I just want to first thank everyone who worked on getting cyanogenmod to work on the jellybean boot loader. There is a problem that i am seeing though through the threads that wifi seems to not turn on. Unfortunately i have the same problem, i have had it for both the modified version on the 30th and still have it on the official version out the 31st. Has anyone else had this problem or even any vague idea as to the problem causing?
Wish I was posting with help I just wanted to cosign that I've also been going through the same thing from yesterday's unofficial to today's rom with turning the wifi on and having the tablet freeze. Hoping it can be worked out looking forward to using cm10 as soon as possible
I can confirm that i am still having the same wifi issues with the 11-01 official version.
I also had wifi issues initially, disable the wifi sleep policy and reboot, it would work afterwards.
sghi777 said:
I also had wifi issues initially, disable the wifi sleep policy and reboot, it would work afterwards.
Click to expand...
Click to collapse
for what it's worth I tried this but after the reboot I still ended up with the same problem, I think I'll just stick with cleanrom for now it's been running more than well enough
I updated to 11-2 and still no fix but I think I have come across something. I don't know if it just me but for some reason the wifi region in advanced is set to Europe. I try to switch it to US but never seems to save it. Am I the only one?
froggerhopper said:
I just want to first thank everyone who worked on getting cyanogenmod to work on the jellybean boot loader. There is a problem that i am seeing though through the threads that wifi seems to not turn on. Unfortunately i have the same problem, i have had it for both the modified version on the 30th and still have it on the official version out the 31st. Has anyone else had this problem or even any vague idea as to the problem causing?
Click to expand...
Click to collapse
I don't have the issue. I have done this twice for each rom stock, cleanrom, jb hydro and I have wifi and gps. I'm using Twrp.
wipe cache, Dalvik, Factory Reset, System ( you must flash a rom now ) so be absolutely sure you have one available.
flash cm10
reboot
boot recovery
flash gapps
reboot
This didn't fail in a total of six tries. GPS is slow and not many sats but it does work.
Once I was stuck on bootanimation. I forced power down by holding power till screen went black. Power up and booted properly.
I miss spoke on the above when I listed gps - checking my notes and reflashing, gps does not work on nightly for me; it does work on the other cm10 jb for me. Sorry! Wifi does work on both.
DANG!! As of 11/3 version, I still have wifi issues. I have flashed back when there was no CM10 and have done exactly above and still cant get no reception. I still think that the region in advanced settings have something to do with it.
froggerhopper said:
DANG!! As of 11/3 version, I still have wifi issues. I have flashed back when there was no CM10 and have done exactly above and still cant get no reception. I still think that the region in advanced settings have something to do with it.
Click to expand...
Click to collapse
I'm sorry to hear that. I had hoped the problem was the difference in the way we handled wiping and flashing. I don't understand why my unit works and yours doesn't. I don't remember anything else I did that may have made a difference but I'll download 11-3 and try again.
I'll report with that status in a bit.:good:
I was on cleanrom, flashed 11-3 as above and have wifi. I wish we knew how to isolate this problem, I'll do some searching and look at some of my logs and dmesg. There must be an answer why some units work and others don't.
When you try to turn wifi on does it turn on and stay turned on or does it refuse to turn on?
I checked my region settings and they were set Europe, I changed to US just for fun but no difference in use. I have read in the US they are restricted to channels 1 - 11 instead of 1 - 14, maybe that is one of the reasons for that option.
I was on cleanrom 2.5 before also. Had no problems with it but wanted to see if CM10 was any better. What happens is that after i flash CM10, when you first start a tablet from scratch, it will search for wifi and say in the middle of the screen "Turning wifi on" and will stay that way. So i eventually have to skip it to go on to the Home screen. When I go back later in settings to wifi, says the same thing and sometimes crashes. When I go back to clean rom or original stock, have no problems.
froggerhopper said:
I was on cleanrom 2.5 before also. Had no problems with it but wanted to see if CM10 was any better. What happens is that after i flash CM10, when you first start a tablet from scratch, it will search for wifi and say in the middle of the screen "Turning wifi on" and will stay that way. So i eventually have to skip it to go on to the Home screen. When I go back later in settings to wifi, says the same thing and sometimes crashes. When I go back to clean rom or original stock, have no problems.
Click to expand...
Click to collapse
I can't emulate that on my unit. Have you tried the cm10 by timmytim? If you need cm10 it may be an option. It is built on the cm10 you are trying to use but with some modifications.
I'm also waiting on the nightlies, in my case I'm waiting on gps.:good:
froggerhopper said:
I was on cleanrom 2.5 before also. Had no problems with it but wanted to see if CM10 was any better. What happens is that after i flash CM10, when you first start a tablet from scratch, it will search for wifi and say in the middle of the screen "Turning wifi on" and will stay that way. So i eventually have to skip it to go on to the Home screen. When I go back later in settings to wifi, says the same thing and sometimes crashes. When I go back to clean rom or original stock, have no problems.
Click to expand...
Click to collapse
One last shot, it will only take 5 minutes and is easy.
Power off
Remove external sdcard
Remove from dock
Power on
I now updated from twrp 2.2.2 to 2.3.1 and tried BOTH 11/5 AND timmytim versions and still no luck. Do you think i need to try clockworkmod? I don't think that would make a difference.
froggerhopper said:
I now updated from twrp 2.2.2 to 2.3.1 and tried BOTH 11/5 AND timmytim versions and still no luck. Do you think i need to try clockworkmod? I don't think that would make a difference.
Click to expand...
Click to collapse
No, I'm afraid not.
The last thing I can think of that could be different between our situations is your wifi.
I must begin by telling you my wifi router is an antique so I don't have some of the newer features.
