. Any networks that do show up in available networks state "out of range". Even if you were just connected to that network before the reboot and you are still in range it will state "out of range". Not until you toggle the wifi off, then back on, everything seems to correct itself until next boot. It has to be the wifi toggle in settings though and not the one on any widgets or any added to the notification tray. Weird. Any solutions on your end yet? Looks like it's been a few days without any updates.
I had this is issue and setting a static ip on my phone fixed it, it was a dhcp issue.
I just want to first thank everyone who worked on getting cyanogenmod to work on the jellybean boot loader. There is a problem that i am seeing though through the threads that wifi seems to not turn on. Unfortunately i have the same problem, i have had it for both the modified version on the 30th and still have it on the official version out the 31st. Has anyone else had this problem or even any vague idea as to the problem causing?
Wish I was posting with help I just wanted to cosign that I've also been going through the same thing from yesterday's unofficial to today's rom with turning the wifi on and having the tablet freeze. Hoping it can be worked out looking forward to using cm10 as soon as possible
I can confirm that i am still having the same wifi issues with the 11-01 official version.
I also had wifi issues initially, disable the wifi sleep policy and reboot, it would work afterwards.
sghi777 said:
I also had wifi issues initially, disable the wifi sleep policy and reboot, it would work afterwards.
Click to expand...
Click to collapse
for what it's worth I tried this but after the reboot I still ended up with the same problem, I think I'll just stick with cleanrom for now it's been running more than well enough
I updated to 11-2 and still no fix but I think I have come across something. I don't know if it just me but for some reason the wifi region in advanced is set to Europe. I try to switch it to US but never seems to save it. Am I the only one?
froggerhopper said:
I just want to first thank everyone who worked on getting cyanogenmod to work on the jellybean boot loader. There is a problem that i am seeing though through the threads that wifi seems to not turn on. Unfortunately i have the same problem, i have had it for both the modified version on the 30th and still have it on the official version out the 31st. Has anyone else had this problem or even any vague idea as to the problem causing?
Click to expand...
Click to collapse
I don't have the issue. I have done this twice for each rom stock, cleanrom, jb hydro and I have wifi and gps. I'm using Twrp.
wipe cache, Dalvik, Factory Reset, System ( you must flash a rom now ) so be absolutely sure you have one available.
flash cm10
reboot
boot recovery
flash gapps
reboot
This didn't fail in a total of six tries. GPS is slow and not many sats but it does work.
Once I was stuck on bootanimation. I forced power down by holding power till screen went black. Power up and booted properly.
I miss spoke on the above when I listed gps - checking my notes and reflashing, gps does not work on nightly for me; it does work on the other cm10 jb for me. Sorry! Wifi does work on both.
DANG!! As of 11/3 version, I still have wifi issues. I have flashed back when there was no CM10 and have done exactly above and still cant get no reception. I still think that the region in advanced settings have something to do with it.
froggerhopper said:
DANG!! As of 11/3 version, I still have wifi issues. I have flashed back when there was no CM10 and have done exactly above and still cant get no reception. I still think that the region in advanced settings have something to do with it.
Click to expand...
Click to collapse
I'm sorry to hear that. I had hoped the problem was the difference in the way we handled wiping and flashing. I don't understand why my unit works and yours doesn't. I don't remember anything else I did that may have made a difference but I'll download 11-3 and try again.
I'll report with that status in a bit.:good:
I was on cleanrom, flashed 11-3 as above and have wifi. I wish we knew how to isolate this problem, I'll do some searching and look at some of my logs and dmesg. There must be an answer why some units work and others don't.
When you try to turn wifi on does it turn on and stay turned on or does it refuse to turn on?
I checked my region settings and they were set Europe, I changed to US just for fun but no difference in use. I have read in the US they are restricted to channels 1 - 11 instead of 1 - 14, maybe that is one of the reasons for that option.
I was on cleanrom 2.5 before also. Had no problems with it but wanted to see if CM10 was any better. What happens is that after i flash CM10, when you first start a tablet from scratch, it will search for wifi and say in the middle of the screen "Turning wifi on" and will stay that way. So i eventually have to skip it to go on to the Home screen. When I go back later in settings to wifi, says the same thing and sometimes crashes. When I go back to clean rom or original stock, have no problems.
froggerhopper said:
I was on cleanrom 2.5 before also. Had no problems with it but wanted to see if CM10 was any better. What happens is that after i flash CM10, when you first start a tablet from scratch, it will search for wifi and say in the middle of the screen "Turning wifi on" and will stay that way. So i eventually have to skip it to go on to the Home screen. When I go back later in settings to wifi, says the same thing and sometimes crashes. When I go back to clean rom or original stock, have no problems.