This is a fishing trip. Take the little info I provide and try to use it to investigate your situation.
My router provides a table where I can list mac addresses of units I have programmed and only these are allowed access, even if they have the correct password, etc.
Some of the newer units have a button that automatically looks for units and self programs the router security features and any change made since the button was last pressed. If you have such then try to sync your unit again with cm10, otherwise look carefully through your router security options and see if anything stands out that may be different than with stock rom.
I know mac addresses and such are factory programmed but they can be spoofed and on units other than asus do sometimes change with rom.
For instance if I go to google play my TF300 shows as two different unit names.
Asus ASUS Transformer Pad TF300T
Asus Transformer Pad TF300T
That is enough difference to possibly cause your router to deny access.
None of this may apply but it is worth a try.
Good Luck!
wifi issues too
I am having same problem. tried 11-06 nightly and wifi will not even turn on. Tried other nightlies, same deal. Can't understand why not happening to all units. If anyone figures it out, let us know. I really want to try CM10! I think this is being discussed on the developers forum on the CM10 for JB thread as well.
bobrebn3 said:
I am having same problem. tried 11-06 nightly and wifi will not even turn on. Tried other nightlies, same deal. Can't understand why not happening to all units. If anyone figures it out, let us know. I really want to try CM10!
Click to expand...
Click to collapse
11/06 and 11/07 are both broken for me as well. I saw a post by untermensch ( I think ) in the nightly thread where he was pushing some of his work for use in cm10. Maybe in a day or two everyone will have wifi.
I have read you can flash his kernel after setting up cm10 and get wifi. I have not tried that and if a fix comes soon I probably won't.
What I have done is flash his TF300T kernel over CleanRom and it is faster and smoother. I am not over clocking, using balanced mode.
Sorry I don't have any other thoughts at this time.
Good Luck to us all!
uugghh
bobrebn3 said:
I am having same problem. tried 11-06 nightly and wifi will not even turn on. Tried other nightlies, same deal. Can't understand why not happening to all units. If anyone figures it out, let us know. I really want to try CM10! I think this is being discussed on the developers forum on the CM10 for JB thread as well.
Click to expand...
Click to collapse
I tried the last couple nightlies and still no wifi capability. Tried a rom based on CM10, still a no go. SO, using cleanROM for now, it seems to work very well for me. I wonder why CM10 works for some and not others? Is there a difference in the hardware from unit to unit?
Wifi works again on nightlies 11/09
I still don't have gps.
LUCKY!!!! I read the post and now on 11/9 and still the same problem. I do want to ask a question though to all that do have the problem. Were you on cleanrom before trying CM10? Does this have anything to do with cleankernel?
froggerhopper said:
LUCKY!!!! I read the post and now on 11/9 and still the same problem. I do want to ask a question though to all that do have the problem. Were you on cleanrom before trying CM10? Does this have anything to do with cleankernel?
Click to expand...
Click to collapse
I know you asked for those that didn't work but.
Just for more info and being fair to cleanrom.
I was on cleanrom when I flashed 11/09 and now I'm back on cleanrom till I see a size change on nightlies.
Related
As title says, I went to the theatre today and realized I still had 5 bars of WiFi when I was 20KM away from home, was this a one time glitch or is it a known problem?
sounds familiar....
hey there,
I'm down here in New Zealand with a both versions of device, X & XL
my XL has the problem you speak about.
When i leave my house, it takes for ever to disconnect, pain of course because the 3G or 4G wont flip on while it thinks it is still on wifi.
When i return to my home/SSID the device takes for ever to reconnect, if it even does. i go to the wifi settings, and the connection initiation is just cycling, end attempts to connect, over and over.
I've thought i had fix it once before, by installing a new RUU. I was on RUU 1.77.708.3 Asia, could only find 1.77.708.2.
this seemed to fix disconnection on departure problem, but the cycling and hunting continued when i returned.
I have since found that this must be linked to the bluetooth. I say this because while the wifi is hunting/cycling i flip off the bluetooth and the wifi reconnects within seconds. I tested this more and with bluetooth disabled i have no wifi problems at all, but with bluetooth on, its gives my problems.
The second issue is the bluetooth its self. unlike my flawless desireHD, i can only stream music to my car head-deck, when i get a phone call, the music cuts out like it should, but the phone audio doesn't happen, been like that from the get go. wifi was a problem all the time because this dodgy bluetooth was on all the time so i could listen to music in the car and hopefully one day take calls in the car also.
well i have good news for me, today i flashed CleanROM.3.Standard .
http://forum.xda-developers.com/showthread.php?t=1655011
Today for the first time I can take calls over bluetooth in the car. this is good news because i was certain this was a hardware issue, even it it is, i am confident it can be resolved in the software now.
I'll do a few drive-by's my house tonight to test this wifi, see if that got resolved also. I'll let you know the result later.
I tell you all this in-case our issues are the same, it might save you some time... maybe.
good luck with, and check that bluetooth theory because i'm dying to know if its a common problem.
Cheers
Thank you for that very detailed post.
I also have bluetooth running (connected) to my car and it works flawlessly but it may be a cause for the WiFI staying connected as well. I will turn it off and see how it goes as the week progresses and keep this updated as well.
I would also like to flash clean rom but I am using the Rogers variant so I am worried it might not be compatible.
an_xda said:
As title says, I went to the theatre today and realized I still had 5 bars of WiFi when I was 20KM away from home, was this a one time glitch or is it a known problem?
Click to expand...
Click to collapse
This has been a known problem since the HOX has been released.
an_xda said:
As title says, I went to the theatre today and realized I still had 5 bars of WiFi when I was 20KM away from home, was this a one time glitch or is it a known problem?
Click to expand...
Click to collapse
First reaction: It's not a glitch, that's just really good WiFi...
Sent from my HTC One X using xda premium
I did those drive-by's......
Me again...
I did those drive-by's of my house, unfortunately there is no joy for me, still the WiFi behaves the same as before.
Its funny, down here we have assumed that the X is the same as the XL apart from the cpu. But in reality they are two completely different machines.
So I turned off Bluetooth and the problem does not occur anymore, WiFi disconnects as needed but it is obviously not a permanent fix. Another problem is the WiFi being on and off with 5 bars swapping between 4G and WiFi...
CleanROM again......
OK, I was doing some more reading and have since found that the developer of CleanROM has released a GSM patch so the hotspot on his ROMs now work.
You might remember i said earlier in this thread that CleanROM.3 worked best for me but the hotspot didn't work so i couldn't use it.
Now i have CleanROM installed again, Hotspot works, bluetooth both Audio & Phone work, and the WiFi at this stage seems to be doing what it should without having to manually toggle the bluetooth on and off. No apparent bugs to report at this stage.
Software Info on phone says this version is built around 1.29.728.12. I don't know if that means all ICS version of that number are good or not, but again its a place to start. Its looking like some versions have the issue and some don't, this re-assures me that it can be resolved within the software. I don't mind testing this stuff, as long as the developers don't mind developing it, and its a good learning curve.... its all good.
Check this CleanROM work out, it could be your answer.
http://forum.xda-developers.com/showthread.php?t=1655011
I'll check back in in a day or so and update you on my WiFi situation.
Cheers!
Thanks again for all your research and assistance.
I have the Rogers variant, should be no problem flashing it to CleanROM correct? Also, for each new CleanROM update, I would have to wipe and flash again? Seems troublesome.
Can you advise on the process required to flash the ROM? I am new to Android and the steps in the thread is not as comprehensive.
Many thanks.
hi there, show you how to load roms, thats a big job for me....
...I'm new to this myself, but i know a tutorial that will save me a ton of typing.
you need to do 2 things first, before flashing roms.
1,Unlock your bootloader
2,Install clockworkmod
have a look at this ,
http://forum.xda-developers.com/showthread.php?t=1647272
Study this thread, very helpfull. He explains how to install clockworkmod on your device, once you have that done you are 80% there, and you only have to do this process once, once done, flashing roms will always be the last 20%, you never do this again.
Infact flashing roms and backing up your own rom is a very simply task. the commands are on a list, just choose them as you go. To backup, wipe, and flash a new rom takes me less than 10 minutes.
Go to you tube and look at this, this shows you how Clockworkmod works.
http://www.youtube.com/watch?v=XOQEmQYFEeY
dont be freaked out, take it step by step, you'll be fine.
I also started this thread, regarding working roms for this wifi issue
http://forum.xda-developers.com/showthread.php?p=27585586#post27585586
no one has replyed yet, but it might yeild helpfull info later on perhaps
Thanks, I will do this shortly. Will unlocking the bootloader or doing any of the aforementioned steps give me the tampered signature?
Yes
yes, your phone will be marked.
Boot loader will be marked "Unlocked" , even if you relock it, its just gonna say "relocked" . nothing you can do about that.
The boot loader will also say "tampered" if you update the rom, but that msg dissappears completely if you update the phone via an RUU.exe
Can this hurt me with regards to warranty requests? I know I can remove the tampered status by flashing a stock ROM but I am concerned re: bootloader.
First of all I would like to say I appreciate all the work that the XDA forums has been doing, and I am pleased to see that the community is as strong, if not, stronger since the last time that I have been here a couple years ago. The questions, answers, feedback and help, let alone for the Samsung Galaxy S 4G released by T-Mobile in February of 2011, is amazing. These forums have really helped people make the most out of their device, and had it not exist, this Galaxy S in my hand would have been long forgotten by Samsung, and the Gingerbread stock ROM that I was given with would be my home. It reminded me of how much I had missed messing with these android devices; nothing like jailbreaking and installing cydia on my iPhone. The experience is not the same. Anyways...
Pulling out my T959V from its box I decided it was time to finally install ICS on it after Samsung have let these great device fade away.
I installed ICS last night and stayed up searching for kernels and testing out different ROMS some slow and many faster than others and decided that Cyanogen 9 was the best looking and performance-wise ROM on the phone in my opinion. Considering that all other ROMS base it on the nightly builds extra stuff was just junk, considering this phone only has one processor. So I upgraded from Gingerbread 2.3.6 and I've tried many different kernels and everything works except WiFi. It can not even search for one network no matter how many times I press "Scan". I'd appreciate all the help I can get.
Thanks
Try rebooting into recovery and running fix permissions. Usually fixes wifi right up.
getochkn said:
Try rebooting into recovery and running fix permissions. Usually fixes wifi right up.
Click to expand...
Click to collapse
gave that a go no good :/ I wonder what the problem is?
mkho30 said:
gave that a go no good :/ I wonder what the problem is?
Click to expand...
Click to collapse
Was wifi working after you went to GB? Just trying to eliminate a hardware issue. I've flashed CM9 a bunch and have never had wifi issues on it.
hechoen said:
Was wifi working after you went to GB? Just trying to eliminate a hardware issue. I've flashed CM9 a bunch and have never had wifi issues on it.
Click to expand...
Click to collapse
yeah I actually used wifi on that same day before I upgraded to ICS. I was using stock GB 2.3.6 then rooted and all that stuff...
mkho30 said:
yeah I actually used wifi on that same day before I upgraded to ICS. I was using stock GB 2.3.6 then rooted and all that stuff...
Click to expand...