Click to expand...
Click to collapse
I can't emulate that on my unit. Have you tried the cm10 by timmytim? If you need cm10 it may be an option. It is built on the cm10 you are trying to use but with some modifications.
I'm also waiting on the nightlies, in my case I'm waiting on gps.:good:
froggerhopper said:
I was on cleanrom 2.5 before also. Had no problems with it but wanted to see if CM10 was any better. What happens is that after i flash CM10, when you first start a tablet from scratch, it will search for wifi and say in the middle of the screen "Turning wifi on" and will stay that way. So i eventually have to skip it to go on to the Home screen. When I go back later in settings to wifi, says the same thing and sometimes crashes. When I go back to clean rom or original stock, have no problems.
Click to expand...
Click to collapse
One last shot, it will only take 5 minutes and is easy.
Power off
Remove external sdcard
Remove from dock
Power on
I now updated from twrp 2.2.2 to 2.3.1 and tried BOTH 11/5 AND timmytim versions and still no luck. Do you think i need to try clockworkmod? I don't think that would make a difference.
froggerhopper said:
I now updated from twrp 2.2.2 to 2.3.1 and tried BOTH 11/5 AND timmytim versions and still no luck. Do you think i need to try clockworkmod? I don't think that would make a difference.
Click to expand...
Click to collapse
No, I'm afraid not.
The last thing I can think of that could be different between our situations is your wifi.
I must begin by telling you my wifi router is an antique so I don't have some of the newer features.
This is a fishing trip. Take the little info I provide and try to use it to investigate your situation.
My router provides a table where I can list mac addresses of units I have programmed and only these are allowed access, even if they have the correct password, etc.
Some of the newer units have a button that automatically looks for units and self programs the router security features and any change made since the button was last pressed. If you have such then try to sync your unit again with cm10, otherwise look carefully through your router security options and see if anything stands out that may be different than with stock rom.
I know mac addresses and such are factory programmed but they can be spoofed and on units other than asus do sometimes change with rom.
For instance if I go to google play my TF300 shows as two different unit names.
Asus ASUS Transformer Pad TF300T
Asus Transformer Pad TF300T
That is enough difference to possibly cause your router to deny access.
None of this may apply but it is worth a try.
Good Luck!
wifi issues too
I am having same problem. tried 11-06 nightly and wifi will not even turn on. Tried other nightlies, same deal. Can't understand why not happening to all units. If anyone figures it out, let us know. I really want to try CM10! I think this is being discussed on the developers forum on the CM10 for JB thread as well.
bobrebn3 said:
I am having same problem. tried 11-06 nightly and wifi will not even turn on. Tried other nightlies, same deal. Can't understand why not happening to all units. If anyone figures it out, let us know. I really want to try CM10!
Click to expand...
Click to collapse
11/06 and 11/07 are both broken for me as well. I saw a post by untermensch ( I think ) in the nightly thread where he was pushing some of his work for use in cm10. Maybe in a day or two everyone will have wifi.
I have read you can flash his kernel after setting up cm10 and get wifi. I have not tried that and if a fix comes soon I probably won't.
What I have done is flash his TF300T kernel over CleanRom and it is faster and smoother. I am not over clocking, using balanced mode.
Sorry I don't have any other thoughts at this time.
Good Luck to us all!
uugghh
bobrebn3 said:
I am having same problem. tried 11-06 nightly and wifi will not even turn on. Tried other nightlies, same deal. Can't understand why not happening to all units. If anyone figures it out, let us know. I really want to try CM10! I think this is being discussed on the developers forum on the CM10 for JB thread as well.
Click to expand...
Click to collapse
I tried the last couple nightlies and still no wifi capability. Tried a rom based on CM10, still a no go. SO, using cleanROM for now, it seems to work very well for me. I wonder why CM10 works for some and not others? Is there a difference in the hardware from unit to unit?
Wifi works again on nightlies 11/09
I still don't have gps.
LUCKY!!!! I read the post and now on 11/9 and still the same problem. I do want to ask a question though to all that do have the problem. Were you on cleanrom before trying CM10? Does this have anything to do with cleankernel?
froggerhopper said:
LUCKY!!!! I read the post and now on 11/9 and still the same problem. I do want to ask a question though to all that do have the problem. Were you on cleanrom before trying CM10? Does this have anything to do with cleankernel?
Click to expand...
Click to collapse
I know you asked for those that didn't work but.
Just for more info and being fair to cleanrom.
I was on cleanrom when I flashed 11/09 and now I'm back on cleanrom till I see a size change on nightlies.