Click to collapse
I'd check the MD5 of the CM9 DL and make sure it's a match. I haven't heard of anyone else having that issue. Also make sure you DL the latest CM9. If the MD5 matches format system, wipe cache/dalvik and flash again. Reboot an let it sit for five minutes then try wifi.
hechoen said:
I'd check the MD5 of the CM9 DL and make sure it's a match. I haven't heard of anyone else having that issue. Also make sure you DL the latest CM9. If the MD5 matches format system, wipe cache/dalvik and flash again. Reboot an let it sit for five minutes then try wifi.
Click to expand...
Click to collapse
Yeah I've checked the MD5 sums of the zip packages after download. This is so bizarre, and the CM9 is not the only ROM I've tried. I've tried about 4 or 5 of them and different kernels as well and all of them do not connect to WiFi. I have formatted system, and always wiped any trace of the prior ROM before installing. Plus, I have tried the method where I would boot to recovery and "fix permissions". No good.
I would use a heimdall one click go back to stock kj6 then flash up to cm9. Sounds like you have some bugs that will only get squashed by going back to stock. IMO I would flash bootloaders too. Just so it overwrites EVERYTHING.
eollie said:
I would use a heimdall one click go back to stock kj6 then flash up to cm9. Sounds like you have some bugs that will only get squashed by going back to stock. IMO I would flash bootloaders too. Just so it overwrites EVERYTHING.
Click to expand...
Click to collapse
I just used the Stock KJ6 + Root with the Blastoff v2 kernel integrated, flashed, flashed again and installed boot-loaders as well. Phone restarted, went to WiFi, checked it, and it says "Error". Now I'm going to flash it to true stock using Odin rather than the .jar executable no luck so far and I don't know whats going on.
mkho30 said:
I just used the Stock KJ6 + Root with the Blastoff v2 kernel integrated, flashed, flashed again and installed boot-loaders as well. Phone restarted, went to WiFi, checked it, and it says "Error". Now I'm going to flash it to true stock using Odin rather than the .jar executable no luck so far and I don't know whats going on.
Click to expand...
Click to collapse
Sounding more and more like a hardware issue. Wifi and bluetooth are on the same chip so if your still on stock try and turn on BT. If it turns on it might not be the chip. If it gives the same error I'd bet money on a bad chip.
This would be a good time for logcat and dmesg...
Posted from my SGS4G, thanks to Team Acid development
hechoen said:
Sounding more and more like a hardware issue. Wifi and bluetooth are on the same chip so if your still on stock try and turn on BT. If it turns on it might not be the chip. If it gives the same error I'd bet money on a bad chip.
Click to expand...
Click to collapse
Bluetooth works fine, WiFi just wont turn on. Its not a hardware issue, and WiFi was working the same day before I flashed to ICS
Done use stock + blastoff that is a stepping stone one click for people to go back to stock then either flash another gb rom or ics rom. Wifi is broken because of the new wifi module used. I never meant for it to be used as a daily driver. Use the heimdall one click bhundven has posted in his one click thread.
@mkho30
I had the same exact Wi-Fi issue a few months ago. I tried everything you tried and what members are suggesting in this thread.
I also asked about this issue on irc (Team Acid) and was told by Bryan that ICS (if I remember correctly) doesn't support WPS button connection. I assumed it was "on my end" and not ROM related.
Bryan suggested that I reboot my router. I had done that several times before asking. I didn't even know you could log in to your router to reconfigure it so he suggested that I Google to learn.
Long story short. I googled and read allot. I reconfigured my router many different ways. I disabled my WPS button connection and reset my router many times. I changed the security every way possible. I even set up a guest network.. the ONLY way I was able to connect to my Wi-Fi network was if I disabled the security COMPLETELY.
That wasn't an option for me. I live in an apartment building and I have seen people in the halls with laptops using their neighbors Wi-Fi.
I tried everything for a couple of months and finally went back to Gingerbread last weekend.
Sorry I can't be of any help with this reply. I just wanted to share my experience and let you know that you aren't the only one that has this issue...man I miss ICS. I didn't have an issue with the battery after "I settled in" Hopefully we can find out what is going on with us.
Btw. I'm back on Gingerbread and I connect to Wi-Fi with no problems.
WPA2 encryption should work fine. It works fine with my router configuration
FBis251 said:
WPA2 encryption should work fine. It works fine with my router configuration
Click to expand...
Click to collapse
I tried that several times FB. During my searching I came across a thread (one of those answers sites) that gave your answer as a fix.
I REALLY did my do diligence in trying to get connected. I hadn't seen anyone else with this problem until today so I spent hours trying WPA2 and other configurations. I thought WPA2 would fix it for sure because that was what I had read so I kept trying it. It never worked for me. The only thing that did was having no encryption at all..I started to think that it was a "Black Ice Voodoo thing" lol. Remember how some users, no matter what they did, could never flash Black Ice Voodoo?
Btw the error I always got was an Authentication error.
Thanks for replying
If you're up for it and your router is supported, try OpenWRT. It really sounds like a router issue.
Posted from my SGS4G, thanks to Team Acid development
Sorry. I don't use a pc at work. I have to sneak on xda using my phone and they don't like seeing is on our phones for to long.
I forgot to mention in my reply to the OP that I DIDN'T have a problem scanning for Wi-Fi access. I could do that. I just couldn't connect without getting an Authentication Error. My phone would scan, connect, then discontent and give me the error.
I've had the exact same authentication error, scans,asks for password, tries to connect, then errors out, usually always after flashing CM9 and either a reinstall (recopying to my SDcard too) or a fix permissions have fixed it.
ALSO, this is very important. FORGET the connections in your wifi list after doing the fix permissions. IT WILL NOT connect to a saved connection. Reboot to recovery, fix permissions (don't use a tool within android), goto wifi, click on the connection and choose forget, then choose the connection again and try that.
jeffsf said:
If you're up for it and your router is supported, try OpenWRT. It really sounds like a router issue.
Posted from my SGS4G, thanks to Team Acid development
Click to expand...
Click to collapse
Thanks Jeff. I'll try it when I get home. I have a Motorola Surfboard that is less than a year old (It's a modem/router combo) so the unit is "up to date"
---------- Post added at 05:35 PM ---------- Previous post was at 05:16 PM ----------
getochkn said:
I've had the exact same authentication error, scans,asks for password, tries to connect, then errors out, usually always after flashing CM9 and either a reinstall (recopying to my SDcard too) or a fix permissions have fixed it.
ALSO, this is very important. FORGET the connections in your wifi list after doing the fix permissions. IT WILL NOT connect to a saved connection. Reboot to recovery, fix permissions (don't use a tool within android), goto wifi, click on the connection and choose forget, then choose the connection again and try that.
Click to expand...
Click to collapse
I will try this. I have done much of what you have stated here maybe even all of it before. But not in the order you describe.. I'd really like to go back to ICS. I had 4G on it (home) where I used to get 3G on Gingerbread. Also at home I needed Wi-Fi calling on Gingerbread but on ICS I had great reception.
@jeff. I just googled OpenWRT and I should have before I said I'll try it when I get home lol. OpenWRT might be to much for me right now.
Thank you for all your help people. I'll update you as soon as I can. I must go sailing now. It's Red Flag!
I just purchased a used HTC One X from the Rogers network and unlocked it. Before rooting it, on the Sense rom WiFi was working great. Very strong signal and it never dropped. Upon flashing CM10, it's not picking up my home network (which I know is working because I'm typing on it right now and the device was connecting to it earlier).
I downloaded WiFi analyzer and it's jumping between networks, some networks pop up and then disappear and then new ones pop up. WiFi is just acting very strange. I did all the appropriate wipes before flashing.
I found a lot of WiFi issues surrounding the international One X but I don't think this is a defect since it was working fine with Sense.
Does anyone else have any experience with this?
Thanks!
Just flashed back to a Sense rom, and low and behold my WiFi is working properly again.
I've had the same experience with CM10 (different nightlies) and AOKP, WiFi is just not reliable. I can connect just fine and the signal strength is the same as with Sense (including CleanROM) but at random times transfer speeds will go down or just drop completely, usually turning WiFi off and on fixes it but it happens again within a couple of hours.
I've tried a couple of tips from those threads like turning off the 5GHhz radio on my router but that doesn't seem to help
fabiancalvo said:
I've had the same experience with CM10 (different nightlies) and AOKP, WiFi is just not reliable. I can connect just fine and the signal strength is the same as with Sense (including CleanROM) but at random times transfer speeds will go down or just drop completely, usually turning WiFi off and on fixes it but it happens again within a couple of hours.
I've tried a couple of tips from those threads like turning off the 5GHhz radio on my router but that doesn't seem to help
Click to expand...
Click to collapse
I can't even detect my home network. There's a few of the neighbors networks that pop up on and off but it's not consistent.
I'm literally sitting on my workstation which is connected to my home network and I have full bars. On Sense, I also get full bars and WiFi works as expected.
TotalCrisis said:
I can't even detect my home network. There's a few of the neighbors networks that pop up on and off but it's not consistent.
I'm literally sitting on my workstation which is connected to my home network and I have full bars. On Sense, I also get full bars and WiFi works as expected.
Click to expand...
Click to collapse
I've had troubles as well with WIFI on my device running CM10. I've posted numerous time to the CM10 dev forum but nothing comes from it at all. I had very good wifi with the Oct nightlies but now my Wifi is chocked off and doesn't perform as expected. I've tried rebooting my modem, router, switch everything and still the same results. Is there anyway to bring some attention to this or figure out the problem?
Help others and myself figure this problem out, anyone?
beankid said:
I've had troubles as well with WIFI on my device running CM10. I've posted numerous time to the CM10 dev forum but nothing comes from it at all. I had very good wifi with the Oct nightlies but now my Wifi is chocked off and doesn't perform as expected. I've tried rebooting my modem, router, switch everything and still the same results. Is there anyway to bring some attention to this or figure out the problem?
Help others and myself figure this problem out, anyone?
Click to expand...
Click to collapse
Are you on the stock kernel for CM10? Try flashing another kernel. It could be a kernel issue that you're having. I had this problem When I flashed PACman, and all i did was just flash Rohan's Build 5 and now my WiFi is working just fine.
Myrder said:
Are you on the stock kernel for CM10? Try flashing another kernel. It could be a kernel issue that you're having. I had this problem When I flashed PACman, and all i did was just flash Rohan's Build 5 and now my WiFi is working just fine.
Click to expand...
Click to collapse
I'll download rohans kernel as I've been using the built-in Kernal with that comes with CM10.
**Edit: I've installed RoHan's kernel but still the results are the same. The wifi and network become grayed out from time to time and websites fail to load. I know my home connection isn't quite that fast but there is no reason that the connection all together would drop.
my wifi icon on cm10 just turns grey after a while and doesn't receive any data. So i have to toggle it off and then on again to get it to work again
Sent from my One X using Tapatalk 2
The CM10 stable rom is out for the LTE One X. I'm going to give it a go and see if any thing changes.
Check your region code under Wifi -> Menu -> Advanced Settings -> Region Code
Make sure it's under US (or wherever you are), reboot and see if that helps.
stnguyen09 said:
Check your region code under Wifi -> Menu -> Advanced Settings -> Region Code
Make sure it's under US (or wherever you are), reboot and see if that helps.
Click to expand...