Any aokp or aosp Rom I flash it breaks my WiFi. Flash or restoring to a sense based WiFi is fine. This is what I notice, on an aokp or aosp Rom when I hit connect on my WiFi, the WiFi signal instantly drops to poor with no signal from excellent, once it isn't trying to connect any longer the WiFi signal bumps right back to excellent. I don't get it. I've spent the last evening flashing every non sense based Rom I could to confirm this and it happens on every non based sense.. I didn't try miui cause I don't like miui.. device info.
One x, 1.85, rooted, loader unlocked via HTC dev, unlocked blahblahblah..
Tia..
Yes, everything wiped and cleaned between installs.. cache, dalvik, system and factory reset.. never dirty install.
posted from my Motorola startac...
I haven't had any wifi issues on AOKP. Did you factory reset going between Sense and AOSP? I'm not positive but I think that is needed. I'm on the Nov. 10th nightly. Hope that helps a little, don't forget to back everything up (nandroid) before wiping factory reset.
Thanks but this isn't the problem, I wish it was tho.. :*(
Sent from my One X using xda premium
sinco54 said:
Any aokp or aosp Rom I flash it breaks my WiFi. Flash or restoring to a sense based WiFi is fine. This is what I notice, on an aokp or aosp Rom when I hit connect on my WiFi, the WiFi signal instantly drops to poor with no signal from excellent, once it isn't trying to connect any longer the WiFi signal bumps right back to excellent. I don't get it. I've spent the last evening flashing every non sense based Rom I could to confirm this and it happens on every non based sense.. I didn't try miui cause I don't like miui.. device info.
One x, 1.85, rooted, loader unlocked via HTC dev, unlocked blahblahblah..
Tia..
Yes, everything wiped and cleaned between installs.. cache, dalvik, system and factory reset.. never dirty install.
posted from my Motorola startac...
Click to expand...
Click to collapse
I couldn't tell you. I always have 1 bar unless I'm next to the router or downstairs in my living room.. and the connection cancels or drops.. oh the joys of a router without an external antenna..
I am having the same problem. I use the King Kang rom and sometimes i will have to press connect many times before my phone will connect to wifi. Sometimes it wont connect at all. In the wifi settings it usually says i have full bars, but when i connect it goes down to 1 or 2 most of the time. I am in the room with the router, so i know i should be getting full bars all of the time. It's really frustrating.
bvrr0 said:
I am having the same problem. I use the King Kang rom and sometimes i will have to press connect many times before my phone will connect to wifi. Sometimes it wont connect at all. In the wifi settings it usually says i have full bars, but when i connect it goes down to 1 or 2 most of the time. I am in the room with the router, so i know i should be getting full bars all of the time. It's really frustrating.
Click to expand...
Click to collapse
This is all too familiar with me..
Sent from my One X using xda premium
sinco54 said:
This is all too familiar with me..
Sent from my One X using xda premium
Click to expand...
Click to collapse
Yes there are a few more of us that are having this same issue. We have started a thread but it has been pushed back to page three of the forum. Please post here your issues and we can try to bring some light to this issue and get it worked out.
Here is the thread I have started. http://forum.xda-developers.com/showthread.php?t=1989203&page=4 Also check the issue list for CM10 and star the issue about wifi towards the bottom. I am user: backslashcs on google and I have posted a comment on the issue there as well.
My wifi connection never seems to hold on any AOSP based rom I try, and I've tried many. I never had any issue with any Sense 4 based roms. Does anyone know why? Is there a workaround? I've tinkered with all the advanced settings within the wifi area. When I tell it to connect to my wifi, it doesnt even seem to make an attempt until 2-3 minutes later. There's always this dead period for 2-3 minutes every time I turn the screen back on. I set it to NOT put the wifi to sleep with the phone.
My Phone is rooted/unlocked/supercid/s-off. AT&T HTC One X (USA). It was flashed with the final firmware RUU before wiping and going back to AOSP roms, and that still didn't help. I'm almost positive I have the newest firmware, radio, hboot, etc. What else can I try?
Is it a two wire router? I've heard they have trouble with aosp ROMs.
Sent from my Evita
timmaaa said:
Is it a two wire router? I've heard they have trouble with aosp ROMs.
Sent from my Evita
Click to expand...
Click to collapse
Actually yes, my home router is, but I seem to have the same trouble with my netzero hotspot and my friend's router, which is definitely not the same type of router. Still, is there anything I should try for now?
To be completely honest, I'm not sure. It's definitely not happening at all on Sense/stock ROMs?
Sent from my Evita
I'm following these threads and will try the methods listed within. Here's hoping.
http://forum.xda-developers.com/showthread.php?t=2177495
http://forum.xda-developers.com/showthread.php?t=2181124
After restarting the phone, it seems none of that has helped at all.