Click to collapse
I'm located in Canada, and I've tried setting it to US and Canada. No dice.
I tried the a different kernel, CM10 nightly, CM10 stable, AOKP, and none of them are working.
I'm having a similar problem. My wifi won't turn on for some reason. It's related to the phone hardware, not my network. And I'm only seeing this problem when flashing the most recent nightly of CM10.
I'm not sure what else to try. Any ideas?
I've tried rohan's kernel as well as setting the region for the WiFi adapter but eventually it happens again. It's not as bad as some of the other posts I've seen, but it does kill data through WiFi at some point and transfer speeds drop.
Is there anyway to get further data on this? I know that my phone doesn't have the hardware "bug" first reported with a few of the devices. Any logs or error reports we can try and gather?
I managed to connect to my home wifi which I was previously unable to connect to, I had to change my router's wireless signal channel from 13 to 1. I am able to hold a signal fine, however I know many of my neighbors networks are not showing up like they should. Similarly, I am also unable to pick up my university network at school.
As I've said, Wifi works fine on Sense.
Is there any way I can help with error reporting in any way? I don't mind donating a bit of money to the CM team and help them get some logs.
It's nice to know I'm not the only one affected.
I would have to say this is completely a Kernel problem. I am having a similar issue in cm10 on N7000. But it's only happens to the some of the routers.
My house's router is a d-link product. And when you are connected you will having no issue, but once you restarted your phone you are getting trouble to reboot the router once to get your self connected again, in the phone, the wifi will stating "Connecting" like forever.
But I am not getting the same trouble when I am with my company's wifi and the Wifi of my friends lynsys. So its hard to tell the developer about this issue because it's not happens to all people. I hopes this info helps. Reboot the router usually works for me.
Sent from my GT-N7000 using Tapatalk 2
yiwsg said:
I would have to say this is completely a Kernel problem. I am having a similar issue in cm10 on N7000. But it's only happens to the some of the routers.
My house's router is a d-link product. And when you are connected you will having no issue, but once you restarted your phone you are getting trouble to reboot the router once to get your self connected again, in the phone, the wifi will stating "Connecting" like forever.
But I am not getting the same trouble when I am with my company's wifi and the Wifi of my friends lynsys. So its hard to tell the developer about this issue because it's not happens to all people. I hopes this info helps. Reboot the router usually works for me.
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Unfortunately it's not always possible to reboot the router.
Like I said, I can confirm this issue and anything I can do to help I will try to provide.
These issues with CM10 and the new AOSP will almost make me *shutter's to think this thought* move back to sense.....I'm just not sure what to do. Should we link this to the dev thread?
Edit: I've captured a logcat from me turning on wifi, connecting to a website, and loading a second website to see the behavior. PM me if this would be of use.
This is the only reason I'm using a Sense-based ROM (CleanROM), nightly builds for CM10 run great and I have no other issues, but this one is kind of a deal-breaker for me.
beankid said:
These issues with CM10 and the new AOSP will almost make me *shutter's to think this thought* move back to sense.....I'm just not sure what to do. Should we link this to the dev thread?
Edit: I've captured a logcat from me turning on wifi, connecting to a website, and loading a second website to see the behavior. PM me if this would be of use.
Click to expand...
Click to collapse
Would it be possible for us to get in contact with a developer?
How would I go about getting a logcat of my own?
fabiancalvo said:
This is the only reason I'm using a Sense-based ROM (CleanROM), nightly builds for CM10 run great and I have no other issues, but this one is kind of a deal-breaker for me.
Click to expand...
Click to collapse
I feel you man. I'm sticking with AOSP because I managed to at least get my home network working but it's definitely annoying not being able to get onto my university network.
I try to keep up with latest os, but 4.3 has me baffled. The first time I tried to install 4.3 was on Jellybam 10.2. I followed the instructions to the tee, but it didn't work. All 4.3 roms I've loaded I've never had a signal. I don't know what I'm doing wrong. Now that all of the 4.3 roms have the custom recovery already on the rom, it still doesn't work. I have no signal. I thought about unrooting my sg3 and starting over, but that is a pain. So I'm basically stuck with 4.2.2. If anyone has anything to say about my problem please do so. Thanks
wily5150 said:
I try to keep up with latest os, but 4.3 has me baffled. The first time I tried to install 4.3 was on Jellybam 10.2. I followed the instructions to the tee, but it didn't work. All 4.3 roms I've loaded I've never had a signal. I don't know what I'm doing wrong. Now that all of the 4.3 roms have the custom recovery already on the rom, it still doesn't work. I have no signal. I thought about unrooting my sg3 and starting over, but that is a pain. So I'm basically stuck with 4.2.2. If anyone has anything to say about my problem please do so. Thanks
Click to expand...
Click to collapse
I'll second that. Was running cleanrom 7.0, thought I'd fool around with 4.3 Flashed a couple of different ROMS, and none worked. Restored my backup of Cleanrom, and still no signal. It shows 4 bars, can receive an occasional text, but trying to text or make a call the signal drops away. Help!
Tim
wily5150 said:
I try to keep up with latest os, but 4.3 has me baffled. The first time I tried to install 4.3 was on Jellybam 10.2. I followed the instructions to the tee, but it didn't work. All 4.3 roms I've loaded I've never had a signal. I don't know what I'm doing wrong. Now that all of the 4.3 roms have the custom recovery already on the rom, it still doesn't work. I have no signal. I thought about unrooting my sg3 and starting over, but that is a pain. So I'm basically stuck with 4.2.2. If anyone has anything to say about my problem please do so. Thanks
Click to expand...
Click to collapse
moonfarm said:
I'll second that. Was running cleanrom 7.0, thought I'd fool around with 4.3 Flashed a couple of different ROMS, and none worked. Restored my backup of Cleanrom, and still no signal. It shows 4 bars, can receive an occasional text, but trying to text or make a call the signal drops away. Help!
Tim
Click to expand...
Click to collapse
when you flash, co you clean flash? and what recovery are you using? This info would help in getting your questions answered.
i've been running Mastamoon's unofficial 10.2 (Android 4.3) nightlies (http://forum.xda-developers.com/showthread.php?t=2385652), and regularly flash back and forth between TW Roms as well and have never had any real data problems. sure, drops data every once in a great while, but Mastamoon puts a lot of work into cleaning up issues.
one thing: IF you flash, and you don't have data, did you wait more than a couple of minutes? Sometimes it takes a while on first flashes. Also, did you check what your status said? (menu >system settings >about phone >status? Also, check to insure your mobile network is set up correctly (menu >system settings >more > mobile network settings) and check your CDMA subscription is set to RUIM/SIM and NOT NV, and network mode is set to LTE/CDMA/EvDo sometimes during a bad flash, these can get hosed up.
like i said, i run Masta's unofficial version, and go in and out of data areas (no data in the subway tunnels) and it always goes right back.
give that a try, and if still having problems, add more information befor just saying "i don't get any data with any 4.3 rom
goldsmitht said:
when you flash, co you clean flash? and what recovery are you using? This info would help in getting your questions answered.
i've been running Mastamoon's unofficial 10.2 (Android 4.3) nightlies (http://forum.xda-developers.com/showthread.php?t=2385652), and regularly flash back and forth between TW Roms as well and have never had any real data problems. sure, drops data every once in a great while, but Mastamoon puts a lot of work into cleaning up issues.
one thing: IF you flash, and you don't have data, did you wait more than a couple of minutes? Sometimes it takes a while on first flashes. Also, did you check what your status said? (menu >system settings >about phone >status? Also, check to insure your mobile network is set up correctly (menu >system settings >more > mobile network settings) and check your CDMA subscription is set to RUIM/SIM and NOT NV, and network mode is set to LTE/CDMA/EvDo sometimes during a bad flash, these can get hosed up.
like i said, i run Masta's unofficial version, and go in and out of data areas (no data in the subway tunnels) and it always goes right back.
give that a try, and if still having problems, add more information befor just saying "i don't get any data with any 4.3 rom
Click to expand...
Click to collapse
Good afternoon, and thanks for your help.
I wish I could give you more information, but I broke one of my cardinal rules about messing with my phone and didn't take notes. Suffice it to say I was trying a couple of different 4.3 ROMS in the forums, as well as the two available MIUI roms that were in there. I use TWRP.
I did wait quite a while before declaring no data, it has actually been a couple of days. It does show I have a signal, and I can get texts that are sent to me. When my wife tries to call my phone it goes right to voice mail, even when it does say I have a signal (4G, full bars). I also cannot send a text, it immediately goes to 'failed message'.
I tried setting my phone back to LTE/CDMA/EvDo, but I don't see an option for CDMA subscription. I wonder if I accidentally tried a Global ROM instead? All I am really looking for is some 4.2 love, I like what my daughters Nexus 4 has for lock screen widgets, and my Cleanrom installation is acting a little wonky now and again, so thought it was time to flash something new. Silly rabbit, trix are for kids.
Thanks again. Thinking of flashing a stock ROM and starting over. Any thoughts?
moonfarm said:
Good afternoon, and thanks for your help.
I wish I could give you more information, but I broke one of my cardinal rules about messing with my phone and didn't take notes. Suffice it to say I was trying a couple of different 4.3 ROMS in the forums, as well as the two available MIUI roms that were in there. I use TWRP.
I did wait quite a while before declaring no data, it has actually been a couple of days. It does show I have a signal, and I can get texts that are sent to me. When my wife tries to call my phone it goes right to voice mail, even when it does say I have a signal (4G, full bars). I also cannot send a text, it immediately goes to 'failed message'.
I tried setting my phone back to LTE/CDMA/EvDo, but I don't see an option for CDMA subscription. I wonder if I accidentally tried a Global ROM instead? All I am really looking for is some 4.2 love, I like what my daughters Nexus 4 has for lock screen widgets, and my Cleanrom installation is acting a little wonky now and again, so thought it was time to flash something new. Silly rabbit, trix are for kids.
Thanks again. Thinking of flashing a stock ROM and starting over. Any thoughts?
Click to expand...
Click to collapse
follow my last post; Mastamoon has his version of CM10.2 (4.3) running great, and is very quick at answers (during the week that is) as well a couple of other DEVs that follow that tread are always willing to offer help. AND he has a download app, that once you install will tell you when there is an update, give you a direct link to it, and after downloading, will check the MD5 to insure a good download.
providing you are on VZW that is.
I actually had this problem coming from hyper drive to dirty Unicorn. But i started out on the Droid X back in the day so I was used to it. While I don't know if this really works but it worked for me is do *22899 then *228# ( so the keyboard pops up ) i did it a few times also i turned it off the cell service and turned it back on using the toggle. While i dont know if that will do it it worked for me. I know LTE dont need do that because of the sim but it does for me in the hiccup.
A question i have that i cant post in the Dev Fourm because of lack of post. I been part of XDA for long time just never posted. But I'm running Dirty Unicorn and theres a option for fast charge but it does nothing. I've used this feature before and makes my car charger work better and home charging and my battery sucks now but does anyone know how to get it working? I've tried terminal did SU and FFC but nothing.
I'm running twrp recovery. I'm asuming the latetest version. And i do let it settle for a while. As for the settings you mentioned, everything is normal,and as it should be. The imei,meid, ect. Is normal. Thanks for the input.
I've fixed this by going full ODIN, putting a stock image back on, and following the instructions at http://forum.xda-developers.com/showthread.php?t=2066133 Seems to be working, it is no longer on roaming.
Tim
wily5150 said:
I try to keep up with latest os, but 4.3 has me baffled. The first time I tried to install 4.3 was on Jellybam 10.2. I followed the instructions to the tee, but it didn't work. All 4.3 roms I've loaded I've never had a signal. I don't know what I'm doing wrong. Now that all of the 4.3 roms have the custom recovery already on the rom, it still doesn't work. I have no signal. I thought about unrooting my sg3 and starting over, but that is a pain. So I'm basically stuck with 4.2.2. If anyone has anything to say about my problem please do so. Thanks
Click to expand...
Click to collapse
When I tried 4.2 and turned off data it completely killed my signal. None of my recoveries of 4.1.2 had signal. Flashing back to stock fixed the signal problem.
Hellfire and Dirty Unicorns have worked great for me since going to 4.3 and 4.3.1. I use cwm touch recovery but idk how much of an effect recovery has with flashing a rom successfully.
But this tool makes rooting, unlocking the bootloader, and recovery very simple and easy. (but I would flash the latest recovery after using the tool just in case)
http://forum.xda-developers.com/showthread.php?t=2332825
jailbreaktoroot said:
I actually had this problem coming from hyper drive to dirty Unicorn. But i started out on the Droid X back in the day so I was used to it. While I don't know if this really works but it worked for me is do *22899 then *228# ( so the keyboard pops up ) i did it a few times also i turned it off the cell service and turned it back on using the toggle. While i dont know if that will do it it worked for me. I know LTE dont need do that because of the sim but it does for me in the hiccup.
A question i have that i cant post in the Dev Fourm because of lack of post. I been part of XDA for long time just never posted. But I'm running Dirty Unicorn and theres a option for fast charge but it does nothing. I've used this feature before and makes my car charger work better and home charging and my battery sucks now but does anyone know how to get it working? I've tried terminal did SU and FFC but nothing.
Click to expand...
Click to collapse
I believe fast charge is kernel related and not because of a rom. I haven't ever used fast charge but all the kernel threads always list fast charge as a feature. But which DU build are you running?
This is a problem I've had persistently, I'm only just now getting annoyed enough to make a post about it.
When I first got my Nexus, everything was fine and dandy. Around the end of December though, I had this weird problem where Data turns itself off after about three seconds. I can turn it back on and let it turn off again and fight with it to solve the issue, and eventually it will stop and stay on. I figured I'd give the Cyanogenmod build (at the time) a try, and that fixed it, but had it's own problems (namely bluetooth being very horribad) so I swapped back to stock and sure enough, the problem returned. I don't recall if I did a nandroid restore or a fresh install and a titanium backup of my apps at first because I did try both, neither fixing the problem.
Nexus 5 16gig black on AT&T, stock ROM, only rooted. Any extra information can be posted upon request.
-[edit]-
I installed Paranoid Android, I'll update if I still have the issue.
-[edit+]-
Yes, the issue persists. New info is Paranoid Android v 4.2-BETA1. Obviously, hardware info stayed the same.
-[edit++]-
It appears it was an issue with Juice Defender. Will update if issue persists.
Sonic Offline said:
This is a problem I've had persistently, I'm only just now getting annoyed enough to make a post about it.
When I first got my Nexus, everything was fine and dandy. Around the end of December though, I had this weird problem where Data turns itself off after about three seconds. I can turn it back on and let it turn off again and fight with it to solve the issue, and eventually it will stop and stay on. I figured I'd give the Cyanogenmod build (at the time) a try, and that fixed it, but had it's own problems (namely bluetooth being very horribad) so I swapped back to stock and sure enough, the problem returned. I don't recall if I did a nandroid restore or a fresh install and a titanium backup of my apps at first because I did try both, neither fixing the problem.
Nexus 5 16gig black on AT&T, stock ROM, only rooted. Any extra information can be posted upon request.
-[edit]-
I installed Paranoid Android, I'll update if I still have the issue.
-[edit+]-
Yes, the issue persists. New info is Paranoid Android v 4.2-BETA1. Obviously, hardware info stayed the same.
Click to expand...
Click to collapse
Try another ROM that maybe AOSP source built, see if problem is persisting. If so, is data weak in your area for ATT and it sounds very possible your device has a hardware issue if other ROMs don't fix this. I'm running Carbon, no issues ATM. I can guarantee the CM issues and your issue are not present. If you try the ROM, problem persists, then device needs to be fixed for hardware I'd suggest.
RevelationOmega said:
Try another ROM that maybe AOSP source built, see if problem is persisting. If so, is data weak in your area for ATT and it sounds very possible your device has a hardware issue if other ROMs don't fix this. I'm running Carbon, no issues ATM. I can guarantee the CM issues and your issue are not present. If you try the ROM, problem persists, then device needs to be fixed for hardware I'd suggest.
Click to expand...
Click to collapse
It looks like it was an issue with Juice Defender.
Sorry I know I didn't mention that in the OP. :v
I'll post back if the issue continues now that Juice Defender is gone.
Sonic Offline said:
It looks like it was an issue with Juice Defender.
Sorry I know I didn't mention that in the OP. :v
I'll post back if the issue continues now that Juice Defender is gone.
Click to expand...
Click to collapse
Yes, saving battery by turning it off. Keep updated.
RevelationOmega said:
Yes, saving battery by turning it off. Keep updated.
Click to expand...
Click to collapse
It appears that was what it was. I have had zero issues since uninstalling it, which makes me sad. I liked Juice Defender, and have been using it on my phones for several years. :c